Documente Academic
Documente Profesional
Documente Cultură
Hardware Description
Hardware Version: HV1.0
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2014 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Revision History
Revision No.
Revision Date
Revision Reason
R1.0
2014-11-17
First edition
SJ-20141127113509-002|2014-11-17 (R1.0)
Contents
About This Manual ......................................................................................... I
Chapter 1 External View............................................................................. 1-1
1.1 External Interfaces ............................................................................................. 1-1
1.2 Indicators........................................................................................................... 1-3
Glossary .......................................................................................................... I
I
SJ-20141127113509-002|2014-11-17 (R1.0)
II
SJ-20141127113509-002|2014-11-17 (R1.0)
Intended Audience
This manual is intended for:
l
l
View
ZXSDR R8872A.
Chapter 2, External
Cables
Related Documentation
The following documentation is related to this manual:
ZXSDR R8872A Macro Radio Remote Unit Hardware Installation
I
SJ-20141127113509-002|2014-11-17 (R1.0)
II
SJ-20141127113509-002|2014-11-17 (R1.0)
Chapter 1
External View
Figure 1-1 shows an external view of the ZXSDR R8872A.
Figure 1-1 ZXSDR R8872A External View
1. Indicator
Table of Contents
External Interfaces .....................................................................................................1-1
Indicators ...................................................................................................................1-3
1-1
SJ-20141127113509-002|2014-11-17 (R1.0)
Silk Screen
Interface
AISG /MON
DB15 interface
GND
ANT4 (TX/RX)
Transmitting/Receiving antenna
50 DIN-type connector
feeder interface
4
ANT3 (RX)
50 DIN-type connector
interface
5
ANT2 (RX)
50 DIN-type connector
interface
6
ANT1 (TX/RX)
Transmitting/Receiving antenna
50 DIN-type connector
feeder interface
Note:
The ANT1 provides the built-in NSBT function.
1-2
SJ-20141127113509-002|2014-11-17 (R1.0)
For a description of the interfaces on the sides of the ZXSDR R8872A, refer to Table 1-2.
Table 1-2 Description of Interfaces on the Sides
No.
Silk Screen
Interface
OPT1
OPT2
PWR
Customized connector
AC grounding terminal
1.2 Indicators
Panel indicators of the ZXSDR R8872A are located in the upper part of the chassis side,
see Figure 1-4. They indicate the operational status of the RRU.
1-3
SJ-20141127113509-002|2014-11-17 (R1.0)
Meaning
Color
Description
Operation
Green
indicator
ALM
Alarm
Red
indicator
OPT1
1 status
indicator
Optical port
Green
1-4
SJ-20141127113509-002|2014-11-17 (R1.0)
Silk
Screen
OPT2
Meaning
Color
Description
Optical port
Green
2 status
indicator
VSWR
Antenna port
Green/re
standing
wave ratio
indicator
ACT
Cell creation
Green/re
status
indicator
1-5
SJ-20141127113509-002|2014-11-17 (R1.0)
1-6
SJ-20141127113509-002|2014-11-17 (R1.0)
Chapter 2
External Cables
This chapter describes the external cables of the ZXSDR R8872A.
Table of Contents
Grounding Cable ........................................................................................................2-1
DC Power Cable ........................................................................................................2-1
Optical Fiber...............................................................................................................2-2
Antenna Feeder Jumper.............................................................................................2-3
AISG/MON Interface Cable ........................................................................................2-3
External View
The grounding cable is a 16 mm2 yellow/green cable. Figure 2-1 shows a grounding cable.
Figure 2-1 Protective Grounding Cable
Connection
One end of the grounding cable is connected to the grounding point on the chassis, and
the other end is connected to the grounding busbar.
External View
Figure 2-2 shows a DC power cable at one end of the ZXSDR R8872A.
2-1
SJ-20141127113509-002|2014-11-17 (R1.0)
Signals
For a description of the DC power cable signals, refer to Table 2-1.
Table 2-1 Descriptions of DC Power Cable Signals
Signal
Meaning
-48 V
-48 V power
Blue
-48 V GND
-48 V ground
Black
Connection
One end of the DC power cable is connected to the DC power supply interface inside the
maintenance cavity of the ZXSDR R8872A, and the other end is connected to an external
power supply device.
External View
Figure 2-3 shows an optical fiber.
Figure 2-3 Optical Fiber
Connection
When the optical fiber connects the RRU to the BBU, one end of the optical fiber is
connected to the optical port OPT1 inside the maintenance cavity on the equipment, and
the other end is connected to the optical port on the BBU.
When the optical fiber cascades RRUs, one end of the optical fiber is connected to the
optical port OPT2 inside the maintenance cavity of the upper-level RRU, and the other
end is connected to the optical port OPT1 inside the maintenance cavity of the RRU on
this level.
2-2
SJ-20141127113509-002|2014-11-17 (R1.0)
External View
The antenna feeder jumper is a 50 RF cable with the diameter of 1/2 and a DIN-type
connector. Figure 2-4 shows an antenna feeder jumper.
Figure 2-4 Antenna Feeder Jumper
Connection
One end of the antenna feeder jumper is connected to an antenna interface (ANT1 to
ANT4) on the ZXSDR R8872A, and the other end is connected to the interface that the
main feeder corresponds to.
External View
Figure 2-5shows an AISG/MON interface cable at one end of the ZXSDR R8872A.
Figure 2-5 AISG/MON Interface Cable
Connection
One end of the AISG/MON interface cable is connected to the AISG/MON interface on the
ZXSDR R8872A, and the other end is connected to an external device (AISG interface,
monitoring dry-contact input device, monitoring RS485 device) or a debugging computer.
2-3
SJ-20141127113509-002|2014-11-17 (R1.0)
2-4
SJ-20141127113509-002|2014-11-17 (R1.0)
Glossary
AISG
- Antenna Interface Standards Group
BBU
- Base Band Unit
LMT
- Local Maintenance Terminal
NSBT
- NodeB-Side Smart Bias Tee
RRU
- Remote Radio Unit
VSWR
- Voltage Standing Wave Ratio
I
SJ-20141127113509-002|2014-11-17 (R1.0)