Documente Academic
Documente Profesional
Documente Cultură
Diagram Flow
The diagram flows follows the path of the product being manufactured. The work flows
from the machine shop to the pre-paint area, to the paint shop and finally to the
packaging station.
Data
The data resides in an Excel file named FactoryFloorAssemblyProcessData.xls. The
table is named FFData. The data table has the following columns:
Line #
Units_Processed / hr
UP Status
Variance_to_plan
Variance Status
Rejct/rework_(# pcs)
Reject Status
DT_min_(machine specific)
DT Status
Rolled_Throughput_yield
Data Graphics
There are two different data graphics used in this diagram.
Thruput This is a data bar element that displays the Rolled Throughput yield on
a speedometer with a minimum value of 0 and maximum of 1.
Refreshing Data
Originally the Visio Drawing and Data files were placed in the following directory
C:\Manufacturing Diagrams. To refresh the data when the data file resides in a
different location use the following steps:
1. Right Click on the External Data window and choose Configure Refresh
2. Click Change Data Source
3. Choose Microsoft Office Excel workbook, then click Next >
4. Click Browse, navigate to and select
FactoryFloorAssemblyProcessData.xls, then click Open
5. Click Next >
6. Click Ok to select a new data source
7. With FFData$ as the range you want to use, and First row of data contains
column headings checked, Click Next >
8. Click Next > to include all columns and all data
9. Click Finish to exit the Data Selector
10. Click Ok to exit the Refresh Data dialog
11. Right Click on the External Data window and choose Refresh Data to refresh
the data in the drawing.