Documente Academic
Documente Profesional
Documente Cultură
9300-USBS
CONTENT
1. Introduction---------------------------------------------------------------------------------2
2. Package
Content--------------------------------------------------------------------------2
3. Product
Features--------------------------------------------------------------------------2
4. System
Requirements-------------------------------------------------------------------2
5. Driver
Installation------------------------------------------------------------------------- 3
5.1
5.2
5.3
5.4
6. Setting
Up
the
------------------------------------------12
RS232
Serial
Device
7. Trouble
shooting-------------------------------------------------------------------- -----13
8.
Disclaimer-----------------------------------------------------------------------------------13
9. FCC
Statement----------------------------------------------------------------------------13
1. Introduction
Congratulations on your purchase of the USB-Serial adapter. This device provides a
simple and easy way to connect Universal Serial Bus (USB) and Serial port interface.
With the advantage of USB port, users have the capability to utilize the peripheral with
serial port interface in an easy to use environment such as plug and play & hot swap
function. This adapter is designed for ideal connections to Cellular Phone, Digital
Camera, Modems or ISDN terminal adapter with over 120k bps data transfer rate.
The USB-Serial adapter and software drivers are capable of providing a no-firmwarechange feature that enable USB interface to be transparent to serial port peripherals
with minimum modifications.
2. Package Content
3. Product Features
4. System Requirements
PC
5. Driver Installation
5.1
5.1.3 Select Search for the best driver for your device
(Recommended), then click Next to continue.
5.1.4 Insert the USB-Serial adapter software driver into the CD-ROM drive
and select Specify a location and type the
D:\Driver\Windows\Win98_ME in the dialogue (D: represents CDROM)
5.1.5 Windows will detect the driver (ftdibus.inf) and show the Comm
Port. Click Next to continue installation.
5.1.6 Click Next to continue and let Windows copy the needed files to your
hard disk.
already installed, you can see a USB to Serial Port (COM3) under
the Ports (COM & LPT) and a USB-to-serial Com Port under the
Universal Serial Bus Controller.
5.2
5.2.3 Windows will detect the driver (FTDIBUS.INF) and show the USBto-Serial Comm Port.
5.2.5 After install the driver, you have to check the Control
Panel-System-Device Manager to make sure the driver has
already installed, you can see a USB to Serial Port (COM3) under
the Ports (COM & LPT) and a USB-to-serial Com Port under the
Universal Serial Bus Controller.
5.3
5.3.5 Windows will detect the driver (FTDIBUS.INF) and Click Next to
continue.
5.4
5.4.4 The windows will auto detect the device (FTDI USB-to-Serial Comm
Port) and install the driver into your system.
5.4.6 After install the driver, you can see a new USB-to-Serial Comm Port
(COM4) under the Ports (COM&LPT).
Modems. Open Modems Properties, select the Modem, and click Properties. In
General tab, please change the Port value to USB to Serial Port (COM3).
6.4 After finishing these processes, you can use USB to Serial Bridge Cable to
connect RS232 Serial 56K FAX Modem and execute the Dial-up function to
connect Internet, and send the FAX with the FAX software (i.e.: Microsoft FAX)
properly.
10
7. Trouble Shooting
If you can successful install the driver but cannot use the USB-Serial Adapter with
connect the other device:
Go to the Control Panel-System-Device Manager and check the COM
(COM&LPT), if you cannot see this item:
7.1 Please check the BIOS setting I/O configure setting Onboard serial
port 1, choose the setting is enabled and choose the value. Then return to the
windows and check it again.
7.2 Go to the Control Panel Add New Hardware, following the step and
choose the hardware from the list, select the Ports(COM&LPT) and following
the step to install the driver that is needed.(In this process you may need to
put the WINDOWS CD into the CD-ROM drive.)
8. Disclaimer
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding
the accuracy and completeness of this document and shall in no event be liable for
any loss of profit or any other commercial damage, including but not limited to
special, incidental, consequential, or other damages.
USB to Serial Adapter Users Manual
11
12