Documente Academic
Documente Profesional
Documente Cultură
Draft A
Date
2014-01-20
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Contents
Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1
2 Overview.........................................................................................................................................2
2.1 Definition........................................................................................................................................................................3
2.2 Benefits...........................................................................................................................................................................3
3 Technical Description...................................................................................................................4
4 Related Features.............................................................................................................................6
5 Network Impact.............................................................................................................................7
6 Engineering Guidelines...............................................................................................................8
6.1 When to Use Camping Strategy Switch for Mass Event................................................................................................8
6.2 Network Planning...........................................................................................................................................................8
6.3 Deployment....................................................................................................................................................................8
6.3.1 Requirements...............................................................................................................................................................8
6.3.2 Data Preparation..........................................................................................................................................................9
6.3.3 Activation (Using MML Commands).......................................................................................................................11
6.3.4 Activation (Using the CME)......................................................................................................................................12
6.3.5 Activation Observation..............................................................................................................................................13
6.3.6 Reconfiguration.........................................................................................................................................................14
6.3.7 Deactivation (Using MML Commands)....................................................................................................................14
6.3.8 Deactivation (Using the CME)..................................................................................................................................14
6.4 Performance Monitoring...............................................................................................................................................15
6.5 Parameter Optimization................................................................................................................................................15
6.6 Troubleshooting............................................................................................................................................................16
7 Parameters.....................................................................................................................................17
8 Counters........................................................................................................................................86
9 Glossary.........................................................................................................................................87
ii
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Contents
10 Reference Documents...............................................................................................................88
iii
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
1.1 Scope
This document describes WRFD-151203 Camping Strategy Switch for Mass Event, including
its technical principles, related features, network impact, and engineering guidelines.
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
Draft A (2014-01-20)
This document is created for RAN16.0
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
2 Overview
Overview
Special events, such as large gatherings, concerts, and sporting events, often result in sudden
and dramatic increases in traffic. On multi-carrier networks with preferred camping, such
increases in traffic usually lead to access congestion in preferentially camped cells and cause
key performance indicators (KPIs) to deteriorate. To alleviate access congestion and increase
the radio resource control (RRC) connection setup success rate, the Camping Strategy Switch
for Mass Event feature changes the network camping strategy from preferred camping to random
camping.
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
2 Overview
2.1 Definition
Preferred Camping Preferred camping is often used together with the service steering function.
When this strategy is used: A UE in idle mode preferentially camps on a cell delivering
contiguous coverage. This cell then becomes the UE's preferentially camped cell. When the UE
initiates an R99 service, the RNC instructs the UE to process the service in its preferentially
camped cell. When the UE initiates a High Speed Packet Access (HSPA) service, the RNC
instructs the UE to move to an inter-frequency co-coverage neighboring cell through the directed
retry or redirection procedure to process the service. This strategy preferentially guarantees
speech quality for R99 voice services.
Random Camping When random camping is used, UEs in idle mode randomly camp on cells.
This strategy maximizes capacity for multi-carrier networks.
2.2 Benefits
During special events, this feature balances loads across cells using different frequencies. In
addition, this feature increases the following items:
l
Number of High Speed Packet Access (HSPA) bytes transmitted from the Radio Link
Control (RLC) layer
RRC connection setup success rate by 3% to 15% for preferentially camped cells
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
3 Technical Description
Technical Description
Filters out cell 1's blind-handover-supporting neighboring cells under the same RNC based
on the value of the BlindHoFlag parameter.
2.
Determines whether cell 1 is a preferentially camped cell, compared with its inter-frequency
blind-handover-supporting neighboring cells.
The following description uses cell 2 as an example, which is an inter-frequency blindhandover-supporting neighboring cell of cell 1. If any of the following conditions is met,
the RNC determines that cell 1 is a preferentially camped cell, compared with cell 2:
When the QualMeas parameter is set to CPICH_RSCP, the offset (indicated by
IdleQoffset1sn) of cell 2 from cell 1 is less than or equal to the value of the
PrefCampRscpThd parameter.
When the QualMeas parameter is set to CPICH_ECNO, the offset (indicated by
IdleQoffset2sn) of cell 2 from cell 1 is less than or equal to the value of the
PrefCampRscpThd parameter.
The value of the IdleCellBarred parameter is NOT_BARRED for cell 1 and BARRED for
cell 2.
3.
Periodically checks whether cell 1 meets both of the following conditions within 15
minutes:
The ratio of rejected RRC connection setup requests due to power and code resource
congestion to the total RRC connection setup requests is greater than or equal to the value
of the RrcRejByCongRatioThd parameter.
If any of the preceding conditions is not met, the RNC does not trigger the Camping Strategy
Switch for Mass Event feature.
If both of the preceding conditions are met, the RNC determines that there is a sudden sharp
increase in cell 1's traffic and triggers the feature in cell 1. The RNC then includes the following
parameter settings into system information blocks (SIBs) to change the camping strategy applied
to cells 1 and 2 from preferred camping to random camping.
Issue Draft A (2014-01-20)
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
3 Technical Description
SIB3: The SsearchHCS parameter in the ADD UCELLHCS command uses the value of
the same parameter in the SET UCAMPSTRATFORMASS command.
After the RNC includes the preceding parameter settings into SIB3, the Cell camp policy
switching state in heavy traffic domain value is Optimizing for cell 1 and Correlated
optimizing for cell 2. The domain values are obtained by running the DSP UCELLLCHK
command.
If cell 1 does not support blind handovers from cell 2 (BlindHoFlag is set to False), the RNC
uses the RetryOptSwitch to control whether to configure cell 1 as the target cell for directed
retries or redirections from cell 2. If cell 1 supports blind handovers from cell 2
(BlindHoFlag is set to True), the RetryOptSwitch does not take effect.
This feature can cause a maximum of seven inter-frequency blind-handover-supporting
neighboring cells of cell 1 to enter the Correlated optimizing state. In addition, each of these
neighboring cells can enter this state due to a maximum of three preferentially camped cells.
NOTE
l The RNC only includes the preceding parameter settings into SIB3, and the configuration data of cells
1 and 2 actually remains unchanged.
l The RNC will not include the preceding parameter settings into SIB3 for cell 2 if the
CELLADMINSTATE parameter of cell 2 is set to HIGHBLKPREP, MEDIUMBLKPREP,
LOWBLKPREP, or BLOCK, or if the DSSFlag parameter of cell 2 is set to Configured.
l When this feature is taking effect in a cell, the function of inter-frequency directed retry decision (DRD)
for service steering and the function of redirection during the RRC connection release phase fail. When
this feature stops taking effect, these functions resume.
4.
Restores settings for the preceding parameters and includes restored parameter settings into
SIBs at 4:40 every day to resume the original camping strategy for cells 1 and 2.
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
4 Related Features
Related Features
Prerequisite Features
None
Impacted Features
When the Camping Strategy Switch for Mass Event feature is taking effect, the WRFD-020105
Potential User Control feature stops taking effect. When the Camping Strategy Switch for Mass
Event feature stops taking effect, the Potential User Control feature resumes. For details about
the Potential User Control feature, see Load Control Feature Parameter Description.
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
5 Network Impact
Network Impact
System Capacity
During special events, this feature increases the following items:
l
Network Performance
If there is a sharp increase in a network's traffic mainly due to downlink power resource
congestion, this feature increases the RRC connection setup success rate by 3% to 15% and the
radio access bearer (RAB) setup success rate for preferentially camped cells. The reason is as
follows:
After the congestion occurs, UEs continuously attempt to access the network and as a result
power consumption increases. After the network camping strategy changes to random camping,
the number of continuous access attempts decreases and therefore power consumption is
reduced.
If the sharp increase is mainly caused by SF code or (equivalent number of users) ENU resource
insufficiency, this feature cannot greatly increase the RRC connection setup success rate. This
is because the number of SF codes and the ENU do not increase after the network camping
strategy changes to random camping.
This feature cannot provide noticeable gains if the capability of a preferentially camped cell is
different from that of the corresponding non-preferentially camped cell, for example, a
preferentially camped cell supports only R99 services but the corresponding non-preferentially
camped cell supports HSPA services. The reason is as follows:
The two cells support different types of services. In this case, UE and service allocation between
the two cells cannot be balanced.
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
6 Engineering Guidelines
Engineering Guidelines
Some micro cells use the same frequency as some macro cells.
For example, cell 1 (a macro cell) is a preferentially camped cell, compared with cell 2 (another
macro cell). In the coverage area of cell 1, a micro cell is deployed. After the network camping
strategy is changed from preferred camping to random camping, blind-handover-based directed
retries from cell 2 to cell 1 will fail, resulting in a reduced directed retry success rate.
6.3 Deployment
6.3.1 Requirements
l
License
Before using this feature, purchase the license controlling this feature and activate the
license on the RNC. For details about the license items and how to activate the license, see
License Management Feature Parameter Description. The following table lists the license
information for this feature.
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
6 Engineering Guidelines
Feature ID
Feature
Name
License
Control Item
NE
Sales Unit
WRFD-15120
3
Camping
Strategy
Switch for
Mass Event
Camping
Strategy
Switch for
Mass Event
(per Cell)
RNC
per Cell
Parameter ID
Setting Notes
Data Source
PrefCampRscpThd
Network planning
PrefCampEcNoThd
Network planning
RrcConnSumThd
Network planning
RrcRejByCongRatioThd
Network planning
Threshold for
Trigger Inte-Freq
Cell Reselect in Idle
IdleSintersearch
Network planning
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
SsearchHCS
Network planning
10
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
Retry Optimization
Switch
RetryOptSwitch
Network planning
Turning on this
switch on a network
where UEs
preferentially camp
on high-frequencyband cells instead of
low-frequency-band
cells allows blindhandover-based
directed retries from
low-frequency-band
cells to highfrequency-band
cells. This results in a
reduced directed
retry success rate.
Therefore, do not
turn on this switch on
such a network.
11
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
6 Engineering Guidelines
Step 3 Run the RNC MML command ADD UCELLLICENSE and select the
CAMPING_STRATEGY_SWITCH check box under the FuncSwitch2 parameter to activate
the feature license for the cell.
----End
When configuring the Camping Strategy Switch for Mass Event feature on the CME, perform a single
configuration first, and then perform a batch modification if required. Configure the parameters of a single
object before a batch modification. Perform a batch modification before logging out of the parameter setting
interface.
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
UCELLAL
GOSWITC
H
RNC
Switch for
Cell Load
Control
NBMLdcAl
goSwitch
Yes
UCAMPST
RATFORM
ASS
RNC
RSCP
Threshold
for Preferred
Camping
PrefCampR
scpThd
Yes
12
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
SN
MO
UCELLLIC
ENSE
NE
RNC
6 Engineering Guidelines
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
Ec/No
Threshold
for Preferred
Camping
PrefCampE
cNoThd
Yes
Threshold
for RRC
Connection
Setup
Request
RrcConnSu
mThd
Yes
Threshold
for Reject
RRC
Request Perc
If
Congestion
RrcRejByCo
ngRatioThd
Yes
Threshold
IdleSinterse
for Trigger
arch
Inte-Freq
Cell Reselect
in Idle
Yes
Threshold
for Inter/
Intra-Freq
HCS Cell
Reselect
SsearchHC
S
Yes
Retry
Optimizatio
n Switch
RetryOptSwi
tch
Yes
Function
Switch2
FuncSwitch
2
Yes
13
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
6 Engineering Guidelines
6.3.6 Reconfiguration
Run the SET UCAMPSTRATFORMASS command to increase or decrease the values of the
Threshold for RRC Connection Setup Request and Threshold for Reject RRC Request Perc If
Congestion parameters to control the probability that this feature is triggered.
When configuring the Camping Strategy Switch for Mass Event feature on the CME, perform a single
configuration first, and then perform a batch modification if required. Configure the parameters of a single
object before a batch modification. Perform a batch modification before logging out of the parameter setting
interface.
14
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
6 Engineering Guidelines
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
UCELLAL
GOSWITC
H
RNC
Switch for
Cell Load
Control
NBMLdcAl
goSwitch
Yes
15
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
6 Engineering Guidelines
6.6 Troubleshooting
None
16
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameters
NE
MML
Command
Feature ID
Feature Name
Description
BlindHoFlag
BSC6900
ADD
UINTERFREQ
NCELL
WRFD-020103
Inter Frequency
Load Balance
Meaning:Wheth
er a neighboring
cell is a
candidate cell
for blind
handovers.
Value FALSE
indicates that the
neighboring cell
is not considered
as a candidate
cell for blind
handovers.
Therefore, blind
handovers to
this cell cannot
be triggered.
Value TRUE
indicates that the
cell is
considered as a
candidate cell
for blind
handovers and
blind handovers
to this cell can be
triggered.
MOD
UINTERFREQ
NCELL
WRFD-021200
WRFD-020122
WRFD-020400
01
WRFD-020117
WRFD-020400
HCS
(Hierarchical
Cell Structure)
Multi-Carrier
Switch off
Based on QoS
Intra System
Direct Retry
Multi-Carrier
Switch off
Based on Traffic
Load
DRD
Introduction
Package
GUI Value
Range:FALSE,
TRUE
Unit:None
Issue Draft A (2014-01-20)
17
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:FALSE,
TRUE
Default
Value:False
BlindHoFlag
BSC6910
ADD
UINTERFREQ
NCELL
MOD
UINTERFREQ
NCELL
WRFD-020103
WRFD-021200
WRFD-020122
WRFD-020400
01
WRFD-020117
WRFD-020400
Inter Frequency
Load Balance
HCS
(Hierarchical
Cell Structure)
Multi-Carrier
Switch off
Based on QoS
Intra System
Direct Retry
Multi-Carrier
Switch off
Based on Traffic
Load
DRD
Introduction
Package
Meaning:Wheth
er a neighboring
cell is a
candidate cell
for blind
handovers.
Value FALSE
indicates that the
neighboring cell
is not considered
as a candidate
cell for blind
handovers.
Therefore, blind
handovers to
this cell cannot
be triggered.
Value TRUE
indicates that the
cell is
considered as a
candidate cell
for blind
handovers and
blind handovers
to this cell can be
triggered.
GUI Value
Range:FALSE,
TRUE
Unit:None
Actual Value
Range:FALSE,
TRUE
Default
Value:False
18
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
QualMeas
BSC6900
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Measu
rement quantity
of cell selection
and reselection.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:CPICH_
ECNO(CPICH
Ec/N0),
CPICH_RSCP
(CPICH RSCP)
Unit:None
Actual Value
Range:CPICH_
ECNO,
CPICH_RSCP
Default
Value:CPICH_
ECNO(CPICH
Ec/N0)
19
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
QualMeas
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Measu
rement quantity
of cell selection
and reselection.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:CPICH_
ECNO(CPICH
Ec/N0),
CPICH_RSCP
(CPICH RSCP)
Unit:None
Actual Value
Range:CPICH_
ECNO,
CPICH_RSCP
Default
Value:CPICH_
ECNO(CPICH
Ec/N0)
20
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IdleQoffset1sn
BSC6900
ADD
UINTERFREQ
NCELL
WRFD-010801
Meaning:Offset
of the measured
CPICH RSCP
used for cell
reselection
when the UE is
in idle mode. In
a cell reselection
procedure, the
RNC subtracts
this offset from
the measured
CPICH RSCP of
a neighboring
cell and then
ranks all
neighboring
cells. For
details, see
3GPP TS
25.304.
MOD
UINTERFREQ
NCELL
WRFD-010802
WRFD-150232
WRFD-010611
12
GUI Value
Range:-50~50
Unit:dB
Actual Value
Range:-50~50
Default Value:0
21
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IdleQoffset1sn
BSC6910
ADD
UINTERFREQ
NCELL
WRFD-010801
Meaning:Offset
of the measured
CPICH RSCP
used for cell
reselection
when the UE is
in idle mode. In
a cell reselection
procedure, the
RNC subtracts
this offset from
the measured
CPICH RSCP of
a neighboring
cell and then
ranks all
neighboring
cells. For
details, see
3GPP TS
25.304.
MOD
UINTERFREQ
NCELL
WRFD-010802
WRFD-150232
WRFD-010611
12
GUI Value
Range:-50~50
Unit:dB
Actual Value
Range:-50~50
Default Value:0
22
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
PrefCampRscp
Thd
BSC6900
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Receiv
ed signal code
power (RSCP)
threshold for
preferred
camping. When
the value of
"IdleQoffset1sn
" in the "ADD
UINTERFREQ
NCELL"
command is less
than or equal to
this threshold,
the current
neighboring cell
is a
preferentially
camped cell
compared with
the cell being
configured. For
example, when
you configure an
inter-frequency
neighboring cell
(cell B) for cell
A, cell B is a
preferentially
camped cell
compared with
cell A after you
set related
parameters as
follows:
"IdleQoffset1sn
" is set to -12.
"PrefCampRscp
Thd" is set to
-10.
GUI Value
Range:-50~-1
Unit:dB
Actual Value
Range:-50~-1
23
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Default
Value:-10
24
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
PrefCampRscp
Thd
BSC6910
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Receiv
ed signal code
power (RSCP)
threshold for
preferred
camping. When
the value of
"IdleQoffset1sn
" in the "ADD
UINTERFREQ
NCELL"
command is less
than or equal to
this threshold,
the current
neighboring cell
is a
preferentially
camped cell
compared with
the cell being
configured. For
example, when
you configure an
inter-frequency
neighboring cell
(cell B) for cell
A, cell B is a
preferentially
camped cell
compared with
cell A after you
set related
parameters as
follows:
"IdleQoffset1sn
" is set to -12.
"PrefCampRscp
Thd" is set to
-10.
GUI Value
Range:-50~-1
Unit:dB
Actual Value
Range:-50~-1
25
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Default
Value:-10
IdleQoffset2sn
BSC6900
ADD
UINTERFREQ
NCELL
MOD
UINTERFREQ
NCELL
WRFD-010801
WRFD-010802
WRFD-150232
WRFD-010611
12
Meaning:Offset
of the measured
CPICH Ec/No
used for cell
reselection
when the UE is
in idle mode. In
a cell reselection
procedure, the
RNC subtracts
this offset from
the measured
CPICH Ec/No
of a neighboring
cell and then
ranks all
neighboring
cells.
GUI Value
Range:-50~50
Unit:dB
Actual Value
Range:-50~50
Default Value:0
26
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IdleQoffset2sn
BSC6910
ADD
UINTERFREQ
NCELL
WRFD-010801
Meaning:Offset
of the measured
CPICH Ec/No
used for cell
reselection
when the UE is
in idle mode. In
a cell reselection
procedure, the
RNC subtracts
this offset from
the measured
CPICH Ec/No
of a neighboring
cell and then
ranks all
neighboring
cells.
MOD
UINTERFREQ
NCELL
WRFD-010802
WRFD-150232
WRFD-010611
12
GUI Value
Range:-50~50
Unit:dB
Actual Value
Range:-50~50
Default Value:0
27
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IdleCellBarred
BSC6900
ADD
UCELLACCES
SSTRICT
WRFD-021103
Access Class
Restriction
Meaning:Wheth
er a UE in idle
mode is allowed
to access the
cell. When this
parameter is set
to BARRED, it
indicates that the
UE in idle mode
is barred to
select/reselect
the cell even in
the case of
emergency calls.
For details about
this parameter,
see 3GPP TS
25.331.
MOD
UCELLACCES
SSTRICT
GUI Value
Range:BARRE
D,
NOT_BARRED
Unit:None
Actual Value
Range:BARRE
D,
NOT_BARRED
Default
Value:None
28
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IdleCellBarred
BSC6910
ADD
UCELLACCES
SSTRICT
WRFD-021103
Access Class
Restriction
Meaning:Wheth
er a UE in idle
mode is allowed
to access the
cell. When this
parameter is set
to BARRED, it
indicates that the
UE in idle mode
is barred to
select/reselect
the cell even in
the case of
emergency calls.
For details about
this parameter,
see 3GPP TS
25.331.
MOD
UCELLACCES
SSTRICT
GUI Value
Range:BARRE
D,
NOT_BARRED
Unit:None
Actual Value
Range:BARRE
D,
NOT_BARRED
Default
Value:None
29
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
RrcConnSumTh
d
BSC6900
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Thresh
old for the
number of RRC
connection
setup requests
within 5 min in a
cell. This
threshold is one
condition for
determining
whether there is
a sudden and
dramatic
increase in a
cell's traffic. To
determine that a
cell experiences
a sudden and
dramatic
increase in
traffic, this
threshold must
be reached or
exceeded.
GUI Value
Range:1~65535
Unit:None
Actual Value
Range:1~65535
Default Value:
600
30
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
RrcConnSumTh
d
BSC6910
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Thresh
old for the
number of RRC
connection
setup requests
within 5 min in a
cell. This
threshold is one
condition for
determining
whether there is
a sudden and
dramatic
increase in a
cell's traffic. To
determine that a
cell experiences
a sudden and
dramatic
increase in
traffic, this
threshold must
be reached or
exceeded.
GUI Value
Range:1~65535
Unit:None
Actual Value
Range:1~65535
Default Value:
600
31
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
RrcRejByCong
RatioThd
BSC6900
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Thresh
old for the
number of RRC
connection
setup requests
rejected due to
Uu resource
congestion. This
threshold is one
condition for
determining
whether there is
a sudden and
dramatic
increase in a
cell's traffic. To
determine that a
cell experiences
a sudden and
dramatic
increase in
traffic, this
threshold must
be reached or
exceeded.
GUI Value
Range:0~100
Unit:%
Actual Value
Range:0~100
Default Value:2
32
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
RrcRejByCong
RatioThd
BSC6910
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Thresh
old for the
number of RRC
connection
setup requests
rejected due to
Uu resource
congestion. This
threshold is one
condition for
determining
whether there is
a sudden and
dramatic
increase in a
cell's traffic. To
determine that a
cell experiences
a sudden and
dramatic
increase in
traffic, this
threshold must
be reached or
exceeded.
GUI Value
Range:0~100
Unit:%
Actual Value
Range:0~100
Default Value:2
33
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IdleSintersearch
BSC6900
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Thresh
old for interfrequency cell
measurements
in idle mode in
SIB3. When the
quality (CPICH
Ec/No measured
by the UE) of the
serving cell is
lower than this
threshold plus
the value of
"Qqualmin" for
the cell, interfrequency cell
measurements
are started.
When this
parameter is set
to 127, interfrequency cell
measurements
are performed.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:-16~10;1
27
Unit:2dB
Actual Value
Range:-32~20,
127
Default Value:4
34
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IdleSintersearch
BSC6910
ADD
UCELLSELRE
SEL
WRFD-010801
Meaning:Thresh
old for interfrequency cell
measurements
in idle mode in
SIB3. When the
quality (CPICH
Ec/No measured
by the UE) of the
serving cell is
lower than this
threshold plus
the value of
"Qqualmin" for
the cell, interfrequency cell
measurements
are started.
When this
parameter is set
to 127, interfrequency cell
measurements
are performed.
For details about
this parameter,
see 3GPP TS
25.304.
MOD
UCELLSELRE
SEL
WRFD-010802
GUI Value
Range:-16~10;1
27
Unit:2dB
Actual Value
Range:-32~20,
127
Default Value:4
35
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
SsearchHCS
BSC6900
ADD
UCELLHCS
WRFD-010801
MOD
UCELLHCS
WRFD-010802
WRFD-021200
HCS
(Hierarchical
Cell Structure)
Inter RNC Cell
Update
GUI Value
Range:-53~45
Unit:2dB
Actual Value
Range:-105~91
Default Value:0
36
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
SsearchHCS
BSC6910
ADD
UCELLHCS
WRFD-010801
MOD
UCELLHCS
WRFD-010802
WRFD-021200
HCS
(Hierarchical
Cell Structure)
Inter RNC Cell
Update
GUI Value
Range:-53~45
Unit:2dB
Actual Value
Range:-105~91
Default Value:0
37
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IsAccessClass0
Barred
BSC6900
ADD
UCELLACCES
SSTRICT
WRFD-021103
Access Class
Restriction
Meaning:Indicat
ing whether the
UE allocated
with Access
Class 0 can be
allowed to
initiate access to
the radio
network. The
UE judges
whether it
belongs to this
access class
based on the
SIM/USIM. For
details about this
parameter, see
3GPP TS
25.331.
MOD
UCELLACCES
SSTRICT
GUI Value
Range:BARRE
D,
NOT_BARRED
Unit:None
Actual Value
Range:BARRE
D,
NOT_BARRED
Default
Value:NOT_BA
RRED
38
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IsAccessClass0
Barred
BSC6910
ADD
UCELLACCES
SSTRICT
WRFD-021103
Access Class
Restriction
Meaning:Indicat
ing whether the
UE allocated
with Access
Class 0 can be
allowed to
initiate access to
the radio
network. The
UE judges
whether it
belongs to this
access class
based on the
SIM/USIM. For
details about this
parameter, see
3GPP TS
25.331.
MOD
UCELLACCES
SSTRICT
GUI Value
Range:BARRE
D,
NOT_BARRED
Unit:None
Actual Value
Range:BARRE
D,
NOT_BARRED
Default
Value:NOT_BA
RRED
39
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IsAccessClass1
5Barred
BSC6900
ADD
UCELLACCES
SSTRICT
WRFD-021103
Access Class
Restriction
Meaning:Indicat
ing whether the
UE allocated
with Access
Class 15 can be
allowed to
initiate access to
the radio
network. The
UE judges
whether it
belongs to this
access class
based on the
SIM/USIM. For
details about this
parameter, see
3GPP TS
25.331.
MOD
UCELLACCES
SSTRICT
GUI Value
Range:BARRE
D,
NOT_BARRED
Unit:None
Actual Value
Range:BARRE
D,
NOT_BARRED
Default
Value:NOT_BA
RRED
40
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IsAccessClass1
5Barred
BSC6910
ADD
UCELLACCES
SSTRICT
WRFD-021103
Access Class
Restriction
Meaning:Indicat
ing whether the
UE allocated
with Access
Class 15 can be
allowed to
initiate access to
the radio
network. The
UE judges
whether it
belongs to this
access class
based on the
SIM/USIM. For
details about this
parameter, see
3GPP TS
25.331.
MOD
UCELLACCES
SSTRICT
GUI Value
Range:BARRE
D,
NOT_BARRED
Unit:None
Actual Value
Range:BARRE
D,
NOT_BARRED
Default
Value:NOT_BA
RRED
RetryOptSwitch
BSC6910
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:None
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:OFF, ON
Default
Value:OFF
41
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
DSSFlag
BSC6900
ADD
UCELLSETUP
None
None
Meaning:Wheth
er a cell supports
Dynamic
Spectrum
Sharing (DSS).
MOD
UCELLSETUP
GUI Value
Range:TRUE,
FALSE
Unit:None
Actual Value
Range:TRUE ,
FALSE
Default
Value:False
DSSFlag
BSC6910
ADD
UCELLSETUP
None
None
MOD
UCELLSETUP
Meaning:Wheth
er a cell supports
Dynamic
Spectrum
Sharing (DSS).
GUI Value
Range:TRUE,
FALSE
Unit:None
Actual Value
Range:TRUE ,
FALSE
Default
Value:False
42
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
PrefCampEcNo
Thd
BSC6900
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Receiv
ed energy per
chip divided by
the power
density in the
band (Ec/No)
threshold for
preferred
camping. When
the value of
"IdleQoffset2sn
" in the "ADD
UINTERFREQ
NCELL"
command is less
than or equal to
this threshold,
the current
neighboring cell
is a
preferentially
camped cell
compared with
the cell being
configured. For
example, when
you configure an
inter-frequency
neighboring cell
(cell B) for cell
A, cell B is a
preferentially
camped cell
compared with
cell A after you
set related
parameters as
follows:
"IdleQoffset2sn
" is set to -12.
"PrefCampEcN
oThd" is set to
-10.
GUI Value
Range:-50~-1
Unit:dB
43
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:-50~-1
Default
Value:-10
44
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
PrefCampEcNo
Thd
BSC6910
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Receiv
ed energy per
chip divided by
the power
density in the
band (Ec/No)
threshold for
preferred
camping. When
the value of
"IdleQoffset2sn
" in the "ADD
UINTERFREQ
NCELL"
command is less
than or equal to
this threshold,
the current
neighboring cell
is a
preferentially
camped cell
compared with
the cell being
configured. For
example, when
you configure an
inter-frequency
neighboring cell
(cell B) for cell
A, cell B is a
preferentially
camped cell
compared with
cell A after you
set related
parameters as
follows:
"IdleQoffset2sn
" is set to -12.
"PrefCampEcN
oThd" is set to
-10.
GUI Value
Range:-50~-1
Unit:dB
45
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:-50~-1
Default
Value:-10
IdleSintersearch
BSC6900
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Thresh
old for
triggering interfrequency cell
reselections for
UEs in idle
mode when the
network
camping
strategy is
changed from
preferred
camping to
random
camping. An
inter-frequency
cell reselection
is triggered if a
UE detects that
the CPICH Ec/
No of the
serving cell is
lower than the
sum of this
threshold and
the value of
"Qqualmin". For
details about this
parameter, see
3GPP TS
25.304.
GUI Value
Range:-16~10
Unit:2dB
Actual Value
Range:-32~20
Default Value:6
46
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
IdleSintersearch
BSC6910
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Thresh
old for
triggering interfrequency cell
reselections for
UEs in idle
mode when the
network
camping
strategy is
changed from
preferred
camping to
random
camping. An
inter-frequency
cell reselection
is triggered if a
UE detects that
the CPICH Ec/
No of the
serving cell is
lower than the
sum of this
threshold and
the value of
"Qqualmin". For
details about this
parameter, see
3GPP TS
25.304.
GUI Value
Range:-16~10
Unit:2dB
Actual Value
Range:-32~20
Default Value:6
47
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
SsearchHCS
BSC6900
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Thresh
old for inter- or
intra-frequency
hierarchical cell
structure (HCS)
cell reselection
when the
network
camping
strategy is
changed from
preferred
camping to
random
camping. If the
Srxlev value of
the serving cell
for a UE is
smaller than this
parameter value,
the UE starts
measuring the
signal quality of
all the inter- and
intra-frequency
HCS cells. The
GUI value -53
corresponds to
the actual value
-105 and the
GUI value -52
corresponds to
the actual value
-103, indicating
that the
difference
between every
two actual
values is 2. For
details about this
parameter, see
3GPP TS
25.304.
GUI Value
Range:-53~45
Unit:2dB
48
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:-105~91
Default Value:
10
49
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
SsearchHCS
BSC6910
SET
UCAMPSTRA
TFORMASS
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Thresh
old for inter- or
intra-frequency
hierarchical cell
structure (HCS)
cell reselection
when the
network
camping
strategy is
changed from
preferred
camping to
random
camping. If the
Srxlev value of
the serving cell
for a UE is
smaller than this
parameter value,
the UE starts
measuring the
signal quality of
all the inter- and
intra-frequency
HCS cells. The
GUI value -53
corresponds to
the actual value
-105 and the
GUI value -52
corresponds to
the actual value
-103, indicating
that the
difference
between every
two actual
values is 2. For
details about this
parameter, see
3GPP TS
25.304.
GUI Value
Range:-53~45
Unit:2dB
50
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:-105~91
Default Value:
10
51
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
NBMLdcAlgoS
witch
BSC6900
ADD
UCELLALGOS
WITCH
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Wheth
er to enable the
algorithms
related to cell
load control.
Selecting a
switch enables
the
corresponding
algorithm and
clearing a switch
disables the
corresponding
algorithm. 1.
INTRA_FREQ
UENCY_LDB:
Whether to
enable the cell
breathing
algorithm. This
algorithm
adjusts PCPICH transmit
power of a cell
based on the
downlink TCP
load to achieve
load balancing
between intrafrequency cells.
This algorithm
automatically
becomes invalid
when the loadbased dynamic
P-CPICH
transmit power
adjustment
algorithm
(controlled by
the
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH switch)
takes effect. 2.
PUC: Whether
to enable the
MOD
UCELLALGOS
WITCH
WRFD-020106
WRFD-150231
WRFD-150219
WRFD-150216
WRFD-150217
WRFD-150215
WRFD-010610
03
WRFD-020102
WRFD-140223
WRFD-150236
WRFD-020101
WRFD-140226
WRFD-020107
WRFD-020104
WRFD-020105
WRFD-020126
WRFD-010612
02
WRFD-020129
WRFD-010626
WRFD-010627
WRFD-020103
WRFD-010660
WRFD-010661
WRFD-010662
WRFD-010663
WRFD-010665
WRFD-140102
WRFD-010660
04
WRFD-010616
06
Load
Reshuffling
RIM Based
UMTS Target
Cell Selection
for LTE
Coverage Based
PS Redirection
from UMTS to
LTE
Load Based PS
Redirection
from UMTS to
LTE
Load Based PS
Handover from
UMTS to LTE
SRVCC from
LTE to UMTS
with PS
Handover
HSDPA
Admission
Control
Load
Measurement
MOCN Cell
Resource
Demarcation
Load Based
Dynamic
Adjustment of
PCPICH
Admission
Control
WRFD-010660
02
Fast Return
from UMTS to
LTE
WRFD-010660
03
Overload
Control
52
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
WRFD-010660
01
Intra Frequency
Load Balance
WRFD-010616
05
Potential User
Control
WRFD-150220
Mobility
Between UMTS
and LTE Phase 1
Potential User
Control (PUC)
algorithm. This
algorithm
adjusts cell
selection and
reselection
parameters
based on the cell
load to enable
UEs to reselect
lightly loaded
cells. 3.
UL_UU_OLC:
Whether to
enable the
uplink overload
control (OLC)
algorithm.
When the uplink
power is
overloaded in a
cell, this
algorithm
alleviates the
uplink load by
using quick
transport format
(TF) restriction,
distributing best
effort (BE)
service to
common
channels, or
releasing UEs.
4.
DL_UU_OLC:
Whether to
enable the
downlink OLC
algorithm.
When the
downlink power
is overloaded in
a cell, this
algorithm
alleviates the
downlink load
WRFD-010616
01
WRFD-010616
03
WRFD-010616
02
WRFD-140217
WRFD-010616
04
WRFD-010616
WRFD-010616
08
WRFD-140218
HSUPA
Admission
Control
PS Service
Redirection
from UMTS to
LTE
MBMS FLC
(Frequency
Layer
Convergence)/
FLD(Frequency
Layer
Dispersion)
FACH
Transmission
Sharing for
MBMS
Inter Frequency
Load Balance
MBMS Phase 2
MBMS over Iur
Dynamic Power
Estimation for
MTCH
MSCH
Scheduling
MBMS Channel
Audience
Rating Statistics
CS Fallback
Guarantee for
LTE Emergency
Calls
Inter-Frequency
Neighboring
Cell Selection
53
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
by using quick
TF restriction,
distributing BE
services to
common
channels,
releasing UEs,
or reconfiguring
the maximum
transmit power
of FACHs. 5.
UL_UU_LDR:
Whether to
enable the
uplink load
reshuffling
(LDR)
algorithm.
When the uplink
load is heavy in
a cell, this
algorithm
alleviates the
uplink load by
using loadbased interfrequency
handovers, BE
service rate
reduction,
uncontrollable
real-time service
QoS
renegotiation,
load-based CS/
PS inter-RAT
handovers, and
AMR service
rate reduction. 6.
DL_UU_LDR:
Whether to
enable the
downlink LDR
algorithm.
When the
downlink load is
heavy in a cell,
this algorithm
Streaming
Service on
MBMS
MBMS P2P
over HSDPA
MBMS
Admission
Enhancement
MBMS
Enhanced
Broadcast Mode
MBMS
Transport
Resource
Management
Coverage Based
PS Handover
from UMTS to
LTE
MBMS
Broadcast Mode
MBMS Load
Control
MBMS
Admission
Control
Inter-Frequency
Load Balancing
Based on
Configurable
Load Threshold
MBMS Soft/
Selective
Combining
MBMS
Introduction
Package
16/32/64/128Kb
ps Channel Rate
on MBMS
Service-Based
PS Handover
Issue Draft A (2014-01-20)
54
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
from UMTS to
LTE
alleviates the
downlink load
by using loadbased interfrequency
handovers, BE
service rate
reduction,
uncontrollable
real-time service
QoS
renegotiation,
load-based CS/
PS inter-RAT
handovers,
AMR service
rate reduction,
and MBMS
power
restriction. 7.
OLC_EVENT
MEAS:
Whether to
enable OLC
event
measurement. 8.
CELL_CODE_
LDR: Whether
to enable cell
code reshuffling
algorithm. In the
event of code
resource
overuse, this
algorithm
alleviates the
code resource
overuse by using
BE service rate
reduction, code
tree reshuffling,
and load-based
inter-frequency
handovers. 9.
CELL_CREDIT
_LDR: Whether
to enable the cell
credit
55
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
reshuffling
algorithm. In the
event of cell
credit overuse,
this algorithm
alleviates the
credit overuse
by using loadbased interfrequency
handovers, BE
service rate
reduction,
uncontrollable
real-time service
QoS
renegotiation,
and load-based
CS/PS interRAT handovers.
10.
UL_INTRA_FR
EQUENCY_UL
B: Whether to
enable RTWPbased intrafrequency load
balancing
algorithm. This
algorithm
adjusts PCPICH transmit
power of a cell
based on the
RTWP load to
achieve load
balancing
between intrafrequency cells.
This algorithm
automatically
becomes invalid
when the loadbased dynamic
P-CPICH
transmit power
adjustment
algorithm
56
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
(controlled by
the
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH switch)
takes effect. 11.
UL_UU_CLB:
Whether to
enable the
uplink loadbased CLB
algorithm. This
algorithm
determines
whether a cell
enters the CLB
state by the
uplink load on
the air interface.
If a cell is in the
CLB state,
measurementbased interfrequency
handovers are
triggered
periodically to
achieve load
balancing
between interfrequency cells.
12.
DL_UU_CLB:
Whether to
enable the
downlink loadbased CLB
algorithm. This
algorithm
determines
whether a cell
enters the CLB
state by the
downlink load
on the air
interface. If a
cell is in the
57
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CLB state,
measurementbased interfrequency
handovers are
triggered
periodically to
achieve load
balancing
between interfrequency cells.
13.
CELL_CODE_
CLB: Whether
to enable code
resource-based
CLB algorithm.
This algorithm
determines
whether a cell
enters the CLB
state by the code
resource usage.
If a cell is in the
CLB state,
measurementbased interfrequency
handovers are
triggered
periodically to
achieve load
balancing
between interfrequency cells.
14.
CELL_CREDIT
_CLB: Whether
to enable creditbased CLB
algorithm. This
algorithm
determines
whether a cell
enters the CLB
state by the
credit resource
usage. If a cell is
58
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
in the CLB state,
measurementbased interfrequency
handovers are
triggered
periodically to
achieve load
balancing
between interfrequency cells.
15.
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH: Whether
to enable
downlink loadbased dynamic
primary
common pilot
channel (PCPICH) power
adjustment
algorithm. This
algorithm
adjusts the PCPICH transmit
power by the
downlink nonHSPA power
load to reduce
the downlink
non-HSPA
power load. If
this algorithm
takes effect,
other enabled
algorithms for
intra-frequency
load balancing
(based on TCP
or RTWP)
automatically
become invalid.
16.
ADAPTIVE_R
ACH: Function
59
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
switch for the
adaptive RACH
feature. When
this switch is
turned on, this
feature is
activated. In this
case, the RNC
adjusts the
random access
parameters
based on the
random access
state and on the
uplink power
load of the target
cell. When this
switch is turned
off, this feature
is deactivated.
17.
ACK_PRACH_
PREAM_MEA
S: Whether to
measure the
number of
acknowledged
PRACH
preambles.
When this
switch is turned
on, the RNC
measures the
number of
acknowledged
PRACH
preambles.
When this
switch is turned
off, the RNC
does not
measure the
number of
acknowledged
PRACH
preambles. 18.
CAMPING_ST
RATEGY_SWI
60
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
TCH: Whether
to enable the
camping policy
switching
function when
traffic is heavy.
This is a
function switch
for the function.
When the switch
is turned on, the
camping policy
switching
function is
enabled if traffic
is heavy in the
entire network.
Then, the target
cell is no longer
a preferred
camping cell for
the UE in
question, but a
random
camping cell.
GUI Value
Range:INTRA_
FREQUENCY_
LDB, PUC,
UL_UU_LDR,
DL_UU_LDR,
UL_UU_OLC,
DL_UU_OLC,
OLC_EVENT
MEAS,
CELL_CODE_
LDR,
CELL_CREDIT
_LDR,
UL_INTRA_FR
EQUENCY_UL
B,
UL_UU_CLB,
DL_UU_CLB,
CELL_CODE_
CLB,
CELL_CREDIT
61
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
_CLB,
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH,
ADAPTIVE_R
ACH,
ACK_PRACH_
PREAM_MEA
S,
CAMPING_ST
RATEGY_SWI
TCH
Unit:None
Actual Value
Range:INTRA_
FREQUENCY_
LDB, PUC,
UL_UU_LDR,
DL_UU_LDR,
UL_UU_OLC,
DL_UU_OLC,
OLC_EVENT
MEAS,
CELL_CODE_
LDR,
CELL_CREDIT
_LDR,
UL_INTRA_FR
EQUENCY_UL
B,
UL_UU_CLB,
DL_UU_CLB,
CELL_CODE_
CLB,
CELL_CREDIT
_CLB,
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH,
ADAPTIVE_R
ACH,
ACK_PRACH_
PREAM_MEA
S,
CAMPING_ST
62
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
RATEGY_SWI
TCH
Default
Value:INTRA_
FREQUENCY_
LDB:0,PUC:
0,UL_UU_LDR
:
0,DL_UU_LDR
:
0,UL_UU_OLC
:
0,DL_UU_OLC
:
0,OLC_EVENT
MEAS:
0,CELL_CODE
_LDR:
0,CELL_CRED
IT_LDR:
0,UL_INTRA_
FREQUENCY_
ULB:
0,UL_UU_CLB
:
0,DL_UU_CLB
:
0,CELL_CODE
_CLB:
0,CELL_CRED
IT_CLB:
0,DLLOAD_B
ASED_PCPICH
_PWR_ADJ_S
WITCH:
0,ADAPTIVE_
RACH:
0,ACK_PRAC
H_PREAM_M
EAS:
0,CAMPING_S
TRATEGY_S
WITCH:0
63
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
NBMLdcAlgoS
witch
BSC6910
ADD
UCELLALGOS
WITCH
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:Wheth
er to enable the
algorithms
related to cell
load control.
Selecting a
switch enables
the
corresponding
algorithm and
clearing a switch
disables the
corresponding
algorithm. 1.
INTRA_FREQ
UENCY_LDB:
Whether to
enable the cell
breathing
algorithm. This
algorithm
adjusts PCPICH transmit
power of a cell
based on the
downlink TCP
load to achieve
load balancing
between intrafrequency cells.
This algorithm
automatically
becomes invalid
when the loadbased dynamic
P-CPICH
transmit power
adjustment
algorithm
(controlled by
the
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH switch)
takes effect. 2.
PUC: Whether
to enable the
MOD
UCELLALGOS
WITCH
WRFD-020106
WRFD-150231
WRFD-150219
WRFD-150216
WRFD-150217
WRFD-150215
WRFD-010610
03
WRFD-020102
WRFD-140223
WRFD-150236
WRFD-020101
WRFD-140226
WRFD-020107
WRFD-020104
WRFD-020105
WRFD-020126
WRFD-010612
02
WRFD-020129
WRFD-010626
WRFD-010627
WRFD-020103
WRFD-010660
WRFD-010661
WRFD-010662
WRFD-010663
WRFD-010665
WRFD-140102
WRFD-010660
04
WRFD-010616
06
Load
Reshuffling
RIM Based
UMTS Target
Cell Selection
for LTE
Coverage Based
PS Redirection
from UMTS to
LTE
Load Based PS
Redirection
from UMTS to
LTE
Load Based PS
Handover from
UMTS to LTE
SRVCC from
LTE to UMTS
with PS
Handover
HSDPA
Admission
Control
Load
Measurement
MOCN Cell
Resource
Demarcation
Load Based
Dynamic
Adjustment of
PCPICH
Admission
Control
WRFD-010660
02
Fast Return
from UMTS to
LTE
WRFD-010660
03
Overload
Control
64
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
WRFD-010660
01
Intra Frequency
Load Balance
WRFD-010616
05
Potential User
Control
WRFD-150220
Mobility
Between UMTS
and LTE Phase 1
Potential User
Control (PUC)
algorithm. This
algorithm
adjusts cell
selection and
reselection
parameters
based on the cell
load to enable
UEs to reselect
lightly loaded
cells. 3.
UL_UU_OLC:
Whether to
enable the
uplink overload
control (OLC)
algorithm.
When the uplink
power is
overloaded in a
cell, this
algorithm
alleviates the
uplink load by
using quick
transport format
(TF) restriction,
distributing best
effort (BE)
service to
common
channels, or
releasing UEs.
4.
DL_UU_OLC:
Whether to
enable the
downlink OLC
algorithm.
When the
downlink power
is overloaded in
a cell, this
algorithm
alleviates the
downlink load
WRFD-010616
01
WRFD-010616
03
WRFD-010616
02
WRFD-140217
WRFD-010616
04
WRFD-010616
WRFD-010616
08
WRFD-140218
HSUPA
Admission
Control
PS Service
Redirection
from UMTS to
LTE
MBMS FLC
(Frequency
Layer
Convergence)/
FLD(Frequency
Layer
Dispersion)
FACH
Transmission
Sharing for
MBMS
Inter Frequency
Load Balance
MBMS Phase 2
MBMS over Iur
Dynamic Power
Estimation for
MTCH
MSCH
Scheduling
MBMS Channel
Audience
Rating Statistics
CS Fallback
Guarantee for
LTE Emergency
Calls
Inter-Frequency
Neighboring
Cell Selection
65
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
by using quick
TF restriction,
distributing BE
services to
common
channels,
releasing UEs,
or reconfiguring
the maximum
transmit power
of FACHs. 5.
UL_UU_LDR:
Whether to
enable the
uplink load
reshuffling
(LDR)
algorithm.
When the uplink
load is heavy in
a cell, this
algorithm
alleviates the
uplink load by
using loadbased interfrequency
handovers, BE
service rate
reduction,
uncontrollable
real-time service
QoS
renegotiation,
load-based CS/
PS inter-RAT
handovers, and
AMR service
rate reduction. 6.
DL_UU_LDR:
Whether to
enable the
downlink LDR
algorithm.
When the
downlink load is
heavy in a cell,
this algorithm
Streaming
Service on
MBMS
MBMS P2P
over HSDPA
MBMS
Admission
Enhancement
MBMS
Enhanced
Broadcast Mode
MBMS
Transport
Resource
Management
Coverage Based
PS Handover
from UMTS to
LTE
MBMS
Broadcast Mode
MBMS Load
Control
MBMS
Admission
Control
Inter-Frequency
Load Balancing
Based on
Configurable
Load Threshold
MBMS Soft/
Selective
Combining
MBMS
Introduction
Package
16/32/64/128Kb
ps Channel Rate
on MBMS
Service-Based
PS Handover
Issue Draft A (2014-01-20)
66
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
from UMTS to
LTE
alleviates the
downlink load
by using loadbased interfrequency
handovers, BE
service rate
reduction,
uncontrollable
real-time service
QoS
renegotiation,
load-based CS/
PS inter-RAT
handovers,
AMR service
rate reduction,
and MBMS
power
restriction. 7.
OLC_EVENT
MEAS:
Whether to
enable OLC
event
measurement. 8.
CELL_CODE_
LDR: Whether
to enable cell
code reshuffling
algorithm. In the
event of code
resource
overuse, this
algorithm
alleviates the
code resource
overuse by using
BE service rate
reduction, code
tree reshuffling,
and load-based
inter-frequency
handovers. 9.
CELL_CREDIT
_LDR: Whether
to enable the cell
credit
67
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
reshuffling
algorithm. In the
event of cell
credit overuse,
this algorithm
alleviates the
credit overuse
by using loadbased interfrequency
handovers, BE
service rate
reduction,
uncontrollable
real-time service
QoS
renegotiation,
and load-based
CS/PS interRAT handovers.
10.
UL_INTRA_FR
EQUENCY_UL
B: Whether to
enable RTWPbased intrafrequency load
balancing
algorithm. This
algorithm
adjusts PCPICH transmit
power of a cell
based on the
RTWP load to
achieve load
balancing
between intrafrequency cells.
This algorithm
automatically
becomes invalid
when the loadbased dynamic
P-CPICH
transmit power
adjustment
algorithm
68
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
(controlled by
the
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH switch)
takes effect. 11.
UL_UU_CLB:
Whether to
enable the
uplink loadbased CLB
algorithm. This
algorithm
determines
whether a cell
enters the CLB
state by the
uplink load on
the air interface.
If a cell is in the
CLB state,
measurementbased interfrequency
handovers are
triggered
periodically to
achieve load
balancing
between interfrequency cells.
12.
DL_UU_CLB:
Whether to
enable the
downlink loadbased CLB
algorithm. This
algorithm
determines
whether a cell
enters the CLB
state by the
downlink load
on the air
interface. If a
cell is in the
69
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CLB state,
measurementbased interfrequency
handovers are
triggered
periodically to
achieve load
balancing
between interfrequency cells.
13.
CELL_CODE_
CLB: Whether
to enable code
resource-based
CLB algorithm.
This algorithm
determines
whether a cell
enters the CLB
state by the code
resource usage.
If a cell is in the
CLB state,
measurementbased interfrequency
handovers are
triggered
periodically to
achieve load
balancing
between interfrequency cells.
14.
CELL_CREDIT
_CLB: Whether
to enable creditbased CLB
algorithm. This
algorithm
determines
whether a cell
enters the CLB
state by the
credit resource
usage. If a cell is
70
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
in the CLB state,
measurementbased interfrequency
handovers are
triggered
periodically to
achieve load
balancing
between interfrequency cells.
15.
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH: Whether
to enable
downlink loadbased dynamic
primary
common pilot
channel (PCPICH) power
adjustment
algorithm. This
algorithm
adjusts the PCPICH transmit
power by the
downlink nonHSPA power
load to reduce
the downlink
non-HSPA
power load. If
this algorithm
takes effect,
other enabled
algorithms for
intra-frequency
load balancing
(based on TCP
or RTWP)
automatically
become invalid.
16.
ADAPTIVE_R
ACH: Function
71
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
switch for the
adaptive RACH
feature. When
this switch is
turned on, this
feature is
activated. In this
case, the RNC
adjusts the
random access
parameters
based on the
random access
state and on the
uplink power
load of the target
cell. When this
switch is turned
off, this feature
is deactivated.
17.
ACK_PRACH_
PREAM_MEA
S: Whether to
measure the
number of
acknowledged
PRACH
preambles.
When this
switch is turned
on, the RNC
measures the
number of
acknowledged
PRACH
preambles.
When this
switch is turned
off, the RNC
does not
measure the
number of
acknowledged
PRACH
preambles. 18.
CAMPING_ST
RATEGY_SWI
72
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
TCH: Whether
to enable the
camping policy
switching
function when
traffic is heavy.
This is a
function switch
for the function.
When the switch
is turned on, the
camping policy
switching
function is
enabled if traffic
is heavy in the
entire network.
Then, the target
cell is no longer
a preferred
camping cell for
the UE in
question, but a
random
camping cell.
GUI Value
Range:INTRA_
FREQUENCY_
LDB, PUC,
UL_UU_LDR,
DL_UU_LDR,
UL_UU_OLC,
DL_UU_OLC,
OLC_EVENT
MEAS,
CELL_CODE_
LDR,
CELL_CREDIT
_LDR,
UL_INTRA_FR
EQUENCY_UL
B,
UL_UU_CLB,
DL_UU_CLB,
CELL_CODE_
CLB,
CELL_CREDIT
73
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
_CLB,
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH,
ADAPTIVE_R
ACH,
ACK_PRACH_
PREAM_MEA
S,
CAMPING_ST
RATEGY_SWI
TCH
Unit:None
Actual Value
Range:INTRA_
FREQUENCY_
LDB, PUC,
UL_UU_LDR,
DL_UU_LDR,
UL_UU_OLC,
DL_UU_OLC,
OLC_EVENT
MEAS,
CELL_CODE_
LDR,
CELL_CREDIT
_LDR,
UL_INTRA_FR
EQUENCY_UL
B,
UL_UU_CLB,
DL_UU_CLB,
CELL_CODE_
CLB,
CELL_CREDIT
_CLB,
DLLOAD_BAS
ED_PCPICH_P
WR_ADJ_SWI
TCH,
ADAPTIVE_R
ACH,
ACK_PRACH_
PREAM_MEA
S,
CAMPING_ST
74
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
RATEGY_SWI
TCH
Default
Value:INTRA_
FREQUENCY_
LDB:0,PUC:
0,UL_UU_LDR
:
0,DL_UU_LDR
:
0,UL_UU_OLC
:
0,DL_UU_OLC
:
0,OLC_EVENT
MEAS:
0,CELL_CODE
_LDR:
0,CELL_CRED
IT_LDR:
0,UL_INTRA_
FREQUENCY_
ULB:
0,UL_UU_CLB
:
0,DL_UU_CLB
:
0,CELL_CODE
_CLB:
0,CELL_CRED
IT_CLB:
0,DLLOAD_B
ASED_PCPICH
_PWR_ADJ_S
WITCH:
0,ADAPTIVE_
RACH:
0,ACK_PRAC
H_PREAM_M
EAS:
0,CAMPING_S
TRATEGY_S
WITCH:0
75
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
FuncSwitch2
BSC6900
ADD
UCELLLICEN
SE
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:
1.BASED_UE_
LOC_DRD_SW
ITCH: Whether
the function of
UE locationbased multifrequency-band
DRD is
available. When
the conditions of
path loss are
met, cell edge
UEs in a highfrequency-band
cell perform the
DRD procedure
towards a lowfrequency-band
cell, or cell
center UEs in a
low-frequencyband cell
perform the
DRD procedure
towards a highfrequency-band
cell. The
function of UE
location-based
multifrequency-band
DRD takes
effect only when
this parameter is
turned on and
the
"BasedUELocD
RDSwitch"
parameter in the
"SET UDRD" or
"ADD
UCELLDRD"
command is also
turned on. 2.
LOAD_BASED
_PCPICH_PW
R_ADJ:
MOD
UCELLLICEN
SE
WRFD-150236
WRFD-151201
WRFD-150232
WRFD-150246
Load Based
Dynamic
Adjustment of
PCPICH
Adaptive RACH
Multiband
Direct Retry
Based on UE
Location
Service Steering
and Load
Sharing in
CELL_FACH
State
76
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Whether the
license function
switch for Load
Based Dynamic
Adjustment of
PCPICH is
enabled. 3.
ADAPTIVE_R
ACH_SWITCH
(License Switch
for Adaptive
RACH): Celllevel license
switch for the
adaptive RACH
feature. When
this switch is
turned on, the
adaptive RACH
is activated.
When this
switch is turned
off, this feature
is deactivated. 4.
CAMPING_ST
RATEGY_SWI
TCH(Switch for
Camp Policy
Switching in
Heavy Traffic):
Whether to
enable the
camping policy
switching
function when
traffic is heavy.
This is a license
switch for the
function. When
the switch is
turned on, the
camping policy
switching
function is
enabled if traffic
is heavy in the
entire network.
Then, the target
77
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
cell is no longer
a preferred
camping cell for
the UE in
question, but a
random
camping cell. 5.
FACH_POOL_
SWITCH:
Function switch
for the FACH
Pool feature.
When this
switch is turned
on, the FACH
Pool feature is
activated and the
P2F-triggered
redirection
algorithm is also
activated. Note
that P2F
indicates a
CELL_PCH/
URA_PCH-toCELL_FACH
state transition.
6.
FACH_TRAFF
_STEER_AND
_LOAD_SHAR
E_SWITCH:
Function switch
for the Service
Steering and
Load Sharing in
CELL_FACH
State feature.
When this
switch is turned
on, this feature is
activated. This
feature
incorporates the
P2F-triggered
redirection
algorithm for
real-time
78
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
services, the
P2F-triggered
redirection
algorithm for
non-real-time
services, and the
algorithm of
P2F-triggered
redirection in
case of P2D
failures for realtime services.
GUI Value
Range:BASED_
UE_LOC_DRD
_SWITCH,
LOAD_BASED
_PCPICH_PW
R_ADJ,
ADAPTIVE_R
ACH_SWITCH
,
CAMPING_ST
RATEGY_SWI
TCH,
FACH_POOL_
SWITCH,
FACH_TRAFF
_STEER_AND
_LOAD_SHAR
E_SWITCH
Unit:None
Actual Value
Range:BASED_
UE_LOC_DRD
_SWITCH,
LOAD_BASED
_PCPICH_PW
R_ADJ,
ADAPTIVE_R
ACH_SWITCH
,
CAMPING_ST
RATEGY_SWI
TCH,
FACH_POOL_
SWITCH,
79
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
FACH_TRAFF
_STEER_AND
_LOAD_SHAR
E_SWITCH
Default
Value:BASED_
UE_LOC_DRD
_SWITCH:
0,LOAD_BASE
D_PCPICH_P
WR_ADJ:
0,ADAPTIVE_
RACH_SWITC
H:
0,CAMPING_S
TRATEGY_S
WITCH:
0,FACH_POOL
_SWITCH:
0,FACH_TRAF
F_STEER_AN
D_LOAD_SHA
RE_SWITCH:0
80
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
FuncSwitch2
BSC6910
ADD
UCELLLICEN
SE
WRFD-151203
Camping
Strategy Switch
for Mass Event
Meaning:
1.BASED_UE_
LOC_DRD_SW
ITCH: Whether
the function of
UE locationbased multifrequency-band
DRD is
available. When
the conditions of
path loss are
met, cell edge
UEs in a highfrequency-band
cell perform the
DRD procedure
towards a lowfrequency-band
cell, or cell
center UEs in a
low-frequencyband cell
perform the
DRD procedure
towards a highfrequency-band
cell. The
function of UE
location-based
multifrequency-band
DRD takes
effect only when
this parameter is
turned on and
the
"BasedUELocD
RDSwitch"
parameter in the
"SET UDRD" or
"ADD
UCELLDRD"
command is also
turned on. 2.
LOAD_BASED
_PCPICH_PW
R_ADJ:
MOD
UCELLLICEN
SE
WRFD-150236
WRFD-151201
WRFD-150232
WRFD-150246
Load Based
Dynamic
Adjustment of
PCPICH
Adaptive RACH
Multiband
Direct Retry
Based on UE
Location
Service Steering
and Load
Sharing in
CELL_FACH
State
81
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Whether the
license function
switch for Load
Based Dynamic
Adjustment of
PCPICH is
enabled. 3.
ADAPTIVE_R
ACH_SWITCH
(License Switch
for Adaptive
RACH): Celllevel license
switch for the
adaptive RACH
feature. When
this switch is
turned on, the
adaptive RACH
is activated.
When this
switch is turned
off, this feature
is deactivated. 4.
CAMPING_ST
RATEGY_SWI
TCH(Switch for
Camp Policy
Switching in
Heavy Traffic):
Whether to
enable the
camping policy
switching
function when
traffic is heavy.
This is a license
switch for the
function. When
the switch is
turned on, the
camping policy
switching
function is
enabled if traffic
is heavy in the
entire network.
Then, the target
82
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
cell is no longer
a preferred
camping cell for
the UE in
question, but a
random
camping cell. 5.
FACH_POOL_
SWITCH:
Function switch
for the FACH
Pool feature.
When this
switch is turned
on, the FACH
Pool feature is
activated and the
P2F-triggered
redirection
algorithm is also
activated. Note
that P2F
indicates a
CELL_PCH/
URA_PCH-toCELL_FACH
state transition.
6.
FACH_TRAFF
_STEER_AND
_LOAD_SHAR
E_SWITCH:
Function switch
for the Service
Steering and
Load Sharing in
CELL_FACH
State feature.
When this
switch is turned
on, this feature is
activated. This
feature
incorporates the
P2F-triggered
redirection
algorithm for
real-time
83
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
services, the
P2F-triggered
redirection
algorithm for
non-real-time
services, and the
algorithm of
P2F-triggered
redirection in
case of P2D
failures for realtime services.
GUI Value
Range:BASED_
UE_LOC_DRD
_SWITCH,
LOAD_BASED
_PCPICH_PW
R_ADJ,
ADAPTIVE_R
ACH_SWITCH
,
CAMPING_ST
RATEGY_SWI
TCH,
FACH_POOL_
SWITCH,
FACH_TRAFF
_STEER_AND
_LOAD_SHAR
E_SWITCH
Unit:None
Actual Value
Range:BASED_
UE_LOC_DRD
_SWITCH,
LOAD_BASED
_PCPICH_PW
R_ADJ,
ADAPTIVE_R
ACH_SWITCH
,
CAMPING_ST
RATEGY_SWI
TCH,
FACH_POOL_
SWITCH,
84
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
FACH_TRAFF
_STEER_AND
_LOAD_SHAR
E_SWITCH
Default
Value:BASED_
UE_LOC_DRD
_SWITCH:
0,LOAD_BASE
D_PCPICH_P
WR_ADJ:
0,ADAPTIVE_
RACH_SWITC
H:
0,CAMPING_S
TRATEGY_S
WITCH:
0,FACH_POOL
_SWITCH:
0,FACH_TRAF
F_STEER_AN
D_LOAD_SHA
RE_SWITCH:0
85
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
8 Counters
Counters
86
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
9 Glossary
Glossary
For the acronyms, abbreviations, terms, and definitions, see the Glossary.
87
WCDMA RAN
Camping Strategy Switch for Mass Event Feature Parameter
Description
10
10 Reference Documents
Reference Documents
None
88