Documente Academic
Documente Profesional
Documente Cultură
General description
The SKF MVH equipment is used to precisely
analyse the structure-borne noise and vibration of deep groove ball bearings, angular
contact ball bearings, self aligning ball bearings, spherical roller bearings, etc. The machines are also used as the SKF reference
equipment for these measurements.
MVH 90C/200C
The MVH 90C/200C equipment can
be described as follows:
An extremely precise slidingbearing spindle, which drives the
inner ring of the bearing under
test.
A pneumatic axial loading unit
with adjustable test load.
The two-hand operation starts
the automatic test cycle: the axial
loading unit applies an axial load
to the outer ring and moves the
bearing against the testing spindle, and the pickup is applied on
the stationary bearing outer ring.
The noise is measured (freely
programmable measuring time),
analysed and displayed. Once
Machine description
1
2
3
4
5
1 ........LCD monitor
2 ........MEB 95 measuring electronics
3 ........Keyboard with touchpad
(mouse)
4 ........Measuring mechanics
5 ........Control panel
6 ........Pneumatics
7 ........Electrical cabinet
QTC product groups: Special Vibration Grease tester Dimension Optics Laser marking Waviness Mechatronics
MVH 90C/200C
Pickup
Axial load
Mandrel
Axial load
Technical specifications
Mechanics
MVH 90C
MVH 200C
Resetting time
About 5 min.
Spindle speed
1 800 rpm
700 rpm
Driving motor
3 phases, 0,75 kW
Tools
Paint
Electronics
Measuring electronics
Pickup
Software
FPM, operating system Windows NT; for details see datasheet FPM
Loudspeaker (option)
IP 53
MVH 200C
Dimensions
HxWxD
Weight
Requirements
Electrical system
Pneumatic system
Air pressure
Calibration tools *)
MVH 90C
MVH 200C
Alignment tools
To calibrate the alignment of the loading unit and the spindle axis
Tachometer
VK1
VK2
SKF 2007
MVH 90/200C K/2008
Printed in Austria
QTC product groups: Special Vibration Grease tester Dimension Optics Laser marking Waviness Mechatronics
MVH 90C/200C