Documente Academic
Documente Profesional
Documente Cultură
Q.No.
Question
Answers
1 Client is the highest level of hierarchy in the SAP system. The client is represented
in the SAP system as a
a. three character-length alpha numeric
b. three character-length integer only
c. four character-length alpha numeric
d. four character-length integer only
FALSE
TRUE
FALSE
FALSE
2 Each Client is an independent unit with Separate master records, a set of tables
and data. In order to log on to a client, You need to enter the
a. Client Number, User ID and the related password
b. Client Number, and a pre-defined password
c. Client Number and User ID
d. User ID and the related password
TRUE
FALSE
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
FALSE
TRUE
FALSE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
19 A Fiscal Year Variant may have less than 12 posting periods covering
12 months of a fiscal year and yet need not be a shortened fiscal year
TRUE
20 SAP contains pre-delivered currency keys for which you can define exchange
rates based on time-basis in order to accommodate exchange rate fluctuations
TRUE
FALSE
FALSE
TRUE
FALSE
TRUE
23 Worklists are tools which shortlistand limit SAP pre-delivered currencies to those
which your company code deals with
TRUE
FALSE
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
TRUE
TRUE
j. Indirect Quotation rates do not need a prefix whereas direct quotes need to be
prefixed with a slash / if most of your currencies use direct quotes
28 Reports RFTBFF00,RFTBDF07 and RFTBDF14 are some of the reports used for
periodic updation of the Exchange Rate table.
FALSE
TRUE
FALSE
TRUE
TRUE
FALSE
30 Creation of a Company Code from Company Code 1000 copies various Global
Parameters also
TRUE
Question
1 A Chart of Accounts is a variable which complies with the variant principle
principle. The Chart of Accounts in SAP is defined as a
a.
b.
c.
d.
Answers
FALSE
FALSE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
TRUE
FALSE
7 The minimum width of GL account can be 3 and the maximum width being 10
FALSE
FALSE
9 Presence of a chart of accounts segment helps in the creation of a GL Master record which
a. can be shared by more than one company code , each using a different Operating COA
b. always encourages cross company code transactions
c. may belong to different account groups in different company codes
d. shares the same Account Number and description in Company codes assigned to the
same Operating Chart of Accounts
TRUE
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
18 You have created two GL Accounts i. Sundry Debtors and ii. Sundry Creditors and
you have configured them as reconciliation accounts.
a. You can post a Sale transaction by debiting Sundry Debtors GL as a line item
b. You cannot make payment to your vendor by crediting Sundry Creditors GL as a
line item
FALSE
TRUE
19 Field Status for GL Master records can be set principally in the related account group
which may or may not be over-ridden based on the master related activities (such as
create , change , display)
TRUE
FALSE
FALSE
FALSE
TRUE
FALSE
22 Detailed Postings involving Sundry Debtors, Sundry Creditors and Fixed Assets update
the respective subledgers but also update the corresponding reconciliation accounts
in the General Ledger
TRUE
23 A Chart of Accounts may be created in one step or two steps or may even be copied in full
from another chart of accounts
TRUE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
27 You have created a company code as resident in India and while doing so you have
configured your currency with Indian Rupee (INR).
Your company code owns an apartment in London which has been rented out to a
British National from whom you would be collecting monthly rent.
Your accountant has created a GL Master record named "RENT RECEIVED-LONDON
APARTMENT" toward collection of monthly rent.
a. Your accountant has mastered the GL account with INR as the account currency and
receipt of rent cannot be documented as it is if your tenant pays a check for 2000 Pounds
(GBP).
FALSE
b. Your accountant has mastered the GL account with GBP as the account currency and yet
he can continue to receive a check for Rs.14000 and document it as it is while posting
FALSE
c. Your accountant has mastered the GL account with Indian Rupee (INR) as the account
currency and therefore you must insist on receiving rent in INR only
FALSE
d. Your accountant has mastered the GL account with Indian Rupee (INR) as the account
currency and yet you can use this GL account for receiving a check for 234 Euros and
account as it is.
TRUE
e. Your accountant has mastered the GL account with Pounds (GBP) as the account
currency and yet you can use this GL account for receiving a check in 12000 Euros
FALSE
a. A customer account has a general data segment, company code segment and chart of
accounts segment
FALSE
b. A vendor account has a general data segment, company code segment and chart of
accounts segment
FALSE
c. A customer account has a general data segment, company code segment and sales area
segment
TRUE
d. A vendor account has a general data segment, company code segment and sales area
segment
FALSE
e. A vendor account has a general data segment, company code segment and
purchase organisation segment
TRUE
29 One time Customer or One time Customer is a special Account Group used for
accomodating customers / vendors with whom who do business very rarely
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
32 Customers and Vendors are entities with whom your company code transacts business.
Therefore, customer numbers and vendor numbers are always assigned at company code
level for the exclusive use of your company code
FALSE
33 Field Status for customer and vendor masters are maintained just the same way as you do
for GL Master Accounts. It cannot ever be any different.
FALSE
FALSE
b. Clearing with Customer (in vendor master record) and vice versa has to be activated
in the Payments related section of your Company Code
TRUE
c. Customer Number has to be indicated in the vendor master record and vice versa in
at client level
TRUE
d. Clearing with Customer (in vendor master record) and vice versa has to be activated
at client level
FALSE
TRUE
FALSE
Let us suppose that your company code treats one customer as Head Office and
a few other customers as its branches and your consultant has configured the master
records accordingly
a . Invoice items posted to branches are transferred to the Head office account for control
purposes
TRUE
FALSE
c. The said configuration may not invoke Centralized processing of related documents
TRUE
d. Payment of such invoices is always accounted using the master record which is
earmarked as Head Office
e. Payment of such invoices need not be accounted using the master record which is
earmarked as Head Office
FALSE
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
38 IBAN stands for international bank account number (not exceeding 34 characters long)
cannot be mastered without explicit information and approval from your customer
TRUE
39 IBAN reference is not captured in the Company Code segment of your customer / Vendor
Master
TRUE
a. You need to create two General Ledger Accounts for YES BANK, one for your bank
account and another for that of your customer
FALSE
b.
c.
d.
e.
FALSE
TRUE
FALSE
TRUE
You do not need to create any GL account if your Bank master stands updated
Your Bank Key/ Bank Number and that of your customer would be the same
Your Bank Account Number and that of your customer would be the same
Your Bank Account Number would be different from that of your customer
TRUE
TRUE
TRUE
TRUE
42 A House bank is the bank in which your company code has an account for operating
TRUE
43 A Bank which you have configured as your house bank can never be configured by your
vendor as his / her house bank
FALSE
44 Your House Bank is not only currency specific but is also country specific
TRUE
FALSE
46 Every House Bank must have a corresponding GL Account with one to one mapping and
that too currency specifically
TRUE
47 The GL Account which is a representative of your house bank is not incompletely mapped
if the Account ID is not furnished in the said GL Master record
FALSE
48 Every combination of House Bank with its Account ID must be mapped to a General
Ledger
Master Record and vice versa
TRUE
49 A House bank mapped to multiple unique account IDs is not possible in SAP
FALSE
TRUE
TFIN50_PART 1_Unit 03
Q.No.
Question
Answers
FALSE
FALSE
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
j. Posting Keys may have a say in determining field status during document posting
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
8 A document type
a. Never allows document posting using the net procedure
FALSE
b. Is flexible to make the field status of Document Header and / Reference fields as
Required
TRUE
TRUE
FALSE
TRUE
FALSE
10 You can create customizable Document Types and Posting Keys for the exclusive use of
your company code related transactions only
FALSE
a. A Given Document Number Range can be used by one or more document types
TRUE
b. A Given Document Type can use more than one Document Number Range
FALSE
c. Different Company Codes using the same document type can thwart the document
principle
since the same document number would be used in each company code
d. Different Company Codes using the same document type do not thwart the document
principle
though the same document number would be assigned to a document in each
company code
12 Pick out the correct statements from the following:
a. A Posting Key is always permits one Account Type only
b. A Posting Key may be mapped to more than Account Type
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
d. Is not necessary at the transaction level if Field Status Group has been defined in
the related GL Master Record
FALSE
14 Since Customer and Vendor records are described in detail through the subledgers
a. You do not have to create any GL Master Record for customers and vendors
b. You have to create GL Master Records to represent your customers and vendors
FALSE
TRUE
15 You have created Expenses Account Group' with Suppress as the field status for the
field SORT KEY. Your Sub-ordinate , who is entrusted with the task of creating GL
Master records for Expenses sets the field status of the field SORT KEY as Required
while mastering an Expense under the aforesaid Account Group.
The system suppresses the sort key field using the SDRO Rule
FALSE
16 Many Field Status Groups (bundling sets of statuses of every field) are put together in a
Field Status Variant which is assigned to your company code. This is a clear
representative of the
variant principle used in SAP
TRUE
17 Assigning a Fiscal Year Variant not only determines the posting periods for your
company code but also automatically opens / closes the posting periods based on the CPU
Date
FALSE
18 You have created many Customers and Vendors in the respective Subledgers. You don't
set Field Status in subledger directly
TRUE
19 A Posting Period variant created by you can also be used by any other company code
TRUE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
FALSE
d. Any Company Code which uses a given posting period cannot open/ close posting
periods
without impacting other company codes which are assigned to the same posting period
variant
TRUE
22 Two period intervals must remain open if you have to do accounts closing
TRUE
23 Document Date entered during posting determines the posting period for updating
accounts
FALSE
24 You may place restrictions on the maximum amounts ( of documents , open line items,
discounts and payment differences ) by creating suitable authorization groups tied up to
the users
TRUE
FALSE
TRUE
c. Authorization groups may be created currency specifically for a given company code
FALSE
26 You always use a document type to post a transaction in Standard SAP. There is no
alternative
to this
TRUE
27 Document Posting is possible if the total debit value does not match the total credit
value in the document.
FALSE
b. Customer Credit Memo using document type KG of which one line item represents the
customer and the other being a material / GL / Asset Account
FALSE
c. Vendor Payment using document type KZ of which one line item represents the
vendor and the other being a material / GL / Asset Account
TRUE
d. Pure GL Document using document Type SA wherein no line items usually represent
a
customer or a vendor
e. During document posting there may be line items using master records with open item
management and there may also be line items without it
TRUE
TRUE
TRUE
TRUE
a . Customer and Vendor related payment documents have a push button for
selecting open items against which payment could be adjusted
TRUE
TRUE
TRUE
FALSE
e. Fields such as reference, header text and line item text are available to enter textual
data which
may be printed (by prefixing with a * while entering data in the document)
TRUE
31 You have separate provisions / menu options to view held documents , select
screen variants, post, park or delete documents
TRUE
Question
1 Default values in SAP
a. Indicate Reusable data inputs which are keyed in by the end-users
b. Indicate Data which is stored for repeated use to reduce labor for end-users
apart from reducing data entry errors
2 Ensure the validity of the following statements
a. Fiscal Year can be proposed as a default value
b. Value Date can be proposed as a default value
c. A ceiling in the exchange rate differerence when document posting in foreign
currency occurs
d. All the above statements do not happen at client level
Answers
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
4 Editing options during Document entry and /document display can help
end users to set their own default values on many aspects
TRUE
FALSE
6 Parameter IDs can set a default value for Company Code, Currency etc. which appear
automatically during document posting
TRUE
7 The system cannot allow posting of a document when debit and credit values do not
TRUE
8 When you use document type KR, you would automatically see posting key 31
defaulting in
TRUE
9 Address details of Customer and Payment Terms defaulting during document posting
indicates
default value based on Account Master Records
TRUE
FALSE
FALSE
TRUE
TRUE
FALSE
FALSE
12 The end user wants a document change rule permitting changes to some fields only with
regard to customer related line items. However, he does not want the same fields to
undergo
a change in GL related line items.
SAP cannot allow different types of change rules for different Account types
FALSE
13 Document Change Rule specified based on transaction classes allow field changes to
some unique transactions
(known as Special GL related Transactions)
TRUE
14 The following items may, optionally , play a role in framing document change rules
a. Posting Period
b. Status of Line Item
c. Purchase Return / Sales Return
d. Customer Debit / Vendor Credit related line item
e. Credit memos relating to downpayment
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
20 You accounted a vendor invoice for 150 EUROS three months ago pertaining to a
purchase
made from Vendor "ABC Ltd. ". However, on the same day you had accounted another
vendor invoice in the Account of the vendor "XYZ Ltd." for a value of 150 Euros.
Despite your instruction to settle the liability to ABC Ltd., your accounting clerk
cleared,
rather erroneously, the liability to XYZ Ltd.
Fortunately, the mistake was identified even before despatching the related documents
from your organization.
Now the question is :
FALSE
21 You can reverse a single incorrect document; optionally, you may also reverse many
incorrect documents in a single step
TRUE
22 Negative reversals apply to Customer and Vendor related documents only. They cannot
be
FALSE
FALSE
24 The reversal document reference can be verified from the incorrect document which
stands reversed.
TRUE
25 Terms of Payment are entered in the Company code section / Purchase Org. segment/
Sales
area segment of the business partner master record. Payment terms are always created
at client level
TRUE
26 Pick out the correct statements from those given below:
a. Base line date in a term of payment need not necessarily be one of the following
(namely i. document date ii. posting date iii. entry date iv. No default)
b. A term of payment created for a customer may or may not be used for a vendor
c. Terms of payment in the business partners' master records are always entered from
financials only
d. Cash discounts applicable, if any, are entered in a separate Cash discounts Master
and
TRUE
TRUE
FALSE
FALSE
27 Credit memos, by default, use the payment term 0001 even if you enter a different term
of
FALSE
TRUE
29 Use of daylimit in a payment term key prepares the same payment term key to store
multi-part payterms
TRUE
30 A payment block defined in a term of payment applies to all business partner accounts
using the said payment term
TRUE
31 A term of payment with which a business partner has been mastered cannot be
overridden
FALSE
32 Payment block and / payment method defined in a term of payment which is referred to
in your business partner's master record affects , by default, all line items of the partner
which are created subsequently
TRUE
33 Saving a term of payment creates a literal text which can be overwritten for display and/
printing purposes
TRUE
34 Creation of a term of payment with the baseline date falling after the due date is
a. possible in SAP
b. impossible in SAP
FALSE
TRUE
TRUE
36 During document change at line item level ( involving a customer and / vendor) all
parameters relating to terms of payment are editable
TRUE
37 Clearing accounts used in place of cash discount in net procedure uses open item
management
TRUE
38 Expense and Revenue accounts are used to quantify cash discounts in Gross procedure
TRUE
TRUE
FALSE
FALSE
TRUE
40 Tax procedures are country-specific and are indirectly assigned to your company code
TRUE
TRUE
42 Account key / Transaction key determines which General Ledger Accounts for Tax
need
TRUE
43 Order of the steps cannot be defined by you in IMG for computation of Tax
FALSE
44 Interest Tab of every General Ledger Master Record contains details as to whether
a. it is a tax account (input or output tax) or b. whether the GL account attracts tax or
TRUE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
47 When two company codes are involved in a cross company code transaction,
the number of documents generated upon posting the transaction would be
a. one only
b. two only
c. three only
d. none
FALSE
FALSE
TRUE
FALSE
48 Clearing Accounts created for faciliating cross company code transaction must always
be General Ledger accounts using posting keys 40 and 50
FALSE
49 Two Company codes not forming part of a company will not be eligible participants in
a cross company code transaction
TRUE
FALSE
51 Pro-rata Tax apportionment in a cross company code transaction does not happen
during
TRUE
TRUE
Question
1 Clearing is a process
a. Of creating open items
b. Of settling open items
c. Which can never be to line items involving Business partners
d. Which includes all the above options
ANSWERS
FALSE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
6 The document created by the system upon clearing is called a clearing document
TRUE
FALSE
TRUE
TRUE
The clearing document reference along with clearing date is mapped in the
cleared documents
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
Sort Key is capaple of concatenating data from four fields (subject to a maximum
of
14
18 characterlength) which is helpful in tracing documents across submodules
TRUE
15
Every clearing document uses the document principle and therefore must contain
a minimum of 2 line items and a maxi,mum of 999 line items
FALSE
16
A Purchase Return knocked off against the related purchase and cleared is not
considered as Post with clearing
TRUE
TRUE
Let us suppose that your customer owes you a sum of USD13500 ( break up :
five open
invoices of 1500,500,7500,2500,1500 respectively). The customer settles part of
his / her
dues by sending a check for USD 3000.
18
You may settle the amount received by clearing off either the two invoices for
USD 1500 and 1500 ;
alternatively, you may clear two invoices which are for USD 500 and 2500
(usually done with the concurrence of your customer).
TRUE
The Open items Push button helps you select the related invoices for clearing.
In selecting open items for manual clearing, the system offers you many
additional selection options (such as amounts, document numbers, posting
19 date,age of the document, automatic search and selection by the system).
However, you may override these options and select the open items yourself.
TRUE
FALSE
The system uses the Posting date for account updation , if and only if the posting
21 date
is not the same as that of the document date
FALSE
TRUE
The system offers other options such as selection of Account Type, other
23 accounts, payment
advice notes etc for selecting open items while effecting manual clearing
TRUE
Amounts not assigned signifies line items which can be cleared manually through
post
24
with clearing
FALSE
Cash discounts defaulting from the business partner master record / document
line item
25 are neither editable during manual post with clearing nor do tolerances apply
during
manual post with clearing process
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
26
27
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
a. The invoice is partly cleared ( viz. for 700 euros.) and the same invoice
document
now is shown as an open item for 300 Euros
b. The invoice is fully cleared ( viz. for 1000 euros) and a new line item with a
clearing
document reference is generated as an open item for 300 euros
c. the invoice line item stands uncleared ( viz. 1000 euros.) and a payment
document
which is also open is created for 300 euros
d. SAP never allows a payment document which does not match an invoice
amount in full
FALSE
FALSE
TRUE
FALSE
Residual Payment always clears an open item in full and creates a new open line
33 item for
the net due still owed
TRUE
Configuration of Terms of Payment, Cash discount and dunning key etc can be
34 specified in customer / vendor tolerance so that they take priority over default
configurations
TRUE
Reason codes for Partial / Residual / Differerence Payments which are disputed
35 can be configured to automatically create related correspondence to customers /
vendors
TRUE
TRUE
TRUE
38
FALSE
TRUE
TRUE
FALSE
TFIN 50_PART1_UNIT 06
Q.No.
Question
A Cash Journal is a tool in SAP which facilitates posting of Cash receipts and
Cash Payments
ANSWERS
TRUE
TRUE
b. Cash journal can accommodate General Ledger, Customer and Vendor related
cash transactions
TRUE
FALSE
FALSE
A Cash journal is mapped to a General Ledger account on 1:1 basis the GL Account
3 must be configured to accept automatic postings based on posting made in the related
Cash Journal
TRUE
A Cash journal is set up , by default, with document types AB, DZ and KZ to facilitate
Cash Receipts and Cash Payments relating to GL Accounts, Customers and Vendors
TRUE
FALSE
You cannot define your own business transaction categories other than the pre-defined
ones
TRUE
7 You can create your own business transactions for a cash journal
TRUE
Taxes relating to Expenses and Revenue arising in a cash journal can be explicitly
defined. If
8 no such tax code is defined for such business transaction then tax codes cannot be
used for
such business transactions during document posting
FALSE
TRUE
10
TRUE
11
Document Numbers assigned to every transction in the Cash journal arise from the
number range(s) defined for the document types AB,DZ and KZ
FALSE
TRUE
TRUE
Every Cash journal sub-ledger is represented in the General Ledger using the same
currency
14
mentioned in the sub ledger and the GL Account is configured as a reconciliation
account
FALSE
A follow on document is created for every cash journal transaction posted in the sub
ledger
16 Pick the correct statement
a. A Cash journal transaction saved in the sub ledger can never be deleted
15
TRUE
FALSE
b. A Cash journal transaction saved in the sub ledger and posted can be deleted
FALSE
TRUE
FALSE
A Cash journal document can be split into multi line items , each of them being
assigned
17
to a different General Ledger and / a different tax code and yet be posted to the
GL with a single document number
TRUE
Though cash journals permit cash receipts and payments involving customers and
vendors, such a customer and / vendor can never belong to a one time customer /
18
vendor
account group
FALSE
It is possible to identify the GL document number from the cash journal subledger
19 document
posted
TRUE
TRUE
Question
1 Management of Payables ( viz. Settlement of commitment to vendors through payment)
can be carried out
a. Manually
b. Automatically using the Automatic Payment Program
ANSWERS
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
TRUE
TRUE
6 Vendor liabilities of multiple company codes residing in a country can be paid using
a single APP run
TRUE
TRUE
FALSE
8 Let us assume that your company code is an Indian Company Code. However, your
procurement is always from vendors in the United States of America. Your configuration
of
payment methods in APP
a. Must relate to payment methods adopted in India only
b. Must relate to payment methods adopted in USA only
c. can relate to payment methods adopted in India as well as in the USA
d. Payment method configuration is not mandatory to execute APP
9 APP cannot be run for customers as it is primarily used for vendor payments
10 Pick out the correct statements from the following:
a. Country specific payment methods form a sub set of company code payment methods
b. Company code payment methods form a sub set of country specific payment methods
TRUE
FALSE
FALSE
FALSE
FALSE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
a. Bank postings and vendor postings should always occur in a single company code
b. Bank postings and vendor postings need not always occur in a single company code
14 SAP allows cross company code payments to be carried out through APP. However,
manual payments involving cross company code payments is not possible.
FALSE
TRUE
FALSE
15 You can configure payment tolerance days, discount settings , definition of company
code(s) ,
types of payments allowed and payment method supplements involved in APP. All
company
codes area is the ideal place for configuring them
TRUE
16 Details such as minimum amount specifications, BOE specifications, EDI Forms. Texts
etc. are
always client-specific
FALSE
17 You have initiated purchases from a new vendor XYZ Enterprises. However, your
payables
clerk was not too sure of the vendor's address and therefore left the related fields blank
(for
subsequent updation upon getting relevant details). You have, in your country specific
APP configuration settings, activated checkboxes relating to all vendors' location details.
Your vendor acknowledges receipt of a check payment made to him through APP
18 Country specific payment method settings include details such as document types used
during APP run, permitted currencies and payment programs associated with APP
FALSE
TRUE
19 A blank in permitted currencies section in settings for country specific payment methods
in APP
indicates
a. APP cannot be executed successfully for want of currency specification
b. APP can be executed successfully
FALSE
TRUE
20 Amount specifications (minimum and maximum) to be considered in APP can vary from
company code to company code
TRUE
21 Various grouping and optimization settings for APP can be configured company code
specifically
TRUE
22 Details such as foreign business partners, their house banks and foreign currencies can
be
accomodated in APP
TRUE
FALSE
26 You have created a vendor master without specifying House bank details. However, your
APP configuration contains House Bank details. The vendor can never be paid through
APP
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
TRUE
29 Payment Blocks
a. can never be set in documents and line items
b. can never be set in vendor master
c. may or may not be manually removed
d. none of the above options is true
FALSE
FALSE
TRUE
FALSE
TRUE
FALSE
FALSE
FALSE
31 After running APP payment run, you do not have to run another program for making
automatic
GL postings to cash discounts, tax accounts and realized exchange rate gains and losses
TRUE
32 After an APP run, Header of the related payment and cleared documents get populated
with APP ID and Run date reference
TRUE
FALSE
34 Each Country-specific payment method has a print program and a minimum of one
variant assigned
TRUE
35 The function of the print program is to transfer the payment media, advice notes and
summary to
print administration, DME Payment to DME administration and create Idocs for EDI sub
system
TRUE
36 Payment medium forms can be assigned to company code or to payment methods used
by
your company code
TRUE
37 If you use DME, you cannot send the payment medium to the vendor
TRUE
38 You must carry out a debit balance check before creating the APP payment proposal
39 Any incoming payment without a payment method is taken up for adjustment against
payables
upon running the debit balance check program
FALSE
TRUE
The following reason(s) can throw an exception list when you execute APP
a. Incorrect / Incomplete / Absence of details of House bank
b. Payment Block in vendor master / document line item(s)
c. Debit Balance in vendor's account , especially after running debit balance check
d. Absence of / Incorrect / Incomplete /Payment method(s) in vendor master and (or)
line item
e. APP Run identification details not mentioned in Business Partner's master record
f. Vendor's address details configured in APP but missing in Vendor Master
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
41 Automating the APP process requires selection variables to take care of time dependent
parameters to run the program periodically and may be scheduled
TRUE
TFIN50_PART 2_UNIT 03
Q.No.
Question
1 Dunning is a process which
a. Creates an accounting document and affects the financial statements
b. Does not create an accounting document but affects the financial statements
c. Creates an accounting document but does not affect the financial statements
d. Does not create an accounting document and does not affect the financial statements
Answers
FALSE
FALSE
FALSE
TRUE
2 Dunning
a. consists of dunning procedures already pre-defined which stand automatically assigned
to your
business partners' accounts.
b. is a process in which SAP allows flexibility to users in letting them create dunning
procedures
that are automatically assigned to your business partners' accounts
c. always consists of a SAP pre-delivered dunning procedure assigned
explicitly by the user to the business partner's master record for it to happen
d. consists of the use of a SAP pre-delivered / user-created procedure
to be assigned explicitly to the business partner's master record for dunning to happen
FALSE
FALSE
FALSE
TRUE
a. You set parameters,edit the proposal schedule , payment run and print dunning notices
FALSE
c. You schedule a dunning run, edit the proposal and parameters for printing dunning
notices
d. You set parameters, accept or edit the proposal, schedule payment run and print
payment media
FALSE
FALSE
4 Dunning relates to reminding about receiveables which are overdue. Therefore, dunning
applies to customers only
FALSE
7 You have defined a dunning procedure which has a dunning interval of 7 days ( viz.
weekly
dunning). Manipulation of authorization groups and / tolerance limits can help you
override
this limitation thereby allowing you exceptionally to dun accounts (using this procedure)
on daily basis also
FALSE
FALSE
TRUE
TRUE
FALSE
9 Line item grace days is a one time option , if configured, pushes off the dunning date
a. at the first dunning level
b. at the last dunning level (assuming that the dunning levels is more than one)
TRUE
FALSE
FALSE
TRUE
11 An account is dunned , if and only if , all the overdue line items in the account are well
past
the minimum days in arrears configured in the dunning procedure
FALSE
FALSE
TRUE
13 At every dunning level in a dunning procedure, you can set payment deadlines and /
opt to print detailed dunning list of all items in the account
TRUE
14 You may or may not continue to print dunning notice in a legal procedure wherein the
account balance has not changed thereafter
TRUE
15 Your dunning procedure may include currency specific dunning charges that can be
printed
in dunning notices. Limits could be set for each dunning level. However, the dunning
charges limit for each level can be configured as a percentage on the dunned amount
OR as a flat amount
TRUE
17 If you have configured a minimum percentage and a flat amount as minimum for each
dunning level, then
a. dunning can happen if the lower of the two conditions is complied with
b. if both conditions are satisfied
FALSE
TRUE
18 The severity of dunning text content usually increases with increase in dunning levels. The
texts may be customized using the Text Tab of the dunning procedure
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
21 Account Selection, Dunning line items and Dunning Accounts are the three basic
steps and in that order required for dunning to be carried out
TRUE
22 Adjusting Debit line items against credit line items during dunning , either within an
account or
across items between customers who are also vendors and clearing sought between them,
happens on FIFO basis ( viz. oldest debits knocked off against oldest credits)
TRUE
23 Dunning a customer account after considering a vendor account (viz. customer=vendor and
clearing sought) cannot proceed if both the accounts have not been configured with same
dunning procedure
TRUE
FALSE
TRUE
25 Line items with an incoming payment method but with a payment block
a. are dunned
b. are not dunned
TRUE
FALSE
26 The dunning level of the original invoice has no relevance in an invoice related credit
memo
FALSE
FALSE
FALSE
TRUE
FALSE
28 Dunning of cleared items can be carried out exceptionally by customizing the dunning
procedure
FALSE
29 Dunning notices can be printed after dunning details are updated in the master and
documents
FALSE
TRUE
TRUE
31 Editing a Dunning Proposal impacts the Accounts and (or) Line items selected in the
proposal for such dunning
TRUE
32 Changes to line items / master records relating to dunning impacts the dunning run
covered by
dunning proposal which is pending conversion into dunning notices
FALSE
TRUE
TRUE
TRUE
Question
1 Correspondence can be triggered
a. Automatically by configuring customer/vendor master records
b. Online while processing manual payments
c. During Document creation
d. Dusing document / balance / line item display
ANSWERS
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
14 When a check is generated, the check related details are populated in the Paid
document
and payment document
TRUE
15 Reason Code(s) are used to void checks which are not to be released
TRUE
16 You may reverse a check and the payment document if the payment document is
incorrect
TRUE
17 You may reverse a check but not the payment document if the payment
document is incorrect
FALSE
18 You may reverse a check, the payment document and the paid document in one
go
FALSE
19 Reversing the check does not always go hand in hand with the process of
reversing the
payment document
TRUE
TRUE
21 Check register is a place where you can see the status of each check used and /
voided
TRUE
22 You need not reset if you need to reverse the check and the payment document
FALSE
TRUE
24 You are dependent on file information received from your bank if you use the
lockbox function
TRUE
25 Your customer's liability is absolved upon receipt of payment from him/her into
your house bank's lockbox
FALSE
FALSE
TRUE
TRUE
FALSE
FC VALUATION AND
ACCRUALS & DEFERRALS
Q.No.
Question
ANSWERS
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
You are not prevented from creating multiple financial statement versions
for reporting the same data
TRUE
TRUE
FALSE
4 Financial statement versions can create drilldown lists, detailed lists and structured lists
TRUE
You can determine the hierarchy of GL account listing and may also refrain from
assigning some GL accounts from reporting
TRUE
TRUE
TRUE
9 Balance of a GL account
a. is reportable selectively (i.e. debit only or credit only)
b. is reportable unmindful of whether it is debit or credit
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
10
Revenue and Expense Accounts are carried forward to a new fiscal year using the
Balance carry forward program
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
15
Foreign currency valuation should not be performed on cleared business partner related
items
17
TRUE
TRUE
A valuation method adopted for FC Valuation allows you to select one of the valuation
procedure defiined in it. The procedures are
a. lowest value
b. strict lowest value
c. always valuate
e. revalue only
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
20 Exchange Rate type used for FC Valuation is freely definable by the user
TRUE
Individual Value Adjustment for Customer dues can be done with or without using
21 Special
GL indicator "E"
TRUE
Account determination for IVA adjustment involves the creation of an Expense account
22 or
a Balance Sheet Adjustment Account
FALSE
TRUE
24
The IVA value arising out of a valuation run during year end is usally reversed on the
first day of the next fiscal year
TRUE
25
A detailed log report furnishes dataset pertaining to IVA adjustment made using a
valuation run is possible.
TRUE
Receivables and Payables are regrouped to separate default customer balances from
26 non
default balances (i.e. vendorlike customer balances)
TRUE
FALSE
TRUE
FALSE
TRUE
29
SAP reports are always pre-delivered and you can never create your own report
structures
31
FALSE
32
You use the trading partner field for regrouping all open items of customers who are
also vendors
TRUE
A Reconciliation ledger helps to sort out differences between FI and CO which uses
33 intermediary
clearing accounts managed on open item basis if you are using classical G L
TRUE
TRUE
TRUE
FALSE
37
Accrual engine is a tool for performing automated accruals which employs user-defined
application components
FALSE
38
An Accrual involves a.creation of an accrual object and the start of a periodic run or
reversal run
TRUE
40
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
45
Every accrual in the engine requires definition of a frequency and the level of
summarization
TRUE
46
Balance audit trail , as required, is maintained historically based on posting dates and
periods
TRUE
47
Open item balance audit trail is an audit trail which uses reconciliation account(s)
regarding open items/cleared items
TRUE
ASSET ACCOUNTING
Qstn.No.
Question
1 Asset Accounting Component in SAP uses a Chart of Depreciation
which
a. can be copied from an existing Chart of Depreciation
b. can be created from scratch without using Copy method
ANSWERS
TRUE
FALSE
2 A Chart of Depreciation is
a. Industry Specific
b. Country Specific
c. Both Country Specific and Industry Specific
d. none of the above
FALSE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
d. Company code level so that only one company code can use them
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
10 Asset Classes help you in structuring Fixed Assets. Each Asset Class
comprises a Master Data Section and
a Valuation Section
TRUE
TRUE
12 An Asset Class
a. Helps in the creation of Asset Master Records
b. Responsible for Asset Master Numbering
c. Controls the design and screen lay out relating to Assets
d. Serves a bridge between the Chart of Accounts and Chart of
Depreciation using Account Determination
e. groups assets of a similar kind
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
b. Sub number Level is the most rigid level (allowing minimal changes to
data) and Asset Class level
is the least rigid level permitting maximum flexibility to change data
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
26 A Valuated Goods Receipt posts asset values upon receipt of the asset
whereas a non-valuated Goods Receipt posts values upon receipt of
Vendor Invoice
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TFIN52_UNITS 06,07&08
Q.No.
Question
1 Reports in SAP can be accessed from the node Information Systems
a. There are three separate nodes available in each area, one for GL, one for AR and one
for AP.
b. Reports relating to GL, AR and AP can be accessed from the information system
folder
or by navigating via System>Services> Reporting and furnishing a Report name for
execution
2
Each report in SAP has a name and the user can access the report by specifying the
report name
ANSWERS
TRUE
TRUE
TRUE
TRUE
FALSE
Reporting can be for single value or a range comprising more values. However,
4 exclusion
of a single value / a range of values in a report is not possible
FALSE
5 Sorting and / Summarization options are available with each report generated
TRUE
TRUE
b. do not support multiple and / range(s) related criteria for one or more report (s)
7 Selection variants
a. Must be used for reporting by default
b. May be used over and above the default features using reusable parameters in a
report
8 Pick the correct statement(s)
a.TVARV relates to table variables which can be defined by users for reusable
parameters
b. Dynamic date selection relates to date related variables which must be selected by
users for
reusable parameters
9 Dynamic date selection datasets can be
a. created by users
b. are always selected from SAP pre-defined sets
10 Abap List Viewer Reports allow users to
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
a.
b.
c.
d.
e.
TRUE
TRUE
TRUE
TRUE
TRUE
11 ALV Classical list is designed for Internet viewing and Gridlist is for Printing
FALSE
12 Use of parameter Ids and / saved Layouts use pre-designed reports for re-use,by default
TRUE
13 Use of Worlists (OB55) do not help you activate / deactivate fields as desired by you
FALSE
14 While there are pre-defined reports in SAP, you can also design your own reports
TRUE
Let us suppose you are viewing customer / vendor line items.Apart from viewing usual
open/cleared/all items
a. you may view noted items and / Spl.GL items
b. you may view customer and vendor line items in a single screen
c. you may view parked and held items though they do not update the GL
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
17 Status of each line item can be identified through colored iconic symbols
TRUE
TRUE
TRUE
FALSE
FALSE
20
User specific report lay outs created for reports are named by prefixing with a forward
slash
TRUE
FALSE
21 SAP uses thirdparty software for supporting the creation of drilldown lists
FALSE
TRUE
23 A Characteristic along with a characteristic value qualifies as an object fit for reporting
TRUE
Balance display, Line item display and Keyfigure reports are the various reporting
24 options
available in SAP
TRUE
Quantities and Values in SAP are characteristic values while keyfigures are formulas
25 generated
using quantities and values
FALSE
26
Detailed report furnishes dataset pertaining to an object whereas drilldown report may
show information on multiple objects
TRUE
27
FALSE
The options available in SAP are the ability to generate a. One Axis (with or without
28 keyfigure)
and b. Matrix reports (also known as two axis reports)
29
SAP reports are always pre-delivered and you can never create your own report
structures
TRUE
FALSE
TFIN52_UNIT 09
Q.No.
Question
Customer and Vendor Accounts are handled in detail (line itemwise) using sub
ledgers.
1
However, a summarized balance of all such transactions stands posted from the
sub ledgers into specialized general ledger accounts known as reconciliation accounts
ANSWERS
TRUE
FALSE
TRUE
a. D - Sundry Debtors
b. K - Sundry Creditors
c. C - Current Assets ( involving Cash, Bank and inventories)
d. A - Fixed Assets
e. V - Contracts
f. S - Any General Ledger Account (affecting the P & L account)
g. + - All Account which can be defined in SAP
h. None of the above
TRUE
TRUE
FALSE
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
FALSE
e. created can never be an asset / liability as they are Expense / Revenue Accounts
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
a. Noted items are special GL items which update your profit and loss account only
b. Automatic offsetting entries can be called as statistical items
c. Noted items do not follow double entry principle and therefore do not carry
accounting significance; instead, they are used user-friendly reminders which do
not
update your General ledger
d. Free offsetting entries impact customer/ vendor balances and affect your
Cash and / Bank Balances
e. Automatic offsetting entries follow double entry but do not update GL balances
12 Special GL transactions which appear as requests are
a. statistical entries
b. noted items
c. free offsetting entries
d. all the above
e. none of the above
Special GL transactions such as Guarantees etc. have no accounting impact (despite
13 using
double entry principle) and are called automatic offsetting entries
14 A typical example of free offsetting entry, impacting accounts, would be
a. Down Payment Requests and / Bills of Exchange Requests
b. Down Payments Made and / Down payments Received
One of the default values in SAP is Zero Balance Check made by the system. In
other words, a document cannot be posted until and unless the debit and credit
amounts
15
entered in the document match and the net difference is Zero.
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
FALSE
Customer and / Vendor Line items which are noted items, like held documents ,
16 cannot
be viewed since noted items are single entry items
FALSE
You would have observed that Customer and / Vendor Reconciliation Accounts do
17 not have line item display. Alternative Reconciliation Accounts follow the same
principle.
FALSE
18
Noted items and Statistical items can be viewed as line items. However, there is no
way in which you can see transaction figures for such items.
TRUE
FALSE
b. Book Down Payment, Generate Down payment Request, Post the Invoice,
Clear the down payment and finally clear the down payment request using account
clearing
FALSE
c. Generate Down Payment Request, Book Down Payment, Clear Down Payment,
Book Invoice and finally do an account clearing
FALSE
d. Generate Down payment Request, Book Down Payment, Book the Invoice, Clear
Down Payment and finally clear the invoice through account clearing
TRUE
FALSE
TRUE
TRUE
IVA is created by debiting an Expense Account (for IVA) and crediting a Liability
Account ( which serves as an alternative reconciliation account). If the provision is
not
required, it may be reversed subsequently. On the other hand, if the provisioned
22
liability
turns out to be bad then you could reverse the customer due (using the regular
reconciliation
account) by charging off to an expense account meant for write off of bad debts.
TRUE
Guarantee related Special GL Transactions use a special GL Indicator "G". The initial
entry
is made debiting guarantee account and crediting a liability account ( a clearing
23
account) and
the entry is reversed when the guarantee stands settled / guarantee is no longer
required.
TRUE
When you use Bills Receivable ( with Special GL Indicator "W"), you transfer the
balance
24
from alternative reconciliation account to normal reconciliation account and knock off
the collection on the due date against this reconciliation account
FALSE
26
27
28
a. SAP uses posting keys 01,11,21 and 31 for denoting customer and / vendor related
special GL Transactions
FALSE
b. SAP uses posting keys 09,19,29 and 39 for denoting customer and / vendor related
special GL Transactions
TRUE
Use of Special GL Indicator is not necessary if you use posting keys which are
earmarked exclusively for handling Special GL Transactions
FALSE
Sort Keys, Line item display and Field Status Group G031 are configured for
alternative reconciliation accounts created for down payments
Special GL Indicators are one character identifiers each of which denotes a specific
29 kind
of Special GL Transaction.
30
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
33 Configuring the Check box "Noted items" ensure that Accounts are updated
FALSE
34
Credit Limit Check can be configured for Customers. However, this does not apply to
noted items
TRUE
35
TRUE
TRUE
HOLD/PARK DOCUMENTS
Q.No.
Question
1 Incomplete documents in SAP can be
a. Held
b. Parked
Answers
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
TRUE
A parked document is assigned Z status by the system upon deletion and the
4 document
number is lost for ever
TRUE
When you view a parked document which was deleted you find that it contains
5 those line items
which were entered prior to parking
FALSE
You are aware that many fields such as amount,GL Account etc. are not
6 changeable.
However, these change rules do not apply while parking documents.
TRUE
Fields such as Currency, Document Number, Company code etc. are subsequently
editable with respect to documents which are already parked
FALSE
TRUE
Let us assume that a document was parked during January 2009. Subsequently the
posting
9
period 01 of fiscal year 2009 ( company code uses calendar year as fiscal year) was
closed. The parked document cannot be posted and hence has to be deleted
FALSE
TRUE
TRUE
Documents are parked in real time by the user who enters the document which may
be posted/
11 deleted by another user who is empowered to authorize. Therefore, parking
documents offer
better internal check control through dual /multi level control.
TRUE
Substitution rules do not apply to parked documents whereas such rules can be used
12 in
while posting regular documents
TRUE
FALSE
The system assigns a different number while you post a parked document thereby
14 discarding
the earlier number assigned to such document during document parking
FALSE
A Workflow defines details of tasks and the sequence in which they have to be
carried out
15
apart from specifying the users who are authorized designatories and other similar
things
TRUE
A Work flow can be defined as a variant which is one of the global parameters
and can be assigned to company codes
TRUE
TRUE
16
Answers
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
3 User Interface Screen for Data Entry/ Posting in the New General Ledger has
undergone a radical change as
compared to its earlier counterpart in the Classic General Ledger
FALSE
4 New General Ledger does not contain functions of the Special Ledger
FALSE
TRUE
FALSE
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
12 Scenarios define the additional fields which get populated with values while posting a
transaction using
New General Ledger
TRUE
13 The following Scenarios have been defined and pre-delivered by SAP from which you
may select one or more
a. Cost Center Update
b. Profit Center Update
c. Business Area Update
d. Segment Update
e. Functional Area Update
f. Consolidation Update
g. Credit Control Area Update
h. Asset Master Update
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
14 Scenario Assignment is customizable ( that is , you can form your own scenarios for
additional customized reporting )
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
20 A document Split can be viewed with split up details of line items by accessing the
document in the Sub Ledger
using Tcodes FBL1N (vendor line items) and FBL5N (Customer line items)
TRUE
TRUE
TRUE
FALSE
21 Activation of the following indicator ensures that the debits and credits of line item in
the document match
not only at the document level but also at the Scenario level
a. Mandatory Field
b. Inheritance
c. Zero Balance
d. Item Category
FALSE
FALSE
TRUE
FALSE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
24 If you do not use Inheritance, you need to define rules for your business process to
ensure that Standard Account
Assignment objects are projected adequately to achieve zero balance setting
25 Pick out the correct Statement from below:( Assumption: More than one scenario is
assigned)
a. Zero Balance Setting needs to be activated for each Scenario desired for split reporting
b. A single Zero Balance Setting is sufficient for all Characteristics desired for split reporting
c. Mandatory Field needs to be activated for each Scenario desired for split reporting
d. A single Mandatory Field Setting is sufficient for all Scenarios desired for split reporting
TRUE
TRUE
FALSE
TRUE
FALSE
26 The Mandatory field is an extension of the Field Status for line items which require
data in some fields which cannot be
entered manually. Besides, this field also checks for the availability of a suitable
document splitting Rule
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
32 A document splitting rule defines the item categories which are capable of undergoing a
split and also defines
one of the item categories as Base Item category which determines the basis of
document split
TRUE
TRUE
TRUE
TRUE
36 Real-time integration between CO-FI, and in that order, is an additional benefit offered
by New General Ledger and
this faciliatates bi-directional navigation between FI and CO for realtime reconciliation
purposes
TRUE
FALSE
38 Defining a realtime integration Variant and assignment of the same to your company
code helps in realtime integration
between FI and CO Modules
TRUE
TRUE
39 A Trace can be activated in the Realtime integration variant at client level which
generates many log entries
TRUE
TRUE
TRUE
42 The following usual periodic tasks are still possible ( of course , with slight modification
)
using New General Ledger
a. Balance Carry Forward in FI
b. Reclassification and Regrouping of Receivables and Payables
c. Flat Rate Individual Value Adjustment
TRUE
TRUE
TRUE
FALSE
44 Defining a Valuation Area and Valuation Method are pre-requisites for carrying out a
Foreign Currency Valuation Run
using the New General Ledger
TRUE
TRUE
TRUE
47 In the New General Ledger, Line item display is possible for a General Ledger Account
for which the Line item
display has not been activated in the related Master Record
TRUE
48 Transaction FGI0 displays a list of defined program variants for executing many
drilldown reports
TRUE
PART 2
1 Pick out the correct options
Activation of the New General Ledger offers the following options
a. Legal and Management Reporting
b. Financial Reporting using characteristics
c. Parallel Accounting
d. Segment Reporting
e.Realtime integration between CO and FI
TRUE
TRUE
TRUE
TRUE
TRUE
f. Segment Reporting
g. Accelerated Period end closing
h.Transparency and Consistency
i. Easier Asset Management
j. Simpler Credit Management
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
3 User Interface for data entry in the New General Ledger is the same as before
TRUE
TRUE
TRUE
TRUE
6 The TCode for hiding the old Financial Accounting Paths is called
a. RFAGL_SWAP_IMG_OLD
b. RFAGL_SWAP_IMG_NEW
TRUE
FALSE
FALSE
FALSE
TRUE
FALSE
8 If you decide to use non-leading ledger(s), you have the option of choosing Fiscal Year
variant and / currencies which may differ from those assigned to the leading ledger
9 Additional Standard Fields available for updation in the New General Ledger are
a. Cost Center
b. Profit Center
c. Segment
d. User-defined fields, if any
10 Additional fields for updation in the New General Ledger are called Scenarios
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
11 Apart from the six pre-defined scenarios (Cost Center,Profit Center,Business Area,
Segment,Functional Area and Consolidation), you can define your own scenarios
12 The entry view of the General Ledger appears the way data is entered and as reflected
in the subkedgers whereas the General Ledger View portrays a view of how a document
appears in the General Ledger only
FALSE
TRUE
FALSE
14 A Segment
a. may be assigned to a Profit Center
b. may be assigned to a Cost Center
c. may be derived using a Business Add-in (FAGL_DERIVE_SEGMENT)
d. may be assigned to a Document Type
TRUE
FALSE
TRUE
FALSE
TRUE
16 Scenario Assignment is not sufficient to effect Zero Balance Setting for the related entity
TRUE
TRUE
TRUE
18 Reposting of Line items results in the formation of additional clearing line items
TRUE
TRUE
TRUE
20 Entity balancing is supported by the Zero Balance indicator pertaining to the entity
TRUE
21 Mandatory Field activation is not only an extension of the field status but also a check
to ensure that a valid document splitting rule is available
TRUE
TRUE
TRUE
24 A Splitting method is the total of all splitting rules of all business transactions
TRUE
TRUE
TRUE
TRUE
28 A Document Split Rule identifies a single base item category based on which other
item categories undergo document split
TRUE
TRUE
30 The subledger view (FBL1n / FBL5N) is capable of showing the document split
FALSE
FALSE
32 FI - CO Reconciliation and in that order was available in the Classical Ledger itself
TRUE
33 CO - FI Reconciliation and in that order was not available in the classical ledger
TRUE
34 Realtime Bi-Directional Navigation in the New General Ledger eliminates the tedious
process of reconciliation between FI and CO through the use of a reconciliation ledger
TRUE
TRUE
TRUE
FALSE
TRUE
39 The 'Classic ' Financial Statement run Program RFBILA00 can be run even after
New General Ledger has been activated
TRUE
TRUE
40 FGI0 and FSI0 are programs which can be run to create many drill down versions of reports
41 Line item display is possible for General Ledger Accounts master records of which do
not have
activated Line Item display setting
TRUE
42 FAGLL03 and FAGLB03 are the Tcodes for running Line item and document displays
TRUE
Global
SAP EDUCATION
SAMPLE QUESTIONS: C_TFIN52_64
SAP Certified Application Associate Financial Accounting with SAP ERP 6.0 EHP4
print view
Disclaimer: These sample questions are for self-evaluation purposes only and do not
appear on the actual certification exams. Answering the sample questions correctly is no
guarantee that you will pass the certification exam. The certification exam covers a much
broader spectrum of topics, so do make sure you have familiarized yourself with all topics
listed in the exam competency areas before taking the certification exam.
Questions
1. In New GL, how would you incorporate companies with different fiscal years if you
wanted to assign them to the same controlling area?
Please choose the correct answer.
a)
Use the same fiscal year variant for all company codes and
do a reversible close for the company codes that have
different fiscal years.
b)
Use the same fiscal year variant for all company codes and
set up parallel accounting for company codes that have
different fiscal years.
c)
d)
Create company codes with the same fiscal year variant and
assign the company codes that have a different fiscal year to
non-leading ledgers with the appropriate fiscal year variant.
are updated.
b)
c)
d)
b)
c)
d)
4. Your customer wants to add a new company code and asks you to make the
configuration settings for document types and number ranges. What do you have to do?
Please choose the correct answer.
a)
b)
c)
d)
5. Which object has to be used to avoid a change of the reconciliation account in the
customer's master data?
Please choose the correct answer.
a)
b)
c)
d)
Cost center.
b)
Internal order.
c)
Profit center.
d)
WBS element.
e)
Profitability segment.
b)
c)
d)
b)
c)
d)
9. Which of the following are interactive functions available in the SAP List Viewer
There are 3 correct answers to this question.
a)
Dual control.
b)
Sorting.
c)
d)
Summation.
e)
Filters.
10. What are the necessary elements required to create a customer-specific drilldown
report for New General Ledger Accounting?
There are 2 correct answers to this question.
a)
A form.
b)
Characteristics.
c)
Variables.
d)
A report header
Solutions
5 b) Incorrect
1 d) Correct
2 d) Incorrect 3 d) Correct
4 d) Incorrect 5 d) Correct
6 a) Correct
7 a) Correct
9 a) Incorrect 10 a) Correct
6 b) Correct
6 c) Incorrect 7 c) Correct
6 d) Correct
8 a) Correct
10 b) Correct
8 c) Incorrect 9 c) Incorrect 10 c)
Incorrect
6 e) Incorrect
10 d)
Incorrect
9 e) Correct
Global
SAP EDUCATION
SAMPLE QUESTIONS: C_TERP10_60
SAP Certified Business Associate with SAP ERP 6.0 print view
Disclaimer: These sample questions are for self-evaluation purposes only and do not
appear on the actual certification exams. Answering the sample questions correctly is no
guarantee that you will pass the certification exam. The certification exam covers a much
broader spectrum of topics, so make sure you have familiarized yourself with all topics
listed in the exam competency areas before taking the certification exam.
Questions
Exchange Infrastructure
b)
Application Platform
c)
People Integration
d)
Information Integration
e)
Process Integration
Enterprise Portal
b)
Collaboration
c)
Business Intelligence
d)
Multi-Channel Access
e)
Process Integration
f)
Exchange Infrastructure
3. You are creating a query using the Query Designer, in SAP Business Intelligence. The
Query Designer is divided into subareas.
Which of the following are subareas in the Query Designer?
Note: There are 2 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
Rows
b)
Preview
c)
Headings
d)
Selection criteria
4. You are designing a query in SAP Business Intelligence. When you are viewing the
query results, you want to be able to drill down by the characteristics product and product
line.
To which subarea would you drag and drop these characteristics in the Query Designer?
Please choose the correct answer.
a)
Free characteristics
b)
Filter
c)
Rows
d)
Columns
5. SAP ERP offers additional capabilities compared with SAP R/3 Enterprise, making
SAP ERP the state-of-the-art ERP solution.
Which of the following SAP ERP capabilities was also available on earlier releases like
SAP R/3 Enterprise?
b)
c)
E-Recruiting
d)
SAP NetWeaver
6. Which SAP ERP reporting solution enables the analysis of data from operative SAP
applications, as well as other business applications and external data sources, such as
databases, online services, and the Internet?
Please choose the correct answer.
a)
b)
c)
d)
List viewer
A purchase order
b)
c)
d)
A purchase requisition
e)
A customer's invoice
More than one answer is correct. Please choose the correct answers.
a)
b)
c)
d)
e)
9. You are explaining the Sales Order Management business process in SAP ERP to a
colleague.
Which Sales Order Management business process transaction, in SAP ERP, creates a
financial accounting document?
Please choose the correct answer.
a)
b)
c)
d)
10. You are reviewing the personnel structure in SAP ERP Human Capital Management.
Which element of the personnel structure defines different payroll procedures, such as
hourly versus salaried?
Please choose the correct answer.
a)
Employee subgroup
b)
Personnel subgroup
c)
Payroll area
d)
Employee group
11. You are explaining to a colleague that Human Capital Management, in SAP ERP,
stores an employee's data in infotype records.
Which statements correctly describe the features of infotypes?
Note: There are 3 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
The personnel file lists only the infotypes valid for the
current period.
b)
c)
d)
e)
12. Your organization uses SAP ERP Inventory Management. You are explaining stock
transfers and transfer postings to the project team.
Which of the following statements would you use to correctly describe stock transfers and
transfer postings?
Note: There are 2 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
b)
c)
d)
13. Your organization is implementing SAP ERP Logistics Execution. As a project team
member, you are responsible for defining and assigning the organizational levels relevant
for Logistics Execution.
b)
c)
d)
e)
14. Your organization is using SAP ERP Manufacturing Execution. You are explaining
the master data that supports the Manufacturing Execution process.
What is the purpose of a routing?
Please choose the correct answer.
a)
b)
c)
d)
e)
15. Your organization uses SAP ERP Manufacturing Execution. You are reviewing a
production order and notice that no labor time has been recorded in the production order.
Which Manufacturing Execution business process step has not been completed?
Please choose the correct answer.
a)
Goods issue
b)
Confirmation
c)
Goods receipt
d)
Order settlement
e)
Variance calculation
16. In SAP ERP, you can manage all product and project related data using SAP Product
Lifecycle Management.
Which of the following SAP Product Lifecycle Management components provides the
integration of external files into SAP ERP?
Please choose the correct answer.
a)
b)
c)
Document Management
d)
17. In SAP ERP Management Accounting, specific organizational levels can be defined
for the various components.
Which SAP ERP Management Accounting component requires an operating concern?
Please choose the correct answer.
a)
b)
Profitability Analysis
c)
d)
18. In SAP ERP Management Accounting, your organization is using Cost Center
Accounting. You are in the process of defining cost centers.
Which of the following fields are required to create a cost center, in SAP ERP Cost
Center Accounting?
Note: There are 3 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
User responsible
b)
Hierarchy area
c)
Company code
d)
Person responsible
e)
Description
19. Goods issue transactions posted in SAP ERP Materials Management can be assigned
to a CO object. This type of transaction is called material consumption.
When a goods issue is entered, which Management Accounting master data is used to
record the consumption posting?
Please choose the correct answer.
a)
G/L account
b)
Activity type
c)
d)
20. Your organization is implementing SAP ERP Material Planning. Your team is
creating bills of material (BOM). You explain to your team that the bill of material
contains the assemblies or components which are to be included in the production of a
material.
Which of the following correctly describe the features of bills of material?
Note: There are 2 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
b)
c)
d)
21. You are explaining SAP ERP Material Planning to your colleagues. They are
b)
c)
d)
The suggested procurement quantity results from the lotsizing procedure that is set in the material master.
22. Your organization is implementing the SAP ERP Procurement Cycle, to improve
operational efficiencies.
Which of the following organizational levels are required to create a purchase order?
Note: There are 3 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
Plant
b)
Purchasing organization
c)
Storage location
d)
Vendor
e)
Purchasing group
23. Logistic invoice verification, in SAP ERP, is the process whereby a vendor's invoice
is compared to the goods receipt document and the purchase order.
What business integration processes, within SAP ERP, occurs with the completion of
logistic invoice verification?
Note: There are 3 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
b)
c)
d)
e)
24. Within SAP ERP Procurement, the procurement process is completed by logistics
invoice verification.
What happens when the invoice is posted in SAP ERP?
Please choose the correct answer.
a)
b)
c)
d)
25. In SAP ERP Program and Project Management, operative indicators define the
characteristics of a work breakdown structure (WBS) element, and also what tasks will be
performed by the WBS element when the project is being executed.
Which of the following are WBS element operative indicators?
Note: There are 3 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
Planning element
b)
c)
Budgeting element
d)
Billing element
e)
Cost element
26. Your organization is implementing the Sales Order Management Business Process in
SAP ERP. The implementation team asks your advice on the assignment of the Sales
Order Management organizational levels to other SAP ERP organizational levels.
Which of the following statements correctly describe the assignment of Sales Order
Management organizational levels in SAP ERP?
Note: There are 3 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
b)
c)
d)
e)
27. In SAP ERP, Sales Order Management Process, a billing document is created.
When a billing document is saved, in SAP ERP, what integration points occur?
Note: There are 3 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
b)
c)
d)
e)
Revenue is increased.
28. In SAP ERP Sales Order Management, you have created and saved a sales order. You
are now reviewing the order's schedule lines.
Which of the following statements correctly describe schedule lines in SAP ERP?
Note: There are 2 correct answers to this question.
More than one answer is correct. Please choose the correct answers.
a)
b)
c)
d)
29. The Sales Information System (SIS) in SAP ERP standard analyses provides
extensive functions to create sophisticated presentations and reporting for the data.
Within SIS, the data is stored using which of the following?
Please choose the correct answer.
a)
Information Providers
b)
c)
Information Cubes
d)
Information Structures
Solutions
1 a) Incorrect 2 a) Correct
3 a) Correct
4 a) Correct
1 b) Correct
3 b) Correct
4 b) Incorrect 5 b) Correct
2 b) Correct
5 a) Incorrect
1 e) Incorrect 2 e) Incorrect
2 f) Incorrect
6 a) Incorrect 7 a) Incorrect 8 a) Correct
9 a) Incorrect 10 a) Correct
6 b) Correct
9 b) Incorrect 10 b)
Incorrect
7 b) Incorrect 8 b) Correct
8 d) Correct
7 e) Incorrect 8 e) Incorrect
9 d) Correct
10 d)
Incorrect
11 a)
Incorrect
12 a) Correct 13 a)
Incorrect
14 a)
Incorrect
15 a)
Incorrect
15 b) Correct
11 c) Correct 12 c)
Incorrect
13 c)
Incorrect
14 c) Correct 15 c)
Incorrect
11 d)
Incorrect
13 d)
Incorrect
14 d)
Incorrect
15 d)
Incorrect
13 e)
Incorrect
14 e)
Incorrect
15 e)
Incorrect
18 a)
Incorrect
19 a)
Incorrect
20 a)
Incorrect
12 d)
Incorrect
11 e) Correct
16 a)
Incorrect
17 a)
Incorrect
16 b)
Incorrect
17 b) Correct 18 b) Correct 19 b)
Incorrect
20 b) Correct
16 c) Correct 17 c)
Incorrect
18 c) Correct 19 c)
Incorrect
16 d)
Incorrect
17 d)
Incorrect
20 c)
Incorrect
18 e)
Incorrect
21 a) Correct 22 a) Correct 23 a)
Incorrect
24 a)
Incorrect
25 a) Correct
21 b)
Incorrect
22 b) Correct 23 b) Correct 24 b)
Incorrect
25 b) Correct
21 c)
Incorrect
22 c)
Incorrect
25 c)
Incorrect
21 d) Correct 22 d)
Incorrect
23 c)
Incorrect
24 c)
Incorrect
22 e) Correct 23 e) Correct
25 e)
Incorrect
26 a) Correct
27 a) Correct
28 a) Correct
29 a) Incorrect
26 b) Correct
27 b) Incorrect
28 b) Incorrect
29 b) Incorrect
26 c) Incorrect
27 c) Incorrect
28 c) Correct
29 c) Incorrect
26 d) Incorrect
27 d) Correct
28 d) Incorrect
29 d) Correct
26 e) Correct
27 e) Correct
TFIN 50_Part 1
Please note that some of the Questions may show incorrect
Answers, be Cautious!!!
#
Opt
Questions
1
1
1
1
1
2
2
b You cannot include customer accounts from different clients in one dunning run
A user master record must be set up for each user at the Company Code level
a
b
c
d
4
4
4
4
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
While creating a company code by copying, Global parameters cover the following
3
3
3
3
Answer
Chart of Accounts
Fiscal Year
Company code default values
Business Areas
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
5
5
5
5
6
6
While creating a company code, if an existing company code is copied using the "copy
company code" function,some of the data that will be copied are:
a
b
c
d
TRUE
TRUE
TRUE
TRUE
TRUE
b Company Code is the biggest organizational unit in the SAP system hierarchy
6
6
FALSE
TRUE
7
7
7
7
7
TRUE
TRUE
FALSE
TRUE
From the follwoing statements, select only the statements which according to you,
are TRUE:
a The variant principle is a three step method used in R/3 to assign particular
properties to one or more R/3 objects
b The variant principle is not applicable in the case of Field Status
c The variant principle is used in Posting periods definition
d In the case of Fiscal Years, It is optional to use the Variant principle
8
8
8
8
9
9
9
9
9
From the following statements, select only the statements which according to you,
are TRUE:
a The fiscal year variant specifies whether a period is open or closed
b The fiscal year variant only defines the number of periods and their start and finish
dates
c A non-calendar year can have between 1 and 16 posting periods
d If the fiscal year differs from the calendar year, but the posting periods correspond to
calendar months, the day limit for February should be 29 to consider leap years
FALSE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
13
13
13
13
13
14
14
From the following statements, select only the statements which according to you,
are TRUE:
a Special periods are used for postings that are not assigned to time periods but to the
process of a "year end closing"
b In total, you can define 16 special periods
c The system derives the posting period from the posting date
d If the posting date falls within the last normal period, you cannot post the transaction
in one of the special periods
From the following statements, select only the statements which according to you,
are TRUE:
a The group account number is used for Group Company reporting if the company
codes use same Operational chart of accounts
b A group account number can be assigned for each G/L account
c If the chart of accounts has not been translated into the appropriate logon language,
the account name appears in the maintenance language
d To use one of the accounts from the assigned chart of accounts in your company
code, you must create a company code segment for the account
From the following statements, select only the statements which according to you,
are FALSE:
a A list of all general ledger accounts used by one or several company codes is known
as account groups
b While creating a country specific chart of accounts, the 'maintenance language'
means the official language of the country
c While creating a chart of accounts, the length of G/L account numbers should always
be 10 digits
d Even though a chart of account is blocked, it can be used by company code on a
temporary basis
From the following statements, select only the statements which according to you,
are TRUE:
a The new fiscal year will be opened when the first posting in the new fiscal year is
made
b The relationship between currencies is maintained with translation ratios
c As the inflation can heavily influence the relationship between currencies, it is better
to maintain the translation ratios on a time period basis
d The exchange rates updated on daily basis should never be deleted
From the following statements, select only the statements which according to you,
are TRUE:
a Business areas can be assigned to the client directly
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
14
14
14
b It is the country key that specifies which country is to be regarded as the home
country
c If the language key is entered, the system automatically creates texts in the correct
language
d If the number and start and end dates for the periods are the same for every year,
such a fiscal year is known as a year-specific fiscal year
15
15
15
15
15
16
16
16
16
16
17
17
17
17
17
18
18
From the following statements, select only the statements which according to you,
are TRUE:
a A translation between two foreign currencies is calculated via the base currency
b The process of calculating the opposite rate from a defined exchange rate is known
as Inversion
c Any number of parallel currencies can be used in a SAP system
d The currency used in consolidated financial statements is called the Group currency
From the following statements, select only the statements which according to you,
are TRUE:
a If all the fiscal years of fiscal year variant have the same number of posting periods,
only the different period dates for the different years have to be defined
b If one year of a fiscal year variant has less posting periods than the others, it is called
a shortened fiscal year
c You have to close the previous fiscal year before you can post data in the new fiscal
year
d The new fiscal year is automatically opened when the "balance carried forward
program" has been run
From the following statements, select only the statements which according to you,
are TRUE:
a The ID given to the customer/vendor accounting clerk can be used for sorting
dunning payment and proposal lists
TRUE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
18
b In tolerance groups, the upper limit is set in the local currency of the company code
18
18
19
19
19
19
From the following statements, select only the statements which according to you,
are FALSE:
a It is not possible to have different local currencies for company codes under a group
company
b Exchange rates are maintained at the company code level
c The company code will always be a six digit numeric code
d All currencies other than the company code currency are called as foreign currencies
20
20
20
20
20
The steps involved for using a particular variant in mySAP ERP system are:
a Defining the variant
b Determining the values for the variant
c Assigning the values to a Cost Center
d Assign the variant to R/3 objects
21
State which of the following statements given below are TRUE in respect of a Fiscal
Year:
a Fiscal Year must be defined to assign business transactions to different periods
19
21
21
21
21
22
22
22
22
22
23
TRUE
FALSE
FALSE
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
23
23
23
23
24
24
24
24
24
25
25
25
25
25
26
a Before defining the shortened fiscal year and its number of posting periods, the
period dates have to be defined
b In the case of a shortened fiscal year, you can assign only a lower number of posting
periods
c A shortened fiscal year should always be defined as year independent
d A shortened fiscal year and the following or previous complete fiscal year can be
defined in one fiscal year variant
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
26
b In SAP, prefixes can be used to differentiate between direct and indirect quotations
26
26
27
27
From the following statements, select only the statements which are true
a The chart of accounts is a variant which contains the structure and the basic
information about general ledger accounts
b The chart of accounts must be assigned to every company code for which accounts
are to be set up based on the structure concerned
c An operating chart of accounts contains the G/L account information that you use for
your daily transactions
d In addition to the operating chart of accounts, any additional number of charts of
accounts can be assigned to a Company Code
27
FALSE
TRUE
a In direct quotation, one unit of the foreign currency is quoted for the local currency
27
TRUE
26
27
FALSE
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
28
28
28
28
28
From the following statements, select only the statements which are true
a The G/L accounts used by the entire corporate group is known as the Group Chart of
Accounts
b Assigning a group chart of account to a company code is not obligatory
c A chart of accounts specifically created to cater to any particular country's legal
requirements is known as country-specific chart of accounts
d It is always necessary to create and assign a country specific chart of accounts to a
company code
29
29
29
From the following statements, select only the statements which are true
a A chart of accounts that is not yet completed can be blocked
b While defining the chart of accounts, cost elements can be created only manually
29
29
30
30
30
30
From the following statements, select only the statements which are true
a It is not possible to translate the chart of accounts into other languages
b If company codes intend to use cross-company code controlling, they must use the
same chart of accounts
c If the chart of accounts has not been translated into the appropriate logon language,
the account name appears in the maintenance language
d Assignment of Chart of Accounts to Company Code is optional
31
31
31
31
31
a
b
c
d
32
32
32
32
32
33
33
From the following statements, select only the statements which are true
a Texts in different langauges cannot be assigned to a GL in chart of accounts segment
30
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
FALSE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
33
33
33
34
b The information entered in the chart of accounts segment for a General Ledger
account applies to all company codes
c Account numbers can be searched using key words
d It is possible to define and change the layout of the tab pages for the individual
processing of the general ledger master data.
TRUE
TRUE
TRUE
34
From the following statements, select only the statements which are true in respect
of customer/vendor accounts
a Customer/Vendor accounts data is usually maintained at two levels-client level and
company code level
b The general data of the customer/vendor accounts is maintained at the company
code level
c The company code specific data is always maintained at the company code level
34
TRUE
35
35
From the following statements, select only the statements which are true
a If any company code wishes to do business with a specific customer or vendor, it has
to create a company code segment for this customer or vendor
TRUE
34
34
35
35
35
36
36
36
36
36
b Any sales area, that wants to do business with a customer has to create a sales area
segment
c The sales area segment contains sales area specific data
d In SAP, it is not possible to create purchasing organization segment in respect of
vendors
From the following statements, select only the statements which are true
a The account number is assigned to the customer at the client level
b The account number for a customer is the same for all company codes and sales
areas
c In the case of accounts receivables, data can be maintained centrally for all areas or
separately for FI and SD
d If matchcodes are used before you create a new customer/vendor account,
duplication of accounts cannot be prevented
37
37
From the following statements, select only the statements which are true
a Vendor account segment consists of several pages with different groups of fields
37
b If you want to change or display an account, you can go directly to every page by
selecting it on the initial screen
c Customers/Vendors who belong to the same corporate group can be bundled
together under a user defined group key
37
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
37
d If the name of the clerk is entered in the Customer/Vendor account, the clerk's name
can printed on all correspondence arising from his end
38
From the following statements, select only the statements which are true in respect
of posting periods
a Posting periods are defined in the fiscal year variant
b Posting periods can be closed to prevent documents from being posted to an
incorrect posting period
c More than one posting periods cannot be kept open at a time
d During the normal course, the current posting period will be open and all other
posting periods will be closed
38
38
38
38
39
TRUE
TRUE
TRUE
FALSE
TRUE
39
From the following statements, select only the statements which are true in respect
of posting periods
a During period closing, special periods cannot be opened for closing postings
39
39
FALSE
39
TRUE
40
40
40
From the following statements, select only the statements which are true
a One posting period variant can be used only by one company code
b For all company codes assigned to same Posting period Variant, the posting periods
are opened and closed simultaneously
c For a certain period, postings to customer accounts may be permitted while postings
to vendor accounts may not
d At the line item level, the system checks the account type of the posting key to
ensure that the period is open for the assigned account type
40
40
41
41
41
41
41
42
From the following statements, select only the statements which are true
a When entering a document, among other items, if you enter the posting date, the
system automatically determines the posting period and fiscal year based on the
posting date entered
b If you display the balance of an account, the transaction figures for the posting
periods are displayed
c In the document overview, the posting date, posting period, and fiscal year will be
displayed
d The posting period variant is assigned to the client
From the following statements, select only the statements which are true
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
42
42
42
42
43
43
43
43
43
44
a A posting period variant must contain at least one line with the entry "valid for all
TRUE
accounts"
b Posting periods are opened and closed automatically
FALSE
c The authorization group in the posting period variant applies only to authorization for
FALSE
posting in special periods
d The processing of payment differences can be controlled using tolerance groups
TRUE
From the following statements, select only the statements which are true in respect
of Document Structure:
a In mySAP ERP system, the document posted remains as a complete unit in the
system until it is archived
b FI Documents usually include a document header and only 2 line items.
c A document header is the information that applies to the line items
d The header data is controlled by the document type
TRUE
FALSE
TRUE
TRUE
44
From the following statements, select only the statements which according to you
are TRUE
a The document items contain the information that applies to the entire document
44
44
FALSE
44
TRUE
45
45
45
From the following statements, select only the statements which are TRUE in the
context of FI documents
a Posting Key refers to the debit or credit indicator
b In my SAP ERP system, a business transaction can create more than one documents
45
45
d Documents that are connected to each other are linked in the system so that you
have an overview of every business transaction in the system
46
46
46
46
46
47
In certain cases, FI documents will be created even if there is no effect for accounting
From the following statements, select only the statements which are true
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
47
47
47
47
48
48
48
48
48
49
From the following items, select only those items, which according to you are defined
by document types
a Number ranges of document numbers
b Account types permitted for posting
c The field status of all document header fields
d Whether invoices are posted with the net procedure or not
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
49
49
From the following statements, select only the statements which according to you
are TRUE:
a The document storage can be controlled by the document type
b Document type AB is a universal document ie., it allows postings to all account types
49
49
FALSE
50
50
50
50
50
TRUE
TRUE
TRUE
FALSE
51
51
From the following statements, select only the statements which are TRUE
a The posting key specifies whether the line item is connected to a payment
transaction or not
b The posting key does not specify whether the posting is sales-relevant
c Postings cannot be made unless the Field Status Variant has been assigned to the
client
d If a document is posted to a sub ledger account, the field status group of the
reconciliation account is used
51
51
51
52
The document number range must be defined for the year in which it is used
From the following statements, select only the statements which are true in respect
of Document Field Status:
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
52
52
52
52
53
53
53
53
53
54
54
54
54
54
a If business areas are used, it is not possible to set the business area field to either
"Hide" or "Display"
b Entries in tax fields are only possible if the G/L account is relevant for tax
c To avoid error, the field status "Hide" should always be used in combination with the
field status "Required"
d For every G/L account, you have to define the status of document entry field
From the following statements, select only the statements which are true in respect
of Document Field Status:
a The field status groups are assigned to the respective G/L accounts in the G/L
account master records
b The field status groups are summarized in one Field Status Variant
c The Field Status Variant should always be assigned to the client
d Field status definitions of Posting Keys and the Field status group, defines the
transaction dependent and account dependent fields status respectively
From the following statements, select only the statements which are TRUE in respect
of company code segment of G/L account:
a The company code segment is added to the chart of accounts segment and together
they form the account
b The company code segment contains information that refers exclusively to the
company code concerned
c The company code segment information controls the entry of accounting documents
and the management of accounting data
d In case of some accounts you can create the company code segment before creating
a chart of accounts segment
55
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
The Account Control information included in the company code segment contain:
55
55
55
55
a
b
c
d
56
56
56
56
56
TRUE
Account Currency
Tax Category
Planning Level
Alternative Account Number
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
57
57
57
57
57
58
58
58
58
58
59
59
59
59
59
60
60
60
60
60
61
61
61
a
b
c
d
In tolerance groups, you can enter the upper limits for the following:
Total amount per document
Amount per customer/vendor item
Cash discount which a user is able to grant
Total amount per day
The fields displayed in the G/L account master record are controlled only by the
account group
d If you do not want to use the transaction-specific control, the field status for all fields
have to be set to "optional"
Select the statements which according to you, are TRUE in respect of Balance Sheet
and Profit and Loss Accounts:
a In the chart of accounts segment, you have to specify whether the account is a
Balance Sheet or a Profit and Loss account
b At the time of closing, in the case of Balance Sheet accounts, the balance will be
carried forward to the Retained Earnings account
c In the case of Profit and Loss accounts, once the balance is carried forward, the Profit
and Loss account is set to zero
d A key is assigned to the Retained Earnings account to which the balance is carried
forward and this will be entered in the chart of accounts segment
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
61
61
62
62
62
62
All postings to the subledger accounts are automatically posted to the assigned
reconciliation accounts.
d If reconciliation accounts are used, the general ledger will never be up to date.
62
d While posting a Document, the balance is the difference between the debit and
credit transaction figure.
63
Select the statements which according to you, are TRUE in respect of line item
display:
a The "line item display" field is a control field in the Chart of Account segment of an
account.
b For accounts without "line item display", only the transaction figures are updated
when documents are posted to these accounts.
c In the case of accounts with "line item display", the most important data from the
posted line items is stored in a special index table.
d In the case of accounts with "line item display" , when a user wants to look at the
account online, they can view both the balance and the individual line items.
63
63
63
63
64
64
64
From the following statements select only the statements which are True:
a For accounts with "line item display", only the transaction figures are updated when
documents are posted to these accounts.
b You always display the line items of all GL accounts.
c In mySAP ERP system, it is always better to use "line item display", only if there is no
other way of looking at the line items as the line item display takes up additional
system resources.
d Items in accounts with open item management are specified as open or cleared.
65
65
65
65
65
64
64
TRUE
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
66
66
From the following statements select only the statement which are TRUE:
a Accounts with open item management must always have line item display activated.
66
b Open item management is not a prerequisite if you need to check whether there is
an offsetting posting for a given business transactions.
c It is possible to display open and cleared items separately.
d Open item management can be activated or deactivated only if the account has a
balance.
66
66
67
67
67
67
67
68
Select the statements which according to you, are TRUE in respect of accounts in
local currency.
a It is possible to select either the local currency or a foreign currency as a account
currency.
b As standard, the local currency is proposed as the account currency when a G/L
account is created.
c If the account currency is the local currency, the account cannot be posted to in any
currency.
d The other currencies are translated into the local currency for each line item.
68
68
68
68
69
69
69
69
Select the statements which according to you, are TRUE in respect of "Balances in
Local Currency Only" indicator:
a If the " Only balances in local currency" is set in the master record, transaction figures
are only managed for amounts converted to the local currency.
b The "Only balances in local currency" indicator must not be set in cash discount and
GR/IR clearing account.
c The indicator must not be set in reconciliation accounts for customers or vendors.
69
d The indicator is usually set in balance sheet accounts that are not managed in foreign
currencies and not managed on an open item basis.
70
70
TRUE
FALSE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
70
70
70
b It is possible to change the master data in the chart of accounts segment, company
code segment, OR the names of several G/L accounts at the same time
c
Collective processing can be done even if the general ledger accounts are from
different chart of accounts
d General ledger accounts that are managed in a foreign currency can be posted in any
currency
71
71
71
71
71
a
b
c
d
72
72
72
72
72
73
73
From the following statements select only the statements which areTRUE:
a The account number for a vendor is the same for all company codes and purchasing
area organization
b IBAN stands for International Bank Area Number
c IBAN contains a maximum of 34 alpha numeric characters
d The IBAN is structured differently in every country
73
73
73
74
74
74
From the following statements select only the statements which areTRUE:
a The IBAN usually contains the country code, bank key, company code and account
number
b The IBAN can be entered as part of the bank details for customer/vendor master data
74
74
75
75
75
The IBAN can be entered in a vendor/customer master record if the business partner
provides his or her IBAN and requests the entry
d It is possible to automatically generate and save the IBANs for several master records
From the following statements select only the statements which areTRUE:
a In FI, once the account of customer/vendor has been created, the account group can
no longer be changed
b The account group controls whether the account is a one-time customer or vendor
account
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
75
75
There are separate number ranges for customer and vendor accounts defined at
client level & shared amongst Company codes.
d For each number range, you can define whether the number assignment is internal or
external
76
76
From the following statements select only the statements which areTRUE:
a If internal number assignment is used, system cannot display the current number
76
76
76
77
77
77
77
77
78
78
78
78
78
79
79
79
79
From the following statements select only the statements which areTRUE:
a In the case of one time accounts, the customer/vendor specific fields should be
hidden
b The customer/vendor specific data for one time customers/vendors is entered in the
document at the time of posting
c Account group dependent field status means that all accounts of one account group
have the same screen layout
d Transaction dependent field status should be set to "Display" for the "change"
transaction if the field is not to be changed after it has been created
In FI, the layout of customer/vendor master data screens can be affected by several
factors:
a Account group dependent control
b Transaction dependent control
c Company code dependent control
d Controlling Area dependent control
From the following statements select only the statements which areTRUE:
a Fields that are accessed with the "display" transaction are always either displayed or
supressed
b If you do not want to use the transaction-dependent or company code dependent
control, the field status for all fields should be set to optional
c If a particular field in the customer/vendor master record is defined as "sensitive",
the corresponding customer/vendor is blocked for payment if the entry is changed
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
79
80
80
80
80
80
81
81
d If there is a payment block because of sensitive field change, the block can be
removed only when a second person with authorization checks the change and
confirms or rejects it.
From the following statements select only the statements which areTRUE:
a The authorization group in the posting period variant applies only to authorization for
FALSE
posting in special customer/vendor clearing
b If a customer is also a vendor, or vice versa, the payment and the dunning program
TRUE
can clear open items against each other
c The open items of the assigned Vendor / Customer accounts can be displayed in the
TRUE
line item display and the open item selection screens
d Clearing of open items can be done only if the vendor account number is entered in
the customer account and the customer account number is entered in the vendor
TRUE
account and clearing option is activated in respective co code segment
From the following statements select only the statements which areTRUE:
a If clearing is to be used, the field "Clearing with vendor" in the customer account or
the corresponding field in the vendor account has to be selected
81
b Alternative payer/payee can be entered at the client level or company code level
81
81
82
82
82
82
82
83
83
TRUE
The entry in the company code segment has lower priority than the entry at the
client level
d If the "Individual Specifications" indicator is set, when creating an invoice it is
possible to enter information about individual payer/payee for a customer/vendor
that has not been created in mySAP ERP.
From the following statements select only the statements which areTRUE:
a If the alternative payer/payee is an existing customer/vendor, you can enter the
customer/vendor number as permitted payee/payer in the master record
b If an alternative payer is entered, the amount to clear the due open items in the
account is paid by the alternative payer
c If there is difference between the goods flow and the cash flow, this can be mapped
using head office and branch accounts
d All items are posted to a branch account are manually transferred to the head office
account
From the following statements select only the statements which areTRUE:
a If the "Decentralized Processing" field is selected in the head office master record,
the dunning and payment programs use the branch account for making and receiving
payments
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
83
83
83
84
84
84
84
84
85
85
85
85
85
86
86
86
86
86
87
87
87
87
87
88
88
b For every bank that is used in the system, you need not necessarily have to create a
bank master record
c Bank master records are stored centrally in the bank directory
d Every record is identified by the bank country and the bank key
From the following statements select only the statements which areTRUE:
a Banks used by your company are defined as House Banks
b In the customer/vendor master record, the field "Bank Type" is used to distinguish
between different banks
c When the bank details are entered in the Customer/Vendor master record, you have
to enter only the bank country and the bank key to access banks already created in
the directory
d When processing invoices, if the customer/vendor has more than one bank, the user
can choose a bank to process payment
a
b
c
d
From the following statements select only the statements which areTRUE:
a Every bank account is reflected in the SAP ERP system by a combination of house
bank ID and account ID
b The bank account currency should always correspond to the currency maintained in
the G/L
c It is not necessary to define the the bank accounts that are managed at the house
bank
d The Bank account can be identified by an account ID which is unique per house bank
From the following statements select only the statements which areTRUE:
a The bank account data contains the number of the accounts at your bank, the
account currency and the relevant G/L account
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
88
b It is not necessary that a G/L account should be created for every bank account
88
88
Default values can be set for fields whose value does not change very often by
creating Parameter IDs
d In the case of Parameter IDs, you can prevent input errors as the default values
appear automatically in the corresponding fields
89
a
b
c
d
90
Using the Accounting editing options, the screens can be configured for the following
areas:
a Document Entry
b Document Reversal
c Document Display
d Open Items
91
91
91
91
91
92
92
92
92
92
93
TRUE
TRUE
Some sources of values that are defaulted by the system for document entry are:
89
89
89
89
90
90
90
90
FALSE
From the following statements select only the statements which areTRUE in respect
of Default Values for User Settings:
a Users cannot hide fields irrelevant for their jobs
b User can select different display options for displaying documents
c It is possible for the users to enter the amount of a partial payment or the balance of
the new item
d During document entry, the date of the last entered transaction is proposed
automatically as the posting date
From the following statements select only the statements which areTRUE in respect
of Default Values for User Settings:
a If a document has already been entered, for the next document, the system proposes
the company code that you entered in the last document
b To enter the different business transactions in accounting, the system offers predefined document types and posting keys in the configuration
c It is not possible to control the proposal of fiscal year when you display or change the
documents
d It is possible to propose the CPU date as value date for document
From the following statements select only the statements which areTRUE:
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
93
a At the company code level, the maximum exchange rate deviation can be entered
93
93
b Maximum Exchange rate Deviation is the permitted difference between the exchange
rate in the document header of a business transaction and the exchange rate in the
exchange rate table
c If Maximum Exchange Rate Deviation is set, it is difficult to recognize and correct
incorrect entries
d In mySAP ERP System, once the documents are posted, it can never be changed
94
94
94
94
94
a
b
c
d
93
95
95
95
95
95
Select the fields that are not changeable in the case of LIne Items:
Amount can be changed
Posting Key cannot be changed
Account can be changed
Other fields that affect the transactional data, cannot be changed
From the following statements select only the statements which areTRUE in respect
of Change Control:
a In respect of Document Header, only the reference number and document header
text can be changed
b A field can be changed only if the posting period is closed
c If the document change rules are set based on the Account Type, it allows users to
define rules for customer, vendor and general ledger accounts
d If the criterion used for the document change is company code in the change rule, if
the field is blank, the rule applies to every company code
96
TRUE
TRUE
FALSE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
96
96
96
96
a
b
c
d
97
97
97
FALSE
97
97
TRUE
TRUE
98
The following criteria can be used to differentiate between document change rules:
TRUE
TRUE
TRUE
TRUE
TRUE
98
98
98
98
a
b
c
d
Account Type
Transaction Class
Company Code
Business Areas
TRUE
TRUE
TRUE
FALSE
99
99
99
99
99
a
b
c
d
TRUE
FALSE
TRUE
FALSE
100
100
100
100
100
101
101
101
101
From the following statements select only the statements which areTRUE in the
context of Document Reversal:
a In FI, documents can be reversed either by standard reversal posting or with a
negative posting
b General Ledger, customer and vendor documents can be reversed either individually
or in a mass reversal
c If the standard reversal is followed, the document can be reversed without specifying
a reversal reason
d Documents with cleared items cannot be reversed without resetting
From the following statements select only the statements which areTRUE:
a The reversal reason controls whether the reversal date is allowed to differentiate
from the original posting date
b The normal reversal posting causes the system to post the incorrect debit as a credit
and the incorrect credit as a debit
c The normal reversal does not cause an additional increase in the transaction figures
101
d In the case of negative posting, the posted amount is subtracted from the transaction
figures of the other side of the account
102
From the following statements select only the statements which areTRUE in the
context of Document Reversal:
a The negative posting sets the transaction figures back to as they were before the
incorrect posting took place
b In normal cases, only the negative posting is followed by the system
c Under exceptional circumstances,negative posting can be done even if reversal
reason is not defined for negative posting and the company code does not permit
negative postings
d Negative postings can also be used in the case of transfer postings of incorrect line
items
102
102
102
102
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
FALSE
TRUE
103
103
103
103
103
104
104
104
104
104
From the following statements select only the statements which areTRUE in respect
of Terms of Payment:
a In my SAP ERP System, it is not possible to add new terms of payment in addition to
those defined in the system
b The invoice due date and the cash discount are calculated on the basis of terms of
payment
c Baseline date is the date from which the due date is derived
d If the terms of payment are entered at the time of processing the documents, the
system automatically calculates the required conditions of payment
From the following statements select only the statements which areTRUE in the
respect of Terms of Payment and Cash Discount:
a If the invoice is created in FI, the terms of payment from the company code segment
are proposed
b If the invoice is created in Sales Order Management, the payment terms are
proposed from the Sales Area Segment
c If the Vendor invoice is created in Purchasing Management, the terms of payment
from the Chart of Accounts Segment are proposed
d It is not possible to set a fixed cash discount amount or a cash discount percentage
rate when you enter a vendor invoice
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
105
105
105
105
105
TRUE
TRUE
TRUE
FALSE
106
106
From the following statements select only the statements which areTRUE :
a At the time of document entry, if the invoice number is entered in the "Invoice
Reference" field, credit memos can be linked to the original invoice
TRUE
b In the case of invoice related credit memos, the terms of payment are copied from
the invoice so that the invoice and the credit memo are due on the same date
TRUE
106
106
106
107
107
Terms of payment in credit memos other than invoice related credit memos are valid
by default
d In the case of non-invoice related credit memos, the payment terms can be activated
by entering a 'V' in the "Invoice Reference" field during document entry
From the following statements select only the statements which areTRUE :
a The day limit is the calendar day to which the terms of payment are valid
FALSE
TRUE
TRUE
107
107
107
b Using the day limit, it is possible to store single or multi-part terms of payment in a
"terms of payment key"
c The description of terms of payment does not include a Sales Order Management
text automatically
d The sub ledger in which the terms of payment can be used is defined by the account
type
108
108
From the following statements select only the statements which areTRUE :
a Line items or accounts can be blocked for payment or collection by using "block keys"
108
108
108
109
109
From the following statements select only the statements which areTRUE :
a Block key and payment method defined in a payment term, will however, be not
defaulted in the line item when the payment term is used
b For automatically calculating the cash discount, the days and months specified in the
terms of payment are used in conjunction with the baseline date
109
109
Day limit enables date-specific terms of payment in one terms of payment key
109
d It is possible to define several versions of terms of payment with each version having
a different day limit
110
110
110
From the following statements select only the statements which areTRUE in respect
of Terms of Payment and Cash Discounts:
a Only upto two cash discount periods can be entered
b The day limit is the baseline date upto which the payment term version applies
110
The entry for the specified day limit is added to the terms of payment key which
results in two entries where different terms of payments can be defined
110
111
111
From the following statements select only the statements which areTRUE :
a The automatic installment calculation will work only if cash discount periods or cash
discount percentage rates are not assigned
b In the case of automatic installment split, the system creates two line items each for
every installment specified
111
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
111
111
112
112
112
112
112
113
113
113
113
113
114
114
114
114
114
115
115
115
The terms of payment for the line items are the terms of payment defined for the
individual installments
d Depending on the national regulations of your country, the cash discount base
amount can either be the net value or the gross value
From the following statements select only the statements which according to you
areTRUE in respect of Cash Discounts :
a Cash discounts cannot be changed once the invoice is posted
b When an open item on a customer or vendor account is cleared, the possible cash
discount is posted automatically to an account for "cash discount expense" or "cash
discount received"
c It is possible to define the accounts for cash discount expense or cash discount
revenue in the configuration
d If you post a vendor invoice with a document type for the net procedure, the amount
posted to the expense or balance sheet account is reduced by the cash discount
amount
From the following statements select only the statements which areTRUE in respect
of Net Procedure of posting Cash Discounts:
a If the net procedure is used, a cash discount clearing account, managed on a open
item basis, is used to clear the posting
b When you use the net procedure, the cash discount amount will not be automatically
posted when the invoice is posted
c At the time of payment of the invoice amount, the system carries out a clearing
posting to the cash discount clearing account
d If the invoice is paid after the cash discount payment deadline, the cash discount loss
is posted to a "lost cash discount account"
From the following statements select only the statements which areTRUE in respect
of Payment terms & Cash Discounts :
a Every installment of an installment plan must have its own terms of payment
b The cash discount accounts used in the net procedure are Cash discount revenue
account and the cash discount expense account
c The cash discount accounts used in the gross procedure are Cash discount clearing
account and the Lost cash discount account
d The specification regarding which system is to be used as cash discount base is made
in the global parameters of a company code, in customizing
From the following, select the business transactions which according to you, can be
cross-comapany code transactions:
a Central Procurement
b Central Payment
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
TRUE
TRUE
TRUE
115
115
116
From the following statements select only the statements which areTRUE in respect
of Cross-Company Code transactions :
a In cross company code transactions, the system creates and posts a separate
document in each company code involved
b In order to balance the debits and credits within these documents, the system
generates automatic line items which are posted to clearing accounts, for payables or
receivables
c The documents which belong to one cross-company code transaction are linked by a
common cross-company code transaction number
d In my SAP ERP System, there no specific reports to display cross-company code
transactions as such
116
116
116
116
117
117
117
117
117
118
From the following statements select only the statements which areTRUE in respect
of Cross-Company Code transactions :
a The tax calculated is always posted to the company code of the first item
b To ensure that the tax is posted to the same company code as the invoice, the
invoice item must always be entered first
c Before effecting any cross-company code transaction, the clearing accounts must be
defined
d The clearing accounts cannot be G/L accounts, customer, or vendor accounts
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
118
From the following statements select only the statements which areTRUE in respect
of Cross-Company Code transactions :
a To allow cross company code postings, clearing accounts has to be assigned to every
possible combination of two company codes
b To reduce the number of clearing accounts, you can use just one company code as
the clearing company code
c Posting keys must be assigned to the clearing accounts to identify their account types
118
FALSE
119
From the following statements select only the statements which areTRUE in respect
of Cross-Company Code transactions :
a The document number is a combination of the document number of the first
company code, the first company code number and the fiscal year
b The cross-company code document number is stored in the document header of all
of the documents created for a complete audit trail
TRUE
118
118
119
119
TRUE
TRUE
FALSE
TRUE
119
FALSE
119
d The company codes of a cross-company code transaction should have the same local
currencies
FALSE
120
From the following statements select only the statements which areTRUE in respect
of clearing open items :
a For a transaction to be considered as completed, it must be cleared
b A transaction is cleared only when a clearing posting has been carried out for an item
or group of items, in such a way that the resulting balance of the items is zero
TRUE
120
120
120
120
121
From the following statements select only the statements which areTRUE in respect
of clearing open items :
a A clearing transaction, ironically, does not create a clearing document
b "Posting with Clearing" can be carried out for several accounts, account types, and
for any currency simultaneously
c If automatic payment program is used, "Posting with Clearing" transactions can only
be carried out manually
d The "Account Clearing program" can be used for clearing open items
121
121
121
121
122
122
122
122
From the following statements, select only the statements which according to you
are TRUE:
a The "Account Clearing" function works for any account managed with open items in
the general ledger and in sub ledgers
b Since most of the time, postings do not have to be made to clear items within an
account, the clearing documents usually contain several line items
c
If the items to be cleared belong to different business areas, the system may have to
carry out clearing postings to balance the business areas to zero
122
123
123
123
123
123
a
b
c
d
TRUE
FALSE
TRUE
FALSE
TRUE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
TRUE
FALSE
124
124
124
124
124
125
From the following statements select only the statements which areTRUE in respect
of clearing open items :
a The assignment field of a line item is automatically filled in accordance with the "Sort
Field" entry in the master record when you post
b The assignment field can be a combination of up to 4 fields with a maximum of 18
characters
c If the sort key is set to the cost center in a general ledger master record, then the
assignment field in the general ledger line item displays the number of the cost
center when that particular G/L account is used
d The line item sorting in the line item display and clearing functions is based on the
assignment field
TRUE
TRUE
TRUE
TRUE
From the following statements select only the statements which areTRUE in respect
of clearing open items :
a It is possible to trace the document in Sales Order Management on which the
accounting document is based on, using the reference and assignment field
TRUE
125
125
125
FALSE
TRUE
TRUE
126
126
126
125
126
126
FALSE
FALSE
FALSE
TRUE
In TFIN 52, unit 3, page 125, Figure 47. Can you explain me in the figure how an amount of 700 arises as
Value Adjustment?
Thanks
Reply by: SME Date: 13-08-2011 Time: 16:01:17
Hi Krishnakumar,
Value adjustment is nothing but accumulated depreciation. Hence 700 is debited.
Can you please explain me the Figure 25 in TFIN 52, unit 2, page 66?
Thanks
Reply by: SME Date: 13-08-2011 Time: 15:03:49
Hi Krishnakumar,
In certain cases, an asset that needs to be shifted from one cost center to another or there is an
asset shut down that can have a direct effect on depreciation and also for the purpose of reporting and
valuation needs, Time dependent data is maintained. For example, assignment of an asset to a cost
center (A) for 1st half of the year and cost center (B) in the 2nd half of the year using the help of time
interval by entering the date/period in the asset master record.
In TFIN 52, unit 2, page 65, Can you please explain me what's Evaluation groups and why it is leveled
between 1 and 5?
Thanks
Reply by: SME Date: 13-08-2011 Time: 14:33:28
Hi Krishnakumar,
Evaluation groups are another option for classifying assets for reports or user-defined match
codes. You can use 5 different evaluation groups (four with 4 characters, and one with 8 characters). You
can assign each asset to the appropriate category of the evaluation groups.
More over for the purpose of reporting, the reports carry a selection field in which the evaluation group
must be entered to get the data for the asset classification of the business place.
4. Posted by: S00012649 Date: 13-08-2011 Time: 11:02:22
Dear sir,
In TFIN50 part 2, unit 2, page 47, last second para, can you tell expansion for APC (negative APC Values)
and the meaning for the same.
Thanks
Reply by: SME Date: 13-08-2011 Time: 11:37:26
Dear Krishnakumar
I request you to provide me the Mail ID for clarifying the doubts regarding SAP Certification.
Thanks
Reply by: SME Date: 12-08-2011 Time: 10:26:03
Dear Krishnakumar,
For any queries regarding SAP certification (question pattern, marking system, topics weightage), please
visit www.sap.com/education or else you can also mail to Tulasi Ram at tulasi.ram@sap.com.
Sample questions are available on the website
http://www.sap.com/services/education/certification/schedule/index.epx
6. Posted by: S00012649 Date: 06-08-2011 Time: 14:37:07
Dear sir,
(TFIN50, part 2, unit 3, page 174 in book) could you please explain me, in the figure which amount is to
be dunned..
Reply by: SME Date: 07-08-2011 Time: 06:12:19
Hi Krishnakumar,
With reference to your query, in the Fig: 72 clearing with credit memos or vendor items
If you have chosen to clear the due net debit items with the due net credit items, then as per the figure
given you Dun the remaining 700 with the highest dunning level.
If you have chosen to clear between customer and vendor, as per the figure given, the remaining
balance 500 is dunned with highest dunning level.
7. Posted by: S00012649 Date: 05-08-2011 Time: 09:55:43
Dear sir,
In TFIN50, part 2, unit 1, Fundamentals, I could see that bank master records are created at Client level,
and i can see that "in case of house banks, data such as House bank ID and Communication data are
stored at company code level". This confuses me. Please explain me in detail.
Thanks.
Reply by: SME Date: 05-08-2011 Time: 10:55:33
Dear Krishnakumar,
Bank Master record is created for every bank that is used in the system,(common data/information) and
are stored centrally in the Bank Directory. The records which are created at this level can be used by any
other company codes; hence this is created at client level.
House bank data such as house bank Id, communication data which is company code specific differ from
company code to company code, hence they are stored at company code level.
8. Posted by: S00012649 Date: 04-06-2011 Time: 13:04:43
Can you please explain in detail what a Year-Independent Fiscal year Variant is and the concept of
"indicator -1 or +1?"
Reply by: SME Date: 04-06-2011 Time: 13:38:52
Dear student,
The fiscal year variant is called year-independent: if each fiscal year of a fiscal year variant uses the same
number of periods, and the posting periods always start and end at the same day of the year.
1 calendar year
The posting periods are equal to the months of the year. Therefore a calendar year variant must have 12
posting periods, and we cannot define the beginning and end of period because it always begins on
January 1st and ends on December 31st every year.
2 non-calendar year
The posting periods are not equal to the months of the year. The posting periods need to be defined by
assigning ending dates to each period. A non-calendar year can have between 1 and 16 posting periods.
If the non-calendar year does not start at January 1st the periods of the year which belong to the former
or the coming fiscal year must get an annual displacement indicator (-1, +1)
9. Posted by: S00012649 Date: 04-06-2011 Time: 13:02:45
Dear Sir,
Can you tell me what is a positing period in detail.
Reply by: SME Date: 04-06-2011 Time: 13:16:13
Dear student,
Posting period is a period within a fiscal year, such as a particular month, for which SAP transaction
figures are updated. Every SAP transaction that is posted is assigned to a particular posting period. The
transaction figures are then updated for this period.
Can you please explain me in detail what is Internal number assignment and external number
assignment.
Internal number assignment are assigned by the system, with internal number assignment, the system
always assigns the next number available in the range to the account. With the internal number
assignment, you can display the current number.
External number assignment is entered by the user who creates the record. External numbers may be
alphanumeric. The user chooses the account number. Numbers do not have to be assigned in sequence,
therefore, a current number cannot be displayed.
Also i would like to tell that you should not post multiple questions in the same query. Per query you are
supposed to post only one query. Kindly remember this while posting the query in future.
11. Posted by: S00012649 Date: 07-05-2011 Time: 13:48:59
inTFIN50 - Financial Accounting, Basic Settings - Page 30.
Can you please explain me in detail about Variant Principle and its use.
For e.g. if 1+1+2=4 and this is being repeatedly used in your analysis, then you
1. Define a variant X
2determine the values of the variant x i.e. x=1+1+2
3 Assign the variant to objects ie 3x= 3(1+1+2) = 12
In TFIN50 part 1, Page 205, Figure 87, can you please me the figure in detail .
Thanks
Reply by: SME Date: 23-08-2011 Time: 13:46:20
Hi Krishnakumar,
Active document splitting means document splitting based on the Business
transactions/Transaction variant assigned to the document type and the item category assigned to the
GL account. System determines and does the splitting of each line item in the document, based on the
configuration you have done. You have control over active splitting.
Passive splitting is something that you do not have control over. System takes the document splitting
characteristics from the original document.
Document splitting characteristics for General Ledger Accounting is as relevant as it is for the balance
sheet. If the balancing dimensions in a document do not produce a balance of Zero, the system creates
additional clearing items that ensure zero balance. You can create then balance sheets for these
document splitting characteristics.
Regards,
FISME
Posted by: S00012649 Date: 23-08-2011 Time: 15:17:29
can you please tell me whether one document split comprises of those three steps.
Reply by: SME Date: 24-08-2011 Time: 09:00:43
Dear Krishnakumar,
With reference to your query, a document will comprise of only 2 steps that is, either 1 & 3 or 2 &3. If
you receive a payment against any invoice, it uses passive split along with zero balance indicator to
make the document splitting characteristics zero. For other documents, it processes using customized
splitting rules (rules explained in Figure 89) and zero balance indicator is common for both the splits. If
you still have doubts, kindly propose a date and time convenient to you for adobe session, we will
resolve your doubts.
Regards,
FISME.
Posted by: S00012649 Date: 24-08-2011 Time: 09:19:27
Dear Sir, I clearly understand now, can you please tell me one example document for Active Split. Then
Ill be very clear.
Reply by: SME Date: 24-08-2011 Time: 09:48:31
Dear Krishnakumar,
You can go through Figure 85, wherein you can see the invoice with multiple expense line items debited
to advert. Costs, Purchase Services and input tax and Credited to Vendor (Miller Inc) in entry view. This
is split according to the splitting rule which is shown in General Ledger view. Split according to the
splitting rules defined in customizing is Active Split
Regards,
FISME.
13. Posted by: S00012649 Date: 23-08-2011 Time: 15:20:33
Dear Sir,
In TFIN 50 part 1, page 289, figure 125, can you please explain me the figure in detail.
Thanks
Reply by: SME Date: 23-08-2011 Time: 18:49:15
Hi Krishnakumar,
SAP can post inter-company accounting documents by direct or indirect specification of other
company codes. For example, you can enter a different company code in a line item when posting a
manual journal entry in another company code; or if a vendor invoice is posted in one company code,
you can pay for that invoice from a different company code.
In a cross-company code transaction, the system posts a separate document with its own document
number in each of the company codes. Individual documents are linked by a common cross-company
code number. The system generates line items automatically (receivables and payables arising between
company codes) in order to balance the debits and credits in each document.
Hence, for cross-company code transaction, you create clearing accounts to display receivables and
payables between individual company codes.
Hope this answers your doubt. Kindly close the query if your doubt is resolved.
Regards,
FISME
14. Posted by: S00012649 Date: 25-08-2011 Time: 07:57:23
Dear Sir,
In TFIN 50 part 1, Page 312, Figures 130,131,132. Can you please explain me precisely the difference
between Post with Clearing and Account Clearing with an example because both looks alike but it seems
there is a difference?
Thanks
Reply by: SME Date: 25-08-2011 Time: 11:24:08
Dear Krishnakumar,
With reference to the query, in both post with clearing and account clearing, you can select and clear
multiple open items. Only difference is, In post with clearing, if the total amounted selected open
items is not equal to clearing amount, it allows you to post the difference. for ex. You have clearing
amount 5000 and open items are 4800, you can post the difference of 200, where as in account
clearing, the total amount of open item must be zero, difference not allowed to be posted.
Regards,
FISME.
15. Posted by: S00012649 Date: 25-08-2011 Time: 15:28:04
Dear Sir,
In TFIN 50, part 1, page 341&342, figure 144, Can you please explain me the Figure in detail especially
the last but one bulleted paragraph?
Thanks
Reply by: SME Date: 25-08-2011 Time: 16:21:26
Hi Krishnakumar,
Tolerance limits are defined separately for users (employees) and business partners (customers and
vendors). The system checks both limits when clearing open items. The lowest limit always has priority.
For example: For one of your customers you set a maximum amount of $2 for adjusting the cash
discount amount when a payment difference occurs. For the accounting clerk that processes this
customer account, however, you set a maximum amount of $1. If differences occur when this clerk
clears items from this customer account, the system can adjust the cash discount amount only up to a
maximum of $1.
Hope this explanation clears your doubt. Kindly close the query if your doubt is resolved.
Regards,
FISME
16. Posted by: S00012649 Date: 28-08-2011 Time: 10:39:30
Dear Sir,
In TFIN 50 part 2, page 280, figure 113&115, Can you please explain me in the figures what is old
month/year and new month/year with an example.
Reply by: SME Date: 28-08-2011 Time: 13:19:23
Dear Krishnakumar,
With reference to your query, Old month is nothing but closing of accounts for the month. Say for ex.
January 31, you close the month with postings from HR, MM and SD modules and analyze Profit & Loss
and Balance Sheet for the period and reports are created for January. New month is February 1, the
balances from January will be carried forward to the next month by opening new month, balances of
customers/vendors are transferred and closing stock valuations are transferred from MM.
In Fig. 115, the same procedure is carried out for full year. Kindly revert if you still have doubts.
Regards,
FISME
17. Posted by: S00012649 Date: 29-08-2011 Time: 13:04:46
Dear Sir,
In TFIN52, page 39, figure 12, can you explain me the last 4th paragraph's last line, "It is recommended
that you define as many asset classes as you have assets with different types of valuation"
Thanks
Reply by: SME Date: 29-08-2011 Time: 15:09:04
Hi Krishnakumar,
It is recommended to create as many asset classes possible with different types of valuation is
because when you create an asset master record for a particular asset; this data is automatically copied
from the asset class you specify. By entering the default values, you can reduce the time and effort
needed to create new asset master records.
Kindly close the query if your doubt is cleared.
Regards,
FISME
18. Posted by: S00012649 Date: 29-08-2011 Time: 13:10:47
Dear Sir,
In TFIN52, page 17, figure 6, can you please explain me what is an "Internal Order" and Activity type.
Thanks
Reply by: SME Date: 29-08-2011 Time: 15:48:14
Hi Krishnakumar,
Internal Order is an instrument used to plan, collect, and settle the costs of internal jobs and tasks.
The SAP system enables you to monitor your internal orders throughout their entire life-cycle; from
initial creation, through the planning and posting of all the actual costs, to the final settlement and
archiving.
Activity type are required for internal activity allocation and serve as tracing factors for costs and can be
used to measure the internal activities, to enter them manually, automatically, or indirectly based on
final costs, and to allocate them.
It classifies the specific activities and data structures that are provided by one or more cost centers
within a company.
For example: Number or quantity of units produced, hours, machine productivity, etc.
Regards,
FISME
19. Posted by: S00012649 Date: 29-08-2011 Time: 19:02:12
Dear Sir,
In TFIN 50 part2, page 453, figure 199, can you please explain me what is the Superordinate Org. level
and also the last 3rd paragraph?
Thanks
Reply by: SME Date: 29-08-2011 Time: 19:24:09
Hi Krishnakumar,
Superordinate Org. level is one of the settings in the organizational hierarchy that have been
defined based on the configuration of the systems during closing cockpit procedure. Superordinate Org.
level is the highest of the hierarchy level.
For example: +-------Controlling
+----------Company code
+----------Profit center.
Controlling would be the superordinate Org. level in the hierarchy.
Kindly refer to figure 198 of page 452 for further understanding on Organizational hierarchy.
Kindly close the query if your doubt is cleared.
Regards,
FISME
Posted by: S00012649 Date: 29-08-2011 Time: 19:45:45
Dear Sir,
Thats very clear. can you please tell me the meaning for the term "Initial Node" in the same figure (199)
Regards,
FISME
20. Posted by: S00012649 Date: 29-08-2011 Time: 19:37:21
Dear Sir,
In TFIN50 part 2, page 460, figure 206, Can you please explain me the meaning for the line, the
combination of relationships is managed from the standpoint of the successor.
Thanks.
Reply by: SME Date: 30-08-2011 Time: 08:30:01
Hi Krishnakumar,
Kindly refer to this URL link for better explanation about dependencies and defining it.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/58/f17d41e5051809e10000000a155106/content.h
tm
Kindly close the query if your doubt is cleared.
Regards,
FISME
21. Posted by: S00012649 Date: 29-08-2011 Time: 19:38:03
Dear Sir,
In TFIN50 part 2, page 461, figure 208, Can you please explain me the meaning for Gray: Initial.
Thanks
Reply by: SME Date: 30-08-2011 Time: 08:47:30
Hi Krishnakumar,
The Closing cockpit enables you to create a structured interface for executing transactions and
programs that form part of complex processes, such as closing processes. The structural layout supports
processes within an organizational structure, such as within the company code, as well as scenarios
affecting multiple organizational structures.
Closing cockpit can be used as a tool in the following cases:
a) Activities that recur periodically
b) More than one person responsible is involved
c) The activities are performed within a process that has a fixed chronological sequence
d) The activities need to be supported by a shared, uniform interface for all involved.
e) The status of all periodic activities that needs to be documented and made available for all involved.
Continued.......
Reply by: SME Date: 30-08-2011 Time: 09:01:46
Continued.....
The Closing cockpit enables you to optimize your process flows by using its event-driven organization of
activities, its overview and monitoring options, as well as analysis tools, all of which cover the entire
process.
As per your query on the color code status, The Monitor is one of the Closing cockpit process activities.
It shows a graphical representation of the critical paths as well as the processing periods and processing
sequence with their respective dependencies.
Hope this clears your doubt. Kindly close the query if your doubt is cleared.
Regards,
FISME
In TFIN50 part 2, page 462, figure 209, Can you please explain me the Difference for Processor and
Person Responsible.
Thanks
Reply by: SME Date: 30-08-2011 Time: 09:19:13
Hi Krishnakumar,
List display is one of the closing process in the Closing cockpit structure. It displays all the tasks to
be managed or executed from the respective task list are made available for processing or for
monitoring task progress.
Under the List display, it shows you the detailed view of the,
1) Name and Description, 2) Report name and variant name, 3) Processor and person responsible, and 4)
Start time and end time.
As per your query on Processor and person responsible, Under List display, you can identify the
processor and the person responsible for that particular task in the Closing cockpit process.
Kindly close the query if your doubt is cleared.
Regards,
FISME
23. Posted by: S00012649 Date: 29-08-2011 Time: 19:39:24
Dear Sir,
In TFIN50 part 2, page 463, figure 210, Can you please explain me in detail the following topics:
Thanks
Regards,
FISME
24. Posted by: S00012649 Date: 29-08-2011 Time: 19:40:06
Dear Sir,
In TFIN50 part 2, page 465, figure 212, Can you please explain me the meaning for the line, You can
insert user decisions for testing purposes.
Thanks
Reply by: SME Date: 30-08-2011 Time: 09:59:32
Hi Krishnakumar,
The flow definition is a graphical summary of several steps. A step in the flow definition
corresponds to a task in the task plan, except that the individual step does not appear directly in the
task plan, rather it is displayed in the flow definition, which is included in the task plan.
As with regards to your query, the sentence "you can insert user decisions for testing purpose" means
that you can include your own transaction/program directly in the task plan so that it can be used in
flow definitions(workflows) and you can see the processing status in the monitor.
Kindly close the query if your doubt is cleared.
Regards,
FISME
25. Posted by: S00012649 Date: 29-08-2011 Time: 20:04:18
Dear Sir,
In TFIN50 part 2, page 336, figure 145, Can you please explain me the meaning for the line, Foreign
Currency accounts are valuated by Balance.
Thanks
Reply by: SME Date: 31-08-2011 Time: 07:59:54
Dear Krishnamurthy,
With reference to your query, as per the figure 145, the foreign currency balance sheet accounts are
valuated as part of the foreign currency valuation.
I.e. The balance, that is ,the foreign currency balance of the G/L account managed in a foreign currency,
forms the basis of the valuation for each foreign currency and foreign currency balance sheet account.
Hope this would clear your doubt.
Regards,
FISME
26. Posted by: S00012649 Date: 29-08-2011 Time: 20:05:35
Dear Sir,
In TFIN50 part 2, page 357, figure 151, Can you please tell me why the amount of 600 did not appear in
the OI Analysis.
Thanks
Reply by: SME Date: 31-08-2011 Time: 08:34:04
Dear Krishnamurthy,
With reference to your query, as per the figure 151, adjustment posting is not been made for the
Customer 1 which have an amount of 600.Hence this does not have appeared in OI Analysis.
Hope this would understand.
Regards,
FISME
27. Posted by: S00012649 Date: 29-08-2011 Time: 20:06:51
Dear Sir,
In TFIN50 part 2, page 442, figure 195, Can you please explain me the last 4th paragraph.
Thanks
Reply by: SME Date: 31-08-2011 Time: 09:17:29
Dear Krishnamurthy,
With reference to your query, as per the figure 195, shows you how you define the ledger groups
As per 4th line, when defining the ledger group the Document types must be defined for entry view in
one ledger (Non leading ledger) in customizing in the Ledger Group, so that you can display this one
ledger in the general ledger view.
In short to view the ledger in general ledger view, document types must be defined in any one of the
non leading ledger.
Hope this would clear your doubt.
Regards,
FISME
28. Posted by: S00012649 Date: 29-08-2011 Time: 20:07:25
Dear Sir,
In TFIN50 part 2, page 334, figure 142, Can you please explain me the last 3rd paragraph.
Thanks
Reply by: SME Date: 31-08-2011 Time: 12:14:49
Dear Krishnakumar,
With reference to your query, the figure purely explains about valuation in foreign currency posted to
Controlling (CO). You can define a revenue account from currency valuation as Cost element. If this is
done, in Controlling, if there is revenue from valuation of foreign currency, the cost will be reduced in
the CO object, with reduction in the payables (vendors reconciliation a/c). The cost element 230010
will not show any balances because the revenue has been transferred to Controlling.
Regards,
FISME.
29. Posted by: S00012649 Date: 29-08-2011 Time: 20:08:03
Dear Sir,
In TFIN50 part 2, page 335, figure 143&144, in the figure 144, I could see that valuation difference is 480
local currencies that posted to Exchange rate Diff Account in the local Currency itself. But in the previous
figure 143, last Para says the system posts the account entries for realized exchange rate diff in foreign
currency during the OI clearing. Please clarify me.
Thanks
Fig 143, explains about the account entries for realized exchange rate differences in foreign currency
during the open item clearing (line item wise), that is during receiving/making the payment whereas fig.
144 explains the valuation of foreign currency Balance Sheet accounts as a whole. If you have 10 foreign
customers, whole balance will be valuated and difference will be debited to unrealized gain/loss on
foreign currency valuation and credited to balance sheet adjustment account on key date and reversed
on the first day of the next month.
In Fig 143, you are evaluating the foreign currency during payment, hence the accounts debited is
realized loss/gain on FCV. For ex. Customer balance is say 1000 eur. and value in Foreign currency on
payment date is 800. You receive payment of 800 eur. There is a loss of 200 eur. Entries will be Bank
a/c. dr. 800, Loss a/c. dr. 200, customer a/c Cr.1000.
Reply by: SME Date: 31-08-2011 Time: 12:27:03
... Continued
If your doubt is clear, kindly close the query at your end.
Regards,
FISME
30. Posted by: S00012649 Date: 30-08-2011 Time: 11:24:16
Dear Sir,
In TFIN52, page 90, figure 34, can you please explain me the last second para, especially the meaning of
capitalization of goods or services.
Thanks
Reply by: SME Date: 30-08-2011 Time: 11:57:34
Hi Krishnakumar,
Capitalization of goods and services means to turn a cost into an asset rather than expense. For
example, costs for business startup are considered long term costs, rather than expenses for only one
year, so they are capitalized. If a cost is capitalized, it shows up on the balance sheet as an asset.
Regards,
FISME
31. Posted by: S00012649 Date: 30-08-2011 Time: 11:37:47
Dear Sir,
In TFIN 52, page 100, figure 45, can you please explain me the figure in detail? Mainly Im confused with
the Invoice receipt.
Thanks
Reply by: SME Date: 30-08-2011 Time: 12:14:02
Hi Krishnakumar,
Kindly refer to the following URL link for better understanding and explanation over the concept of
Goods receipt and Invoice receipt in SAP.
http://help.sap.com/saphelp_46c/helpdata/en/4f/71e70a448011d189f00000e81ddfac/content.htm
In TFIN52, page 138, figure 51, can you please clarify me the relevance between the figure name and the
content of the figure? It seems like Intercompany transfer but given is Automatic intracompany asset
transfer.
Thanks
Reply by: SME Date: 30-08-2011 Time: 15:20:19
Hi Krishnakumar,
You were right. The figure 51 of page 138 is actually Intercompany Asset transfer. The figure name
is a typo error. Good to know that you understand the concepts well.
Kindly close the query if your doubt is cleared.
Regards,
FISME
33. Posted by: S00012649 Date: 31-08-2011 Time: 12:14:30
Dear Sir,
In TFIN52, page 178, figure 66, can you please explain me calculations of the tables in the figure.
Thank You
Reply by: SME Date: 31-08-2011 Time: 14:26:06
Dear Krishnakumar,
In Fig.66 says, an asset was acquired and it's useful life was assumed as 5 years. After 2 years, you
realized its useful life is only 3 years. If you use depreciation calculation without the option of a Timedependent definition of the change, as acquisition year is ended, only 2000 is charged as depreciation
(10000 / 5 years) for first year. As second year is still open and you know the asset has only 3 years
useful life, remaining 8000 is distributed among 2 years i.e., 4000 each.
If you use time-dependent parameters with SAP, the system will take 2000 each for first and second
year and balance 6000 completely is charged for 3rd year.
Regards,
FISME
34. Posted by: S00012649 Date: 31-08-2011 Time: 12:24:35
Dear Sir,
In TFIN52, page 207, figure 75, can you please clarify me whether the number range interval is Internal
number assignment or external number assignment for document type here, because in book no such
details (in figure, it seems internal no. assignment) provided but in the e-learning(TFIN52>Periodic
processing and valuation>Page 30) it says external number assignment.
Also can you please tell me whether these types of questions can come for certification, if so, how we
should prepare, only book content is enough or this e-learning content is also needed.
Thanks
Reply by: SME Date: 31-08-2011 Time: 13:55:12
Dear Krishnakumar,
Please kindly try to understand the concept of assigning internal or external document number range
and its effects on the documents. You need not worry about the difference between the slides and
book. Just understand, if external number assignment is selected, you can give the number and if
internal is selected, system generates the numbers.
Regards,
FISME
Reply by: SME Date: 31-08-2011 Time: 14:36:11
Dear Krishnakumar,
The handbook what you are having is the Bible, Geeta and Quran for you. Just read what is there in the
book, that is very much sufficient for your Certification. These type of questions may not come. The
questions will be from your books only. Do not worry too much, read the books, be confident and you
will succeed in your Certification exam. We wish you very best of luck for your exams.
Regards,
FISME
35. Posted by: S00012649 Date: 31-08-2011 Time: 12:34:56
Dear Sir,
Can you please confirm me whether the 12th Unit in the book TFIN50_2 and 13th Unit in the book
TFIN52 are there for Certification. Because these are not found in the e-learning system.
I am asking you because when i mailed this same query to tulasi.ram@sap.com, no response till now.
Please clarify me regarding this as 02.09.2011 is the last day for me to access e-learning.
Thanks
With reference to your query, we regret for the inconvenience caused to you. Please go to the link
provided to you and under that you will find TFIN50 Financial Accounting I dated 06.05.2010, you can
press start now and in the subsequent screen you can press table of contents. You can see all the topics
of TFIN50_1 and 2 in that. You also have TFIN52_92 Financial Accounting II in trainings. Kindly check.
Regards,
FISME
36. Posted by: S00012649 Date: 06-08-2011 Time: 14:37:07
Dear Sir,
(TFIN50, part 2, unit 3, page 174 in book) could you please explain me, in the figure which amount is to
be dunned...
With reference to your query, in the Fig: 72 clearing with credit memos or vendor items
If you have chosen to clear the due net debit items with the due net credit items, then as per the figure
given you Dun the remaining 700 with the highest dunning level.
If you have chosen to clear between customer and vendor, as per the figure given, the remaining
balance 500 is dunned with highest dunning level.
If your query is been resolved, kindly close the query at your end.
Regards
37. Dear Sir,
Posted by: S00014309 Date: 03-09-2011 Time: 13:31:22
Hi,
In TFIN52, page 361, figure 137, can you please tell me in the figure, what is the 555 and 333
corresponds to..
Thanks
Krishnakumar
Reply by: SME Date: 04-09-2011 Time: 09:10:01
Hi Krishnakumar,
In the figure 139 of page 363 - Noted items, 555 and 333 is just an amount for both the
customer invoice. As you can see the total amount of 888 in the reconciliation account in the same
figure.
The amount of 10000 is just a down payment request (noted item) and is only a reminder and has
no bearing on customer invoice balance.
Kindly close the query if your doubt is cleared.
Regards,
FISME
In TFIN52, page 367, figure 144, can you please clarify me in the last point (4) last sentence, whether a
Special G/L account is used or not since in book it is no, where as in e-learning (page 24 of unit Special
G/L Transactions) it is yes.
Thanks
Krishnakumar
Reply by: SME Date: 04-09-2011 Time: 09:54:59
Hi Krishnakumar,
When the receivables are doubtful or disputed, they are entered as individual value adjustments
and you use special GL account (Individual Value Adjustments for Receivables). Only when you are able
to ascertain that the receivable is uncollectable, it is posted to the Expenses for uncollectible receivables
account hence no special GL account is used.
The explanation given in the e-learning is only an error. But the rest of the explaination was correct.
The error in the e-learning slide is regretted.
Kindly close the query if your doubt is cleared.
Regards,
FISME
39. Posted by: S00014309 Date: 04-09-2011 Time: 08:32:23
Hi,
In TFIN50_2, Unit 1, can you please give me an example for Translation ratios.
Thanks
Krishnakumar
Reply by: SME Date: 04-09-2011 Time: 13:38:20
Hi Krishnakumar,
Translation ratios are ratios defined for each currency pair and each exchange rate type, for
translating one currency into another using exchange rate. For example, say, you have two currencies,
USD and JPY and, say, the translation ratio between the two is 1:100. The exchange rate, in this case, is
represented as 1USD=100x0.0120JPY in exchange rate table, in SAP system. Please note that a higher
translation ratio is maintained due to one currency being weak in comparison to other.
Kindly close the query if your doubt is cleared.
Regards,
FISME
40. Posted by: S00014309 Date: 17-09-2011 Time: 12:42:09
Hi,
In TFIN50_2, page 328, figure 136, can you please clarify me in the figure, the line no need to act for
GCC Key word: Lowest value principle
Thanks
Reply by: SME Date: 19-09-2011 Time: 05:21:50
Dear Krishnakumar,
With reference to your query, basically you need to do foreign currency valuation for international
valuation areas only (e.g.: IAS/IFRS/U.S GAAP) and not for local valuation area for the rules of German
Commercial Code., if the valuation is run with lowest value principle. This explanation is for Fig.136.
When there is no valuation carried out for local valuation area, you need not post any amount and post
only "0 for the corresponding valuation area.
This is what, is explained in the last paragraph for
fig.138.
This reply answers you both queries bearing no.00059016 and 00059017.
Regards,
FISME
41. Posted by: S00014309 Date: 17-09-2011 Time: 12:43:20
Hi,
In TFIN50 part 2, page 330, figure 138, Can you please explain me the last 3rd paragraph, The original
customer document updates the amount 0 for the corresponding valuation area
Thanks
Reply by: SME Date: 19-09-2011 Time: 05:22:12
Dear Krishnakumar,
With reference to your query, basically you need to do foriegn currency valuation for international
valuation areas only (eg: IAS/IFRS/U.S GAAP) and not for local valuation area for the rules of German
Commercial Code., if the valuation is run with lowest value principle. This explanation is for Fig.136.
When there is no valuation carried out for local valuation area, you need not post any amount and post
only "0" for the corresponding valuation area.
This is what, is explained in the last paragraph for
fig.138.
This reply answers you both queries bearing no.00059016 and 00059017.
Regards,
FISME
42. Posted by: S00014309 Date: 17-09-2011 Time: 12:45:09
Hi,
In TFIN50_2, page 346, figure 148, can you please explain me the calculations.
Thanks
Reply by: SME Date: 19-09-2011 Time: 05:33:08
Dear Krishnakumar,
In Value adjustment key 01, the debit percentage is 2% if the customer open item is overdue by 30 days,
and 3% for 60 days. Customer A has open item 2000 which is overdue by 30 days and Value adjustment
should be 2% i.e., 60 and for item 10000 which is overdue by 60 days, the value adjustment should be
3% i.e., 300.
Do not get confused by the amount 20 & 200 shown in the figure.
Regards,
FISME
43. Posted by: S00014309 Date: 17-09-2011 Time: 14:38:20
Hi,
In TFIN 50_2, page 398, figure 170, can you please explain me the term Summarization and why it is
used.
Thanks
Reply by: SME Date: 18-09-2011 Time: 14:24:59
Hi Krishnakumar,
Summarization is nothing but a type of document lines that are generated in the accrual engine.
You define if and in what form you want to summarize data when transferring accrual postings to
Accounting.
There are 3 types of summarization where one can make the settings for posting control in accrual
engine.
1) No Summarization: A document line is created in the Accounting document for each accrual item and
accrual type in the Accrual Engine.
2) Summarization to accrual object level: As few document lines as possible are generated in Accounting
for each accrual object.
3) Maximum summarization: When documents are created for Financial Accounting, the maximum
amount of Accrual Engine data is summarized for per accounting document. Independently of this,
further summarizations can be activated in the individual receiver components in Accounting to which
the documents are posted.
Kindly close the query if your doubt is cleared.
Regards,
FISME