Documente Academic
Documente Profesional
Documente Cultură
amoiywo (TechnicalUser)
(OP)
5 Apr 13 05:00
BO/eniq is an Ericsson software that extracts info from the MSC for KPI readings
amoiywo (TechnicalUser)
(OP)
5 Apr 13 07:22
The command that is in that document is for monitoring cell traffic.
I work for a network service provider in Kenya. We have only 2 MSCs (2G) that work in
tandem through load sharing. We have been asked to generate a KPI that monitors
traffic through the MSCs. Our MSCs have numerous routes interconnecting them thus
making it extremely tedious to monitor traffic per route.
What would you recommend?
What do you want to measure? CO lines, Groups, Extension etc. There are different
commands to initiate the measurements.
///doktor
amoiywo (TechnicalUser)
(OP)
4 Apr 13 06:31
Traffic through the MSC over a certain period. plldp; seems to show me the call
attempts/details
amoiywo (TechnicalUser)
(OP)
4 Apr 13 08:11
Please let me know of the commands you are familiar with. Thanks
TRROI:ROU=XXX,TIMEI=HH-MM,TIMEE=HH-MM,DATE=YYYY-MM-DD&&YYYY-MM-DD;
TIMEI is the star ttime and TIMEE is the end time.
HH hours.
TT minutes.
YYYY - year (2013)
MM month
DD date.
----Traffic recording on a hunt group.
TRPBI:GRP=XXX,TIMEI=HH-MM,TIMEE=HH-MM,DATE=YYYY-MM-DD&&YYYY-MM-DD;
----Printout:
TRDIP:
Check the MENO number. The TRDIP gives the list over traffic recordings.
TRREP:MENO=X,PERIOD=2,DATE=YYYY-MM-DD&&YYYY-MM-DD;
----Operator:
TROPI:CORG=XX,TIMEI=HH-MM,TIMEE=HH-MM,DATE=YYYY-MM-DD&&YYYY-MM-DD;
Operator Manned time:
TROMI:CORG (or DIR)=XX,TIMEI=HH-MM,TIMEE=HH-MM,DATE=YYYY-MM-DD&&YYYY-MMDD;
///doktor
Operator measurement are "heavy" to understand, but very detailed and OK to get
knowledge about.
Traffic recordings are initaited the day before the measurements should begin and they
can run for many years.
e.g.
TRPBI:GRP=4711,TIMEI=08-00,TIMEE=17-30,DATE=2013-05-04&&2023-12-31;
///doktor
amoiywo (TechnicalUser)
(OP)
5 Apr 13 02:53
Thanks allot. Let me try them out then i'll let you know if I need some more assistance.
Your assistance was of great help.
amoiywo (TechnicalUser)
(OP)
5 Apr 13 03:24
Would you happen to know of an alternative through the BO? This time by extracting the
traffic usage on the network.
///doktor
amoiywo (TechnicalUser)
(OP)
5 Apr 13 04:59
HI,
I have done some research on how to extract traffic flow from the MSC. A three set
command is able to extract traffic data from the MSC over a certain time period.
TRDMI:MP=77[,IO=OWN&FILE][,R2&R1];
The command prepares for recording, that is, reserves
measuring programs, specifies output format/device and
type of recording.
TRTSI:MP=77,NRP=2&3,RPL=15&20,DATE=010217,NDAYS=3,NWEEKS=2,TIME=1200&1
400;
This command defines the time schedules of a MP.
TRDIP;