Documente Academic
Documente Profesional
Documente Cultură
Home
You Are Here About
Second(s)
Admtek
Agere
Aironet
Atmel
Atheros
Broadcom
Conexant
Inprocomm
Intel
Marvel
Orinoco
Prism 2/3/GT
Ralink
Sis
Realtek
Texas Instrument
Zydas
New Article
Speak Up Here
Get Paid Program
Get Paid
Paid For Search
The easiest way to remove this part is to cover both ends of the
smd component with much solder, so both ends are heated and
it can be removed easily.
Powered by
Now remove some of the varnish (e.g. with a dremel multi tool)
of the board (where no circuit paths are printed) near to the
jack, to get a point where yo can solder a wire to ground of the
board. Solder this wire also to the jack (on the right side of the
board, below the jack).
http://wifi-modification.blogspot.com/2007/04/antenna-modification-for-asus-wl-167g.html (3 of 5) [26/03/2008 23:09:03]
You're almost done, just drill a hole in the plastic case where the
reverse-SMA jack fits throug - done.
source : from Tobias site.
Labels: external antenna modification
posted by Dea Salsabila @ 9:22 PM
0 Comments:
Post a Comment
<<Home
<<BackForward >>
Article Link
Search
Web
Wifi-Modification.blogspot.com