Documente Academic
Documente Profesional
Documente Cultură
PRELIMINARY
Title page
W-CDMA
Alcatel-Lucent 9300 W-CDMA Product Family | V7.1
WMS Scrambling Code Plan Update (NRP)
NN-20500-086
ISSUE 9.02
NOVEMBER 2009
PRELIMINARY
Alcatel-Lucent Internal
Proprietary Use pursuant to Company instruction
PRELIMINARY
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright 2009 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
ot to be used or disclosed except in accordance with applicable agreements.
Trademarks
PRELIMINARY
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Alcatel-Lucent Internal
Proprietary Use pursuant to Company instruction
............................................................................................................................................................................................. ix
ix
...................................................................................................................................................................... ix
ix
....................................................................................................................................................................... ix
ix
Intended audience
......................................................................................................................................................................... ix
ix
Supported systems
......................................................................................................................................................................... x
x
PRELIMINARY
Contents
........................................................................................................................................................................... x
x
Related information
..................................................................................................................................................................... xi
xi
Document support
....................................................................................................................................................................... xi
xi
Technical support
......................................................................................................................................................................... xi
xi
......................................................................................................................... 2-1
........................................................................................................................................................................ 2-1
2-1
Procedure preparation
Overview ....................................................................................................................................................................................... 3-1
3-1
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
iii
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
Context Diagram
3
........................................................................................... 1-1
PRELIMINARY
Contents
...................................................................................................................................................................................................................................
Procedure preparation
4
.............................................................................................................................................................. 3-1
3-1
....................................................................................................... 4-2
................................................................................................................................. 4-3
......................................................................................................................................... 4-4
4-4
.............................................................................. 4-6
............................................................................ 4-9
......................................................................................................................... 4-11
Reconfiguration Activation
Overview ....................................................................................................................................................................................... 5-1
5-1
Reconfiguration Activation Pre-Checks
Reconfiguration Activation in WMS
............................................................................................................................ 5-2
.................................................................................................................................. 5-3
5-3
.......................................................................................................................... 5-7
Reverse Procedure
Overview ....................................................................................................................................................................................... 6-1
6-1
Reverse Procedure
..................................................................................................................................................................... 6-2
6-2
PM and FM Impacts
Overview ....................................................................................................................................................................................... 7-1
7-1
PM and FM Impacts
................................................................................................................................................................. 7-1
7-1
PRELIMINARY
Glossary
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
iv
6-1
Fallback Workorder Activation for RCs (C-ode Part) in case of Fallback failure
...................... 6-4
6-2
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
v
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
List of tables
PRELIMINARY
PRELIMINARY
2-1
4-1
......................................................................................... 2-2
............................................................................................ 4-2
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
vii
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
List of figures
PRELIMINARY
PRELIMINARY
PRELIMINARY
Purpose
Issue date
9.02
ovember 2009
Preliminary issue
9.01
October 2009
one
Other changes:
one
Intended audience
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
ix
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
Supported systems
ode B
RC
WMS
WPS
Start with the first chapter and work through the manual to the end. Once you have done
this, you will have carried out the re-configuration procedure in the proper sequence.
Prerequisites
Vocabulary conventions
one.
Conventions used
PRELIMINARY
one.
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
...................................................................................................................................................................................................................................
Related information
For information on subjects related to the content of this document, refer to the following
documents:
PRELIMINARY
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
one of the following telephone numbers:
Technical support
For technical support on the product, contact your local Alcatel-Lucent customer support
team. See the Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/)
for contact information.
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (https://support.lucent.com).
How to comment
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
xi
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
PRELIMINARY
1oadmap to Configuration
R
Management
documentation
Overview
Purpose
1-1
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
1-1
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
1-2
PRELIMINARY
The Scrambling Code plan update procedure aims at updating a scrambling code plan on
existing cell and at propagating the scrambling code changes on related neighboring links
in the UMTS network.
General Description
The UMTS FDD Cell (FDDCell) updated by XML file import in WPS ACCESS
The UMTS FDD neighboring links (UMTSFDDeighbouringCell) updated by
autocorrective Check.
Note: As WPS Access is mono ROC oriented, the procedure can be applied only on one
ROC. So if neighboring links towards cells belonging to others ROCs are updated, then
the same activity needs to be performed on each ROC.
Context Diagram
The following diagram displays the different steps to be conducted to perform the new
Scrambling Code plan introduction.
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
2-1
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
Context Diagram
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
2-2
PRELIMINARY
Procedure preparation
3
Overview
Purpose
This chapter describes the procedures and preparation required to perform them.
Contents
Procedure preparation
3-1
Procedure preparation
Prerequisites
The RP: "Scrambling Code plan update", described in this document applies only if all
of the following conditions are verified:
The etwork and the OMC are up and running without any problem. (Alarm, OMC
MIB State, Synchronization State, etc.)
All ode B and FDDCell objects referred by the new Scrambling Code plan are
already declared in the host RCs
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
3-1
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
Procedure preparation
Procedure preparation
...................................................................................................................................................................................................................................
The configuration files coming from the Cell Planning Tool can be compatible with
WPS ACCESS CP XML format, as specified inRelated information (p. xi) [R4] or
with the CM XML format, as specified in Related information (p. xi)[R2].
ote: It is recommended to use the CP XML format (specified in Related
information (p. xi)[R4]). This Snapshot format provides extra identifiers for the
Objects and does not require specific UMTS topology information (RC, ode B)
that are required in the CM XML format. evertheless some prerequisites on the
etwork View are required in order to be able to import a CP XML file in WPS
ACESS with the Cell Planning Import Wizard:
There must be a unique definition of GSMCell within the etwork
The Cell Planning Id for GSMCell, BTSCell or OneBTSCell, AntennaAccess,
AntennaSystem must be unique over the entire network
Limitations
PRELIMINARY
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
3-2
Procedure preparation
...................................................................................................................................................................................................................................
Mean Time
This chapter summarizes the duration given for each step of the procedure. evertheless,
as the timing depends on too many heterogeneous parameters (Hardware Configuration,
Software Configuration, Size of the etwork, Transmission etwork performance, etc.)
and then might significantly vary from a configuration to another one, the times given in
this chapter are only for information and planning purpose.
PRELIMINARY
Procedure preparation
ote: Durations are given for the modification of the scrambling code for a network
with 7 RCs, 860 BTSEquipment and 2540 Cells.
Scrambling code plan update under WPS Access
Step
Procedure
Duration
1 (optional)
30 minutes
Few minutes
Few minutes
Few minutes
Few minutes
Step
Procedure
Duration
6(optional)
< 1 hour
Step
Procedure
Duration
35 minutes
Step
Procedure
Duration
8 (optional)
< 1 hour
Reconfiguration
Activation Pre-Checks
Reconfiguration
Activation in WMS
Reconfiguration
Activation
Post-Checks
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
3-3
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
Procedure preparation
Procedure preparation
...................................................................................................................................................................................................................................
Impacts
This table summarizes the impacts on the service given for each step of the procedure.
Main Steps
Impact on Service
one
one
one
PRELIMINARY
(*) Impacted FDD Cells are locked then unlocked one by one sequentially. Then in case
of Handover failure calls might be dropped.
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
3-4
PRELIMINARY
Overview
Purpose
This activity aims at defining the provisioning data required for the Scrambling Code plan
update in the live network. This data consists of a XML file that contains the
modifications to be applied on the UMTS FDD Cells.
Contents
Scrambling Code Plan Update under WPS Access
4-2
4-3
4-4
4-6
4-9
4-11
Exporting Workorders
4-13
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
4-1
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
...................................................................................................................................................................................................................................
This activity aims at defining the provisioning data required for the Scrambling Code plan
update in the live network. This data consists of a XML file that contains the
modifications to be applied on the UMTS FDD Cells.
DESCRIPTION
The following figure provides an overview of the steps to follow in order to provide the
OMC team with the relevant data set required to implement the updated Scrambling Code
plan:
Figure 4-1 Data Generation Scrambling Code Plan Update
PRELIMINARY
The procedure that follows is derived from the preceding figure, and gathers all the steps
and notes that should be followed to implement an updated Scrambling Code plan.
Step
Procedure
1 (Optional)
Importing a ew Scrambling Code Plan Under WPS ACCESS (p. 4-6)
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
4-2
...................................................................................................................................................................................................................................
Step
Procedure
eighboring Target Cell Consistency Check under WPS Access (p. 4-9)
PRELIMINARY
As the result of these steps, the Workorder (CM XML) file which contains the updated
Scrambling Code plan information is available.
CP XML Interface OVERVIEW
WPS ACCESS provides a specific interface for Cell Planning Tools based on XML
format, named CP XML, and described in Related information (p. xi) [R4].
This Specific format allows the user to use different identifiers for the Cell Planning
Objects that the ones defined in CM XML format described in Related information
(p. xi) [R2] and to be independent from the Topology (RC, ode B).
In WPS ACCESS, a CP XML import Wizard allows the user to import the CP XML files.
This Wizard provides 2 options of import depending on the selection of the "Delete
un-impacted neighbouring links" field:
eighboring Target Cell Consistency Check under WPS Access (p. 4-9)
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
4-3
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
...................................................................................................................................................................................................................................
This step details how to proceed with WPS ACCESS and the main server to import a
view of the current network configuration into WPS ACCESS if the WPS ACCESS view
is not up-to-date.
This is an optional, but recommended step. You can bypass it if you are sure that your
WPS ACCESS view is synchronized with the network. In this case, please go to the next
step.
Once the CM XML export is performed, "no on line" modifications can take place on the
target E(s) until the end of the overall procedure in order to guarantee that the initial
view, on which the procedure is based, is synchronous with the Main server MIB.
Input parameters
one
Initial status
WPS ACCESS is installed and ready to be used. The template files are imported.
Duration
Impact on service
one.
Procedure
...................................................................................................................................................................................................
PRELIMINARY
Export from the Main server (Global UTRA export) the XML file describing the
network (If required transfer the file to a WPS ACCESS PC directory).
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
4-4
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................
PRELIMINARY
3. Click Browse
4. Select the XML file exported step 1 and Click Open
5. Click Next
6. If a part of the snapshot need to be excluded Click Edit Filter Choose Objects to
import and Click Next otherwise Click Next
7. Select "o, proceed without saving" and click Start
...................................................................................................................................................................................................
Troubleshooting
At this step, you have a Workspace with an Initial Snapshot describing your current
network.
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
4-5
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
...................................................................................................................................................................................................................................
This step details how to proceed with WPS ACCESS in order to import the new
Scrambling Code plan.
Input parameters
All Design parameters regarding the new Scrambling Code plan need to be provided to
the Application Engineer by the etwork Designers, i.e.
Initial status
Under WPS ACCESS, a Workspace describing the current configuration of your network
is available. Templates files, RRM tree are imported.
Duration
PRELIMINARY
one.
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
4-6
...................................................................................................................................................................................................................................
If the ew Scrambling Code Plan is provided through a CP XML Snapshot file:
...................................................................................................................................................................................................
Under WPS ACCESS, create a new Workorder and renames it (for example: "Scrambling
Code plan Import") as described in Related information (p. xi) [R3].
PRELIMINARY
If the ew Scrambling Code Plan is provided through a file in CM XML format as a
workorder:
...................................................................................................................................................................................................
3. Click Browse
4. Select the XML file and click Open
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
4-7
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
1. From the file menu launch the Import and Export wizard.
2. Select "Import Workorders" and click Next
PRELIMINARY
...................................................................................................................................................................................................................................
5. Click Next
6. Select "o, proceed without saving" and click Start
...................................................................................................................................................................................................
E....................................................................................................................................................................................................................................
N D O F S T E P S
If the ew Scrambling Code Plan is provided through a file in CM XML format as a
snapshot:
...................................................................................................................................................................................................
E....................................................................................................................................................................................................................................
N D O F S T E P S
Troubleshooting
In case of errors, contact your local Engineering representative and correct errors
manually or require a new input.
PRELIMINARY
Final Status
At this step, the new Scrambling Code plan is propagated under the FDD Cells impacted
under the host RC(s).
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
4-8
...................................................................................................................................................................................................................................
The procedure details how to propagate the new Scrambling Codes from the FDDCell to
the neighboring Target Cells by using a check with "Autofix" option.
PRELIMINARY
Input paramters
one.
Initial status
one.
Procedure
...................................................................................................................................................................................................
Under WPS ACCESS, create a new Workorder and rename it (for example: "target cell
consistency") as described in Related information (p. xi)
...................................................................................................................................................................................................
From the etwork Object, launch the checker as described in Related information
(p. xi) [R3].
...................................................................................................................................................................................................
EI_UMTS_42
EI_UMTS_51
EI_UMTS_55
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
4-9
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
In the category "neighbouring", enable the following check "Target Cell Consistency" and
select "Autofix"
PRELIMINARY
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Errors corresponding to the new Scrambling Code plan on the neighbouring Links will
appear in the Check Session report.
...................................................................................................................................................................................................
Check that no error appears in the Check Session report. (ote: if you are warn that you
have reached the maximum number of displayed error allowed by the System, repeat step
7 until no error appears)
E....................................................................................................................................................................................................................................
N D O F S T E P S
Troubleshooting
In case of errors, contact your local Engineering representative and correct errors.
Final Status
PRELIMINARY
At this step, you have Scrambling Code plan up to date at FDD Cells side but also
propagated into the related eighbouring FDD Cells.
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
4-10
...................................................................................................................................................................................................................................
PRELIMINARY
Input paramters
one.
Initial status
one.
Procedure
...................................................................................................................................................................................................
Under WPS ACCESS, create a new Workorder and rename it (for example: "consistency
checks") as described in Related information (p. xi) [R3]
...................................................................................................................................................................................................
Launch checks from the network as described in Related information (p. xi) [R3]
...................................................................................................................................................................................................
In case of error, contact your local Engineering representative and correct the reported
errors.
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
4-11
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
Troubleshooting
PRELIMINARY
PRELIMINARY
...................................................................................................................................................................................................................................
Final Status
At this step, you have the new Scrambling Code plan up to date under WPS ACCESS.
The configuration is error-free.
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
4-12
Exporting Workorders
...................................................................................................................................................................................................................................
Exporting Workorders
Purpose
This procedure details how to generate the Workorder (CM XML) file, which describe
only the modified Es between the initial and the final network configuration.
This procedure enables to speed up the whole process, by importing on the main server
only the relevant modifications to apply.
PRELIMINARY
Input paramters
one.
Initial status
one.
Procedure
...................................................................................................................................................................................................
Under WPS ACCESS, from the Workorders Menu select "Merge etwork Changes"
...................................................................................................................................................................................................
Select an option to save your Workspace, if needed enter a new Workspace ame, and
Click Run
...................................................................................................................................................................................................
In the Workorders folder select the "Merge" Workorder, right click and click Export
workorder (choose "on local file system" or on "live server repository")
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
4-13
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
Exporting Workorders
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select "HOST" then the Username and Password (of the server)
Browse in the folders and give a name to the file
Click OK
E....................................................................................................................................................................................................................................
N D O F S T E P S
Troubleshooting
PRELIMINARY
At this step, the Result_folder contains the Workorder (CM XML) file named
Filename.xwo which describes only the modifications. This file will be used for the
activation. If the reverse procedure needs to be applied, the file named Filename_reverse.xwo in the Result_folder will be used.
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
4-14
PRELIMINARY
Reconfiguration Activation
5
Overview
Purpose
Contents
Reconfiguration Activation Pre-Checks
5-2
5-3
5-7
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
5-1
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
Reconfiguration Activation
...................................................................................................................................................................................................................................
The etwork and the OMC are up and running without any problem. (Alarm, OMC
MIB State, Synchronization State, etc.)
Calls can be achieved on the impacted RC
The new scrambling code plan is ready to be activated: Workorder is generated...
Check that no impacting Alarms exist (See Related information (p. xi) [R5] and [R7])
...................................................................................................................................................................................................
Launch checks from the network as described in Related information (p. xi) [R3]
...................................................................................................................................................................................................
E....................................................................................................................................................................................................................................
N D O F S T E P S
Final Status
The etwork and the OMC are up and running without any problem. (Alarm, OMC MIB
State, Synchronization State, etc.)
The impacted RC(s) is (are) up and running
PRELIMINARY
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
5-2
...................................................................................................................................................................................................................................
For all the impacted RCs, this activity will lead to activate the Workorder describing the
reconfiguration through the activation manager mechanism.
PRELIMINARY
Reconfiguration Activation
Input parameters
The etwork and the OMC are up and running without any problem. (Alarm, OMC MIB
State, Synchronization State, etc.).
All the Workorder files (Filename.xwo and Filename_reverse.xwo) generated by WPS
ACCESS have been transferred to a /Result_folder Main Server directory as described in
Related information (p. xi) [R5].
Duration
Impacted FDD Cells are locked then unlocked one by one sequentially. Then in case of
Handover failure calls might be dropped.
Procedure
...................................................................................................................................................................................................
From the WMS client menu bar, select Configuration -> Sessions Manager.
Result: The Sessions Manager window appears.
...................................................................................................................................................................................................
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
5-3
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
Reconfiguration Activation
...................................................................................................................................................................................................................................
In the Create Session window - Creation parameters pane, enter a <Session Name>.
...................................................................................................................................................................................................
The Create Session window - Excluded odes pane appears and details, for each
impacted node, activation details and impacted objects.
Select the node(s) to be excluded, if needed.
...................................................................................................................................................................................................
Click Launch.
Result: The Create Session window closes and the details of the created session are
displayed in the Sessions Manager window.
...................................................................................................................................................................................................
In the "Sessions Manager" window Click Summary for session name and check the
Activation Status of the nodes: RC nodes should be in "Validated" state
Check the validation report of each node in the summary section:
Select a RC in the table and click here the hyperlink to display the HTML validation
report.
...................................................................................................................................................................................................
PRELIMINARY
After session creation completion without errors, in the "Actions for session name" tab
click Activation:
When all tasks are completed, in the "Sessions Manager" window Click Summary for
session name to check that all nodes are activated.
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
5-4
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................
10
From the "Sessions Manager" window, in the Session List Right click session name and
in scroll down menu select "Terminate" in order to delete the session.
E...................................................................................................................................................................................................
N D O F S T E P S
PRELIMINARY
Reconfiguration Activation
ote: After terminating the session if you want to restore the initial configuration go
to chapter 5 (Reverse Operation) and activate the reverse Workorder
Troubleshooting
ote: All commands are logged in the Command Manager (See Related
information (p. xi) [R5])
failed Step
Node Status
Action
"Excluded"
"Validation Failed"
"Activation Partly
realized"
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
5-5
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
PRELIMINARY
Reconfiguration Activation
...................................................................................................................................................................................................................................
Final Status
At the end of this step, the new scrambling code plan has been loaded at OMC side and
has been activated into the RC(s).
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
5-6
...................................................................................................................................................................................................................................
The etwork and the OMC are up and running without any problem. (Alarm, OMC
MIB State, Synchronization State, etc.)
calls can be achieved on the impacted RC
The new scrambling code plan is OK.
PRELIMINARY
Reconfiguration Activation
Check that no impacting Alarms exist (See Related information (p. xi) [R5] and [R7])
...................................................................................................................................................................................................
Perform calls on the impacted RC(s). Especially it can be interesting to pass calls on
Cells for which the scrambling code plans have been updated.
E...................................................................................................................................................................................................
N D O F S T E P S
Final Status
The etwork and the OMC are up and running without any problem. (Alarm, OMC
MIB State, Synchronization State, etc.)
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
5-7
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
PRELIMINARY
Reverse Procedure
6
Overview
Purpose
Contents
Reverse Procedure
6-2
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
6-1
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
Reverse Procedure
Reverse Procedure
...................................................................................................................................................................................................................................
Reverse Procedure
Prerequisites
All the steps of the new Scrambling Code plan procedure have been completed or the
Troubleshooting required going back to the Initial Configuration.
Input parameters
Duration
RC build in case of Fallback failure in TroubleShooting part of chapter 5.2 otherwise
none.
Activation
Go through the following sequences by taking into account data coming from
/<Result_folder>:
Procedure
...................................................................................................................................................................................................
From the WMS client menu bar, select Configuration -> Sessions Manager.
Result: The Sessions Manager window appears.
...................................................................................................................................................................................................
PRELIMINARY
...................................................................................................................................................................................................
In the Create Session window - Creation parameters pane, enter a <reverse session
name>.
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
6-2
Reverse Procedure
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................
PRELIMINARY
Reverse Procedure
Click Launch.
Result: The Create Session window closes and the details of the created session are
displayed in the Sessions Manager window.
...................................................................................................................................................................................................
In the "Sessions Manager" window Click Summary for reverse session namename"
and check the status of the nodes: RC nodes should be in "Validated" state.
...................................................................................................................................................................................................
After session creation completion without errors, in the "Actions for reverse session
namename" tab Click Activation:
When all tasks are completed, in the "Sessions Manager" window, Click Summary
for reverse session name to check that all nodes are in state Activated.
...................................................................................................................................................................................................
10
E...................................................................................................................................................................................................
N D O F S T E P S
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
6-3
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
From the "Sessions Manager" window, in the Session List Right click <reverse session
name> and in scroll down menu select "Terminate" in order to delete the session.
PRELIMINARY
Reverse Procedure
Reverse Procedure
...................................................................................................................................................................................................................................
Troubleshooting
ote: All commands are logged in the Command Manager (See Related
information (p. xi) [R5])
Table 6-1
failed Step
Node Status
Action
"Excluded"
"Validation Failed"
"validated"
PRELIMINARY
Table 6-2
failed Step
Node Status
Action
3.f
"Excluded"
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
6-4
Reverse Procedure
...................................................................................................................................................................................................................................
Table 6-2
(continued)
failed Step
Node Status
Action
3.g
"Validation Failed"
4.b
"Activation Partly
realized"
PRELIMINARY
Reverse Procedure
Final Status
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
6-5
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
PRELIMINARY
PM and FM Impacts
7
Overview
Purpose
Contents
PM and FM Impacts
7-1
PM and FM Impacts
PM
The procedure ensures the correct declaration of the Es with respect to FM
management.
PRELIMINARY
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
7-1
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
PRELIMINARY
...................................................................................................................................................................................................................................
AN
Access ode
PRELIMINARY
Glossary
...................................................................................................................................................................................................................................
CM
Configuration Management
CN
Control ode
...................................................................................................................................................................................................................................
EM
Equipment Monitor
...................................................................................................................................................................................................................................
FM
Fault Management
...................................................................................................................................................................................................................................
GUI
IN
MO
Managed Object
...................................................................................................................................................................................................................................
NN-20500-086
Alcatel-Lucent Internal
GL-1
Issue 9.02 November 2009
Proprietary Use pursuant to Company instruction
PRELIMINARY
...................................................................................................................................................................................................................................
PRELIMINARY
Glossary
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
PM
Performance Management
...................................................................................................................................................................................................................................
ROC
WICL
PRELIMINARY
...................................................................................................................................................................................................................................
Alcatel-Lucent Internal
NN-20500-086
Proprietary Use pursuant to Company instruction
Issue 9.02 November 2009
GL-2