Sunteți pe pagina 1din 6

Burr Puzzle

Diagrams and model by


Barlaham Bentez Vargas "Froy"
September 2014.

1.0

6 15x15 cm squares of paper will result in a model


measuring 9.5x9.5 cm aprox.
Any paper is good, stiff papers like tant or elephant hide
are the best.
For copy paper smaller squares work better.

0.62

1- Color side up. Crease the diagonals and


then turn the paper over.

2- Fold the corners to the center crease,


making crease marks only on the edge of the
paper.

3- Fold the paper up bringing the mark


to the center of the paper where the diagonal
creases meet.

4- Fold edge to edge.

5- Like this. Unfold the paper.

6- Repeat 3 and 4. Note the


the right side.

mark on

45
7- Unfold the paper and rotate it 45.

8- Make sure that the marks are at the bottom.

9- Fold on existing creases. Fold the right


side first. (If you are left handed you may
want to fold left side first).

10- Fold the corner up to the point where the


edges of the paper meet. Note that the marks
made in step 2 also meet at this point.

11- Crease firmly and then unfold the paper.


12- The paper should look like this.

13- Fold the corner up using the existing


creases, the paper will not lie flat.

15- Like this. Note that the marks from step


2 meet again on the center. Unfold the paper.

14- Fold the paper up, creating 2 new mountain


folds and using the existing crease lines.
The paper should lie flat now.

16- The paper should look like this. Repeat


steps 9-15 on the top corner.

18- Focus on the left corner of the paper.

17- Mountain fold the paper in half.

20- Fold the corner up the edge to edge.

19- Fold the corner down using the


marks as a reference.

21- Fold and unfold using the edge


behind as a reference.

24. Turn the paper over from side


to side and repeat steps 19-23.
22- Fold and unfold using the crease line
behind as a reference.
23- Unfold the paper to step 18.

25- Fold the corner up.


26- Mountain fold connecting the marks.

27- Reinforce the creases at the top and


the bottom and, mountain fold the paper in half.
(Note that only one mountain fold is reinforced)

28- Inside reverse fold using the existing


crease lines.

29- Like this. Rotate the model and open it up


a bit. Now we will be working on the inside.

30- Fold the corner down using the crease made


in step 20. The creases made in steps 21
and 22 will align when you push the paper in
in the next step. Do the same on the other side.

31- Like this. You may want to use a tool to


push the paper on the
mark to make sure
that all the folds fall into place.

33- Put the other flap under and...

32- Look at the model from outside and start


closing it using the existing crease lines.
Push one side first on the
mark, puting
the darkened long flap under when you push
the other side.

34- You've done it! Don't fold just 5 more pieces,


fold a lot more and bring some happiness
to someone else's day!

S-ar putea să vă placă și