Documente Academic
Documente Profesional
Documente Cultură
Type of product
:
:
Telephone
Fax
E-mail address
Emergency telephone number
:
:
:
:
2. HAZARDS IDENTIFICATION
GHS-Classification
Not classified
GHS Label elements, including precautionary statements
No labelling
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance name:
Concentration
Polyethersulfone
>= 99 %
CAS-No.: 25608-63-3
1/7
If inhaled
Flush eyes with running water for several minutes, while keeping the eyelids wide open.
Cool skin rapidly with cold water after contact with hot polymer.
None.
5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
powder
Foam
Water
Water spray
None.
Specific hazards arising from the chemical
Combustible material
In a fire, the polymer melts, producing droplets which may propagate fire.
Once started, a fire will tend to self extinguish (see section 9).
2/7
Use only equipment and materials which are compatible with the product.
Keep away from open flames, hot surfaces and sources of ignition.
Do not smoke.
Specific use(s)
Provide local ventilation appropriate to the product decomposition risk (see section 10).
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
3/7
Appearance
pellets
Colour
amber, transparent
Odour
odourless
Important health safety and environmental information
pH
not applicable
pKa
No data
not applicable
Flash point
not applicable
Evaporation rate
No data
No data
Flammability
Explosive properties
no data available
no data available
Vapour pressure
not applicable
Vapour density
No data
Density
No data
Relative density
no data available
Bulk density
No data
Solubility(ies)
negligible, Water
Solubility/qualitative
No data
not applicable
Auto-ignition temperature
No data
Decomposition temperature
Viscosity
No data
Oxidizing properties
No data
Other information
Remarks
4/7
No data
Hazardous Polymerisation/Polymerization: no
Possibility of hazardous reactions
Polymeric resins
Hazardous decomposition products
Carbon monoxide, Sulphur oxides, Hydrocarbons, The release of other hazardous decomposition products is
possible.
no data available
Acute inhalation toxicity
no data available
Acute dermal toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available,
Sensitisation
no data available
Mutagenicity
no data available
Carcinogenicity
no data available
Toxicity for reproduction
no data available
Repeated dose toxicity
5/7
no data available
Other information
The product is biologically inert., Product dust may be irritating to eyes, skin and respiratory system., Description
of possible hazardous to health effects is based on experience and/or toxicological characteristics of several
components.
no data available
Persistence and degradability
Abiotic degradation
no data available
Bioaccumulative potential
no data available
Other adverse effects
The product is biologically inert.
Ingestion of solids may cause harm to wildlife due to intestinal mechanical blockage or starvation from false
feeling of satiation.
13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Contaminated packaging
Empty containers.
Dispose of as unused product.
Sea (IMO/IMDG)
not regulated
Air (ICAO/IATA)
not regulated
European Road/Rail (ADR/RID)
not regulated
Inland waterway transport
not regulated
6/7
Status
Listed on inventory
In compliance with inventory
Listed on inventory
Listed on inventory
Listed on inventory
Listed on inventory
Listed on inventory
Listed on inventory
Update
The information given corresponds to the current state of our knowledge and experience of the product, and is not
exhaustive. This applies to product which conforms to the specification, unless otherwise stated. In this case of
combinations and mixtures one must make sure that no new dangers can arise. In any case, the user is not exempt from
observing all legal, administrative and regulatory procedures relating to the product, personal hygiene, and protection of
human welfare and the environment.
Print Date: 08.12.2014
7/7