Documente Academic
Documente Profesional
Documente Cultură
poznamka: Vsetky otazky su za 1 bod aj tie v ktorych treba oznacit viac moznosti
(c) Maty
system ROM
The devices in the graphic have been configured with static IP addresses from
network 192.168.102.0. All hosts can communicate with each other but cannot
communicate with the server. What is causing this problem?
The switch that the server is connected to has not been assigned an IP
address.
The router connected to the 192.168.102.96 network is configured for the
192.168.102.64 network.
Which two items are required for initial configuration of Cisco routers? (Choose
two.)
crossover cable
*** 10.192.0.0
10.197.184.0
10.197.187.0
10.197.187.168
*** UDP works well when an application does not need to guarantee delivery
of data.
to allow the receiving host to assemble the packet in the proper order
8
Refer to the exhibit. From router R1, the command telnet 192.168.11.2 is
entered from privileged mode and this message displays:
If the R2 interfaces are in the status shown in the exhibit, what is the most likely
problem?
The login command is missing from the line configuration mode on R2.
*** The password command is missing from the line configuration mode on
R2.
The no shutdown command is missing from the Serial 0/0 interface mode
on R1.
Refer to the exhibit. How many broadcast domains are present in the topology
shown?
*** 2
4
7
10
11
10
*** prve
11
Refer to the exhibit. Host A is using FTP to download a large file from Server 1.
During the download process, Server 1 does not receive an acknowledgment
from Host A for several bytes of transferred data. What action will Server 1 take
as a result?
12
13
vty
aux
console
enable password
14
What can be determined about the network from the exhibited output? (Choose
two.)
The MontegoBay router does not have any LAN interfaces configured.
*** The Negril router is connected to the S0/1 interface of the MontegoBay
router.
15
Which interfaces in the exhibit could be used for a leased line WAN connection?
(Choose two.)
*** 1
*** 4
16
Refer to the exhibit. Host A sends a data packet to Host B. What will be the
correct frame format when host B receives the data packet?
*** prve
17
password ccna
line console 0
password ccna
line console 0
password ccna
line console 0
password 7 020507550A
line console 0
password 7 020507550A
18
Refer to the exhibit. If host A sends an IP packet to host B, what will the
destination address be in the frame when it leaves host A?
DD:DD:DD:DD:DD:DD
172.168.10.99
CC:CC:CC:CC:CC:CC
172.168.10.65
*** BB:BB:BB:BB:BB:BB
AA:AA:AA:AA:AA:AA
19
ping
telnet
ipconfig
*** traceroute
show tech-support
20
The Jax router is not an entry in the host table of the Atlanta router.
*** The Jax router does not have an entry for Atlanta in its host table.
21
If a router is booting with a configuration register setting of 0x2102 and its
NVRAM lacks boot system commands, where will the router try to load the IOS
from first?
ROM
RAM
NVRAM
*** Flash
TFTP server
22
Refer to the exhibit. Four hosts are being added to the 172.16.112.0 network.
Which IP address is invalid as a host address for this network?
172.16.113.55
172.16.112.255
*** 172.16.127.255
172.16.112.89
172.16.120.96
23
*** 172.32.255.240
192.168.1.245
10.15.250.5
*** 205.255.16.250
192.15.301.240
*** 172.11.250.212
24
253
509
1021
2045
*** 4093
25
26
Which terms correctly describe the network shown in the exhibit? (Choose two.)
logical bus
logical star
logical ring
physical bus
physical ring
27
Which addresses are valid host IP addresses given the subnet mask
255.255.255.248? (Choose three.)
192.168.200.87
194.10.10.104
*** 223.168.210.100
*** 220.100.100.154
200.152.2.160
*** 196.123.142.190
28
ABC company needs to connect its router to an ISP to access the Internet. What
device is needed to connect the router to the ISP if the ISP supplies a T1 leased
line for the connection?
*** CSU/DSU
modem
DSL router
NT1 device
ISDN modem
29
What type of cable is used for connectivity between a model 2620 router and a
model 2950 switch (point A), a model 2950 switch and a model 1900 switch
(point B), and a model 2950 switch and a host (point C)?
30
31
1-4-3-2
*** 4-1-3-2
2-4-1-3
4-2-1-3
32
A small business has asked you for advice about what type of cable will be
needed to connect their modular routers. You are required to identify the type of
connectors used by the devices in this diagram.
*** WIC-2T is a Smart Serial connector, WIC1T is a DB60 connector, and WIC-
1ENET is an RJ45 connector.
33
What is the subnetwork number for the IP address 150.3.123.18 with a subnet
mask of 255.255.224.0?
150.3.0.0
150.3.123.0
150.3.64.0
*** 150.3.96.0
34
35
The hosts are connected to the switch as shown. The switches are in their default
configuration. Host A needs to communicate with host D, but host A does not
have the MAC address for its default gateway. Which network hosts will receive
the ARP request sent by host A?
only host D
only router R1
What can be determined from the output of the ping command in the exhibit?
(Choose two.)
37
How many collision domains exist in the network shown in the graphic?
*** 6
38
With CSMA/CD, how are collisions detected and handled? (Choose two.)
Nodes detect collisions when the frequency of the signals on the wire
decreases.
*** An increase in the amplitude of the signals on the wire indicates that a
collision has occurred.
After a collision, the station that caused the collision has first priority to
resend the lost data.
*** After the backoff delay period has expired, all stations have equal priority
to transmit data.
After a collision, all stations run an identical backoff algorithm and then
synchronize with each other prior to transmitting data.
39
192.168.65.16
192.168.65.32
*** 192.168.65.48
192.168.65.64
40
*** UDP is encapsulated within an IP packet for transport across the network.
The Source Port field is used only if information needs to return to the
sending host.
*** TCP randomly selects the source port when establishing a session.
41
Refer to the exhibit. The router named myhome has received a frame from the
host 192.168.254.7. The contents of this frame are being sent to host
172.16.14.243. What is the Layer 2 destination address of the frame as it leaves
the myhome router?
*** 0008.a3b6.ce05
0009.1281.18a8
000a.8a47.e612
172.16.14.129
172.16.14.243
192.168.254.7
42
43
From what location can a router load the Cisco IOS during the boot process?
(Choose two.)
RAM
NVRAM
setup routine
terminal