Documente Academic
Documente Profesional
Documente Cultură
CO
AL HOTY-STANGER LTD. CO
INDEX
Pages
1. A
General Information
1-15
1. B
S.A.S.O. Accreditation
16-33
2.0
Regional Laboratories
34-50
3.0
Specialist Departments
51-60
4.0
61-63
5.0
64-88
6.0
89-93
7.0
94-117
AL HOTY-STANGER LTD. CO
1.0
General information
Pages
1.1
2-3
1.2
4-5
1.3
Company Documents
6-15
1.4
Note: Company Financial Audited Statement is available upon request to Head Office
AL HOTY-STANGER LTD. CO
AL HOTY-STANGER LTD. CO
1.1
Al Hoty-Stanger Ltd. Co. is a limited liability company registered in Saudi Arabia and has traded since 1975
when the company was awarded its first contract with the Arabian American Oil Company (ARAMCO).
The Company operates a series of independent testing laboratories throughout the Kingdom. Current
laboratory locations are in Al Khobar, Jubail and Hofuf in the Eastern Province; Riyadh in the Central
Province; Jeddah and Yanbu in the Western Province of Saudi Arabia. In 1986, a purpose built laboratory
was opened in Dubai mainly to carry out petroleum and petroleum product testing, but was quickly expanded
to cover a full range of materials testing services. From these centers, the Company can mobilize testing and
inspection facilities to most other locations in Saudi Arabia and the Middle East. A further branch was
opened in Abu Dhabi, mid 1993, to perform a wide range of laboratory services.
Company activities include construction materials testing, water, chemical, soils, metallurgical testing and
analysis, non-destructive testing and inspection, failure investigation, paint and coating examination, polymer
and plastic, rubber and wood testing, asbestos identification and geotechnical investigation. Fully equipped
oil analysis laboratories offer services in lubrication, fuel, hydraulic, insulating oil and other fluid analysis.
Fully qualified personnel are available to design and implement inspection /testing programs tailored to
client's individual investigative requirements. These include complete QC and compliance testing schemes
backed by an extensive data processing facility.
The Al Khobar and specialist laboratories, located in a purpose-built head-office and laboratory complex in
the Thuqbah district of Al Khobar, were awarded the first National Laboratory Accreditation Certificate by
the Saudi Arabian Standards Organization (S.A.S.O.) in July 1988; accreditation by SASO has been on-going
ever since then. Al Hoty-Stanger Ltd. Co. is also operated to the ISO 9001:2008, registered by
Bureau Veritas.
Al Hoty-Stanger Ltd. Co. is associated with three other companies: Al Hoty Company Ltd., Al Hoty
Calibration Services and Al Hoty Pest Control.
The company maintains a working relationship with Stanger Consultants Ltd. in the UK which itself evolved
from Harry Stanger Ltd. (founded in 1874).
AL HOTY-STANGER LTD. CO
1.2
AL HOTY-STANGER LTD. CO
Company Name
AL HOTY-STANGER LTD.CO.
Address
Nature of Business
Operating
Ownership
Partners
Commercial Registration
Chamber of Commerce
Industrial License
Telephone
(013) 889-1000
Facsimile Number
(013) 898-1466
admin@alhotystanger.com
Web site
www.alhotystanger.com
Bankers
Riyad Bank
Al-Rayan Branch
P.O Box 274
Dammam-31411
Saudi Arabia
AL HOTY-STANGER LTD. CO
1.3
Company Documents
AL HOTY-STANGER LTD. CO
1.3
Pages
1.3.1
8-9
1.3.2
Commercial Registration
10-11
1.3.3
12-13
1.3.4
Industrial License
14-15
Financial Data
(Available Upon Request to Head Office)
AL HOTY-STANGER LTD. CO
AL HOTY-STANGER LTD. CO
10
Kingdom of Saudi Arabia
Ministry of Trade
C.R.No. 2051002999
Date: 06/07/1397H
COMMERCIAL REGISTRATION ENGLISH
Company
Nationality
Saudi Company
Period
Head Office
Telephone Numbers
Fax Number
Activities
Capital of Company
SAR 6,689,106.00
Directors
C.R. office of Dammam certifies that this company is registered in Al Khobar City. This C.R. is valid until 30/05/1435H (01/04/2014G).
Receipt No.
13455793
Date
Stamp
28/04/1434H
Mohammed Ali-Bayat
11
Signature
12
Chamber of Commerce
(English Translation)
Class: First
The Chambers of Commerce and Industry Eastern Province hereby certifies that:Al Hoty Stanger Ltd. Co. Independent Laboratories & Material Testing
C.R. No. (2051002999)-P.O. Box 1122 Al Khobar 31952
Is registered as member for this year, and this certification is valid till the end of 2014G
Issued on: 18/12/2013G (15/02/1435H)
Signature:
Receipt # 11/340789061
Official Seal
date of subscription: 30/08/1987G
12922
www.chamber.org.sa
any changes made on this certificate will not be valid
13
Al Hoty Stanger Ltd. Co. is a limited liability company registered in Saudi Arabia and has traded
since 1975.
After reviewing Article 1 of the report of Industrial Committee Meeting No. / 352 dated
6.8.1396H regarding the grant of license for Al HOTY STANGER INDEPENDENT TESTING
LABORATORIES and after evaluation Memorandum, the office of Representative for Industrial
Affairs enclosed its letter No. 3911 dated 30.7.1396H approves the project
Besides viewing the letter of Research and Industrial Development Center No. 2218 dated
13.4.1396H and the enclosed Evaluation Memorandum that the Research Center had prepared
and Al Hoty Stanger letter dated 21.8.1396H along with paragraph No.2 of the Investment
Regulations:
Following decision is made:
01-
0102-
A ministerial decree No. 381 dated 11/10/1402H to approve opening three laboratories affiliated
with Al Hoty Stanger Independent Laboratory, the said branches will be in Riyadh, Jeddah and
Al- Jubail so as to practice the same licensed activity of the head office in Al Khobar.
Approving amendment of the partners shares ratio in Al Hoty Stanger Independent Laboratory
Company.
Letter No. 2104/15 dated 23/08/1413H approving the opening of an office to follow up the
company activities in Al Hassa City.
14
15
1. B
Pages
17-25
1. B.1
1. B.2
1. B.3
27-28
1. B.4
Municipal Certificate
29-31
1. B.5
GOSI Certificate
32
1. B.6
Saudization Certificate
33
16
26
1. B.1
At an official ceremony held on the 4th July 1988 at the Dammam Chamber of Commerce, the
Director-General
of
the
Saudi
Arabian
Standards
Organization
(S.A.S.O.),
Dr. Khaled Al-Khalaf, presented the first laboratory Accreditation Certificate No. 1A to
'Al Hoty-Stanger Ltd.'.
Mr. David Harry Stanger received the certificate in the presence of over one hundred guests that
included officials from the Ministry of Commerce, representatives from the British Embassy and
Businessman's Association and many users of laboratory services from both public and private
sectors of Saudi Arabian industry and commerce.
The establishment of S.A.S.O. accredited testing and calibration laboratories will make a
significant contribution to the Saudi Arabian national quality campaign and support the
Regulations of Quality Mark, Certificate of Conformity and Accreditation Services designed to
help ensure competence and quality of services provided by accredited laboratories.
This event must be of special interest to the users of laboratory services and consumers seeking
quality products.
17
18
19
20
21
22
23
24
25
26
27
28
29
Kingdom of Saudi Arabia
Meteorological & Environment Protection Department
Environment Qualification Certificate No. TM/78/20
Date
21/07/1420H
:
:
:
:
Al-Hoty Stanger
P.O. Box 1122 Khobar 31952
Performance of analysis of water and dangerous solid wastes.
Water, Solid & semi-solid materials, municipal and Industrial Liquid Wastes.
In accordance with the Article (32) of Ordinance Basic Regulations issued by Royal Decree No. A/90 dated 27/8/1412H and after reviewing the
information presented to the Department and the available equipment during the visits that we made by the Concerned Officials of the Department to AlHoty Stanger Laboratory in Eastern Province.
The General President of Meteorological & Environmental Protection Department, as per his legally vested powers, hereby approves to given the said
Laboratory this certificate for a period of two years from its date for carrying out the mentioned activity but shall comply with conditions mentioned in
the attached letter and also observe the instructions issued by the other Relevant Authorities.
Copy with regards to: Director, Meteorology & Environment, Eastern Province for follow-up.
30
31
32
33
2.0
Regional Laboratory
Pages
2.1
Al Khobar
35-36
2.1A
Hofuf
37-38
2.2
Jubail
39-40
2.3
Riyadh
41-42
2.4
Jeddah
43-44
2.4.1
Yanbu
45-46
2.5
U.A.E
47-50
34
2.1
Address
General Manager
Hani Al-Hoty
Telephone Numbers
(013)889-1000
Facsimile Number
(013)898-1466
admin@alhotystanger.com
The Al Khobar Regional Laboratory is located in the head-office laboratory complex (see location map).
Contracts completed since 1975 include several with Aramco and other organizations involved in the oil
extraction, gas, and power plant and construction industries of the Eastern Province.
Backed by extensive chemical and metallurgical facilities, the laboratories offer the following range of
services to SASO, ASTM, BS, DIN and other appropriate National/international standards: 2.1.1
Complete engineering soils test facilities including provision of qualified and experienced
personnel for field inspection and sampling.
2.1.2
Physical and chemical testing of soils, aggregates, concrete and concrete products, and
bituminous materials including coring and non-destructive testing.
2.1.3
2.1.4
Inspection and testing of cement and other cargo imported into Dammam and Jubail
commercial/industrial ports. Recent materials tested included timber, marble, fly ash and
pigments.
2.1.5
35
36
2.1A
Address
Telephone Numbers
Facsimile Number
(013) 587-1420
ahshofuf@alhotystanger.com
Established in September 1992, the Hofuf laboratory offers a wide range of construction materials testing
encompassing soil, concrete and concrete products, asphalt and related materials.
Al Khobar based specialist departments offer their support for NDT, Geotechnical, Metallurgy, failure
investigation, comprehensive chemical and other specialized work.
37
38
2.2
Address
Regional Manager
Rami Yaghi
Telephone Numbers
(013) 341-6790/91/92/93/94
Facsimile Number
(013) 341-0642
rami.yaghi@alhotystanger.com
Established in early 1979, the Jubail Regional Laboratory serves the Madinat Al Jubail Al- Sinaiyah
Project, itself under the jurisdiction of the Royal Commission for Jubail and Yanbu. The facility is a 2000
square meter purpose-built laboratory, currently employing an experienced team of approximately thirty
(30) qualified engineers, technicians and supporting staff. The facility is located in the Support Industry
Park of Jubail Industrial City.
Al Hoty-Stanger completed three successive contracts for Materials Testing Services to the Royal
Commission. It also provides independent materials testing to other contractors completing construction
or service contracts on the Jubail project including quality control/assurance services to established
industries.
The laboratory issues daily reports relating to tests and analyses of concrete, soils, aggregate, asphalt and
water using standard methods stipulated in the appropriate specifications. Testing in more specialized
areas such as chemical, metallurgical or geological is also available and an expertise in carrying out
testing unavailable elsewhere in the Kingdom has been developed over the years. An area where Al HotyStanger Ltd. has been particularly active has been in the investigation of cracking/corrosion problems in
reinforced concrete. Staffs in Jubail have provided research test data to support technical papers presented
to national and international conferences by Al Hoty-Stanger personnel.
The Jubail laboratory has frequently been commissioned to carry out full-scale investigative projects in
the Eastern province. Major investigations completed include:
Studies of premature failure of reinforce concrete
Surveys of concrete and asphalt plants
Surveys of Eastern Province quarries
Assessment of permeability and shrinkage of local concrete
Monitoring of concrete hydration temperatures
Survey of thermal conductivity of soils, sands and concrete
The staffs are assisted by a fully equipped computerized data processing unit.
39
40
2.3
Address
Regional Manager
Teofilo Cabal
Ayman Tanninah
Telephone Numbers
(011) 478-4292/478-3289
Facsimile Number
(011) 479-2058
ahsriyadh@alhotystanger.com
The Riyadh laboratory was established in late 1977 and has subsequently twice moved to new and
enhanced premises to accommodate the continued expansion of the services offered.
The laboratory provides the facilities to test constructional materials to include soils, aggregates, concrete,
and concrete and asphalt products. Additionally, the Non-destructive Testing (NDT) department offers
services for the testing and inspection of welding and welder's qualifications.
The Riyadh laboratory staffs constitutes experienced civil, structural and materials engineers, geologists,
chemists, and employ NDT and civil technicians to provide a comprehensive service in inspection and
testing both in the laboratory and on-site. The services offered include failure investigation;
crack/corrosion investigation of reinforced concrete, structural assessment and additionally a chartered
geologist provide advice on geotechnical projects and exploration for raw construction material.
Support is also given by the Al Khobar based Specialist Departments in oil testing, detailed chemical
analysis, metallurgy, geotechnical and related services.
The geographical situation of the laboratory (see the location map) affords the mobilization of staff and
equipment within the Central Province of Saudi Arabia.
41
42
2.4
Address
Regional Manager
Jamie Mackintosh
Telephone Numbers
(012) 660-1924/665-5865
Facsimile Number
(012) 665-6742
jamie.mackintosh@alhotystanger.com
The Jeddah Laboratory, established in 1979, currently employs some 20 experienced engineers,
technicians and support staff that provide both laboratory and site testing facilities for soils, concrete and
asphalt. In addition, suitably qualified personnel are available to witness, monitor or sample in specialized
fields such as metallurgy (including inspection), chemistry, lubrication, oil analysis and general quality
control procedures.
Jeddah region has its own local Geotechnical Department with qualified Geologists to undertake and
supervise a full range of site investigation and geological services.
The Jeddah laboratory is fully equipped to perform cement testing to either ASTM or BS requirements
and has long experience of testing both indigenous Saudi and imported cements.
The Jeddah staff has expertise in the in-service assessment of buildings or other structures including
failure investigation and subsequent evaluation of the structural implications of distress or failure.
Full back up from the Al Hoty-Stanger specialist departments is available and when necessary, a rapid
dispatch service of samples from Jeddah to Al Khobar ensures timely provision of results to clients.
The proximity of the laboratory to Jeddah Islamic Port provides a convenient facility for sampling,
inspection and testing of cement, grain and other imported cargo.
43
44
Address
Regional Manager
Jamie Mackintosh
Babukuttan Pillai
Telephone Numbers
Facsimile Number
(014) 391-7471
babu.pillail@alhotystanger.com
In early 1994, Al Hoty-Stanger Ltd. opened a new branch in Yanbu to offer a wide range of laboratory
services.
The facility now provides an extensive range of services in the field of materials testing including soils,
concrete and constituents, concrete products. Yanbu laboratory is provided support by our Jeddah
Regional Laboratory as well as from Al Khobar (Head Office) for metallurgical, NDT, Geotechnical, and
failure investigation and other specialized work.
45
46
2.5
U.A.E. OPERATIONS
Address
General Manager
John Bainbridge
Telephone Numbers
(+971-4) 347-2201
Facsimile Number
(+971-4) 347-2727
admin@alhotylab.ae
47
Calibration Services
Calibration services are offered for a wide range of equipment. Mechanical capabilities include
mass, force, pressure, torque, density and hardness. Electrical resistance, AC/DC voltage and
current as well as humidity and temperature measuring devices are within AHSL's scope of
activities. All calibrating instrumentation is traceable to national standards, (NPL, NISR, SASO
or similar). All calibration certificates issued record this traceability.
Environmental Testing
Analysis of water and wastewater in Dubai and microbiological testing of food, water and other
commodities in Abu Dhabi have been established for some years. Recent diversification allows
the provision of services for flue gas analysis of chimneystacks and environmental noise
assessment.
Inspection Centre
AHSL is the approved Middle East inspection body for Underwriters Laboratories Inc. (UL) of
the United States, providing inspection of manufacturing processes and products for
specification conformance and safety. The UAE operation is approved by SASO for testing of
products destined for re-export from UAE to Saudi Arabia.
The company employs over 400 qualified personnel and retains the services of a number of
consultants to expand its specialist consulting capabilities. This includes the evaluation of
structures using core testing and non-destructive techniques. Sophisticated pile integrity test
equipment based on impedance profiling methods provides significant technical benefits to this
activity.
AHSL provides technical manpower for field inspection, sampling and testing and men and
equipment for staffing and operating site construction materials laboratories.
For further information regarding AHSL activities please see the Summary of Company Data
attached.
AHSL Summary of Company Data
Company Name
AI Hoty-Stanger Laboratories
Nature of Business
Ownership
Partners
Address
Hani Abdul Aziz Al Hoty & Legal heirs of Mr. Abdul Aziz Al Hoty
(Saudi Arabian)
David Harry Stanger O.B.E. (British)
48
:
:
Professional License
Telephone
04 3472201 (Dubai)
Contact Person: O. Mathew, Branch Manager
Facsimile
:
:
:
alhoty@emirates.net.ae
Bankers
Chamber of Commerce
49
50
3.0
Specialist Departments
Pages
52-53
3.1
Chemistry
3.2
Microbiology
54
3.3
Inspection/Non-Destructive Testing
55
3.4
Mechanical/Metallurgical
56
3.5
Oil Analysis
3.6
Geotechnical
59
3.7
Special Activities
60
57-58
51
3.1
Chemistry Department
Address
Head of Department
Naeem Zaidi
Telephone Numbers
(013)889-1000 Ext:128
Facsimile Number
(013)898-1466
naeem.zaidi@alhotystanger.com
The Chemistry Section of Al Hoty-Stanger Ltd. was originally a support service to the Soil and Geotechnical
Division. Subsequent diversification and expansion of available facilities has provided a thriving department
offering a comprehensive range of high quality laboratory testing. The department is located in the head-office
laboratory complex. (See location map in Section 1).
The department is fully equipped with sophisticated equipment capable of performing a wide range of tests to
ASTM, AASHTO, SASO, BS and other appropriate standards.
Areas of particular expertise include:
a)
Silicate Chemistry - Cement, lime, concrete, aggregates, plaster, cementations raw materials.
b)
Water Analysis (1) Chemical and bacteriological [American Public Health Association and World Health
Organization Standards]; (2) Leach ate examination to ascertain pollution and contamination levels in
groundwater; (3) Sewage analysis and treatment; (4) Chlorination techniques for disinfections of pipelines
and water storage; (5) Analysis for aggressiveness toward civil engineering materials; (6) Assessment of
chemical/toxic contamination.
c)
d)
e)
f)
g)
Agricultural Testing - Soil and water for suitability for use in agriculture/ horticulture.
52
h)
i)
Checking and troubleshooting in food and beverage industries including micro- biological and biochemical
testing.
j)
Asbestos Testing
k)
53
3.2
Microbiology Department
Address
Head of Department
Naeem Zaidi
Telephone Numbers
(013)889-1000 Ext:128
Facsimile Number
(013)898-1466
naeem.zaidi@alhotystanger.com
The Microbiology Section of Al Hoty-Stanger Ltd. Was originally a support service to the Food, feed and water
quality. Subsequent diversification and expansion of available facilities has provided a thriving department offering
a comprehensive range of high quality laboratory testing. The department is located in the head office laboratory
complex. (See location map in section 1).
1)
Checking and troubleshooting in food and beverage industries including microbiological and biochemical
testing. The department is fully equipped with sophisticated equipment capable of performing a wide range
of tests to AOAC, BAM, AWWA and other appropriate standards.
B)
Food and animal feed analysis as per SASO, CCFRA, BAM, and AOAC.
C)
Food implicated illness: monitoring food implicated illness or food intoxication for microbiology.
D)
Hygiene monitoring and Environmental Pathogen Monitoring: -Environmental Pathogen monitoring for
different companies and personnel hygiene for their employees.
E)
Testing the Efficacy of Disinfectant: Testing the efficacy for different chemicals against different
microorganisms.
F)
Soil and Water Soil and Water for suitably discharge to the sea.
54
3.3
Address
Head of Department
Syed Ansar
Nagesh Balraj
Telephone Numbers
(013)889-1000 Ext:135
Facsimile Number
(013)898-1466
syed.ansar@alhotystanger.com
This department located in the head-office laboratory complex (see location map in Section 1), offers a wide range
of inspection and testing services. These include:
1)
2)
3)
A full range of non-destructive tests - radiography, ultrasonic, magnetic particle, dye penetrant, holiday
detection.
4)
Sampling and chemical analysis of metals and alloys for identification to international specifications.
5)
55
3.4
Address
Head of Department
Syed Ansar
Nagesh Balraj
Telephone Numbers
(013)889-1000 Ext:135
Facsimile Number
(013)898-1466
syed.ansar@alhotystanger.com
This department, located in the head-office laboratory complex (see location map in Section 1), offers testing
services in accordance with ASTM standards in the areas of optical microscopy, in-situ metallography, quantitative
metallography, mechanical testing, structure-property correlation and failure analysis of metal products. These
include:
1)
Cutting, mounting, surface preparation (by grinding, polishing and etching) and microscopic/microstructure
examination of metals and alloys.
2)
3)
4)
5)
6)
Bend and tensile testing of metallic and other materials, e.g., fiberglass.
7)
8)
Structure-property correlation.
9)
10)
Sampling and chemical analysis of metals and alloys for identification to international specifications.
56
3.5
Address
Head of Department
Naeem Zaidi
Telephone Numbers
(013)889-1000 Ext:128
Facsimile Number
(013)898-1466
naeem.zaidi@alhotystanger.com
The Oil Analysis Laboratory is located in the head-office laboratory complex (See location map in
Section 1).
The laboratory offers a comprehensive range of tests on petroleum products to IF, ASTM and other
relevant specifications. Products tested include crude oil, lubricating oils, fuels, gear oils, hydraulic fluids
and insulating oils. Tests, generally tailored to individual requirements, may be conducted on either new
or used petroleum products.
Unused products such as diesel or turbine fuel are normally tested for conformance to physical and
chemical criteria specified in relation to a particular engine model. Relevant properties include sulfur
content, flash point, gravity and heating value.
Used petroleum products, sampled from an operating system, are tested as a diagnostic technique, not
only for the oil itself (contamination, oxidation) but also to identify wear and tear on the mechanical
system, which may often be intense in the Middle Eastern environment.
The testing of used lubricating oil as a preventive maintenance tool is used by the armed forces, airlines,
merchant fleet operators, oil companies and many other heavy equipment users throughout the Gulf.
Properties assessed may be physical fuel dilution, total solids, water contamination, viscosity and total
acid or base number. Spectrochemicals tests determine the extent of dissolved wear metals in the oil.
57
The Oil Analysis Department is fully equipped with sophisticated analytical equipment including a
computerized Atomic Emission Spectrometer and Infrared Spectrophotometer, in addition to dielectric,
distillation, and calorimeter and viscosity equipment.
The recent installation of a Gas Chromatograph equipped with both thermal conductivity and flame
ionization detectors enables the laboratory to test gaseous fuels for composition, test environmental
samples and breathing air for contaminates and determines the dissolved gas content in insulating oil.
58
3.6
Geotechnical Department
Address
Geotechnical Consultant
Rami Yaghi
Fadi Khalifa
Telephone Numbers
(013)889-1000 Ext:185
Facsimile Number
(013)898-1466
fadi.khalifa@alhotystanger.com
The Geotechnical Department is based at the head-office laboratory complex (see location map in Section 1).
The department provides a comprehensive site investigation and foundation evaluation service throughout the
Kingdom with full support from the company's regional laboratories. The department is largely concerned with
assessment and design of foundations for a wide variety of structures including housing, community facilities, office
and commercial developments, power transmission lines, water towers, coastal and offshore engineering works and
other industrial developments and infrastructure. Resource surveys for suitable fill materials, aggregates for concrete
and raw materials for cement manufacture have also been undertaken.
Staffing comprise of a group of qualified engineers and geologists who are responsible for the technical direction of
field investigations, the formulation of in-situ and laboratory testing programs and the preparation of geotechnical
reports. Laboratory facilities include a comprehensive range of soil and rock mechanics tests.
The department is increasingly involved in the study of post-construction geotechnical investigations such as rising
groundwater tables, hydro chemical problems, subsidence, and swelling sub-soils. It is well qualified to conduct
investigations to establish the causes of such problems and to offer specialist advice on remedial measures.
59
3.7
Address
Head of Department
Telephone Numbers
(013)889-1000 Ext:189
Facsimile Number
(013)898-1466
imran.shahid@alhotystanger.com
The section is located in the head-office laboratory complex (see location map in Section 1).
The section function is to assemble and direct teams with the correct personnel and equipment mix to undertake
programs in the following product and process areas:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
The section draws upon both in Kingdom Al Hoty-Stanger personnel as well as specialist personnel from affiliated
or other foreign companies.
60
4.0
UK
KSA
UAE
KSA
KSA
KSA
KSA
UAE
David H. Stanger
Hani A. Al-Hoty
John Bainbridge
Anwar H. Khan
Dr. George A. Korobokis
Abdu Mohammed Amin
Ibrahim Al Ghunaim
Chris Rajamini
Regional Managers
Hofuf
Jeddah
Jubail
Riyadh
Yanbu
KSA
KSA
KSA
KSA
KSA
Riyaz A. Shaikh
Ayman A Tanninah
Rami Yaghi
Teofilo Cabal
Ayman A Tanninah
B. Sc. (Hons.)
B. Sc. (Civil)
B. Sc., M. Sc. (Geotechnical).
B. Sc. (Chemical Engineering) R.M
B. Sc. (Civil)
Abu Dhabi
Dubai
Jebel Ali
Sharjah
UAE
UAE
UAE
UAE
John Bainbridge
John Bainbridge
Oomman Mathew
John Bainbridge
B. Sc.
B. Sc.
B. Sc.
B. Sc.
Department Managers
Khobar-NDT
Khobar-Chemical
Khobar-Geotech
Khobar-C&S
Khobar-IT
Khobar-Polymer
Khobar-Chief Accountant
Khobar-Gen. Ser.
Khobar-QA/QC
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
Syed Ansar
Naeem Zaidi
Fadi Khalifa
Abdul Nessir K.H.
Ghalib Asathulla
Junaid Shaikh
Raul Cleofas
Hussain Najjar
Mohd. Imran Shahid
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
Diosdado Melo
Cesar Flores
Ayman Tanninah
Zuhair Abu Zaid
Hosam Rasmi
Mohamed H.Abou Elella
Allan Erpelo
Vergel Cabal
Abdul Matin
Rafiq Mazen Al Rajabi
Riazul Hasan
Roberto Leal
Naeem Siddique
Adriano Naoe
Pappy Varghese
V.P. Abdulaziz
Yusuf Al Rashid
Civil Engineering
and Geotechnical
61
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
Polymer, Inspection,
Mechanical and
Metallurgical
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
Asjad Hussain
Luis D. Hermogenes
Bernard T. Penuliar
Romulo De Leon
Rommel Apuada
Paul Rodrigues
Babukuttan Pillai
Wendelito Relegano
Solomon J. Mathew
Joby Jose
Arman Ahmed
Carlo Angelo Leviste
B.A.,DPE (Polymer)
B. Sc. (Electrical Engineering), RTFI
B. Sc. (Mechanical Eng.), (L-ll PT/MT/PT)
M. Tech (L-II RT/MT/PT) + RTFI
B. Sc. (Aeronaut.), (L-ll RT/UT/MT/PT) + RTFI
B. Sc. (L-II RT/MT/PT) + RTFI
AWS-CWI (L-II RT/UT/MT/PT)+RTFI
B. Sc. (Civil Engineering), AWS-CWI
CSWIP
AWS-CWI (L-II RT/MT/PT)
AWS-CWI (L-II RT/MT/PT)
B. Sc. (Mechanical Engineering)
Material Analysis
KSA
KSA
Analytical
KSA
KSA
Mohd. Hanifa
Waseem Abdul
Oil/Fuel
KSA
KSA
KSA
KSA
KSA
KSA
Larry Dagui
Manzoor Khan
Mohd. Neyaz Ahmed
Abdul Rasheed Abdul
Joel Valderama
Mariano Ross
B. Sc. Chemistry
B. Sc. Chemistry
B. Sc. Chemistry, Dip. Petroleum Technology
B. Sc., M. Sc. Chemistry
B. Sc.
B. Sc.
ARAMCO Projects
KSA
KSA
Akhter Siddiqui
Shoaib Pattan Khan
B. Sc. Chemistry
B. Sc. Chemistry
Electrical
Microbiology
KSA
KSA
KSA
62
Asbestos
KSA
Faiyaz Ahmed
NDT RSO
KSA
KSA
KSA
KSA
KSA
KSA
NDG RSO
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
KSA
Usman Khan
Riazul Hasan
Rami Yaghi
Ayman Tanninah
Fadi Khalifa
Rafiq Al Rajabi
Ahmed Omar
Hosam Rasmy
Shaher Hameed
DME
M. Sc. Geology
B. Sc., M. Sc.
B.E. (Civil)
B. Sc. (Geology)
B. Sc. (Civil)
B. Sc. Chemistry
B. E. (Civil)
B. Sc. (Civil Engineering)
Transportation RSO
KSA
KSA
Vijay Laxmi
Jeril Dev
QA/QC
KSA
KSA
KSA
KSA
KSA
IT Dept.
KSA
Hatem M. Moukhtar
GRO & HR
KSA
Morsy Abuzaid
Legend:
63
5.0
Pages
5.1
65-74
5.2
75-79
5.3
80-84
5.4
Analytical Services
86
5.5
Polymer Testing
87
5.6
88
NOTE:
The enclosed listing of clients, completed projects and on-going projects covers the period from 2000 to
2011. The lists of completed projects from its formation in 1976 to 1999 are stored in our data bank.
64
In Kingdom Experience:
Date Start
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
Date
Completed
2002
20013
20013
20013
2001
2001
2002
2002
20013
20013
20013
2002
2001
20013
2004
2004
2002
2004
20013
2001
2001
2001
20013
20013
2005
2001
2000
2001
2001
2002
2001
2002
2002
2002
2002
2001
Client
SBG-PCM Div.
Nasser S. Al Hajri (Yan-Jed)
Al Suwaidi Est.
House of Investment (ASBI)
Al Hammam Co.
Al Mabani Gen. Construction
Al Arabian COWI
Al Mabani Gen. Construction
Bechtel
Saudi ABV
Al Fanar Company
A.A. Turki Corporation
Madi Al Hajri
Cooling World Center
Arabian Contg Co.
Yuksel Insaat S.A. Co.
Abcon Arabia Ltd.
Nasser S. Al Hajiri Crop.
Ali H. Ghamdi Est.
Ali H. Ghamdi Est.
AGAP Arabia Ltd.
AGAP Arabia Ltd.
Nasser Al hajri
Saudi ABV
Mastourah for Trading
RB Hilton
ABB Contracting Co.
Al Hammam Co.
Al Muhaidib
Assad Said Corp.
M.S. Al-Suwaidi Est.
M.S. Al-Suwaidi Est.
Impregilo SPA
Al Hasa Ready Mix Co.
Saudi Ready Mix Co.
Abdul Ali Al Ajmi Est.
65
In Kingdom Experience:
Date Start
2000
2000
2000
2000
2000
2000
2000
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
Date
Completed
20013
2002
2001
2002
2002
20013
2005
2004
2004
2004
2005
20013
20013
20013
20013
2005
20013
20013
20013
2005
20013
20013
20013
2004
2002
20013
2002
20013
20013
2001
20013
20013
2002
20013
2001
Client
Al Houssain & Al Afaliq Co
Muan Modern Est.
Madi Al Hajri & Partners
Al Yamama Co.
Teamwork
Almacon
A.F.H. Al Dossary Est.
CCC W.L.L.
AYTB
ELELPOWER
Issam Kabbani & Partners
Ali H. Ghamdi Est.
SBG-PCM Division
SBG PCM Division
Jamjoom
S.S.T.
SBG IPP
Metal Services
KAMCO # 1
Huta-Sete
ENELPOWER
Swayeh Co.
Azzam Trading
Azzam Trading
Al Mabani Gen. Cont.
Al Jaman Est.
Al Fanar Co.
J & P Co. Ltd.
Nabil A. Abu Nhaya
Al Othman Plastics
JOMAC
JOMAC
MS Al Suwaidi
Al Macon
Petrokemya
66
In Kingdom Experience:
Date Start
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
Date
Completed
20013
2002
20013
2002
20013
20013
20013
2004
2005
2002
20013
2004
2004
2004
2004
20013
2002
20013
20013
20013
20013
20013
2001
20013
20013
20013
20013
2002
20013
20013
20013
20013
20013
20013
20013
Client
NESMA Sharqi
INMA Steel
TEKFEN
ALMACON
CCC W.L.L.
Raymond S.A. Ltd.
Larsen & Turbo SA
EID Contracting
AATCO Contracting
Daewoo S.A. Ltd.
Saudi Al Terais
Haif Contracting
Al Tamimi
SBG - PCM Division
Al Khatlan
J&P
Al Khodari & Sons
SBG PCM Division
Issam Kabbani
Al Mabani
M Khodari
ALISHAR
ASHA
Guest Palace Manama
S.S.T.
Salim Al Yami & Partners
Dodsal & Co.
AARTCO
Madaf Telecom
Al Mozoon Group
LATCO
Hadi Haider Co.
AARTCO
ACC
Al Kholood
67
In Kingdom Experience:
Date Start
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
Date
Completed
2002
20013
20013
2002
2002
20013
20013
20013
20013
20013
20013
20013
20013
20013
2004
20013
20013
2004
2004
2004
2004
20013
2002
20013
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
Client
Nasser Al Hajri
Hanoo AL Suwaiket
Al Yamama
Al Fanar
Nabil Abu Nhaya & Part.
J&P
Technip SA Ltd.
J&P
Nasser S. Al Hajri Corp.
Yuksel
Al Yamama
Larsen & Toubro
Al Ojaimi Contracting EsT.R
FAFCO
A.A. Turki Corp.
KAMCO
SBG, Jeddah
SBG, Jeddah
KAMCO
Al Khodari
FAFCO
SA Kent
Al Sari Contracting Est.
Almacon
SSEM
Issam Kabani
Bin Quraya
Al Hammam Co.
Al Osais
Al Suwaidi Est.
Al Khodari
Latifia Co.
Madaf Telecom
Civil Works Co.
Dames & Moore
68
In Kingdom Experience:
Date Start
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
Date
Completed
2002
20013
2002
2002
20013
2002
2002
20013
2002
20013
20013
2004
2004
20013
2004
2004
2004
2004
20013
2004
2004
2004
2004
2004
2004
20013
2004
2004
2004
2004
2005
20013
20013
2004
20013
2004
Value/
SR
50,000
20,000
25,000
50,000
100,000
20,000
25,000
600,000
20,000
150,000
50,000
75,000
50,000
100,000
35,000
65,000
44,000
360,000
200,000
50,000
75,000
25,000
500,000
85,000
25,000
75,000
30,000
75,000
100,000
125,000
80,000
50,000
25,000
50,000
50,000
25,000
Client
Al Arrab Est.
Al Mutawa Est.
McConnell Dowell
MEEDCO
Wadi Al Khaiala
Al Rubian
Al Fahad Est.
CCC WLL
Madi Al Hajri
L&T
SCC
AARTCO
Al Latifia Trading & Cont
AARTCO
Zamel & Turbag Co.
United Feed Co.
ABB Contracting Co.
Butler
Saudi Aramco Yanbu
Al Amoudi United Co.
Watani Trading Co.
Saudi Aramco
Al Mabani
Al Qadi Contracting
Shilah Al Jazira Co
Al Mashrik
Saudi Binladin Group
Saudi Binladin Group
Xenel Group
Saudi Condreco/Al Mabani JV
Al Eraini Contracting
Carlo Gavazzi
Bin Quraya
Al Rashid HAK
Zahrat Al Sahra
SST / Al Fanar
69
In Kingdom Experience:
Date Start
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
Date
Completed
20013
20013
20013
20013
2002
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2006
2004
2004
2004
2004
2004
2005
20013
20013
2004
20013
2004
2005
2004
2004
Value/
SR
50,000
150,000
50,000
50,000
35,000
100,000
200,000
200,000
400,000
600,000
100,000
200,000
150,000
150,000
75,000
150,000
300,000
120,000
300,000
500,00
250,000
75,000
200,000
250,000
190,000
1.5M
650,000
100,000
100,000
75,000
55,000
75,000
35,000
20,000
50,000
Client
Ramal Al Baidah Cont.
Snamprogetti
Al Bushair Est.
Al Yaseen Transp. Est.
First Telecom Industries
Al Kifah Co.
Saudico
RTCC
Metal Services Co.
Metal Services Co.
Mana S. Al Khamzan Est.
Azzam Trading & Cont. Est.
Azzam Trading & Cont. Est.
Azzam Trading & Cont. Est.
Arabian Contracting Co.
Ashi & Bushnag Co. Ltd.
Al Suwaidi Indl Services
Issam Kabbani & Partners
Metal Services Co.
Metal Services Co.
Fast Contracting Co.
Eastern Projects
Al Yamama
Saudi Archirodon
Al Yamama
Metal Services Co.
Arkal Est.
Raymond Saudi Arabia
KAMCO
RB Hilton
Basmah Trading
Kamco
Kamco
Al Mashariq Co.
RTCC
70
In Kingdom Experience:
Date Start
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
Date
Completed
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2005
2005
2004
2005
2005
2005
2005
2005
2005
2004
2005
2005
2005
2005
2004
2006
2005
2005
2005
2004
2006
2004
20013
2004
Value/
SR
50,000
50,000
200,000
150,000
80,000
20,000
50,000
100,000
250,000
400,000
80,000
80,000
80,000
50,000
1.5M
200,000
150,000
50,000
200,000
150,000
180,000
100,000
100,000
150,000
150,000
150,000
50,000
50,000
25,000
25,000
50,000
35,000
65,000
150,000
100,000
Client
Al Sharq Est.
SBTMC
Bakri Internationaal
A.F.H. Al Dossary Est.
Al Fozan Contracting Co.
Al Najdai Est.
Al Bourdge Est.
A.R. Al Shalawi Est.
A.F.H. Al Dossary Est.
Nasser S. Al Hajri Corp.
Al Suwaidi Indl Services
A.F.H. Al Dossary Est.
Fast Contracting
RTCC (Rakan)
Metal Services
Ahmed Al-Kadi Est.
Fast Contracting
International Center Co.
CCC
Nasser S. Al Hajri Corp.
RB Hilton Saudi Arabia
RTCC
Saudi Build
Huta Sete
SSEM / Saudi Build
Al Ojaimi
Atiah M. Al Thobaiti
Hashem Cont. & Trading
Al Rajhi Est.
Riyadh Komana
SBG PCM
KAMCO
Arabian Contracting
Al Angari Co.
Nesma Al Fadl
71
In Kingdom Experience:
Date Start
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
Date
Completed
2005
2005
2005
2005
2005
2005
2005
2005
2006
2006
2005
2005
2005
2005
2005
2005
2005
2005
2005
2005
2005
2006
2006
2006
2006
2006
2005
2006
2005
2005
2005
2005
2005
2006
Value/
SR
150,000
40,000
150,000
20,000
50,000
50,000
150,000
75,000
75,000
243,200
150,000
100,000
60,000
100,000
80,000
80,000
200,000
80,000
70,000
50,000
150,000
100,000
200,000
50,000
200,000
30,000
25,000
50,000
30,000
20,000
50,000
50,000
50,000
75,000
Client
Nesma Al Fadl
Gamma Al Mushegah
Nassir Al Hajri
A.H. Al-Mutawa Cont. Co.
M. Abdulaziz Al Rajhi Est.
Nabil A Abu Nhaya & Partners
Khaled A Al Mulhem & Bros
Khaled A Al Mulhem & Bros
Al Jafr Trading & Contracting
SBG PCM Div.
Al Latifa Trading
Al Kifah
Al Kifah
RTCC
Rashid Al Magour
Rashid Al Magour
Al Fanar
Al Fanar
Nour Comm
SEO-Kwang
GAMA
Al Shalawi Est. / C.B.E.
Nasser S. Al Hajri Corp.
M. Abdulaziz Al Rajhi Est.
Arabian Bemco/Truba Arabia
ICC
Al Latifia Contracting
Al Ojaimi
Obaid Al Salmi
ARCON
BAK for Roads
KAMCO
Al Mobty
Al Bushair Trading & Contg.
72
In Kingdom Experience:
Date Start
20013
2005
2005
2005
2004
2005
2005
2005
20013
2004
2005
2005
2004
2005
2004
2004
20013
2002
2005
2005
2005
20013
20013
2005
2005
2005
2005
2005
2004
2004
2005
2005
20013
2005
2005
2005
Date
Completed
2006
2006
2006
2006
2006
2006
2006
2005
2006
2006
2006
2006
2006
2006
2006
2006
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Value/
SR
70,000
20,000
35,000
15,000
50,000
50,000
50,000
25,000
35,000
30,000
30,000
30,000
50,000
30,000
25,000
35,000
500,000
350,000
800,000
1.2M
120,000
700,000
300,000
150,000
300,000
75,000
100,000
25,000
300,000
150,000
50,000
75,000
150,000
50,000
250,000
175,000
Client
Eastern Projects Contracting
Eastern Projects Contracting
Bin Quraya Est.
Al Bushaier Co.
Al Bushaier Co.
Al Ojaimi Contracting Est.
Al Arrab Contracting Co.
Al Mulhim Steel Building
Al Yaseen Transport Est.
Matouq M. Al Beladi for Civil
Fahad Al Hammdi
NESCO
Abdullah Ibrahim Al Sayegh
Ayish Al Saleh Est.
Obaid Al Salmi Est.
Saleh Bu Ali Est.
GAMA Co.
Latifia Co.
AZRB
SEC
Luluat
URS Dames & Moore
Al Kifah Est.
Al Shahin
ABV Rock-Qassim
AARTCO
Eastern Trad. & Contracting
SSEM
Al Yamama Co.
SSEM
Shamael Al Khaleej
Huta Hegerfeld
Yuksel Insaat S.A.
FEMCO
CCC
CCC
73
In Kingdom Experience:
Date Start
2005
2005
2005
2005
2005
2004
2002
2004
2005
2005
2004
2005
2005
2006
2007
2007
2008
2008
2008
2008
2009
2010
2010
2010
2011
Date
Completed
Continuing
Continuing
Continuing
Continuing
2006
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
2008
2008
2008
2008
Continuing
Continuing
2011
2011
2011
Continuing
Continuing
Continuing
Continuing
Value/
SR
80,000
100,000
70,000
65,000
75,000
170,000
200,000
200,000
250,000
100,000
90,000
75,000
1.2M
1.8M
500,000
500,000
4.8M
3M
2M
1.8M
800,000
200,000
3.6M
1M
3.8M
Client
Marafiq
KAMCO
Mastoura Co.
Nasser Al Hajri
Al Khathlan
Nasser Al Hajri
Guardian Industries
Al Yamama Co
FEMCO
AARTCO
Al Nafjan Cintg Est
Al Hindi Co
SEC-CRB
Rashid Trading Cont. Co.
J & P (O)
J & P (O)
ABV Rock Group
CCC-El Seif J.V.
SBG
Saudi Oger
Al Latifia Co.
J & P (O)
SEC-CRB
SBG
SAMSUNG
74
In Kingdom Experience:
Date Start
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
Date
Completed
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2001
2000
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
Client
Al Babtain Le Blanc
Zuhair Fayez & Partnership
Al Fanar Co.
SSEM
Siemens
Saudi Bin Ladin Group
MOI (Passport Office)
General Machinery Agencies
MASKABA Cont. Co. Ltd.
ASAS Contracting Co.
Hyundai
CADA Construction
ASAS Contracting Co.
Khonaini Inter Co. Ltd.
Green Top Power Projects
SSEM
Bordue Guard Institute
Al Babtain Co. Blanc
Consulting & Design Engg.
Al Fanar Company
Snamprogetti
Al Ojaimi Cont. Ltd.
Haji Abdullah Ali Reza
Rezayat Catering
Daewoo Arabia Ltd.
Salim Al Yami
Al Hoty Bahrain
Arabian Turkish Const. Co.
M.R. Khathlan
Al Mintakh
Saud Consult
S.S.E.M.
Alishar Construction Co.
GENTEC
Andullah Battyour
SBG PCM
Tech. Arms for Construction
75
In Kingdom Experience:
Date Start
2001
2001
2001
2001
2001
2001
2001
2001
2001
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
Date
Completed
2001
2001
2001
2001
2001
2001
2001
2001
2001
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
Client
Rikaz Development Co.
Mohammad Al Swailim Co.
Arabian Turkish Contracting
McConnell Dowell
SABIC
Al Fadl Binal Laden & J&P
Eid Contracting
HICAP
Saudi Company
Abdul Ali Al Ajmi
Al Awami Office
ICCC
Ministry of Health
Carlo Gavazzi Saudi Arabia
Thinet International
Al Eraini Cont. Est.
EP Cement Co.
Zuhair Fayez Partnership
Al Rabiah Cons. Engineers
Saudi Geophysical
Al Suwailem
Zamel & Turbag
ABB
Madaf
United Feed Co.
SALCO
RBC Contracting Est.
Saudi Aramco
Al Akhwain Group
KEMYA
Mohd. Al Ojaimi
G.E. Meelsa SA Ltd.
United Feed Company
SST
Fast Contracting
SSL
76
In Kingdom Experience:
2002
2002
Date
Completed
2002
2002
Value/
SR
10,500
13,000
2002
2002
2002
2002
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
2002
2002
2002
2002
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
11,500
12,000
11,500
200,000
500,000
53,000
20,000
10,500
20,000
12,000
26,000
10,500
10,000
22, 600
22,500
20,700
85,400
19,500
20,200
13,000
10,800
16,100
12,000
22,525
20,200
85,400
19,400
20,200
13,000
10,800
16,100
20,100
Date Start
Client
Al Mana General Hospital
Abdul Rahman Al Naim Cons.
Engrs.
NOFA Farm
Otaishan Consulting Engrs.
Al Ojaimi
Saudico
Madaf
Al Shubaili Group
Khalid Salimi
G.E. Meelsa
Bakri Int. Energy Co. Ltd.
Al Ojaimi Cont. Est.
Otaishan Consulting Eng.
Al Rajhi Development Co.
Al Khalifa Company
Nesma & AlFadl Cont. Co.
Saudi Aramco
Nassir Al Mulhim Office
Saudi Chevron
Saudi Structures Cont. Co.
Arabian Bemco
RTCC
The National Titanium Co.
Mohammad Al-Saadon
Al Mana General Hospital
Saudi Aramco
Nassir Al Mulhim
Saudi Chevron Phillips
Saudi Structures Co.
Arabian Bemco
RTCC
The National Titanium Co.
Mohd. Al Saadon
Mohd. Al Ojaimi
77
In Kingdom Experience:
Date Start
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
Date
Completed
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
Client
Env. Consulting Bureau
Rezayat
Iscosa.
ABB Cont. Co.
Abdullah Khalifa
Innovators Consulting Eng.
Otaishan Consulting Eng.
EDARA
Gazan Agricultural Dev. Co.
Arabian Bemco
Intl. Center Co.
Asas Cont. Co.
ABB Cont. Co.
Arabian BEMCO
Nour Communication
Dubaib & Sulaim Co.
J & P (Overseas) Ltd.
Arabian Bemco
A.B. Group
Middle East Paper Co.
Joannou & Paraskevaides
Saudi Consulting Services
HRH Prince Saud Bin Abdul Mohesn
Dar Al Arkan
Wilbur Smith Associates
Al Toukhi Company
Al Yamamah Company
Zuhair Fayez Partnership
Saudi Arabian Lub.Oil
Swayeh Co
78
In Kingdom Experience:
2005
2005
2005
2005
2005
2005
2005
2005
2005
2005
2005
2005
2006
2006
2006
2006
2006
2006
2006
2006
Date
Completed
2005
2005
2005
2005
2005
2005
2005
2005
2005
2005
2005
2005
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
2006
Date Start
Client
Madaf Co.
J & P Co. Ltd.
Al Mulhim Steel
Wilbur Smith Associates
Sheikh Abdullah Mushabib
PWC Logistics
Bakri Engineering Co.
International Lab. Services
Rawasi Najran Est.
KAMCO
Azmeel Contg. Est.
Haif Co.
International Lab. Services
Al Fanar Co.
Abdul Rahman Al Naim
ARGAS
Project Management & Dev.
Haif Co.
International Lab. Services
Salim Al Yami
Zamel & Turbag Engg.
Najm Al Jazira
Project Management & Dev.
SADAF
Al Qussie International
SAAD Trading & Contracting
Saudi Bin Laden
Mohd. Al Ojaimi
M.S. Al Suwaidi Co.
Ayedh Bin Dajen Co.
Qatar Industrial Lab.
J & P Co. Ltd.
International Lab. Services
Saudi Kaban
Al Toukhi Co.
MEEDCO
79
In Kingdom Experience:
Date Start
2006
2006
2006
2006
2006
2006
2006
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
Date
Completed
2006
2006
2006
2006
2006
2006
2006
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
2007
Client
MADA Co.
Hadi Haider Co.
MEEDCO
SAFRA Co.
Bowon Lee Contracting
Saudi Aramco
Al Ojaimi Contracting Est.
Menard Middle East
Hadi Haider Co. R&H
Al Ruwaite Est.
J & P Hauta & Nuayyem
Samsung Saudi Arabia
SIPCHEM
Ministry of Finance
Cogelex Company
Nesma & Partners
AARTCO
United Environmental Co.
Osos Petrochemical Co.
SABIC
Al Rabiea & Partners Co.
PI-Consult
Modern Design Office
Al Fouzan G. Contracting
Al Shubaily Group
Makateb Offices Real State
CCC
Mohammed Al Mojil Group
80
In Kingdom Experience:
2000
2000
2000
2000
2000
2000
2000
2000
2000
Date
Completed
2005
2001
2001
2001
2006
2001
2000
2000
2001
Value/
SR
200,000
80,000
100,000
100,000
200,000
110,000
200,000
300,000
500,000
Hidada
Jamjoom Wescon
Saudi Archirodon
AGAP Arabia
Juffali Butler
Azzam Trading
Metal Services
Mace S.A. Ltd.
Gama Al Moushegah Arabia
2000
2001
200,000
2000
2000
2001
20013
300,000
500,000
2000
2001
300,000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2000
2002
2002
2001
2002
2002
2002
2002
2002
2001
20013
2001
2002
2002
2002
2002
2002
2002
2002
300,000
300,000
100,000
350,000
800,000
350,000
350,000
200,000
400,000
650,000
100,000
300,000
500,000
300,000
300,000
100,000
200,000
200,000
200,000
300,000
Date Start
Client
81
In Kingdom Experience:
Date Start
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2001
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
Date
Completed
2002
20013
20013
2002
20013
2001
2002
20013
20013
2002
20013
2002
20013
20013
20013
2002
20013
20013
20013
2002
2006
20013
20013
2004
2004
2004
20013
20013
2004
20013
2004
20013
20013
2005
2004
2004
Value/
SR
500,000
2.5 M
2.5 M
300,000
2M
50,000
1M
180,000
35,000
70,000
60,000
100,000
75,000
50,000
100,000
50,000
192,000
150,000
75,000
40,000
300,000
50,000
50,000
300,000
150,000
200,000
25,000
25,000
300,000
40,000
100,000
50,000
350,000
150,000
150,000
700,000
Client
Bin Quraya Est.
Technip S.A. Ltd
CCC
M. S. Al Suwaifi Est.
Mohd. Al Mojil Group
Bechtel
TEKFEN
Hadi Haider
Hamad Al Zamih
TEKFEN
INMA Steel
TEKFEN
ANABEEB
Omar Jazzar
Huta Sete
Saudi Binladin
Saudi Condreco
Ali Al Ghamdi
Misfer Al Khureim
Hadeed/SABIC
Olayan DESCON
Saudi Cranes
Issam Kabani
Al Hammam
Bin Quraya
MEETSCO
GOTZ
Impregilo
FAFCO
PDM
Saudi Binladin Group
NCC
Saudi Binladin Group
AYTB
Technip
Saudi Binladin Group
82
In Kingdom Experience:
Date Start
2002
2002
2002
2002
2002
2002
2002
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
20013
Date
Completed
20013
2004
2004
2004
20013
2004
Continuing
2004
2004
2004
2004
2004
2005
2004
2004
2004
Continuing
Continuing
Continuing
Continuing
2006
2006
2006
2005
20013
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
Value/
SR
250,000
200,000
100,000
50,000
350,000
200,000
200,000
300,000
100,000
50,000
50,000
70,000
100,000
100,000
25,000
70,000
300,000
75,000
500,000
150,000
150,000
250,000
250,000
400,000
100,000
400,000
200,000
250,000
250,000
350,000
150,000
50,000
1M
150,000
50,000
20,000
Client
Simon Carves
Technip
Saudi Binladin
Xenel Group
Technip-Coplexip
Issam Kabbani & Partners
Al-Yusr Townsend & Bottum
Yanbu Steel
Agap Arabia Ltd.
Al Khodari & Sons
Yanbu Steel Co.
Bakri International
Al Suwaidi Indl Services
Abdullah H. Aal-Shuwayer
Nasser S. Al Hajri Corp.
Carlo Gavazzi S.A. Ltd.
A.F.H. Al Dossary Est.
Fallatah & Nadil Co.
MAC
Olayan Descon
Al-Yusr Townsend & Bottum
M.S. Al-Suwaidi Indl Services
M.S. Al-Suwaidi Indl Services
Fouad Abdulla Fouad Co.
Mitsubishi Corporation
MAC
N.S. Al-Hajri Corp.
Yanbu Steel Co. (YSC)
N.S. Al-Hajri Corp.
Yanbu Steel Co (YSC)
Fast Contracting
International Center Co.
M.R. Al Khathlan for Cont.
G.E. Meelsa
Al Fozan Contractng Co.
Bakri Intl & Energy Co.
83
In Kingdom Experience:
Date Start
20013
20013
20013
20013
20013
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2004
2011
2011
2011
2011
2011
2011
2011
2011
2011
2011
2011
Date
Completed
2004
2004
2004
2004
2004
2004
2005
2006
2006
2004
2006
2006
2006
2005
2006
2005
2005
2005
2005
2006
2005
2004
2004
2004
2007
2011
2011
2011
2011
2011
2011
2011
2011
2011
2011
2011
Value/
SR
25,000
110,000
210,000
25,000
25,000
50,000
200,000
200,000
200,000
250,000
150,000
40,000
150,000
1M
30,000
80,000
60,000
200,000
50,000
20,000
500,000
150,000
200,000
50,000
200,000
315,000
100,000
38,000
28,000
212,000
246,000
202,000
100,000
140,000
42,000
150,000
Client
Royal Saudi Naval Forces
Al Zamil Heavy Industries
Hidada, Jeddah
Hidada, Jeddah
New Horizon Ledwood
M. Abdulaziz Al Rajhi Est.
SAFAMI
METITO
Arabian Metals Co. (AMCO)
Fouad Abdulla Fouad Co.
SBG PCM Div.
Truba Arabia Co. Ltd.
GAMA
MAC
METSCCO
BQE
BQE
Al Raisy
Siemens
El Seif Engineering
Tekfen Const & Installation
Olayan Descon
Nasser S. Al Hajri Corp.
M. Abdulaziz Al Rajhi Est.
Arabian Bemco
Arabian Bemco Contracting Co.
A. Hak
Advance Vision
Al Ruwaite Contracting
Bemco Steel Industries
Al Rashid Trading
SICEP
Arabian International Co.
Doosan Heavy Industries
Universal Coil
Sejong
84
In Kingdom Experience:
Date Start
2011
2011
2011
Date
Completed
2011
2011
2011
Client
Al Blagha Holdings Group
Sete Energy
Ali H. Al-Ghamdi
85
In Kingdom Experience:
Date Start
2000
2000
2000
2002
2002
2002
2002
2002
2002
2002
20013
20013
2004
2004
2004
2005
2005
2005
2004
2002
2004
2000
Date
Completed
2001
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Continuing
Analytical Services
Value/
SR
45,000
300,000
300,000
500,000
1M
600,000
1.5M
40,000
30,000
100,000
150,000
2M
100,000
10,000
75,000
15,000
32,000
20,000
2M
100,000
100,000
200,000
Client
SAMGE, Riyadh
SEC-South (Abha)
NCC
S.A. Saipem
SABIC (Hadeed)
SABIC Petrokemya
SABIC
Al Mimish Farm
NALCO
GE BETZ
The Environmental Cons. Bureau
Saudi Aramco
GE Energy Pempower
RAE Training Env. Consultants
Saudi Polyolefins Co.
Carlo Gavazzi Arabia
SAK Engineering Consultants
ETE Technical
Saudi Aramco
SAIPEM
GE-U.S.A.
Ballast Nedam
86
In Kingdom Experience:
Date Start
2009
2009
2009
Date
Completed
Continuing
Continuing
Continuing
Polymer Testing
Value/
SR
196,650
39,000
49,000
Client
KABBANI Cons. Group
BITUMAT Co. Ltd.
GULF SEAL Co. Ltd.
87
In Kingdom Experience:
Date Start
Date
Completed
Value/
SR
2000
2000
124,000
2000
2000
60,000
2004
2004
10,000
2005
2005
12,700
2005
2005
3,600
2005
2005
4,000
2005
2005
10,000
2005
2005
3,600
2006
2006
2006
Client
Tatweer Co.-Riyadh
43,200
Background Noise and Guarantee noise (Near field and Far field) level as per
ISO 1996:87 and ISO 9612.
2006
23,400
2006
2006
43,200
Background Noise and Guarantee noise (Near field and Far field) level as per
ISO 1996:87 and ISO 9612. (TIHAMA Project- Shedgum Gas Plant -Saudi
Aramco Cogen Plant)
2006
2006
4,000
2006
2006
43,200
2006
2006
43,200
Hyundai Site
2006
2006
20,000
Background Noise and Guarantee noise (Near field and Far field) level as per
ISO 1996:87 and ISO 9612. (TIHAMA Project-JUAYAMAH-Saudi Aramco
Cogeneration Plant)
Background Noise and Guarantee noise level (Near field and Far field) as per
ISO 1996:87 and ISO 9612 - Rastanura.
Noise Assessment-Riyadh
88
6.0
Pages
6.1
6.2
90-91
92
89
6.1
Address
Owner
General Manager
Hani Al Hoty
Alberto Banzon
Telephone Number
(013)894-6452/894-5204/894-8020
Facsimile Number
(013)894-3980
admin@al-hoty.com
Al Hoty Company Limited is a 100% Saudi Arabian Company offering a wide variety of services to clients,
including:
1) PWHT Division
i.
Management Consultant
ii.
PWHT Supervisor
2)
3)
Training Services
4)
Recruiting Services
5)
6)
Microcomputer Software
7)
8)
Janitorial Services
9)
10)
Land Surveying
Recent clients with multiple contracts include ARAMCO, where Al Hoty Company Limited continue to
supply professional and technical personnel on a Services Organization basis; and Chiyoda Petrostar,
ISCOSA, and Mohammed Al Mojil Establishment; with operations and maintenance, and construction
support services.
90
Worldwide recruiting facilities are either owned outright by the Company, or are closely controlled,
ensuring the obtaining of personnel with suitable qualification in an efficient and timely manner.
The PWHT division has several Mannings UK machines and experienced crews to undertake large-scale
projects. The division has completed a number of SABIC, SASREF and S. Aramco projects during the last
decade.
91
6.2
Address
Wendell S. Arevalo
Operations Manager
Ramiro Rivera
Telephone Number
(013)864-4150/894-8020
Facsimile Number
(013)894-3980
acsmain@al-hoty.com
Telex Number
870292 AL-HOTY SJ
Al Hoty Calibration Services offers measurement and calibration services that meet the international
standard of quality. Ensuring that requirements are fulfilled in accordance with the needs and expectations of
our customers by reviewing and analyzing the stated requirements prior to measurement or calibration,
establishing appropriate quality controls and procedures that comply with nationally and internationally
recognized methods, providing adequate resources and highly trained personnel, operating within defined
quality management system consistent with Saudi Arabian Standards Organization (SASO) Saudi Standard
No. 17025 and continuously reviewing and improving our system to provide prompt and efficient services.
The company head office is located in Al Khobar regional offices are operated in Riyadh, Jubail and Jeddah,
Saudi Arabia. At all locations the emphasis is on service with extensive stocks, spares and professional sales
and maintenance/repair personnel on hand.
Calibration services are also offered and standard devices calibrations by the National Physical Laboratory in
England are available. This includes standard force-measuring devices, load cells and standard weights for
calibrating laboratory and industrial weighing equipment.
Computerized quotation, stock and order control system are used within Al Hoty Calibration Services and
these optimize order response times and stock replenishment procedures.
92
7.0
Schedule of Services
93
7.0
This section supplements the Al Hoty-Stanger Ltd. brochure, which outlines the main activities of the company.
The range of the more common tests and services available are detailed. These are available from Al HotyStanger Ltd. Laboratories throughout Saudi Arabia and also in UAE.
This section is divided into two parts describing laboratory and field services respectively.
94
7.0
Laboratory
Pages
7.1
96 - 98
7.2
98 - 99
7.3
99 - 102
7.4
Metallurgical
7.5
Bituminous Materials
7.6
1013 - 104
104
104 - 107
Field
7.7
108
7.8
109
7.9
110
8.0
111 114
8.1
115 - 116
8.2
Special Activities
116
95
7.1
Tests to ASTM
101.01
101.02
101.013
101.04
101.05
101.06
101.07
101.08
101.09
101.10
101.11
101.12
101.13
102.
Tests to BS 812
102.01
102.02
102.013
102.04
102.05
102.06
102.07
102.08
102.09
102.10
102.11
102.12
102.13
102.14
102.15
102.16
102.17
102.18
102.19
102.20
102.21
C 136
C 29
C127
C 128
C 87/C 40
C 177
C131/535
C 142
C 851
C 295
C 586
C123
C 342
96
Fresh Concrete
104.01
104.02
104.013
104.04
104.05
104.06
104.07
104.08
Determination of slump.
104.09
105.
105.01
105.02
105.03
105.04
105.05
105.06
105.07
105.08
105.09
105.10
106.
Mortar Tests
106.01
106.02
106.03
106.04
106.05
BS 1881
BS 1881
BS 1881 &
ASTM C 138 104.06
BS 1881 &
ASTM C 137
BS 1881 &
ASTM C 137
BS 1881 &
ASTM C 143
ASTM C 39
BS 1881Part 116
BS 1881 Part 118 &
ASTM C 78/293
BS 1881 &
ASTM C 42
DIN 1048
BS 18811
ASTM C 856
ASTM C 1202
ASTM C 270
ASTM C 109
ASTM C 110
ASTM C 207
ASTM C 144
107.01
107.02
107.03
107.04
107.05
107.06
97
ASTM C 140
ASTM C 140
ASTM C 140
ASTM C 426
108.
108.01
108.02
108.03
108.04
108.05
108.06
Miscellaneous Materials
The concrete and building product sections of our Regional Laboratories are equipped with a variety of test
machines, apparatus and measuring equipment; and whilst not necessarily on a routine basis, tests may be conducted
as required on pipes, timber, engineering fabrics, plastic products, street furniture, sealants, membranes, admixtures,
etc.
7.2
201.01
201.02
201.03
201.04
201.05
201.06
202.
202.01
202.02
202.03
202.04
2013.
2013.01
2013.05
2013.06
2013.07
204.
204.01
204.02
2013.02
2013.03
2013.04
BS 1377
ASTM D 4318
BS 1377
ASTM 854/
BS 1377
ASTM D 422
BS 1377
ASTM D 698
ASTM D 1557
BS 1377
BS 1377
ASTM D 4253/4254
ASTM D 2844
BS or ASTM
BS or ASTM
ASTM D 3080
(G 57 & 1 EEE)
BS or ASTM
BS 1377
BS 1377
98
7.3
205.
205.01
205.02
205.03
205.04
205.05
205.06
205.07
205.08
205.09
205.10
205.11
205.12
205.13
ASTM D 4555
ASTM D 3148
ASTM D 3148
ASTM D 2664
ASTM D 3967
ISRM B / D 4644
IMM [Vol 80]
ASTM D 3080
ASTM C 97
ASTM C 99
ASTM C 170
ASTM C 241
ASTM C 880
Determination of:
301.01
301.02
301.03
301.04
301.05
301.06
301.07
301.08
301.09
302.
ASTM C 185
ASTM C 204
ASTM C 151
ASTM C 109
ASTM C 191
ASTM C 451
ASTM C 186
ASTM C 266
ASTM C 190
Determination of:
302.01
302.02
302.03
302.04
302.05
Specific surface.
Initial and final setting times.
Soundness.
Compressive strength of mortar cubes.
Compressive strength of concrete cubes.
3013.
3013.01
3013.02
3013.03
3013.04
304.
304.01
304.02
304.03
304.04
ASTM C 150
ASTM C 1240
ASTM C 618
ASTM C 989
99
305.
305.01
305.02
305.03
305.04
305.05
305.06
305.07
305.08
305.09
305.10
305.11
305.12
305.13
306.
306.01
306.02
306.03
306.04
306.05
306.06
306.07
306.08
306.09
307.
307.01
307.02
307.03
308.
Refractory Bricks
308.01
308.02
308.03
308.04
308.05
309.
Water Analysis
309.01
309.02
309.03
309.04
309.05
309.06
309.07
309.08
309.09
309.10
309.11
309.12
309.13
Turbidity.
Total Dissolved Solids.
Total Hardness.
Total Alkalinity.
pH.
Free Chlorine.
Boron.
Barium.
Cadmium.
Calcium.
Chromium.
Chloride.
Fluoride.
ASTM C 88
ASTM C 289
ASTM C 227
ASTM C 20
ASTM C 134
ASTM C 133
ASTM C 133
ASTM C 113
100
309.14
309.15
309.16
309.17
309.18
309.19
309.20
309.21
309.22
309.23
309.24
309.25
309.26
309.27
309.28
309.29
309.30
309.31
309.32
309.33
309.34
309.35
309.36
309.37
309.38
309.39
309.40
309.41
309.42
309.43
Sulphite.
Selenium.
Silver.
Sulphate.
Lead.
Mercury.
Cyanide.
Silica.
Total Organic Carbon.
Arsenic.
Manganese.
Magnesium.
Sodium.
Potassium.
Copper.
Iron.
Zinc.
Phenolic Compounds.
Color.
Nitrogen
Nitrogen
Phosphate
Phosphate
Oil and grease.
Total volatiles.
Electrical conductivity.
Nitrate.
Nitrite.
Sodium absorption ratio.
Anionic synthetic detergents.
310.
310.01
(Total Kjeldahl).
(Ammonia).
(Total).
(Acid Extractable).
Water analysis:
Microbiological Analysis of Drinking, Bottled, Waste, RO, STP Water Analysis.
Aerobic Plate Count
Total Coliforms
Escherichia coli
Pseudomonas
Fecal streptococcus
Legionella
Nitrifying bacteria
Sulfate Reducing Bacteria (SRB)
101
Enumeration
Detection / Enumeration
Detection / Enumeration
Detection / Enumeration
Detection / Enumeration
Detection / Enumeration
Enumeration
Enumeration
Enumeration
Enumeration
Detection
Detection
Detection (5 50 ppb)
Environmental Monitoring:
Environmental swabbing for Equipment, Food contact, and non-contact surfaces. Personnel swabbing, and microbiological
air monitoring, for different target bacteria and general bacteria.
7.4
Mechanical Testing
Full machining facilities are available for sample preparation of reinforcing bar/mesh/wire, pre-stressing strand,
anchor bolts, threaded fasteners, plates, pipes, etc.
401.01
401.02
401.03
401.04
401.05
401.06
401.07
401.08
401.09
401.10
401.11
401.12
401.13
401.14
401.15
401.16
102
402.
Tensile.
Nick break.
Impact toughness.
Bend.
Welder performance qualification (tensile, bend, fillet break).
Macro-etch examination.
Micro section examination.
Hydrogen-induced cracking test (Aramco AMSS 16).
Chemical analysis.
4013.
Coatings
4013.01
4013.02
4013.03
4013.04
4013.05
404.
Non-Destructive Examination
404.01
404.02
404.03
404.04
404.05
404.06
404.07
404.08
404.09
404.10
404.11
X-radiography.
Ultrasonic examination.
Surface examination.
Qualitative analysis.
Thickness surveys.
Magnetic Particle Test
Dye-Penetrant Test
Liquid Penetrant Test
Leak Test
Holiday Test
Positive Material Investigation
405.
Metallography
405.1
405.2
405.3
405.6
405.7
Metallography of various carbon steel, alloy steels, stainless steels, Inconel, Inco-alloys.
Failure investigations of metals, boiler, heat exchangers.
Coating thickness of painmels, and adhesive bonding on metal surface by ELCOMETER & ASTM
methods.
Corrosion tests of failed metals as per ASTM A262, G48.
HIC (hydrogen induced cracking) for evaluation of pipeline for qualification of metals and pressure vessel
steel for resistance to HIC as per NACE STD. (TM- 0884-96/013).
Noise measurement by sound level meter.
In situ Replica test as per ASTM E1351
406.
Vendor Inspection
405.4
405.5
The above services are utilized as appropriate in failure investigation, and corrosion examination and analysis.
103
7.5
Bituminous Materials
501.
501.01
501.02
501.03
501.04
501.05
501.06
ASTM D 1664
ASTM D 88
ASTM D 1559/MS 2
ASTM D 2829
ASTM D 1559
ASTM D 92
ASTM D 70
ASTM D 244
ASTM D 2046
D 2027/2028
General Tests
601.01
601.02
601.03
601.04
601.05
601.06
601.07
601.08
601.09
601.10
601.11
601.12
601.13
601.14
Appearance
Ash from petroleum products
Ash, sulphated from lube oils
Asphaltenes-precipitated from n-Heptane
ASTM color of petroleum products
Benzene and toluene in finished motor and
aviation gasoline by gas chromatography
601.15
Burning quality of kerosene
601.16
Calculated BTU from API gravity and mid-boiling point
601.17
Calculated cetane index of distillate fuels
601.18
Carbon residue, Ramsbottom
601.19
Carbon residue, Conradson
601.20 Cetane index number
601.21
CIN in addition to and calculated from API gravity
and distillation
601.22
Cloud point
601.23
Cold filter plugging point of distillate fuels.
601.24 Color of petroleum products (ASTM Color Scale
601.25
601.26
601.27
601.28
104
ASTM D 1093
IP 182
IP 182
ASTM D 3242
ASTM D 1473
MM 518
ASTM D 611
ASTM D 287 &
ASTM D 611
Visual
ASTM D 482
ASTM D 874
IP 143
ASTM D 1500
ASTM D 3606
ASTM D 187
ASTM D 2890
ASTM D 976
ASTM D 524
ASTM D 189
ASTM D 976
ASTM D 976
ASTM D 2500
lP 309
ASTM D 1500
ASTM D 156
ASTM D 2781
ASTM D 130
ASTM D 1275
601.29
601.30
601.31
601.32
601.33
601.34
601.35
601.36
601.37
601.38
601.39
105
IP 227
IP 19
ASTM D 2711
ASTM D 1298
BS 148
IP 21
ASTM D 322
ASTM D 3524
ASTM D 3525
ASTM D 285
ASTM D 86
ASTM D 2887
ASTM D 484
ASTM D 1401
ASTM D 1405
DIN 51-428
Mil-T-5624
Appendix A
ASTM D 92
IP 170
ASTM D 92
ASTM D 93
ASTM D 56
ASTM D 1659
ASTM D 892
ASTM D 2386
ASTM D 3427
ASTM D 2982
ASTM D 287
ASTM D 1298
ASTM D 381
ASTM D 240 &
ASTM D 2382
ASTM D 1405
ASTM D 2890
ASTM D 1018
FS 5327
ASTM D 525
ASTM D 473
ASTM D 893
ASTM D 924
ASTM D 2547
IP 224
ASTM D 1740
ASTM D 1840
Exxon
ASTM D 664
ASTM D 974
602.01
602.02
602.03
602.04
602.05
602.06
602.07
602.08
Iron
Lead
Copper
Chromium
Aluminum
Nickel
Silver
Tin
106
ASTM D 2896
FS 321
ASTM D 1473
ASTM D 2274
SAE
ASTM D 2276
ASTM D 217
ASTM D 3231
ASTM D 97
ASTM D 91
ASTM D 91
ASTM D 323
ASTM D 665
ASTM D 3230
ASTM D 94
ASTM D 473
Shell
ASTM D 1313
ASTM D 1322
20 elements
ASTM D 129
ASTM D 1552
ASTM D 1226
ASTM D 3227
ASTM D 3241
ASTM D 323
ASTM D 2533
ASTM D 445
ASTM D 455
ASTM D 2161
ASTM D 2270
ASTM D 4006
ASTM D 95
ASTM D 1533
ASTM D 4007
ASTM D 1796
ASTM D 2709
ASTM D 3948
UOP-46-641/
Philipps
602.09 Silicon
602.10 Boron
602.11 Sodium
602.12 Phosphorous
602.13 Zinc
602.14 Calcium
602.15 Barium
602.16 Magnesium
602.17 Titanium
602.18 Molybdenum
60219 Cadmium
602.20 Antimony
602.21 Vanadium
602.22 Manganese
(Sil
(B)
(Na)
(P)
(Zn)
(Ca)
(Ba)
(Mg)
(Ti)
(Mo)
(Cd)
(Sb)
(V)
(Mn)
The 602 series, together with selected 601 tests are used in engine preventive maintenance and diagnosis services.
AHS staff will advise on setting up a service and will provide necessary diagnostic interpretation.
6013.
Gas Chromatography
6013.01
6013.02
6013.03
6013.04
6013.05
6013.06
In addition, a whole range of other tests are available using Gas Chromatography. Further details can be obtained
from the Oil Testing Laboratory.
7.7
Concrete
701.01
701.02
701.03
701.04
701.05
701.06
701.07
701.08
701.09
701.10
701.11
702.
702.01
702.02
702.03
702.04
702.05
702.06
107
702.07
702.08
702.09
702.10
702.11
702.12
702.13
702.14
702.15
702.16
7013.
Chemical
7013.01
7013.02
7013.03
7013.04
704.
Metallurgical
704.01
704.02
704.03
704.04
704.05
704.06
Weld radiography.
Ultrasonic surveys.
Thickness surveys.
Coating surveys and surface preparation inspection.
Qualitative materials analysis.
Dye penetrant surveys.
705.
705.01
705.02
705.03
705.04
705.05
705.06
705.07
706.
706.01
706.02
706.03
706.04
706.05
706.06
706.07
108
7.8
The department utilizes the full regional laboratory network of Al Hoty-Stanger Ltd. to carry out soil mechanics and
chemical testing.
The departments activities in the Kingdom have include the provision of date for the design of foundations for a wide
variety of land based structures including residential, community and commercial developments, highways, reservoir,
power lines and water communications towers. We have also operated in coastal and shallow marine conditions.
Resource surveys for suitable fill materials, aggregates for concrete supply and raw materials for cement manufacture
have been successfully completed.
109
The department is concerned with the operation of on-site quality control and quality assurance procedures where
continuous monitoring of constructional materials and procedures is required.
a)
Advice and recommendation at specification stage as to the procedures necessary and the size and extent of
control facility required.
c)
Provision of experienced engineers and technicians to supervise and carry out quality control testing,
monitoring, and assessment of earthwork, cements, and concretes, bituminous and other structural materials.
Our staffs are available to operate on whatever scale is required either as independent laboratories on site or under
seconded to consultants and/or contractors. Facilities provided may range from batch plant monitoring to multidiscipline laboratories with computerized management and quality control system.
110
8.0
Karl Fischer
Viscosity Meter
UV Spectrophotometer
ICP OES
AAS
FTIR
GCMS
TOGA
TOC Analyzer
Centrifuge
Laminar Airflow
Rotor Mixer
Refracto Meter
Turbidity Meter
Bomb Calorimeter
IR Spectrophotometer
Carbon Analyzer
801.
801.01
801.02
801.03
801.04
801.05
801.06
801.07
801.08
801.09
801.10
801.11
801.12
801.13
801.14
801.15
801.16
802.
802.01
802.02
802.03
802.04
802.05
802.06
802.07
802.08
802.09 Nitrate
111
802.10
802.11
802.12
802.13
802.14
802.15
802.16
802.17
802.18
802.19
8013.
803.01
803.02
803.03
803.04
803.05
803.06
803.07
803.08
803.09
804.
804.01
804.02
804.03
804.04
804.05
804.06
804.07
804.08
804.09
804.10
804.11
804.12
804.13
805.
805.01
805.02
805.03
805.04
805.05
805.06
805.07
806.
806.01
806.02
806.03
806.04
806.05
Nitrites
Acidity
Sodium Chloride
Aerobic Colony Count
Total Coliforms
E coli
Staphylococcus areus
Listeria monocytogene
Salmonella Spp
Sulfate Reducing Clostridia
Chemical & Microbiological Analysis of Tomato Paste or Ketchup
Ash
Solid
Salt
Acidity
Trace Metals (Pb, Cr, Cu, Sn)
Insoluble Solid
Aerobic Colony Count
Total Yeast and Mould
Bacillus Cereus
Chemical & Microbiological Analysis of Meat Fish & Shellfish Products
Nitrate, Nitrite
Total Fat
Histamine
Total Volatile Base Nitrogen
Peroxide Value
Acidity
Aerobic Colony Count
Coliforms
Vibro
E.coli 0157:H7
Staphylococcus areus
Listeria monocytogene
Salmonella Spp
Chemical & Microbiological Analysis of Fruit Juice
Total Solids
Concentration
Specified Gravity
Ash
K, P, N
E.coli
Salmonella Spp
Chemical & Microbiological Analysis of Biscuits / Cakes / Confectionary
Moisture
Ash
Fat
Protein
Sugar
112
806.07
806.08
806.09
806.10
807.
807.01
807.02
807.03
807.04
807.05
807.06
807.07
808.
808.01
808.02
808.03
808.04
808.05
809.
809.01
809.02
809.03
809.04
809.05
810.
810.01
810.02
810.03
810.04
810.05
810.06
810.07
810.08
811.
811.01
811.02
811.03
811.04
811.05
811.06
811.07
Energy
Aerobic Colony Count
E.coli
Salmonella Spp
Chemical & Microbiological Analysis of Flour
Moisture
Ash
Oil
Protein
Acidity
Calcium
Fiber
Chemical & Microbiological Analysis of Syrup Treacle Molasses
Water
Ash
Sugar
Trace Metals (As, Pb, Cu)
Sulphur dioxide (SO2)
Chemical & Microbiological Analysis of Jam & Jelly
Soluble Solids
Sorbitol
Trace Metals (As, Pb, Cu)
Ash Content
Acidity
Chemical & Microbiological Analysis of Sugar Testing
Solubility
Moisture
Sulfated Ash
Extaneous water-soluble
Trace Metals (As, Pb, Cu)
Sulphur Dioxide (SO2)
Yeast and Mould
Salmonella Spp
Chemical & Microbiological Analysis of Ready to eat food
Aerobic Colony Count
E.coli 0157:H7
Staphylococcus areus
Listeria monocytogene
Salmonella Spp
Colif
E.coli
113
812.
812.01
812.02
812.03
812.04
812.05
812.06
812.07
813.
813.01
813.02
813.03
813.04
813.05
813.06
813.07
813.08
813.09
813.10
814.
814.01
814.02
814.03
814.04
814.05
814.06
814.07
815.
815.01
815.02
815.03
815.04
815.05
815.06
815.07
815.08
815.09
815.10
815.11
815.12
815.13
815.14
114
8.1
Toys Testing
901.01
901.02
901.03
Flammability Test
Drop Strength Test
Noise Level Test
902.
Plastic Pipes
902.01
902.02
902.03
902.04
902.05
903.
Plastic Films/Sheet
903.01
903.02
903.03
903.04
903.05
903.06
903.07
903.08
903.09
GSM
Thickness
Opacity Test
Tensile Strength
Elongation
Dart Impact Test
Treatment Test
Puncture Strength Test
Bursting Strength
904.
Rubber
904.01
904.02
904.03
904.04
904.05
904.06
904.07
904.08
Hardness
Compression Set
Tensile Strength
Elongation
pH Value
Ash Content
Synthetic Rubber Microbiology Test
ESCR
905.
Paper
905.01
905.02
905.03
905.04
905.05
905.06
905.07
905.08
GSM
Thickness
Brightness
Ash Content
Moisture Content
Tensile Strength
Elongation
Bursting Strength
GS 579
GS 578
ASTM E 1014
ASTM D 1598
ASTM D 882
ASTM D 882
ASTM D 1709
ASTM D 3787
ASTM D 1599
ASTM D 2240
ASTM D 2240
ASTM D 1693
ASTM D 882
ASTM D 882
ASTM D 1599
115
8.2
906.
Polymer
906.01
906.02
906.03
906.04
906.05
906.06
Hardness
Izod Impact Test
Tensile Strength
Elongation
ESCR
Tear Resistance
907.
Cardboard
907.01
907.02
907.03
907.04
GSM
Thickness
Bursting Strength
Puncture Strength Test
908.
Textile
908.01
908.02
908.03
908.04
Thickness
GSM
Hardness
Bursting Strength
ASTM D 2240
ASTM D 2240
ASTM D 256
ASTM D 1599
ASTM D 3787
ASTM D 2240
ASTM D 1599
Special Activities
Structural performance of reinforced concrete and the bond strength of reinforcement affected by Alkali Silica
Reaction (ASR).
Diagnosis of deleterious reactions in concrete including: Alkali Silica Reaction (ASR), Ettringite, and Delayed
Ettringite, Sulphate attack in the form of Thaumasite through microscopical examination of concrete thin sections.
Petro graphical examination for identification of slag (ggbfs), pfa and other cement replacements as well as various
types of fibres, fire damage. Also assessment on freeze/thaw scaling, acid and silage attack on concrete.
Assessment of ASR expansion levels in various concrete structures and prediction of ASR expansion. Development
of research programmes for the construction industry and development of new materials in concrete (Gumix,
Met kaolin, fibers, etc.). Punching shear in flat slabs with the use of shear heads.
Correlation between CBR values and plate bearing test results
Revised:
February 2014
116