Documente Academic
Documente Profesional
Documente Cultură
CIMPLICITY HMI
Getting Started
GFK-1500A
March 1999
GFL-002
Warning notices are used in this publication to emphasize that hazardous voltages, currents,
temperatures, or other conditions that could cause personal injury exist in the equipment or may be
associated with its use.
In situations where inattention could cause either personal injury or damage to equipment, a Warning
notice is used.
Caution notices are used where equipment might be damaged if care is not taken.
Note
Notes merely call attention to information that is especially significant to understanding and operating
the equipment.
This document is based on information available at the time of publication. While efforts have been
made to be accurate, the information contained herein does not purport to cover all details or variations
in hardware or software, not to provide for every possible contingency in connection with installation,
operation, or maintenance. Features may be described herein which are not present in all hardware and
software systems. GE Fanuc Automation assumes no obligation of notice to holders of this document
with respect to changes subsequently made.
GE Fanuc Automation makes no representation of warranty, expressed, implied, or statutory with
respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of
the information contained herein. No warranties of merchantability or fitness for purpose shall apply.
CIMPLICITY is a registered trademark of GE Fanuc Automation North America, Inc.
Windows, Windows NT, and Windows 95 are registered trademarks of Microsoft Corporation
Portions of the Basic Control Engine are copyright 1992-1995 by Summit Software
This manual was produced using Doc-To-Help, by WexTech Systems, Inc.
ii
GFK-1500A
Contents
Introducing CIMPLICITY HMI
1-1
2-1
3-1
4-1
GFK-1500A
5-1
ii
GFK-1500A
GFK-1500A
System recommendations
1-1
1-2
GFK-1500A
System Architecture
CIMPLICITY HMI software is scalable from a Human Machine
Interface to a fully networked Supervisory Control and Data
Acquisition (SCADA) system. The networking capabilities inherent at
all levels within the product line let you achieve levels of integration
that virtually eliminate redundant configuration within a network.
Status Monitoring and Control
Graphics Configuration
Viewer Options Available
Connects to Server
Viewer
Ethernet
CIMPLICITY TouchStation
Q R S
1 2 3
T U V
4 5 6
W X Y
7 8 9
+ Z (SP)
- 0
DelKe ypa
C an
d
Server
Ctrl
FN
A B C D E F G H
F1 F2 F3 Func
F4 tion
F5 KF6
ey s F7 F8
J
K L M N O P
F9 F10 F11 F12 F13 F14 F15 F16
Communication Protocols
available for a wide variety of
Industrial controllers
Alt
Glide Point
GE Fanuc
Device Communications
Industrial
Controllers
GE Fanuc
GFK-1500A
1-3
System Recommendations
Your system must meet the following minimum requirements in order
to successfully install and run CIMPLICITY HMI software.
You should also check the Important Product Information document
shipped with your release for any last-minute changes to these
recommendations.
Operating
System
Windows
NT Server
Version 4.0
Viewer
Windows
NT
Workstation
Version 4.0
Minimum
Recommended
RAM
64 MB
Minimum
Recommended
Free Hard Disk
300 MB
40 MB
200 MB
If you plan to support third party drivers such as Data Highway Plus
and MODBUS Plus, you will need an ISA bus.
If you plan to network to other PCs or use the Series 90 TCP/IP driver,
you will also need an Ethernet adapter.
1-4
GFK-1500A
Operating
System
Windows
NT Server
Version 4.0
Viewer
Windows
NT
Workstation
Version 4.0
Minimum
Recommended
RAM
64 MB
Minimum
Recommended
Free Hard Disk
300 MB
40 MB
200 MB
If you plan to network to other PCs or use the Series 90 TCP/IP driver,
you will also need an Ethernet adapter.
Operating
System
Windows
98/95
Version 4.0
Viewer
Windows
98/95
Version 4.0
Minimum
Recommended
RAM
64 MB
Minimum
Recommended
Free Hard Disk
300 MB
40 MB
200 MB
If you plan to network to other PCs or use the Series 90 TCP/IP driver,
you will also need an Ethernet adapter.
GFK-1500A
1-5
(800) 648-2001
Europe
(352) 727979-1
Asia Pacific
(65) 566-4919
Latin America
(610) 437-7932
Mexico
(800) 989-1244
Customer Support
GE Fanuc takes pride in the high quality of CIMPLICITY software.
Great emphasis has been placed on ensuring the quality of this system
throughout development and testing. However, the tremendous power
that the software offers may cause you to encounter problems or
questions for your specific configuration.
If your CIMPLICITY software system is under warranty or is covered
by a valid support contract, you may obtain assistance and report
problems to the CIMPLICITY Technical Support Hotline at one of the
following numbers:
USA and Canada
All others
(804) 978-6036
1-6
GFK-1500A
Installation Startup
Starting up CIMPLICITY HMI installation is similar to other
Windows based software. The exact procedure depends on whether
you are using a:
2.
3.
4.
Open My Computer.
2.
3.
Click the right mouse button and select Sharing... from the
pop-up menu.
4.
5.
6.
7.
Select OK.
Open My Computer.
2.
3.
Select a Drive.
4.
5.
Select OK.
You can now open the shared drive and select setup.bat on the
CIMPLICITY HMI Distribution CD.
2-2
GFK-1500A
Welcome
Destination Location
Program Group
Setup Complete
The CIMPLICITY HMI System Setup screen opens with the Welcome
dialog.
GFK-1500A
2-3
Read the software license agreement carefully. If you accept its terms,
select Yes. If not, select No. If you select No, the installation
terminates.
If you select Yes, installation proceeds to the CIMPLICITY HMI
Product Options dialog box
Select the option you want to install. The options list will be built, and
the Change Destination Location dialog box opens
2-4
GFK-1500A
Select the components you want to install for this product option.
Some components in the Components list have more than one option
available. When you select one of these components, its options are
displayed in the right-hand list box. You can select the options you
want to install for each of these components. When you are through,
select Next to continue with the installation. The Choose Program
Group dialog box opens.
GFK-1500A
2-5
Note: Make sure you highlight each component to review and select
the available options.
GFK-1500A
If you have not licensed your software by the end of the grace period,
your system becomes unlicensed and you have restricted functionality.
See "CIMPLICITY HMI With No License" in the "Registering CIMPLICITY
HMI" chapter for information about restricted functionality
GFK-1500A
2-7
2.
3.
4.
2-8
5.
6.
7.
GFK-1500A
Note: If you do not register your software, or you are running a Demo
system, see Running Without Authorization for a description of the
restricted functionality.
This chapter provides procedures for:
Transferring licenses
It also lists how you can use an unlicensed version and the
accompanying restrictions.
GFK-1500A
3-1
2.
Select HMI.
3.
Select Registration.
.
The Registration Instructions dialog box opens.
4.
5.
7.
9.
9.
10. Enter the serial numbers for your options and version
upgrades.
11. Select Next to continue with registration.
The Registration Authorization dialog box displays the user
information, base serial number and system key code you need
to give GE Fanuc.
12. Select Print Registration to get a printed copy of your user
information, base serial number and system key code
You can fax or telephone GE Fanuc with your registration
information.
13. To continue, either:
3-2
GFK-1500A
(518) 464-4581
Phone:
(518) 464-4619
Faxes and telephone calls are processed between 8 A.M. and 5 P.M.
Eastern time, Monday through Friday, except for regularly scheduled
holidays. Faxes and calls received after hours, on weekends, or
holidays are processed as soon as possible on the following business
day.
If you telephone, please be prepared to provide GE Fanuc with the
following information:
Your User information
CIMPLICITY HMI Serial Numbers
The System Key Code generated during the registration
procedure.
Write down your Authorization Code when you receive it from GE
Fanuc.
GFK-1500A
1.
2.
3.
4.
Select Next.
5.
6.
3-3
7.
8.
9.
2.
3-4
GFK-1500A
2.
3.
Select Change.
4.
Enter the applicable serial number for the base system you are
registering.
5.
6.
Version Upgrades
A Version Upgrade takes an older CIMPLICITY HMI system and
upgrades it to the current version. Contact your distributor for
complete information about ordering a Version Upgrade.
GFK-1500A
3-5
2.
3.
If you are upgrading from a version prior to v3.0, you must contact GE
Fanuc for a new System Authorization Code after you add your
upgrade serial number where indicated in the CIMPLICITY
Registration Serial Numbers dialog box.
To upgrade from CIMPLICITY HMI version that is less than
v3.0:
1.
3-6
2.
3.
4.
GFK-1500A
GFK-1500A
3-7
2.
GFK-1500A
4-1
3.
Select HMI.
4.
5.
Highlight CIMPDEMO.GEF.
6.
Press Start.
The Starting CIMPDEMO dialog box appears.
7.
GFK-1500A
buttons, opening other screens, and creating animations as visual aids. The
main screen is just the beginning.
CIMPLICITY HMI Demonstration Main Screen
Push button
Press one to continue
Animation
Push button
Press to exit
System points
4-3
1.
Quick zoom
2.
4-4
GFK-1500A
1. Select a topic.
2. Click for a
demonstration of the
selected topic.
GFK-1500A
4-5
4-6
GFK-1500A
Uses CimView
Scripting
Uses Basic
Control Engine
GFK-1500A
4-7
Note: If you ran the demonstration, the project will be running when you
open the Workbench.
This section describes how to:
2.
Select HMI.
3.
4-8
GFK-1500A
Screens
Points
Application Folder
Objects in application
Expand the tree
The left pane displays all of the applications you need, either
alone or in folders that contain related applications.
Did not run the Demonstration, the project will be loaded in the
Workbench, but will not be running
GFK-1500A
4-9
2. Select Run.
Method 3Use the keyboard
Press Ctrl+R on the keyboard.
Method 4Use the keyboard
1.
2. Press R.
A CIMPLICITY Configuration dialog box opens asking you if it is ok
to run the project, when you use any method.
Continue after using any method
1. Press OK.
The Starting CIMPDEMO dialog box opens and scrolls the names
of the processes as they are opened.
4-10
GFK-1500A
2. Select Stop.
Method 3Use the keyboard
1.
2. Press S.
A CIMPLICITY Configuration dialog box opens asking you if it is ok
to stop the project, when you use any method.
Continue after using any method
Press OK.
The demonstration project stops running.
GFK-1500A
4-11
This chapter describes how to display and use each of the options listed
above.
Note: When you use the Book Reader, you can read the printed
manuals in electronic format.
CIMPLICITY HMI Workbench Help
Displaying the Demonstration Project
Online Help
Help for
each
application
GFK-1500A
5-1
2.
Select HMI.
3.
Method 2
1.
2.
Select Contents.
Method 3
1.
Method 4
Press F1 on the keyboard when the Workbench displays.
Any of the methods displays a window that lists the help files for all
installed CIMPLICITY HMI applications.
5-2
GFK-1500A
Click to display a
u
User Manual
individual Help file
Click to display a
TOC for other
selected manual
Help files.
GFK-1500A
5-3
Note: The Adobe Acrobat Reader Online Guide, and Adobe Acrobat
Search Online Guide provide detailed documentation for using Adobe
Acrobat.
2.
3.
4.
5.
6.
5-4
1.
2.
Select HMI.
3.
GFK-1500A
Method 2
1.
2.
Method 3
1.
1. Click a
manual title
GFK-1500A
5-5
Note: You can press F1 at any time to display the Adobe Acrobat
Reader Online Guide. This online documentation shows you how to
navigate through the on-line books and use the Find features of the
Book Reader.
5-6
GFK-1500A
2.
Tip: The graphics display the best when screen resolutions are
1024x768 or higher and the document is magnified.
Page display
style
Bookmark
display
GFK-1500A
5-7
Go to
page
2.
Move the mouse pointer over the name of the topic you want
to display.
The cursor changes to a pointing hand
2.
5-8
GFK-1500A
Click
Nest
Previous
Press
Right or down arrow
Left or up arrow
First
Home key
Last
End key
Click the
button on the Toolbar or select Find from the
Tools menu.
The Acrobat Find dialog box opens.
GFK-1500A
2.
Enter the text you want to search for in the Find What field.
3.
Select the check boxes for the type of search you want to
perform.
5-9
4.
Click Find.
When the Book Reader locates the text the page displays and
the text is highlighted.
5.
Press Ctrl+G to re-open the dialog box and find the next
occurrence of the text in the document.
2.
Select Search.
3.
Select Indexes.
The Index Selection dialog box opens.
4.
5.
5-10
GFK-1500A
6.
Either:
Method 1
Click the
Method 2
A. Select Tools on the menu bar.
B. Select Search.
C. Select Query.
The Adobe Acrobat Search dialog box opens.
7.
8.
Click Search.
The Adobe Acrobat Search dialog box closes and the Search
Results dialog box opens with a list of all the documents that
contain the text.
9.
or
buttons
Method 2
A. Select Tools on the menu bar.
B. Select Search.
C. Select Next or Previous.
GFK-1500A
5-11
Tip: If you close the Search Results dialog box, you can click the
button on the Toolbar to reopen it.
Expanding/Limiting a Text Search in Multiple Documents
The options in the Adobe Acrobat Search dialog box enable you to
expand or limit your search. The options are:
Word Stemming expands the search to find words that share a
word stem with the work you type.
Sounds Like expands the search for a proper name by finding
words that begin with the same letter and share phonetic
features.
Thesaurus expands the search to find words with meanings
similar to that of the search word.
Match Case limits the search to find only those words that match
the case of the search word.
Proximity limits the results of simple AND searches to one pair
of matches per document. The matches must be within three
or fewer pages of each other.
Doing Boolean Searches for Text in Multiple Documents
You can use AND, OR and NOT operators in the Find Results
Containing Text field to perform Boolean searches for combinations
of text.
Guidelines for using Adobe Acrobat reader, which is used
by the CIMPLICITY HMI Book Reader
5-12
2.
Select Search.
3.
Select Indexes.
4.
GFK-1500A
Printed Documentation
Contact you GE Fanuc Automation distributor to purchase one or more
printed manuals. When you order, use the product numbers for the
manuals listed below.
Following is the entire list of manuals, including manuals for options.
They can be accessed in an online help version, electronically through
the Book Reader, in addition to being purchased in print from GE
Fanuc Automation.
Product #
GFK-1180G
GFK-1181F
GFK-1396C
GFK-1305B
GFK-1282D
GFK-1283E
GFK-1260E
GFK-1379B
GFK-1341D
GFK-1461A
GFK-1405B
GFK-1494A
GFK-1303C
GFK-1353C
GFK-1413C
GFK-1216D
GFK-1408A
GFK-1548
GFK-1500A
Manual Title
5-13
Index
A
Adobe Acrobat
And list of CIMPLICITY HMI
documents 5
Book Reader 4
Displaying the online guide 6
Find dialog box 9
Guidelines for the reader 12
Applications
Immediate help for 3
Authorization code, entering
Registration 3
Device
Points and CIMPLICITY HMI
licenses 3
Points and the CIMPLICITY HMI
license 3
Display
Changing the format in the Book
Reader 6
Display
Changing the size in the Book
Reader 6
Distributors
Phone numbers 6
Documentation
Displaying a page in the Book
Reader 7
List appearing in the Book Reader
5
E
Electronic Book
Installation 4
Open 4
B
Book Reader
About 4
Changing the view 6
Display selected text 9
Finding text in multiple documents
10
Go to a page 7
Installation 4
Open 4
Bookmark
Using to display a page in the
Book Reader 8
F
Find
Selected text in an active Book
Reader document 9
Text in multiple documents 10
For Windows 98/95 on Intel
processors
System requirements 5
For Windows NT on DEC Alpha
System requirements 5
Function Upgrade Registration 5
G
C
CD-ROM
Local used for installation 1
Shared used for installation 2
CIMPLICITY HMI
Customer support 6
MMI and MES/SCADA Products
1
Registering 1
Running without authorization 7
Software installion 1
System architecture 3
System recommendations 4
Upgrading 4
Contacting your distributor 6
Customer support 6
GFK-1500A
GE FANUC
Hotline 6
Guidelines
Using the Adobe Acrobat reader
12
H
Help
Overview 1
Specific to an application 3
Table of Contents for online help 2
Hotline
Phone numbers 6
I
Installation
Book Reader 4
Choosing to register 6
New option 8
Startup 1
Upgrade licenses 6
Using a local CD-ROM drive 1
Using a shared CD-Rom drive 2
Installion
CIMPLICITY HMI software 1
L
License
And device points 3
Installing for upgrade 6
Products shipped with 2
Licenses
Registering 1
Running without authorization 7
Upgrading CIMPLICITY HMI 4
List of Manuals
Appearing in the Book Reader 5
Local
CD-ROM drive and installation 1
N
New
Option installation 8
Nodes
Multi-node systems 3
Single node systems 3
O
Online
Help 2
Open
Book Reader appearance 5
Electronic book 4
Option
Installing a new option 8
Overview
Book Reader 4
CIMPLICITY HMI help 1
CIMPLICITY HMI installation 1
CIMPLICITY HMI system
architecture 3
Getting Started manual 1
P
Page
ii
R
Receive
With CIMPLICITY HMI shipment
2
Registering CIMPLICITY HMI 1
Calling GE Fanuc 3
Running without authorization 7
Registration
CIMPLICITY upgrades 4
Entering the authorization code 3
Functional upgrades 5
Phone numbers 3
Version upgrades 5
Registration program
Running initially 2
Run
CIMPLICITY HMI project 10, 11
Running Without Authorization 7
S
Search
for text in the Book Reader 10
Select
A page to display in the Book
Reader 7
Text to display in the Book Reader
9
Setup.bat
And installation with a local CDROM drive 2
And installation with a sharedCDROM drive 2
And new option installation 8
Shipment
CIMPLICITY HMI products 2
Software
About CIMPLICITY HMI MMI
and MES/SCADA products 1
Start
CIMPLICITY HMI project 10, 11
Startup
CIMPLICITY HMI Getting StartedMarch 1999
GFK-1500A
Installation 1
Support
Hotline 6
System Architecture 3
System Recommendations 4
System requirements
Windows 98/95 on an Intel
platform 5
Windows NT on DEC Alpha 5
Windows NT on Intel processors 4
T
Table of Contents
Help 2
Text
Searching for in multiple
documents 10
U
Updgrade
Functional registration 5
Upgrade
CIMPLICITY HMI 4
Installing licenses 6
Version registration 5
V
Version Upgrade Registration 5
View
Changing in the Book Reader 6
Virtual
Points and the CIMPLICITY HMI
license 3
W
Windows 98/95
Installation from a local CD-ROM
drive 1
Windows NT
Installation from a local CD-ROM
drive 1
Windows NT on Intel processors
System requirements 4
Word
Finding in the Book Reader 9
Workbench
Accessing CIMPLICITY HMI
help 1
GFK-1500A
Index
iii