Documente Academic
Documente Profesional
Documente Cultură
What can be broadcast over the wireless network to help a user connect to the network
and use wireless services?
-SSID
During a review of the proposed bill of materials, the ABC Networking Company
account manager realizes that the systems engineer included a lower cost, less capable
switch model for the access layer connectivity than was specified by the network
designer. When questioned, the systems engineer responds that the switches that were
recommended by the designer cannot be purchased within the budget limitations of the
customer. Which action should the account manager take?
-Communicate any risks that are associated with the equipment substitution and obtain
customer approval to proceed.
When should a network designer specify that a dedicated firewall appliance be used at the
perimeter of the network rather than a router with a Cisco IOS software-based firewall
feature set?
-The network is large in size and network traffic can overload the device
A small bookstore would like to offer wireless connectivity for customers with laptops.
Which wireless components or devices will provide connectivity to the Internet for the
customers with the least possible cost to the bookstore?
-standalone access points
Several key servers in an organization must be directly accessible from the Internet. What
addressing policy should be implemented for these servers?
-Assign static internal addresses and public external addresses to each of the servers
During the network upgrade process a company is working with an individual who is
responsible for evaluating the current network, as well as testing and evaluating proposed
solutions. What is the main role of this individual?
-pre-sales systems engineer
Which two statements are true about hierarchical network design? (Choose two.)
-The core layer provides redundancy and load balancing
-The distribution layer is responsible for filtering and managing traffic flows
An advertising company is adding a remote site for a new sales team with three
employees. The company wants to transmit information securely across the public
network. Which two characteristics describe this connection? (Choose two.)
-It functions at the enterprise edge
-It tunnels encrypted data through the public network
A new WIC is installed in an available router slot. At what point during the router startup
process does the router test the card for hardware problems?
-during the POST
A configuration file needs to be loaded into the RAM of a router from a TFTP server.
What should an administrator know before accomplishing this task?
-the TFTP server IP address and the name of the configuration file on the server
After a WIC is installed in a two-slot router, the network engineer issues the show
running-config command, but the newly installed interfaces in the WIC cannot be seen
in the router output. What is a possible reason why the newly installed interfaces are not
shown?
-The WIC was not pushed completely into the slot
Which IOS command can a network designer use to help document the active routing
status of an existing network?
-show ip route
Refer to the exhibit. Based on the show cdp neighbors detail command, which interface
on Switch1 is connected to Router1?
-FastEthernet0/2
During the boot process and assuming the default sequence, what is the second location
where the router will look for the IOS?
-TFTP server
Which three items must be determined when upgrading the IOS on a router? (Choose
three.)
-device model
-quantity of DRAM
-available flash memory
What type of system uses a PBX for call control and connection to the PSTN?
-traditional telephony
What are two advantages of using a simulation tool to test an IP addressing scheme?
(Choose two.)
-Placement of subnets and route summarization can be verified.
-The addressing scheme can be tested for scalability.
A network administrator wants to configure a router that is running EIGRP so that it will
advertise a route that will summarize the networks that are shown. Which network will
summarize only these networks?
192.168.12.0/24
192.168.13.0/24
192.168.14.0/24
192.168.15.0/24
-192.168.12.0/22
What is a benefit of using CIDR to summarize multiple classful networks into a single
network?
- It reduces the number of entries in routing tables.
Refer to the exhibit. All interfaces are up and the directly connected networks appear in
the routing table of each router. What is the possible reason that there are no RIP entries
in the routing table?
-discontiguous networks
A network engineer is designing a LAN prototype for a medium-sized business. What
should be used to test the IP addressing scheme?
-network simulation tool
During prototype testing, a network engineer determines that the network can
successfully recover from a link or device failure. Which design goal has been validated
by the testing?
-availability
Refer to the exhibit. A network associate is configuring a new router to provide routing
between VLANs. The associate removes the router from the box and connects the Fa0/0
interface to a trunking port on the switch. After the configuration is applied to the router,
the traffic between VLANs still fails. What is causing this to occur?
-The subinterfaces of the router should have IP addresses applied
Refer to the exhibit. What does the JAX router do with traffic that is destined for a web
server with an IP address of 128.107.10.24?
-The traffic is sent out Serial 0/0/0
A user in a large office calls tech support to complain that the PC no longer connects to
the Internet or to any network resources, but seems otherwise normal. The help desk
technician asks the caller to talk to nearby users to see if other machines are affected.
After a few minutes, the caller reports that several immediate neighbors have the same
problem, but those seated further away do not. Assuming that the description is accurate,
what should be checked next?
-workgroup switch in the telecommunications room
Refer to the exhibit. All connections are working and CDP is enabled on all devices and
interfaces. On which device was the command issued?
-Sw2
Refer to the exhibit. An extended ACL has been created to deny traffic from the
192.168.30.0/24 network to the web server with IP address 209.165.201.30. According to
Cisco best practices, where should the ACL be applied?
-R3 Fa0/0 inbound
Refer to the exhibit. Following a test plan, the network systems engineer completes the
configuration of an access layer switch and connects three PCs to test the configuration.
The engineer attempts to ping from each PC to the other connected PCs. Which three
statements describe the expected results of pinging from one host to another? (Choose
three.)
-Host 1 cannot ping Host 2.
-Host 2 cannot ping Host 3
-Host 3 can ping Host 1
A nonroot switch has two paths to the root switch. One path is via the root port. Which
Rapid Spanning Tree role will the second port assume to prevent forwarding traffic?
-alternate
A web-based retail company is considering updating its WAN connection with new
technologies that are offered by the ISP. What testing platform should be used by the
network team of the company to validate the performance and capacity of the new
technology using real world data?
-pilot
While configuring a router with EIGRP, a technician enters the EIGRP command:
Router(config-router)# variance 3
While troubleshooting a Frame Relay link, the network administrator executes the show
ip interface brief command on both sides of the PVC link. All interfaces show a
configured IP address and that the line protocol is up. Further investigation reveals that
the IP address of the remote router does not appear in the Frame Relay table. Which step
would solve this problem?
-Configure the router using the frame-relay map ip command.
Refer to the exhibit. What can the field engineer conclude about the EIGRP
authentication between RouterA and RouterB?
-Authentication will succeed and EIGRP updates can be exchanged
When configuring Frame Relay, what identifies a virtual circuit to the WAN switch?
-DLCI
Refer to the exhibit. A pre-sales system engineer receives a diagram of the current WAN
from a customer. EIGRP is the routing protocol that is used on the WAN. Based on the
default operation of EIGRP, which statement is true about the routing table on router RE?
-There is a single route to the 172.18.20.0/24 LAN via the 10 Mb Ethernet connection
Which two events occur when the command RTA(config)# frame-relay map ip 10.1.1.1
22 is issued on a router? (Choose two.)
-A Layer 2 address is statically mapped to a Layer 3 address.
-RTA uses DLCI 22 to forward data to 10.1.1.1
Which component in a Frame Relay WAN would set the BECN bit in the Frame Relay
header if congestion is experienced?
-Frame Relay switch
Which two security best practices are recommended for a router deployed as a WAN
endpoint?
-Turn off unnecessary services
-Apply timeouts on VTY, AUX, and console ports
What is the result of implementing a Frame Relay service with a CIR value of zero?
-All frames that enter the Frame Relay WAN will be marked as DE
Refer to the exhibit. What can be determined about the operation of DLCI 101?
-The Frame Relay network is experiencing congestion.