Documente Academic
Documente Profesional
Documente Cultură
Contents
Introduction 2
New Products 7
Spray Heads 9
Rotary Nozzles 49
Rotors 53
Impacts 113
Valves 121
Controllers 157
Accessories 265
Reference 283
Warranties 296
Table of Contents
www.rainbird.com 1
Introduction
2 www.rainbird.com
Introduction
WATER WASTE PROBLEM SOLUTION BENEFITS SPRAY HEADS & ROTORS VALVES & CONTROLLERS OTHER
Misting, fogging Pressure regulating devices Maintain constant optimal water pressure to prevent misting • 1800 ®-PRS (R/C) • PRS-Dial (R/C) • Drip Control
(due to high pressure) and evaporation of water due to high pressure. Every 5 psi • 1800-SAM-PRS (R/C) Zone Kit (R/C)
reduction in pressure reduces water usage by 6-8%. • 1800 PCS Screens (R/C) • TSJ-PRS (R/C)
Run-off Seal-A-Matic™/check Prevent water from draining out of the irrigation • UNI-Spray™ with SAM (R) • ACV Adjustable
(due to compacted soil, valve products system at the lowest head, eliminating puddling, • 1800-SAM (R/C) Check Valves
slopes or over-watering) erosion and run-off. • 1800-SAM-PRS (R/C) (R/C)
• 3500-SAM (R)
• 5000-SAM (R/C)
• 5505-SAM (R/C)
• R-50-SAM (R/C)
• 6504-SAM (C)
• 7005-SAM (C)
• 8005-SAM (C)
High efficiency nozzles Provide uniform distribution of water, eliminating • U-Series Nozzles (R/C)
run-off on slopes or compacted soil and reducing • Rain Curtain™ Nozzles (R/C)
water usage up to 30%. • Rotary Nozzles (R/C)
• 5000/5000 Plus MPR
Nozzles (R/C)
Controllers with multiple Allow several shorter and more precise run times to • All Controllers (R/C)
start times prevent run-off and puddles.
Controllers with Applies water at a rate that the soil can more easily • ESP-MC (C) • Maxicom 2 (C)
Cycle + Soak ™ absorb, reducing erosion, run-off and waste. • IM Controller (C) • SiteControl (C)
Direct-to-plant-root Deliver precise amounts of water at or near plant root • Landscape Drip/
watering devices zones for maximum efficiency. By providing nourishment Xerigation
directly to root systems, water is used more efficiently, products (R/C)
plants are healthier, and run-off and over-spray are • Root Watering
eliminated. System (R/C)
• Irrigation
Supplement (R/C)
Over-watering Automatic shut-off devices Automatically shut off the controller when it is raining • Rain Sensor (R/C)
(due to weather and or when sufficient soil moisture is detected, resulting • Moisture Sensor
seasonal changes) in water savings of 15-20%. (R/C)
Controllers with Postpones the irrigation schedule when watering isn’t • ESPLX+/LXi+ (R/C) • Maxicom 2 (C)
Rain Delay feature needed and automatically resumes watering when • ESP-MC (C) • SiteControl (C)
appropriate. • IM Controller (C) • MDC (C)
Controllers with Provides easy and flexible adjustments to the amount • Ec (R) • Maxicom 2 (C)
Water Budget feature of water used for irrigation to accommodate seasonal • ESP Modular (R) • SiteControl (C)
changes. • ESPLX+/LXi+ (R/C) • MDC (C)
• ESP-MC (C)
• IM Controller (C)
Controllers with Enables the controller to apply only the water required • IM Controller (C) • Maxicom 2 (C)
ET Programming by the landscape to reduce water consumption and • SiteControl (C)
maintain a healthy landscape.
Over-watering Controllers with multiple Offer the flexibility to water various landscape zones at • Ec (R) • Maxicom 2 (C)
(due to varying plant independent programs different times and for varying durations to prevent • ESP (R) • SiteControl (C)
types and environmental water waste. • ESP Modular (R) • MDC (C)
conditions) • ESP-LX+/LXi+ (R/C)
• ESP-MC (C)
• IM Controller (C)
Direct-to-plant-root watering Offer the flexibility of applying different amounts of • Landscape Drip/
devices water to plants based on their individual needs. Xerigation
products (R/C)
www.rainbird.com 3
Introduction
In the “How to Use This Catalog” section, we introduce you to elements you will likely encounter
At the beginning of each section, we’ve included product application matrices. These are general
guides to the products’ primary areas of use and are intended to help you choose the right
We have included formulas showing how we calculate precipitation rates, as well as lists of
4 www.rainbird.com
Introduction
Specification Information
The information in this catalog was accurate at the time of printing and may be used
for proper specification of each product. For the most up-to-date information, go to
Rain Bird’s web site at www.rainbird.com.
Abbreviations
The following abbreviations are used throughout this catalog:
www.rainbird.com 5
Introduction
6 www.rainbird.com
Introduction
New Products
New products are located on the following pages:
Rotors
Snap-ring Pliers page 112 Selector page 112 Valve Insertion page 112
Valve Key Tool and
Installation Socket
Valves
Jar Top Valves page 128 PESB-R page 134 UVMS page 150 BW-JTV page 152
with Flow Control; Valves for Use with Union Valve JTV Bonnet Tool
Male x Male and Reclaimed Water Manifold System
Male x Barb Fittings
www.rainbird.com 7
Introduction
8 www.rainbird.com
Spray Heads
Rotary Nozzles
Spray Heads
Rotors
Impacts
Valves
Controllers
Contractors and specifiers choose Rain Bird® spray heads and nozzles more often than all
other brands combined. For some, the reason is a proven track record of performance
that spans nearly three decades. Others praise the reliability, the durability or nearly 90 Commercial
Pump Stations
nozzle options. Whatever the reason, Rain Bird spray heads and nozzles continue to be
Install Confidence. ®
Landscape Drip/
® Xerigation
Install Rain Bird Spray Heads and Nozzles.
Accessories
Resources
& Training
Reference
Spray Heads
Major Products
1802 1803 1804 1806 1812 1800 1800 1800 US-200 US-400 US-600 PA-8S PA-8S-PRS 1300/1400
PRS SAM SAM-PRS Bubblers
Primary Applications
Turfgrass • • • • • • • • • •
Slopes • • • • • • •* •* •* • •
Ground Cover/Shrubs • • • • • • • • • • • • • •
High Pressure Systems • • • •
Low Pressure Systems • • • • • • • • • •
High Wind Areas • • • •
Spray Heads
10 www.rainbird.com
Spray Heads
8000
CYCLE SURGE DURABILITY TEST
6000
CYCLES
4000
Install25
Install 25years
yearsof
of unrivaled
unrivaledperformance.
performance. 2000
0
Rain Bird 1804 Competitor A Competitor B
S P R AY H E A D
Trust that when you install
Rain Bird® 1800 Spray Heads, you Cycle Surge is a measure of material endurance.
Spray heads continuously cycled at 200 psi (14 bars),
can confidently expect that these 3 seconds on, 2 seconds off.
products will be more durable
2
than the competition, will be far
more reliable, and will deliver
superior performance time after 2 Times More Reliable
time after time. Here are just
ACCELERATED LIFE CYCLE TEST
a few reasons why:
Test Stopped
16,000
12,000
1800 Series
CYCLES
(5,1; 7,6; 10,2; 15,2; 30,5 cm). plastic and corrosion-resistant stainless
PRS and SAM options available steel parts, assuring long product life. 4,000
1
quality and assures customer peace
of mind. #1 in Performance
The Rain Bird 1800-SAM Series outperforms
Proven co-molded wiper seal that
completely eliminates a potential leak all competitors with an average hold back
path (between the cap and seal), of 14 feet (4,3 m).
retains its shape cycle after cycle, and The Rain Bird 1800-PRS Series maintains
has the lowest “flow-by” which allows a more consistent outlet pressure of 30 psi
more heads to be installed on the (2,1 bars), across a wider range of inlet
same valve. pressures than the competition.
Advanced ratchet mechanism employs * Based on tests conducted at Rain Bird’s Product
Research Center in Glendora, CA. Test results reflect a
a separate adjustment ring which
comparison of Rain Bird’s products with those of its
prevents wear and reliably maintains principal competitors.
alignment.
Spray Heads
www.rainbird.com 11
Spray Heads
Reduces water loss by 70% if the nozzle is removed or damaged— With PRS Without PRS
the result is a reduction in property damage due to flooding. Restricts water loss up to 70% if
nozzle is removed or damaged
Spray Heads
12 www.rainbird.com
Spray Heads
Install Confidence. ™
™
®
®
Install Rain Bird
U-Series Nozzles.
Planto
Plan touse
use30%
30%less
less water.*
water.*
You can confidently expect that when you install patented U-Series
nozzles from Rain Bird® you will reduce watering run times which in
result from the most uniform water distribution available for spray
heads. This is the only plastic nozzle with a dual-orifice design that
Water flowing from both orifices* An easy, cost-effective retrofit U-Series nozzles fit all Rain Bird spray
eliminates gaps for more solution to eliminate dry spots heads and shrub adapters, and can
uniform coverage around the spray heads be used with Rain Bird PCS screens
Matched precipitation rates across New 8' and 10' (2,4 m 3,1 m) nozzles * When U-Series dual orifice nozzles are installed instead of
standard nozzles on every spray head in the zone. Results may
pattern and radii with U-Series, MPR in Q, T, H, and F patterns expand the vary based on site-specific conditions such as sprinkler spacing,
wind, temperature, soil and grass type.
and VAN nozzles provide flexibility in U-Series product line that also
design and installation includes 12' and 15' (3,4 m and 4,6 m)
nozzles in standard patterns
Spray Heads
www.rainbird.com 13
Spray Heads
Advancednozzle
Advanced nozzletechnology
technology Going head-to-head
assuressuperior
assures superiorwater
waterdistribution.
distribution. against the competition.
The benefit of Rain Bird® U-Series nozzles is clearly visible
in side-by-side comparisons with standard, single-orifice
spray nozzles. The second orifice on the U-Series allows for
Rain Bird® U-Series nozzles produce superior close-in watering. With the efficiency of U-Series
2
spray patterns from two orifices to nozzles, you may reduce watering times by more than 30%. 1
Spray Heads
14 www.rainbird.com
Spray Heads
1800® Series
Radius reduction screw
2", 3", 4", 6", 12" (5,1 cm; 7,6 cm; 10,2 cm; 15,2 cm; 30,5 cm)
Plastic MPR nozzle and screen
Co-molded wiper seal is molded to cap and features an encased
plastic “cage” to provide unmatched resistance to grit, pressure, Co-molded, pressure-activated wiper seal
and the environment. Additionally, the pressure-activated,
multi-function seal design assures a positive seal without excess
“flow-by” which enables more heads to be installed on the
same valve.
Strong stainless steel retract spring
Strong stainless steel spring provides reliable stem retraction.
Features
•Precision controlled flush at pop-down clears debris from unit,
assuring positive stem retraction in all soil types.
•Pre-installed orange 1800 Pop-Top™ flush plug blocks debris, larger Side inlet on 1806 and 1812 models
than nozzle filter screen openings, from entering after flushing.
Allows for easy nozzle installation.
•Constructed of time-proven UV-resistant plastic and corrosion Patented PRS in-stem pressure regulator option
resistant stainless steel parts, assuring long product life.
•All sprinkler components are removable from the top without Two-Piece
special tools, providing for quick and easy flushing and Ratchet
maintenance of the sprinkler. Adjustment Ring
(for easy nozzle
•Side and bottom inlets featured on 1806 and 1812 models. pattern
•Five-year trade warranty. alignment
and durability)
Operating Range
SAM
•Spacing: 3 to 20 feet (0,9 to 6,1 m) (Seal-A-Matic ™)
•Pressure: 15 to 70 psi (1,0 to 4,8 bars) in-stem check
valve option
Specifications
•Flow-by: 0 at 8 psi (0,6 bar) or greater;
0.10 GPM (0,02 m3/h; 0,006 l/s) otherwise
Dimensions/Models
• 1⁄ 2" (15/21) NPT female threaded inlet
•Models and height:
1802: 4" (10,2 cm) body height; 2" pop-up height (5,1 cm)
1803: 47⁄ 8" (12,4 cm) body height; 3" pop-up height (7,6 cm) 1804 - 15H
1804: 6" (15,2 cm) body height; 4" pop-up height (10,2 cm)
1806: 93⁄ 8" (23,8 cm) body height; 6" pop-up height (15,2 cm)
Nozzle Series/Pattern
1812: 16" (40,6 cm) body height; 12" pop-up height (30,5 cm) 15H
15 Series
•Exposed surface diameter: 21⁄ 4" (5,7 cm) MPR nozzle with
half-circle pattern
Model
1804
4" (10,2 cm)
pop-up
height
1800 Series
Spray Heads
www.rainbird.com 15
Spray Heads
4", 6", 12" (10,2 cm, 15,2 cm, 30,5 cm) 4", 6", 12" (10,2 cm, 15,2 cm, 30,5 cm)
Built-in Seal-A-Matic™ (SAM) check valve. Eliminates the need for Patented PRS pressure regulator built into the stem. No parts to be
under-the-head check valves. No parts to be installed at the site. installed at the site. Saves time and money.
Traps water in lateral pipes in elevation changes of up to 14 feet Maintains constant outlet pressure at 30 psi (2,1 bars). Spray heads
(4,2 m). Reduces wear on system components by minimizing and nozzles perform best at 30 psi. Ensures maximum spray head
water hammer during start-up. and nozzle performance, even with varying inlet pressures.
Maintains constant pressure regardless of nozzle used.
Even stronger retract spring to accommodate elevation changes up
to 14 feet (4,2 m). One of the strongest springs in the industry. Ends misting and fogging caused by high pressure. Stops water
waste. Ensures necessary watering occurs in high pressure or wind
conditions.
Features
•Prevents drainage from spray heads at lower elevations. Stops water
Features
waste. Ends landscape damage due to flooding and/or erosion.
•Restricts water loss by up to 70% if nozzle is removed or damaged.
•Designed for use with all Rain Bird plastic spray head nozzles.
Saves water and money. Reduces possibility of accidents and
•“SAM” stamped on cap for easy identification and maintenance. property damage. Recommended for vandal prone areas.
•Five-year trade warranty. •Designed for use with all Rain Bird plastic spray head nozzles.
•“PRS” stamped on cap for easy identification and maintenance.
Operating Range
•Five-year trade warranty.
•Spacing: 3 to 20 feet (0,9 to 6,1 m)
•Pressure: 25 to 70 psi (1,7 to 4,8 bars) Operating Range
•Spacing: 3 to 20 feet (0,9 to 6,1 m)
Specifications
•Pressure: 15 to 70 psi (1,0 to 4,8 bars)
•SAM capability: holds up to 14 feet (4,2 m) of head; 6 psi (0,4 bar)
•Flow-by: 0 at 8 psi (0,6 bar) or greater; 0.50 GPM Specifications
(0,11 m3/h; 0,03 l/s) otherwise
•Regulates nozzle pressure to an average 30 psi (2,1 bars) with inlet
•SAM operable only when installed by bottom inlet pressures of up to 70 psi (5,0 bars) (see graph)
•Flow-by: 0 at 8 psi (0,6 bar) or greater; 0.10 GPM
Dimensions (0,02 m3/h; 0,006 l/s) otherwise
• 1⁄ 2" (15/21) female threaded inlets •Installation: side or bottom inlet
•Body height: •Side inlet installation not recommended in freezing climates
1804 SAM: 6" (15,2 cm)
1806 SAM: 93⁄ 8" (23,8 cm)
1812 SAM: 16" (40,6 cm)
•Exposed surface diameter:
21⁄ 4" (5,7 cm)
Models
•1804 SAM: 4" pop-up height (10,2 cm)
•1806 SAM: 6" pop-up height (15,2 cm)
•1812 SAM: 12" pop-up height (30,5 cm)
Spray Heads
16 www.rainbird.com
Spray Heads
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 17
Spray Heads
UNI-Spray™ Series
Radius reduction screw 2", 4", 6" (5,1 cm, 10,2 cm, 15,2 cm)
Removable variable arc
(VAN) nozzle and screen Pressure-activated, wiper seal prevents excessive flow-by and water
waste. Keeps debris from entering upon retraction.
Durable two-piece stem ratchet allows for quick and easy nozzle
Pressure-activated, pattern alignment.
multi-functional wiper seal
Rugged cover and body provide durability in high pressure and
surge conditions.
How To Specify
UNI-Spray
US - 4 - 15VAN
Nozzle Series/Pattern
VAN nozzle with
variable arc
Body
4"(10,2 cm)
Model
UNI-Spray
18 www.rainbird.com
Spray Heads
Specifications
•Flow-by: 0 at 10 psi (0,75 bar) or greater;
0.20 GPM (0,04 m3/h; 0,01 l/s) otherwise
Dimensions
•1⁄ 2" (15/21) NPT female threaded inlet
•Body height:
US-200: 33⁄ 4" (9,5 cm)
US-400: 5 7⁄ 8" (14,9 cm)
US-600: 81⁄ 4" (21,0 cm)
•Exposed surface diameter: 11⁄ 4" (3,2 cm)
Models*
•US-200: 2" pop-up height (5,1 cm)
•US-400: 4" pop-up height (10,2 cm)
•US-600: 6" pop-up height (15,2 cm)
•US-210 VAN 2" pop-up height (5,1 cm) with 10-VAN attached
•US-410 VAN 4" pop-up height (10,2 cm) with 10-VAN attached
•US-610 VAN 6" pop-up height (15,2 cm) with 10-VAN attached
•US-212 VAN 2" pop-up height (5,1 cm) with 12-VAN attached
•US-412 VAN 4" pop-up height (10,2 cm) with 12-VAN attached
•US-612 VAN 6" pop-up height (15,2 cm) with 12-VAN attached
•US-215 VAN 2" pop-up height (5,1 cm) with 15-VAN attached
•US-415 VAN 4" pop-up height (10,2 cm) with 15-VAN attached
•US-615 VAN 6" pop-up height (15,2 cm) with 15-VAN attached
•US-418 VAN 4" pop-up height (10,2 cm) with 18-VAN attached
•US-SAM UNI-Spray™ field installed check valve
* The UNI-Spray™ sprinkler body accepts all Rain Bird nozzles.
Spray Heads
www.rainbird.com 19
Spray Heads
Features
•1800 Series white filter (.035" x .035") screens (shipped with
nozzles) maintain precise radius adjustment and prevent clogging.
(5 and 8 Series nozzles are shipped with blue fine-mesh
(.02" x .02") filter screens.)
•Stainless steel adjustment screw to adjust flow and radius.
Operating Range
•Spacing: 3 to 20 feet (0,9 to 4,6 m) Re-sealable Nozzle Packaging
•Pressure: 15 to 30 psi (1 to 2,1 bars)
•Optimum pressure: 30 psi (2,1 bars)*
* Rain Bird recommends using 1800 PRS spray heads to maintain optimum nozzle
performance in higher pressure situations.
Models
•5 Series
•5 Series: bubbler nozzles
•8 Series
•8 FLT Series
•10 Series
•12 Series
•15 Series
•15 Strip Series
•16 Series: stream spray
•22 Series: standard stream spray
Spray Heads
20 www.rainbird.com
Spray Heads
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 21
Spray Heads
Spray Heads Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
22 www.rainbird.com
Spray Heads
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 23
Spray Heads
Spray Heads Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
24 www.rainbird.com
Spray Heads
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 25
Spray Heads
Spray Heads Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
26 www.rainbird.com
Spray Heads
5 Series MPR Stream Bubbler Nozzles 5 Series MPR Stream Bubbler Nozzles METRIC
0° Trajectory 0° Trajectory
Nozzle Pressure Radius Flow Nozzle Pressure Radius Flow Flow
psi ft. GPM bars m m3⁄h l/s
5F-B 15 5 1.50 5F-B 1,0 1,5 0,35 0,09
20 5 1.50 1,5 1,5 0,35 0,09
25 5 1.50 2,0 1,5 0,35 0,09
30 5 1.50 2,1 1,5 0,35 0,09
5H-B 15 5 1.00 5H-B 1,0 1,5 0,23 0,06
20 5 1.00 1,5 1,5 0,23 0,06
25 5 1.00 2,0 1,5 0,23 0,06
30 5 1.00 2,1 1,5 0,23 0,06
5Q-B 15 5 0.50 5Q-B 1,0 1,5 0,12 0,03
20 5 0.50 1,5 1,5 0,12 0,03
25 5 0.50 2,0 1,5 0,12 0,03
30 5 0.50 2,1 1,5 0,12 0,03
5CST-B 15 5 0.50 5CST-B 1,0 1,5 0,12 0,03
20 5 0.50 1,5 1,5 0,12 0,03
25 5 0.50 2,0 1,5 0,12 0,03
30 5 0.50 2,1 1,5 0,12 0,03
Note: Indicates adjusted radius at psi shown.
Note: Flow at adjusted radius of 5 feet (1,5 m).
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 27
Spray Heads
Spray Heads Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
28 www.rainbird.com
Spray Heads
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 29
Spray Heads
Spray Heads Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
30 www.rainbird.com
Spray Heads
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 31
Spray Heads
Operating Range
•Spacing: 5 to 15 feet (1,8 to 4,6 m)
•Pressure: 15 to 30 psi (1,0 to 2,1 bars)
•Optimum pressure: 30 psi (2,1 bars)*
* Rain Bird recommends using 1800 PRS spray heads to maintain optimum
nozzle performance in higher pressure situations.
U-Series Nozzle
How To Specify
1804 - U 12H U-Series Nozzle
Spray Heads
32 www.rainbird.com
Spray Heads
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 33
Spray Heads
Spray Heads Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
34 www.rainbird.com
Spray Heads
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 35
Spray Heads
Features Features
•Fully adjustable flow. •Low flow rates allow water to be absorbed as needed. Reduces runoff.
•Shipped with SR-050 1⁄ 2" (15/21) inlet filter screen for easy •Flow will not fluctuate at pressures between 20 and 90 psi
installation and resistance to debris. (1,4 to 6,2 bars). Maintains even flow.
•Operates over a wide range of pressures. •Flow is not adjustable for increased vandal resistance.
•Non-corrosive plastic and stainless steel construction for long life. •No adjustment required.
•Five-year trade warranty. •Corrosion-proof plastic and rubber construction for long life.
•Five-year trade warranty.
Operating Range •Shipped with special SR-050 1⁄ 2" (15/21) bubbler filter screen for easy
•Flow: 1.0 to 2.3 GPM (0,23 to 0,52 m3⁄h; 0,06 to 0,14 l/s) installation and resistance to debris.
•Spacing: 1 to 3 feet (0,3 to 0,9 m) •Trickle pattern on models 1401 and 1402; umbrella pattern on
•Pressure: 10 to 60 psi (0,7 to 4,1 bars) models 1404 and 1408.
Model Dimensions
•1300A-F • 1⁄ 2" (15/21) female threaded inlet
•Height: 1" (2,5 cm)
•Top diameter: 1" (2,5 cm)
1300A-F 1300A-F METRIC
Models
Nozzle Pressure Flow Nozzle Pressure Radius Flow
psi GPM bars m3⁄h l/s •1401: 0.25 GPM (0,06 m3⁄h; 0,02 l/s); full-circle, trickle pattern
F 10 1.0 F 0,7 0,23 0,06 •1402: 0.50 GPM (0,11 m3⁄h; 0,03 l/s); full-circle, trickle pattern
20 1.4 1,0 0,26 0,07 •1404: 1.00 GPM (0,23 m3⁄h; 0,06 l/s); full-circle, umbrella pattern
30 1.7 1,5 0,30 0,08 •1408: 2.00 GPM (0,46 m3⁄h; 0,12 l/s); full-circle, umbrella pattern
40 1.9 2,0 0,34 0,09
50 2.1 2,5 0,39 0,10
60 2.3 3,0 0,43 0,12
3,5 0,48 0,13
4,0 0,52 0,14
4,1 0,53 0,14
1400 Series
1300A-F
Spray Heads
36 www.rainbird.com
Spray Heads
Operating Range
•Flow: 0.10 to 3.70 GPM (0,05 to 0,84 m3/h; 0,01 to 0,23 l/s)
•Pressure: 15 to 70 psi (1,0 to 4,8 bars)
Models
•PCS-008: 0.08 GPM (0,02 m3/h; 0,01 l/s) - Beige
•PCS-010: 0.1 GPM (0,02 m3/h; 0,01 l/s) - Purple
•PCS-020: 0.2 GPM (0,05 m3/h; 0,01 l/s) - Brown
•PCS-025: 0.25 GPM (0,06 m3/h; 0,02 l/s) - Pink
•PCS-030: 0.3 GPM (0,07 m3/h; 0,02 l/s) - Silver
•PCS-040: 0.4 GPM (0,09 m3/h; 0,03 l/s) - Orange
•PCS-060: 0.6 GPM (0,14 m3/h; 0,04 l/s) - Black
•PCS-090: 0.9 GPM (0,20 m3/h; 0,06 l/s) - White
•PCS-125: 1.25 GPM (0,28 m3/h; 0,08 l/s) - Green
•PCS-175: 1.75 GPM (0,40 m3/h; 0,11 l/s) - Yellow
•PCS-260: 2.6 GPM (0,59 m3/h; 0,16 l/s) - Blue
•PCS-370: 3.7 GPM (0,84 m3/h; 0,23 l/s) - Red
Spray Heads
www.rainbird.com 37
Spray Heads
U-12F 3' (0,9) 6' (1,8) 8' (2,4) 9' (2,7) 11' (3,4) 12' (3,7)
U-15Q 2' (0,6) 6' (1,8) 11' (3,4) 15' (4,6)
U15T 10' (3,0) 13' (4,0) 14' (4,3) 15' (4,6)
U-15H 2' (0,6) 3' (0,9) 5' (1,5) 9' (2,7) 12' (3,7) 15' (4,6)
U15TT 11' (3,4) 12' (3,7) 13' (4,0) 14' (4,3)
U15TQ 9' (2,7) 11' (3,4) 13' (4,0) 14' (4,3)
U-15F 4' (1,2) 6' (1,8) 7' (2,1) 10' (3,1) 13' (4,0) 15' (4,6)
4 (90°) 1' (0,3) 3' (0,9) 4' (1,2)
4 (180°) 1' (0,3) 2' (0,6) 3' (0,9) 4' (1,2)
4 (270°) 1' (0,3) 2' (0,6) 4' (1,2)
4 (330°) 1' (0,3) 2' (0,6) 4' (1,2)
6 (90°) 1' (0,3) 3' (0,9) 6' (1,8)
6 (180°) 2' (0,6) 4' (1,2) 6' (1,8)
6 (270°) 0.5' (0,2) 1' (0,3) 3' (0,9) 6' (1,8)
6 (330°) 0.5' (0,2) 1' (0,3) 3' (0,9) 6' (1,8)
8 (90°) 1' (0,3) 3' (0,9) 8' (2,4)
8 (180°) 0.5' (0,2) 2' (0,6) 4' (1,2) 8' (2,4)
8 (270°) 0.5' (0,2) 3' (0,9) 5' (1,5) 8' (2,4)
8 (330°) 0.5' (0,2) 3' (0,9) 5' (1,5) 8' (2,4)
10 (90°) 3' (0,9) 5' (1,5) 10' (3,1)
VAN
Spray Heads Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
38 www.rainbird.com
Spray Heads
15CST 4' x 12' (1,2 x 3,7) 4' x 24' (1,2 x 7,3) 4' x 30' (1,2 x 9,1) 4' x 30' (1,2 x 9,1)
15SST 2' x 10' (0,6x 3,1) 3' x 20' (0,9 x 6,1) 4' x 26' (1,2 x 7,9) 4' x 30' (1,2 x 9,1)
15EST 3' x 12' (0,9 x 3,7) 4' x 15' (1,2 x 4,6)
Bold type indicates recommended nozzle/screen combination to achieve catalog performance at 30 psi (2,1 bars).
Note: Screens were tested at 50 psi (3,5 bars) for 10 minutes prior to taking distance measurements. Distances may vary slightly with higher pressures and longer run times.
Note: Refer to catalog notation for proper nozzle selection.
Performance data derived from tests that conform with ASAE Standards; Spray Heads
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 39
Spray Heads
Spray Head Accessories
SA Series
Spray Heads
40 www.rainbird.com
Spray Heads
Spray Head Accessories
Specifications
•Inside diameter: 0.49".
•Operating pressure up to
80 psi and 110° F.
Models
•SPX-100 SPX-FLEX100
•SPX-FLEX100
MSE Series
Street Elbow
Features
•Black, high density polyethylene.
•High performance, impact-resistant plastic.
•Schedule 40 construction.
Specifications
•Operating pressure up to 80 psi at 110° F.
Models
•MSE-050: 1⁄ 2" (15/21) F x M NPT street elbow
•MSE-075: 3⁄ 4" (20/27) F x M NPT street elbow
MSE-075
Spray Heads
www.rainbird.com 41
Spray Heads
Spray Head Accessories
SB Series
Spiral Barb Fittings
Specifications
•Up to 80 psi and 110° F.
Models
•SBE-050: 1⁄ 2" (15/21) M NPT x 1⁄ 2" barb elbow
•SBE-050B: 1⁄ 2" (15/21) M NPT x 1⁄ 2" barb elbow - bulk package
•SBE-075: 3⁄ 4" (20/27) M NPT x 1⁄ 2" barb elbow
•SBE-075B: 3⁄ 4" (20/27) M NPT x 1⁄ 2" barb elbow - bulk package SBE-050 SB-TEE SBA-075
•SBA-050: 1⁄ 2" (15/21) M NPT x 1⁄ 2" barb adapter
•SBA-075: 3⁄ 4" (20/27) M NPT x 1⁄ 2" barb adapter SB Series
•SB-TEE: 1⁄ 2" barb x 1⁄ 2" barb x 1⁄ 2" barb tee
•SB-CPLG: 1⁄ 2" barb x 1⁄ 2" barb coupling
•SBFE-050: 1⁄ 2" (15/21) F NPT x 1⁄ 2" barb elbow
•SB-NPT-TEE: 1⁄ 2" (15/21) M NPT x 1⁄ 2" barb x 1⁄ 2" spiral barb tee
PA-8S PA-8S-NP
Plastic Shrub Adapter Non-Potable Plastic Shrub Adapter
Features Features
1
•Adapts Rain Bird nozzles for use with ⁄ 2" (15/21) MPT •Purple plastic shrub adapter for easy identification of a
threaded risers. non-potable water system.
•Accepts protective, non-clogging 1800 Series filter screen (shipped •Adapts Rain Bird nozzles for use with 1⁄ 2" (15/21) MPT
with nozzle) and PCS Series screens. threaded risers.
•Durable, non-corrosive plastic construction. •Accepts protective, non-clogging 1800 Series filter screen (shipped
with nozzle) and PCS Series screens.
Specifications •Durable, non-corrosive plastic construction.
• 1⁄ 2" (15/21) female inlet threads
•Fine top threads accept all Rain Bird nozzles Specifications
• 1⁄ 2" (15/21) female inlet thread
Model •Fine top threads accept all Rain Bird nozzles
•PA-8S
Model
•PA-8S-NP
PA-8S PA-8S-NP
Spray Heads
42 www.rainbird.com
Spray Heads
Spray Head Accessories
PA-8S-PRS Specifications
Pressure Regulating Shrub Adapter • 1⁄ 2" (15/21) female inlet threads
•Fine top threads accept all Rain Bird nozzles
Features
•Rugged thermoplastic construction resists UV rays. Dimensions
•Adapts nozzles for use with 1⁄ 2" (15/21) MPT threaded risers. •Height: 51⁄ 4" (13,3 cm)
•Patented PRS pressure regulator built into the stem.
No parts to be installed at the site. Saves time and money. Model
•Maintains constant outlet pressure at 30 psi (2,1 bars). •PA-8S-PRS
Ensures maximum spray head and nozzle performance.
•Ends misting and fogging caused by high pressure. Prevents
water waste and minimizes liability.
•Restricts water loss by up to 70% if nozzle is removed or
damaged. Saves water and money. Reduces liability.
Recommended for vandal-prone areas.
•Fits all Rain Bird plastic nozzles.
•Five-year trade warranty.
PA-8S-PRS
Operating Range
•Pressure: 15 to 70 psi (1,0 to 4,8 bars)
•Flow: 0.2 to 4.0 GPM (0,05 to 0,91 m3/h; 0,01 to 0,25 l/s)
1300A-F
1800®-EXT PA-80
Plastic Extension Plastic Adapter
Features Features
•UV-resistant thermoplastic construction for long life. •Adapts Rain Bird sprinklers for use with any 1⁄2" (15/21) FPT bubbler
•Fits all Rain Bird spray heads and nozzles. Exception: Cannot be used or spray nozzle.
with bubblers. •Rugged, UV-resistant thermoplastic construction.
•Easily installed without any tools. •Easy to install; no tools required.
•Can be reinstalled without damaging the threads if accidentally
knocked off the riser or spray head. Dimensions
•Maximum recommended number: •Height: 11⁄ 2" (3,8 cm); 0.8" (2,0 cm) above 1800 cap
two extensions per sprinkler.
Model
Model •PA-80
•1800-EXT
1800-EXT PA-80
Spray Heads
www.rainbird.com 43
Spray Heads
Spray Head Accessories
RWS Series
Root Watering Systems
Features
•Aesthetically pleasing because it's installed below grade.
•Assured reliability because all units are self-contained and factory
assembled.
•Design flexibility because a variety of models are available to
accommodate your installation requirements.
•For the RWS Model:
•4" retaining cap and locking grate tops a 36" semi-rigid
mesh tube.
•Factory installed swing assemblies (excluding RWS-BGX) with
a 1401 (0.25 GPM) or 1402 (0.5 GPM) bubbler on a fixed riser
(standard on models with a “B” in their model number) makes
connecting to lateral lines easy.
•The locking grate protects the system, and the optional sand sock
is ideal for use in sandy soil.
•For the new Mini Root Watering System:
•4" retaining cap and locking grate tops a 18" semi-rigid
RWS-BG NEW mesh tube.
•Factory installed 1⁄ 2" spiral barb elbow with a 1401 or 1402 bubbler
RWS-M-BG (standard on models with a “B” in their model number) makes
connecting to lateral lines easy.
NEW •Innovative design with a locking grate protects system from
RWS-S-BG vandalism and the optional sand sock is ideal for use in sandy soil.
•For the new Shrub Root Watering System:
•2" snap-on cap and base cap enclose a 10" semi-rigid mesh tube.
•Factory installed 1⁄ 2" spiral barb elbow with 1401 bubbler
(standard on models with a “B” in their model number) makes
How To Specify connecting to lateral lines easy.
RWS - x - x - x - G •It's just the right size for shrubs.
Top
Grate or Snap-
Specifications
on Cap (Shrub)
•Root Watering System: 4" diameter x 36" length.
Optional
C: Check Valve •Mini Root Watering System: 4" diameter x 18" length.
Optional
B: Bubbler •Shrub Root Watering System: 2" diameter x 10" length.
Optional
M: Mini-RWS (4" x 18")
S: Shrub RWS (2" x 10")
Model
RWS Root Watering System
Spray Heads
44 www.rainbird.com
Spray Heads
Spray Head Accessories
Models
•RWS-G: 36" long, 4" diameter with locking grate comes ready for
customer-provided irrigation hardware.
•RWS-BG: RWS-G with factory installed 1401 bubbler, internal
plumbing, 12" swing assembly and 1⁄ 2" (15/21) M NPT inlet
•RWS-BG02: RWS-G with factory installed 1402 bubbler, internal
plumbing, 12" swing assembly and 1⁄ 2" (15/21) M NPT inlet
•RWS-BCG: RWS-G with factory installed 1401 bubbler, check valve,
internal plumbing, 12" swing assembly and 1⁄ 2" (15/21) M NPT inlet
•RWS-BCG02: RWS-G with factory installed 1402 bubbler, check valve, Top view: RWS and Mini-RWS
internal plumbing, 12" swing assembly and 1⁄ 2" (15/21) M NPT inlet with optional bubbler
•RWS-BGX: RWS-G with factory installed 1401 bubbler, internal
plumbing, and 18" swing pipe
•RWS-SOCK: Full length sand sock made from polypropylene
landscape fabric, for use in sandy soil conditions
(RWS and Mini-RWS)
NEW •RWS-M-G: 18" long, 4" diameter with locking grate comes ready for RWS Sand Sock
customer-provided irrigation hardware Designed to fit over the RWS
NEW •RWS-M-BG: RWS-M-G with factory-installed 1401 bubbler and Mini-RWS units. Ideal for
use in sandy soil, it will deter
& 1⁄ 2" spiral barb elbow fine soil from infiltrating into
NEW •RWS-M-BG02: RWS-M-G with factory-installed 1402 bubbler the RWS canister.
& 1⁄ 2" spiral barb elbow
NEW •RWS-M-BCG: RWS-M-G with factory-installed 1401 bubbler, check
valve & 1⁄ 2" spiral barb elbow Position units evenly spaced
around root ball. Install
product with top even with
ground surface.
RWS Shrub-RWS
Mini-RWS
Spray Heads
www.rainbird.com 45
Spray Heads
Spray Head Accessories
ST Series
Saddle Tees
Features
•Patented seal design.
•PVC body and high-strength nylon bolts and nuts which won't
corrode like metal saddles or clamps.
•Less digging and less time required than a double-clamped insert tee.
•Convenient installation tools.
Specifications
•Operating pressure up to 80 psi (5,5 bars)
•PVC body and high strength nylon bolts and nuts.
Models
•ST-75C: 3⁄4" x 1⁄ 2" (1,9 cm x 15/21) female NPT saddle tee
•ST-75D: 3⁄4" x 3⁄4" (1,9 cm x 20/27) female NPT saddle tee
•ST-100C: 1" x 1⁄ 2" (2,5 cm x 15/21) female NPT saddle tee
•ST-100D: 1" x 3⁄4" (2,5 cm x 20/27) female NPT saddle tee
•ND-375: Nut Driving Tool
•HC-45: 1⁄ 2" (1,3 cm) Hole Coring Tool
•HC-55: 3⁄4" (1,9 cm) Hole Coring Tool
ST Series
Spray Heads
46 www.rainbird.com
Spray Heads
Spray Head Accessories
1800 VPC
1800 NP Cover
Locking Screw on 1800 VPC
US NP Cover NozBox
Features Features
•Purple cover for easy identification of non-potable water system. •Made of durable lightweight plastic.
•Threads onto all Uni-Spray™ spray head bodies. •2 separate compartments.
•UV resistant. •Top section holds small items.
•Large toolbox area.
Model •Lower compartment contains 3 trays with slotted, adjustable
•US-NP sections.
Specifications
•15 3⁄ 8" L x 10 3⁄ 8" W x 15 7⁄ 8" H.
Models
•NozBox
NozBox
US NP Cover
Spray Heads
www.rainbird.com 47
Spray Heads
Spray Head Accessories
NozBox Series PT
Spray Head Pull Up Tool
Features
•Clear re-usable tray. Features
•Two securing latches. •Pulls up pop-up sprinklers with or without a nozzle.
•5 distinct compartments. •Pulls up sprinklers in a canister.
•Fits inside the Rain Bird NozBox. •Holds up pop-up sprinklers for maintenance.
•NozBox-AK includes 100 #10 phillips slotted screws, 100 #10-12 •Corrosion resistant.
wall anchors, and a 1⁄4" carbide masonry drill bit.
Model
•NozBox-ZAK includes 50 self-drilling anchors, 50 #8 x 11⁄4"
pan-head screws, 1 Phillips insert bit. •PT
Models
•NozBox-ZAK
•NozBox-AK
PT
NozBox-AK
Spray Heads
48 www.rainbird.com
Spray Heads
Rotary Nozzles
Rotary Nozzles
Rotors
Impacts
Valves
Controllers
Rotary Nozzles are designed to fit Rain Bird® spray heads, but they work like a rotor. What
sets this nozzle apart from standard spray head nozzles, is a low precipitation rate of 0.60
in/hr. Rotary Nozzles also have excellent uniformity of coverage and allow MPR irrigation Commercial
Pump Stations
designs. Take a few moments to turn the page and learn all about how this low flow rate,
in tandem with multiple, rotating streams, will efficiently and reliably work to your
®
Install Rain Bird Rotary Nozzles.
Accessories
Resources
& Training
Reference
Rotary Nozzles
How To Specify
1804-SAM-R13-18Q
Pattern
F=Full
TQ=Three-quarter
Nozzle TT=Two-thirds
Rotary H=Half
Nozzle T=Third
Q=Quarter
Optional
Feature Radius Range
Model 13'-18' (4,0-5,5 m)
1804 SAM
17'-24' (5,2-7,3 m)
Note: Specify sprinkler bodies and nozzles separately.
Installation on Rain Bird 1800®- SAM Spray Heads
recommended in sandy environments.
R17-24Q R13-18H
Rotary Nozzles
50 www.rainbird.com
Rotary Nozzles
Rotary Nozzles
www.rainbird.com 51
Rotary Nozzles
Rotary Nozzles
52 www.rainbird.com
Spray Heads
Rotary Nozzles
Rotors
Rotors
Impacts
Valves
Controllers
Ask anybody who has switched from another rotor to Rain Bird. What you will hear is that
Rain Bird® rotors simplify installation and reliably perform as promised year after year,
and that Rain Bird rotors distribute water more efficiently than anything else out there, Commercial
Pump Stations
thanks to Rain Curtain Nozzle™ Technology. Take time to compare-and if you haven't
Landscape Drip/
Install Confidence. ®
Xerigation
®
Install Rain Bird Rotors.
Accessories
Resources
& Training
Reference
Rotors
10
Rotors
54 www.rainbird.com
Rotors
2045A MAXI-PAW ®
22 to 45' (6,7 to 13,7 m)
10
Rotors
www.rainbird.com 55
Rotors
Primary Applications
Turfgrass 15' to 30' •
Turfgrass 30' to 50' • • • • • • •
Turfgrass more than 50' • • • • • •
Slopes • • • • • • • • •
Ground Cover/Shrubs • • •
Athletic Fields • • • • • • • •
High Wind Areas • • • • • • • • • •
Non-potable Water • • • • • • • • • •
Rotors
56 www.rainbird.com
Rotors
FACT REPORT
Install Confidence.
Install Rain Bird®
Rain Curtain™ Technology.
Rain Curtain technology is only available on Rain Bird rotors, including the
3500 Series, 5000 Series, 5500 Series, Falcon® 6504, 7005, 8005 and 115-E.
Installsuperior
Install superiorwater
waterdistribution
distributionfor
forgreen
greengrass
grassresults.
results.
Only Rain Bird® rotors have Rain Curtain™ nozzle technology that How is Nozzle Performance Measured?
features larger water droplets for resistance to windy conditions,
effective close-in watering to eliminate dry spots near the rotor Scheduling Coefficient (SC) is one of the most accurate
and even distribution over the entire radius range. In side-by-side ways to measure water distribution.
comparisons with the competition, the clear advantages of Rain SC measures how much longer you must water the entire
Curtain technology can be seen with the naked eye. area for the driest sections to receive sufficient water.
The lower the SC, the better the rotor distributes water.
Rain Curtain Technology An SC of 1.0 represents perfect uniformity. Tests show
that even rain has an SC greater than 1.0.**
Test results from side-by-side comparisons with
competitive nozzle products prove that Rain Curtain
technology consistently outperforms the competition
with the lowest scheduling coefficients—as low as 1.1.*
*Based on tests conducted at Rain Bird’s Product Research Center in Glendora, CA.
Test results reflect a comparison of Rain Bird’s products with those
of its principal competitors.**Based on a report published by
The Center for Irrigation Technology.
The Competition
Rotors
www.rainbird.com 57
Rotors
Installproven
Install provenRain
RainCurtain
Curtain™™technology
technology
There are three elements which create the superior coverage
of Rain Curtain nozzle technology. Short to Mid-Range Rain Curtain™ Nozzle Technology
[15-50 ft. (4,6-15,2 m)]
1
Large Droplets for Consistent Performance
Patent-Pending Micro-Ramps™ draw water off the main
stream, and gently divert it downward around the head
for superior close-in watering without seed washout.
2
Effective Close-in Watering 1) Create a cohesive stream for maximum distance of throw.
2) Generate larger droplets that are less susceptible to wind and
airborne evaporation.
3) Deliver even water distribution across the entire radius range
for superior green grass results.
Long-range
Effective and gentle close-in watering eliminates dry spots around Watering Port
the rotor without seed washout.
Close-in
Watering Port
Mid-range
3
Even Distribution Over the Entire Radius Watering Port
Call 1-800-RainBird (U.S. only) or visit www.rainbird.com for the name of your Rain Bird Distributor.
Rotors
58 www.rainbird.com
Rotors
FAC T R E P O RT
Install Confidence. ™
Installthe
Install thereliability
reliabilitythat
thattakes
takesperformance
performanceto
to the
the top.
top.
(15,2 m), trust that this rotor is more reliable than the competition,
Rain Curtain™ nozzle trees, including eight nozzles Five-year trade warranty reinforces Rain Bird’s
(angle of trajectory 25˚) and four low angle nozzles commitment to product integrity and assures customer
(angle of trajectory 10˚), provide 25 to 50 feet (7,6 to peace of mind.
15,2 m) distance of throw.
Reversing full- and part-circle operation (up to 360˚)
Pressure-activated, multi-function wiper seal protects in one unit.
internals from debris and assures positive pop-up
Field-proven UV-resistant plastic and stainless steel
and retraction.
parts construction ensures long product life.
Reinforced flow path for additional side load strength.
Rotors
www.rainbird.com 59
Rotors
Installthe
Install theproof.
proof. R a i n C u r t a i n™
Rain Bird® and competitive rotors are routinely subjected to the most
No z z l e Te c h n o l o g y. . .
stringent testing procedures in the industry. Test results from these Only Rain Bird rotors have Rain Curtain
side-by-side comparisons prove that Rain Bird 5000 Series Rotors Nozzle Technology that features:
consistently outperform the competition.*
larger water droplets for resistance to
3.8 Times More Reliable windy conditions
R obust...
1.7 Times More Robust
GRIT CYCLE TEST Rain Bird 5000 Series Rotor Hunter PGP
with Rain Curtain Technology
Grit Cycle Test results prove that 400
Rain Bird 5000 Series Rotors last 1.7 Note: Rotors tested at consistent psi with no physical disruption of the stream.
300
times longer than the competition.
As the following graph shows, the Consider installing Rain Bird 5000 Series
TIME
200
Rain Bird 5000 Series Rotor average Rotors with water-saving MPR nozzles.
time to failure is 345 hours. The 100
Rotors
60 www.rainbird.com
Rotors
3500 Series
Easy to Use, Tough to Beat
True 4" (10,2 cm) pop-up (measured from the cover to the nozzle).
Features
•The 3500 Series Rotor is available in Shrub, 4" and SAM™ models.
•Top-adjust arc adjustment requiring only a flat bladed screwdriver.
•Attached nozzle tree of six Rain Curtain™ Nozzles provides:
• Large droplets for consistent performance.
• Effective close-in watering.
• Even distribution over the entire radius.
•Water-lubricated gear-drive design for durable, reliable operation.
•40- 360° Part-circle arc rotation and reversing full-circle rotation
in one.
•Radius adjustment screw allows up to 25% radius reduction without
changing nozzles.
•Quick Check Arc/Fast Forward.
•Dual action, positive stop wiper seal protects internals from debris
and assures positive pop-up and retraction.
•Self-adjusting stator does not require replacement when changing
nozzles.
•Easily removable filter screen.
•Nozzle removal feature.
Options 3504-PC
•Optional non-potable cover for easy identification of reclaimed water.
•Optional Seal-A-Matic™ (SAM™)check valve holds up to 7 feet (2,1 m)
of elevation change, to prevent puddling and erosion caused by low
head drainage.
Operating Range
•Precipitation rate: .37 to .83 inches per hour (9 to 22 mm/h)
•Radius: 15 to 35 feet (4,6 to 10,7 m)
How To Specify
•Radius may be reduced up to 25% with Radius Reduction Screw
•Pressure: 25-55 psi (1,7 to 3,8 bars) 3504 - S - PC - SAM - NP
•Flow Rate: .54 to 4.6 GPM (0,12 to 1,04 m3/h) Options
S = SAM;
NP = Non-potable
Specifications cover
Rotation
• 1⁄ 2" NPT female bottom threaded inlet Part-circle
Model
•Full- and Part-circle adjustment 40° - 360° Shrub
3500-S Model
3500 Series 4" pop-up
Rotors
www.rainbird.com 61
Rotors
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
62 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 63
Rotors
Features
•The 5000 Plus Series Rotor is available in 4", 6", 12", Shrub, and
Stainless Steel models (5000 Plus 4" & 6" only).
•Standard rubber cover for extra protection. 5000 Plus features a green
cover while the 5000 features a black cover.
•Heavy-duty cover assembly for extra durability in residential or
commercial applications.
•Rain Curtain™ Nozzles.
•The 5000 Plus features a Flow Shut-Off device to stop the flow of
water to a particular head while the system is still in operation.
•Slip clutch mechanism for quick adjustment.
•Heavy-duty retract spring assures positive pop-down.
•Tree of nozzles including four low angle (Angle of Trajectory 10°) and
eight standard angle Rain Curtain™ Nozzles (Angle of Trajectory 25°)
provides 25 to 50 (7,6 to 15,2 m) distance of throw.
•Award-winning MPR nozzle set simplifies design and installation by
providing matched precipitation from 25' to 35' (7,6 to 10,7 m) (see
page 69).
•Top-adjust arc adjustment requiring only a flat-blade screwdriver.
•Five-year trade warranty.
•40 - 360° Arc Rotation and reversing full circle rotation in one. (A non-
reversing full circle only unit is also available).
•Radius adjustment screw allows up to 25% radius reduction without
changing nozzles.
•True 4" (10 cm) pop-up (measured from the cover to the nozzle).
•Pressure-activated multi-function wiper seal protects internals from
5012-PL-FC, 5006-PL-FC, debris and assures positive pop-up and retraction.
5004-PL-FC, 5000-S-PL-FC •Reinforced flow path for additional side load strength.
•Additional O-rings and seals for extra protection in “gritty” water.
•Optional stainless steel riser helps deter vandalism on public turf
How To Specify areas (4" and 6" 5000 Plus only).
5004-S-PL-PC-SAM-NP-SS •Optional pre-installed Rain Curtain™ nozzle.
•Optional Seal-A-Matic (SAM)™ check valve holds up to 7 feet (2,1 m)
Options of elevation change, to prevent puddling and erosion caused by low
SAM;
Non-potable cover head drainage.
Rotation •Optional non-potable purple cover for easy identification of
“PC” for 40-360 degrees
“FC” for 360 degree only reclaimed water.
Model
Plus
Model
Model Stainless steel
Shrub
Model
5000 Series 4" pop-up
Rotors
64 www.rainbird.com
Rotors
5004-UPG
How To Specify
UPG - PL - PC - S
Options
SAM
Rotation
“PC” for 40-360
degrees
Plus Model
with cone valve for
flow shut-off
Model
5004
UPG Rotor
Rotors
www.rainbird.com 65
Rotors
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
66 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 67
Rotors
5000/5000 Plus Low Angle Nozzle Performance 5000/5000 Plus Low Angle Nozzle Performance METRIC
Pressure Nozzle Radius Flow Precip Precip Pressure Nozzle Radius Flow Flow Precip Precip
psi ft. GPM In/h In/h bars m m3⁄h l/s mm/h mm/h
25 1.0 LA 25 0.76 0.23 0.27 1,7 1,0 LA 7,60 0,17 0,05 6 7
1.5 LA 27 1.15 0.30 0.35 1,5 LA 8,20 0,26 0,07 8 9
2.0 LA 29 1.47 0.34 0.39 2,0 LA 8,80 0,33 0,09 9 10
3.0 LA 29 2.23 0.51 0.59 3,0 LA 8,80 0,51 0,14 13 15
35 1.0 LA 28 0.92 0.23 0.26 2,0 1,0 LA 8,00 0,18 0,05 6 6
1.5 LA 30 1.38 0.30 0.34 1,5 LA 8,60 0,28 0,08 8 9
2.0 LA 31 1.77 0.35 0.41 2,0 LA 9,10 0,36 0,10 9 10
3.0 LA 33 2.68 0.47 0.55 3,0 LA 9,30 0,55 0,15 13 15
45 1.0 LA 29 1.05 0.24 0.28 2,5 1,0 LA 8,60 0,20 0,06 5 6
1.5 LA 31 1.58 0.32 0.37 1,5 LA 9,20 0,32 0,09 8 9
2.0 LA 32 2.02 0.38 0.44 2,0 LA 9,50 0,41 0,11 9 10
3.0 LA 35 3.07 0.48 0.56 3,0 LA 10,10 0,62 0,17 12 14
55 1.0 LA 29 1.17 0.27 0.31 3,0 1,0 LA 8,80 0,22 0,06 6 7
1.5 LA 31 1.76 0.35 0.41 1,5 LA 9,40 0,35 0,10 8 9
2.0 LA 33 2.24 0.40 0.46 2,0 LA 9,70 0,45 0,13 10 11
3.0 LA 36 3.41 0.51 0.58 3,0 LA 10,60 0,68 0,19 12 14
65 1.0 LA 29 1.27 0.29 0.34 3,5 1,0 LA 8,80 0,24 0,07 6 7
1.5 LA 31 1.92 0.38 0.44 1,5 LA 9,40 0,38 0,11 9 10
2.0 LA 33 2.45 0.43 0.50 2,0 LA 9,90 0,49 0,14 10 11
3.0 LA 36 3.72 0.55 0.64 3,0 LA 10,80 0,74 0,21 13 15
Precipitation Rates based on half-circle operation. 4,0 1,0 LA 8,80 0,26 0,07 7 8
Square spacing based on 50% diameter of throw. 1,5 LA 9,40 0,41 0,11 9 11
Triangular spacing based on 50% diameter of throw. 2,0 LA 10,10 0,52 0,15 10 12
Performance data collected in zero wind conditions. 3,0 LA 11,00 0,80 0,22 13 15
4,5 1,0 LA 8,80 0,27 0,08 7 8
1,5 LA 9,40 0,44 0,12 10 11
2,0 LA 10,10 0,56 0,15 11 13
3,0 LA 11,00 0,84 0,23 14 16
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
68 www.rainbird.com
Rotors
Precipitation rate of 0.60 in/hr (15,2 mm/hr) within and between 5000/5000 Plus MPR Nozzles
nozzle sets.
Features
•Three Nozzle trees of 25', 30', and 35' (7,6 m, 9,1 m, 10,7 m) radii.
•Each tree contains a Q (90°), T (120°), H (180°), and F (360°) Nozzle.
•No fixed arc plate required.
•Compatible with both the 5000 and 5000 Plus Rotor Series.
•Rain Curtain™ Technology provides:
- Large droplets for consistent performance.
- Effective close-in watering.
- Even distribution over the entire radius.
•Precipitation rate of 0.60 in/hr (15,2 mm/hr) reduces run-off
and erosion.
•Nozzles are easy to insert and remove.
•Stackable nozzle trees for convenient storage.
Models
•5000-MPR-25: Tree of nozzles for 25-foot radius
with Q, T, H, F Nozzles attached
•5000-MPR-30: Tree of nozzles for 30-foot radius
with Q, T, H, F Nozzles attached
•5000-MPR-35: Tree of nozzles for 35-foot radius
with Q, T, H, F Nozzles attached
How To Specify
5000 - MPR - 25 - Q
Pattern
Q=Quarter
T=Third
H=Half
F=Full
Model Radius Range
Rotor 25'
30'
Nozzle 35'
Matched
Precipitation
Rate
Rotors
www.rainbird.com 69
Rotors
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
70 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 71
Rotors
R-50
Full- or Part-Circle Rotor Pop-Up Sprinkler
Features
•Five-year trade warranty.
•Water-lubricated, non-strippable drive provides durability for a longer
product life.
•25° to 350° part-circle operation or non-reversing full-circle operation
in one unit.
•5 Radius+ nozzles provide for maximum radius.
•Radius adjustment screw allows up to 25% radius reduction without
changing nozzles.
•Unique Quick Flush™ action cleans stem on initial pop-up and final
retraction.
•Adjustable bypass allows flow adjustment to optimize drive at varying
pressure.
•Inlet filter screen and dual spring bearings ensure dirty water
performance.
•Low angle (11°) body available.
•Low-pressure and low-gallonage operation.
•35⁄ 8" (9,2 cm) pop-up height.
•Patented, pressure-activated, multi-function wiper seal protects
internal assembly from debris to ensure positive pop-up and
retraction.
Options
•Optional internal Seal-A-Matic™ (SAM) holds back 8 feet of elevation
change to prevent puddling and erosion caused by low head drainage.
•Optional, durable, two-piece rubber cover for added safety sold
separately (standard on SAM models).
R-50 •Vandal-resistant, stainless steel locking set screw at cap threads on
SAM models.
How To Specify •Optional, non-potable water cap for easy identification of reclaimed
water sold separately.
R-50 SAM- RC - LA - 2.0
Nozzle
Size
2.0
Model
R-50 SAM
Optional Feature
Low Angle Body
Optional Feature
Rubber Cover
Rotors
72 www.rainbird.com
Rotors
Rain Curtain Nozzles provide superior Radius+ Nozzles provide the longest radius
coverage, especially close-in. possible with good distribution efficiency.
Rotors
www.rainbird.com 73
Rotors
35
•• 6.01.5 36
28
5.4
1.9
0.80
0.47
0.93
0.54 2,0
•• 6,01,5 11,0
8,4
1,23
0,39
0,34
0,11
20
11
23
13
•• 2.03.0 30
33
2.2
3.3
0.47
0.58
0.54
0.67
•• 2,03,0 8,8
9,9
0,46
0,68
0,13
0,19
12
14
14
16
•• 4.06.0 34
38
4.4
6.5
0.73
0.87
0.85
1.00
•• 4,06,0 10,2
11,3
0,92
1,33
0,25
0,37
18
21
20
24
45
•• 1.52.0 28
30
2.2
2.6
0.54
0.56
0.62
0.64
2,5
•• 1,52,0 8,4
8,9
0,44
0,52
0,12
0,14
12
13
14
15
•• 3.04.0 34
34
3.8
5.1
0.63
0.85
0.73
0.98
•• 3,04,0 10,1
10,3
0,76
1,02
0,21
0,28
15
19
17
22
55
•• 6.01.5 40
28
7.3
2.4
0.88
0.59
1.01
0.68 3,0
•• 6,01,5 11,6
8,5
1,47
0,48
0,41
0,13
22
13
25
15
•• 2.03.0 30
34
2.9
4.1
0.62
0.68
0.72
0.79
•• 2,03,0 9,1
10,2
0,57
0,83
0,16
0,23
14
16
16
18
•• 4.06.0 34
40
5.7
8.1
0.95
0.98
1.10
1.13
•• 4,06,0 10,3
11,9
1,13
1,62
0,31
0,45
21
23
25
26
60
•• 1.52.0 28
30
2.5
3.0
0.61
0.64
0.71
0.74
3,5
•• 1,52,0 8,5
9,2
0,53
0,63
0,15
0,18
15
15
17
17
•• 3.04.0 34
34
4.3
6.1
0.72
1.02
0.83
1.17
•• 3,04,0 10,4
10,4
0,90
1,24
0,25
0,34
17
23
19
27
• 6.0 40
Precipitation Rates based on half-circle operation.
8.5 1.02 1.18
4,0
•• 6,01,5 12,2
8,5
1,76
0,56
0,49
0,16
24
15
27
18
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
•• 2,03,0 9,2
10,4
0,67
0,96
0,19
0,27
16
18
18
21
Performance data collected in zero wind conditions.
•• 4,06,0 10,4
12,2
1,35
1,89
0,37
0,53
25
25
29
29
4,1
•• 1,52,0 8,5
9,2
0,57
0,68
0,16
0,19
16
16
18
19
•• 3,04,0 10,4
10,4
0,98
1,38
0,27
0,38
18
26
21
29
• 6,0 12,2 1,93 0,54 26 30
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
74 www.rainbird.com
Rotors
35
•• 6.01.5 -
34
-
1.7
-
0.28
-
0.33 2,0
•• 6,01,5 -
10,2
-
0,36
-
0,10
-
7
-
8
•• 2.03.0 38
39
2.5
3.5
0.33
0.44
0.39
0.51
•• 2,03,0 11,4
11,7
0,53
0,75
0,15
0,21
8
11
9
13
•• 4.06.0 39
45
4.8
7.0
0.61
0.67
0.70
0.77
•• 4,06,0 -
-
-
-
-
-
-
-
-
-
45
•• 1.52.0 34
39
2.0
2.8
0.33
0.35
0.38
0.41
2,5
•• 1,52,0 10,3
11,6
0,40
0,58
0,11
0,16
8
9
9
10
•• 3.04.0 40
40
4.2
5.4
0.51
0.65
0.58
0.75
•• 3,04,0 11,9
11,9
0,83
1,11
0,23
0,31
12
16
14
18
55
•• 6.01.5 48
34
8.1
2.1
0.68
0.35
0.78
0.40 3,0
•• 6,01,5 13,9
10,3
1,63
0,43
0,45
0,12
17
8
19
9
•• 2.03.0 39
40
3.1
4.5
0.39
0.54
0.45
0.63
•• 2,03,0 11,7
12,0
0,63
0,91
0,17
0,25
9
13
11
15
•• 4.06.0 41
49
6.0
8.9
0.69
0.71
0.79
0.82
•• 4,06,0 12,2
14,3
1,21
1,78
0,33
0,49
16
17
19
20
60
•• 1.52.0 34
39
2.3
3.3
0.38
0.42
0.44
0.48
3,5
•• 1,52,0 10,4
11,9
0,47
0,68
0,13
0,19
9
10
10
11
•• 3.04.0 40
41
4.9
6.2
0.59
0.71
0.68
0.82
•• 3,04,0 12,2
12,4
0,99
1,31
0,28
0,36
13
17
15
20
• 6.0 50
Precipitation Rates based on half-circle operation.
9.4 0.72 0.84
4,0
•• 6,01,5 14,8
10,4
1,95
0,50
0,54
0,14
18
9
21
11
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
•• 2,03,0 11,9
12,2
0,73
1,08
0,20
0,30
10
15
12
17
Performance data collected in zero wind conditions.
•• 4,06,0 12,5
15,1
1,39
2,09
0,39
0,58
18
18
21
21
4,1
•• 1,52,0 10,4
11,9
0,52
0,75
0,14
0,21
10
11
11
12
•• 3,04,0 12,2
12,5
1,11
1,41
0,31
0,39
15
18
17
21
• 6,0 15,3 2,13 0,59 18 21
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 75
Rotors
35
•• 6.01.5 30
23
5.1
1.8
1.09
0.66
1.26
0.76 2,0
•• 6,01,5 9,2
6,7
1,16
0,37
0,32
0,10
27
16
32
19
•• 2.03.0 27
29
2.2
3.1
0.58
0.71
0.67
0.82
•• 2,03,0 8,1
8,7
0,46
0,65
0,13
0,18
14
17
16
20
•• 4.06.0 29
32
4.4
6.0
1.01
1.13
1.16
1.30
•• 4,06,0 8,7
9,4
0,92
1,24
0,26
0,34
24
28
28
32
45
•• 1.52.0 23
28
2.0
2.5
0.73
0.61
0.84
0.71
2,5
•• 1,52,0 6,8
8,1
0,41
0,51
0,11
0,14
18
16
20
18
•• 3.04.0 29
30
3.6
5.1
0.82
1.09
0.95
1.26
•• 3,04,0 8,7
8,8
0,72
1,02
0,20
0,28
19
26
22
30
55
•• 6.01.5 33
22
6.9
2.2
1.22
0.88
1.41
1.01 3,0
•• 6,01,5 9,7
6,8
1,38
0,44
0,38
0,12
29
19
34
22
•• 2.03.0 26
29
2.8
3.9
0.80
0.89
0.92
1.03
•• 2,03,0 8,2
8,8
0,56
0,79
0,15
0,22
17
20
19
24
•• 4.06.0 30
35
5.6
7.6
1.20
1.19
1.38
1.38
•• 4,06,0 9,0
10,1
1,12
1,52
0,31
0,42
28
30
32
34
60
•• 1.52.0 22
27
2.3
2.9
0.92
0.77
1.06
0.88
3,5
•• 1,52,0 6,8
8,2
0,48
0,61
0,13
0,17
21
18
24
21
•• 3.04.0 29
30
4.1
5.9
0.94
1.26
1.08
1.46
•• 3,04,0 8,8
9,2
0,86
1,22
0,24
0,34
22
29
25
34
• 6.0 34
Precipitation Rates based on half-circle operation.
7.9 1.32 1.52
4,0
•• 6,01,5 10,4
6,7
1,65
0,52
0,46
0,14
30
23
35
27
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
•• 2,03,0 8,1
8,8
0,65
0,92
0,18
0,25
20
24
23
27
Performance data collected in zero wind conditions.
•• 4,06,0 9,2
10,4
1,31
1,77
0,36
0,49
31
33
36
38
4,1
•• 1,52,0 6,7
8,2
0,52
0,66
0,14
0,18
23
20
27
23
•• 3,04,0 8,8
9,2
0,93
1,34
0,26
0,37
24
32
28
37
• 6,0 10,4 1,79 0,50 33 38
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
76 www.rainbird.com
Rotors
35
•• 6.01.5 34
26
5.4
1.9
0.90
0.54
1.04
0.63 2,0
•• 1,56,0 10,4
7,9
1,23
0,39
0,34
0,11
23
12
26
14
•• 2.03.0 29
30
2.2
3.3
0.50
0.71
0.58
0.82
•• 2,03,0 8,7
8,8
0,46
0,68
0,13
0,19
12
18
14
20
•• 4.06.0 32
34
4.4
6.5
0.83
1.08
0.96
1.25
•• 4,06,0 9,3
10,4
0,92
1,33
0,25
0,37
21
25
25
28
45
•• 1.52.0 26
30
2.2
2.6
0.63
0.56
0.72
0.64
2,5
•• 1,52,0 7,9
8,8
0,44
0,52
0,12
0,14
14
13
16
16
•• 3.04.0 30
30
3.8
5.1
0.81
1.09
0.94
1.26
•• 3,04,0 8,9
9,4
0,76
1,02
0,21
0,28
19
23
22
27
55
•• 6.01.5 36
26
7.3
2.4
1.08
0.68
1.25
0.79 3,0
•• 1,56,0 10,6
7,9
1,47
0,48
0,41
0,13
26
15
30
18
•• 2.03.0 30
30
2.9
4.1
0.62
0.88
0.72
1.01
•• 2,03,0 9,0
9,1
0,57
0,83
0,16
0,23
14
20
16
23
•• 4.06.0 32
36
5.7
8.1
1.07
1.20
1.24
1.39
•• 4,06,0 9,5
10,8
1,13
1,62
0,31
0,45
25
28
29
32
60
•• 1.52.0 26
30
2.5
3.0
0.71
0.64
0.82
0.74
3,5
•• 1,52,0 7,9
9,2
0,53
0,63
0,15
0,18
17
15
20
17
•• 3.04.0 30
32
4.3
6.1
0.92
1.15
1.06
1.32
•• 3,04,0 9,2
9,5
0,90
1,24
0,25
0,34
21
27
25
32
• 6.0 36
Precipitation Rates based on half-circle operation.
8.5 1.26 1.46
4,0
•• 1,56,0 11,0
7,9
1,76
0,56
0,49
0,16
29
18
34
21
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
•• 2,03,0 9,2
9,2
0,67
0,96
0,19
0,27
16
23
18
26
Performance data collected in zero wind conditions.
•• 4,06,0 9,8
11,0
1,35
1,89
0,37
0,53
28
31
33
36
4,1
•• 1,52,0 7,9
9,2
0,57
0,68
0,16
0,19
18
16
21
19
•• 3,04,0 9,2
9,8
0,98
1,38
0,27
0,38
23
29
27
33
• 6,0 11,0 1,93 0,54 32 37
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 77
Rotors
Features
•Eight Rain Curtain™ nozzles for optimal distribution and close-in
watering resulting in superior uniformity.
•Five year trade warranty.
•Memory Arc® returns the rotor to its original arc setting.
•Non-strippable drive mechanism prevents damage from vandals.
•Brass reinforced nozzle turret to riser connection withstands
attempted vandalism.
•Optional stainless steel riser model helps deter vandalism on public
turf areas.
•Continuous full and part circle operation in one unit to reduce
inventory requirements.
•Easy, wet, dry arc adjustment with slotted screwdriver through top of
rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
•Left and right side trips adjustable for ease of installation without
turning the case and loosening the pipe connection.
•Seal-A-Matic™ (SAM) check device/riser to help prevent low head
drainage.
•Water-lubricated gear drive.
•Nozzles are interchangeable from the front with no special tools.
•Self-adjusting stator allows nozzle replacement with no other
adjustments required.
•Heavy duty retract spring ensures positive pop-down.
•Standard black rubber cover.
•Optional Purple rubber cover for non-potable applications.
•Small 13⁄ 4" (4,4 cm) exposed diameter reduces possibility of injury on
play areas.
How To Specify
5505 - SS - NP - 12
Nozzle
Model Size
5500 Series: 12
5" pop-up
Optional Feature
Non-potable
rubber cover
Optional Feature
Stainless steel riser
(5" only)
5505 5512
Rotors
78 www.rainbird.com
Rotors
Operating Range
•Precipitation Rate: 0.23 to 1.4 in/hr (5,9 to 35,5 mm/h)
•Radius: 33 to 55 feet (10,1 to 16,8 m)
•Pressure: 30 to 90 psi (2,1 to 6,2 bars)
•Flow: 1.4 to 15.5 GPM (0,33 to 3,52 m3/h; 0,09 to 0,98 l/s)
Specifications
• 3⁄ 4" (20/27) NPT or BSP female threaded inlet
•SAM check device holds up to 10 feet (3,1 m) of head
•Rain Curtain nozzles: 2.0 - Orange, 3.0 - Red, 4.0 - Black, 5.0 - Yellow,
6.0 - Light Blue, 8.0 - Dark Green, 10.0 - Grey, 12.0 - Beige
•Nozzle outlet trajectory is 22°
Dimensions
•Exposed diameter: 1 3⁄ 4" (4,4 cm)
•Overall diameter: 2 3⁄ 4" (7,0 cm)
•Overall height: 9 1⁄ 4" (23,5 cm)
•Pop-up height: 5" (12,7 cm)
Note: Pop-up height is measured from cover to the primary nozzle port.
Overall body height is measured popped down.
Models
•5505: 3⁄ 4" NPT female threaded inlet (5" plastic riser stem)
•5505-SS: 3⁄ 4" NPT female threaded inlet (5" stainless steel
covered riser stem)
•5512: 3⁄ 4" NPT female threaded inlet (12" plastic riser stem)
Rotors
www.rainbird.com 79
Rotors
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
80 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 81
Rotors
Falcon® 6504
Uncompromising Performance
Features
•Rain Curtain™ nozzles with multiple ports for optimal long-range,
mid-range, and close-in watering resulting in superior uniformity.
•Five-year trade warranty.
•Stainless steel riser option helps deter vandalism on public turf areas.
•Easy arc adjustment (part-circle model) through top of rotor from
40° to 360°.
•Water-lubricated gear drive for reliable, durable rotation.
•Heavy-duty, stainless steel retract spring ensures positive pop-down.
•Standard black rubber cover or optional purple rubber cover for non-
potable water.
•Removable Seal-A-Matic™ (SAM) check device prevents puddling and
erosion caused by low-head drainage.
•Nozzles are interchangeable from the front with no special tools.
•Self-adjusting stator does not require replacement when changing
nozzles.
•Ratcheting slip clutch mechanism speeds installation.
•Radius adjustment screw allows radius reduction up to 25% without
changing nozzles.
•Small 2" (5,1 cm) exposed diameter reduces possibility of injury in
play areas.
•Patented, pressure-activated wiper seal and tapered riser stem
Falcon Falcon on both plastic and stainless steel models protect internals from
6504 6504 debris to ensure positive pop-up and retraction.
Stainless •4" (10,2 cm) pop-up height to center line of nozzle clears taller
Steel turfgrass.
•Stainless steel trip gears ensure long-term durability.
How To Specify •Optional rubber collar for added safety on playing fields.
•Falcon rotors can be ordered from the factory with nozzles
NP
or pre-installed in case quantities as a special order.
F4- PC- SS- HS- 16- P
Optional Optional
Optional Features Feature
Feature Non- Pre-installed
Stainless potable Nozzle
steel riser cover
or,
Rotation High-
Part-circle Nozzle Size
speed
16
Model rotor
F4: Falcon
Note: For non-U.S. applications, it is necessary to
specify NPT or BSP thread type.
Rotors
82 www.rainbird.com
Rotors
Operating Range
•Precipitation Rate: 0.37 to 1.14 inches per hour (9 to 29 mm/h)
•Radius: 39 to 65 feet (11,9 to 19,8 m)
•Pressure: 30 to 90 psi (2,1 to 6,2 bars)
•Flow: 2.9 to 21.7 GPM (0,66 to 4,93 m3⁄h; 0,18 to 1,37 l/s)
Specifications
•1" (26/34) female NPT or BSP threaded inlet
•SAM check device holds up to 10 feet (3,1 m) of elevation change
•Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green;
10-grey; 12-beige; 14-light green; 16-dark brown; 18-dark blue
•Nozzle outlet trajectory is 25°
Dimensions
•Overall height: 81⁄ 2" (21,6 cm)
•Pop-up height: 4" (10,2 cm)
•Exposed surface diameter: 2" (5,1 cm)
Note: Pop-up height is measured from cover to center of nozzle. Overall body
height is measured popped down.
Models
•F4-FC: Full-circle
•F4-PC: Part-circle
•F4-FC-NP: Full-circle, non-potable cover
•F4-PC-NP: Part-circle, non-potable cover
•F4-FC-SS: Full-circle, stainless steel
•F4-PC-SS: Part-circle, stainless steel
•F4-FC-SS-HS: Full-circle, stainless steel, high speed rotation
•F4-PC-SS-HS: Part-circle, stainless steel, high speed rotation
•F4-FC-SS-NP: Full-circle, stainless steel, non-potable cover
•F4-PC-SS-NP: Part-circle, stainless steel, non-potable cover
Note: All models available with BSP threads.
Rotors
www.rainbird.com 83
Rotors
60 •• 46 41
47
4.0
6.0
0.46
0.52
0.53
0.60
•• 810 51
55
8.2
10.0
0.61
0.64
0.70
0.73
•• 1214 57
61
12.2
14.0
0.72
0.72
0.83
0.84
•• 1618 63
63
15.7
17.1
0.76
0.83
0.88
0.96
Precipitation Rates based on half-circle operation.
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
Performance data collected in zero wind conditions.
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
84 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 85
Rotors
60 •• 46 41
45
4.2
6.2
0.48
0.59
0.56
0.68
•• 810 47
49
8.3
10.2
0.72
0.82
0.84
0.94
•• 1214 53
53
12.4
14.2
0.85
0.97
0.98
1.12
•• 1618 55
59
15.7
17.2
1.00
0.95
1.15
1.10
Precipitation Rates based on half-circle operation.
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
Performance data collected in zero wind conditions.
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
86 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 87
Rotors
7005
Bigger, Better, Built to Last
Features
•Rain Curtain™ nozzles with multiple ports for optimal long-range,
mid-range, and close-in watering resulting in superior uniformity.
•Five year trade warranty.
•Memory Arc® returns the rotor to its original arc setting.
•Non-strippable drive mechanism prevents damage from vandals.
•Brass reinforced nozzle turret to riser connection withstands
attempted vandalism.
•Optional stainless steel riser model helps deter vandalism on public
turf areas.
•Easy, wet, dry arc adjustment with slotted screwdriver through top of
rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
•Continuous full- and part-circle operation in one unit to reduce
inventory requirements.
•Left and right side arc settings adjustable for ease of installation
without turning the case and loosening the pipe connection.
•Seal-A-Matic™ (SAM) check device/riser to help prevent low head
drainage.
•Water-lubricated gear drive.
•Standard rubber cap. (Black)
•Nozzles are interchangeable from the front with no special tools.
•Self-adjusting stator allows nozzle replacement with no other
adjustments required.
•Heavy duty retract spring ensures positive pop-down.
•Small (17⁄ 8") exposed diameter reduces possibility of injury in play
7005 7005-SS areas.
•Optional non-potable rubber cover (purple).
•Optional rubber collar (black or purple).
Optional
Feature
Stainless
steel riser
Rotors
88 www.rainbird.com
Rotors
Specifications
7005 Nozzle Performance
•1" (26/34) NPT or BSP female threaded inlet
•SAM check device holds up to 10 feet of head Pressure Nozzle Radius Flow Precip Precip
•Rain Curtain nozzles: 04 - black; 06 - light blue; psi ft. GPM In/h In/h
08 - dark green; 10 - gray; 12 - beige; 14 - light green;
16 - dark brown; 18 - dark blue
50 •• 04
06
39
45
3.8
5.6
0.48
0.53
0.56
0.62
•Nozzle outlet trajectory is 25º •• 08
10
49
53
6.6
9.3
0.53
0.64
0.61
0.74
Dimensions
•Exposed diameter: 1 7⁄ 8" (4,8 cm)
•• 12
14
57
59
11.1
12.6
0.66
0.70
0.76
0.81
•Overall diameter: 3 1⁄ 8" (7,9 cm) •• 16
18
61
63
14.3
16.1
0.74
0.78
0.85
0.90
•Overall height: 10 1⁄ 8" (25,7 cm)
•Pop-up height: 5" (12,7 cm)
60 •• 04
06
39
45
3.8
6.1
0.48
0.58
0.56
0.67
Note: Pop-up height is measured from cover to center of nozzle.
Overall body height is measured popped down.
•• 08
10
49
53
8.4
10.1
0.67
0.69
0.78
0.80
Models •• 12
14
59
61
12.0
14.3
0.66
0.74
0.77
0.85
•7005: 1" NPT female threaded inlet (plastic riser stem).
•7005-SS: 1" NPT female threaded inlet (stainless steel
•• 16
18
65
65
15.9
17.8
0.72
0.81
0.84
0.94
covered riser stem).
•Optional non-potable rubber cover (purple)
70 •• 04
06
39
45
4.7
6.7
0.60
0.64
0.69
0.74
•Optional rubber collar (black or purple) •• 08
10
49
55
9.0
11.1
0.72
0.71
0.83
0.82
*Note: All models available with BSP threads
•• 12
14
59
63
13.2
15.3
0.73
0.74
0.84
0.86
•• 16
18
67
67
17.2
19.3
0.74
0.83
0.85
0.96
80 •• 04
06
39
45
5.0
7.1
0.63
0.68
0.73
0.78
•• 08
10
49
55
9.8
11.8
0.79
0.75
0.91
0.87
•• 12
14
61
63
14.2
16.4
0.73
0.80
0.85
0.92
•• 16
18
67
69
18.6
20.9
0.80
0.85
0.92
0.98
90 •• 14
16
65
69
17.9
20.0
0.82
0.81
0.94
0.93
• 18 71 22.2 0.85 0.98
Precipitation Rates based on half-circle operation.
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
Performance data collected in zero wind conditions.
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 89
Rotors
Rotors
90 www.rainbird.com
Rotors
8005
Bigger, Better, Built to Last
Features
•Rain Curtain™ nozzles with multiple ports for optimal long-range,
mid-range, and close-in watering resulting in superior uniformity.
•Five year trade warranty.
•Memory Arc® returns the rotor to its original arc setting.
•Non-strippable drive mechanism prevents damage from vandals.
•Brass reinforced nozzle turret to riser connection withstands
attempted vandalism.
•Optional stainless steel riser model helps deter vandalism on public
turf areas.
•Easy, wet, dry arc adjustment with slotted screwdriver through top of
rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
•Continuous full- and part-circle operation in one unit to reduce
inventory requirements.
•Left and right side arc settings adjustable for ease of installation
without turning the case and loosening the pipe connection.
•Seal-A-Matic™ (SAM) check device/riser to help prevent low head
drainage.
•Water-lubricated gear drive.
•Standard rubber cap. (Black)
•Nozzles are interchangeable from the front with no special tools.
•Self-adjusting stator allows nozzle replacement with no other
adjustments required.
•Heavy duty retract spring ensures positive pop-down.
•Small (17⁄ 8") exposed diameter reduces possibility of injury in play
areas. 8005-SS 8005
•Optional non-potable rubber cover (purple).
•Optional rubber collar (black or purple).
How To Specify
8005- SS- NP- 26
Nozzle Size
Model 26
8005
Optional Features
Non-potable rubber collar
Optional Feature
Stainless steel riser
Rotors
www.rainbird.com 91
Rotors
8005 (continued)
Operating Range 8005 Nozzle Performance
•Radius: 57 to 81 feet (17,4 to 24,7 m)
•Pressure: 50 to 100 psi (3,5 to 6,9 bars) Pressure Nozzle Radius Flow Precip Precip
•Flow: 11.1 to 36.3 GPM (2,54 to 8,24 m3/h; 0,70 to 2,29 l/s) psi ft. GPM In/h In/h
50 • 1214 57 11.1 0.66 0.76
Specifications • 16 59 12.6 0.70 0.81
•1" (26/34) NPT or BSP female threaded inlet • 18 61 14.3 0.74 0.85
•SAM check device holds up to 10 feet (3,1 m) of head • 20 63 16.1 0.78 0.90
•Rain Curtain nozzles:* 12 - beige; 14 - light green; 16 - dark brown; 18 • 22 65 18.6 0.85 0.98
- dark blue; 20 - red; 22 - yellow; 24 - orange; 26 - white • 24 65 20.7 0.94 1.09
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
92 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 93
Rotors
Features
•Factory installed color-coded Rain Curtain™ nozzles with multiple
ports for optimal long-range, mid-range, and close-in watering
resulting in superior uniformity.
•Water-lubricated, heavy-duty, and replaceable gear drive offers
reliable, durable rotation in an environmentally friendly design.
•Five-year trade warranty.
•Standard rubber cover for added safety on playing surfaces.
•130 psi (9,0 bars) operating pressure rating ensures long life
at high pressure.
•The 115-E part-circle model offers 30° to 360° reversing full-circle
operation. Non-reversing full-circle model is also available.
•Settable stator allows for adjustable rotation time from 1.5 to 4
minutes syringing.
•Diffuser screw allows radius reduction up to 10 percent without
changing nozzles.
•True closed-case design with self-flushing action prevents internal
from sticking up.
•Easy arc adjustment from the top requires no special tools for fast
modifications.
Rotors
94 www.rainbird.com
Rotors
Dimensions
•Body Height: 13.4" (34,0 cm)
•Top Diameter: 8.25" (21,0 cm)
•Pop-up Height: 3.25" (8,3 cm)
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 95
Rotors
115-E PC Performance - Dual Spreader™ Nozzles 115-E PC Performance - Dual Spreader™ Nozzles METRIC
Regulated Nozzle Radius Flow Precip Precip Regulated Nozzle Radius Flow Flow Precip Precip
Pressure - psi ft. GPM In/h In/h Pressure - bar m m3⁄h l/s mm/h mm/h
70 • 48 Blue 85 32.1 0.43 0.49 4,8 • 48 Blue 25,9 7,30 2,02 11 13
• 57 Yellow 87 39.3 0.50 0.58 • 57 Yellow 26,5 8,90 2,48 13 15
• 63 Orange - - - - • 63 Orange - - - - -
• 66 Green - - - - • 66 Green - - - - -
80 • 48 Blue 91 35.7 0.41 0.48 5,0 • 48 Blue 26,4 7,50 2,08 11 12
• 57 Yellow 93 43.0 0.48 0.55 • 57 Yellow 27,0 9,10 2,54 13 14
• 63 Orange 100 48.6 0.47 0.54 • 63 Orange - - - - -
• 66 Green 97 52.5 0.54 0.62 • 66 Green - - - - -
90 • 48 Blue 92 37.6 0.43 0.49 5,5 • 48 Blue 27,7 8,10 2,25 11 12
• 57 Yellow 94 46.2 0.50 0.58 • 57 Yellow 28,3 9,80 2,71 12 14
• 63 Orange 103 51.1 0.46 0.54 • 63 Orange 30,5 11,00 3,07 12 14
• 66 Green 101 57.1 0.54 0.62 • 66 Green 29,6 11,90 3,31 14 16
100 • 48 Blue 96 39.3 0.41 0.47 6,0 • 48 Blue 28,0 8,40 2,34 11 12
• 57 Yellow 98 48.7 0.49 0.56 • 57 Yellow 28,6 10,30 2,85 13 15
• 63 Orange 107 54.5 0.46 0.53 • 63 Orange 31,1 11,40 3,18 12 14
• 66 Green 107 59.4 0.50 0.58 • 66 Green 30,4 12,70 3,52 14 16
110 • 48 Blue 97 42.0 0.43 0.50 6,5 • 48 Blue 28,6 8,70 2,42 11 12
• 57 Yellow 101 52.0 0.49 0.57 • 57 Yellow 29,2 10,70 2,98 13 15
• 63 Orange 109 58.2 0.47 0.54 • 63 Orange 31,9 11,90 3,32 12 14
• 66 Green 108 64.2 0.53 0.61 • 66 Green 31,6 13,20 3,66 13 15
120 • 48 Blue 99 43.8 0.43 0.50 7,0 • 48 Blue 29,3 9,00 2,51 11 12
(Fully Open) • 57 Yellow 105 53.6 0.47 0.54 • 57 Yellow 30,0 11,20 3,10 12 14
• 63 Orange 110 61.9 0.49 0.57 • 63 Orange 32,7 12,50 3,47 12 13
• 66 Green 114 65.3 0.48 0.56 • 66 Green 32,7 13,70 3,79 13 15
Proper operation requires base pressure to be a minimum of 15 psi (1,03 bar) higher 7,5 • 48 Blue 29,5 9,50 2,63 11 13
than regulation pressure. • 57 Yellow 30,7 11,70 3,25 12 14
Precipitation Rates based on half-circle operation.
• 63 Orange 33,1 13,10 3,64 12 14
Square spacing based on 50% diameter of throw.
• 66 Green 32,9 14,40 4,01 13 15
Triangular spacing based on 50% diameter of throw. 8,0 • 48 Blue 29,9 9,80 2,72 11 13
Performance data collected in zero wind conditions.
• 57 Yellow 31,5 12,00 3,34 12 14
• 63 Orange 33,4 13,70 3,81 12 14
• 66 Green 34,0 14,70 4,09 13 15
8,3 • 48 Blue 30,2 9,90 2,76 11 13
•
(Fully Open) 57 Yellow 32,0 12,20 3,38 12 14
• 63 Orange 33,5 14,10 3,90 13 14
• 66 Green 34,7 14,80 4,12 12 14
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
96 www.rainbird.com
Rotors
Options
2045A Maxi-Paw
•Optional internal Seal-A-Matic™ (SAM) prevents puddling and
erosion caused by low head drainage and saves water (hold back
10' (3,1 m) or head).
•New optional non-potable cover for easy identification of
reclaimed water.
Operating Range
•Precipitation Rate: 0.23 to 1.05 inches per hour (5,8 to 26,6 mm/h) How To Specify
•Spacing: 22 to 45 feet (6,7 to 13,7 m) 2045A- SAM-10- LA
•Flow rate: 1.5 to 8.4 GPM (0,01 to 0,52 l/s; 0,36 to 1,86 m3/h)
Optional
•Radius: 22 to 45 feet (6,7 to 13,7 m) Feature
Low Angle
•Pressure: 25 to 60 psi (2,0 to 4,5 bars) Nozzle
Nozzle Size
10
Optional
Feature
Model SAM
2045A
Maxi-Paw
Rotors
www.rainbird.com 97
Rotors
35
•• 1206 39
37
5.5
2.0
0.70
0.28
0.80
0.32 2,5 •• 0607 LA
12,3
11,3
1,32
0,46
0,37
0,13
18
7
20
8
•• 0707 LA 23
37
1.9
2.7
0.69
0.38
0.80
0.44
•• 0708
7,1
11,4
0,44
0,62
0,12
0,17
17
10
20
11
•• 0810 LA 38
29
3.3
4.0
0.44
0.92
0.51
1.06
•• 1010 LA
11,7
8,9
0,76
0,92
0,21
0,26
11
23
13
27
•• 1012 41
42
4.8
6.3
0.55
0.69
0.64
0.79
•• 1206
12,5
12,9
1,11
1,45
0,31
0,40
14
18
16
20
45 •• 0607 LA 38
25
2.3
2.1
0.31
0.65
0.35
0.75
3,0
•• 0707 LA
11,5
7,5
0,51
0,47
0,14
0,13
8
17
9
19
•• 0708 39
40
3.0
3.7
0.38
0.45
0.44
0.51
•• 0810 LA
11,8
12,1
0,67
0,83
0,19
0,23
10
11
11
13
•• 1010 LA 31
42
4.5
5.4
0.90
0.59
1.04
0.68
•• 1012
9,4
12,8
1,01
1,21
0,28
0,34
23
15
27
17
55
•• 1206 44
38
7.1
2.5
0.71
0.33
0.82
0.39 3,5 •• 0607 LA
13,3
11,6
1,59
0,55
0,44
0,15
18
8
21
9
•• 0707 LA 25
41
2.3
3.3
0.71
0.38
0.82
0.44
•• 0708
7,6
12,2
0,50
0,72
0,14
0,20
17
10
20
11
•• 0810 LA 41
32
4.1
5.0
0.47
0.94
0.54
1.09
•• 1010 LA
12,4
9,6
0,89
1,09
0,25
0,30
12
23
13
27
•• 1012 43
45
6.0
7.9
0.62
0.75
0.72
0.87
•• 1206
13,0
13,6
1,30
1,72
0,36
0,48
15
19
18
21
60 •• 0607 LA 38
25
2.6
2.4
0.35
0.74
0.40
0.85
4,0
•• 0707 LA
11,6
7,6
0,58
0,54
0,16
0,15
9
18
10
21
•• 0708 41
42
3.5
4.2
0.40
0.46
0.46
0.53
•• 0810 LA
12,5
12,7
0,78
0,94
0,22
0,26
10
12
11
14
•• 1010 LA 32
44
5.4
6.4
1.02
0.64
1.17
0.74
•• 1012
9,8
13,3
1,19
1,42
0,33
0,39
25
16
29
19
• 12 45 8.4 0.80 0.92 13,7 1,86 0,52 20 23
Precipitation Rates based on half-circle operation.
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
Performance data collected in zero wind conditions.
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
98 www.rainbird.com
Rotors
27/37/47 Series
Dirty water applications – Large turf areas with spacing up to
63 feet (19,2 m).
Features 47AP
Operating Range
•Precipitation Rate: 0.45 to 1.32 inches per hour (11 to 34 mm/h)
•Radius: 41 to 63 feet (12,5 to 19,2 m)
•Pressure: 40 to 100 psi (2,8 to 6,9 bars)
Specifications
•1" (26/34) female-threaded inlet
•1" (26/34) female BSP threaded inlet (47AP, 47AP-RC, 47A-SAM,
and 47A-SAM-RC models only)
•27AP: For standard nozzle at 60 psi (4,1 bars), the highest point of
stream is 10 feet (3,1 m) above nozzle. Nozzle outlet trajectory is 25°.
•37AP: For standard nozzle at 60 psi (4,1 bars), the highest point How To Specify
of stream is 10 feet, 6 inches (3,2 m) above nozzle. Nozzle outlet
trajectory is 25°. 47AP - SAM - 14
•47A-SAM, 47AP: For standard nozzle at 70 psi (5,0 bars),
the highest point of stream is 12 feet (3,7 m) above nozzle. Nozzle Size
14
Nozzle outlet trajectory is 23°.
Optional Feature
SAM: Stop-amatic
check valve
Model
47AP
www.rainbird.com 99
Rotors
Rotors
100 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 101
Rotors
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
102 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 103
Rotors
21/31/41-51 Series •21AP: For standard nozzle at 60 psi (4,1 bars), the highest point of
Dirty water applications – Large turf areas with spacing up to stream is 10 feet (3,1 m) above nozzle. Nozzle outlet trajectory is 25°.
83 feet (25,3 m). •31AP: For standard nozzle at 60 psi (4,1 bars), the highest point of
stream is 10 feet, 6 inches (3,2 m) above nozzle. Nozzle outlet
trajectory is 25°.
Flexibility – Straight-through flow for excellent performance in
dirty water. •41-51A-SAM: For standard nozzle at 70 psi (5 bars), the highest point
of stream is 17 feet (5,2 m) above nozzle. Nozzle outlet trajectory is 23°.
Reliability – Proven impact drive.
Dimensions (with standard cover)
Durability – Heavy-duty, brass pop-up assembly.
•21AP/31AP/41-51AP overall height: 10" (25,4 cm)
•41-51A-SAM overall height: 12 7⁄8" (32,7 cm)
Features
•21AP/31AP/41-51AP/41-51A-SAM pop-up height: 2 5⁄16" (5,9 cm)
•Inlet filter screen and flushing action protect internal assembly
•21AP/31AP/41-51AP exposed surface diameter: 6" (15,2 cm)
from debris.
•41-51A-SAM exposed surface diameter: 6 1⁄4" (15,9 cm)
•Long-wearing TNT bearing.
Note: Overall body height is measured popped down.
•Easy to rebuild and repair.
•Color-coded plastic range nozzles on 41-51AP, and 41-51A-SAM. Dimensions (with rubber cover)
•Diffuser screw on 21AP and 31AP allows up to 25% radius •21AP/31AP/41-51AP overall height: 10 1⁄2" (26,7 cm)
reduction without changing nozzles. •41-51A-SAM overall height: 13 1⁄4" (33,7 cm)
•Double-slotted spreader nozzle on 41-51A and 41-51AP for •21AP/31AP/41-51AP/41-51A-SAM pop-up height: 2 5⁄16" (5,9 cm)
optimal mid-range and close-in watering.
•21AP/31AP/41-51AP exposed surface diameter: 6 1⁄2" (16,5 cm)
•Optional, two-piece rubber cover on all models for added safety.
•41-51A-SAM exposed surface diameter: 6 3⁄4" (17,1 cm)
•Optional, internal Stopamatic® valve on 41-51A eliminates puddling Note: Overall body height is measured popped down.
and erosion caused by low-head drainage, saving water and money.
Models
Operating Range •21AP
•Precipitation Rate: 0.16 to 0.74 inches per hour (4 to 19 mm/h) •31AP
•Radius: 41 to 83 feet (12,5 to 25,3 m) •41-51AP
•Pressure: 40 to 100 psi (2,8 to 6,9 bars) •41-51AP-BSP: BSP threaded
•21AP-RC: Rubber cover
Specifications
•31AP-RC: Rubber cover
•1" (26/34) female-threaded inlet
•41-51AP-RC: Rubber cover
•1" (26/34) female BSP threaded inlet (41-51AP and 41-51A-SAM
•41-51AP-RC-BSP: Rubber cover, BSP threaded
models only)
•41-51A-SAM
•41-51AP: For standard nozzle at 70 psi (5 bars), the highest point of
stream is 12 feet (3,7 m) above nozzle. Nozzle outlet trajectory is 23°. •41-51A-SAM-BSP: BSP threaded
•41-51A-SAM-RC: Rubber cover
•41-51A-SAM-RC-BSP: Rubber cover, BSP threaded
How To Specify
41-51AP-SAM- 18x11.5
Nozzle Size
18x11.5
Optional Feature
SAM: Stopamatic
Check Valve
Model
41-51AP
104 www.rainbird.com
Rotors
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 105
Rotors
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
106 www.rainbird.com
Rotors
60
•• 11 x 1311
24 x 72
54
33.3
13.5
0.62
0.45
0.71
0.51 90
•• 11 x 1311
24 x 79
59
41.5
16.4
0.64
0.45
0.74
0.52
•• 1213 xx 1111 55
57
14.6
15.8
0.46
0.47
0.54
0.54
•• 1213 xx 1111 60
62
17.6
19.1
0.47
0.48
0.54
0.55
14 x 11 * 59 18.0 0.50 0.58 14 x 11 * 65 21.8 0.50 0.57
•• 1618 xx 1111.5 62
65
20.7
23.7
0.52
0.54
0.60
0.62
•• 1618 xx 1111.5 68
71
25.0
28.7
0.52
0.55
0.60
0.63
•• 2022 xx 11.513
68
71
26.9
31.4
0.56
0.60
0.65
0.69
•• 2022 xx 11.513
74
78
32.6
38.1
0.57
0.60
0.66
0.70
70
•• 11 x 1311
24 x 75
56
36.3
14.5
0.62
0.45
0.72
0.51 100
•• 11 x 1311
24 x 81
60
43.9
17.2
0.64
0.46
0.74
0.53
•• 1213 xx 1111 57
59
15.7
16.9
0.47
0.47
0.54
0.54
•• 1213 xx 1111 62
63
18.5
20.1
0.46
0.49
0.54
0.56
14 x 11 * 61 19.4 0.50 0.58 14 x 11 * 66 23.0 0.51 0.59
•• 1618 xx 1111.5 64
67
22.2
25.5
0.52
0.55
0.60
0.63
•• 1618 xx 1111.5 69
72
26.3
30.2
0.53
0.56
0.61
0.65
•• 2022 xx 11.5
13
70
74
28.9
33.8
0.57
0.59
0.66
0.69
•• 2022 xx 11.5
13
75
79
34.2
40.0
0.59
0.62
0.68
0.71
• 13
24 x 77 39.0 0.63 0.73 • 13
24 x 83 46.1 0.64 0.74
Performance data derived from tests that conform with ASAE Standards; Rotors
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 107
Rotors
4,0
•• 11 x 1311 24 x 22,0
16,4
7,56
3,01
2,10
0,84
16
11
18
13 6,0
•• 11 x 1311 24 x 24,0
17,8
9,36
3,65
2,60
1,01
16
12
19
13
•• 1213 xx 1111 16,7
17,3
3,26
3,52
0,90
0,98
12
12
14
14
•• 1213 xx 1111 18,2
18,7
3,93
4,25
1,09
1,18
12
12
14
14
14 x 11 * 17,9 4,03 1,12 13 15 14 x 11 * 19,5 4,87 1,35 13 15
•• 1618 xx 1111,5 18,8
19,6
4,62
5,28
1,28
1,47
13
14
15
16
•• 1618 xx 1111,5 20,5
21,4
5,57
6,39
1,55
1,77
13
14
15
16
•• 2022 xx 11,5 13
20,5
21,6
6,00
7,02
1,67
1,95
14
15
16
17
•• 2022 xx 11,5 13
22,3
23,5
7,25
8,48
2,01
2,35
15
15
17
18
4,5
•• 11 x 1311
24 x 22,6
16,7
8,10
3,17
2,25
0,88
16
11
18
13 6,5
•• 11 x 1311
24 x 24,5
18,1
9,78
3,81
2,71
1,06
16
12
19
13
•• 1213 xx 1111 17,1
17,6
3,43
3,70
0,95
1,03
12
12
14
14
•• 1213 xx 1111 18,6
19,0
4,09
4,44
1,14
1,23
12
12
14
14
14 x 11 * 18,3 4,24 1,18 13 15 14 x 11 * 19,9 5,08 1,41 13 15
•• 1618 xx 1111,5 19,2
20,0
4,86
5,56
1,35
1,54
13
14
15
16
•• 1618 xx 1111,5 20,9
21,8
5,81
6,67
1,61
1,85
13
14
15
16
•• 2022 xx 11,513
21,0
22,1
6,32
7,38
1,75
2,05
14
15
17
17
•• 2022 xx 11,513
22,7
23,9
7,57
8,85
2,10
2,46
15
15
17
18
5,0
•• 11 x 1311
24 x 23,1
17,1
8,52
3,33
2,36
0,92
16
11
18
13 6,9
•• 11 x 1311
24 x 25,0
18,3
10,20
3,90
2,83
1,08
16
12
19
13
•• 1213 xx 1111 17,5
18,0
3,59
3,89
1,00
1,08
12
12
14
14
•• 1213 xx 1111 18,9
19,2
4,20
4,56
1,17
1,27
12
12
14
14
14 x 11 * 18,7 4,45 1,23 13 15 14 x 11 * 20,1 5,22 1,45 13 15
•• 1618 xx 1111,5 19,6
20,5
5,10
5,84
1,41
1,62
13
14
15
16
•• 1618 xx 1111,5 21,0
22,0
5,97
6,86
1,66
1,90
13
14
16
16
•• 2022 xx 11,5
13
21,4
22,6
6,63
7,75
1,84
2,15
14
15
17
18
•• 2022 xx 11,5
13
22,9
24,1
7,76
9,08
2,15
2,52
15
16
17
18
• 13
24 x 23,6 8,94 2,48 16 19 • 13
24 x 25,3 10,46 2,90 16 19
Rotors Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
108 www.rainbird.com
Rotors
Rotor Accessories
TSJ Series
Swing Joints
Double O-ring seals keep water in and dirt out, ensuring joints are
kept clean and can be repositioned more easily.
Features
•High operating pressure rating (315 psi) is perfect for use in constant
pressure situations.
•Excellent structural integrity from the swept elbow design reduces
the costs associated with fatigue-related failures.
•Oversized threaded inlets and large visible stops make
hand-tightening simple.
•Spigot inlet available on 1" swing joints.
Operating Range
•Pressure Rating: 315 psi (21,7 bars) @ 73° F (22,8° C)
• 3⁄4" TSJ pressure loss: 0.3 psi (0,02 bar) at 6 GPM (0,4 l/s) TSJ-12075, TSJ-12, TSJ-12SPGT,
TSJ-12150, TSJ-18SPGT, TSJ-18
•1" TSJ pressure loss: 1.5 psi (0,1 bar) at 18 GPM (1,1 l/s);
2.5 psi (0,2 bar) at 23 GPM (1,5 l/s)
•11⁄2" TSJ pressure loss: 0.5 psi (0,03 bar) at 40 GPM (2,5 l/s); 1.6 psi (0,1
bar) at 70 GPM
Models
•TSJ-12075: 12" (30,5 cm) long, 3⁄4" (20/27) M x M NPT swing joint
•TSJ-12: 12" (30,5 cm) long, 1" (26/34) M x M NPT swing joint
•TSJ-12SPGT: 12" (30,5 cm) long, 1" (2,5 cm) spigot x 1" (26/34)
M NPT swing joint
•TSJ-12150: 12" (31 cm) long, 1 1⁄2" (40/49) M x M NPT swing joint
•TSJ-18: 18" (45,7 cm) long, 1" (26/34) M x M NPT swing joint
•TSJ-18SPGT: 18" (45,7 cm) long, 1" (2,5 cm) spigot x 1" (26/34)
M NPT swing joint
BSP version of TSJ-12 available
Rotors
www.rainbird.com 109
Rotors
Rotor Accessories
TSJ-PRS Series
Pressure Regulating Swing Joints
All the great features of the Rain Bird Turf Swing Joint combined
with a pressure regulating outlet elbow.
Features
•Regulation pressures are preset to a nominal value for each TSJ-PRS:
• 45 psi (3,1 bars) for 3⁄4" swing joint.
• 70 psi (4,8 bars) for 1" swing joint.
•Allows each rotor on a zone to operate at the same pressure,
improving consistency and overall system performance.
•Installs quickly and easily, like all Rain Bird turf swing joints.
TSJ-075-PRS, TSJ-100-PRS
Specifications
• 3⁄4" TSJ-PRS nominal pressure setting: 45 psi (3,1 bars).
TSJ-PRS Pressure Regulation •1" TSJ-PRS nominal pressure setting: 70 psi (4,8 bars).
metric
TSJ-PRS Pressure
standard Regulation •Maximum flow: 22 GPM (1,4 l/s).
•Pressure rating: 315 psi (21,7 bars) at 73° F (22,8° C)
Swing Joint Outlet (Rotor Inlet)
80
70 Models
Pressure (psi)
TSJ-100-PRS
60 •TSJ-075-PRS: 3⁄4" swing joint with 45 psi pressure regulator, 12"
(30,5 cm) long, 3⁄4" (20/27) M x M NPT inlet and outlet
50
TSJ-075-PRS
•TSJ-100-PRS: 1" swing joint with 70 psi pressure regulator, 12"
40
(30,5 cm) long, 1" (26/34) M x M NPT inlet and outlet
30
20
20 30 40 50 60 70 80 90 100 110 120 130 140 150
Swing Joint Inlet Pressure (psi)
metric
TSJ-PRS Pressure Regulation
standard METRIC
Swing Joint Outlet (Rotor Inlet)
5,5
4,8
Pressure (bars)
TSJ-100-PRS
4,1
3,5
2,8 TSJ-075-PRS
2,1
1,4
1,4 2,1 2,8 3,5 4,1 4,8 5,5 6,2 6,9 7,6 8,3 9,0 9,7 10,3
Swing Joint Inlet Pressure (bars)
Rotors
110 www.rainbird.com
Rotors
Rotor Accessories
A49119
ROTORTOOL HOLDUPTOOL
Model
• 42006
41045
42001
42049 42006
Rotors
www.rainbird.com 111
Rotors
Rotor Accessories
Rotor Body Style “H” Driver Snap-ring Pliers NEW Selector Valve Key NEW
Assembly Wrench
•For removing vandal-resistant •Used to remove snap rings from •Used to manually operate and
•For holding body while cover screws from plastic-cover inside the case of the 115-E service electric 115-E rotors.
assembling or removing impact rotors. rotor.
body from bearing on 21AP, Model
31AP, 41-51AP, 27AP, 37AP, Model Model • EGL-SVK
47A-SAM, and 41-51A-SAM • 42050 • SR-700
rotors.
Model
•42005
Valve Insertion NEW Right Choice in 3500 Right Choice in 5000 Right Choice in 5000
Tool and Rotors Sales Brochure Rotors Sales Brochure Plus Rotors Sales
Installation Socket Features Features
Brochure
•Used by contractors when •Used by contractors when Features
•Used to insert the valve recommending 3500 Series recommending 5000 Series •Used by contractors when
assembly, top-serviceable rock Rotors to homeowners. Rotors to homeowners. recommending 5000 Plus
screen and replaceable
•Photos and features to educate •Photos and features to educate Series Rotors to homeowners.
valve seat in all 115-E rotor
prospective customers. prospective customers. •Size is 8 1⁄2" wide a 11" high.
valve-in-head models.
•Size is 8 1⁄2" wide a 11" high. •Size is 8 1⁄2" wide a 11" high. •3-hole punched; Packs of 50.
Models •3-hole punched; Packs of 50. •3-hole punched; Packs of 50. •Contractors order through
• VTDR •Contractors order through •Contractors order through Rain Bird Rewards:
Rain Bird Rewards: Rain Bird Rewards: rainbird.com/rewards or
• IS-TSRS
rainbird.com/rewards or rainbird.com/rewards or 1-888-370-1814.
1-888-370-1814. 1-888-370-1814. •Reference no. D39450A.
•Reference no. D39429A. •Reference no. D39428D.
Rotors
112 www.rainbird.com
Spray Heads
Rotary Nozzles
Impacts
Rotors
Impacts
Valves
Controllers
On December 18, 1933, a request was filed for a patent on a device described as a spring-
activated horizontal impact arm-driven sprinkler. Once granted, Rain Bird was up and
running with the industry's first impact sprinkler. Decades later, Rain Bird continues to Commercial
Pump Stations
make history with impact sprinklers that reliably and durably elevate the standard for
Accessories
Resources
& Training
Reference
Impacts
Major Products
2045-PJ 20BP-ADJ 25BPJ-ADJ 35A-TNT 65PJADJ-TNT
Maxi-Bird
Primary Applications
Slopes • • • • •
Ground Cover/Shrubs • • • • •
Low Pressure Systems • • •
High Wind Areas • • •
Effluent Water • • • • •
Impacts
114 www.rainbird.com
Impacts
2045-PJ Maxi-Bird™
1
⁄2" (15/21) riser-mounted impact head used for slope and
large-area, above-grade applications.
Features
•Double-weighted arm for slower rotation and increased
distance of throw.
•Adjustable arm spring for low-pressure and low-gallonage operation.
•Precision Jet tube (PJ™) minimizes side splash.
•Interchangeable, color-coded bayonet mount nozzles.
•No tools required to change nozzles.
•FP trip permits full- or part-circle operation (20° to 340°).
•Powerful reverse action.
Specifications
• 1⁄2" (15/21) male threaded inlet nozzles
•Nozzle outlet trajectory:
23° for 06, 07, 08, 10, and 12 nozzles.
•11° for 07 LA and 10 LA
•Standard trajectory angle nozzles: 06-red; 07-black; 08-blue;
10-yellow; 12-beige
•Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow
Model
•2045-PJ-08 Maxi-Bird
2045-PJ-08 Nozzles
Impacts
www.rainbird.com 115
Impacts
35
•• 1206 39
37
5.5
2.0
0.70
0.28
0.80
0.32 2,5
•• 1206 12,3
11,3
1,32
0,46
0,37
0,13
18
7
20
8
•• 0707 LA 23
37
1.9
2.7
0.69
0.38
0.80
0.44
•• 0707 LA 7,1
11,4
0,44
0,62
0,12
0,17
17
10
20
11
•• 0810 *LA 38
29
3.3
4.0
0.44
0.92
0.51
1.06
•• 0810 LA 11,7
8,9
0,76
0,92
0,21
0,26
11
23
13
27
•• 1012 41
42
4.8
6.3
0.55
0.69
0.64
0.79
•• 1012 12,5
12,9
1,11
1,45
0,31
0,40
14
18
16
20
45 •• 0607 LA 38
25
2.3
2.1
0.31
0.65
0.35
0.75
3,0
•• 0607 LA 11,5
7,5
0,51
0,47
0,14
0,13
8
17
9
19
•• 0708 * 39
40
3.0
3.7
0.38
0.45
0.44
0.51
•• 0708 11,8
12,1
0,67
0,83
0,19
0,23
10
11
11
13
•• 1010 LA 31
42
4.5
5.4
0.90
0.59
1.04
0.68
•• 1010 LA 9,4
12,8
1,01
1,21
0,28
0,34
23
15
27
17
55
•• 1206 44
38
7.1
2.5
0.71
0.33
0.82
0.39 3,5
•• 1206 13,3
11,6
1,59
0,55
0,44
0,15
18
8
21
9
•• 0707 LA 25
41
2.3
3.3
0.71
0.38
0.82
0.44
•• 0707 LA 7,6
12,2
0,50
0,72
0,14
0,20
17
10
20
11
•• 0810 *LA 41
32
4.1
5.0
0.47
0.94
0.54
1.09
•• 0810 LA 12,4
9,6
0,89
1,09
0,25
0,30
12
23
13
27
•• 1012 43
45
6.0
7.9
0.62
0.75
0.72
0.87
•• 1012 13,0
13,6
1,30
1,72
0,36
0,48
15
19
18
21
60 •• 0607 LA 38
25
2.6
2.4
0.35
0.74
0.40
0.85
4,0
•• 0607 LA 11,6
7,6
0,58
0,54
0,16
0,15
9
18
10
21
•• 0708 * 41
42
3.5
4.2
0.40
0.46
0.46
0.53
•• 0708 12,5
12,7
0,78
0,94
0,22
0,26
10
12
11
14
•• 1010 LA 32
44
5.4
6.4
1.02
0.64
1.17
0.74
•• 1010 LA 9,8
13,3
1,19
1,42
0,33
0,39
25
16
29
19
• 12 45 8.4 0.80 0.92
• 12 13,7 1,86 0,52 20 23
Precipitation Rates based on half-circle operation.
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
* Standard Nozzle Size
Performance data collected in zero wind conditions.
Impacts Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
116 www.rainbird.com
Impacts
Performance data derived from tests that conform with ASAE Standards; Impacts
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 117
Impacts
Models
•25BPJ-FP-ADJ
•25BPJ-FP-ADJ-DA
25BPJ-FP-ADJ
•25BPJ-FP-ADJ-DA-TNT
Brass nozzle with bridge-mounted stainless steel
•25BPJ Special diffuser pin and non-clog, barrel-type vane.
Diffuser pin allows up to 25% radius reduction
without changing nozzles.
Nozzle
09
25BPJ Special
Same as model 25 BPJ-FP-ADJ-DA-TNT,
Model with tamper-resistant friction collars and
25BPJ-FP-ADJ fixed trip for part-circle operation only.
25BPJ-ADJ-DA-TNT
Same as model 25BPJ-FP-ADJ-DA,
with longer wearing TNT bearing.
Impacts Performance data derived from tests that conform with ASAE Standards;
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
118 www.rainbird.com
Impacts
Nozzle
10
Model
35A-PJADJ-TNT
35A-PJDA-TNT
35A-ADJ-TNT
Same as model 35A-TNT, with Precision Jet Same as model 35A-TNT with
tube (PJ™) and distance control flap (DA). distance control diffuser pin (ADJ). 35A-PJADJ-TNT
Same as model 35A-TNT, with Precision Jet tube
(PJ™) and distance control diffuser pin (ADJ).
Performance data derived from tests that conform with ASAE Standards; Impacts
ASAE S398.1. See page 6 for complete ASAE Test Certification Statement.
www.rainbird.com 119
Impacts
Specifications
•1" (26/34) female NPT or BSP threaded inlet.
•Nozzle outlet trajectory: 27°
Model
•65PJADJ-TNT
•65PJADJ-TNT-BSP: BSP model
How To Specify
65PJADJ- TNT
Nozzle
16
65PJADJ-TBT
Model
65PJADJ-TNT
Impacts
120 www.rainbird.com
Spray Heads
Rotary Nozzles
Valves
Rotors
Impacts
Valves
Controllers
brass, Rain Bird valves are built to take on the toughest application challenges, even Commercial
Pump Stations
under the worst conditions. Low flow or high pressure, effluent water, grit, sand, you
name it, Rain Bird has the valve to tame it. And to finish your professional installations,
®
Install Rain Bird Valves.
Accessories
Resources
& Training
Reference
Valves
Major Products
DV DVF JTV JTVF ASVF PGA PEB PESB GB EFB-CP BPE BPES QC
Primary Applications
Sizes 3
⁄4", 1" 1" 1" 1" 3
⁄4", 1" 1", 11⁄2", 2" 1", 11⁄2", 2" 1", 11⁄2", 2" 1", 11⁄4", 11⁄2", 2" 1", 11⁄4", 11⁄2", 2" 3" 3" 3
⁄4", 1", 11⁄2"
0.2–22 ( 3⁄4") 0.2–22 ( 3⁄4")
Flow (GPM) 0.2–40 ( 1") 0.2–40 0.25–30 1–30 0.2–40 ( 1") 2–150 0.25–200 0.25–200 5–200 5–200 60–300 60–300 10–125
0,05–5,0 ( 3⁄4") 0,05–5,0 ( 3⁄4")
(m3/h) 0,05–9,08 ( 1") 0,05–9,08 0,06–6,82 0,23–6,82 0,05–9,08 ( 1") 0,45–34,05 0,06–45,40 0,06–45,40 1,14–45,40 1,14–45,40 13,62–68,10 13,62–68,10 3–28
(l/s) 0,01–1,39 ( 3⁄4") 0,01–1,39 ( 3⁄4")
0,01–2,52 ( 1") 0,01–2,52 0,02–1,89 0,06–1,89 0,01–2,52 ( 1") 0,13–9,45 0,02–12,60 0,02–12,60 0,32–12,60 0,32–12,60 3,78–18,90 3,78–18,90 0,83–7,78
Pressure (psi) 15–150 15–150 15–150 15–150 15–150 15–150 20–200 20–200 15–200 15–200 20–200 20–200 5–125
(bars) 1,03–10,34 1,03–10,34 1,03–10,34 1,03–10,3 1,03–10,34 1,03–10,34 1,38–13,80 1,38–13,80 1,04–13,80 1,04–13,80 1,38–13,80 1,38–13,80 0,4–8,6
Manual Bleed I/E I/E I/E I/E I/E I I/E I/E I/E I/E E E
Flow Control • • • • • • • • • •
Bottom Inlet DV-A DVF-A • • • • •
Low Flow • • • • • • • •
PRS-D Compatible • • • • • • •
Dirty Water • • •
Non-Potable Water • • • • • • • •
Sites Requiring Brass • • • • •
Sites Requiring Plastic • • • • • • • •
• DV/DVF available in globe, angle, slip x slip, male x male and male x barb configurations. • Flows below 3 GPM (0,68 m3/h; 0,19 l/s) install RBY filter upstream. • I/E = Internal/External
• JTV/JTVF available in globe, slip x slip, male x male and male x barb configurations.
Valves
122 www.rainbird.com
Valves
DV Series Dimensions
3
⁄4", 1" (20/27, 26/34) •Height: 41⁄2" (11,4 cm)
•Height (Angle): 51⁄2" (14 cm)
Double-filtered pilot-flow design for maximum reliability. •Length: 43⁄8" (11,1 cm)
Balanced-pressure diaphragm for long life. Length (Angle): 33⁄4" (9,5 cm)
Length (MM): 53⁄8" (13,6 cm)
Energy-efficient, low-power encapsulated solenoid with captured Length (MB): 53⁄4" (14,6 cm)
plunger and 90 mesh (200 micron) solenoid filter. •Width: 31⁄3" (8,4 cm)
Features Models
•External bleed to manually flush system of dirt and debris during •075-DV: 3⁄4" (20/27)
installation and system start-up. •100-DV: 1" (26/34)*
•Internal bleed for spray-free manual operation. •100-DV-SS: 1" (26/34)
•Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot •100-DV-A: 1" (26/34)*
water filter and captive spring. •100-DV-MM: 1" (26/34)*
•Operates in low-flow and Xerigation® applications when the •100-DV-MB: 1" (26/34)
RBY filter is installed upstream.
•125-DV-MB: 1" (26/34)M x 11⁄4" (33/42)B
•11⁄4" (3,2 cm) stainless steel phillips head screws. * Available with BSP threads
•Slip-by-slip configuration for low-cost, solvent-weld installations. 1: Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec.
(2,3 m/s) in order to reduce the effects of water hammer.
•Male by male configuration for quick and easy manifolding. 2: DV Series valves cannot be used with PRS pressure regulating modules.
•Male by barb configuration for installation with poly pipe.
•Angle configuration for flexible installations especially when
submains are deep.
•Accepts latching solenoid for use with Rain Bird battery-operated
controllers.
Valves
www.rainbird.com 123
Valves
DVF Series
1" (26/34)
Operating Range
•Pressure: 15 to 150 psi (1,03 to 10,34 bars)
•100-DVF Flow: 0.2 to 40 GPM (0,05 to 9,08 m3⁄h; 0,01 to 2,52 l/s).
For flows below 3 GPM (0,68 m3⁄h; 0,19 l/s) or any Xerigation®
products applications, use RBY-100-200MX Filter installed
upstream.
•Water temperature: up to 110° F (43° C)
•Ambient temperature: Up to 125° F (52° C)
Electrical Specifications
•24 VAC 50/60 Hz (cycles/sec.) solenoid
•Inrush current: 0.30 A (7.2 VA) at 60 Hz
•Holding current: 0.19 A (4.6 VA) at 60 Hz
•Coil resistance: 42-55 Ohms
Dimensions
•Height: 53⁄5" (14,2 cm)
•Height (Angle): 6.1" (15.5 cm)
•Length: 43⁄8" (11,1 cm)
Length (Angle): 33⁄4" (9,5 cm)
Length (MM): 53⁄8" (13,6 cm)
Length (MB): 53⁄4" (14,6 cm)
100-DVF-SS
•Width: 31⁄3" (8,4 cm)
Models
•100-DVF: 1" (26/34)*
•100-DVF-SS: 1" (26/34)
•100-DVF-A: 1" (26/34)
•100-DVF-MM: 1" (26/34)*
•100-DVF-MB: 1" (26/34)
* Available with BSP threads.
1: Rain Bird recommends flow rates in the supply line not to exceed
7.5 ft./sec. (2,3 m/s) in order to reduce the effects of water hammer.
2: DVF Series valves cannot be used with PRS pressure regulating modules.
100-DVF-MM 100-DVF-A
Valves
124 www.rainbird.com
Valves
DV and DVF Valve Pressure Loss (psi) DV and DVF Valve Pressure Loss (bars) METRIC
100-DV/DVF Angle, MxM, MxB Valve Pressure Loss (psi) 100-DV/DVF Angle, MxM, MxB Valve Pressure Loss (bars) METRIC
Flow Angle Male x Barb Male x Male Flow Angle Male x Barb Male x Male
GPM 1" psi 1" psi 1" psi m3/h l/s 1" bars 1" bars 1" bars
1 1.6 2.2 2.2 0,23 0,06 0,11 0,15 0,15
3 1.6 2.2 2.2 0,68 0,19 0,11 0,15 0,15
5 1.8 2.4 2.4 1,14 0,32 0,12 0,17 0,17
10 2.3 2.7 2.7 2,27 0,63 0,16 0,19 0,19
20 3.6 5.2 4.6 4,54 1,26 0,25 0,36 0,32
30 5.5 10.5 8.2 6,81 1,89 0,38 0,72 0,57
40 9.1 18.5 14.1 9,08 2,52 0,63 1,28 0,97
Note: See Xerigation section for RBY Filter flow loss data.
Note: DV/DVF Male x Male and Male x Barb not recommended for
flows exceeding 30 GPM (6,81 m3/h, 1,89 l/s).
Valves
www.rainbird.com 125
Valves
Dimensions
•Height: 61⁄4" (15,8 cm)
•Length: 61⁄10" (15,5 cm)
•Width: 31⁄5 " (8,1 cm)
Models
•075-ASVF: 3⁄4" (20/27)
•100-ASVF: 1" (26/34)
Models available in NPT threads only.
100-ASVF
Valves
126 www.rainbird.com
Valves
DV Union Series Union x Union and Union x Barb Valve Pressure Loss (psi)
1" (26/34)
Flow Union x Union Union x Barb
1" Union-by-Union (UU) female union thread configuration for (GPM) 1" (psi) 1" (psi)
quick and easy manifolding. 1 2.3 2.0
1" Union-by-Barb (UB) female union thread inlet by barb outlet 3 2.9 2.3
configuration for quick and easy manifolding for poly pipe 5 3.1 2.9
installations. 10 3.9 3.7
20 7.5 6.6
Operating Range
•100-DV/DVF (union) Flow: 0.2 to 20 GPM (0,05 to 4,54 m3/h, 0,01 to Union x Union and Union x Barb Valve Pressure Loss (bars) METRIC
1,26 l/s); for flows below 3 GPM (0,68 m3/h; 0,19 l/s) or any
Xerigation® application, use RBY-100-200MX filter installed upstream Flow Union x Union Union x Barb
(m3/h) 1" (bars) 1" (bars)
Electrical Specifications 0,23 0,16 0,14
•24 VAC 50/60 Hz (cycles per second) solenoid power requirement 0,68 0,20 0,16
•0.30 A (7.2 VA) inrush current 1,14 0,21 0,20
•0.19 A (4.6 VA) holding current 2,27 0,27 0,26
4,54 0,52 0,46
•Solenoid coil resistance: 38 Ohms
DV/DVF Union x Union and Union x Barb not recommended for flows
Dimensions exceeding 20 GPM (4,54 m3/h; 1,26 l/s).
DV SERIES
•Height: 41⁄2" (11,4 cm)
•Length: (UU) 57⁄8" (14,9 cm) (UB) 6" (15,2 cm)
•Width: 31⁄3" (8,4 cm)
DVF SERIES
•Height: 53⁄5" (14,2 cm) 100-DV-UU
•Length: (UU) 57⁄8" (14,9 cm) (UB) 6" (15,2 cm)
•Width: 31⁄3" (8,4 cm)
Models
•100-DV-UU: 1" (26/34)*
•100-DV-UB: 1" (26/34)
•100-DVF-UU: 1" (26/34)*
•100-DVF-UB: 1" (26/34)
*Available with BSP threads
How To Specify
100 - DVF - MB
Optional Configuration:
100-DVF-UB UU: Union x Union
UB: Union x Barb
Optional Feature
F: Flow Control
Model
DV: Remote Control Valve
Size
100: 1" (26/34)
Note: For non-U.S. applications it is necessary to
specify NPT or BSP thread type.
Valves
www.rainbird.com 127
Valves
Features
Reliability
•Balanced-pressure diaphragm for long life.
•Buna-N diaphragm with self-cleaning 90-mesh (200 micron) pilot
water filter and stainless steel spring.
•Energy efficient, low-power encapsulated solenoid with
captured plunger.
Versatility
•Accepts latching solenoid for use with Rain Bird battery-operated
controllers.
•Available in multiple fitting types.
•External bleed to manually flush system of dirt and debris during
installation and system start up.
•Internal bleed for spray-free manual operation.
NEW •Available with optional flow control feature.
Ease of Service
100-JTVF-MB
•Trouble-free service with few parts.
•Drop-in diaphragm for effortless maintenance.
Operating Range
•Pressure: 15 to 150 PSI (1,0 to 10,3 bar)
•Flow: 1 to 30 GPM (0,23 to 6,82 m3/h; 0,06 to 1,89 l/s); for flows below
3 GPM (0,68 m3/h; 0,19 l/s) or any Xerigation® application, use
RBY-100-200MX filter installed upstream
How To Specify •Operating Temperatures: Water temperature up to 110° F (43° C);
ambient temperature up to 125° F (52° C)
100 - JTV - SS
Optional
Configuration:
SS: Slip x Slip
MM: Male x Male NEW
MB: Male x Barb
Model
JTV: Jar Top Valve 100-JTV-MM
JTVF: Jar Top Valve
Size
100: 1" (26/34)
Note: For non-U.S. applications it is necessary
to specify NPT or BSP thread type (1” only)
Valves
128 www.rainbird.com
Valves
Electrical Specifications
Jar Top Valve Pressure Loss (psi)
•24 VAC 50/60 Hz (cycles/sec.) solenoid
•Inrush current: 0.30 A (7.2 VA) at 60 Hz JTV/JTVF Male x Barb Male x Male
•Holding current: 0.19 A (4.6 VA) at 60 Hz GPM psi psi psi
•Coil resistance: 42-55 Ohms 1.0 3.3 1.4 2.2
3.0 3.3 2.6 3.2
Dimensions 5.0 4.3 3.0 3.7
10 5.4 3.7 5.2
•Height: 5" (12,7 cm)
15 5.8 5.2 5.9
•Length: 4" (10,2 cm) 20 6.2 8.0 7.3
•Length (MxM): 5.4" (13,7 cm) 30 9.5 15.8 13.3
•Length (MxB): 5.8" (14,7 cm)
•Width: 31⁄8" (7,9 cm)
Jar Top Valve Pressure Loss (bars) METRIC
Models
•100-JTV: 1" (26/34) female x female threaded* JTV/JTVF Male x Barb Male x Male
m3/h l/s bar bar bar
•100-JTV-SS: 1" (26/34) slip x slip
0,23 0,06 0,23 0,10 0,15
NEW •100-JTV-MM: 1" male x male* 0,68 0,19 0,23 0,18 0,22
NEW •100-JTV-MB: 1" male x barb 1,14 0,32 0,30 0,21 0,26
NEW •100-JTVF: 1" female x female with flow control* 2,27 0,63 0,37 0,26 0,36
NEW •100-JTVF-SS: 1" slip x slip with flow control 3,41 0,95 0,40 0,36 0,41
4,54 1,26 0,43 0,55 0,50
NEW •100-JTVF-MM: 1" male x male with flow control*
6,81 1,89 0,66 1,09 0,92
NEW •100-JTVF-MB: 1" male x barb with flow control
* BSP threads available; specify when ordering
Valves
www.rainbird.com 129
Valves
PGA Series
1", 11⁄2", 2" (26/34, 40/49, 50/60)
Features
•Globe and angle configuration for flexibility in design and
installation.
•Slow closing to prevent water hammer and subsequent system
damage.
•One-piece solenoid with captured plunger and spring for easy
servicing. Prevents loss of parts during field service.
•Non-rising flow control handle adjusts water flow as needed.
•Manual internal bleed operates the valve without allowing water into
the valve box. Allows pressure regulator adjustment without turning
on the valve at the controller.
•Double filtered pilot flow prevents clogging solenoid ports.
•Normally closed, forward flow design.
Operating Range
•Pressure: 15 to 150 psi (1,04 to 10,35 bars)
How To Specify •PRS-D regulates up to 100 psi (6,90 bars)
•Flow: 2 to150 GPM (0,45 to 34,05 m3/h; 0,13 to 9,45 l/s)
100 - PGA - PRS-D
•Flow with PRS-D: 5 to 150 GPM (1,14 to 34,05 m3/h; 0,32 to 9,45 l/s)
•Water temperature: up to 110° F (43° C) - refer to chart
Model
PGA •Ambient temperature: up to 125° F (52° C)
Optional
Feature
PRS-D: pressure
Size regulating Electrical Specifications
11⁄2" (40/49) module
•24 VAC 50/60 Hz (cycles/sec.) solenoid
Note: Valve and PRS-D module must be ordered •Inrush current: 0.41 A (9.84 VA) at 60Hz
separately. For non-U.S. applications, it is
necessary to specify NPT or BSP thread type. •Holding current: 0.28 A (6.72 VA) at 60Hz
•Coil resistance: 30-39 Ohms
Valves
130 www.rainbird.com
Valves
Models
PGA Series Valve Pressure Loss (psi)
•100-PGA 1" (26/34)
•150-PGA 11⁄2" (40/49) Flow 100- 100- 150- 150- 200- 200-
•200-PGA 2" (50/60) GPM PGA PGA PGA PGA PGA PGA
BSP threads available; specify when ordering.
Globe Angle Globe Angle Globe Angle
1" 1" 11⁄2" 11⁄2" 2" 2"
Dimensions 1 5.1 5.1 - - - -
5 5.5 5.5 - - - -
Height Length Width 10 5.9 5.9 - - - -
•100-PGA 71⁄4" (18,4 cm) 51⁄2" (14,0 cm) 31⁄4" (8,3 cm) 20 6.0 6.0 - - - -
•150-PGA 8" (20,3 cm) 63⁄4" (17,2 cm) 31⁄2" (8,9 cm) 30 6.4 6.4 1.9 1.3 - -
•200-PGA: 10" (25,4 cm) 73⁄4" (23,5 cm) 5" (12,7 cm) 40 7.0 7.0 3.2 2.0 1.2 1.0
Note: PRS-D adds 2" (5,1 cm) to valve height. 50 - - 4.8 3.0 1.5 0.9
Recommendations
75 - - 11.1 6.5 3.0 1.7
1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec. 100 - - 19.2 11.7 5.5 3.0
(2,29 m/s) in order to reduce the effects of water hammer. 125 - - - - 8.6 4.8
2. For flows below 5 GPM (1,14 m3⁄h; 0,32 l/s), Rain Bird recommends use of 150 - - - - 12.0 6.5
upstream filtration to prevent debris from collecting below the diaphragm.
3. For flows below 10 GPM (2,27 m3⁄h; 0,63 l/s) Rain Bird recommends the flow
control stem be turned down two full turns from the fully open position.
PGA Series Valve Pressure Loss (bars) METRIC
Valves
www.rainbird.com 131
Valves
PEB Cutaway
Durable glass-filled nylon construction for long life and reliable
performance. Stainless steel studs molded into the body resist
thread damage.
Features
•Low flow operating capability for a wide range of applications.
•Plastic scrubber on the PESB valve scrapes the stainless steel screen
to clean and break down grit and plant material. Prevents debris
build-up and clogging.
•One-piece solenoid with captured plunger and spring for easy
servicing. Prevents loss of parts during field service.
•Flow control handle adjusts water flow as needed.
•Manual internal bleed operates the valve without allowing water into
the valve box. Allows pressure regulator adjustment without turning
on the valve at the controller.
•Manual external bleed permits flushing debris from the system.
Recommended for system start up and after repairs.
•Normally closed, forward flow design.
PESB Cutaway •Globe configuration.
Model
PEB
Optional Feature
Size PRS-D: pressure
1" (26/34) regulating module
Valves
132 www.rainbird.com
Valves
Operating Range
PEB and PESB Series Valve Pressure Loss (psi)
•Pressure: 20 to 200 psi (1,38 to 13,80 bars)
•PRS-D regulates up to 100 psi (6,90 bars) Flow 100-PEB 150-PEB 200-PEB
•Flow: 0.25 to 200 GPM (0,06 to 45,40 m3⁄h; 0,02 to 12,60 l/s) GPM 1" 11⁄2" 2"
•Flow with PRS-D: 5 to 200 GPM (1,14 to 45,40 m3⁄h; 0,32 to 12,60 l/s) 0.25 0.8 - -
0.5 1.0 - -
•Water temperature: up to 150° F (66° C) 1 1.3 - -
•Ambient temperature: up to 150° F (66° C) 5 1.7 - -
10 1.8 - -
Electrical Specifications 20 2.9 3.9 -
•24 VAC 50/60 Hz (cycles/sec.) solenoid 30 5.6 3.6 -
•Inrush current: 0.41 A (9.84 VA) at 60Hz 40 10.0 3.5 -
50 15.6 3.6 4.8
•Holding current: 0.28 A (6.72 VA) at 60Hz
75 - 5.4 4.5
•Coil resistance: 30-39 Ohms 100 - 9.6 5.2
125 - 14.6 8.2
Dimensions 150 - 21.2 11.8
Height Length Width 175 - - 15.5
•100 PEB and PESB: 61⁄2" (16,5 cm) 4" (10,2 cm) 4" (10,2 cm) 200 - - 19.5
•150 PEB and PESB: 8" (20,3 cm) 6" (15,2 cm) 6" (15,2 cm)
•200 PEB and PESB: 8" (20,3 cm) 6" (15,2 cm) 6" (15,2 cm)
Note: The PRS-D option adds 2" (5,1 cm) to valve height. PEB and PESB Series Valve Pressure Loss (bars) METRIC
Valves
www.rainbird.com 133
Valves
NEW
PESB-R Series Valves
Durable chlorine-resistant valves for reclaimed water applications
Features
•One-piece solenoid design with captured plunger and spring for easy
150PESB-R
servicing. Prevents loss of parts during field service.
•PESB-R Conversion Kits also available to convert existing PEB and
PESB valves to reclaimed water valve. Kit includes NP handle, sticker,
diaphragm assembly, scraper and snap washer.
•Stainless steel studs molded into the body. Bonnet can be attached
and removed easily without damaging threads.
•External bleed protects the solenoid ports from debris when system
is flushed.
•Internal bleed operates the valve without allowing water into the
valve box; allows pressure regulator to be adjusted without turning
on the valve at the controller first.
• Low flow operating capability (0.25 gpm; 0,06 m3/h; 0,02 l/s) for a
wide range of applications.
•Slow closing to prevent water hammer and subsequent
system damage.
•Scrubber mechanism scrapes stainless steel screen clean to break
down grit and plant material.
•Purple flow control handle standard on PESB-R Series valves.
How To Specify
100 - PESBR - PRS-D
Model
PESB-R:
scrubber
model
Optional
Size Feature
100: 1" PRS-D: pressure
150: 11⁄ 2" regulating
200: 2" module
Note: Valve and PRS-D module must be
ordered separately.
Valves
134 www.rainbird.com
Valves
Operating Range
PESB-R Series Valve Pressure Loss (psi)
•Pressure: 20 to 200 psi (1,38 to 13,80 bars)
•Flow: 0.25 to 200 GPM (0,06 to 45,40 m3⁄h; 0,02 to 12,60 l/s) GPM 100 - 1" 150 - 11⁄ 2" 200 - 2"
•Flow with PRS-D: 5 to 200 GPM (1,14 to 45,40 m3⁄h; 0,32 to 12,60 l/s) 0.25 1.57 - -
•Temperature: up to 150° F (66° C) 0.5 2.97 - -
1 1.78 - -
Electrical Specifications 5 2.85 - -
10 2.88 - -
•Power: 24 VAC 50/60 cycle solenoid 20 2.55 3.47 -
•Inrush current: 0.41 A (9.84 VA) 30 5.8 3.08 -
•Holding current: 0.28 A (6.72 VA) 40 10.16 2.29 -
•Coil resistance: 30 - 39 Ohms 50 15.95 2.06 3.72
75 - 4.27 3.34
Dimensions 100 - 7.49 4.69
125 - 11.94 8.63
Height Length Width
150 - - 12.61
•100PESB-R 61⁄ 2" (16,5 cm) 4" (10,2 cm) 4" (10,2 cm) 175 - - 14.83
•150PESB-R 8" (20,3 cm) 6" (15,2 cm) 6" (15,2 cm) 200 - - 18.91
•200PESB-R 8" (20,3 cm) 6" (15,2 cm) 6" (15,2 cm)
Note: The PRS-D option adds 2" (5,1 cm) to valve height.
PESB-R Series Valve Pressure Loss (bars) METRIC
Models
•100PESB-R 1" (26/34) m3/h l/s 100 - 1" 150 - 11⁄ 2" 200 - 2"
•150PESB-R 11⁄ 2" (40/49) 0,06 0,02 0,11 - -
0,11 0,03 0,2 - -
•200PESB-R 2" (50/60)
0,23 0,06 0,12 - -
•100PESBRWK 1" (26/34) Conversion Kit 1,14 0,32 0,19 - -
•150PESBRWK 11⁄ 2" (40/49) Conversion Kit 2,27 0,63 0,2 - -
•200PESBRWK 2" (50/60) Conversion Kit 4,54 1,26 0,17 0,24 -
BSP threads available, specify when ordering. 6,81 1,89 0,39 0,21 -
9,08 2,52 0,69 0,16 -
11,36 3,16 1,09 0,14 0,25
Recommendations
1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec.
17,03 4,73 - 0,29 0,23
(2,29 m/s) in order to reduce the effects of water hammer. 22,71 6,31 - 0,51 0,32
2. For flows below 5 GPM (1,14 m3⁄h; 0,32 l/s), Rain Bird recommends use of 28,39 7,89 - 0,81 0,59
upstream filtration to prevent debris from collecting below the diaphragm. 34,07 9,46 - - 0,86
3. For flows below 10 GPM (2,27 m3⁄h; 0,63 l/s) Rain Bird recommends the flow 39,75 11,04 - - 1,01
control stem be turned down two full turns from the fully open position. 45,42 12,62 - - 1,29
Notes
1. Loss values are with flow control fully open.
2. PRS-D recommended for use in shaded area only.
Valves
www.rainbird.com 135
Valves
GB Series
1", 11⁄4", 11⁄2", 2" (26/34, 33/42, 40/49, 50/60)
Features
•Slow closing to prevent water hammer and subsequent system
damage.
•One-piece solenoid with captured plunger and spring for easy
servicing. Prevents loss of parts during field service.
•Flow control handle adjusts water flow as needed.
•Manual internal bleed operates the valve without allowing water into
the valve box. Allows pressure regulator adjustment without turning
on the controller.
•Manual external bleed permits flushing debris from the system.
Recommended for system start up and other repairs.
•Globe configuration.
How To Specify
100 - GB - PRS-D
Model 150-GB-NP-HAN
GB
Optional Feature
Size PRS-D: pressure
1" (26/34) regulating module
Valves
136 www.rainbird.com
Valves
Operating Range
GB Series Valve Pressure Loss (psi)
•Pressure: 15 to 200 psi (1,04 to 13,80 bars)
•PRS-D regulates up to 100 psi (6,90 bars) Flow 100-GB 125-GB 150-GB 200-GB
•Flow with/without PRS-D: 5 to 200 GPM (1,14 to 45,40 m3/h; GPM 1" 11⁄4" 11⁄2" 2"
0,32 to 12,60 l/s) 5 0.4 - - -
•Water temperature: up to 150° F (66° C) 10 0.8 - - -
15 1.2 - - -
•Ambient temperature: up to 150° F (66° C) 20 2.1 1.4 2.3 0.6
30 5.0 2.3 2.9 0.7
Electrical Specifications 40 8.2 4.1 2.0 0.9
•24 VAC 50/60 Hz (cycles/sec.) solenoid 50 13.0 6.8 3.3 1.1
•Inrush current: 0.41 A (9.84 VA) at 60Hz 60 - 9.8 4.6 1.7
•Holding current: 0.28 A (6.72 VA) at 60Hz 80 - 16.5 7.5 2.6
100 - - 11.8 3.9
•Coil resistance: 30-39 Ohms
120 - - 16.6 5.9
140 - - - 7.8
Dimensions 160 - - - 10.0
Height Length Width 180 - - - 12.4
•100-GB: 6" (15,2 cm) 41⁄2" (11,4 cm) 21⁄4" (5,7 cm) 200 - - - 15.1
•125-GB: 53⁄4" (14,6 cm) 5" (12,7 cm) 3" (7,6 cm)
•150-GB: 61⁄2" (16,5 cm) 51⁄2" (14 cm) 4" (10, 2 cm) GB Series Valve Pressure Loss (bars) METRIC
•200-GB: 7" (17,8 cm) 63⁄4" (17,1 cm) 51⁄4” (13,3 cm)
Note: The PRS-D option adds 2" (5,1 cm) to the valve height. Flow Flow 100-GB 125-GB 150-GB 200-GB
m3⁄h l/s 1" 11⁄2" 11⁄2" 2"
Models 1 0,28 0,13 - - -
•100-GB: 1" (26/34) 2 0,56 0,17 - - -
•125-GB: 11⁄4" (33/42)
3 0,83 0,20 - - -
4 1,11 0,24 - - -
•150-GB: 11⁄2" (40/49) 5 1,39 0,30 0,17 0,22 0,09
•200-GB: 2" (50/60) 6 1,67 0,35 0,18 0,23 0,09
BSP threads unavailable. 7 1,94 0,42 0,20 0,24 0,10
8 2,22 0,54 0,27 0,23 0,10
Recommendations 9 2,50 0,66 0,34 0,23 0,10
1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec.
10 2,78 0,83 0,42 0,23 0,10
(2,29 m/s) in order to reduce the effects of water hammer.
12 3,33 1,17 0,59 0,25 0,11
2. For flows below 5 GPM (1,14 m3⁄h; 0,32 l/s), Rain Bird recommends use of
upstream filtration to prevent debris from collecting below the diaphragm. 14 3,89 - 0,78 0,33 0,13
3. For flows below 10 GPM (2,27 m3⁄h; 0,63 l/s) Rain Bird recommends the flow
16 4,44 - 1,02 0,42 0,15
control stem be turned down two full turns from the fully open position. 22 6,11 - - 0,72 0,25
28 7,78 - - 1,23 0,43
34 9,45 - - - 0,64
40 11,11 - - - 0,87
45 12,50 - - - 1,14
Notes
1. Loss values are with flow control fully open.
Valves
www.rainbird.com 137
Valves
EFB-CP Series
1", 11⁄4", 11⁄2", 2" (26/34, 33/42, 40/49, 50/60)
Normally closed, reverse flow design ensures valve will fail in the
EFB-CP Cutaway
closed position if a tear or rip in the diaphragm occurs. Prevents
flooding, water waste and landscape damage.
Features
•Slow closing to prevent water hammer and subsequent system
damage.
•One-piece solenoid with captured plunger and spring for easy
servicing. Prevents loss of parts during field service.
•Flow control handle adjusts water flow as needed.
•Manual internal bleed operates the valve without allowing water into
the valve box. Allows pressure regulator adjustment without turning
on the controller.
•Manual external bleed permits flushing debris from the system.
Recommended for system start up and other repairs.
•Contamination-proof, self-flushing filter screen resists debris
build-up. Water flow continuously flushes the screen, dislodging
particles and debris before they can accumulate and clog the filter.
•Globe configuration.
How To Specify
100 - EFB-CP - PRS-D
150-EFB-CP-NP-HAN
Model
EFB-CP
Optional Feature
Size PRS-D: pressure
1" (26/34) regulating module
Valves
138 www.rainbird.com
Valves
Valves
www.rainbird.com 139
Valves
Features
•Slow closing to prevent water hammer and subsequent system
damage.
•BPES only: Patented nylon scrubber scrapes a stainless steel screen
to clean and break down grit and plant material. Prevents debris
build-up and clogging.
•Globe and angle configuration for flexibility in design and
installation.
•Normally closed, forward flow design.
•Robust solenoid provides dependable performance even during
constant operation.
•Flow control handle adjusts water flows as needed and
incorporates a brass thread insert for longer life.
•Manual external bleed permits flushing debris from the system.
Recommended for system start up and repairs.
•Highly efficient operation with extremely low pressure loss.
How To Specify
300 - BPE - PRS-D
Model
BPE
Valves
140 www.rainbird.com
Valves
Options (order separately) BPE & BPES 3" Valve Pressure Loss (psi)
•Accommodates field-installed PRS-D pressure regulating module to
ensure optimum sprinkler performance. Regulates up to 100 psi Flow Globe Angle
(6,90 bars).
GPM
•Purple flow control handle for non-potable water applications. 60 6.6 6.8
(BPE-NP-HAN) 80 5.1 5.9
•Accepts latching solenoid for use with Rain Bird battery-operated 100 3.2 3.5
controllers up to 150 psi (10,35 bars). 120 1.8 1.8
140 1.8 2.1
Operating Range 160 2.0 2.1
•Pressure: 20 to 200 psi (1,38 to 13,80 bars) 180 2.2 2.0
200 2.7 2.5
•PRS-D regulates up to 100 psi (6,90 bars)
250 4.0 3.4
•Flow with/without PRS-D: 60 to 300 GPM (13,62 to 68,10 m3⁄h; 300 4.9 4.5
3,78 to 18,90 l/s)
•Water temperature: up to 110°F (43°C)
•Ambient temperature: up to 140°F (60°C)
BPE & BPES 3" Valve Pressure Loss (bars) METRIC
Electrical Specifications Flow Flow Globe Angle
•24 VAC 50/60 Hz (cycles/sec.) solenoid m3⁄h l/s
•Inrush current: 0.41 A (9.84 VA) at 60Hz 14 3,89 0,45 0,47
•Holding current: 0.28 A (6.72 VA) at 60Hz 20 5,56 0,32 0,35
30 8,33 0,11 0,12
•Coil resistance: 28 Ohms, nominal
40 11,11 0,13 0,16
50 13,89 0,17 0,19
Dimensions 60 16,67 0,24 0,26
Height Length Width 68 18,89 0,29 0,32
•300 135⁄8" (34,61 cm) 8" (20,32 cm) 7" (17,78 cm)
Notes
1. Loss values are with flow control fully open.
Models
•300BPE 3" (80/90)
•300BPES 3" (80/90)
BSP threads available; specify when ordering.
Recommendations
1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec.
(2,29 m/s) in order to reduce the effects of water hammer.
Valves
www.rainbird.com 141
Valves
PRS-Dial
Pressure Regulating Module
Features
•Improved spike reduction capabilities reduce water hammer.
•Ergonomic design with snap-tight cover to prevent vandalism.
•Waterproof dial cartridge eliminates fogging and binding.
•Dial cartridge retrofits into all existing PRS-B units.
•Schrader valve connects pressure hose gauge, ordered separately.
•Easy field installation. PRS-Dial threads underneath the solenoid
and adapter.
•Corrosion-resistant glass-filled nylon for rugged performance.
150-PGA-PRS-D 150-PEB-PRS-D 150-PESBR-PRS-D
Operating Range
•Pressure: up to 100 psi (6,90 bars)*
•Regulation: 15 to 100 psi (1,04 to 6,90 bars)
•Accuracy: ±3 psi (±0,21 bar)
•Flow: refer to chart
* While the PRS-Dial unit can withstand pressures up to 200 psi (13,80 bars),
accurate pressure regulation can be maintained only up to 100 psi (6,90 bars).
150-EFB-CP-PRS-D 300-BPE-PRS-D
PRS-D
Valves
142 www.rainbird.com
Valves
Valves
www.rainbird.com 143
Valves
Quick-Coupling Valves
Industrial-strength brass quick-coupling valves for convenient
water access.
Features
Quick-Coupling
Valve Cutaway
•Optional locking cover on models 33DLRC, 44LRC, and 5LRC (use
2049 key to unlock). Metal cover on model 7 only.
•One-piece body design (models 3RC, 5RC, and 7).
•Two-piece body design for easy servicing (models 33DRC, 44LRC,
and 44RC).
•Yellow thermoplastic cover for durability.
Operating Range
•Pressure: 5 to 125 psi (0,35 to 8,63 bars)
•Flow: 10 to 125 GPM (2,27 to 28,38 m3⁄h; 0,63 to 7,88 l/s)
Dimensions
•3RC Height: 41⁄4" (10,8 cm)
•33DRC Height: 43⁄8" (11,1 cm)
•33DLRC Height: 45⁄8" (11,7 cm)
3 RC •44RC Height: 6" (15,2 cm)
•44LRC Height: 6" (15,2 cm)
•5RC Height: 51⁄2" (14,0 cm)
•5LRC Height: 51⁄2" (14,0 cm)
•7 Height: 53⁄4" (14,6 cm)
Models
3
•3RC: ⁄4" (20/27) Rubber Cover, 1-Piece Body
3
• 33DRC: ⁄4" (20/27) Double Track Key Lug, Rubber Cover,
33 DRC 2-Piece Body
• 33DLRC: 3⁄4" (20/27) Double Track Key Lug, Locking Rubber Cover,
2-Piece Body
• 44RC: 1" (26/34) Rubber Cover, 2-Piece Body
• 44LRC: 1" (26/34) Locking Rubber Cover, 2-Piece Body
• 5RC: 1" (26/34) Rubber Cover, 1-Piece Body
• 5LRC: 1" (26/34) Locking Rubber Cover, 1-Piece Body
• 7: 11⁄2" (40/49) Metal Cover, 1-Piece Body
7 • 5RC-BSP: 1" (26/34) Rubber Cover, 1-Piece Body, BSP threaded
• 5LRC-BSP: 1" (26/34) Locking Rubber Cover, 1-Piece Body,
BSP threaded
Note: For non-US applications, it is necessary to specify NPT or BSP thread type.
Valves
144 www.rainbird.com
Valves
Quick-Coupling Valves for Non-Potable Water Quick-Coupling Valves Pressure Loss (psi)
Industrial-strength brass quick-coupling valves for convenient Flow 3RC 33 DRC 44 RC 5NP 7
water access in non-potable systems. 33 DNP 44 NP
3 3
GPM ⁄4" ⁄4" 1" 1" 11⁄2"
Red brass construction for long life and rugged performance. 10 1.8 2.0 - - -
Two-piece body design for easy servicing. 15 4.7 4.3 2.2 - -
20 7.2 7.6 4.4 - -
30 - - 11.5 4.1 -
Features 40 - - - 7.3 -
•Locking purple thermoplastic covers restrict tampering 50 - - - 11.0 1.7
(use 2049 key to unlock). 60 - - - 15.7 2.5
•Strong corrosion-resistant stainless steel spring prevents leakage. 70 - - - 21.5 3.6
80 - - - - 4.9
•Covers marked with “Do Not Drink!” warnings in English
100 - - - - 8.4
and Spanish.
125 - - - - 14.0
Operating Range
•Pressure: 5 to 125 psi (0,35 to 8,63 bars)
Quick-Coupling Valves Pressure Loss (bars) METRIC
•Flow: 10 to 70 GPM (2,27 to 15,89 m3⁄h; 0,63 to 4,41 l/s)
Flow Flow 3RC 33 DRC 44 RC 5NP 7
Dimensions 33 DNP 44 NP
3 3
•33DNP Height: 43⁄8" (11,1 cm) m3⁄h l/s ⁄4" ⁄4" 1" 1" 11⁄2"
•44NP Height: 6" (15,2 cm) 3 0,83 0,25 0,23 - - -
4 1,11 0,42 0,41 0,22 - -
•5NP Height: 51⁄2" (14,0 cm)
5 1,39 - - 0,37 - -
6 1,67 - - 0,57 - -
Models 7 1,94 - - 0,84 0,30 -
3
•33DNP: ⁄4" (20/27) 8 2,22 - - - 0,40 -
•44NP: 1" (26/34) 9 2,50 - - - 0,50 -
•5NP: 1" (26/34 10 2,78 - - - 0,61 -
12 3,33 - - - 0,85 0,13
14 3,89 - - - 1,15 0,18
16 4,44 - - - 1,48 0,25
22 6,11 - - - - 0,72
28 7,78 - - - - 0,97
33-DNP
Valves
www.rainbird.com 145
Valves
VB Series Valve Boxes •Optional stainless steel bolt and clip securely fasten the lid to
Now You Can Judge A Valve Box By Its Cover the body.
•Available lid colors are green, purple (to indicate non-potable water),
tan (for desert soils), and black.
Easily removable knock-outs simplify pipe placement and reduce
installation time.
JUMBO RECTANGULAR SERIES (VB - JMB)
Large top opening area provides unobstructed access to valves.
•Two large center knock-outs accommodate up to 31⁄2" diameter pipe.
Corrugated sides provide strength both before and after knock- (Extension does not have knock-outs.)
outs are removed. •Shovel access slot on the body allows for easy lid removal.
•Bolt hole knock-out in the lid keeps insects out of the box when bolt
Features is not used.
These features apply to the Standard, Jumbo, Super Jumbo, Maxi •Optional stainless steel bolt and clip securely fasten the lid to
Jumbo, and 10" Round Valve Boxes: the body.
•Knock-out retainers align removed knock-outs in place above the •Wrench grip on lid makes it easier to remove the lid.
pipe to help keep dirt out during backfill. •Available lid colors are green, purple (to indicate non-potable water),
•Beveled lid edges help prevent damage to lids from lawn equipment. tan (for desert soils), and black.
•Interlocking bottoms allow boxes to mate securely together bottom-
to-bottom for deep installations. SUPER JUMBO RECTANGULAR SERIES (VB - SPR)
•Lid marking area provides dedicated location for valve •Fourteen knock-outs accommodate up to 31⁄2" diameter pipe.
identification. •Shovel access slots on both ends of the body allow for easy
lid removal.
Additional Features •Wrench grips on lids makes it easier to remove the lid.
STANDARD RECTANGULAR SERIES (VB - STD) •Includes two stainless steel bolts and clips to securely fasten the lid to
•Two large center knock-outs accommodate up to 31⁄2" diameter pipe the body.
and eleven knock-outs accommodate up to 2" diameter pipe. •Available lid colors are green and tan (for desert soils).
(Extensions and shallow boxes do not have knock-outs.)
•Shovel access slot on the body allows for easy lid removal.
•Bolt hole knock-out in the lid keeps insects out of the box when bolt
is not used.
VB-SPR-H
VB-MAX-H
Valves
146 www.rainbird.com
Valves
VB-10RND
VB-6RND
VB-JMB
VB-STD
Valves
www.rainbird.com 147
Valves
VB Series (continued)
Standard 6" box: 20.0" L x 14.75" W x 6.75" H (50,8 cm x SUPER JUMBO RECTANGULAR SERIES
37,5 cm x 17,1 cm) Super jumbo box: 33.1" L x 23.8" W x 15.0" H (84,1 cm x 60,5 cm
•VB - STD - 6B: 6" standard black body only x 38,1 cm)
•VB - STD - 6: 6" standard black body and green lid •VB - SPR - B: Black body only
•VB - STDP - 6: 6" standard black body and purple lid •VB - SPR - L: Green lid
•VB - STDT - 6: 6" standard black body and tan lid •VB - SPRT - L: Tan lid
•VB - SPR - H: Black body and green lid with 2 locking hex bolts
JUMBO RECTANGULAR SERIES •VB - SPRT - H: Black body and tan lid with 2 locking hex bolts
Jumbo box: 26.3" L x 19.8" W x 12.1" H (66,8 cm x 50,3 cm x 30,7 cm)
•VB - JMB: Black body and green lid MAXI JUMBO RECTANGULAR SERIES
•VB - JMBP: Black body and purple lid Maxi jumbo box: 40.3" L x 27.1" W x 18.0" H (102,4 cm x 68,8 cm
•VB - JMBT: Black body and tan lid x 45,7 cm)
•VB - JMBBK: Black body and black lid •VB - MAX - B: Black body only
•VB - JMB - B: Black body only •VB - MAX - L: Green lid
•VB - JMB - L: Green lid •VB - MAXT - L: Tan lid
•VB - JMBP - L: Purple lid •VB - MAX - H: Black body and green lid with 2 locking hex bolts
•VB - JMBT - L: Tan lid •VB - MAXT - H: Black body and tan lid with 2 locking hex bolts
•VB - JMBBK - L: Black lid
•VB - JMB - H: Black body and green lid with locking hex bolt
•VB - JMBP - H: Black body and purple lid with locking hex bolt
•VB - JMBT - H: Black body and tan lid with locking hex bolt
•VB - JMBBK - H: Black body and black lid with locking hex bolt
VB-STD-3EXT
VB-JMB-6EXT
VB-STD-6
Valves
148 www.rainbird.com
Valves
LOCKING SYSTEMS
•VB - LOCK - H: Hex head 3⁄8" x 21⁄4" (1,0 x 5,7 cm) bolt, washer,
and clip
•VB - LOCK - P: Penta head 3⁄8" x 21⁄4" (1,0 x 5,7 cm) bolt, washer,
and clip
Valves
www.rainbird.com 149
Valves
Features
•Tight O-ring seals prevent leaks.
•Oversized internal diameter improves flow through the manifold.
•Use as slip fit with 1" (2,5 cm) pipe or spigot with 11⁄ 4" (3,2 cm) pipe.
•Kit includes 1 slip adapter outlet fitting per valve for connection to
either 3⁄ 4" (1,9 cm) or 1" (2,5 cm) PVC pipe, 1 end cap, and 1 optional
barb fitting to connect manifold to poly pipe (included with -B
systems only). Also includes wire splices.
•Durable schedule 80 construction.
Specifications
•Operating pressure up to 235 psi (16,0 bars) at 73 °F (23 °C)
UVMS-4-DV-S
Models
•UVMS-2-DV-S
•UVMS-2-DVF-S
•UVMS-2-DV-B
•UVMS-2-DVF-B
•UVMS-3-DV-S
•UVMS-3-DVF-S
•UVMS-3-DV-B
•UVMS-3-DVF-B
•UVMS-4-DV-S
•UVMS-4-DVF-S
How To Specify •UVMS-4-DV-B
UVMS - 4 - DV - S •UVMS-4-DVF-B
Number of Fitting
Valves S: Slip
2 B: Barb
3
4
Model Valve
Union Valve DV
Manifold DVF
System
Valves
150 www.rainbird.com
Valves
Features Features
•Automatically drains pipes to prevent freezing damage. •Fast, reliable splicing.
•Plastic perforated cap screens out large particles; dispersion pad •UV resistant black housing is pre-filled with non-toxic lithium grease.
filters out smaller particles.
Specifications
Operating Range •Splices low voltage electrical control wires: 30 V max
•Operating pressure up to 125 psi (8,5 bars) •Fits wires up to
•Flow: 1 GPM (0,23 m3⁄h; 0,06 l/s) maximum rate before sealing 5 #18, #20, or #22 AWG
4 #16 AWG
Specifications 2 #14 AWG
•Average opening pressure when installed vertically: 2.5 psi (0,2 bar)
Model
•Average closing pressure when installed vertically: 5.5 psi (0,4 bar)
•Diameter: 13⁄8" (3,5 cm); Length: 1" (2,5 cm) •SPLICE-1
Models
•16A-FDV: 1⁄2" (15/21)
male threaded inlet
•16A-FDV-075: 3⁄4" (20/27) 16A-FDV
male threaded inlet
SPLICE-1
Valves
www.rainbird.com 151
Valves
Jar Top Valve (JTV) Bonnet Wrench NEW Locking Cover Key
Features Features
•Remove and tighten JTV/JTVF bonnets in hard to reach areas. •Locks and unlocks the optional locking cover on
•Multiple drive options. quick-coupling valves.
• crescent or spanner wrench, channel locks on 1" external flats. •Operates the valve marker compression lock.
• 3⁄8" drive socket wrench receiver. •Compatible with models 33DLRC, 33DNP, 44LRC, 44NP, and 5LRC.
• screwdriver shaft or dowel in 1/2" radial holes.
Model
• by hand.
• 2049 Cover Key
•Compatible with JTV (standard) and JTVF (flow control) models.
•Can remove bonnet with solenoid installed.
Model
•BW-JTV
BW-JTV
2049
SH Series PHG
Hose Swivel Pressure Hose Gauge
Features Features
•Attaches water hose to quick-coupling valve key.
•Monitors valve outlet pressure.
•Swivels up to 360°.
•Quick connect hose fitting is simple to connect and disconnect to
•Allows hose to be pulled in any direction. PRS-D Schrader valve.
•Prevents hose damage.
Specifications
Specifications •0 to 160 psi (0 to 11,04 bars) gauge provides accurate reading of outlet
•SH-0: 3⁄4" (20/27) female pipe thread x 3⁄4" (20/27) male hose thread pressure.
•SH-1: 1" (26/34) female pipe thread x 3⁄4" (20/27) male hose thread •36" (91,4 cm) long, high-
•SH-2: 1" (26/34) female pipe thread x 1" (26/34) male hose thread pressure hose permits easy reading of gauge.
•SH-3: 11⁄2" (40/49) female pipe thread x 1" (26/34) male hose thread
Model
Models •PHG
•SH-0
•SH-1
•SH-2*
•SH-3
SH-0
*Available with BSP threads.
PHG
Valves
152 www.rainbird.com
Valves
Solenoid Adapter
BPE-NP-HAN PEB-NP-HAN PGA-NP-HAN EFB-GB-NP-HAN
63100 Right Choice in Jar Right Choice in ASVF, DV, and PEB Valves
Valve Marker Top Valves Sales Sales Brochure
Brochure Features
Features
•Use with 2" PVC Class 200 pipe Features •Used by contractors when recommending valves in the ASVF, DV, or
to provide easy detection of a •Used by contractors when PEB series to homeowners.
valve. recommending Jar Top Valves •Photos and features to educate prospective customers.
•Bright yellow color allows easy to homeowners. •Size is 81⁄2" wide a 11" high.
visual detection. •Size is 81⁄2" wide a 11" high. •3-hole punched; Packs of 25.
•Metal screw insert allows easy •3-hole punched; Packs of 25. •Contractors order through Rain Bird Rewards:
detection with a metal detector. •Contractors order through rainbird.com/rewards or 1-888-370-1814.
Rain Bird Rewards: •Reference no. D39324.
Model rainbird.com/rewards or
•63100 1-888-370-1814.
•Reference no. D39592A.
63100
Valves
www.rainbird.com 153
Valves
Step 1
Determine actual distance, along wire run, from controller out to
the first valve on a circuit and between each succeeding valve on a
multiple valve circuit (as shown in example below). Example:
(Two watt solenoid, 26.5 volt transformer at 150 psi water pressure
at valves.)
Step 2
Calculate the equivalent circuit length for each valve circuit on the
controller. (See chart on following page)
Step 3
Selecting Common Ground Wire Size: Using the longest equivalent
length calculated above, go to the appropriate valve chart and select a
ground wire and a control wire that are as close to the same size as
possible (the ground wire size should always be equal to or one size
larger than the control wire size.) In the example above, the circuit for
station #3 has the longest equivalent length, 7000 feet. In the chart (for
this example use the high pressure chart for 150 psi water pressure at
the valve and a 26.5 volt transformer) select a wire size combination of
size 14 and 12 wire. Select common ground wire as size 12 wire. Since
one common ground wire shall be used for all valves on the controller,
you have now established the common ground wire size for that
controller as size 12 wire.
Step 4
Sizing Circuit Control Wires: Using the common ground wire size
selected in Step 3 (size 12), proceed to select each control wire
size from the chart using the calculated equivalent length for
each circuit.
Valves
154 www.rainbird.com
Valves
Valves
www.rainbird.com 155
Valves
80 psi (5,5 bars) Water Pressure at Valve 125 psi (8,6 bars) Water Pressure at Valve
Common Control Wire Size Common Control Wire Size
Wire Size 18 16 14 12 Wire Size 18 16 14 12
18 3000 3680 4290 4800 18 1400 1720 2000 2240
16 3680 4700 5850 6840 16 1720 2200 2730 3190
14 4290 5850 7570 9300 14 2000 2730 3530 4340
12 4800 6840 9300 12050 12 2240 3190 4340 5620
100 psi (6,9 bars) Water Pressure at Valve 150 psi (10,4 bars) Water Pressure at Valve
Common Control Wire Size Common Control Wire Size
Wire Size 18 16 14 12 Wire Size 18 16 14 12
18 2300 2820 3290 3680 18 600 730 860 960
16 2820 3660 4490 5240 16 730 950 1170 1370
14 3290 4490 5800 7130 14 860 1170 1510 1860
12 3680 5240 7130 9420 12 960 1370 1860 2410
Controller
Ground
Common Ground Wire
Controller Stations
Valve = 2 A Valve = 2 B
Actual Length 2000 ft Actual Length 1000 ft
Valves
156 www.rainbird.com
Spray Heads
Rotary Nozzles
Controllers
Rotors
Impacts
Valves
Controllers
It's all about reliability, flexibility and ease of use. Central Controls
Rain Bird® controllers have long earned the trust of nearly everybody. Nobody else has
programming that's simpler or easier to understand. Nobody else has a track record of
reliability that even comes close. Nobody else sets the quality standard for surge protection Commercial
Pump Stations
and contamination resistance. Nobody else has more features and options to assure
customer comfort and save you time. And as you know-in this business-time is money.
Landscape Drip/
Xerigation
Install Confidence. ®
®
Install Rain Bird Controllers.
Accessories
Resources
& Training
Reference
Controllers
Controllers
158 www.rainbird.com
Controllers
Major Products
RC-Bi RC-C Ec ESP-TM ESP ESP-LX Plus ESP-MC IM EASY RAIN™ TBOS™
Modular Battery Battery
Operated Operated
Primary Applications Controllers Controllers
Residential • • • • • • • • •
Light Commercial • • • • • • •
Commercial/Industrial
Type of Controller
• • • •
Electromechanical • •
Hybrid • • • • • •
Solid State • •
Indoor Location • • • • • • • •
Outdoor Location
Features
• • • • •
Stations (up to) 12 12 9 8 13 24 40 48 1 6
Programs 1 1 3 2 3 4 4 7 1 3
Station Timing (up to) 60 min 60 min 4 hr* 99 min* 6 hr* 12 hr* 12 hr* 24 hr* 90 min 12 hr
Number of Starts per Program (up to) 23 23 4 3 4 6 8 8 2 8
Surge Protection • • • • • • • •
230VAC Option • • • • • •** • max.
Master Valve/Pump Start • • • • • •****** • •**3
Water Budgeting • • • • •****** •******
Individual Program Shut-Off • • •
Rain Delay • • •
Battery Programmable • • • • • •
Sensor Terminals, Status Indicator & Override
Delay Between Stations (up to)
•9 hr •
9 hr
•
9 hr
•*******
20 min.
Simultaneous Multi-Station Operation • • • •
Cycle+Soak™ • •
Overlapping Programs •**** • •
High Flow Alarm & Shutdown •
Irrigation by Volume •
Irrigation by ET (evapotranspiration) •
Manual On/Off • • • • • • • •
Remote Control Compatible • • •*****
Diagnostic Test (RASTER™) • •
Diagnostic Circuit Breaker • • • • •
Out-of-Valve Box Programming
Submersible (up to)
•3.3 ft (1 m) •
3.3 ft (1 m)
Vandal/Tamper Resistant •
Self-Cleaning Solenoid • •
Low Battery Indicator
Programming Schedule
•
14 Day-of-Week • • •
7 Day-of-Week • • • • • •
2, 3, 5 Fixed Cycle • •
1-7 Variable Cycle • • • •
1-31 Variable Cycle • • •
1-99 Variable Cycle •
Odd/Even Cycle • • • • • •
Odd 31st • • • • •
365-Day Calendar • • • • • •
Event Day Off
Pre-Programmed Cycles 3
• • • • 6
Pre-Programmed Run Times 2 7
Central Control Compatibility
Maxicom 2® and SiteControl Upgradeable
Cabinet
•
Plastic-Indoor • • • • •
Plastic-Outdoor • • • •
Metal-Outdoor •
Stainless Steel Pedestal Option •
Painted Pedestal Option
Accessories
• •
RSD Rain Sensor • • • • • • • •
TBOS Rain Shut-Off Device •
*With water budgeting, timing can be extended (Ec, ESP-TM, ESP, ESP-Modular, ESP-LX+, ESP-MC, IM) **Programmable by station ***Sensor terminals and override switch only ****With program D only
***** Not compatible with Rain Bird remotes ****** Selectable for each program ******* Software override. Up to 12 sensor inputs.
Controllers
www.rainbird.com 159
Controllers
FAC T R E P O RT
Superiorsurge
Superior surgeand
andcontamination
contaminationprotection
protection assures
assures
unrivaledperformance
unrivaled performanceand
andsafeguards
safeguardsyour
yourinvestment.
investment.
Trust that when you install Rain Bird® ESP-MC controllers, you can confidently expect that these
products will be more durable than the competition, will be far more reliable, and will deliver superior
performance year after year. Advanced surge and contamination protection technology safeguards each
unit, providing many times more protection against lightning strikes and environmental contamination
Controllers
160 www.rainbird.com
Controllers
Lightning strikes are one of the biggest enemies of controller • Overlay with membrane switches
products. They generate powerful surges that damage electronic • Rubber boot on the sensor switch
circuitry inside. Lightning strikes are not only very powerful but often • Battery compartment with door
occur multiple times in rapid succession. Each surge further weakens • Strategically positioned gaskets
circuitry. As the following charts indicate, the Rain Bird® ESP-MC
controller provides many times the protection against powerful single Going Head-to-Head
and multiple surges created by lightning when compared to the with the Competition.
competition.
Comparison of Rain Bird ESP-MC and Irritrol MC Plus
circuitry after the water infiltration test:
Going Head-to-Head with
Note the corrosion
the Competition. formed on the
competitor model
To measure the effectiveness of Rain Bird’s Advanced Surge compared to the
Protection, side-by-side comparisons with the competition were clean Rain Bird
ESP-MC circuitry.
conducted. The surges generated during the test are similar to surges
affecting controller products during nearby lightning strikes. The clear
advantage of Advanced Surge Protection can be seen in the following Irritrol MC Plus Rain Bird ESP-MC
charts.* The Rain Bird ESP-MC controller sustained no damage after
single and multiple surges of up to 20,000 Volts were applied, unlike To measure the effectiveness of Rain Bird’s ESP-MC
the two competitor controller products that were permanently Contamination Resistant Design, side-by-side water
damaged after surges of less than 2,500 Volts were applied. infiltration tests were conducted. The doors were removed
from two competitor controller products and the Rain Bird
ESP-MC controller. The controllers were then subjected to a
Station-to-Valve high-pressure water stream inside a closed environment. A
Common: Single Surge* spray head—operating at 60 psi—was used as the water
20000 20000† Note: Single surge applied source.
between a station output
15000 terminal and the valve The following chart reflects the results of the water infiltration
VOLTS
common terminal. This is test. The Rain Bird ESP-MC with its Contamination Resistant
10000 the most common source
of controller failures Design dramatically outperformed the competition. The
5000 during lightning strikes. Rain Bird ESP-MC sustained no permanent damage during
2450
1200 the four-hour water infiltration test, unlike the two competitor
0
Hunter Irritrol Rain Bird controller products that were permanently damaged after just
ICC MC Plus ESP-MC a couple of minutes.
Station-to-Station:
Single Surge* 300
20000 20000 †
Note: Single surge applied
between two station output
15000
terminals.
VOLTS
240
10000 Functional Failure
Serious malfunction
occurred, such as LCD
5000 180 display blank, station
MINUTES
* Results show the highest voltage level without any adverse effect on controller operation.Voltages shown are the voltages generated by the testing equipment. No external grounding was used during the test.
†
The maximum generated voltage was 20,000V due to the testing equipment operational limits. The ESP-MC is built to withstand higher voltage levels than 20,000V. It is not built to withstand a direct lightning strike.
All tests conducted at Rain Bird’s Controls Manufacturing Division in San Diego, CA. Test results reflect a comparison of Rain Bird products with those of its principal competitors manufactured
in the second quarter of 2003.
Controllers
www.rainbird.com 161
Controllers
FAC T R E P O RT
Install Confidence.
Install Rain Bird®®
ESP Modular Controllers.
Easily upgrades from 4 to 13 Installation is a snap with the Improves upon Rain Bird’s already
stations with the addition of roomy cabinet and horizontal easy-to-use ESP style
3-station modules at installation terminal strips of programming
or in the future
Controllers
162 www.rainbird.com
Controllers
The proof
The proof is
is in
in the
the Rain Bird
performance.
performance. Exclusive Features
Only Rain Bird ESP Modular
Reliability
Rain Bird's quality components result
2.7 times more surge protection
controllers have these features:
Enhanced Diagnostics
Ease of use for customers
Rain Bird's exclusive ESP-style of
Feedback™
Automatically alerts you with a message
programming is so simple to set-up, you'll on the LCD and warning light to station
be on your next job faster than ever. shorts, programming errors and sensor
activation.
The ESP Modular features a durable
switch for easy, error-free program
selection.
The ESP Modular's larger LCD display
and solid dial make programming easier
for both contractors and homeowners.
Note: Tests conducted at Rain Bird’s Controls Manufacturing Division in San Diego, CA. Test results
reflect a comparison of Rain Bird products with those of its principal competitors purchased the second
quarter of 2004.
Controllers
www.rainbird.com 163
Controllers
FAC T R E P O RT
Install Confidence.
Install Rain Bird®®
Ec Controllers.
flawless installation. And a quick reference guide and interrupting the Rain Bird Ec Irritrol® SlimDial™ Hunter® EC
programming chart put all the answers at the fingertips of you common wire circuit. Note: Single surge applied between a station output terminal
and your customer. Look at the chart below to see how and the valve common terminal. This is the most common
Rain Bird stacks up against the Hunter® EC and Irritrol® source of controller failure during lightning strikes.
SlimDial™ when it comes to other controller features.
Station-to-Station: Single Surge*
6000
Controllers
164 www.rainbird.com
Controllers
FAC T R E P O RT
Install Confidence.
Install Rain Bird®®
ESP-TM Controllers.
1000
Extra Simple Programming (ESP) 800
0
The name says it all. As a hybrid with entry-level pricing, Rain Bird ESP-TM Hunter® SRC Toro® GreenKeeper®
the Rain Bird® ESP-TM maintains proven programming features of
the ESP family of controllers: Note: Single surge applied between a station output terminal
• Programmable day-of-week watering schedule and the valve common terminal. This is the most common
• Independent dual programming source of controller failure during lightning strikes.
• Easy-to-understand a.m./p.m. clock
• Large, self-prompting LCD Station-to-Station: Single Surge*
• Manual start/advance capability for
6000
semiautomatic operation
• 2-, 3- or 5-day fixed or 7-day variable cycles
5000
4000
Ease of Installation
Rain Bird designed the ESP-TM with key features
that minimize setup time and provide ease of installation: 2000
• “Flip strip” terminal permits valve wire hookup
without screws 1000
800
• Wiring skirt for clean, professional installation 0
Rain Bird ESP-TM Hunter® SRC Toro® GreenKeeper®
• User-friendly interface with solid dial clicks and
a large, readable LCD Note: Single surge applied between two station output terminals.
• Mounting templates for flawless fit
• Quick reference guide and programming chart * Results show the highest voltage level without any adverse effect on
controller operation for 20 hits. Voltages shown are voltages generated by
with the answers you need
the testing equipment. No external grounding was used during the test.
• Layered unit construction allows for easy access
to wiring post installation The Rain Bird ESP-TM is not built to withstand a direct lightning strike.
All tests conducted at Rain Bird’s Controls Manufacturing Division.
Test results reflect a comparison of Rain Bird products with those of its
principal competitors produced in the first half of 2005.
Controllers
www.rainbird.com 165
Controllers
Operating Specifications
•RC-4Bi: Station timing: 3-60 minutes (in 1-minute increments)
•RC-7Bi: Station timing: 3-60 minutes (in 1-minute increments)
•RC-1260Bi: Station timing: 6-60 minutes (in 2-minute increments)
•Automatic starts: 1 to 23 per day
•Programming schedule: 14-day calendar dial for every-day,
every-other-day, and other pattern starts for a 2-week period
RC-7Bi
Controllers
166 www.rainbird.com
Controllers
Operating Specifications
•RC-7C: Station timing: 3-30 minutes (in 1-minute increments)
•RC-1260C: Station timing: 6-60 minutes (in 2-minute increments)
•Automatic starts: 1 to 23 per day
•Programming schedule: 14-day calendar dial for every-day,
every-other-day, and other pattern starts for a 2-week period
RC-7C
Controllers
www.rainbird.com 167
Controllers
Compact design with easy to follow installation, programming and Electrical Specifications
operation. •Input required: 120 VAC ± 10%, 60 Hz (230 VAC international models
available)
Features •Output 24 VAC @ 0.65A
•English, Spanish and French manual. •Valve capacity: One 24 VAC, 7VA solenoid valve per station plus a
master valve
•Test Program (1-10 min. all stations) for system operational testing.
•Terminal strip capacity: accepts #20, #18, or #16 AWG
•Battery backup for memory and time protection, in case of power
(0,813 mm, 1,22 mm, or 1,63 mm) size valve wire
outage (battery included).
•Default program in case a power outage outlasts the memory
Dimensions
protection (The default program automatically clears itself when the
controller is reprogrammed). •Width: 61⁄2" (16,5 cm)
•Flashing LCD screen (in AUTO setting) to indicate operation under •Height:55⁄8" (14,2 cm)
default program. •Depth: 15⁄8" (4,0 cm)
•Electrical surge protection (input) for reliability.
•Diagnostic circuit breaker without a fuse identifies a station with Models
valve or wire fault and continues to water operable stations. •E-4c: 4 station, indoor
•Three programs (A, B, and C) with independent cycles allow mixed •E-6c: 6 station, indoor
irrigation applications. •E-9c: 9 station, indoor
•365-day calendar for ODD or EVEN day watering or
ODD-with-31st-of-the-month-off selection per program
(adjusts for leap-year).
•Repeating day cycles, allow irrigation every 1, 2, 3, 4-days, etc.
up through 7. (In the 7-day weekly cycle any day can be set ON
or OFF as a watering day).
•Manual “clear” function allows manual erasure of all programs.
•Auto-sensing a.m./p.m. or 24-hour-format time display mode.
•Manual station and cycle option allows you to spot water when
needed.
•UL, cUL listed; CE, C-Tick approved.
E-6C
Controllers
168 www.rainbird.com
Controllers
Operating Specifications
•Station timing: 0-99 minutes (in 1-minute increments); 0-198
minutes with water budgeting
•Automatic starts: 3 per day for each program (6 per day when using
dual program capability)
•Programming schedule: 2-, 3- or 5-day fixed cycle or 7-day
variable cycle
•Water budgeting: 10-200% in 10% increments
ESP-6TM
Controllers
www.rainbird.com 169
Controllers
ESP Modular Series NEW •Master valve/pump start circuit programmable by station allows
4, 7, 10, 13 Stations operation of connected pump as needed.
Indoor or Outdoor for Residential and Light Commercial Use NEW •Programmable delay between station allows additional time between
zones for water well recovery or slow closing valves.
Modularity: Start with the 4-station base controller and easily •365-day calendar with leap year intelligence ensures accurate
expand to 13. Minimize inventory; always keep the right station Odd/Even day watering.
count on hand. •Non-volatile memory maintains the irrigation schedule indefinitely
during a power outage.
Quality: Built-in reliability; designed with durable parts, superior NEW •5-year lithium battery maintains the time and date for a cumulative
surge protection and high temperature tolerance. life of 5 years during power outages.
Easy to use ESP-style programming: So simple to set up, time •Programmable day off allows the user to set any day of the week as a
tested and homeowner approved; you’ll be on to the next job faster non-watering day in any program or schedule, making it easy to
than ever. comply with requirements such as weekly lawn care, maintenance or
watering restrictions.
•Global seasonal adjust (0-200%) allows the user to alter the run time
Features
of all the valves in every program.
•Easily upgrades from a 4 station base model to 13 stations with the
•Dedicated sensor terminals allow the user to easily connect a
addition of 3-station modules at installation or in the future.
sensor to the controller for maximum water efficiency. A light (LED)
•Hot-swappable modules can be installed while the controller is in and a message on the LCD indicates when a sensor is active.
operation and in any position.
•Sensor bypass switch allows the user to override an active sensor.
•Contractor Default™ Program allows the contractor to save his own
•Fuseless, diagnostic circuit breaker identifies a station with valve or
default program and retrieve it with the push of a button. Easily
wiring problems and continues to water operable stations.
reload a schedule that has been altered by a homeowner or replace a
temporary schedule for new seed or sod . •Valve Test Terminal allows the installer to test the valve wires during
installation to determine the valve that each wire is connected to.
•Enhanced Diagnostic Feedback™ alerts the user to conditions when
watering is suspended due to an activated sensor, shorted stations or •Spacious heavy-duty cabinet with internal junction box provides lots
programming errors with a warning light and message on the LCD. of room for wiring and eliminates the need to purchase an external j-
box for a clean and professional looking installation. Outdoor model
•Auxiliary Station™ (Station 13) can be set to bypass an active sensor to
comes with key-locking cabinet.
allow watering even if the other stations are disabled or can be set as
a normal station. Ideal for covered patio watering or non-irrigation
systems such as landscape lighting or fountains.
ESP Modular
Controllers
170 www.rainbird.com
Controllers
Operating Specifications
•Number of programs: 3 independent
•Automatic Starts: 4 per program, 12 total
•Station timing: 0 to 6 hours for all stations
•Independent programming schedules:
- Custom (water by day of the week)
- Odd (water on odd days of the month except on the 31st and
February 29th if a leap year)
- Even (water on even days of the month)
- Cyclical (1-31 days: water from every other day to once every
31 days)
Electrical Specifications
•Input required: 120 VAC ± 20%, 60Hz / 230VAC ± 20%, 50Hz / 240VAC
± 20%, 50Hz
•Output: 25.5 VAC 1A
•Surge Protection: Primary input side has 2 built-in MOVs (metal
oxide varistor) to protect circuitry. Output side has 2 built in MOVs
for each valve station
•Power back-up: Lithium coin-cell battery maintains time and date
while non-volatile memory maintains the schedule
•Multi-valve station capacity: Up to two 24 VAC, 7VA solenoid valves
per station plus a master valve
Dimensions
•Width: 10.7" (27,2 cm)
•Height: 7.7" (19,5 cm)
•Depth: 4.4" (11,2 cm)
Models
•ESP-4Mi: 4 station controller indoor model
•ESP-4M: 4 station controller outdoor model*
•ESP-SM3: 3 station module
*Available in 120VAC, 230VAC and 240VAC models
Controllers
www.rainbird.com 171
Controllers
Features
•Four independent programs (A-, B-, C-, and D-drip), with six start
times each, allow mixed irrigation applications in a single controller.
•365-day calendar with leap year intelligence for one-time date and
time setting.
•Non-volatile program memory maintains user’s program during
a power outage independent of the battery backup.
•Removable, battery-programmable panel for the convenience of
both programming instruction and programming prior to installation.
•Four cycle modes (CUSTOM, CYCLICAL, ODD, or EVEN) selectable
for each program for maximum flexibility.
•Event-Day-Off option to set any day of the month as a non-watering
day for all programs accommodates special occasions and special
watering ordinances (with permanent off option for 31st day of the
month).
•Programmable Delay-Between-Stations (0 seconds to 9 hours)
provides time for water well recovery or time for slow-closing valves to
turn off completely.
•Start time stacking prevents hydraulic overload.
•Variable test program for system operational testing.
•Water budgeting by program from 0 to 300% in 1% increments makes
seasonal adjustments quick and easy.
•Programmable rain delay enables system to stay off for specified
period with an auto-restart.
•Sensor inputs and override switch with LED indicate when irrigation
is suspended.
ESP-16LX Plus •Master valve/pump start circuit, programmable by station, for optimal
irrigation control.
•D-drip program can run simultaneously with program A, B or C to
maximize hydraulic capacity and minimize watering time.
Controllers
172 www.rainbird.com
Controllers
•Diagnostic circuit breaker and LED fault indicator identify electrical Dimensions
shorts, skip shorted stations, and continue irrigation cycle. •Width: 91⁄2" (24,1 cm)
•Battery recharging circuit maintains fully charged Ni-Cad backup •Height: 101⁄4" (26 cm)
battery (included) to keep current time and date during a power
•Depth: 43⁄8" (11,1 cm)
outage.
•Heavy-duty 1.25A external, plug-in style transformer on the Models
ESP-LXi Plus indoor version provides convenient installation.
•ESP-6LX Plus: 6 stations, indoor/outdoor*
•Includes easy-to-mount, heavy-duty plastic cabinet with key-lockable
door and swing-out, quick release face panel, as well as all internal •ESP-8LX Plus: 8 stations, indoor/outdoor*
wiring (no junction box needed), for clean-looking, •ESP-12LX Plus: 12 stations, indoor/outdoor*
professional installation. •ESP-16LX Plus: 16 stations, indoor/outdoor*
•UL and cUL listed; CE, and C-Tick approved. •ESP-20LX Plus: 20 stations, indoor/outdoor*
•Special Fuse Circuitry detects and displays when a fuse has blown. •ESP-24LX Plus: 24 stations, indoor/outdoor*
•Interactive programming guide shipping with every unit on a CD •ESP-8LXi Plus: 8 stations, indoor
makes this controller easy to program and understand. •ESP-12LXi Plus: 12 stations, indoor
•ESP-16LXi Plus: 16 stations, indoor
Operating Specifications * Also available in 230VAC
•Station timing: 0 to 12 hours for all stations (0 to 16 hours with water
budgeting); 0 to 120 minutes selectable in 1-minute incre-ments;
above 120 minutes selectable in 10-minute increments
•Automatic starts: 6 starts per day for each program, available
on the quarter hour (total of 24 start times)
•Independent program schedule options:
• ODD day watering (per program)
• EVEN day watering (per program)
• CYCLICAL (1 to 31 days, variable per program)
• CUSTOM (weekly schedule variable per program)
Electrical Specifications
•Input required: 117VAC ± 10%, 60Hz (International models
230VAC ± 10%, 50/60Hz)
•Output: 26.5VAC, 1.5A
•Diagnostic circuit breaker skips and indicates stations with
overloaded circuits and continues to run operable stations
•Overload, backup fuse: 1.5A SLO-BLO
•Battery backup: 9V Ni-Cad rechargeable battery (included) for
programming under battery power and maintaining current time
and date during power outages
•Station Capacity: Up to two 24VAC, 7VA solenoid valves per station
plus a master valve or pump start relay
•Terminal strips for up to #12UF wire
•Electrical surge protection: Primary input side has built-in MOV
(metal oxide varistor) to protect microcircuitry; output side has
two built-in MOVs and one inductor for each valve station
Controllers
www.rainbird.com 173
Controllers
ESP-MC Series
8, 12, 16, 24, 28, 32, 36, 40 Stations
Outdoor controller for commercial use.
Features
•12-hour watering duration for any or all stations to aid in drip
compatibility.
•Four independent programs, with eight start times each, allow mixed
irrigation applications in a single controller.
ESP-MC
•Two master valve/pump start terminals, one programmable by
station, to provide better irrigation control.
•All programs can overlap to maximize hydraulic efficiency and
minimize watering time.
•365-day calendar with leap year intelligence for one-time date
and time setting.
•Event-Day-Off option to set any day of the month as a non-watering
day for all programs.
•Programmable rain delay enables system to stay off for up to 99 days
with auto-restart.
•Upgradeable to Maxicom2® and SiteControl satellite.
•Independent day cycle by program.
•Water budget by program provides adjustments from 0 to 300%
in 1% increments (up to a maximum run time of 16 hours).
•Rain Bird’s exclusive Cycle+Soak™ by station allows the total
station run time to be split into usable cycles, minimizing puddling
and runoff.
•Programmable Delay-Between-Stations provides time for
water well recovery, or time for slow-closing valves to turn
off completely.
•Manual watering by station or program.
ESP-MC-SS
•Sensor inputs and override switch with LED to indicate when
irrigation is suspended by the sensor.
•Non-volatile memory maintains the irrigation schedule for up to 100
years during a power outage.
•Lithium battery maintains the time and date for over 10 years during
a power outage.
•Diagnostic circuit breaker identifies electrical shorts, provides
a “FAULT” message on the LCD screen, skips shorted stations,
and continues irrigation cycle.
Controllers
174 www.rainbird.com
Controllers
•Mounting plate and mounting bracket provide fast, secure, vandal- Dimensions
resistant installation. Steel Wall-mount
•Quick-connect terminal strip for fast installation. •Width: 115⁄16" (28,7 cm)
•Universal remote ready: includes pre-installed connectors •Height: 111⁄2" (29,2 cm)
for addition of remote products.
•Depth: 61⁄2" (16,5 cm)
•Heavy-duty transformer for simultaneous operation of up to nine
24VAC, 7VA solenoids.
Stainless Steel Pedestal
•Removable, battery-programmable front panel for the
convenience of both programming instruction and programming •Width: 111⁄2" (29,2 cm)
prior to installation. •Height: 30" (75 cm)
•Available in 2 enclosures: •Depth: 111⁄2" (29,2 cm)
• Powder coated wall-mount metal cabinet.
• Stainless Steel Pedestal.
Optional Features
•Pedestal Mount (PED-DD16)
Operating Specifications
•Station timing: A, B, C, D - 0 to 2 hours in 1-minute increments;
Models
- 2 to 12 hours in 10-minute increments •ESP-8MC: 8 stations
•Automatic starts: 32 starts total, eight per program per day •ESP-12MC: 12 stations
•Programming schedule: •ESP-16MC: 16 stations
• ODD day watering (per program) •ESP-24MC: 24 stations
• EVEN day watering (per program) •ESP-28MC: 28 stations
• CYCLICAL (1 to 99 days, variable per program) •ESP-32MC: 32 stations
• CUSTOM (day-of-the-week by program) •ESP-36MC: 36 stations
•Test program: Variable 1 to 99 minutes •ESP-40MC: 40 stations
Note: All models also available in 50Hz
•Rain Delay: Programmable 1 to 99 days
Note: All models also available in a stainless steel (-SS) pedestal, except for
international 230 VAC models
Electrical Specifications
•Input required: 117VAC ± 10%, 60Hz
(International models: 230VAC ± 10%, 50Hz)
•Output: 26.5VAC, 2.5A
•Station load capacity: Up to two 24VAC, 7VA solenoid valves
per station plus a master valve or pump start relay
•Diagnostic circuit breaker skips and indicates stations with
overloaded circuits
•Power supply overload, backup fuse: 3.0 Amp SLO-BLO
•Battery backup: 9VDC, Ni-Cad rechargeable for programming
under battery power and for maintaining active program-
in-progress during a power outage
•Heavy-duty electrical surge protection for both input power
and field outputs
•UL Listed; CSA, CE, C-Tick approved
Controllers
www.rainbird.com 175
Controllers
User-Friendly Programming
•Large 15 line by 53 character backlit LCD display.
•Graphics make it simple to view calendars and monitor station
activity.
•Projected schedule shows what stations will run and when.
•Easy-to-read table shows what happens when changes are made.
•Run times programmed in mm:ss or hh:mm.
•Convenient copy and paste command.
•Operator-selectable languages: English, Spanish and French.
Operating Specifications
•Simultaneous operation of up to eight stations plus three master
valves
IM •Three master valve terminals are programmable by station
•Up to 12 sensor inputs, pulse or switched sensors, which can be
assigned to cancel or interrupt irrigation by station
•Test programs for each station as well as recording the water flows
and electrical current draw (Amps)
•Pause and resume operations for use during maintenance
•Choice of resuming programs in progress or where interrupted
Controllers
176 www.rainbird.com
Controllers
Dimensions
The Rain Bird IM is available with up to 48 stations and 12 sensors in
one compact cabinet.
•Wall-mount cabinet
• Width: 153⁄4" (40,0 cm);
• Height: 17" (43,2 cm)
• Depth: 83⁄8" (21,3 cm)
Models
•IM-12
•IM-28
•IM-36
•IM-48
Note: Future upgrades will plug into the existing architecture.
Controllers
www.rainbird.com 177
Controllers
EASY RAIN™ •Calendar (Cycles): Single cycle every 24 hours (1X 24h); Single cycle
For Residential and Light Commercial Use every 48 hours (1X 48h); Single cycle every 72 hours (1X 72h); Double
cycle every 24 hours (2X 24h); Double cycle every 48 hours (2X 48h);
Double cycle every 72 hours (2X 72h)
Water proof (IP-68 rated), submersible to 3.3 feet (1 meter).
Note: Double cycle equals full run time, 4-hour soak, full run time again
Quick, cost-effective irrigation controller solution for watering •Run times: 2, 5, 10, 15, 30, 60, or 90 minutes
power-restricted or isolated sites. Also ideal for highway medians, Note: Under double cycle (2X) calendar, total watering time is twice the run time
for a maximum of 180 minutes
drip zones, greenhouses, or for provisional operation, test and
repair of AC powered irrigation systems when power is not •Soak time: 4 hours (between double cycles (2x) only)
available. •Default program: The controller will irrigate for the selected run time
indicated by the programming dial every day starting 8 hours after
Multiple scheduling options even allow a soak time between battery installation if the controller has been programmed
double cycles. incorrectly. The default program will only run if the programming
dial is positioned on a run time
Features •Maximum operating pressure: 150 psi (10 bar)
•Operates with any top-grade 9V alkaline battery for applications with •Battery life: One year with top-grade alkaline battery (battery not
no AC power supply (Duracell™, Energizer™, etc.) included)
•Factory pre-wired with a DC latching solenoid in a plastic adapter •Three year warranty
which hand-screws onto most Rain Bird valves for quick and easy
out-of-the box installation. Electrical Characteristics
•Program module mounts directly on solenoid adapter for easy •Power: 9V alkaline battery (international 6AM6 standard or European
installation. 6LR61 standard, for example: Duracell™, Energizer™, etc.)
•Pre-wired cable, over 20 inches (50,8 cm) long, allows programming
outside of valve box. Dimensions
•One programming knob to access all functions for •Height: 51⁄8" (12,8cm)
programming ease. •Width: 21⁄6" (5,5 cm)
•Choice of 6 calendars and cycles for scheduling flexibility. •Depth: 33⁄4" (9,5 cm)
•Choice of 7 run times for diverse watering requirements.
•Soak time (4 hours) between the double cycles (2X) for special terrain Model
and applications. •EASY RAIN
•Easy-to-use manual start/stop function.
•Standby function prevents unnecessary irrigation during rainy
weather.
•Resin-encased electronic components, silicone-filled cavities,
and waterproof battery compartment with screw-on cap allow
operation even in flooded valve boxes.
•Incorporates TBOS™ (formerly UNIK™) technology for field-proven
reliability.
•Handy “Cycle Indicator” reminds you of the calendar/cycle selected
in the controller’s program.
Operating Specifications
EASY RAIN
•Valve capacity: 1
•Valve compatibility: Rain Bird DV, DVF, JTV, JTVF, ASVF, PGA, PEB,
PESB, GB, EFB-CP, BPE and BPES valves
•Start time: Selectable from 0, 2, 4, 6, 8, 10, or 12 hours after battery
installation
Controllers
178 www.rainbird.com
Controllers
Controllers
www.rainbird.com 179
Controllers
TBOS (continued)
TBOS Potted Latching Solenoid TBOS™ Rain Shut-Off Device
•Two 18 gauge (0,75 mm2) wires are supplied: 23.6 inches
(60 cm) long. Features
•Fits Rain Bird valves: DV, DVF, ASVF, PGA, PEB, PESB, GB, EFB-CP, •Measures the moisture level in the site area where it is installed in
BPE and BPES series. sand outside the irrigated area.
•150 psi (10 bar) maximum operating pressure. •Prevents irrigation as soon as the area has sufficient water to meet
•Dimensions: 13⁄8" x 23⁄8" x 11⁄2" (4,0 cm x 6,0 cm x 4,2 cm). plant needs.
•Does not interrupt irrigation taking place, but subsequent program
TBOS Solenoid Adapters starts are prevented.
•Easy to install. •Automatic return to normal watering schedule when the soil
•Black adapter for plastic valves allows the TBOS potted latching moisture level decreases as a result of natural evaporation.
solenoid to be used with selected Irritrol (Hardie/Richel) and •Comes with an easy-to-install ON/OFF switch to allow deactivation
Buckner valves. of the rain shut-off device during system maintenance.
•Brown adapter for brass valves allows the TBOS potted latching •ON/OFF switch slides onto the mounting bracket on top of the
solenoid to be used with selected Champion and Superior valve TBOS Control Module.
actuators.
Operating Specifications
Models •Valve compatibility: operates with valves equipped with the
•TBOSFTUS: Field Transmitter TBOS Latching Solenoid
•TBOS1CMUS: 1-Station Control Module •Controller compatibility: operates with TBOS and UNIK™ Control
•TBOS2CMUS: 2-Station Control Module Modules
•TBOS4CMUS: 4-Station Control Module •Must be installed outside the irrigated area or in the last
irrigated zone
•TBOS6CMUS: 6-Station Control Module
•TBOSPSOL: Potted Latching Solenoid Dimensions
•TBOSADAPP: Solenoid Adapter for plastic valves •Width: 31⁄7" x 17⁄9" x 14⁄5" (8,0 x 4,5 x 4,6 cm)
•TBOSADAPB: Solenoid Adapter for brass valves
Model
•TBOSRAINSO: Rain Shut-Off Device
Controllers
180 www.rainbird.com
Controllers
Features Features
•Quick installation on new or existing job sites without messy wires •Multiple rainfall settings from 1⁄8" to 3⁄4" (5-20 mm) are quick and easy
saves time and labor. to adjust with just the twist of a dial.
•Gradually adjustable rainfall setting helps to maximize water savings. •Adjustable vent ring helps control drying time.
•Durable construction and rugged design for long life in severe •High-grade, UV-resistant polymer body resists the elements.
weather conditions. •Choose between rugged aluminum 5" bracket version (RSD-BEx) or
•Patented Test Mode to check the wireless link with confidence and conduit version (RSD-CEx) for a clean and professional look.
prevent installation mistakes. •25 feet (7,6 m) of UV resistant extension wire offers an easy
•Self diagnostic to keep customers informed about product operation. connection to irrigation controllers.
•Automatic recovery after power failures to reduce site visits to reset •UL and cUL listed; CE approved.
the sensor. •Five-year “No Hassle” warranty.
•Regular updates from the sensor several times a day to keep the
controller in sync with the sensor. Specifications
•Rigid aluminum bracket with flexible mounting options for quick •Works with all popular 24 VAC controllers and 24 VAC pump start
installation on walls, fences, eve of roof or rain gutters. relays.
•One sensor can send rain status to several receivers to realize •Suitable to switch up to ten 24 VAC, 7 VA solenoid valves per station,
additional cost savings. plus one master valve.
•Wire: 25' (7,6 m) of 20 AWG two-conductor extension wire.
Specifications
•Short lead for normally open (N.O.) installations.
•Gradual rainfall setting adjustment from 1⁄8" to 3⁄4" (3-20mm). Rainfall
sensing element: hydroscopic disks Dimensions
•Vent ring to adjust rain delay •Overall Length: 6.5" (16,5 cm); Overall Height: 5.4" (15,7 cm)
•Communication distance: up to 300 feet (91.4m) line-of-sight •Bracket hole pattern (RSD-BEx model): 1.25" (3,2 cm)
•Configured for Normally Closed and Normally Open wiring
•Transmitter power: Two (2) 3V CR2032 batteries; Battery life 5 years Models
(typical) •RSD-BEx: rain sensor with aluminum bracket.
•Receiver power: 20 VAC - 28 VAC, 100mA. Works with majority of 24 •RSD-CEx: rain sensor conduit mount.
VAC controllers
•Temperature sensor trips at 37° F ± 1° F (3° C) - Wireless Rain/Freeze
Sensor only
•UV- and fade-resistance plastic and receiver wiring
•UL listed, FCC/CE/C-tik approved
•Three-year warranty
Models
•WRSC: Wireless Rain Sensor Combo
(includes 1 Receiver and 1 Rain Sensor
Transmitter)
•WRFSC: Wireless Rain/Freeze Sensor
Combo (includes 1 Receiver and
1 Rain/Freeze Sensor Transmitter)
•WRST: Wireless Rain Sensor Transmitter
•WRFST: Wireless Rain/Freeze
Sensor Transmitter RSD-BEx
WRFC
•WSR: Wireless Rain Sensor Receiver
(the same Receiver is used for both
Wireless Rain/Freeze and Wireless
Rain Sensors)
Controllers
www.rainbird.com 181
Controllers
Features Features
•Adjustable stainless steel sensing probes offer the flexibility of •Saves water and prevents over-irrigation during and between rains, in
triggering the rain shutoff with as little as 1⁄8" (3,2 mm) of one or multiple zones.
precipitation. •Sixteen user-selected moisture set points to setup the sensor in any
•Water in the rain collector pan evaporates faster than soil moisture to type of soil.
permit watering if required. •Resistant-to-corrosion non-metallic moisture-sensing probe.
•Electronic design eliminates micro switches and water absorbing •Intuitive light indicator shows when soil reaches selected moisture
disks which may rust and/or wear out. level and sensor is activated.
•UV resistant plastic construction increases operating life in harsh •Integrated Bypass Switch to override the sensor during irrigation
environments. system maintenance.
•Works with almost all 24 VAC controllers for maximum versatility. •Durable, UV resistant, NEMA 3R rain-proof outdoor cabinet.
•Controls watering in just one or multiple zones.
Specifications
•Input required: connects to valve common wire. Specifications
•Fuse: 3 A. •Operational voltage: 20 VAC - 28 VAC.
•Collector pan can be removed for cleaning. •Controls up to three 24 VAC solenoid valves per station, plus one
•Multi-valve capacity: Up to three 24 VAC solenoid valves per station. master valve.
•Not recommended for use with direct acting (non-flow switch) pump •Probe can be located up to 1000 ft away from the controller using 16
start relays. AWG wire to extend the leads.
•Height: 63⁄8" (16,2 cm); Width: 43⁄4" (12,1 cm); Depth: 3" (7,6 cm).
Dimensions
•Length: 8" maximum (20,3 cm) Models
•Height 4" maximum (10,2 cm) •MS-100: Moisture Sensor
•Width: 21⁄2" maximum (6,4 cm)
Model
•Rain Check
Controllers
182 www.rainbird.com
Controllers
Specifications
•RELAY-100:
• Coil Operating Voltage: 24 VAC
• Contact Rating:
1 HP @ 110 VAC
1.5 HP @ 240 VAC
20 amps at 240 VAC MS-100
Model
•PTS
CB-C
PTS
PIGTAIL
Controllers
www.rainbird.com 183
Controllers
PED-DD16 PED-RCC
Pedestal for ESP-MC, ESP-SAT, and CCU in metal cabinets Pedestal for RC-4C, RC-7C, and RC-1260C
Features Features
•Includes all necessary mounting bolts, nuts, and washers. •Includes all necessary mounting hardware.
Specifications Specifications
•Material: Epoxy-painted steel •Material: Epoxy-painted steel
•Field wiring connection: In controller •Field wiring connection: In controller
Dimensions Dimension
•Height: 231⁄2" (59,7 cm) •Height: 24" (60,9 cm)
•Width: 101⁄2" (26,7 cm)
•Depth: 5" (12,7 cm) Model
•PED-RCC
Model
•PED-DD16
Right Choice in ESP Right Choice in ESP-LX Right Choice in Right Choice in RSD
Modular Controllers Plus Controllers Sales ESP-TM Controllers Rain Sensors Sales
Sales Brochure Brochure Sales Brochure Brochure
Features Features Features Features
•Used by contractors when •Used by contractors when •Used by contractors when •Used by contractors when
recommending ESP Modular recommending ESP-LX Plus recommending ESP-TM recommending RSD Rain
Controllers to homeowners. Controllers to homeowners. Controllers to homeowners. Sensors to homeowners.
•Size is 81⁄2" wide a 11" high. •Size is 81⁄2" wide a 11" high. •Size is 81⁄2" wide a 11" high. •Size is 81⁄2" wide a 11" high.
•3-hole punched; Packs of 50. •3-hole punched; Packs of 50. •3-hole punched; Packs of 50. •3-hole punched; Packs of 50.
•Contractors order through •Contractors order through •Contractors order through •Contractors order through
Rain Bird Rewards: Rain Bird Rewards: Rain Bird Rewards: Rain Bird Rewards:
rainbird.com/rewards or rainbird.com/rewards or rainbird.com/rewards or rainbird.com/rewards or
1-888-370-1814. 1-888-370-1814. 1-888-370-1814. 1-888-370-1814.
•Reference no. D39502A. •Reference no. D39503. •Reference no. D39505. •Reference no. D39504.
Controllers
184 www.rainbird.com
Spray Heads
Rotary Nozzles
Central Controls
Rotors
Impacts
Valves
Controllers
Who better to trust than the people who pioneered Central Controls
central irrigation control?
Rain Bird continues to advance technologies that make it possible to efficiently manage
irrigation for a single site or set of sites from one location. Systems automatically measure Commercial
Pump Stations
and react to actual site conditions, optimizing landscape quality and saving valuable
resources. This is ultimate control. And everything is accomplished from one central
location. That's sophisticated simplicity. That's the trusted performance of Rain Bird®
Landscape Drip/
central control. For 30 years, Rain Bird has delivered central control systems designed to Xerigation
Install Confidence. ®
®
Install Rain Bird Central Control. Accessories
Resources
& Training
Reference
Central Controls
Central Control
186 www.rainbird.com
Central Controls
Central Control
www.rainbird.com 187
Central Controls
Features
•Solid-state design.
•Increase flexibility and confidence with UL listed, indoor/outdoor,
modular MDC controller.
MDC-200 Controller
•Program and monitor MDC controller from a PC or laptop.
•Improve aesthetics and reduce costs with buried in-field controls.
•Protect against the elements with completely encapsulated electronic
components.
•Utilize less wire than conventional satellite systems.
•Simple two-wire system, with equipment that can be spliced and
stored during installation.
•Pre-coded decoder addressing eliminates confusion associated with
switch-based addressing.
•Reduce chance of damage from animals or vandals using
underground “switch boxes”.
Controllers
Operating Specifications
•Maximum number of decoders: 50/100/150/200 depending on
model selection and/or number of expansion modules.
•Maximum number of simultaneous valves: 10 irrigation valves, 1
non-irrigation valve
How To Specify
•Programs: 10 + 1 auxiliary
MDC - 200 •Maximum number of simultaneous programs: 2+1 auxiliary
•Irrigation methods: Steps
Number of Addresses •Days: 14, every X day (X=1-14)
50200: 50 addresses
expandable to 200 •Start times: 6 per program
200: 200 addresses •Start methods: Day and time start, every X day + first day
50D: 50 address
Model
expansion module •Pausing of programs: Yes
MDC
Central Control
188 www.rainbird.com
Central Controls
Central Control
www.rainbird.com 189
Central Controls
FD-TURF (continued)
•Wires: Dimensions:
FD-101TURF: Blue to cable, white to solenoid •FD-101TURF: Length: 2.77 in. (70 mm), Diameter: 1.5 in. (40 mm)
FD-102TURF: Blue to cable, white to solenoid
•FD-102TURF: Length: 3.35 in. (85 mm), Diameter: 1.77 in. (45 mm)
FD-202TURF: Blue to cable, white and brown to solenoids
FD-401TURF: Blue to cable, color-coded to solenoids •FD-202TURF: Length: 3.35 in. (85 mm), Diameter: 1.97 in. (50 mm)
FD-601TURF: Blue to cable, color-coded to solenoids •FD-401TURF: Length: 3.94 in. (100 mm), Diameter: 2.56 in. (65 mm)
•Surge Protection: Built-in (FD-401TURF & FD-601TURF only) •FD-601TURF: Length: 3.94 in. (100 mm), diameter: 2.56 in. (65 mm)
•Output Power: Adjustable from controller
•Encapsulation: Fully waterproof
Models
•Address: Pre-coded from factory (i.e., no switches) •FD-101TURF Field Decoder interfacing signal line and one valve
•Electrical Input: •FD-102TURF Field Decoder interfacing signal line and valve or one
Nominal voltage: 34Vpp (24V AC) from 2-wire line pair of valves
Minimum voltage: 21 Vpp (15V AC) •FD-202TURF Field Decoder interfacing signal line and 2 valves or
•Standby Current: 2 pairs of valves
FD-101TURF: 0.5 mA •FD-401TURF Field Decoder interfacing signal line and up to 4
FD-102TURF: 0.5 mA individual valves. Comes with built-in LSP-1.
FD-202TURF, FD-401TURF & FD-601TURF: 1 mA •FD-601TURF Field Decoder interfacing signal line and up to 6
•Input Fuse (FD-401TURF & FD-601TURF only): 300-500 mA, individual valves. Comes with built-in LSP-1.
thermal •LSP-1TURF Line Surge Protection
•Electrical Output: •SD-210TURF Sensor Decoder interfacing signal line and analog or
Max. voltage: 33 Vpp digital decoders**
Max. load: •Relay-100 Pump Start Relay. Field decoder is required for operation.
FD-101TURF: 1 Rain Bird solenoid
FD-102TURF: 2 Rain Bird solenoids ** Pulse transmitter (PT322 or PT1502) required for SiteControl two-wire
decoder system
FD-202TURF: 4 Rain Bird Solenoids (two per address)
FD-401TURF: 4 Rain Bird Solenoids (1 per address)
FD-601TURF: 4 Rain Bird solenoids (1 per address)
•Maximum Cable Runs*:
14 gauge
Star: 2.4 miles
Loop: 9.6 miles
•Grounding:
LSP-1 surge protection required every 500 feet along two wire path,
grounded to a 10 ohm or less earth ground.
•Decoder/Solenoid Wires -
Electrical Resistance:
Max. 3 ohms
•Max. Distance Decoder/Solenoids:
Cable length:
14 gauge: 456 feet
•Wiring:
Maxi Cable, i.e. 2 x 14-gauge (1.5 mm2) solid copper, double
jacketed, UF insulated type (10- or 12-gauge may also be used)
•Surge Protection: 40 V, 1.5 kW transil
Note: Rain Bird recommends using waterproof connectors for all connections.
Central Control
190 www.rainbird.com
Central Controls
Hybrid system
•Expand your system with the purchase of the hybrid software
module.
•Same system can operate satellites and/or decoders via a
2 wire-path.
SiteControl
Central Control
www.rainbird.com 191
Central Controls
SiteControl (continued)
Superior Monitoring and Programming TWI Series
•Flo-Graph™ allows visibility of real-time graphics with individual SiteControl only
station information presented in colorful charts.
•Flo-Manager™ balances system demands and maximum capacities Allows real-time, two-way communication between SiteControl
with efficiency helping to lower water demand, reduce system wear central controller and central control hardware.
and tear and save energy.
Enables system to use advanced in-field and back-up capabilities
•Cycle + Soak.™ Better control the application of water on slopes and of ESP-SAT two-wire or LINK versions.
in areas with poor drainage.
•QuickIRR™ and SimpleIrr™. Quick and easy methods to build Can be set up to grow with system. Standard unit operates up to 28
irrigation schedules and programs based on your parameters. channels (672 satellite stations) and can be expanded up to 112
•Print Office feature prints all monitor log and site information with a channels (2,688 stations).
clean and concise format for easy site monitoring and
troubleshooting. Features
•SmartSensors™ allows monitoring flow and other conditions, as well •Can be set for up to 112 ESP-SATs, pulse or sensor decoders in a
as setting specific reactions selected by the user. SiteControl system.
•TWI operates up to 28 satellites, pulse decoders or sensor decoders
Other Features per wire-path.
•Water usage logs •TWI comes standard with one wire-path, upgradeable to 4 wire-
•Station run time logs paths with the purchase of an “additional wire-path” module.
•Posted & dry run logs •SiteControl system can be set up to run up to 4 TWIs.
•ET spreadsheet •UL-Listed. Indoor use.
•Operates with all existing Rain Bird Central Control satellites •Wall Mount: drawn steel, seamless, cabinet with hinged front panel.
•PC anywhere32 included (for tech support) •Computer data path: RS-232 serial cable.
•1 year support plan included
Electrical Specifications
Models TWI Hardwire
•SCON - Desktop Central Controller •Input required: 120VAC ± 10% @ 1.25A 60/50Hz or 220/230/240VAC ±
10% @ .5A 50/60Hz
Software Module Options •Output: 2 x 26.5VAC @ 0.9A 60/50Hz or 4 x 26.5VAC @ 0.9A 50/60Hz
•Smart Weather •Circuit Breaker: NA (Autoresettable)
•Automatic ET TWI Link
•Hybrid Module •Input required: 120VAC ± 10% @
•Smart Sensor 1.25A 60/50Hz or 220/230/240VAC ± 10%
•Map Utilities @ .5A 50/60Hz
•Freedom •Output: NA
TWI Interface
•8 Additional Locations •Circuit Breaker: NA
•Additional Wire-Path (2nd) Grounding
•Additional Wire-Path (3rd) •All TWI’s shall be grounded to a
5-ohm or less earth ground How To Specify
•Additional Wire-Path (4th)
•Upgrade from SiteControl to SiteControl Plus
Dimensions TWI - SAT
•Width: 151⁄2" (39,4 cm)
•Height: 121⁄2" (31,7 cm)
•Depth: 6" (15,2 cm) Satellite Data Path
SAT: Two-wire (hard wire)
SATL: MAXILink™ Radios
Models
Model
•TWISAT TWI
•TWISATL
Central Control
192 www.rainbird.com
Central Controls
Features
•Works with Rain Bird commercial field and sensor decoders
(FD-101TURF, FD-102TURF, FD-202TURF, FD-401TURF,
FD-601TURF, SD-210TURF).
•Two-wire communications path also allows advanced diagnostic and
sensor features for the Central Controller.
•SDI (Small Decoder Interface) can interface with up to 200 decoder
addresses and can activate up to 400 solenoids.
•LDI (Large Decoder Interface) can interface with up to 500 decoder
addresses and can activate up to 1000 solenoids.
•SDI & LDI come standard with up to 4 wire-paths possible.
•Computer data path: RS-232 serial cable.
•Decoder data path: 2-wire.
•Wall Mount: heavy-duty, plastic, cabinet with a key-lock door.
Electrical Specifications
North America
•External transformer
•Input: 120 VAC ± 10% @ .59A 60Hz SDI Interface (LDI not shown)
•Output: 24VAC @ 2A 60Hz
•Circuit Breaker: NA (Autoresettable)
•UL listed. Indoor use.
International Recommended Specifications
(transformer not supplied )
(model: ISDITURF & ILDITURF)
How To Specify
•Input: 220, 230, 240VAC ± 10% @ 0.36A 50Hz
•Output: 24VAC @ 2A 50Hz SDI - TURF
•CE listed. Indoor use.
Grounding
•LSP-1 surge protector for each wire path. Application
TURF - SiteControl
•All SDIs and LDIs shall be grounded to a 5 ohm or less earth ground.
Model
SDI: Controls 200 addresses
LDI: Controls 500 addresses
Central Control
www.rainbird.com 193
Central Controls
Maxicom2
Central Control
194 www.rainbird.com
Central Controls
Cluster Control Unit (CCU) Series Computer Data Path Options (Central Controller to CCU)
Maxicom Only
2®
•Telephone modem via dial-tone telephone lines (modem included)
•Telephone modem via cellular telephone system (modem not
Orchestrates the real-time operations of up to 28 field units
included)
(satellite controllers) as a single virtual controller (site) in the
Maxicom2 system. •Radio modem via radio (point to point) (RS232 port included)
•Hardwire/direct connection (RS232 port included)
Enables a dynamic system that processes each station to be
•Fiber optic cable (RS232 port included)
activated in real-time, allowing adaptation of station sequence to
changing conditions for maximum efficiency. •Ethernet (RS232 port included)
Instantly responds to unexpected conditions and sensor inputs, Satellite Data Path Options (CCU to Satellite)
taking actions to resolve problems such as locating and isolating •Hardwire/2-wire path (1500 Ω loop resistance)
line breaks, or pausing irrigation during wind gusts.
•MAXILink wireless radio path (MAX 2 watt ERP Narrowband)
Features
Electrical Specifications
•CCU-28 operates up to 28 satellites, pulse decoders, or sensor
•Input required: 117 VAC±10% @ .5A 60 Hz or
decoders.
220/240/260±10% @ .5A 50 Hz
•CCU-6 operates up to 6 satellites, pulse decoders, or sensor decoders.
•Output: 26.5 VAC, 60Hz or 50 Hz, .5A
•LED display that provides current satellite status.
•Circuit breaker: NA
•Stores and executes schedule instructions from the central controller.
•Autoresettable poly switch .65A open (steady state)
•The CCU utilizes Flo-Watch™ to monitor hydraulic conditions in the 1.3A open (surge)
field, checking for breaks in system piping, or valve malfunctions.
•Single-point grounding bus bar
The CCU will automatically identify where the problem is located,
initiate valve or mainline shutdown to isolate the problem area, and
continue with irrigation for the remaining available valves. Dimensions
•The CCU utilizes Flo-Manager™ to monitor and sequence valves •Wall Mount
scheduled to be turned on, so expected demand does not exceed the Width: 115⁄16" (28,7 cm)
hydraulic capacity of POCs. Height: 111⁄2" (29,2 cm)
•The CCU can start, advance, pause, or cancel schedules according to Depth: 61⁄2" (16,5 cm)
sensor input (rain, wind, etc) from the field. •SS Pedestal
•Communications activity LEDs show current communications status. Width: 111⁄2" (29,2 cm)
•Each unit provides either two-wire or MAXILink™ wireless Height: 30" (76,2 cm)
communication to satellite controllers and sensors.
Depth: 111⁄2" (29,2 cm)
•Anti-rust, corrosion-resistant design.
•UL listed. Models
Mounting •CCU-28-W: 28 channels, wall mount
•CCU-28-S: 28 channels,
•Wall mount: drawn steel, seamless, locking, weatherproof cabinets
stainless steel pedestal
•Pedestal: brushed stainless steel with removable front panel
•CCU-6-W: 6 channels,
wall mount
How To Specify
•CCU-6-S: 6 channels, CCU - 28 - W
stainless steel pedestal
Mounting
W: Wall mount
S: stainless steel
pedestal
Channels
6: 6 channels
Model 28: 28 channels
CCU
www.rainbird.com 195
Central Controls
ESP-SAT
12, 16, 24, 28, 32, 36, 40 Stations
Maxicom2® and SiteControl
Central Control
196 www.rainbird.com
Central Controls
Depth: 111⁄2" (29,2 cm) Note: 12, 16 & 24 station models occupy 1 channel on CCU. 28, 32, 36 & 40
station models occupy 2 channels on CCU.
Note: Link Radio communication satellites have 2 sensor inputs.
Central Control
www.rainbird.com 197
Central Controls
Features
•Combines the function of a Cluster Control Unit (CCU) with an
ESP-SAT controller.
•Can monitor up to 2 Maxicom sensors.
•Stores and executes schedule instructions from the central controller.
•Operates up to 40 stations.
•Communicates with central computer via telephone, hardwire, radio,
fiber-optic cable, or Ethernet.
•Available in metal wall mount, stainless steel pedestal, module kit for
existing stainless steel pedestals or upgrade kit for existing ESP-MC or
ESP-SAT controllers.
•Four programs with eight start times each allow mixed irrigation
applications in a single controller.
•Two master valve terminals, one programmable by station, provide
better control.
ESP-28SITE-W Site Satellite
•365-day calendar with leap year intelligence for one-time date and
time setting.
•Event day off option to set any day of the month as a non-watering
day for all programs.
•Programmable rain delay enables system to stay off for specified
period with auto-restart.
•Water budget by program provides adjustments from 0-300% in 1%
increments.
•Cycle+Soak™ by station allows total irrigation run time to be split into
How To Specify usable cycles, minimizing runoff.
•Sensor override switch with LED to indicate when irrigation is
ESP - 24SITE - W suspended.
Mounting •Non-volatile, 100-year memory holds program, date, and time during
W: Metal wall
mount power outages.
S: Stainless Steel
Number of Stations •Automatic fault indication identifies electrical shorts, skips shorted
12SITE: 12 stations stations, and continues watering remaining program.
16SITE: 16 stations
24SITE: 24 stations •Quick-connect terminal strip speeds installation.
28SITE: 28 stations
32SITE: 32 stations •Universal remote ready: pre-installed connectors for addition of
Model 36SITE: 36 stations
ESP 40SITE: 40 stations remote products.
Central Control
198 www.rainbird.com
Central Controls
Central Control
www.rainbird.com 199
Central Controls
Features
•Combines the power of a Cluster Control Unit (CCU) with the
capabilities of an ESP-LX Plus controller.
•Stores and executes schedule instructions from the central controller.
•Includes 2 sensor inputs - no decoders required.
•Operates up to 24 stations.
•Communicates with central controller via telephone, hardwire, radio
or fiber-optic cable.
•Available in plastic wall mount or module kit to upgrade existing
ESP-LX Plus controllers.
•Four independent programs (A-, B-, C-, and D-drip), with six start
times each.
•365-day calendar with leap year intelligence for one-time date and
ESPLX24STE Site Satellite time setting.
•Non-volatile program memory maintains user’s program during a
power outage independent of the battery backup.
•Removable, battery-programmable panel.
•Four day-cycle modes (CUSTOM, CYCLICAL, ODD, or EVEN)
selectable for each program for maximum flexibility.
•Event-Day-Off option to set any day of the month as a non-watering
day for all programs.
•Programmable Delay-Between-Stations provides time for slow-
closing valves to turn off completely.
•Start time stacking prevents hydraulic overload.
•Diagnostic circuit breaker and LED fault indicator identify electrical
How To Specify shorts, skip shorted stations, and continue irrigation cycle.
•Includes easy-to-mount, heavy-duty plastic cabinet with key-lockable
ESPLX - 24 - STE door and swing-out, quick release face panel, as well as all 120v
Controller Option
internal wiring (no junction box needed).
STE: SITE Satellite
(120 VAC) •Rapid Station Test Routine (RASTER) enables the controller to
ST: SITE Satellite diagnose and troubleshoot field wiring, solenoid, and controller
Number of (230 VAC)
Stations problems.
16: 16 stations STM: SITE Module Kit
20: 20 stations (Upgrade) (120 VAC) •Special Fuse Circuitry detects and displays when a fuse has blown.
24: 24 stations
SM: SITEModule Kit
Model (Upgrade) (230 VAC)
ESPLX (120 VAC)
IESPLX (230 VAC)
Central Control
200 www.rainbird.com
Central Controls
Electrical Specifications
•Input required: 117 VAC ± 10%, 60 Hz (International models 230 VAC
± 10%, 50 Hz).
•Output: 26.5 VAC, 1.5A
•Station Capacity: ONE 24 VAC, 7VA solenoid valve per station plus a
master valve or pump start relay
•Heavy-duty electrical surge protection.
Central Control
www.rainbird.com 201
Central Controls
Central Control
202 www.rainbird.com
Central Controls
Features Features
•Allows communication between CCU or TWI and satellite controllers •Uses standard telephone interface or radio repeater at computer.
without wires. •Hand-held remote can be either a cellular telephone or
•Easy installation in CCU, TWI or ESP-SAT-Link controllers. hand-held radio.
•Available preprogrammed in Private Business frequencies. •2-way talk communication is available with radio system.
•Special preprogrammed frequencies available. •Standard land-line telephones can also control the system.
•Password protected for security.
Models •Start/stop stations, schedules, or site (rain shutdown)
•RMK406NARR (406-430 MHz - Government only) •One unit covers entire central control system.
•RMK450NARR (450-470 MHz - Commercial band)
Hardware
License Requirements •Radio System – repeater, hand-held unit, antenna, cables
•FCC frequency license required •Telephone System – DTMF module, power supply, cable
Models
•FREEDOMFO (phone)
•FREERADWSP (radio, special frequency)
Central Control
www.rainbird.com 203
Central Controls
How To Specify
FS - 100 - B (Flow Sensors)
FS = B = Brass
Flow P = Plastic (PVC)
SS = Stainless Steel
Sensor
100 = 1" (25mm)
150 = 11⁄2" (40mm)
200 = 2" (50mm)
300 = 3" (75mm)
400 = 4" (110mm)
350 = 3" (75mm) & higher
Central Control
204 www.rainbird.com
Central Controls
Models
•WS-PRO-PH: Telephone
Rain Bird Flow Sensor Suggested Operating Range
•WS-PRO-PHS: Telephone, Solar Power
The following table indicates the suggested flow range for Rain Bird
•WS-PRO-DC: Direct Connect
Flow Sensors. Rain Bird Sensors will operate both above and below the
indicated flow rate. However, good design practice dictates the use of
this range for best performance. Sensors should be sized for flow rather
than pipe size.
Central Control
www.rainbird.com 205
Central Controls
RAINGAUGE ANEMOMETER
Maxicom2® or SiteControl Maxicom2® or SiteControl
Features Features
•Accurate rain counter switch counts rainfall in 1/100th inch •Accurate wind speed.
increments. •Heavy-duty metal mounting bracket.
•Heavy-duty metal construction. Note: Requires PT322 or PT1502 pulse transmitter to communicate with
Maxicom2 or SiteControl systems.
•Mounting bracket.
•Debris screen. Model
•4" diameter. •ANEMOMETER
Model
•RAINGAUGE
RAINGAUGE
ANEMOMETER
Functions
•Sensor Decoder: Monitors dry contact switches (moisture sensor,
pressure switch, security systems, etc.) for open or closed conditions
and informs the system of switch status.
•Pulse Decoder: Reads pulses from monitoring devices, such as flow
sensors and counting rain gauge, and sends the information to the
system for analysis and action. DEC-SEN DEC-PUL
Electrical Specifications
•Input required: 26 VAC (provided by the 2-wire communication path.
No separate power supply required)
Central Control
206 www.rainbird.com
Central Controls
MSP-1 MGP-1
Maxicom2® or SiteControl Maxicom2® or SiteControl
Surge Protection for Two-Wire Satellite and Surge Protection for Two-Wire Satellite and
Two-Wire Decoder Systems Two-Wire Decoder Systems
Features Features
•Protects central control components from electrical surges on a two- •Provides a mounting location for MSP-1 or other grounding wires
wire communication path. directly to a grounding rod or pipe.
•Can be installed in satellite or CCU pedestal or underground •Installed on grounding rod or pipe.
in conjunction with MGP-1 (Maxicom2® Grounding Plate).
Model
Model •MGP-1
•MSP-1
MSP-1
MGP-1
ESP-MIB/ESPSITEU DPU-210
Maxicom2® or SiteControl MDC or SiteControl
Interface Board Kit Decoder Programming Unit
Features •Decoder Programming Unit tests and verifies operation of the MDC
•Easy installation into existing ESP-MC controllers. or SiteControl field decoders. Also allows for re-programming
•Easy wiring with ESP-MC style wire connectors. decoder addresses for maximum site set-up flexibility.
•Available in two-wire and MAXILink™ satellite versions.
(Radio/modem kit must be purchased separately.)
•Includes all hardware (including transformer) and cables for
installation in wall-mounted or pedestal-mounted controllers.
Models
•ESPMIB2: Two-wire data path satellite
•ESPMIBL: MAXILink radio data path satellite
•ESPSITEU: Site satellite (Maxicom2 only)
DPU-210
ESP-MIB-TW
Central Control
www.rainbird.com 207
Central Controls
Insurance for Your Central Control System •Per Incidence and Other Support - In addition to Telephone Support
Central Control Support Plans on a per incident basis, Rain Bird offers Services including Central
Central programming, database initialization & site mapping
services, weather station service, grounding grid services, installed
Insurance for your central control system with coverage system evaluation services, diagnostic troubleshooting and repair
plans that suit your needs — 5 years, 3 years, or 1 year. services, and more. We will work with you to meet your needs. As a
Global Support Plan subscriber, you have preferential pricing on our
Factory-direct service that includes priority technical
services. Call us for more information.
support, training, and hardware replacement.
Central Control
208 www.rainbird.com
Spray Heads
Rotary Nozzles
Impacts
Valves
Controllers
line advantage.
Rain Bird® pump stations combine energy-efficient, industry-leading variable-frequency
drive technology with superior hydraulic capabilities. Available options include single pump, Commercial
Pump Stations
multi-pump, submersible and vertical turbine systems for commercial pressure boosting,
flooded suction and suction-lift applications. Rain Bird pump stations assure enduring
performance, even under the harshest operating conditions. The result is a greater return on
Landscape Drip/
investment when compared to traditional pumping systems. Xerigation
Install Confidence. ®
®
Install Rain Bird Pump Stations. Accessories
Resources
& Training
Reference
Commercial Pump Stations
Leading Edge VFD Technology
Plug-N-Pump NEW
•Integrated drainage ports designed to bypass the pump station's full
Integrated Pump Station and Enclosure capacity in case of piping failure insures the water level never exceeds
6 inches and after two minutes below 1⁄4 inch.
Single Pump and Multi-Pump Stations
•Custom designed HVAC packages protect the pump station's internal
components increasing their longterm reliability.
Integrated pumping system with powder coated mild steel
enclosure, available in single pump and multi-pump •Enclosure air intake ports positioned off the ground help reduce dirt
configurations, custom designed piping, HVAC, alarm options, and and debris collection.
other materials of construction available upon request. •Multiple piping configurations available with the standard through
the concrete pad or through the enclosure delivered NPT or ANSI
Plug-N-Pump delivers single source responsibility for the entire flanged.
pumping system insuring trouble-free installation and operation. •Factory tested, industrial grade, vertical multistage centrifugal pumps
Enclosures sold separately for pump station retrofits, filtration with site serviceable cartridge style mechanical seals.
systems, backflow, and pressure reducing stations. •Plug-N-Pump systems delivered with factory tested, configured, and
wired variable frequency drives, controllers, HVAC, and electrical
accessories.
Features
•Optional external mounted visual and audible alarms available.
•Plug-N-Pump enclosures designed to accommodate the pump
•Optional lockable NEMA rated electrical disconnect box mounted on
station, control panel, electrical, piping, HVAC, and alarm systems
a outside enclosure wall.
with sufficient room to service pump(s) without removing or
disassembling the enclosure or piping.
Operation Range
•NEMA 3R equivalent enclosure rating with polyurethane based
powder coating process. •Flow Range: 0 - 2400 GPM
•Plug-N-Pump enclosures deliver superior acoustical performance. •Operational Voltage:
•Fork-Lift ports standard on the front and back sides on all Plug-N- 208/230V/60hz/1-Phase
Pump enclosures. 208/230/460V/60Hz/3-Phase
•Removable enclosure doors and panels with locking options to help •Temperature Range: 0°- 140°F
deter vandalism.
Plug-n-Pump - Enclosure
210 www.rainbird.com
Commercial Pump Stations
Leading Edge VFD Technology
Features
•Variable frequency drive, PI controller, and user interface integrated
into the TEFC motor housing providing pressure set-point
adjustment via plus and minus buttons.
•Site-serviceable mechanical seal prevents removing or disassembling
pump station enclosure or piping.
•Twice the industry standard warranty with 24 months from
installation or 30 months from date of purchase. CRE-Series Pump Station
•VFD has no moving parts and eliminates the expensive maintenance
of PRV (pressure regulating valve) systems.
•Pumps with VFD last longer by adjusting workload to meet system
requirements and offer extremely quiet, low vibration operation.
•VFD significantly reduces “water hammer”, which results in less
overall irrigation system stress, wear and tear and ultimately lower
maintenance costs.
H [ft]
1000
CRE
800 60 Hz
600
400
How To Specify
200 CRE 32 - 3 - 2
CRE 1 CRE 3 CRE 5 CRE 10 CRE 15
Reduced
Dia. Stages
100 2
80
CRE Stages
60 20 3
Flow
40 m3/hr
CRE 32 CRE 45
CRE 64 Model
CRE
02
2 4 6 8 10 20 40 60 80 100 200 400 600 800
Q [US GPM]
www.rainbird.com 211
Commercial Pump Stations
Leading Edge VFD Technology
Operating Range
• Flow Range: 0 - 400 GPM
• Head Range: 0 - 800 ft
• HP Range: 1 - 10 hp
•Water Temperature Range: 32° - 176° F
• Maximum Working Pressure: 360 PSIG
Electrical Specifications
• Input Required: 50/60 Hz
1 Phase 208/230 Volt
3 Phase 460 Volt
Models
•CRE 1 • CRE 3
•CRE 5 • CRE 10
• CRE 15 • CRE 20
• CRE 32 • CRE 45
• CRE 64
212 www.rainbird.com
Commercial Pump Stations
Leading Edge VFD Technology
Multi-Pump Stations
ME and MF Series
Commercial Irrigation, Water Features, and Aeration
Features
•Single source manufacturing with 316SS suction and discharge
headers, 304SS pump station skid and control panel stand, industrial
grade vertical multi-stage centrifugal pumps, and the PMU 2000
advanced pump station controller
•Site-serviceable mechanical seal prevents removing or disassembling ME and MF Series Pump Station
pump station enclosure, piping, or motor (if 15Hp or greater).
How To Specify
ME 2 CRE 32 - 3 - 2
Reduced
Dia. Stages
2
Stages
3
Flow
m3/hr
Model
CRE
# Pumps
2
Type
ME
www.rainbird.com 213
Commercial Pump Stations
Leading Edge VFD Technology
Electrical Specifications
•Input Required: 50/60 Hz
1 Phase 208/230 Volt
3 Phase 208/230/460/575 Volt
214 www.rainbird.com
Commercial Pump Stations
Leading Edge VFD Technology
FAULT
Pond Configuration
Float
www.rainbird.com 215
Commercial Pump Stations
Leading Edge VFD Technology
Operation Range
•Flow Range: 0 - 750 GPM 10, 18 or 30 mesh
heavy-duty stainless
•Water Temperature Range: 32°- 140°F steel covering
Heavy steel Rotating spray bars
•Positive Prime Pressure: 20 PSIG construction
Self-Cleaning Basket
Foot Valve
216 www.rainbird.com
Commercial Pump Stations
Leading Edge VFD Technology
Color, LCD, touch-screen interface standard feature on all pump Submersible VFD Pumping System
stations provides a user friendly menu system enabling pressure
setting adjustments, displaying pump station performance, and
alarm conditions.
Features
• Submersible pumps with 304SS construction, 431SS pump shaft, and
3450/3525 RPM submersible motors.
• Horizontal, double suction, split-case pumps with cast iron casing,
bearing cover, and bearing bracket, bronze impeller, cast wear rings,
shaft sleeve, and bushings, carbon steel shaft, and Type 51
mechanical seals.
• End suction, close-coupled, centrifugal pumps with cast iron casing,
and adapter, bronze shaft sleeve, adapter wear ring, and casing wear LCD touch-screen
ring, silicon brass impeller, carbon steel pump shaft, and Type 21 interface
mechanical seal.
www.rainbird.com 217
Commercial Pump Stations
Leading Edge VFD Technology
218 www.rainbird.com
Commercial Pump Stations
Leading Edge VFD Technology
Features
Dual Turbine VFD System
•Pump station base, pipe, and fittings powder painted with a 5-7 mil with Discharge Filtration
thick coating.
•Cast iron discharge heads with 2 mil thick enamel coating, head-shaft
coupled above the stuffing box assembly, and 125lb. ANSI discharge
flanges.
•Cast iron stuffing box with a minimum of (6) packing rings,
adjustable bronze packing gland, piping for drainage, bypass tubing
for lubrication, and cooling returned to the wet well.
•416SS, one-piece, turned, ground, and polished headshaft with
impeller adjustment at the top of the head-shaft.
•ASTM Grade B steel column pipe furnished in interchangeable 10
feet sections or less for 1800 RPM applications provided threaded or
flanged.
www.rainbird.com 219
Commercial Pump Stations
Leading Edge VFD Technology
220 www.rainbird.com
Spray Heads
Rotary Nozzles
Impacts
Valves
Controllers
®
Install Rain Bird Landscape Drip.
Accessories
Resources
& Training
Reference
Landscape Drip / Xerigation®
Landscape Drip System Overview
Water Source 7 8 6
7
1
4
1a 1b
9
3
5 10
2
24
22
21 6
23
1. Control Zone Kit [p. 247] 5. Xeri-Black Stripe Tubing [p. 242] 11. Easy Fit Elbow [p. 243]
1a. Low Flow Valve [p. 254] 6. Xeri-Bug Emitter [p. 224] 12. Diffuser Bug Cap [p. 236]
1b. Pressure Regulating Filter [p. 256] 7. 1⁄4" Tubing Stake [p. 236] 13. PC Emitter Diffuser Cap [p. 236]
2. Easy Fit Female Adapter [p. 243] 8. 1⁄4" Tubing [p. 241] 14. PC Module [p. 226]
3. Easy Fit Coupling [p. 243] 9. 1⁄4" Tee [p. 245] 15. Poly Flex Riser Assembly [p. 237]
4. Xeriman Tool [p. 228] 10. Tie-Down Stake [p. 246] 16. B.I.G.I.E Stake [p. 244]
222 www.rainbird.com
Landscape Drip / Xerigation®
Landscape Drip System Overview
13
18
12
14 19
8
7
20
8
15
32
11 6 17
3
16 29 5 30
25
12 6
28
29 8
7 27
7
5 26
8
15
29 PVC
31
17. 1⁄4" Self-Piercing Barb Connector [p. 245] 23. Landscape Dripline [p. 238] 28. Xeri-Spray [p. 230]
18. Multi-Port Nozzle [p. 234] 24. Tubing Cutter [p. 264] 29. Easy Fit Tee [p. 243]
19. Xeri-Pop [p. 233] 25. Xeri-Bird 8 [p. 232] 30. Easy Fit Flush Cap [p. 243]
20. Xeri-Bubbler [p. 229] 26. In-Stem Pressure Regulator [p. 263] 31. Purple Landscape Dripline [p. 238]
21. Air Relief Valve Kit [p. 240] 27. EMT-6XERI [p. 236] 32. Easy Fit Male Adapter [p. 243]
22. SEB-6X Emitter / Valve Box [p. 246]
www.rainbird.com 223
Landscape Drip / Xerigation®
Emission Devices
Inlet
Xeri-Bug™ Emitters
Outlet Point-source low-flow emitters for watering the root zones of
plants, trees, and container plants.
The only emitters with self-piercing barbs, making them the easiest
to install using the Xeriman™ tool.
Features
Inlet •Flow-rates of 0.5, 1.0 and 2.0 GPH (1,89; 3,79 and 7,57 l/h).
Outlet •Pressure-compensating design delivers uniform flow throughout a
wide pressure range (15 to 50 psi; 1,0 to 3,5 bars).
•Available with 3 different inlets (1.0 and 2.0 models):
• Self-piercing barb for quick, one-step insertion into 1⁄2" or 3⁄4"
drip tubing.
XB-05PC-1032, XB-10PC-1032, XB-20PC-1032 • 10-32 threaded inlet that easily threads into a polyflex riser
(see page 237).
• 1⁄2" FPT inlet that easily threads onto a 1⁄2" PVC riser.
•Outlet barb securely retains 1⁄4" distribution tubing
Outlet
(DT-025 or PT-025).
•Self-flushing action minimizes clogging.
•Robust design made from highly inert materials that are resistant
to chemicals.
•Durable plastic construction is UV-resistant.
•Color-coded inlet identifies flow rate (on XB-xx-PC and
1/2" FPT XB-xx-PC-1032 models).
Inlet
224 www.rainbird.com
Landscape Drip / Xerigation®
Emission Devices
www.rainbird.com 225
Landscape Drip / Xerigation®
Emission Devices
Pressure-Compensating Modules
Point-source medium-flow emitters for watering larger shrubs and
trees, and for precisely regulating water flow to Xeri-Bubblers
and Xeri-Sprays.
PC-05, PC-07, PC-10 The only emitters with self-piercing barbs, making them the easiest
to install using the Xeriman™ tool.
Features
•Flow-rates from 5 to 24 GPH (18,93 to 90,84 l/h).
PC-12, PC-18, PC-24
•Pressure-compensating design delivers uniform flow throughout a
wide pressure range (10 to 50 psi; 0,7 to 3,5 bars).
•Available with 2 different inlets:
• Self-piercing barbs for quick one-step emitter insertion into 1⁄2"
or 3⁄4" drip tubing.
• 10-32 threaded inlet that easily threads into a polyflex riser
(see page 237).
•Inlet and outlet barbs securely retain 1⁄4" distribution tubing
PC-05-1032, PC-07-1032, PC-10-1032
(DT-025 or PT-025).
•Robust design - durable plastic construction is UV-resistant.
•Made from highly inert materials that are resistant to chemicals.
•Color-coded outlet identifies flow rate.
Operating Range*
•Flow: 5 to 24 GPH (18,93 to 90,84 l/h)
•Pressure: 10 to 50 psi (0,7 to 3,5 bars)
PC-12-1032, PC-18-1032, PC-24-1032 •Required Filtration: 100-mesh (150-micron)
* Use a PC Emitter Diffuser Cap to eliminate squirting water
when using a PC Module at the end of 1⁄4" distribution tubing
(DT-025 or PT-025) or on a polyflex riser (PFR/FRA).
How To Specify
PC - 05 - 1032
Optional
1032 threaded inlet
Flow
5 GPH (18,93 l/h)
7 GPH (26,50 l/h)
10 GPH (37,85 l/h)
12 GPH (45,42 l/h)
18 GPH (68,13 l/h)
24 GPH (90,84 l/h)
PC Diffuser
Model
PC: Pressure-Compensating Module
226 www.rainbird.com
Landscape Drip / Xerigation®
Emission Devices
www.rainbird.com 227
Landscape Drip / Xerigation®
Emission Devices
Operating Range
•Flow: 0.5, 1.0 or 2.0 GPH (1,89; 3,79 or 7,57 l/h)
•Pressure: 15 to 50 psi (1,0 to 3,5 bars)
•Filtration: 150-mesh (100-microns)
Models
•XB-05-6 (barb inlet) Blue
•XBT-05-6 (1⁄2" FPT inlet) Blue
•XB-10-6 (barb inlet) Black
•XBT-10-6 ( 1⁄2" FPT inlet) Black XM-TOOL
•XB-20-6 (barb inlet) Red
•XBT-20-6 ( 1⁄2" FPT inlet) Red
XBT-05-6, XBT-20-6
XB-10-6, XBT-10-6
228 www.rainbird.com
Landscape Drip / Xerigation®
Emission Devices
Xeri-Bubblers™ Models
Ideal for shrub plantings, trees, containers, and flower beds. •SXB-180-1032: Half-circle, 5 streams, 10-32 thread
•SXB-180-025: Half-circle, 5 streams, 1⁄4" barb
Features •SXB-180-SPYK: Half-circle, 5 streams, 5" spike;
•Adjust flow and radius by turning outer cap. includes barb x barb coupler
•Clean by completely unscrewing cap from base unit. •SXB-360-1032: Full-circle, 8 streams, 10-32 thread
•Three convenient installation connections available for design •SXB-360-025: Full-circle, 8 streams, 1⁄4" barb
flexibility: 10-32 self-tapping thread, 1⁄4" barb, and 5" spike. •SXB-360-SPYK: Full-circle, 8 streams, 5" spike
includes barb x barb coupler
Operating Range
•UXB-360-1032: Full-circle, umbrella, 10-32 thread
•SXB Series Flow: 0 to 13 GPH (0 to 49,21 l/h)
•UXB-360-025: Full-circle, umbrella, 1⁄4" barb
•UXB Series Flow: 0 to 35 GPH (0 to 132,48 l/h)
•UXB-360-SPYK: Full-circle, umbrella, 5" spike
•Pressure: 15 to 30 psi (1,0 to 2,1 bars) includes barb x barb coupler
Xeri-Bubbler Performance
Fully open (approximately 22 clicks)
SXB-180 SXB-360 UXB-360
Pressure Flow Radius of Flow Radius of Flow Radius of
psi GPH Throw ft. GPH Throw ft. GPH Throw ft.
15 8.7 1.2 8.7 0.6 28.5 0.7
20 10.3 1.5 10.3 1.0 31.0 1.1
30 13.0 2.0 13.0 1.5 35.0 1.9
How To Specify
SXB - 180 - 1032
Connection
1032: 10-32 self-
tapping thread
SXB-180-025 SXB-360-025 UXB-360-025 025: 1⁄4" barb
SPYK: 5" spike
BARB
Pattern
180 = Half circle
360 = Full circle
Model
SXB: Stream Bubbler
UXB: Umbrella Bubbler
www.rainbird.com 229
Landscape Drip / Xerigation®
Emission Devices
Features Features
•Adjust flow/radius by turning integral ball valve. •True micro-spray with full-circle fan spray pattern.
•Uniform emission pattern provides excellent distribution. •Adjust flow/radius by turning outer cap.
•10-32 self-tapping threads fit into 1⁄2" x 10-32 adapter •Three convenient installation connections for design flexibility:
(10-32A); 1800 Xeri-Bubbler™ adapter (XBA-1800); and polyflex 10-32 self-tapping thread, 1⁄4" barb and 5" spike.
riser (PFR-12). •Easily cleaned by completely unscrewing cap from base unit.
XS-360TS-025
XS-360TS-1032 XS-360TS-SPYK
XS-90 XS-180 XS-360
230 www.rainbird.com
Landscape Drip / Xerigation®
Emission Devices
Xeri-Spray 360° True Spray Performance Xeri-Spray 360° True Spray Performance METRIC
Fully open (approximately 22 clicks) Fully open (approximately 22 clicks)
www.rainbird.com 231
Landscape Drip / Xerigation®
Emission Devices
Features
•Threads onto any 1⁄2" riser and delivers water to multiple locations for
Optional PRS-050-30 increased system flexibility.
pressure regulator
•Each port accepts a Xeri-Bug™ emitter or PC Module for independent
flows from 0.5 to 24 GPH (1,89 to 90,84 l/h) or use a self-piercing barb
connector (SPB-025) for unrestricted flow.
•Integral 200 mesh (75 micron) filter is easily serviceable from the top
XBD-80
of the unit.
•Eight bottom-mounted, sure-grip barbed outlets securely retain 1⁄4"
distribution tubing (DT-025 or PT-025).
•Unique union base nut allows removal for Xeri-Bird 8 body from riser
for easy installation and maintenance.
Operating Range
•Flow: 0 to 24 GPH (0 to 90,84 l/h) per outlet (or use SPB-025 for
unrestricted flow)
•Pressure: 15 to 50 psi (1,0 to 3,5 bars)
Models
•XBD-80: Xeri-Bird 8 unit (includes 7 removable port plugs)
•XBD-81: Xeri-Bird 8 unit with eight 1 GPH (3,79 l/h) Xeri-Bug emitters
factory installed
Xeri-Bird 8 internals
232 www.rainbird.com
Landscape Drip / Xerigation®
Emission Devices
NEW
1
⁄4" distribution
tube snap collar How To Specify
XP - 600X
Model
Xeri-Pop
XP-600X XP-1200X Pop-Up Height
400X = 4" Pop-up
600X = 6" Pop-up
1200X = 12" Pop-up
www.rainbird.com 233
Landscape Drip / Xerigation®
Emission Devices
Multi Port Nozzles •30 mesh drop-in screen (included) provides at-the-nozzle filtering
2' and 5' low-volume nozzles ideal for watering annual flowers and is required for radius adjustment.
and ground cover. •Stainless steel radius adjustment allows precise control over spray
area and permits full shut-off.
•Uses standard nozzle threads and is compatible with all 1800 Series,
The only low-volume nozzle with adjustable square spray patterns, Uni-Spray, and Xeri-Pop Series pop-ups (including new 12"
ideal for planting beds, medians and other small areas. Xeri-Pops.)
Flat trajectory and no-mist performance make it an ideal choice for •Each bag of nozzles includes a punch tool for opening additional
areas near walks and windows where overspray is undesirable. ports; punch tool can be used with Xeriman™ Tool for ease of use.
Spray Nozzle Port Configurations and the Resulting Multi-Port Spray Patterns
A B C D E
1 Port 2 Ports 2 Opposite 3 Ports All 4 Ports
Open Open Ports Open Open Open
MP5S-SQ MP5S-SST MP5S MP5S MP5S
10.5 GPH 21.0 GPH 21.0 GPH 31.5 GPH 42.0 GPH
10'
5' 5'
5' A 5' B C D 5' E
5' 5' 10' 10'
5' 10'
Dotted lines on B, D and E represent where quadrant borders come together.
Order nozzle with 1 port open as MP5SQ. Specify desired pattern as indicated above. 5' 10'
Stream Nozzle Port Configurations and the Resulting Multi-Port Stream Patterns
A B C D E
1 Port 2 Ports 2 Opposite 3 Ports All 4 Ports
Open Open Ports Open Open Open
MP2Q-SS MP2Q-SS MP2Q-SS MP2Q-SS MP2Q-SS
5 GPH 10 GPH 10 GPH 15 GPH 20 GPH
234 www.rainbird.com
Landscape Drip / Xerigation®
Emission Devices
Distance Distance
Nozzle Pressure of Throw Flow Precip Precip Nozzle Pressure of Throw Flow Precip Precip
psi ft. GPM In/h In/h bars m l/h mm/h mm/h
Full 15 4 0.39 2.35 2.71 Full 1,0 1,2 90,0 60 69
20 4 0.45 2.71 3.13 1,5 1,3 110,0 61 70
25 5 0.51 1.96 2.27 2,0 1,5 120,0 53 61
30 5 0.55 2.12 2.45 2,1 1,5 120,0 54 62
Half 15 4 0.22 2.65 3.06 Half 1,0 1,2 50,0 67 78
20 4 0.25 3.01 3.47 1,5 1,2 60,0 67 78
25 5 0.28 2.16 2.49 2,0 1,5 70,0 58 67
30 5 0.30 2.31 2.67 2,1 1,5 70,0 59 68
Quarter 15 4 0.11 2.65 3.06 Quarter 1,0 1,2 25,0 67 78
20 4 0.12 2.89 3.33 1,5 1,2 30,0 66 76
25 5 0.14 2.16 2.49 2,0 1,5 30,0 58 67
30 5 0.15 2.31 2.67 2,1 1,5 30,0 59 68
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
Performance data taken in zero wind conditions.
Nozzle Pressure Radius Flow Precip Precip Nozzle Pressure Radius Flow Precip Precip
psi ft. GPM In/h In/h bars m l/h mm/h mm/h
Full 15 1.25 0.24 14.54 16.79 Full 1,0 038 53 369 426
20 1.50 0.28 11.81 13.63 1,5 046 69 277 320
25 1.75 0.30 9.55 11.03 2,0 053 79 210 242
30 2.00 0.33 7.99 9.22 2,1 061 76 203 234
Half 15 1.25 0.12 14.54 16.79 Half 1,0 038 26 369 426
20 1.50 0.14 11.81 13.63 1,5 046 35 277 320
25 1.75 0.15 9.55 11.03 2,0 053 40 210 242
30 2.00 0.17 7.99 9.22 2,1 061 39 203 234
Quarter 15 1.25 0.05 14.54 16.79 Quarter 1,0 038 11 369 426
20 1.50 0.06 11.81 13.63 1,5 046 15 277 320
25 1.75 0.07 9.55 11.03 2,0 053 19 210 242
30 2.00 0.08 7.99 9.22 2,1 061 19 203 234
www.rainbird.com 235
Landscape Drip / Xerigation®
Emission Devices
Outlet
Inlet
PC Diffuser
1 1
6 Outlet Manifold - EMT-6XERI ⁄4" Tubing Stake ⁄4" Tubing Stake
with Cap
Features Features
1 1 •Holds 1⁄4" distribution tubing Features
• ⁄2" FPT inlet threads onto ⁄2" riser and provides a manifold with six
free-flowing 1⁄4" barb outlets. and emitter or Diffuser Bug •Constructed of UV-resistant
Cap in place at the root zone of plastic material.
•Each barb outlet is sealed with a durable plastic cap.
the plant. •Used for holding 1⁄4"
•Plastic caps remove easily, allowing for a drip area that can be
•Accepts 1⁄4" distribution tubing distribution tubing (DT-025 or
customized with up to six different emission devices.
with 0.16” ID and 0.22” OD, PT-025) in place at the plant
•Attach 1⁄4" distribution tubing (DT-025 or PT-025) onto each outlet for including Rain Bird's 1⁄4" tubing root zone.
use with: Xeri-Bugs, PC Modules, Xeri-Pops, Xeri-Sprays, (DT-025 or PT-025). •Accepts 1⁄4" distribution tubing
and Xeri-Bubblers.
•Rigid stake makes installation from .19 (O.D.) to .256 (O.D.).
easier in hard soils. •Bug cap included.
Operating Range Note: If emitter is installed at inlet to
•Pressure: 15 to 50 psi (1,0 to 3,5 bars) distribution tubing, use a Diffuser
•Locking cap holds
Bug Cap (DBC-025) at tubing in place.
outlet of tubing to
Model prevent bugs from Model
•EMT-6XERI clogging tubing and
to help hold tubing •TS-025WCAP
in place
Model
EMT-6XERI •TS-025
TS-025 TS-025WCAP
236 www.rainbird.com
Landscape Drip / Xerigation®
Emission Devices
Operating Range
•Pressure: 15 to 50 psi (1,0 to 3,5 bars)
Models
•PFR/FRA 12” (30,5 cm)
PFR-12 PFR/FRA &
polyflex riser and adapter PFR/FRA24
•PFR/FRA24 24” (61,0 cm)
polyflex riser and adapter
Polyflex Riser and Riser Stake- 10-32 Thread Adapter 1800 Xeri-Bubbler
Stake Assembly Threaded Adapter
Features
Features Features •Inlet: 1⁄2" FPT that screws onto Features
•12" riser that is pre-assembled •Rugged stake for use with any 1⁄2" MPT riser. •Inlet: 1⁄2" female threads that
with a 7" (30,5 cm) stake. polyflex risers. •Outlet: 10-32 threads that screw onto a Rain Bird 1800
•Use with any 10-32 threaded •Constructed of UV-resistant accept Xeri-Bugs, PC Modules, series or UNI-spray pop-up
emission device to deliver plastic material. Xeri-Bubblers and Xeri-Sprays spray head or shrub adapter.
water directly to a plant. These •Barbed side inlet accepts 1⁄4" with 10-32 threads. •Outlet: 10-32 threads that
include Xeri-Bugs, PC Modules, distribution tubing (DT-025 or •Constructed of UV-resistant accept any emission device
Xeri-Bubblers and Xeri-Sprays. PT-025). plastic material. with 10-32 threads including
•Saves time and money when Xeri-Bugs, PC Modules,
•10-32 threaded outlet Operating Range
installing a low-volume Xeri-Bubblers and Xeri-Sprays.
permits easy threading
irrigation system. of 12" (30,5 cm) •Pressure: 0 to 50 psi •Sits at grade when installed in a
•Extremely rugged and polyflex riser (PFR-12). (0 to 3,5 bars) spray head for a robust
reliable-poly-flex riser installation.
Operating Range Model
constructed of thick-walled,
•10-32A Operating Range
high-density polyethylene. •Pressure: 0 to 50 psi
(0 to 3,5 bars) •Pressure: 15 to 50 psi (1,0 to 3,5
Operating Range bars)
•Pressure: 15 to 50 psi Model
Model
(1,0 to 3,5 bars) •RS-025T
10-32A •XBA-1800
PFR/RS
Model RS-025T
XBA-1800
•PFR/RS: 12" (30,5 cm)
polyflex riser and
7" (30,5 cm) stake Landscape Drip / Xerigation®
www.rainbird.com 237
Landscape Drip / Xerigation®
Landscape Dripline
Landscape Dripline
Easy to install, pressure-compensating inline emitter tubing used to
irrigate ground cover, mixed plantings, hedge rows and more.
Features
•Choice of flow rates, spacing and coil lengths provides design
flexibility for a variety of non-turfgrass applications.
•Rain Bird’s patented ADI emitter (Advanced Drip Inline) pressure
compensates by “lengthening” the emitter’s turbulent flow path
instead of reducing the cross-sectional area of the emitter’s flow path.
The result is unsurpassed clog-resistance over the long term.
•Cylindrical shape of Rain Bird’s ADI emitter “welds” to the inner
ADI Emitter circumference of the polyethylene tubing, creating a physical barrier
that keeps the emitter cover and silicone wafer securely in place.
•Cylindrical design of Rain Bird’s ADI emitter provides surface area for
filtration throughout 360° of its inner circumference.
Flow Rate (GPM) per 100 feet of tubing •Dual outlet ports on every Rain Bird inline emitter act in
combination as a micro air vacuum relief valve.
12" 18" 24" •Use an Air Relief Valve Kit when installation is below soil (see p. 240).
.6 1.0 .67 .50 •Accepts Rain Bird Easy Fit Compression Fittings, 16mm barb insert
.9 1.5 1.0 .75 fittings and LOC Fittings.
•Custom Spacing Available; contact a Rain Bird sales representative for
more details.
Operating Range
•Pressure: 8.5-60 psi (0,7 to 4,1 bars)
•Temperature: Up to 100° F (43.3° C) water
How To Specify Up to 125° F (51.7° C) ambient
LD - P - 09 - 12 - 100 •Flow Rates: 0.61 GPH and 0.92 GPH (2,3 l/h and 3,5 l/h)
•Required Filtration: 120-mesh (125-micron)
Length of Tubing
Model 100 = 100' (30,5 m)
Land-
scape
500 = 500' (152,4 m)
250 = 250' (76,2 m)
Specifications
Dripline 1K or 1000 = 1000'
(304,8 m) •Outside Diameter: 0.630" (16 mm)
Optional
Purple Emitter Spacing •Inside Diameter: 0.540" (13,7 mm)
12 = 12" (30,5 cm)
18 = 18" (45,7 cm) •Wall Thickness: 0.045" (1,1 mm)
24 = 24" (61,0 cm)
Flow Rate
06 = .61 GPH (2,3 l/h)
09 = .92 GPH (3,5 l/h)
238 www.rainbird.com
Landscape Drip / Xerigation®
Landscape Dripline
www.rainbird.com 239
Landscape Drip / Xerigation®
Distribution Components
LD 16mm 00-100
Models Model
LD16ELB
•LD16CPLG: Barb x Barb Coupling •AR Valve Kit
•LD16ELB: Barb x Barb Elbow
•LD16TEE: Barb x Barb Tee
•LD16STK: 73⁄4" Barbed Tubing LD16TEE
Plastic Stake
AR Valve Kit
LD16STK
240 www.rainbird.com
Landscape Drip / Xerigation®
Distribution Components
1
⁄ 4" Landscape Dripline N EW
Rain Bird's new 1⁄4" Dripline is a perfect choice for Models
small-sized areas such as planter boxes, container
gardens, loops around trees, vegetable gardens and shrubs. Model Flow at 30 psi Spacing Coil Length
(GPH) (l/h) (in.) (cm) (ft.) (m)
Features LDQ080650 0.8 3,0 6 15,25 50 15,25
•Simple to use, as the flexible tubing makes watering pots and LDQ0806100 0.8 3,0 6 15,25 100 30,50
container gardens easy. LDQ081250 0.8 3,0 12 30,5 50 15,25
• 1⁄4" tubing size complements the aesthetics of any garden. LDQ0812100 0.8 3,0 12 30,5 100 30,5
•Clog resistance through built-in filtration and two outlet holes, 180
degrees apart. Xeri-Bug Emitter Performance
•Brown tubing complements Rain Bird's 1⁄2" Landscape Dripline.
METRIC
•Works with Rain Bird 1⁄4" barbed fittings.
•Comes in 2 spacings (6" and 12") and 2 coil lengths (50' and 100') for 1.2 4,0
1.0 3,5
design flexibility.
Specifications
Maximum Length of Run (Feet)
•Outside diameter: 0.250" (6 mm);
•Inside diameter: 0.170" (4 mm) Emitter Maximum Flow per Ft.
•Wall thickness: .080" (2 mm) Spacing Length of Run @ 15 psi
•6" or 12" spacing LDQ080650 6" 19 feet 1 GPH/ft.
•Available in 50' and 100' coils 12" 33 feet 0.5 GPH/ft.
www.rainbird.com 241
Landscape Drip / Xerigation®
Distribution Components
Operating Range
•0 to 60 psi (0 to 4,1 bars)
Models
•XBS 100: 100 foot (30 m) coil with green striping
•XBS 250: 250 foot (76 m) coil with green striping
•XBS 500: 500 foot (152 m) coil with green striping
•XBS 100P: 100 foot (30 m) coil with purple striping
•XBS 500P: 500 foot (152 m) coil with purple striping
•XBS 100Y: 100 foot (30 m) coil with yellow striping
•XBS 500Y: 500 foot (152 m) coil with yellow striping
NEW •XBS 500W: 500 foot (152 m) coil with white striping
242 www.rainbird.com
Landscape Drip / Xerigation®
Distribution Components
Features MDFCOUP
Operating Range
•Pressure: 0 to 60 psi (0 to 4,1 bars)
•Accepts tubing O.D. of .630" to .710" (16mm-18mm) MDCFCAP
MDCFEL MDCF75MPT MDCF50FPT
Models
EASY FIT FITTINGS
•MDCFCOUP: Coupling
•MDCFEL: Elbow
•MDCDTEE: Tee
www.rainbird.com 243
Landscape Drip / Xerigation®
Distribution Components
Easy Fit Below Grade • 1⁄2" FPT adapter accepts virtually any drip emission device, including
the 12" and 24" Polyflex Riser assemblies (PFR/FRA and PFR/FRA24).
Irrigation Emission Stake •Unique, patent-pending design is manufactured using rugged ABS
Combination stake, coupling and threaded adapter secures system
plastic material for long-lasting durability.
below grade, allowing most of system to be kept out of sight.
1
⁄4" Distribution Tubing 1
⁄4" Distribution Tubing Friction Loss Characteristics
Features O.D. .220" I.D. .160" O.D. 6 mm I.D. 4 mm METRIC
•Extends emitter outlets to desirable discharge locations. Flow Velocity Loss Flow Flow Velocity Loss
GPH fps psi m3⁄h l/h m/s bars
•Fits over barbed outlet ports on all Xerigation emission devices
and 1⁄4" transfer fittings. 1 0.27 0.16 0,00 3,79 0,08 0,01
2 0.53 0.59 0,01 7,58 0,16 0,04
•Made from quality polyethylene or vinyl materials. 3 0.80 1.24 0,01 11,6 0,24 0,09
4 1.06 2.12 0,02 15,14 0,32 0,15
Specifications 5 1.33 3.20 0,02 18,92 0,41 0,22
•Outside diameter: 0.22" (6 mm) 6 1.59 4.49 0,02 22,71 0,48 0,31
7 1.86 5.97 0,03 26,50 0,57 0,41
•Inside diameter: 0.16" (4 mm)
8 2.13 7.64 0,03 30,28 0,65 0,53
9 2.39 9.50 0,03 34,07 0,73 0,66
Models 10 2.66 11.54 0,04 37,85 0,81 0,80
Vinyl Tubing 11 2.92 13.79 0,04 41,64 0,89 0,95
•DT-025-050: 50-foot (15,2 m) coil of 1⁄4" vinyl distribution tubing 12 3.19 16.17 0,05 45,42 0,97 1,12
13 3.45 18.75 0,05 49,21 1,05 1,29
•DT-025-100: 100-foot (30 m) coil of 1⁄4" vinyl distribution tubing 0,05 52,99 1,13 1,48
14 3.72 21.50
•DT-025-1000: 1000-foot (304m) coil of 1⁄4" vinyl distribution tubing 15 3.98 24.43 0,06 56,78 1,21 1,69
•DT-025-1KPPK: Pallet Pack of 1000-foot (304m) coils of 1⁄4" vinyl 16 4.25 27.53 0,06 60,56 1,30 1,90
distribution tubing (32 coils per pallet) 17 4.52 30.80 0,06 64,35 1,38 2,13
18 4.78 34.23 0,07 68,13 1,46 2,36
Polyethylene Tubing 19 5.05 37.83 0,07 71,92 1,54 2,61
•PT-025-050: 50-foot (15,2 m) coil of 20 5.31 41.60 0,08 75,70 1,62 2,87
1
⁄4" polyethylene distribution tubing 25 6.64 62.86 0,09 94,63 2,03 4,34
•PT-025-100: 100-foot (30 m) coil of 30 7.97 88.08 0,11 113,55 2,43 6,08
1
⁄4" polyethylene distribution tubing psi Loss Per 100 Feet of tubing; C=150 bars Loss per 100 Meters of tubing
Note: Use of tubing at flows shown in dark shaded area is not recommended, as velocities
•PT-025-1000: 1000-foot (304 m) coil of
1 exceed 5 ft./sec. (1,5 m/s).
⁄4" polyethylene distribution tubing
Note: Polyethylene tubing recommended for high temperature
and high pressure applications.
DT-025 / PT-025
244 www.rainbird.com
Landscape Drip / Xerigation®
Distribution Components
1 1
⁄4" Barb Transfer Fittings ⁄4" Self-Piercing Barb Connector
Features Features
1
•Used to connect ⁄4" distribution tubing (DT-025 or PT-025) in •Used to connect 1⁄4" distribution tubing into 1⁄2" or
different configurations or attach 1⁄4" tubing to 1⁄2" or 3⁄4" tubing. 3
⁄4" distribution tubing.
•Newly designed connectors have self-piercing barbs that easily •Self-piercing barb inlet is easily inserted into 1⁄2" or 3⁄4" distribution
puncture 1⁄2" or 3⁄4" tubing. tubing using a Xeriman™ (XM-Tool) or Bug Gun.
•Stem on fittings allows simple, quick installation using Xeriman™ Tool •Outlet barb accepts 1⁄4" distribution tubing (DT-025 or PT-025). Gray
(XM-TOOL). outlet barb indicates unit has unrestricted flow.
•Rugged plastic construction.
Operating Range
Operating Range •Pressure: 0 to 50 psi (0 to 3,5 bars)
•Pressure: 0 to 50 psi (0 to 3,5 bars)
Model
Models •SPB-025
•XBF1CONN: 1⁄4" Barb Connector
Inlet
•XBF2EL: 1⁄4" Barb x Barb Ell
•XBF3TEE: 1⁄4" Barb x Barb x Barb Tee Outlet
SPB-025
XBF1CONN XBF2EL XBF3TEE
Operating Range
•Pressure: 0 to 50 psi (0 to 3,5 bars)
TOTE
www.rainbird.com 245
Landscape Drip / Xerigation®
Distribution Components
1
Tubing Goof Plug ⁄4" Mounting Clip Xeri Micro Valves
Features Features Features
•Used to plug unwanted holes •Used to attach 1⁄4" distribution •Micro-sized multi-purpose flow control valves.
in tubing. tubing (DT-025 or PT-025) to •Easily adjust or turn off flow by rotating the ball valve.
•New design works with wood without pinching the
Xeriman™ Tool (XM-TOOL) for tube. Operating Range
a quick, easy installation. •Nail is retained in the clip for •Pressure: 0 to 50 psi (0 to 3,5 bars)
easy installation.
Model •Durable plastic construction. Models
•EMA-GPX
•XMV-1032: 10-32 x 10-32 threads (use with flex risers)
Model
•XMV-025: 1⁄4" barb x 1⁄4" barb (use with DT-025 or PT-025 flexible
•MC-025 distribution tubing)
EMA-GPX
MC-025
XMV-025 XMV-1032
Model
•SEB-6X
SEB-6X
TDS-050 w/bend
246 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
Comes d! XCZ-100-PRF* 1" x 1" 3 – 15 GPM 20 – 120 psi 100-DV 1" Pressure-Regulating RBY Filter 40 psi
le
Assemb
XCZ-100* 1" x 1" 3 – 15 GPM 20 – 120 psi 100-DV 1" RBY Filter 40 psi
XCZ-100-BFF* 1" x 1" 3 – 15 GPM 20 – 120 psi 100-DV 1" Back Flush Filter 40 psi
XACZ-100 1" x 1" 3 – 15 GPM 20 – 120 psi 100-ASVF 1" RBY Filter 40 psi
XCZ-100-B-COM 1" x 1" 3 – 20 GPM 20 – 150 psi 100-PESB 1" Basket Filter 40 psi
HIGH FLOW CONTROL ZONE KIT
NEW XCZ-150-COM 11⁄2" x 1" 15 – 40 GPM 20 – 150 psi 150-PESB 1" Basket Filter (2) 40 psi
*Available with BSP threads
www.rainbird.com 247
Landscape Drip / Xerigation®
Control Zone Components
FILTER TYPE MANUAL FLUSH AUTOMATIC INTEGRATED MANUAL AUTOMATIC INTEGRATED Basket Filter Basket Filter
FLUSH PRESSURE FLUSH PRESSURE (2)
REGULATING REGULATING
INLET X
3⁄4" x 3⁄4" 1" x 3⁄4" 3⁄4" x 3⁄4" 3⁄4" x 3⁄4" 1" x 1" 1" x 1" 1" x 1" 1" x 1" 11⁄2" x 1"
OUTLET SIZE
INLET
PRESSURE 20 psi - 120 psi 20 psi - 120 psi 20 psi–120 psi 20 psi–120 psi 20 psi–120 psi 20 psi–120 psi 20 psi–150 psi 20 psi–150 psi
RANGE
SCREEN 200 Mesh 200 Mesh 200 Mesh 200 Mesh 200 Mesh 200 Mesh 200 Mesh 200 Mesh
OUTLET
30 psi 30 psi 30 psi 40 psi 40 psi 40 psi 40 psi 40 psi
PRESSURE
CHECK
N/A Yes N/A N/A Yes N/A N/A N/A
VALVE
248 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
Control Zone Kits with P/R Filter NEW Minimum Inlet Pressure for 30 psi (2,0 bars) Outlet Pressure
Simplest control zone kits in the industry come assembled for Flow Flow XCZ-075-PRF XCZ-075-PRF
easy installation and reduced maintenance. GPM l/s psi bars
0.2 0,01 34.4 2,4
Shorter kits with only 2 components (valve and new pressure-
1.0 0,06 36.1 2,5
regulating filter) mean that you can fit more control zone kits in
3.0 0,19 38.1 2,6
a valve box, saving time and money.
5.0 0,32 43.4 3,0
Most reliable control zone kits on the market with proven Low
Flow Valve or DV valve and fewer threaded connections which
mean less chance of a leak both at installation and over the life Minimum Inlet Pressure for 40 psi (2,8 bars) Outlet Pressure
of the system.
Flow Flow XCZ-100-PRF XCZ-100-PRF
Operating Range GPM l/s psi bars
•Flow:
3.0 0,19 42.9 3,0
5.0 0,32 44.1 3,0
• 3⁄ 4" units: 0.20 to 5.0 gpm (45,4 to 1136 l/h; 0,01 to 0,32 l/s) 8.0 0,50 46.9 3,2
• 1" units: 3.0 to 15.0 gpm (681 to 3407 l/h; 0,19 to 0,95 l/s) 10.0 0,63 48.5 3,3
•Inlet Pressure: 20 to 120 psi (1,4 to 8,3 bars) 15.0 0,95 55.5 3,8
•Regulated pressure:
• 3⁄ 4" units: 30 psi (2,0 bars)
• 1" units: 40 psi (2,8 bars)
•Filtration: 200 mesh (75 micron)
Models
•XCZ-075-PRF ( 3⁄4" Low Flow Valve + 3⁄ 4" P/R RBY Filter [Assembled] )
•XCZ-100-PRF* (1" DV Valve + 1" P/R RBY Filter [Assembled] )
*Available with BSP Threads
XCZ-075-PRF
XCZ-100-PRF
www.rainbird.com 249
Landscape Drip / Xerigation®
Control Zone Components
Low Flow Kits with Static Wye Filter Minimum Inlet Pressure for 30 psi Outlet Pressure
Complete, economical control zone kits are ideal for use in Flow Flow XCZ-LF-075 XCZ-LF-100 XACZ-LF-075
GPM GPH psi psi psi
residential and small commercial applications.
0.2 12.0 32.0 32.2 35.0
The most reliable kits on the market as they contain the Low 1.0 60.0 32.1 32.5 35.1
Flow DV Valve or the Low Flow Anti-Siphon Valve; these are the 2.0 120 33.8 34.4 36.2
only valves in the industry that can effectively handle low flows 3.0 180 36.3 36.3 38.1
(below 3.0 GPM) without weeping. 4.0 240 40.1 40.1 41.0
5.0 300 46.4 45.0 45.3
Simple, 3-component kits are easily installed and maintained.
Operating Range
•Flow: 0.20 to 5.0 GPM (45,4 to 1136 l/h; 0,01 to 0,32 l/s) Minimum Inlet Pressure for 2,1 bars Outlet Pressure METRIC
•Inlet Pressure: 20 to 120 psi (1,4 to 8,3 bars)
•Filtration: 200 mesh (75 micron) Flow Flow XCZ-LF-075 XCZ-LF-100 XACZ-LF-075
l/hr l/s bars bars bars
•Regulated Pressure: 30 psi (2,1 bars)
45,42 0,01 2,2 2,2 2,4
227 0,06 2,2 2,2 2,4
Models 454 0,13 2,3 2,4 2,5
•XCZ-LF-075 ( 3⁄4" Low Flow Valve + 3⁄4" RBY Filter 681 0,19 2,5 2,5 2,6
+ 30 psi Pressure Regulator) 908 0,25 2,8 2,8 2,8
•XCZ-LF-100 (1" Low Flow Valve + 3⁄4" RBY Filter 1136 0,32 3,2 3,1 3,1
+ 30 psi Pressure Regulator)
NEW •XACZ-LF-075 ( 3⁄4" Low Flow Anti-siphon Valve + 3⁄4" RBY Filter
+30 psi Pressure Regulator)
XCZ-LF-075
NEW
XACZ-LF-075
XCZ-LF-100
250 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
Low Flow Kits with Self-Cleaning Minimum Inlet Pressure for 30 psi Outlet Pressure
Back Flush Filter
Flow Flow XCZ-LF-075-BF XACZ-LF-75-BF
Complete, innovative control zone kits are ideal for use in GPM GPH psi psi
residential and municipal water applications. 0.2 12.0 33.6 35.1
1.0 60.0 34.0 35.2
Contain the Low Flow DV Valve or the Low Flow Anti-Siphon Valve, 2.0 120 34.4 36.5
the only valves in the industry that can effectively handle low flows 3.0 180 36.3 38.3
(below 3.0 GPM) without weeping. 4.0 240 38.8 41.2
5.0 300 45.1 45.4
Reduce maintenance because the revolutionary Back Flush Filter is
self-cleaning and provides cleaning action with every cycle.
Operating Ranges Minimum Inlet Pressure for 2,1 bars Outlet Pressure METRIC
•Flow: 0.20 to 5.0 GPM (45,4 to 1136 l/h; 0,01 to 0,32 l/s)
•Inlet Pressure: 20 to 120 psi (1,4 to 8,3 bars) Flow Flow XCZ-LF-075-BF XACZ-LF-75-BF
•Filtration: 200 mesh (75 micron) l/hr l/s bars bars
•Regulated Pressure: 30 psi (2,1 bars) 45,42 0,01 2,3 2,4
227 0,06 2,3 2,4
454 0,13 2,4 2,5
Models
681 0,19 2,5 2,6
•XCZ-LF-075-BF ( 3⁄4" Low Flow Valve + 3⁄4" BFF 908 0,25 2,7 2,8
+ 30 psi Pressure Regulator + Check Valve) 1136 0,32 3,1 3,1
NEW •XACZ-LF-75-BF ( 3⁄4" Low Flow Anti-siphon Valve + 3⁄4" BFF
+ 30 psi Pressure Regulator)
NEW
XCZ-LF-075-BFF
XACZ-LF-75-BF
www.rainbird.com 251
Landscape Drip / Xerigation®
Control Zone Components
Medium Flow Kits Minimum Inlet Pressure for 40 psi Outlet Pressure
Complete, economical control zone kits are ideal for use in Flow Flow XCZ-100 XCZ-100-BFF XACZ-100
residential and small commercial applications. GPM GPH psi psi psi
3.0 180 43.0 42.5 43.2
The most reliable kits on the market as they contain Rain Bird's 5.0 300 43.8 43.8 44.4
proven DV or Anti-Siphon Valves, recognized as the leaders in 7.0 420 45.7 45.7 45.7
the valve market. 9.0 540 46.9 46.9 46.3
Choose from the economical, robust RBY Filter or the
11.0 660 47.6 48.8 48.8
innovative, self-cleaning Back Flush Filter for maximum
13.0 780 48.8 51.3 52.0
flexibility and ease of maintenance.
15.0 900 50.3 55.1 54.5
Operating Ranges Minimum Inlet Pressure for 2,8 bars Outlet Pressure METRIC
•Flow: 3.0 – 15.0 GPM (681 to 3407 l/h; 0,19 to 0,95 l/s)
Flow Flow XCZ-100 XCZ-100-BFF XACZ-100
•Inlet Pressure: 20 to 120 psi (1,4 to 8,3 bars) l/hr l/s bars bars bars
•Filtration: 200 mesh (75 micron) 681 0,19 3,0 2,9 3,0
•Regulated Pressure: 40 psi (2,8 bars) 1136 0,32 3,0 3,0 3,1
1590 0,44 3,2 3,2 3,2
Models 2044 0,57 3,2 3,2 3,2
2498 0,69 3,3 3,4 3,4
•XCZ-100* (1" DV Valve + 1" RBY Filter + 40 psi Pressure Regulator)
2952 0,82 3,4 3,5 3,6
•XCZ-100-BFF* (1" DV Valve + 1" BFF + 40 psi Pressure Regulator 3407 0,95 3,5 3,8 3,8
+ Check Valve)
•XACZ-100 (1" ASVF + 1" RBY Filter + 40 psi Pressure Regulator)
*Available with BSP threads
XCZ-100
XACZ-100
XCZ-100-BFF
252 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
Medium Flow Commercial Control Zone Kit Minimum Inlet Pressure for 40 psi Outlet Pressure
with Basket Filter
Flow Flow XCZ-100-B-COM
Complete kit is the simplest and most reliable control zone kit GPM GPH psi
for commercial applications. 3.0 180 43.0
5.0 300 44.0
Contains the reliable, proven PESB Valve which provides 7.0 420 45.0
patented scrubbing action, making this kit ideal for commercial 9.0 540 45.5
dirty water applications. 11.0 660 46.2
14.0 840 48.1
Includes the Quick Check Filter that has a clear indicator which 17.0 1020 50.7
goes from green to red, telling you when to clean the filter. This 20.0 1,200 54.0
reduces maintenance and takes the guesswork out of cleaning
the filter. In addition, the threaded top makes it easy to remove
and clean the stainless steel screen.
Minimum Inlet Pressure for 2,8 bars Outlet Pressure METRIC
XCZ-100-B-COM
www.rainbird.com 253
Landscape Drip / Xerigation®
Control Zone Components
11⁄ 2" Control Zone Kit NEW Minimum Inlet Pressure for 40 psi (2,8 bar) Outlet Pressure
Highest flow control zone kit on the market for large, Flow Flow XCZ-150-COM XCZ-150-COM
(GPM) (l/s) (psi) (bar)
commercial drip zones.
15.0 0,95 44.5 3.1
Contains the revolutionary Quick Check Basket Filter for 20.0 1,26 44.9 3.1
reduced maintenance and increased reliability. 25.0 1,58 46.3 3.2
30.0 1,89 48.1 3.3
Comes partially assembled for a simple, quick and 35.0 2,21 50.3 3.5
flexible installation. 40.0 2,52 52.6 3.6
Operating Range
•Flow: 15.0 to 40.0 GPM (3407 to 9086 l/h; 0,95 to 2,54 l/s)
•Inlet Pressure: 20 to 150 psi (1,4 to 10,3 bars)
•Regulated pressure: 40 psi (2,8 bars)
•Filtration: 200 mesh (75 micron)
Models
•XCZ-150-COM (11⁄ 2" PESB Valve + 2 - 1" Basket Filters
+ 2 - 40 psi Pressure Regulators)
XCZ-150-COM
254 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
Allow the filter to be safely placed downstream of the valve Pressure Loss Characteristics METRIC
since these valves handle all sizes of particles.
Flow Flow LFV-075 LFV-100 ASV-LF-075
l/hr l/s bars bars bars
Features
45,42 0,01 0,19 0,19 0,26
•Unique “double-knife” diaphragm coupled with 1⁄2" diameter seat for 227 0,06 0,19 0,19 0,29
flawless operation at low flow rates. 454 0,13 0,24 0,24 0,29
•Low Flow DV Valve available in 3⁄4" and 1" models. 908 0,25 0,26 0,26 0,34
NEW •New 3⁄4" Low Flow Anti-Siphon Valve now available. 1362 0,38 0,30 0,30 0,40
•Double-filtered pilot flow design for maximum reliability. 1817 0,50 0,36 0,36 0,48
•External bleed to manually flush system of dirt and debris during
installation and system start-up.
•Internal bleed for spray-free manual operation.
NEW
Operating Ranges
•Flow: 0.20 – 5.0 GPM (45,42 to 1136 l/h;
0,01 to 0,32 l/s)
•Pressure: 15 to 150 psi (1,0 to 10,3 bars)
Electrical Specifications
•24 VAC 50/60 Hz (cycles/sec) solenoid
•Inrush current: 0.30 (7.2 VA) at 60 Hz
ASV-LF-075
•Holding current: 0.19 A (4.56 VA)
Dimensions
•Height: 41⁄2" (11,4 cm)
•Length: 41⁄4" (10,7 cm)
•Width: 31⁄3" (8,4 cm)
Models
•LFV-075: 3⁄4" Low Flow DV Valve
•LFV-100*: 1" Low Flow DV Valve
NEW •ASV-LF-075:
3
⁄4" Low Flow Anti-Siphon Valve
*Available with BSP threads
www.rainbird.com 255
Landscape Drip / Xerigation®
Control Zone Components
Operating Range
•Flow PRF-075-RBY and PRF-100-RBY
• 3⁄ 4" units: 0.50 to 5.0 GPM (114 to 1136 l/h; 0,03 to 0,32 l/s)
•1" units: 3.0 to 15.0 GPM (681 to 3407 l/h; 0,19 to 0,95 l/s)
•Inlet Pressure: 20 to 150 psi (1,4 to 10,3 bars)
•Regulated pressure:
• 3⁄ 4" units: 30 psi (2,0 bars)
• 1" units: 40 psi (2,8 bars)
•Filtration: 200 mesh (75 micron)
Models
•PRF-075-RBY: 3⁄4" P/R RBY Filter
•PRF-100-RBY: 1" P/R RBY Filter*
•PRF-075-BFF: 3⁄4" P/R Back Flush Filter
•PRF-100-BFF: 1" P/R Back Flush Filter* PRF-075-BFF and PRF-100-BFF
*Available with BSP Threads
256 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
RBY075MPTX
www.rainbird.com 257
Landscape Drip / Xerigation®
Control Zone Components
Models
•BFF075MPT ( 3⁄4" Back Flush Filter with 200 mesh screen)
•BFF100MPT* (1" Back Flush Filter with 200 mesh screen)
*Available with BSP Threads
BFF075MPT
258 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
QKCHK-100
Landscape Drip / Xerigation®
www.rainbird.com 259
Landscape Drip / Xerigation®
Control Zone Components
11/2" With
Spin Plate
Total Differential Pressure (psi)
12
2" With
•SC 200 100 SS (2" 100-mesh, stainless steel)
Spin Plate
10 •SC 200 150 SS (2" 150-mesh, stainless steel)
8 •SC 200 200 SS (2" 200-mesh, stainless steel)
6 11/2" Without 2" Without •SC 100 100 (1" 100-mesh, stainless steel) for 1" Automatic Filter
Spin Plate
4
Spin Plate Kits only (AF-100-LSS)
2 •SC 100 150 (1" 150-mesh, stainless steel) for 1" Automatic Filter
0
Kits only (AF-100-LSS)
20 40 60 80 100 120
Flow (GPM)
•SC 100 200 (1" 200-mesh, stainless steel) for 1" Automatic Filter
Kits only (AF-100-LSS)
How To Specify
RBY - XXX - C - LSS
LSS
Model LSS = Less
Stainless
Steel Screen
Commercial Grade
260 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
How To Specify
AF150 - LSS*
LSS
Less Stainless Steel Screen
Model
AF: Automatic Filter (NPT)
* Stainless steel screen mesh SC100, SC150 or
AF100-LSS AF150-LSS AF200-LSS SC200 must be specified/ordered separately
www.rainbird.com 261
Landscape Drip / Xerigation®
Control Zone Components
CV-075 Model
•XRTRO DST PK
XRTRO DST PK
Landscape Drip / Xerigation®
262 www.rainbird.com
Landscape Drip / Xerigation®
Control Zone Components
Operating Range
•Flow: 0.50 to 4.00 GPM (0,11 to 0,91 m3⁄h; 0,03 to 0,25 l/s)
•Inlet Pressure: 15 to 70 psi (1,0 to 4,8 bars) Rugged, UV-resistant
•Regulated Pressure: 30 psi (2,0 bars)
RETRO-1800 1800 body
•Filtration: 200 mesh (75 micron)
Model
•PRS-050-30
PRS-050-30
www.rainbird.com 263
Landscape Drip / Xerigation®
Control Zone Components, Tools, Literature
XBV-075 XM-TOOL
PPC-200X
EMA-BGX
264 www.rainbird.com
Spray Heads
Rotary Nozzles
Accessories
Rotors
Impacts
Valves
Controllers
offers a wide range of accessories that not only help to make you more efficient, but more Commercial
Pump Stations
comfortable as well, when tackling projects of every shape and size. Extending beyond
knee pads and totes, Lake Management Aerators provide solutions for water sources that
are ecologically out of balance. Practically anything you need, whenever you need it,
Landscape Drip/
Xerigation
Rain Bird has you covered.
Install Confidence. ™
®
Install Rain Bird Accessories.
Accessories
Resources
& Training
Reference
Accessories
Models
•PHEN-075SH: Shower Pro -
3
⁄4" (20/27) hose thread
PHEN-075P PHEN-075SH
WS KP-1
TOWEL18PTFE
TEFLON-050
Accessories
266 www.rainbird.com
Accessories
IS Series
Rain Bird Irrigation Supplement - Temporary or supplemental
irrigation for indoor and outdoor plant use
Features
•All natural, non-toxic, harmless to humans and pets and 100%
degradable. IS-QT
•Helps new transplants become established in existing landscapes.
-Existing vegetation is not subjected to over-watering while trying IS-QT-SL
to establish the new plant, and the new plant has its own source of
water until it becomes established.
•The Perforated Tube and Gel Pack (ISPT) provides an alternate
delivery mechanism allowing fewer units per plant providing three
times the moisture therefore lasts 30 days. NEW
-The increase in moisture delivery allows for longer intervals
between watering cycles for containerized plants, hanging baskets
and streetscapes.
•Disperses water at a consistent rate with a 90-day or a 30-day
application.
-Bacteria naturally found in soil gradually break down the food
grade ingredients and convert RBIS back into liquid water at a
consistent and steady release rate. With the amount of surface area
of the gel exposed to the soil bacteria, the IS-QT and IS-TG deliver
moisture up to 90 days. The IS-PT allows more surface area IS-TG
exposure through the perforations to deliver moisture at a faster
rate for a period of 30 days. IS-PT
•The 2” Gel Pack is designed for easy application requiring no
repotting.
-IS-GP30 is the preferred product for use in seasonal plants, small
hanging baskets and window boxes.
•Provides moisture around the clock to the root zone.
-The capillary activity in the soil carries and maintains moisture
throughout the root zone for an extended period of time.
•Rain Bird Irrigation Supplement eliminates evaporation, run-off, and
leaching through this efficient, sub-surface, slow release delivery
method.
•Requires little to no maintenance and disperses moisture around
the clock. IS-GP
IS-GP30
Accessories
www.rainbird.com 267
Accessories
IS Series (continued)
18" 45.72 6-9 2 • The amount of units used can be adjusted for extreme dry or wet climate conditions.
20" 50.8 9-10 3 • Excessive heat, wind, and plants with extensive foliage or fruit will require additional watering.
• Irrigation supplement is designed to significantly reduce the time between watering cycles for container
24" 60.96 NA 4 plants.
32" 81.28 NA 6 • The frequency at which you will apply water will depend on the climate and the plant materials.
36" 91.44 NA 8 • Plants in above ground containers dry out faster than those planted in the ground. When IS is used in this
48" 121.92 NA 12 manner, additional watering will be needed.
• Users are advised to observe plants for any signs of stress, then water immediately to avoid damage to plant.
Accessories
268 www.rainbird.com
Accessories
LM Series Models
Single Pattern Lake Management Aerators •LM10: Principal feature is a one-plume geyser-like spray pattern that
rises high into the air.
Effectively work to maintain an ecological balance in lakes or •LM11: Well proportioned fan-shaped spray, it a perfect balance of
ponds less than 15 feet (5 m) deep. form and function.
•LM20: The dual spray pattern operates at a lower pumping rate.
Keep lakes and ponds beautiful by stimulating vertical circulation
and adding dissolved oxygen to the water. •LM30: Differentiating feature is its multi-dimensional three plume
design.
Maintain sufficient water quality that prevents undesirable algae
build-up, over-growth of weeds, unpleasant odors and depleted Optional Features
fish population. •3-light set systems run on 12-volt power and are available with
65-watt halogen bulbs.
Features •Colored lenses in red, blue, green and yellow.
•Available in 1 - 5 HP pumps, single and three-phase. •Intake screen is optional for LM11.
•All LM units are factory assembled, delivered ready to install. * 10 gage underwater cable ordered separately in 25 foot increments.
•Heavy-duty 304 stainless steel arms support a float filled with US
Coast Guard-approved closed cell foam, for maximum buoyancy.
•Stainless steel housing contains a custom-built electric motor,
designed to move high volumes of water and provide years of
dependable service.
•Unique pumping chamber attachment on the motor housing allows
high pumping rates for maximum circulation.
•Deflector plate provides an appealing display.
•Fine mesh screen prevents the intake of debris to allow the
continuous flow of incoming water, and ensures full and symmetrical
spray patterns when in operation.
•LM11 only - virtually unbreakable stainless steel chopper-style prop.
•Specially designed float rings allow the unit to ride level in the water.
Specifications
•Unit: Manufactured of corrosion-resistant, 18-8 stainless steel and
high-density thermal plastics. Corrosion resistance allows unit to be LM11
installed in almost all water source types.
•Float: Green exterior shell is made of high-density thermal plastic
polyethylene. The interior of the float is closed-cell polyethylene.
•Motor: Custom-built electric motor with dynamically balanced
rotors. Encased in a stainless steel housing that is completely hidden
from view.
•Cable: All units are shipped with underwater cable, ordered
separately with 50 feet minimum, in 25 foot increments.*
•Screen: 1⁄4" nylon fine mesh water intake screen for LM10, LM20 and
LM30 models only.
•Power Control Center: Nema 3R rated control center includes ground
fault interrupt; magnetic starter; surge arrestor; power disconnect;
24-hour on/off timer.
•Warranty: Backed by Rain Bird® Customer Satisfaction Warranty.
•Safety Testing: Components UL and CSA listed; assembly tested and
approved by ETL, ETL-C and CE.
LM20
Accessories
www.rainbird.com 269
Accessories
Models
•LMM: Adjust the diffuser ring to change the pattern from
LM10, 11 or 20.
Optional Features
•2-light set systems run on 12-volt power and are available with
20-watt halogen bulbs. Stainless steel mounting brackets facilitate
installation to achieve a variety of illumination effects.
•Colored lenses in red, blue, green and yellow.
* 12 gage underwater cable ordered separately in 25 foot increments.
Accessories
270 www.rainbird.com
Spray Heads
Rotary Nozzles
Impacts
Valves
Controllers
Rain Bird offers a range of resource and learning tools specifically designed to elevate
your understanding about a variety of topics that will help to make what you do for a
Landscape Drip/
Xerigation
Accessories
Resources
& Training
Reference
Resources & Training
Office Features:
•Contact management: Schedule reminders for appointments,
service calls and vehicle maintenance.
•QuickBooks Integration: Rain Bird CMS Pro will import customer
information from QuickBooks 2003 or higher, allowing to maintain
your customer database. It's able to pull and send customer,
inventory, estimate, account balance, and employee information
eliminating duplication.
CMS Pro
Paperless •
One-time and Recurring Scheduling •
Extensive Customer Database •
Database Backup •
Reminder System •
Multiple Calendars •
Location Maintenance •
Work Order Maintenance •
Service Maintenance •
Technician Maintenance •
Product Maintenance •
Employee Maintenance •
PDA Interface •
Work Order Screen- Field Remarks and Messaging •
Crew Schedule Immediate Time Card Capture •
In-Field Invoicing •
In-Field Estimates •
Estimate Maintenance •
One-Touch QB Invoicing •
One-Touch QB Timesheets •
Fleet Management •
Paperless Field-to-Office System •
90-Day Warranty •
Tech Support Free! Unlimited!
Updates Free! Unlimited!
Call Logging Add-On Available
ProfitMaxx™ Management Reports Available
272 www.rainbird.com
Resources & Training
www.rainbird.com 273
Resources & Training
274 www.rainbird.com
Resources & Training
Spray Head, Rotor & Valve Troubleshooting - 4 Hours Irrigation Contractor Course - 2 Days
This practical, hands-on class is a must for maximizing day-to-day This course deals directly with the issue of wise water management.
efficiency and long-term reliability of your customer's systems. Learn Students learn how to perform field tests on irrigation systems to
the most effective ways to troubleshoot spray heads, rotors and determine their efficiency, and how to combine plant water use, soils
impacts and begin with a thorough examination of valve operations. and local weather data to calculate accurate water schedules. Also
This class is tailored to bring entry-level personnel up to speed quickly included is a review of advanced soil water plant relationships,
and provide several refresher tips for more experienced professionals. advanced hydraulics, pumps, job safety requirements, national codes
affecting our industry, scheduling, water conservation, and system
Basic Hydraulics and Design - 4 Hours uniformity and efficiency details. This class is designed to refresh
Professionals walk you through step-by-step methods of the irrigation irrigation contractor skills; may also serve as a good review for the
design process, from basic hydraulics to calculating system Irrigation Association CIC exam.
requirements. Learn techniques for sprinkler layout, calculating
precipitation rates and irrigation scheduling. This class is tailored to Spanish Phrases for English Speakers - 4 Hours
bring entry-level personnel up to speed quickly and provide several Communication is key when working with sub-contractors and work
refresher tips for more experienced professionals. crews. The last thing you need is a language barrier when a job has to
be finished quickly and efficiently. This course covers basic Spanish
Intermediate Design - 1 Day phrases commonly used and needed in the Green Industry.
The key to popularity of this course is its "practice what you learn"
approach. Throughout the day, there is the opportunity to perform Intelligent Use of Water - 4 Hours
practical exercises in residential design and drip design applications. The need to conserve water has never been greater. Through
Gain and reinforce the following concepts: experience and case studies, we can make every drop count. This class
• Hydraulics provides an overview on how to use water intelligently in the following
• Determining irrigation requirements areas: Proper soil types and structure, type of plants, water efficient
irrigation products, sensors and moisture equipment, assessing
• Selecting sprinklers and spacing ranges
irrigation systems, auditing and basic water scheduling.
• Locating valves
• Proper layout of valve groups Authorized Service Center Program Courses
• Sizing pipe and valves Developed to enhance after-sales service of Rain Bird products, the
• Calculating system pressure requirements Authorized Service Center (ASC) program has three training levels:
• Site location of controllers
ASC Basic Level - 2 Days
• Preparing a final irrigation plan
Basic ASC level is achieved by completing Electrical Troubleshooting,
Controller Programming & Troubleshooting, Spray Head, Rotor & Valve
Landscape Drip/Xerigation - 4 Hours Troubleshooting, and Basic Hydraulics and Design (see descriptions)
This class provides hands-on practice and insight on how to efficiently or attending Professional Irrigation Training Camp events (PITC). Call
design and install effective landscape drip irrigation systems. for more details.
Attendees learn the four key elements of drip design: system layout,
system hydraulics, product selection, and scheduling. Don't let drip ASC Premium Level - 2 Days
irrigation design confuse you; it can be a dynamic water saver and Take your knowledge of controllers and your repair skills to the next
problem solver. level of sophistication with this intensive course. Training begins with
the basics of electronics theory and component identification, along
Bidding & Estimating/Contract Writing - 4 Hours with how to read schematics and soldering techniques. This course
This course combines two essential aspects of winning jobs: contract focuses on electromechanical and solid-state controller repairs.
writing with bidding and estimating. Show customers your company ASC Technical Repair Center - 1 Day
is a professional contender for their landscape and irrigation business
Become one of the best in the field of controller repair with this course
by providing a clear and concise contract. Sample contracts will be
by studying advanced solid-state controller troubleshooting and circuit
discussed. The class includes general pricing, warranties, customer
board-level repair.
service, marketing strategies, pricing, and profits. Several industry
standard-pricing methods will be discussed.
www.rainbird.com 275
Resources & Training
276 www.rainbird.com
Resources & Training
We Offer:
•Facilities and capabilities for overhaul and repair
•Diagnostic Services & Repair
•Pump Start-Up
•Preventative Maintenance
•Emergency Repairs
•Support & Maintenance Plans
•Installation Support
•On-Site Training
•Winterization Service & Spring Start-Up
•Pump Equipment Evaluations
www.rainbird.com 277
Resources & Training
278 www.rainbird.com
Resources & Training
www.rainbird.com 279
Resources & Training
How to Order
•Contractors order through
Rain Bird Rewards:
rainbird.com/rewards
or 1-888-370-1814
•Reference number: various
280 www.rainbird.com
Resources & Training
Smart Way to a Beautiful Landscape Door Watering the Old Fashioned Way Direct Mailer
Hanger Contractors can make a clear case to homeowners for a professionally
installed automatic sprinkler system. This two-way mailer compares
A professionally installed automatic sprinkler system is clearly the way
the ease, convenience, and water savings of an automatic system to
to go. Contractors can affix a label with company contact information
the hose-end watering.
and use these door hangers to deliver this sales message to
homeowners. Specifications
Specifications •33⁄4" wide x 9" high
•5' wide x 12” high •Opens to 4-panel spread
•Full color •Tear-off reply card for a free estimate
•Tear-off reply card for a free estimate •You affix your company label as return mail address on reply card
•You affix your company label as return mail address on reply card •Full color
•Packs of 50 How to Order
How to Order •Contractors order through
Rain Bird Rewards:
•Contractors order through
rainbird.com/rewards
Rain Bird Rewards:
or 1-888-370-1814
rainbird.com/rewards
or 1-888-370-1814 •Reference number: D38535B
•Reference number: D38616C
www.rainbird.com 281
Resources & Training
How to Order
• Item number: D37251
Landscape Irrigation
Training CD-ROM Spec Draw CD-ROM
System Requirements
•Mac or PC with CD ROM drive
How to Order
•Item number: D39445
282 www.rainbird.com
Spray Heads
Rotary Nozzles
Reference
Rotors
Impacts
Valves
Controllers
Chart after chart, Rain Bird eliminates the guesswork and makes it easier to quickly locate Central Controls
the information you need to expertly and efficiently select the right irrigation
Commercial
Pump Stations
Landscape Drip/
Xerigation
Accessories
Resources
& Training
Reference
Reference
F4-FC-NP
Water Irrigation System1 F4-PC-NP
F4-FC-SS-NP Quick Coupling Valves with
F4-PC-SS-NP Locking Purple Covers:
Maxi-Paw NP Covers
™
33DNP, 44NP and 5NP
2045A Maxi-Paw-NP
2045A Maxi-Paw-SAM-NP 8005 NP Cover
(8005 Series)
BPE-NP-HAN
(NP Handles for 3" BPE 7005 NP Cover
and BPES valves) (7005 Series)
5500 NP Cover
(5500 Series)
VB-JMBP 5000 NP Cover Purple Flush Cap
(Jumbo Box (5000/5000 Plus Series)
& Purple Lid) with Fitting
3500 NP Cover
(3500 Series)
VB-JMBP-H
(Jumbo Box &
Purple Lid + Lock)
PA-8S-NP
(Plastic Shrub Adapter)
XCZ-100-B-COM
(1" Control Zone Kit)
MDCFPCAP/
MDCFCOUP
Non-potable Black Stripe (Purple Flush
Water Source Tubing with Cap with Fitting)
VB-10RNDP
(10" Round Box PEB-NP-HAN1 Emission
& Purple Lid) (NP Handles for 1" PEB
and PESB valves) Devices
VB-10RNDP-H PEB-NP-HAN2
(10" Round Box & (NP Handles for 1 1/2" & 1
System drawing is for illustration purposes only.
Purple Lid + Lock) 2" PEB and PESB valves)
Reference
284 www.rainbird.com
Reference
Reference
www.rainbird.com 285
Reference
2. Determine the secondary current requirement of the controller 1. From secondary current requirement chart, maximum secondary
only and the master valve (if a master valve is being used). current allowable:
3. Calculate the remaining current available for valve operation: RC-7C = 1.5 Amps
maximum secondary current allowable minus the current for
controller master valve.
2. Secondary current requirement for controller and master valve:
Reference
286 www.rainbird.com
Reference
Friction Loss Characteristics
Reference
www.rainbird.com 287
Reference
Friction Loss Characteristics
Reference
288 www.rainbird.com
Reference
Friction Loss Characteristics
Reference
www.rainbird.com 289
Reference
Friction Loss Characteristics
Reference
290 www.rainbird.com
Reference
Friction Loss Characteristics
Reference
www.rainbird.com 291
Reference
Friction Loss Characteristics
Reference
292 www.rainbird.com
Reference
Friction Loss Characteristics
Reference
www.rainbird.com 293
Reference
Friction Loss Characteristics
Reference
294 www.rainbird.com
Reference
AWWA Standard
Reference
www.rainbird.com 295
Reference
Warranties
Implied warranties of merchantability and fitness, if applicable, Filtration system controllers - 3 years.
are limited to one year from the date of sale.
Lake Management Aerator: LM10, LM11, LM20, LM30 - 5 years
We will not, under any circumstances be liable for incidental or Lake Management Aerator: LMM - 2 years
consequential damages, no matter how they occur.
Lake Management Aerator Lights - 1 year
All other turf products - 3 years. IV. All Other Products - 1 year.
Reference
296 www.rainbird.com
Reference
Notes
Notes
Reference
www.rainbird.com 297
Reference
Notes
Notes
Reference
298 www.rainbird.com
Reference
Notes
Notes
Reference
www.rainbird.com 299
Reference
Notes
Notes
Reference
300 www.rainbird.com
Reference
Notes
Notes
Reference
www.rainbird.com 301
Reference
Notes
Notes
Reference
302 www.rainbird.com
Reference
Notes
Notes
Reference
www.rainbird.com 303
Reference
Notes
Notes
Reference
304 www.rainbird.com
The
Intelligent
Use of Water ™
Rain Bird Corporation Rain Bird Corporation Rain Bird International, Inc.
970 West Sierra Madre Avenue 6991 E. Southpoint Rd., Bldg.#1 145 North Grand Avenue
Azusa, CA 91702 Tucson, AZ 85706 Glendora, CA 91741
Phone: (626) 812-3400 Phone: (520) 741-6100 Phone: (626) 963-9311
Fax: (626) 812-3411 Fax: (520) 741-6522 Fax: (626) 963-4287