Documente Academic
Documente Profesional
Documente Cultură
Standard
TWCH with Slip on Weld Prep with Line Pipe Outlets and Studded Side Outlets
Optional
TWCH-BP has lockscrews to hold the wear bushing in place.
TVC Model TWCH wellhead casing heads feature a versatile straight bore design that can
accept a wide variety of slip and mandrel type casing hangers.
Features
Features a 45 landing shoulder capable of supporting maximum loads
Prevents test plugs from wedging under pressure
Outlets
Manufacturing Standard
API-6A, PSL-1, DD, L-U, PR-1
Availability
Lock screws
C-22-BP casing heads are supplied with (2) lock screws for wear bushing retention
C-22-L and C-29-L casing heads are supplied with a full set of lock screws for mandrel
casing hanger and packoff retention (Available upon request)
Bottom Connections
Slip-on weld
Optional
C-22-BP has lockscrews to hold the wear bushing
in place
TVC Model TWCS casing spools feature a versatile straight bore design that can accept a
wide variety of slip and mandrel type casing hangers.
Features
Features a 45 landing shoulder capable of supporting maximum casing loads
Prevents test plugs from wedging under pressure
Outlets
Line Pipe Outlets
Studded Side Outlets
Manufacturing Standard
API-6A, PSL-1, DD, L-U, PR-1
Availability
Additional sizes available upon request
Available in C-29 profile (Available upon request)
Lock screws
C-22-BP casing spools are supplied with (2) lock screws for wear bushing retention
C-22-L and C-29-L casing spools are supplied with a full set of lock screws for mandrel
casing hanger and packoff retention (Available upon request)
Bottom Preparations
PE/BG bottom, for use with PE secondary seal bushing (Standard)
HPE bottom, for use with HPE secondary seal bushing for high pressure applications
(Available upon request)
TVC Model TWTS tubing heads feature a versatile straight bore design for single and
multiple completions.
This design accepts all TC series tubing hangers and easily converts from a single
completion to multiple completions with the addition and alignment pin(s).
Available Sizes
Available with 7-1/16" nominal bowl
Compatible with 7-5/8" production casing
Outlets
Line Pipe Outlets
Studded Side Outlets
Manufacturing Standard
API-6A, PSL-1, DD, L-U, PR-1 (3M-5M)
API-6A, PSL-2, DD, L-U, PR-1 (10M)
Bottom Preparations
PE/BG bottom, for use with PE secondary seal bushing (Standard)
HPE bottom, for use with HPE secondary seal bushing for high pressure applications
(Available upon request)
Availablility
Additional sizes available upon request Available with ET (Integral) style lock screws
Flanged top Tubing Heads available with slip-on weld or threaded bottoms
Tree Caps
Model TWH
We design and manufacture the wellhead and christmas tree in according with API 6A standards totally, also can be supplied to meet
the complete material class, temperature range and PSL& PR level requirements.
We have lots of type of wellhead for choice,such as conventional spool wellhead, ESP wellhead system, thermal wellhead ,water
injection wellhead, time saving wellhead, dual tubing wellhead, integral wellhead,etc.
CCSC's customizable Dual Completion Wellhead System allow customers to design their ideal equipments for reliable and consistent
performance on their production system.
2. Metal-to-Metal seal, gate to seat, seat to body, bonnet seal and stem backseat.
3. Bi-directional Sealing,
5. Heavy duty thrust bearing is used to absorb stem thrust and reduce operating torque.
6. Non-rising stem made by Alloy-nitrided or 17-4 stainless steel, the pressure in the body cavity will not increase during valve
operation, can replace stem packing under pressure.
1. Forged or Cast Body & Bonnet, A wide range of body and trim materials to meet various operating conditions.
2. Metal-to-Metal seal, gate to seat, seat to body, bonnet seal and stem backseat.
3. Bi-directional Sealing,
4. All internal parts can be inline changed,No special tools are needed to change gate and seat assembly.
5. Heavy duty thrust bearing is used to absorb stem thrust and reduce operating torque.
6. The Stem pin protects the stem and internal parts from failure by shearing if the handwheel is over-torqued
1. Forged or Cast Body & Bonnet, A wide range of body and trim materials to meet various operating conditions.
2. Metal-to-Metal seal, gate to seat, seat to body, bonnet seal and stem backseat.
3. Bi-directional Sealing,
4. All internal parts can be inline changed,No special tools are needed to change gate and seat assembly.
5. Heavy duty thrust bearing is used to absorb stem thrust and reduce operating torque.
6. The Stem pin protects the stem and internal parts from failure by shearing if the handwheel is over-torqued
2. Metal-to-Metal seal, gate to seat, seat to body, bonnet seal and stem backseat.
3. Bi-directional Sealing,
Casing head
Casing Head is the very important equipment used in drilling process casing head can control the wellhead pressurecasing head
are often welded or screwed on the top of the conductor pipe or the casing then become a part of the wellhead system of the oil well.
Casing Head has a straight bore bowl with 45landing shoulder design which avoids damage to sealing areas by drilling tools and
prevents test plug and bowl protector wedging problems when pressure is applied.
Casing Head provided by CCSC are normally furnished with threaded outlets and studded outlets and also can be manufactured by
request. Bottom connections can be furnished threaded or slip-on for welding.
Casing Head provided by CCSC can used for single completions and model of dual completions.
Feature:
5. Three different types of outlets: Line pipe, Flanged (Studded) Extended flanged outlets.
6. Multiple bottom connections, such as: Slip-on weld, Slip-on weld with O-ring, Threaded and Sure Lock.
Casing hanger
Casing hanger is a assembly which can supports the casing string when it is used in the wellhead. The casing hanger can assure the
casing string is correctly located and generally incorporates a sealing device or system to isolate the casing annulus from upper
wellhead components.
Casing spool
Casing spool is the very important equipment used in drilling process,casing spool can control the wellhead pressurecasing spool
are often flange ended on the top of the casing head and connected with the bottom of the tubing head then become a part of the
wellhead system of the oil well.
The casing spool has a straight bore bowl with 45landing shoulder design which avoids damage to sealing areas by drilling tools and
prevents test plug and bowl protector wedging problems when pressure is applied. CCSC's Casing spools are normally furnished with
threaded outlets and studded outlets and also can be manufactured by request. they can be used for single completions and model of
dual completions.
Features
Versatile straight-bore design,uses a 45 landing shoulder;
3 different types of outlets: Line pipe, Flanged (Studded) Extended flanged outlets.
Allows use of lock screws to retain hanger.
Has a additional lock screws for Bowl protecion..
Accepts a wide variety of slip and mandrel casing hangers.
Multiple bottom sealing type, such as: PE/BG bottom,OO bottom and double "P" seal bottom.
Tubing Head &tubing spool are a straight bore bowl with 45 landing shoulder design which avoids damage to sealing areas by drilling
tools, and provides wedging of the tubing hangers, bowl protectors and test plugs. the secondary seal for the last casing pipe can be an
integrated "OO" seal type or the plastic injection type, but also accepts reducer bushings "4-O" and "PE" (Pressure Energized).The
upper flange is supplied with lockdown screws for packoff tubing hanger retention. The lower flange includes a grease fitting and orifice
for testing of the secondary seal.
Tubing Head provided by CCSC can used for single completions and model of dual completions.
Feature:
1. Versatile straight-bore design,Uses a 45 landing shoulder can safety support maximum loads.
2. Bodies can be made from materials suitable for many severe service environments.
3. Two different types of outlets: line pipe outlets and flanged padded (studded) outlets.
Tubing hanger
Tubing hanger is an assembly used in the oil or gas production wells. Tubing hanger is set in the tubing head and suspends the
production tubing,tubing hanger often own through ports to allow the communication ofhydraulic,electric and other downhole control
functions, as well as chemical injection. Tubing hanger also serves to seal-in the annulus and production areas.
CCSC can supply many types of the tubing hangers and we can also design it as per the special requirement of the user.
Tubing head adapter is often used on the top of the tubing head, it can provides a connection between tubing head and Christmas
tree. The bottom flange of the adapter matches the tubing head, and the top flange of the adapter matches the X-MAS tree. Tubing
head adapters are available for all types of single and multi-string completions, including those using ESP penetrator, packers, down
hole control valves and gas lift valves.
Our adapters have threaded, flanged or studded-flange top connections. our tubing head adapters are available with hydraulic supply
inlets for down hole control valve. CCSC can also supplies various types of adapters specially as requirements.
CCSC's customizable DSA allow customers to design their ideal DSA for reliable and consistent performance on their production
system.
CCSC has many sizes and pressure ratings "DSPF" used for drilling applications.
CCSC's customizable tree cap allow customers to design their ideal equipment for reliable and consistent performance on their drilling
system.
6B flanges are of the ring joint type and are not designed for face-to-face make-up. The connection make-up bolting force reacts on the
metallic ring gasket.
6BX flanges are of the ring joint type and designed with a raised face. Depending on the tolerances, the connection make-up bolting
force may react on the raised face of the flange when the gasket has been properly seated. This support prevents damage to the flange
or gasket from excessive bolt torque.
Spacer Spools - Riser Spool are the parts which are often used in the oilfield for wellhead extension,choke and kill manifold, etc.
appication, it is designed and manufactured in accordance with API 6A standard,it usually has the same nominal end connections. all
the configurations as below are available:
CCSCs customizable spacer spools allow customers to design their ideal spacer spools
for reliable and consistent performance on their production system.
Adapter spool
Adapter Spool is the part which is often used in the oilfield, adapter spool is designed and manufactured in accordance with API 6A
standard, the material is AISI 4130 or 410SS as per customer's requirement, adapter Spools usually have the different nominal end
connections. CCSC Adapter Spools have all sizes and pressure ratings used for oilfield applications.
Drilling spool
Drilling Spools are the parts which are often used in the oilfield when drilling, Drilling spools are designed to allow safe circulation of
mud. Drilling spools usually have the same nominal end connections and the same nominal side outlet connections.
Model B
On base plate .
With test ports &drain port.
Changeable mandrel retaining threads.
Model C
On base plate .
With test ports and view port.
Fixed mandrel retaining thread.
Fast lock connector and bop x-overs.
Basic material of construction is alloy steel. For corrosion resistance, we can overlay 316 SS or Inconel 625 on the ring groove to
improve product life if required.CCSC's customizable BOP TEST STUMP allow customers to design their ideal product for reliable and
consistent performance.
Back Pressure Valve is the equipment which is often used in the wellhead and Christmas tree and installed inside the tubing hanger
for blocking the fluid, Back pressure valve always have a BPV thread for connecting with the tubing hanger.
Both single way and two way back pressure valves are available
CCSC's customizable back pressure valve allow customers to design their ideal BPV for reliable and consistent performance on their
production system.
API 16A Clamps are the parts which are often used in the wellhead system, manifold system and BOP system for hub connection. API
16A Clamp is designed and manufactured in accordance with API standard,we have all sizes and pressure ratings clamps used for
oilfield applications.
4. Easy to install.
In the event of a shallow gas kick, the diverter is energized to seal around the drill pipe and divert the gas safely overboard. Diverter
system must be equipped with hydraulic control system during operation. And it can seal different size of drill pipe.
We can offer reliable cement heads in various sizes and pressure ratings for superior performance in cementing operations.
Features
Indicates when the top plug passes into the casing.
Having manifold with lo-torque plug valve.
Provides continuous operation.
The plug container holds one or two plugs, the top plug and the bottom plug. The double plug container has a three in-torque valve
manifold and two plunger assembly
The length of plug containers are made to accommodate the standard length of plugs.
The cap is available with ACME thread and with lifting chain for lifting the plug container.
Single or Double Plug chamber is available
Kill Manifold
Kill manifolds are often used in the oilfield when drilling, Kill manifolds are designed and manufactured in accordance with API 6A&API
16C standards. They are specifically made for injecting heavy mud, water and extinguishant during drilling
CCSC has many sizes and pressure ratings Kill manifolds used for drilling applications.
Basic to the operation of the flowhead is the opening and closing of valves in a particular sequence or order depending on what
operation needs to be done. The following list describes several common operations and provides figures that show the typical status of
the valves for these operations. The valve settings may change depending on whether other operations must be performed
simultaneously.
The handling sub also provides an interface to the surface wireline or coiled tubing equipment. A dynamic swivel is located between the
main valve block and the lower master valve, allowing rotation of the string without rotating the flowhead, and preventing any rig
movement from transferring torque into the riser or landing string.
Swivel
The flowhead swivel is inserted between the master valve and the main valve block. It allows the subsurface equipment to be rotated
with respect to the main flowhead block. Using a swivel, it is possible to rotate the subsurface equipment without disconnecting the flow
line or the kill line. An example of this is using the swivel to set the drill stem test (DST) packer downhole. Another example is to re-latch
the subsurface connection used with floating rigs.
The swivel is designed to allow rotation of the subsurface string while supporting the weight of the whole subsurface string. Roller
bearings are used to support the significant weight of the test string and the downhole tools. Ball bearings are used to support the
lighter weight of the flowhead and the equipment above the flowhead.
The swivel should not be rotated under pressure which means that it is not designed to hold the pressure when submitted to a
continuous rotating movement like in drilling operations. The most common applications (as mentioned earlier) are done with the
pressure close or equal to zero at a very low rotating speed . During a well test, the pressure can be close to the swivel working
pressure but the swivel either does not move (onshore) or oscillates a little due to the heave (offshore).
The pressure needed to keep the valve open can be provided with a simple hand pump which, in an emergency, is bled off on the rig
floor. However, a more sophisticated system called an emergency shut down (ESD) is recommended because it allows the actuator to
be activated remotely.
ESD system consists of ESD control panel with air-driven hydraulic pump, hydraulic tank, air hoses, and hydraulic hoses, ESD remote
stations,High- and low-pressure pilots, and the storage reels for hoses.
Each flow path has two closing gate valves which are used to direct the flow through either of the chokes or the chokes or the bypass
and to provide isolation from pressure when changing the fixed choke. A dual isolation, double block and bleed valve arrangement is
recommended for high pressure, sour gas and sand frac clean ups.
Choke manifold is used during well testing,. The positive choke has a fixed diameter and the size of the orifice on the adjustable choke
can be varied. In addition the adjustable choke allows fixed chokes to be switched out as needed without stopping the well, increasing
the flexibility of the overall system.
Choke bean is often used in the positive choke valve for controlling the flow, our positive choke beans are similar as Cameron type H2
big john, Body Material: 410SS, lined with Tungsten Carbide or ceramic.
On one side of the choke manifold, calibrated choke beans are used to control flow rate through the fixed choke box. Each bean is a
specific diameter, usually in graduations of 1/64-inch, and is screwed into the choke box. These are the most common sizes (in inches)
of choke beans used: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1, 1-1/4, and 1-1/2. Depending on the type of equipment
used, the size of the choke bean can be as large as 3 inches.
Feature:
2. Both ceramic liner and tungsten carbide liner are all available.
4. Customizable size.
Adjustable choke valves are often used in the oilfield when drillingtestingproduction, our adjustable choke valve is designed and
manufactured in accordance with API 6A and API 16C standard and improved from Cameron H2 series adjustable choke valves. They
are easy for operation and simple to maintain.
Our adjustable choke valves have many sizes and pressure ratings used for oil field application
Feature:
5. Max orifice:1"-3".
Avalaible Specication
Bore Size
2-4 inch
Working Pressure
2,000psi 20,000ps
Material Class
AA-EE
Connection type
flange,union, thread
We have all range sizes and pressure ratings cage and sleeve choke for clients' demend.
4. Control sleeve and seat sealing surfaces are not directly exposed to the high velocity flow.
5. Max orifice:1"-3".
Available Specication