Documente Academic
Documente Profesional
Documente Cultură
Insulating Castables
Cast Data
Brand Name:
Rescocast 9
Description:
RESCOCAST 9 combines the qualities of an insulating and a general duty castable. High
strength and good protection against heat loss have made this product an ideal choice for
the gunning of FCC regenerator and reactor walls. RESCOCAST 9 has been used
throughout the world for this and other critical applications. RESCOCAST 9 can be installed
by either casting or gunning. For pumpcasting or shotcreting applications, Rescocast 9LI PC
is recommended.
2600F
(1427C)
25.0
3
90
(1440 kg/m3)
600 to 2000
(42-140 kg/cm2)
0.0 to -0.4
0.0 to -0.3
Apparent Porosity, %
After 1000F (540C)
43%
Mean Temperature
500F (260C)
1000F (540C)
1500F (815C)
W/mK
0.55
0.48
0.52
SiO2
Fe2O3
39.1
44.4
1.4
TiO2
1.4
CaO
12.4
MgO
0.3
Alkalies
1.0
Phone: 888-283-5505
PRODUCT DATA
Insulating Castables - page 2
Gunned Data
Brand Name:
Rescocast 9
Data shown are the average results of tests following the guidelines set forth in ASTM C-903, "Preparing
Refractory Castable Specimens by Cold Gunning." Results will vary subject to normal variations in
manufacturing, testing, and installation procedures in the field.
2600F (1427C)
95
(1520 kg/m3)
800 to 2200
3
(56 to 154 kg/cm )
0.0 to -0.4
0.0 to -0.3
Apparent Porosity, %
After 1000F (540C)
40%
500F (260C)
1000F (540C)
1500F (815C)
BTU/ft2/Hr/F/in.
4.4
3.9
4.2
W/mK
0.64
0.57
0.61
9/30/11 is the date that this data sheet was published. Check with your RESCO sales representative or RESCO'S website to determine if you have
the most current sheet.
Phone: 888-283-5505