Documente Academic
Documente Profesional
Documente Cultură
M-WiMAX Network
CONTENTS
1. ACR environment parameter setting
2. Set the environment parameters
3 Ch
3.
Check
k th
the environment
i
t parameters
t
4. Check if the environment parameters
5. ACR g
grow execution
6. ACR Act execution
7. ACR Degrow execution
8 ACR D
8.
Deactt execution
ti
9. RAS environment parameter setting
10. RAS g
grow execution
MRA-F1
MRA-F0
MMA-G
BP
LCMA0
BP
LCMA1
Tera Term
PC
3 Pins Dedicated Cable
VALUE
DESCRIPTION
CS_TYPE
GWIP0_MTU_V4
1484
IP_VER
LD_PRIOR
NE_TYPE
ACR
REG_FLAG
NE_NUM
GWIP_FLAG
GWIP0_V4
10.0.15.132
Gateway IP
GWIP0_NM_V4
25
LEIP00_V4
10.0.15.131
LEIP00_NM_V4
25
REIP00_V4
10.0.15.121
REIP00_NM_V4
30
RSIP0_V4
10.0.5.135
SNMP_TRAP_IP_V4
10.0.5.135
__BOOTUP_FLAG__
0000
ACR IP
NAME
VALUE
CS_TYPE
GWIP0_MTU_V4
1484
GWIP0_NM_V4
24
GWIP0_V4
10.0.119.1
GWIP_FLAG
IP_VER
LD PRIOR
LD_PRIOR
LEIP00_NM_V4
30
LEIP00_V4
10.0.119.153
NE_NUM
NE TYPE
NE_TYPE
ACR
REG_FLAG
REIP00_NM_V4
30
REIP00_V4
10.0.119.157
RSIP0_V4
10.0.26.10
SNMP_TRAP_IP_V4
10.0.26.10
FAP_X_SUB_V4
255.255.255.0
FAP_X_V4
10.89.12.41
__BOOTUP_FLAG__
04_00_06_LCMA
04
00 06 LCMA login: root
Password:xxxxxx
04_00_06_LCMA:>>printenv -a
NAME
CS_TYPE
GWIP0_MTU_V4
GWIP0_NM_V4
GWIP0_V4
GWIP_FLAG
IP_VER
LD_PRIOR
LEIP00_NM_V4
LEIP00_V4
NE_NUM
NE_TYPE
REG_FLAG
REIP00_NM_V4
REIP00_V4
RSIP0_V4
SNMP_TRAP_IP_V4
FAP_X_SUB_V4
FAP_X_V4
__BOOTUP_FLAG__
VALUE
1
1484
24
10.0.119.1
0
4
0
30
10.0.119.153
1
ACR
1
30
10.0.119.157
10.0.26.10
10.0.26.10
255.255.255.0
10.89.12.41
0
2 WSM stop
2.
t
Generic
Generic
10
ACR1
RAS
ACR2
PI_WSM2
WSM2
// 23.30.159.0 G/W
// aceman user
11
Gateway
---------------60.10.0.4
60.10.0.5
60.10.0.5
60.10.0.5
60.10.0.4
60.10.0.1
127 0 0 1
127.0.0.1
Interface
2751
0
50
42
0
949
lo0
bge0
bge0
12
!
interfacege_0_8_1
ip address90.90.80.1/24
!
interfacelo
ip address127.0.0.1/8
ipv6address::1/128
!
interfacere_0_6_0
ip address100.100.100.100/32
!
ip route0.0.0.0/090.90.90.2
!
linecon0
login
linevty 09
login
!
Myend
13
emsuser
14
User Registration
15
16
17
18
19
2) Select the ACR ID you wish to grow, enter the ACR name, SNMP information and IP, and click Next.
20
Description
Parameter
Select Group
ACR ID
ACR TYPE
ACR NAME
PACKAGE VERSION
RELEASE VERSION
LOCATION
SNMP PORT
GET COMMUNITY
SET COMMUNITY
IP ADDRESS
21
3) On the basic ACR configuration, optional boards can be equipped/unequipped. If some boards are not mounted, select the figure of the
slot, and click Blank to configure the unequipped board. Although the board is not equipped, an alarm occurs if there is configuration
information. To select the type of the PEXA board, click the PEXA board, press the right mouse button, and select PEXA-M. PEXA-M is a type
of PEXA with 8 ports for the SPF type optic modules.
22
4) Select the port to be actually connected on the PEXA board which is the network interface, and enable the port.
23
24
25
7) Check the information entered. If the entered information is incorrect, you may correct input by selecting the Prev
Prev button. To grow ACR as
the setting, click Next. If you click the button, it is changed to Finish.
26
This section describes the ACR act to enable ACR functions after Grow ACR/loading and environment parameter
setting.
On the Map Viewer, select ACR to be activated, and select the right pop-up menu, and select Act NE.
27
Check if the command is executed properly, and the node is changed to the EQUIP status on the Map Viewer. + o
the icon disappears.
28
This section
Thi
i d
describes
ib the
h ACR D
Degrow ffunction.
i
To execute ACR Degrow, change the status of ACR from EQUIP to DEGROW.
In the DEGROW status, the ACR service is stopped, and only the configuration information is managed.
To delete ACR completely, select DEACT in the DEGROW status. If it is required to recover ACR from
perform ACT.
DEGROW to EQUIP, yyou should p
On the Map Viewer, select ACR to be degrown, select the pop-up menu with the right mouse button, and
select Degrow NE.
29
If the command is performed properly, the node is changed to DEGROW status on the Map Viewer, and - is marked
on the icon.
30
31
MRA-F1
MRA-F0
MMA-G
32
VALUE
DESCRIPTION
RUN_LEVEL
__BOOTUP_FLAG__
NE_TYPE
RAS
NE NUM
NE_NUM
IP_VER
DHCP_FLAG
GWIP_FLAG
RSIP0_V4
10.1.142.5
SNMP_TRAP_IP_V4
10.1.142.5
LEIP02_V4
10.2.166.3
LEIP02_NM_V4
24
GWIP02_V4
10.2.166.1
GWIP02_NM_V4
24
LEIP03_V4
10.2.166.3
LEIP03 NM V4
LEIP03_NM_V4
24
GWIP03_V4
10.2.166.1
GWIP03_NM_V4
24
RAS ID
Gateway IP
Gateway IP
33
login: root
Password: 123qwe
root@208_00_01_MMA-G_53:~#
setenv p NE_NUM
[RAS_ID]
setenv p LEIP02_V4
RAS_IP
setenv p LEIP02_NM_V4 Net_Mask
setenv p GWIP02_V4
Gateway IP
setenv p GWIP02_NM_V4 Net_Mask
_
RAS_IP
_
setenv p LEIP03_V4
setenv p LEIP03_NM_V4 Net_Mask
setenv p GWIP03_V4
Gateway IP
setenv p GWIP03_NM_V4 Net_Mask
setenv p RSIP0
RSIP0_V4
V4
WSM IP
setenv p SNMP_TRAP_IP_V4
WSM IP
34
35
36
37
38
39
RAS startup_config
[@WSM2:/pkg/2.0.3/ras/config/r
01]
vi startup_config_file_ras0001
!
noservicepasswordencryption
!
ip
p wns nbrquerytimer
q y
12
!
ip domainlookup
!
fib retain
fibretain
!
interfacege_0_1_2
ip reipcandidateoam
ip reipcandidater6
ip address90.90.80.2/24
!
interfacelo
ip address127.0.0.1/8
!
ip route0.0.0.0/090.90.80.1
!
linecon0
login
linevty 04
login
!
Myend
40
41