Documente Academic
Documente Profesional
Documente Cultură
a. Receive voltage
b. Field strength
c. Magnetic induction
d. Power density
b. Angle of elevation
c. Right angle
d. Beamwidth
b. Bidirectional
c. Unidirectional
d. Hemispherical
b. Half-wave dipole
c. Isotropic
d. Whip
b. A sphere
d. A parabola
b. Yagi
c. Hertz
d. Rhombic
7. What is a term for an antenna element which is supplied power from a transmitter through a
transmission line?
a. Parasitic element
b. Director element
c. Driven element
d. Reflector element
b. Folded dipole
c. Ferrite loop-stick
b. SWR
c. reflected signal
b. 3 dB
c. 10 dB
d. infinite
b. parasitic
c. driven
b. capacitive
c. inductive
d. infinite
d. vertically polarized
16. Radio wave concentration in the direction of the signal emitted by a directional antenna.
a. major lobe
c. transmitted signal
b. zenith
c. far-field region
d. near-field region
18. When a parasitic element is longer than the driven element it is called __________.
a. reflector
b. director
c. radiator
19. An antenna array where all elements are connected to the feedline.
a. phased array
b. parasitic array
c. driven array
d. linear array
20. A type of antenna that has a physical length equivalent to one half wavelength of the radio
frequency being used.
a. Yagi
b. Hertz
c. Rhombic
d. Marconi
21. _____ is an antenna array which is highly directional at right angles to the plane of the
array?
a. Broadside array
b. End-fire array
c. Turnstile array
d. Log-periodic array
22. What is the minimum number of turns a helix antenna must have?
a. 3
b. 5
c. 4
d. 6
b. Reflector element
c. Director element
d. Parasitic element
b. Antenna gain
c. Beamwidth
d. Bandwidth
25. In what range of frequencies are most omnidirectional horizontally polarized antennas
used?
a. VHF, UHF
b. VLF, LF
c. SH, EHF
d. MF, HF
b. Increased gain
d. All of these
b. anechoic chamber
c. vacuum chamber
c. RF reflective chamber
b. LC network
c. loading coil
29. These are employed when the relative position of the other station is unknown or arbitrary.
a. omnidirectional antenna b. directional antenna
c. resonant antenna
d. non-resonant antenna
b. discone antenna
c. monopole antenna
d. loop antenna
31. Known as the technique for adding a series inductor at or near the center of an antenna
element in order to cancel the capacitive reactance of an antenna
a. Dipole
b. Center loading
c. Reflector
d. Loading coil
a. region
b. sector
c. lobe
d. radial
33. A configuration of multiple antenna elements arranged to achieve a given radio pattern.
a. antenna array
b. element pattern
c. array pattern
34. __________is the interface between the transmission line and space.
a. feedline
b. antenna
c. radial
1. B
2. A
3. B
4. A
5. B
6. B
7. C
8. A
9. C
10. A
11. D
12. A
13. D
14. A
15. B
16. A
17. B
18. A
19. A
20. B
21. A
22. A
23. D
24. C
25. A
26. D
27. B
28. D
29. A
30. B
31. D
32. C
33. A
34. B
35. C