Documente Academic
Documente Profesional
Documente Cultură
JULY, 2015
EC 97911-078
FEATURES
Features
Optional Features
Steel reinforcing available
Accepts GLASSventTM UT for curtain wall with captured system type
Profit$MakerTM Plus die sets available
Product Applications
Suitable for new construction or remodel
Ideal for mid-rise and high-rise applications
Kawneer Company, Inc., 2015
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
kawneer.com
ADMD230
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
BLANK PAGE
ADMD230
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
JULY, 2015
EC 97911-078
JULY, 2015
EC 97911-078
INDEX
PICTORIAL VIEWS............................................................................... 4, 5
TYPICAL DETAILS (CAPTURED SYSTEM)............................................6
TYPICAL DETAILS (4-SIDE SSG SYSTEM)............................................7
TYPICAL DETAILS (VERTICAL SSG SYSTEM).....................................8
CORNER DETAILS............................................................................. 9, 10
GLASSventTM UT WINDOWS for CURTAIN WALL ...............................11
ANCHORING..........................................................................................12
WIND LOAD CHARTS.......................................................................13-16
DEADLOAD CHARTS............................................................................17
THERMAL CHARTS..........................................................................18-24
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED
ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT
CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE,
OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference.
Numbers in parentheses (
) are millimeters unless otherwise noted.
The following metric (SI) units are found in these details:
m meter
cm centimeter
mm millimeter
s second
Pa pascal
MPa megapascal
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Architects Most extrusions illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to
afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to
expand design flexibility. Please contact your Kawneer representative for further assistance.
Kawneer reserves the right to change configurations without prior notice when deemed necessary
for product improvement.
kawneer.com
ADMD230
EXTERIOR
PICTORIAL VIEW
INTERIOR
ADMD230
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TYPICAL UNIT
(CAPTURED SYSTEM)
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
JULY, 2015
EC 97911-078
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2015
kawneer.com
EC 97911-078
PICTORIAL VIEW
EXTERIOR
ADMD230
5
1
6
7
7 1/2"
(190.5)
ADMD230
TYPICAL ELEVATION
(CAPTURED SYSTEM)
6A
OPTIONAL STEEL
REINFORCING
AS REQUIRED
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2 1/2"
(63.5)
6
JULY, 2015
EC 97911-078
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
kawneer.com
5
2 1/2"
(63.5)
JULY, 2015
EC 97911-078
TYPICAL DETAILS (4-SIDE SSG SYSTEM)
2
6 1/2"
(165.1)
6
7
6A
OPTIONAL STEEL
REINFORCING
AS REQUIRED
ADMD230
TYPICAL ELEVATION
(4-SIDE SSG SYSTEM)
5
1
6
6
6
7
7 1/2"
(190.5)
ADMD230
TYPICAL ELEVATION
(VERTICAL SSG SYSTEM)
6A
OPTIONAL STEEL
REINFORCING
AS REQUIRED
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2 1/2"
(63.5)
8
JULY, 2015
EC 97911-078
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2015
kawneer.com
EC 97911-078
CORNER DETAILS (CAPTURED SYSTEM)
90 OUTSIDE CORNER
90 INSIDE CORNER
ADMD230
ADMD230
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
10
JULY, 2015
EC 97911-078
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2015
kawneer.com
EC 97911-078
GLASSventTM UT WINDOWS for CURTAIN WALL
HEAD
SILL
JAMB
ADMD230
11
2-1/8"
(54)
2-1/8"
(54)
A
A
2" Nominal
5-1/4" (133.4)
8" (203.2)
6" (152)
9/16"
(14)
9/16"
(14)
ANCHOR AT JAMB
ADMD230
2-7/16"
(62)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
3/4"
(19)
ANCHORING
1" (25.4)
1" (25.4)
ANCHOR AT MULLION
kawneer.com
2-7/16"
(62)
1" Building
Tolerance
1-5/16"
(33)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
9/16"
(14)
2-3/4"
(70)
2-3/4"
(70)
12
JULY, 2015
EC 97911-078
6" (152)
9/16"
(14)
JULY, 2015
EC 97911-078
13
Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4"
above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress
and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa.). Charted
curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load
utilized in allowable stress design. To convert ultimate wind loads to nominal loads, multiply ultimate wind loads by a
factor of 0.6 per ASCE/SEI 7. A 4/3 increase in allowable stress has not been used to develop these curves. For special
situations not covered by these curves, contact your Kawneer representative for additional information.
DEADLOAD CHARTS
Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an
intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1/4" (6.4)
thick glass supported on two setting blocks placed at the loading points shown.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
kawneer.com
ADMD230
14
JULY, 2015
EC 97911-078
When mullion is used in a SSG application, curves become straight due to structural silicone limits, represented by
dashed lines on chart. *Charts are for typical spans, not beginning or ending spans. C/L of stack horizontal to be at
noted stool height above C/L of anchor.
1.5
24
23
23
7.0
22
5.5
18
17
5.0
16
15
4.5
14
C
13
4.0
12
10
427001
5
15
4.5
14
4.0
13
3.5
3.0
2.5
2
*MULTI-SPAN
30" SPLICE LOCATION
*MULTI-SPAN
36" SPLICE LOCATION
1.0
1.5
1.0
24
1.5
24
23
6.5
5.5
17
16
5.0
15
4.5
14
4.0
13
12
10
6.0
19
5.5
18
D
17
5.0
16
15
4.5
14
4.0
13
12
3.5
11
20
6.0
19
6.5
21
3.5
11
10
3.0
18
7.0
22
21
20
23
7.0
22
5.0
16
427002
2.5
4
17
10
9
3
5.5
11
3.0
18
12
3.5
11
6.0
19
19
20
6.0
6.5
21
20
7.0
22
6.5
21
1.5
24
3.0
9
2.5
2
2.5
2
ADMD230
kawneer.com
*MULTI-SPAN
24" SPLICE LOCATION
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SINGLE SPAN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2015
EC 97911-078
15
When mullion is used in a SSG application, curves become straight due to structural silicone limits, represented by
dashed lines on chart. *Charts are for typical spans, not beginning or ending spans. C/L of stack horizontal to be at
noted stool height above C/L of anchor.
SINGLE SPAN
with 1/2" x 3-1/2" Steel Bar
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
1.5
24
23
1.0
5.5
B
5.0
16
C
15
4.5
14
13
4.0
12
(Aluminum)
I = 9.424 (392.25 x 104)
S = 3.208 (52.57 x 103)
(Steel)
I = 1.786 (74.34 x 104)
S = 1.021 (16.73 x 103)
2.5
3
1.5
1.0
A
23
7.0
5.0
16
15
4.5
14
4.0
13
10
6.0
19
5.5
18
D
17
5.0
16
15
4.5
14
4.0
13
12
3.5
11
20
5.5
E
6.5
21
6.0
12
3.5
11
10
3.0
3.0
9
2.5
2
2.5
2
kawneer.com
3.0
22
17
3.5
7.0
20
18
4.0
13
24
19
4.5
14
6.5
21
15
22
1.5
23
5.0
16
1.0
17
427002
2.5
4
5.5
10
427001
3
18
11
3.0
6.0
19
12
3.5
11
20
ADMD230
17
18
6.0
19
6.5
21
20
7.0
22
6.5
21
1.5
24
23
7.0
10
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
22
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
16
JULY, 2015
EC 97911-078
When mullion is used in a SSG application, curves become straight due to structural silicone limits, represented by
dashed lines on chart. *Charts are for typical spans, not beginning or ending spans. C/L of stack horizontal to be at
noted stool height above C/L of anchor.
1.0
1.5
24
23
17
5.5
16
5.0
15
4.5
14
4.0
13
12
10
427001
4
1.5
(Steel)
I = 3.572 (148.67 x 104)
S = 2.041 (33.44 x 103)
3.0
2.5
1.5
A
23
7.0
22
6.5
5.0
16
15
4.5
14
4.0
13
12
5.5
E
10
6.0
19
5.5
18
D
17
5.0
16
15
4.5
14
4.0
13
12
3.5
11
20
6.0
19
6.5
21
17
3.5
20
(Aluminum)
I = 9.424 (392.25 x 104)
S = 3.208 (52.57 x 103)
7.0
18
4.0
13
21
4.5
14
24
23
22
15
5.0
16
24
17
427002
2.5
1.0
5.5
18
10
9
3
6.0
19
11
3.0
20
12
3.5
11
6.5
3.5
11
10
3.0
18
6.0
19
20
21
6.5
21
7.0
22
22
23
7.0
1.5
3.0
9
2
2.5
2.5
ADMD230
kawneer.com
A = 20 PSF (960)
B = 30 PSF (1440)
C = 40 PSF (1920)
D = 50 PSF (2400)
E = 60 PSF (2880)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SINGLE SPAN
with (2) 1/2" x 3-1/2" Steel Bars
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-078
kawneer.com
0
1
2
3
4
5
SPAN IN METERS
1.0
2.0
19
6.0
17
16
13
14
4.0
12
10
11
3.0
7
B
6
2.0
6
7
20
1.0
19
18
427013
5.0
15
I = 1.967 (81.87 x 104)
S = 1.515 (24.83 x 103)
17
A
1.0
SPAN IN FEET
8
ADMD230
16
427019
13
14
12
4.0
10
11
3.0
8
6
2.0
5
4
2
1
0
1
2
SPAN IN FEET
3
4
5
6
7
8
1.0
427013
20
JULY, 2015
DEADLOAD CHARTS
SPAN IN METERS
427019
2.0
6.0
18
5.0
15
JULY, 2015
THERMAL CHARTS
EC 97911-078
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2'-0"
D.L.O.
9'-6"
Frame Height
7'-0"
D.L.O.
5'-0"
D.L.O.
Percent of Glass
0.70
E n
PL ig
M es
A rD
EX Fo
ot
(N
0.65
COG
U-Factor
0.55
0.50
0.49
0.45
0.40
0.35
0.30
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.60
0.25
70
75
80
85
90
91%
0.20
ADMD230
kawneer.com
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.75
95
18
JULY, 2015
EC 97911-078
THERMAL CHARTS
Captured System
System U-Factor vs Percent of Glass Area
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.70
0.65
0.60
0.55
COG
U-Factor
0.46
0.44
0.45
0.42
0.40
0.40
0.38
0.36
0.34
0.35
0.30
0.28
0.30
0.26
0.24
0.22
0.25
0.20
0.18
0.16
0.20
0.14
0.12
Kawneer Company, Inc., 2015
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.32
0.15
0.10
95
90
85
80
75
70
0.10
kawneer.com
ADMD230
0.50
0.48
19
JULY, 2015
THERMAL CHARTS
EC 97911-078
Captured System
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
0.75
0.70
0.70
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.65
0.65
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
95
90
85
80
75
70
System SHGC
0.60
0.60
0.00
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Captured System
Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
95
90
85
80
75
70
0.00
ADMD230
kawneer.com
System VT
20
JULY, 2015
EC 97911-078
0.48
0.53
0.46
0.51
0.44
0.50
0.42
0.48
0.40
0.46
0.38
0.45
0.36
0.43
0.34
0.41
0.32
0.40
0.30
0.38
0.28
0.36
0.26
0.34
0.24
0.33
0.22
0.31
0.20
0.29
0.18
0.27
0.16
0.25
0.14
0.23
0.12
0.22
0.10
0.20
Captured System
1" GLAZING
SHGC Matrix 2
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
kawneer.com
21
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.67
0.75
0.67
0.70
0.63
0.70
0.62
0.65
0.58
0.65
0.58
0.60
0.54
0.60
0.53
0.55
0.50
0.55
0.49
0.50
0.45
0.50
0.44
0.45
0.41
0.45
0.40
0.40
0.36
0.40
0.36
0.35
0.32
0.35
0.31
0.30
0.27
0.30
0.27
0.25
0.23
0.25
0.22
0.20
0.18
0.20
0.18
0.15
0.14
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.05
0.05
0.04
ADMD230
JULY, 2015
EC 97911-078
THERMAL CHARTS
SSG SYSTEM
System U-Factor vs Percent of Glass Area
0.65
0.60
0.55
COG
U-Factor
0.50
0.46
0.44
0.45
0.42
0.40
0.38
0.40
0.36
0.34
0.32
0.35
0.30
0.28
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.48
0.30
0.26
0.24
0.22
0.25
0.20
0.18
0.16
0.20
0.14
0.12
0.15
0.10
95
90
85
80
75
70
0.10
ADMD230
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.70
22
JULY, 2015
EC 97911-078
23
THERMAL CHARTS
SSG SYSTEM
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
0.75
0.75
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
95
90
85
80
75
70
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.70
0.00
SSG SYSTEM
COG
VT
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
95
90
85
80
kawneer.com
ADMD230
75
70
0.00
System VT
0.50
0.50
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
JULY, 2015
EC 97911-078
0.54
0.46
0.53
0.44
0.51
0.42
0.49
0.40
0.48
0.38
0.46
0.36
0.44
0.34
0.42
0.32
0.41
0.30
0.39
0.28
0.37
0.26
0.36
0.24
0.34
0.22
0.32
0.20
0.30
0.18
0.28
0.16
0.26
0.14
0.24
0.12
0.22
0.10
0.21
SSG System
1" GLAZING
SHGC Matrix 2
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.69
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.60
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.51
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.42
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.33
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.19
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.06
0.05
0.04
ADMD230
kawneer.com
Overall U-Factor 4
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
24