Sunteți pe pagina 1din 4

Federal Register / Vol. 71, No.

29 / Monday, February 13, 2006 / Notices 7519

entries during this review period. from Taiwan. This review covers 16 Scope of the Order
Failure to comply with this requirement manufacturers/exporters. The period of The products covered by the order are
could result in the Secretary’s review (POR) is July 1, 2003, through certain stainless steel sheet and strip in
presumption that reimbursement of June 30, 2004. coils. Stainless steel is an alloy steel
antidumping duties occurred, and in the We provided interested parties with containing, by weight, 1.2 percent or
subsequent assessment of double an opportunity to comment on the less of carbon and 10.5 percent or more
antidumping duties. preliminary results of review. After of chromium, with or without other
This notice also is the only reminder analyzing the comments received, we elements. The subject sheet and strip is
to parties subject to administrative made changes to the margin calculations a flat–rolled product in coils that is
protective order (‘‘APO’’) of their for two respondents, Chia Far Industrial greater than 9.5 mm in width and less
responsibility concerning the return or Factory Co., Ltd. (Chia Far) and Yieh than 4.75 mm in thickness, and that is
destruction of proprietary information United Steel Corporation (YUSCO). annealed or otherwise heat treated and
disclosed under APO in accordance Therefore, the final results of review pickled or otherwise descaled. The
with 19 CFR 351.305. Timely written differ from the preliminary results of subject sheet and strip may also be
notification of the return/destruction of review. The final weighted–average further processed (e.g., cold–rolled,
APO materials or conversion to judicial dumping margins for the reviewed firms polished, aluminized, coated, etc.)
protective order is hereby requested. are listed below in the section entitled provided that it maintains the specific
Failure to comply with the regulations ‘‘Final Results of Review.’’ dimensions of sheet and strip following
and the terms of an APO is a EFFECTIVE DATE: February 13, 2006. such processing.
sanctionable violation. FOR FURTHER INFORMATION CONTACT: The merchandise subject to the order
We are issuing and publishing these Melissa Blackledge or Karine Gziryan, is classified in the Harmonized Tariff
results and notice in accordance with AD/CVD Operations, Office 4, Import Schedule of the United States (HTS) at
sections 751(a)(1) and 777(i)(1) of the Administration, International Trade subheadings: 7219.13.0031,
Act. Administration, U.S. Department of 7219.13.0051, 7219.13.0071,
Dated: February 3, 2006. Commerce, 14th and Constitution 7219.1300.812, 7219.14.0030,
David M. Spooner, Avenue, NW, Washington, DC 20230; 7219.14.0065, 7219.14.0090,
Assistant Secretary for Import telephone: (202) 482–3518 or (202) 482– 7219.32.0005, 7219.32.0020,
Administration. 4081, respectively. 7219.32.0025, 7219.32.0035,
SUPPLEMENTARY INFORMATION:
7219.32.0036, 7219.32.0038,
APPENDIX – Issues in Decision 7219.32.0042, 7219.32.0044,
Memorandum Background 7219.33.0005, 7219.33.0020,
I. Programa de Integracao Social and The following events occurred after 7219.33.0025, 7219.33.0035,
Contribuicao do Financiamento Social the Department published the 7219.33.0036, 7219.33.0038,
Taxes preliminary results of the instant 7219.33.0042, 7219.33.0044,
administrative review in the Federal 7219.34.0005, 7219.34.0020,
II. Per–Unit Cost Calculation Register. See Stainless Steel Sheet and 7219.34.0025, 7219.34.0030,
III. General & Administrative Expense/ Strip in Coils from Taiwan: Preliminary 7219.34.0035, 7219.35.0005,
Ratio Results and Partial Rescission of 7219.35.0015, 7219.35.0030,
Antidumping Duty Administrative 7219.35.0035, 7219.90.0010,
IV. Financial Expenses Review, 70 FR 46137 (August 9, 2005) 7219.90.0020, 7219.90.0025,
V. Depreciation of Deferred Charges for (Preliminary Results). In response to the 7219.90.0060, 7219.90.0080,
Restarting Idled Furnaces Department’s invitation to comment on 7220.12.1000, 7220.12.5000,
VI. Depreciation of Idled Assets 7220.20.1010, 7220.20.1015,
VII. Taxes Included in Constructed the Preliminary Results, the petitioners1
filed case briefs on September 8, 2005, 7220.20.1060, 7220.20.1080,
Value 7220.20.6005, 7220.20.6010,
and September 12, 2005. Chia Far filed
[FR Doc. E6–1987 Filed 2–10–06; 8:45 am] 7220.20.6015, 7220.20.6060,
case brief on September 12, 2005.
BILLING CODE 3510–DS–S
YUSCO filed rebuttal brief on 7220.20.6080, 7220.20.7005,
September 13, 2005, while the 7220.20.7010, 7220.20.7015,
petitioners and Chia Far filed rebuttal 7220.20.7060, 7220.20.7080,
DEPARTMENT OF COMMERCE 7220.20.8000, 7220.20.9030,
brief on September 19, 2005. On
November 16, 2005, the Department 7220.20.9060, 7220.90.0010,
International Trade Administration
extended the time limit for completing 7220.90.0015, 7220.90.0060, and
[A–583–831] the final results of review until February 7220.90.0080. Although the HTS
5, 2006. See Stainless Steel Sheet and subheadings are provided for
Stainless Steel Sheet and Strip in Coils convenience and customs purposes, the
Strip in Coils From Taiwan: Extension
From Taiwan; Final Results and Partial Department’s written description of the
of Time Limit for Final Results of
Rescission of Antidumping Duty merchandise under the order is
Antidumping Duty Administrative
Administrative Review dispositive.
Review, 70 FR 69514 (November 16,
AGENCY: Import Administration, 2005). Excluded from the scope of the order
International Trade Administration, are the following: (1) sheet and strip that
Period of Review is not annealed or otherwise heat treated
Department of Commerce.
SUMMARY: On August 9, 2005, the The POR is July 1, 2003, through June and pickled or otherwise descaled, (2)
Department of Commerce (the 30, 2004. sheet and strip that is cut to length, (3)
rwilkins on PROD1PC63 with NOTICES

Department) published in the Federal plate (i.e., flat–rolled stainless steel


1 The petitioners are Allegheny Ludlum, AK Steel
Register the preliminary results and
Corporation, Butler Armco Independent Union, J&L 2 Due to changes to the HTS numbers in 2001,
partial rescission of the administrative Specialty Steel, Inc., United Steelworks of America, 7219.13.0030, 7219.13.0050, 7219.13.0070, and
review of the antidumping duty order AFL-CIO/CLC, and Zanesville Armco Independent 7219.13.0080 are now 7219.13.0031, 7219.13.0051,
on stainless steel sheet and strip in coils Organization (collectively, ‘‘petitioners’’). 7219.13.0071, and 7219.13.0081, respectively.

VerDate Aug<31>2005 17:38 Feb 10, 2006 Jkt 208001 PO 00000 Frm 00017 Fmt 4703 Sfmt 4703 E:\FR\FM\13FEN1.SGM 13FEN1
7520 Federal Register / Vol. 71, No. 29 / Monday, February 13, 2006 / Notices

products of a thickness of 4.75 mm or produce a metallic substrate with a percent or less. This steel has copper,
more), (4) flat wire (i.e., cold–rolled honeycomb structure for use in niobium, and titanium added to achieve
sections, with a prepared edge, automotive catalytic converters. The aging, and will exhibit yield strengths as
rectangular in shape, of a width of not steel contains, by weight, carbon of no high as 1700 Mpa and ultimate tensile
more than 9.5 mm), and (5) razor blade more than 0.030 percent, silicon of no strengths as high as 1750 Mpa after
steel. Razor blade steel is a flat–rolled more than 1.0 percent, manganese of no aging, with elongation percentages of 3
product of stainless steel, not further more than 1.0 percent, chromium of percent or less in 50 mm. It is generally
worked than cold–rolled (cold– between 19 and 22 percent, aluminum provided in thicknesses between 0.635
reduced), in coils, of a width of not of no less than 5.0 percent, phosphorus and 0.787 mm, and in widths of 25.4
more than 23 mm and a thickness of of no more than 0.045 percent, sulfur of mm. This product is most commonly
0.266 mm or less, containing, by weight, no more than 0.03 percent, lanthanum used in the manufacture of television
12.5 to 14.5 percent chromium, and of less than 0.002 or greater than 0.05 tubes and is currently available under
certified at the time of entry to be used percent, and total rare earth elements of proprietary trade names such as
in the manufacture of razor blades. See more than 0.06 percent, with the ‘‘Durphynox 17.’’5
Chapter 72 of the HTS, ‘‘Additional U.S. balance iron. Finally, three specialty stainless steels
Note’’ 1(d). Permanent magnet iron–chromium- typically used in certain industrial
In response to comments by interested cobalt alloy stainless strip is also blades and surgical and medical
parties, the Department has determined excluded from the scope of the order. instruments are also excluded from the
that certain specialty stainless steel This ductile stainless steel strip scope of the order. These include
products are also excluded from the contains, by weight, 26 to 30 percent stainless steel strip in coils used in the
scope of the order. These excluded chromium, and 7 to 10 percent cobalt, production of textile cutting tools (e.g.,
products are described below. with the remainder of iron, in widths carpet knives).6 This steel is similar to
Flapper valve steel is defined as 228.6 mm or less, and a thickness AISI grade 420 but containing, by
stainless steel strip in coils containing, between 0.127 and 1.270 mm. It exhibits weight, 0.5 to 0.7 percent of
by weight, between 0.37 and 0.43 magnetic remanence between 9,000 and molybdenum. The steel also contains,
percent carbon, between 1.15 and 1.35 12,000 gauss, and a coercivity of by weight, carbon of between 1.0 and
percent molybdenum, and between 0.20 between 50 and 300 oersteds. This 1.1 percent, sulfur of 0.020 percent or
and 0.80 percent manganese. This steel product is most commonly used in less, and includes between 0.20 and
also contains, by weight, phosphorus of electronic sensors and is currently 0.30 percent copper and between 0.20
0.025 percent or less, silicon of between available under proprietary trade names and 0.50 percent cobalt. This steel is
0.20 and 0.50 percent, and sulfur of such as ‘‘Arnokrome III.’’3 sold under proprietary names such as
0.020 percent or less. The product is Certain electrical resistance alloy steel ‘‘GIN4 Mo.’’ The second excluded
manufactured by means of vacuum arc is also excluded from the scope of the stainless steel strip in coils is similar to
remelting, with inclusion controls for order. This product is defined as a non– AISI 420–J2 and contains, by weight,
sulphide of no more than 0.04 percent magnetic stainless steel manufactured to carbon of between 0.62 and 0.70
and for oxide of no more than 0.05 American Society of Testing and percent, silicon of between 0.20 and
percent. Flapper valve steel has a tensile Materials (ASTM) specification B344 0.50 percent, manganese of between
strength of between 210 and 300 ksi, and containing, by weight, 36 percent 0.45 and 0.80 percent, phosphorus of no
yield strength of between 170 and 270 nickel, 18 percent chromium, and 46 more than 0.025 percent and sulfur of
ksi, plus or minus 8 ksi, and a hardness percent iron, and is most notable for its no more than 0.020 percent. This steel
(Hv) of between 460 and 590. Flapper resistance to high temperature has a carbide density on average of 100
valve steel is most commonly used to corrosion. It has a melting point of 1390
produce specialty flapper valves in carbide particles per 100 square
degrees Celsius and displays a creep microns. An example of this product is
compressors. rupture limit of 4 kilograms per square
Also excluded is a product referred to ‘‘GIN5’’ steel. The third specialty steel
millimeter at 1000 degrees Celsius. This has a chemical composition similar to
as suspension foil, a specialty steel steel is most commonly used in the
product used in the manufacture of AISI 420 F, with carbon of between 0.37
production of heating ribbons for circuit and 0.43 percent, molybdenum of
suspension assemblies for computer breakers and industrial furnaces, and in
disk drives. Suspension foil is described between 1.15 and 1.35 percent, but
rheostats for railway locomotives. The lower manganese of between 0.20 and
as 302/304 grade or 202 grade stainless product is currently available under
steel of a thickness between 14 and 127 0.80 percent, phosphorus of no more
proprietary trade names such as ‘‘Gilphy than 0.025 percent, silicon of between
microns, with a thickness tolerance of 36.’’4
plus–or-minus 2.01 microns, and 0.20 and 0.50 percent, and sulfur of no
Certain martensitic precipitation– more than 0.020 percent. This product
surface glossiness of 200 to 700 percent hardenable stainless steel is also
Gs. Suspension foil must be supplied in is supplied with a hardness of more
excluded from the scope of the order. than Hv 500 guaranteed after customer
coil widths of not more than 407 mm, This high–strength, ductile stainless
and with a mass of 225 kg or less. Roll processing, and is supplied as, for
steel product is designated under the example, ‘‘GIN6.’’7
marks may only be visible on one side, Unified Numbering System (UNS) as
with no scratches of measurable depth. S45500–grade steel, and contains, by Partial Rescission of Review
The material must exhibit residual weight, 11 to 13 percent chromium, and
stresses of 2 mm maximum deflection, In the Preliminary Results notice, we
7 to 10 percent nickel. Carbon, stated that we were preliminarily
and flatness of 1.6 mm over 685 mm manganese, silicon and molybdenum
length. rescinding the instant review with
each comprise, by weight, 0.05 percent respect to Ta Chen Stainless Pipe Co.,
Certain stainless steel foil for
rwilkins on PROD1PC63 with NOTICES

or less, with phosphorus and sulfur


automotive catalytic converters is also each comprising, by weight, 0.03 5 ‘‘Durphynox 17’’ is a trademark of Imphy, S.A.
excluded from the scope of the order. 6 This list of uses is illustrative and provided for
This stainless steel strip in coils is a 3 ‘‘Arnokrome III’’ is a trademark of the Arnold descriptive purposes only.
specialty foil with a thickness of Engineering Company. 7 ‘‘GIN4 Mo,’’ ‘‘GIN5’’ and ‘‘GIN6’’ are the

between 20 and 110 microns used to 4 ‘‘Gilphy 36’’ is a trademark of Imphy, S.A. proprietary grades of Hitachi Metals America, Ltd.

VerDate Aug<31>2005 18:02 Feb 10, 2006 Jkt 208001 PO 00000 Frm 00018 Fmt 4703 Sfmt 4703 E:\FR\FM\13FEN1.SGM 13FEN1
Federal Register / Vol. 71, No. 29 / Monday, February 13, 2006 / Notices 7521

Ltd. (Ta Chen), Yieh Mau Corp. (Yieh total adverse facts available (AFA) to the possible, the Department calculated
Mau), Chain Chon Industrial Co., Ltd. following companies because they failed importer–specific assessment rates for
(Chain Chon), Tung Mung Development to respond to the Department’s merchandise subject to this review.
Co. Ltd. (Tung Mung), Tang Eng Iron questionnaire: PFP Taiwan Co., Ltd., Where the importer–specific assessment
Works Company, Ltd. (Tang Eng), Yieh Yieh Trading Corporation, Goang Jau rate is above de minimis, we will
Loong Enterprise Company, Ltd. (Yieh Shing Enterprise Co., Ltd., and Chien instruct CBP to assess the importer–
Loong), and China Steel Corporation Shing Stainless Steel Company Ltd. specific rate uniformly on the entered
(China Steel), because record evidence That margin, 21.10 percent, is the customs value of all entries of subject
supported their claims that they made highest appropriate dumping margin merchandise made by the importer
no shipments of subject merchandise from this or any prior segment of the during the POR. Since YUSCO did not
(for Tung Mung, no U.S. sales through instant proceeding. No parties report the entered value of its sales, we
Ta Chen) during the POR. The record commented on the Department’s calculated per–unit assessment rates for
evidence relied upon by the Department decision to apply total AFA to these its merchandise by aggregating the
included U.S. Customs and Border companies. For the reasons noted in the dumping margins calculated for all U.S.
Protection (CBP) data and customs entry Preliminary Results notice, we have sales to each importer and dividing this
documents which the Department continued to assign the above– amount by the total quantity of those
placed on the record. Parties did not mentioned companies an AFA rate of sales. To determine whether the per–
comment on this evidence. Because the 21.10 percent. unit duty assessment rates were de
record evidence does not call into minimis (i.e., less than 0.50 percent ad
question the parties’ no shipments Changes Since the Preliminary Results
valorem), in accordance with the
claims, we are rescinding this Based on our analysis of the requirement set forth in 19 C.F.R.
administrative review with respect to Ta comments received, we have made § 351.106(c)(2), we calculated importer–
Chen, Yieh Mau, Chain Chon, Tung certain changes in calculating the specific ad valorem ratios based on the
Mung, Tang Eng, Yieh Loong, and China dumping margins for two respondents, export prices. For the respondents
Steel. See Comment 21 of the Chia Far and YUSCO. For additional receiving dumping margins based upon
accompanying Issues and Decision information, see Analysis Memorandum AFA, the Department will instruct CBP
Memorandum. We have already for Chia Far Industrial Factory Co., Ltd. to liquidate entries according to the
rescinded this review with respect to for the Final Results of the AFA ad valorem rate. The Department
Emerdex Stainless Flat–Rolled Products, Administrative Review of the will issue appropriate assessment
Inc., Emerdex Stainless Steel, Inc., and Antidumping Duty Order on Stainless instructions directly to CBP within 15
the Emerdex Group. See Preliminary Steel Sheet and Strip in Coils from days of publication of the final results
Results, 70 FR 46137, 46140 and Taiwan covering the period July 1, 2003, of review.
Comment 22 of the accompanying through June 30, 2004, dated February
Issues and Decision Memorandum. 3, 2006, and the Analysis Memorandum Cash Deposit Requirements
Analysis of Comments Received for Yieh United Steel Company Ltd. for The following deposit requirements
the Final Results of the Administrative will be effective upon publication of
All issues raised in the parties’ case Review of the Antidumping Duty Order
and rebuttal briefs commenting on this this notice of final results of
on Stainless Steel Sheet and Strip in administrative review for all shipments
administrative review are addressed in Coils from Taiwan covering the period
the Issues and Decision Memorandum of stainless steel sheet and strip in coils
July 1, 2003, through June 30, 2004, from Taiwan entered, or withdrawn
from Stephen J. Claeys, Deputy
dated February 3 2006. from warehouse, for consumption on or
Assistant Secretary for Import
Administration, to David M. Spooner, Final Results of Review after the date of publication, as provided
Assistant Secretary for Import by section 751(a)(1) of the Act: (1) the
We determine that the following cash deposit rate for each of the
Administration, dated February 3, 2006, weighted–average percentage margins
which is hereby adopted by this notice. reviewed companies will be the rate
exist for the period July 1, 2003, through listed for the company in the ‘‘Final
A list of the issues that parties have June 30, 2004:
raised and to which we have responded, Results of Review’’ section above
all of which are in the Issues and (except if the rate for a particular
Weighted–
Decision Memorandum, is attached to Average company is de minimis, i.e., less than
this notice as an Appendix. Parties can Manufacturer/Exporter/Reseller Margin 0.5 percent, no cash deposit will be
find a complete discussion of all issues (percent- required for that company); (2) for
age) previously reviewed or investigated
raised in this review, and the
corresponding recommendations, in the Yieh United Steel Corporation
companies not listed above, the cash
public Issues and Decision (YUSCO) ................................. 0.00 deposit rate will continue to be the
Memorandum that is on file in the Chia Far Industrial Factory Co., company–specific rate published for the
Central Records Unit, Room B–099 of Ltd. (Chia Far) ......................... 1.36 most recent period; (3) if the exporter is
the main Department building. In Goang Jau Shing Enterprise not a firm covered in this review, a prior
addition, a complete version of the Co., Ltd. .................................. 21.10 review, or the less–than-fair–value
Issues and Decision Memorandum can PFP Taiwan Co., Ltd. ................. 21.10 investigation, but the manufacturer is,
Yieh Trading Corporation ........... 21.10 the cash deposit rate will be the rate
be accessed directly on the Web at Chien Shing Stainless Steel
http://ia.ita.doc.gov/frn/index.html. The established for the most recent period
Company Ltd. .......................... 21.10
paper copy and electronic version of the for the manufacturer of the
Issues and Decision Memorandum are merchandise; and (4) if neither the
rwilkins on PROD1PC63 with NOTICES

Assessment exporter nor the manufacturer is a firm


identical in content.
The Department has determined, and covered in these or any previous
Use of Facts Available CBP shall assess, antidumping duties on reviews conducted by the Department,
In the preliminary results of review, all appropriate entries. In accordance the cash deposit rate will be the ‘‘all
we assigned a dumping margin based on with 19 C.F.R. § 351.212(b)(1), where others’’ rate, which is 12.61 percent.

VerDate Aug<31>2005 17:38 Feb 10, 2006 Jkt 208001 PO 00000 Frm 00019 Fmt 4703 Sfmt 4703 E:\FR\FM\13FEN1.SGM 13FEN1
7522 Federal Register / Vol. 71, No. 29 / Monday, February 13, 2006 / Notices

These deposit requirements shall Comment 8: Reimbursement of EFFECTIVE DATE: February 13, 2006.
remain in effect until publication of the Dumping Duties
FOR FURTHER INFORMATION CONTACT:
final results of the next administrative Comment 9: Affiliation with Lucky
Medsup, Inc. Rebecca Trainor or Kate Johnson, Office
review.
Comment 10: Identifying the Producer of AD/CVD Operations, Office 2, Import
Reimbursement of Duties Administration, International Trade
B. Issues with Respect to YUSCO Administration, U.S. Department of
This notice also serves as a final
reminder to importers of their Comment 11: Unreported Affiliates Commerce, 14th Street and Constitution
responsibility under section Comment 12: Unreliable Financial Avenue, NW., Washington, DC 20230,
351.402(f)(2) of the Department’s Statements telephone: (202) 482–4007 or (202) 482–
regulations to file a certificate regarding 4929, respectively.
the reimbursement of antidumping Comment 13: Misclassified Home
Market Sales SCOPE OF THE ORDER:
duties prior to liquidation of the
Comment 14: Use of Total Adverse Facts
relevant entries during this review For purposes of this order, the
Available
period. Failure to comply with this products covered are certain stainless
Comment 15: U.S. Direct Selling
requirement could result in the steel sheet and strip in coils. Stainless
Expenses
Secretary’s presumption that steel is an alloy steel containing, by
reimbursement of the antidumping Comment 16: Home Market Rebates weight, 1.2 percent or less of carbon and
duties occurred and the subsequent Comment 17: Under–Reported 10.5 percent or more of chromium, with
assessment of double antidumping Production Costs or without other elements. The subject
duties. Comment 18: General and sheet and strip is a flat–rolled product
Administrative (G&A) Expenses in coils that is greater than 9.5 mm in
Administrative Protective Orders
Comment 19: Yieh Mau’s Packing width and less than 4.75 mm in
This notice also serves as a reminder Expenses thickness, and that is annealed or
to parties subject to administrative otherwise heat treated and pickled or
protective orders (APOs) of their Comment 20: Commercial Quantities otherwise descaled. The subject sheet
responsibility concerning the return or and strip may also be further processed
C. Issues with Respect to Other
destruction of proprietary information (e.g., cold–rolled, polished, aluminized,
Respondents
disclosed under APO in accordance coated, etc.) provided that it maintains
with section 351.305 of the Comment 21: Investigating No– the specific dimensions of sheet and
Department’s regulations, which Shipments Claims strip following such processing.
continues to govern business Comment 22: Reviewing the Emerdex
Companies and Their Affiliates The merchandise subject to this order
proprietary information in this segment is currently classifiable in the
of the proceeding. Timely written [FR Doc. E6–1982 Filed 2–10–06; 8:45 am]
Harmonized Tariff Schedule of the
notification of the return/destruction of BILLING CODE 3510–DS–S
United States (HTS) at subheadings:
APO materials or conversion to judicial 7219.13.00.31, 7219.13.00.51,
protective order is hereby requested. 7219.13.00.71, 7219.13.00.81,
Failure to comply with the regulations DEPARTMENT OF COMMERCE
7219.14.00.30, 7219.14.00.65,
and terms of an APO is a violation that 7219.14.00.90, 7219.32.00.05,
is subject to sanction. International Trade Administration
7219.32.00.20, 7219.32.00.25,
We are issuing and publishing this [A–588–845] 7219.32.00.35, 7219.32.00.36,
results and notice in accordance with 7219.32.00.38, 7219.32.00.42,
sections 751(a)(1) and 771(i) of the Act. Stainless Steel Sheet and Strip in Coils
7219.32.00.44, 7219.33.00.05,
from Japan: Preliminary Rescission of
Dated: February 3, 2006. 7219.33.00.20, 7219.33.00.25,
Antidumping Duty Administrative
David M. Spooner, 7219.33.00.35, 7219.33.00.36,
Review
Assistant Secretary for Import 7219.33.00.38, 7219.33.00.42,
Administration. AGENCY: AGENCY: Import 7219.33.00.44, 7219.34.00.05,
Administration, International Trade 7219.34.00.20, 7219.34.00.25,
Appendix I—Issues in the Issues and
Administration, Department of 7219.34.00.30, 7219.34.00.35,
Decision Memorandum
Commerce. 7219.35.00.05, 7219.35.00.15,
List of Issues Discussed SUMMARY: On August 29, 2005, the 7219.35.00.30, 7219.35.00.35,
Department of Commerce (the 7219.90.00.10, 7219.90.00.20,
A. Issues with Respect to Chia Far
Department) published in the Federal 7219.90.00.25, 7219.90.00.60,
Comment 1: Home Market Discounts Register a notice announcing the 7219.90.00.80, 7220.12.10.00,
Comment 2: Home Market Credit initiation of an administrative review of 7220.12.50.00, 7220.20.10.10,
Expenses the antidumping duty order on stainless 7220.20.10.15, 7220.20.10.60,
steel sheet and strip in coils (SSSSC) 7220.20.10.80, 7220.20.60.05,
Comment 3: Export Sales Classified as from Japan. See Initiation of 7220.20.60.10, 7220.20.60.15,
Home Market Sales Antidumping and Countervailing Duty 7220.20.60.60, 7220.20.60.80,
Comment 4: U.S. Date of Sale Administrative Reviews and Requests 7220.20.70.05, 7220.20.70.10,
Comment 5: Home Market Warranty for Revocation in Part, 70 FR 51009 7220.20.70.15, 7220.20.70.60,
Expenses (Initiation Notice). The period of review 7220.20.70.80, 7220.20.80.00,
(POR) is July 1, 2004 to June 30, 2005. 7220.20.90.30, 7220.20.90.60,
rwilkins on PROD1PC63 with NOTICES

Comment 6: Home Market Inventory We are preliminarily rescinding this 7220.90.00.10, 7220.90.00.15,
Carrying Costs review because there were no entries of 7220.90.00.60, and 7220.90.00.80.
Comment 7: U.S. Indirect Selling SSSSC for consumption in the United Although the HTS subheadings are
Expenses States during the POR that are subject to provided for convenience and customs
review. purposes, the Department’s written

VerDate Aug<31>2005 17:38 Feb 10, 2006 Jkt 208001 PO 00000 Frm 00020 Fmt 4703 Sfmt 4703 E:\FR\FM\13FEN1.SGM 13FEN1

S-ar putea să vă placă și