Documente Academic
Documente Profesional
Documente Cultură
The Microwave
Get to Know your Mouse
Select in the
tutorial means
using the
left mouse The Esc
button. key on your
keyboard is
used to
cancel a
Right mouse button command.
Brings up additional options
Graphics window
Take a few
minutes to look
at this screen
3D Indicator
Point 3
Point 4
Select point 5 look out for the parallel symbol to indicate that this vertical line is
parallel to the line drawn between points 3 and 4.
Starting point
Hidden line
means alignment
between point 1
and point 6.
Point 5
Point 6 parallel constraint symbol
As you select point 6 notice the parallel constraint symbol. Look out
for the hidden line this tells us that point 6 is aligned with point 1.
Select point one again to finish the Closed shape.
To end drawing lines press Esc key.
Right click the anywhere again on the screen and select Finish
Sketch.
Right click anywhere on the screen and select the
Isometric View.
Select OK to finish
the command.
Your Shape should look like
this I hope ?
On your own
using the 2
Point
rectangle.
Draw and
dimension
two
rectangles as
shown.
2.5
Esc dimensioning and Finish
sketching.
From the Part Features menu
select Extrude.
Select the
Profile button.
Select both
rectangular
shapes.
Length
You may
have to
select Flip
to get the
correct
direction.
Handles
Select the
Handles notice
how your
model moves
about.
Do not worry
too much as
you can
always reset to
the Isometric
View.
Try to Rotate your Model into this position
Select
Wireframe
Display
Right click
anywhere
on the
screen and
select
Done from
the menu.
To finish
Rotate.
Select below
Radius and type in
1 for the radius
Select Distance to .5
Make sure
this button is
pressed
Select Edges.
You can add other faces such as the edges of the door by holding
down the Ctrl key and selecting all the faces of the door .Use the
Rotate to get them all.
Select Black as
the Face Colour
Style.
Select OK to finish
the command.
Zoom In