Documente Academic
Documente Profesional
Documente Cultură
GUIDE
KIT CONTENTS
RUNNING THE DEMO SOFTWARE FOR SMART HOPPER AND SMART PAYOUT 6
1 KIT CONTENTS
The sample you have received will contain the following:
2. The 8 pin connector on the CN398 cable should be connected to the rear of the
SMART Hopper, the correct port is marked eSSP.
3. The 16 way connector at the opposite end of the CN398 cable should be connected to
the IF17.
4. The separate power cable CN389 should be connected to +24v DC (red) and 0v
(black). This then connects to the rear of the SMART Hopper.
You can also connect combinations of these devices using the cables supplied. Please see the
below images for clarification:
MAIN HEADQUARTERS
AUSTRALIA
support@innovative-technology.com.au
BRAZIL
suporte@bellis-technology.com.br
CHINA
support@innovative-technology.co.uk
GERMANY
supportDE@innovative-technology.eu
ITALY
supportIT@innovative-technology.eu
SPAIN
supportES@innovative-technology.eu
UNITED KINGDOM
support@innovative-technology.co.uk
REST OF THE WORLD
support@innovative-technology.co.uk