Sunteți pe pagina 1din 4

Planned Maintenance

To be filled by Requester
For Change Only,
Create

Deactivat
e

Chang
e

Tag No. (Sort Field)


D-3137

Act
.
No

Sub
Oper.
No.

Change

Work
Cente
r

ReActivate

write existing Maintenance


Plan:

Start-up date (DD.MM.YYYY):

PM Activity General Description (40 characters


only)
98wt% H2SO4 INJECTION TANK INSPECTION

Maint. Planning
Category
PM - Maintenance Order
Reason for:

Delete

Main Work Center


MS

Order Type

Activity Type

Priority

1P - Preventive Maintenance

PRV - Preventive Maint.

3 - Long-term Plan

De-Activation

Deletion

Re-Activation

Operation Short Text (40 characters only)

No.
of
Pers

Act.
Dur.

Total
M/hr
s

Freq.

1Y

0.5

0.5

1Y

Annual Inspection
Prepare necessary tools (wrenches, torque wrenches or
hydraulic/pneumatic power torqueing tool, power grinder,
power brushes, jet washers, etc.), materials (gaskets,
flange bolts, cleaning equipment and tools, etc.), air
handling equipment (blowers, exhausters), scaffolding/
platforms/ ladders, hazardous gas analyzer
Prepare Job Safety Hazard Analysis. Prepare personnel
protective equipment (harness, coveralls, eye goggles,
gloves, dust protectors / breathing apparatus)

10

MS

20

MS

30

MS

Secure work permit.

1Y

40

MS

Erect external scaffolding where needed.

1Y

1Y

1Y

0.5

1Y

0.5

1Y

3Y

50

MS

60

MS

70

MS

80

MS

90

MS

Perform quality inspection of tank externals. Ensure that all


shell and roof plates outer surface and welds, pipe support
clips, vertical ladders, stairways and platforms, shell
stiffener and top angle, painting, Insulation and signs of
gasket leaks, leaks from attached valves and
/instrumentation, nozzles and manholes connections,
breather valve with flame arrester, free vents, pressure
relief valves, emergency vent cover, gauge hatch, air foam
system piping, foundation bolts and nuts, reinforcing pads,
earth lugs, settlement check pieces and other external
components are free of corrosion, scale and dirt. Refer to
VP-071061-106-Z-3131-202 - DESALINATION SYSTEM
ATM TANK ASSEMBLY DRAWING
Dismantle scaffolding/platforms/ladders used during the
cleaning and final inspection
Clean work area and close all safety and special permits.
Close maintenance work permit and attach all supporting
documentation.
Also refer to WIP Inspection and Overhauling of D-3137
98wt% H2SO4 INJECTION TANK(Optional)

Inspection and Overhauling during TAM


10

MS

Prepare necessary tools (wrenches, torque wrenches or


hydraulic/pneumatic power torqueing tool, power grinder,
power brushes, jet washers, etc.), materials (gaskets,

20

MS

30

MS

40

flange bolts, cleaning equipment and tools, etc.), air


handling equipment (blowers, exhausters), scaffolding/
platforms/ ladders, hazardous gas analyzer
Prepare Job Safety Hazard Analysis. Prepare personnel
protective equipment (harness, coveralls, eye goggles,
gloves, dust protectors / breathing apparatus)

0.5

0.5

3Y

Secure work permit.

3Y

MS

Apply mechanical and electrical isolations per Lock-out


Tag-out procedure

3Y

50

MS

Open all vents

0.5

3Y

60

MS

Transfer content into clean tanks or drums.

3Y

70

MS

Erect external scaffolding where needed.

3Y

80

MS

3Y

90

MS

0.5

3Y

100

MS

0.5

3Y

110

MS

0.25

0.5

3Y

120

MS

Erect internal scaffolding where needed.

3Y

130

MS

Initially flush internals to prepare for initial inspection.

0.5

3Y

140

MS

0.5

3Y

150

MS

3Y

160

MS

3Y

170

MS

3Y

180

MS

0.5

3Y

190

MS

3Y

200

MS

3Y

210

OP

Return all vents to normal line-up

0.5

3Y

220

MS

Secure or retrieve all mechanical and electrical isolations


per approved Lock-out Tag-out procedure

0.5

3Y

230

MS

Perform leak testing as applicable

3Y

240

MS

Dismantle scaffolding/platforms/ladders used during the


cleaning and final inspection

3Y

250

MS

Clean work area and close all safety and special permits.

0.5

3Y

260

MS

Close maintenance work permit and attach all supporting


documentation.

0.5

3Y

Blind all nozzles. For nozzle details, refer to VP-071061106-Z-3131-202 - DESALINATION SYSTEM ATM TANK
ASSEMBLY DRAWING
Open manways. Refer to VP-071061-106-Z-3131-202 DESALINATION SYSTEM ATM TANK ASSEMBLY
DRAWING
Ensure that the equipment is purged, drained, degassed
and free of hazardous medium.
Test for hazardous gases using calibrated and certified
Gas Analyzers. Oxygen content should pass industry and
plant safety standards. Gas test periodically or as required.

Perform initial internal inspection to determine and list the


scope of maintenance to be performed.
Clean internals of scale and dirt using applicable means,
equipment and tools: power brush, jet washer, scrubbing,
others.
Final Quality internal inspection and acceptance. Ensure
that all shell, roof and bottom plates inner surface and
welds, dip pipes, draw-off sump, deflector for air foam
system and other internal components are free of scale
and dirt. Refer to VP-071061-106-Z-3131-202 DESALINATION SYSTEM ATM TANK ASSEMBLY
DRAWING
Remove all tools, materials, and air handling equipment
from vessel internal.
Ensure that all personnel have been evacuated and
counter check against the approved and issued Confined
Space Entry Permit and Authorized Personnel Entry List.
Remove all blinds, replace old nozzle gaskets and return
to normal line-up.
Close all manways. Replace old gaskets. Use calibrated
torque wrenches or hydraulic/pneumatic power torqueing
tool. Refer to Torque Tension Relationship for ASTM
A193 B7 Bolts and Studs or Torque Chart for ASTM A193
Grade B7 Studs. Return manhole cover insulation, as
applicable.

270

MS

Also refer to WIP Inspection and Overhauling of D-3137


98wt% H2SO4 INJECTION TANK(Optional)

Long Text
Act.
No

Long Description

Related Materials:
Act.
No
200
200

Material No.
No information
available
No information
available

Material Description

Quantity

GASKET, CHLOROPRENE RUBBER 3t (FOR 18 MANHOLE)

STUD BOLT AND 2-HEX. NUT (FOR 18 MANHOLE)

For Providing additional information on Operation Long text, Materials, attach


separate sheet(s).
Comments/ Remarks by Requester

Requester
Name/ Employee No.

Date (DD.MM.YYYY)

Approval
Name/ Employee No.

Position/ Title

Date
(DD.MM.YYYY)

Administration (to be filled by Planning)


Maintenance Planning
JGSPC

Plan Type
SingleStrategycycle
based

JGSOC

Maintenance Plan
No.

Maintenance Item
No.

Equipment No.

As Planned Start
Date

Call Horizon (%)

Scheduling Period

Comments/ Remarks by Planning

Input By
Name/ Employee No.

Date (DD.MM.YYYY)

Functional Location
No.

Scheduling Period
Unit
MON - Months

S-ar putea să vă placă și