Documente Academic
Documente Profesional
Documente Cultură
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
Options ......................................................................................................................................8
2.9.1
2.9.2
4.2
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.3
4.3.1
4.3.2
4.3.3
Operation status............................................................................................................................................ 26
2 General information
In this section, you can find the following general information on Intel Data Migration Software.
2.1
Intel Data Migration Software provides a set of powerful and easy-to-use hard disk utilities. The
Clone Disk Wizard will transfer all contents from one disk to another hard disk drive, and the Add
New Disk Wizard will help you to add a new hard disk to your computer.
If you are going to install a new hard disk drive,Intel Data Migration Software will help you to
transfer information from the old one in minutes, including operating systems, applications,
documents, and personal settings. After migrating to the new hard disk you can destroy all
confidential information on the old one securely. This is the recommended procedure if you intend
to donate, throw away, or sell the old hard disk drive.
Wizards and a Windows Vista-style interface will make your work easier. Just perform a few simple
steps and let Intel Data Migration Software take care of everything else! When a system problem
occurs, the software will get you up and running in no time.
2.2
The hardware requirements of Intel Data Migration Software correspond to the minimum
requirements for the operating system installed on the computer to be used for running Intel Data
Migration Software. In addition Intel Data Migration Software requires the following hardware:
Intel SSD
256 MB RAM
Windows XP SP3
including Linux. The only exception is the Intel-based Apple Macintosh, which is currently not
supported in native mode.
Supported file systems:
FAT16/32
NTFS
If a file system is not supported or is corrupted, Intel Data Migration Software can copy data using a sector-bysector approach.
2.3
Program workspace
Starting Intel Data Migration Software takes you to the Welcome screen. This screen provides quick
access to practically all the program's functionality.
Clicking the items in the right pane takes you to the corresponding wizard or screen where you can
either start the selected task or function right away or make further selections.
All the features listed in the right pane are duplicated on the left side of the screen occupied by the
so called sidebar. The sidebar also provides easy access to all functionality of Intel Data Migration
Software. The main functions are listed in the lower part of the sidebar. If you choose an item in the
lower part, the upper part of the sidebar displays subitems related to the chosen item (if any) and
the right part of the main window shows detailed information for the current subitem or a list of
options available for that subitem.
Status bar
At the bottom of the main window, there is a status bar that briefly describes the selected operation
or screen. If you select a task or log, the status bar will show information on the selected item.
We will not bore you with a description of other screens, because many of them are self-explanatory
and some are described in the appropriate chapters of this guide. In addition, all screens have brief
descriptions of the features they allow to access or use and you can always open contextual help by
clicking the corresponding button.
By the way, you can also select all the features through the main program menu, which is always at
your disposal on the toolbar.
2.4
Technical Support
2.5
Support for Intel Data Migration Software users is provided by Intel. Please visit Intel's Support page
at http://www.intel.com/go/ssdsupport/.
You can upgrade Intel Data Migration Software to Acronis True Image Home 2010 from the Acronis
web site.
The following features will be available only after upgrading to Acronis True Image Home 2010:
Acronis Try&Decide
Disk/partition backup
Disk/partition restore
Nonstop backup
Online backup
Application backup
Data restore
Mounting images
Scheduling
Archive protection
Cleanup utilities
Consolidating backups
Notifications.
2.6
When you need help from Intel support team, in most cases information about your system is
necessary for resolving your problem. Sometimes getting the information is an inconvenient process
and may take a long time. The tool simplifies the procedure. It generates a system report containing
all the necessary technical information and allows you to save the information to file. When its
5
necessary, you can attach the created file to your problem description and send it to Intel support
team to simplify and speed up the search for a solution.
To generate a system report:
Press the ALT key, and on the Help menu, click Generate System Report, or
On the main program window click the Help arrow, and select Generate System Report, or
Press CTRL+F7. Note that you can use the key combination even when Intel Data Migration
Software is performing any other operation.
After the report is generated:
To save the generated system report to file, click Save As and in the opened window specify a
location for the created file.
To exit to the main program window without saving the report, click Cancel.
You can place the feature on a bootable media as a specific component to be able to generate a
system report when your computer cannot boot up. After you boot up from the media, you will be
able to generate the report even without running Intel Data Migration Software. In this case you
should plug in a USB flash drive before clicking the component icon. The generated report will be
saved on the USB flash drive.
To place Intel System Report on a bootable media:
Select the Intel System Report check box on the Bootable Media Content Selection page of the
Intel Data Migration Software Media Builder wizard
2.7
You can run Intel Data Migration Software from an emergency boot disk on a bare-metal system or a
crashed computer that cannot boot. You can even back up disks on a non-Windows computer,
copying all its data into the backup archive by imaging the disk one sector at a time. To do so, you
will need bootable media that has a copy of the standalone Intel Data Migration Software version
installed on it.
If you purchased Intel Data Migration Software on the Web or as a download from a retailer, you can
create bootable media using the Bootable Media Builder. For this, you will need a blank CD-R/RW, a
blank DVD+R/RW or any other media from which your computer can boot, such as a Zip drive.
Intel Data Migration Software also provides the ability to create an ISO image of a bootable disc on
the hard disk.
If you have chosen not to install the Bootable Media Builder during Intel Data Migration Software installation,
you will not be able to use this feature.
***
When booting from the Bootable Media, you cannot perform backups to disks or partitions with Ext2/Ext3,
ReiserFS, and Linux SWAP file systems.
1. Choose Create Bootable Media in the Tools menu. You can also run the Bootable Media Builder
without loading Intel Data Migration Software by choosing Programs Intel Intel Data
Migration Software Bootable Media Builder from the Start menu.
2. Select which components of Intel programs you want to place on the bootable media.
Intel Data Migration Software offers the following component:
Intel Data Migration Software full version
Includes support of USB, PC Card (formerly PCMCIA) and SCSI interfaces along with the storage
devices connected via them, and therefore is strongly recommended.
In the next window you can set Bootable Media Startup Parameters in order to configure
bootable media boot options for better compatibility with different hardware. Several options
are available (nousb, nomouse, noapic, etc.). All the available startup parameters are listed in
Appendix D. Startup Parameters. These parameters are provided for advanced users. If you
encounter any hardware compatibility problems while testing boot from the bootable media, it
may be best to contact Intel Technical Support.
You may opt for automatic start of the bootable media creation. In this case select the Start
automatically after X seconds box and specify the number of seconds (maximum 100 seconds).
To find out more about components of other Intel products, see their respective user guides.
3. Select the type of bootable media (CD-R/RW, DVD+R/RW or 3.5 diskettes) to create. If your BIOS
has this feature, you can create other bootable media such as removable USB flash drives. You
can also choose to create a bootable disk ISO image.
When using 3.5" diskettes, you will only be able to write one component at a time (for example, the full
version of Intel Data Migration Software) on a set of diskettes. To write another component, start Bootable
Media Builder again.
4. If you are creating a CD, DVD or any removable media, insert a blank disc so the program can
determine its capacity. If you choose to create a bootable disc ISO image, specify the ISO file
name and the folder in which to place it.
5. Next, the program will estimate how many blank diskettes are required (in case you have not
chosen ISO or CD/DVD) and give you time to prepare them. When you are finished, click Proceed.
After you create a boot disc, mark it and keep it in a safe place.
Please keep in mind that the backups created by the later program version may be incompatible with
the previous program versions. Due to this reason, we strongly recommend that you create a new
bootable media after each Intel Data Migration Software upgrade. One more thing you should
remember when booting from the bootable media and using a standalone version of Intel Data
Migration Software, you cannot recover files and folders encrypted with use of the encryption
feature available in Windows XP and Windows Vista operating systems. For more information see
File-level security settings. On the other hand, backup archives encrypted using the Intel Data
Migration Software encryption feature can be recovered.
2.8
Choose columns
You can select the columns to be displayed, by checking the appropriate column names.
Use the Move Up and Move Down buttons to change the display order of the selected column.
Click OK to apply the changes.
Click Cancel to quit this window without saving your settings.
2.9
Options
You can customize the options settings preset during installation of Intel Data Migration Software.
The specified settings will be used by default for future tasks.
You can customize the following options of Intel Data Migration Software:
Appearance
You can always revert the changed settings to their default values.
To reset all the customized options to the default values click Reset all to default.
To reset the current option settings to the default values click Reset the current to default.
2.9.1
The Appearance window contains two panels: the left one features the categories, while the right
one the selected category parameters.
2.9.2
Font properties
You can set up the font properties for the product interface items.
To set up the font properties:
Application - font used for all application items (toolbars, sidebars, wizards, message texts, etc.),
except the menu commands. By clicking the ... button you can preview and choose the desired
application font (its name, style and size).
Menu commands - font used for the menu commands. By clicking the ... button you can preview
and choose the font for the menu commands (its name, style and size).
Intel Customer Experience Program (CEP) is a new way to allow Intel customers to contribute to the
features, design and development of Intel products. This program enables our customers to provide
us with various information, including information about the hardware configuration of your host
8
computer and/or virtual machines, the features you use most (and least), and the nature of the
problems you face. Based on this information, we will be able to improve the Intel products and the
features you use most often.
If you choose to participate, the technical information will be automatically collected every 90 days.
We will not collect any personal data, like your name, address, phone number, or keyboard input.
Participation in the CEP is voluntary, however, but the end results intended to provide software
improvements and enhanced functionality to better meet the needs of our customers.
Note that you will be able to leave the program any time.
Click the Learn more link to read the participation terms.
To make a decision:
Choose Yes, I want to participate in the program if you want to join the program
Choose No, I do not accept if you do not want to join the program
Event Calendar
The color marks in the event calendar show information about the days with scheduled tasks,
successfully completed tasks, tasks completed with errors, as well as the current day.
The left and right arrows buttons at the sides of the calendar allow you to browse the months being
shown in the calendar.
Event log
To view the logs for a specific period, select the period by clicking the right arrow buttons in the To:
and From: fields of the Show logs by period area. Clicking the arrow in the From: field opens a popup calendar where you can set the start day of the period by double-clicking the appropriate day.
Then set the end day using the same procedure for the To: field. You can change the months and
years in the pop-up calendars using the left and right arrows at the month name area. In addition,
you can enter the start and end dates of the desired period directly in the fields. If you would like to
see all the logs, click the Show all button.
To delete a log entry, select it and click the Delete the selected log entry icon. To delete all log
entries click the Delete all log entries icon. You can also save a log entry to file by clicking the
appropriate icon.
If any step was terminated by error, the corresponding log will be marked with a red circle with a
white cross inside.
The right pane features the list of steps contained in the selected log. The three buttons to the right
control message filters: the white cross in the red circle filters error messages, the exclamation mark
in a yellow triangle filters warnings, and the i in the blue circle filters information messages.
To sort messages by a particular parameter, click its header (click again to reverse the order).
Furthermore, you can change column width by dragging the borders with a mouse.
To better view the details of the current step, you can hide the calendar by clicking the Up arrow at
the top right of the calendar pane. This will enlarge the Details area at the bottom of the right pane.
To view the calendar again, click the Down arrow at the top right of the calendar pane.
10
Protection tools:
Intel Data Migration Software Media Builder
Allows you to create a bootable media with Intel products (or their specified components) installed
on your computer.
4.1
Protection tools
Protection tools help you prevent the situation when the operating system won't start up for some
reason. With Intel Data Migration Software media builder, you will start Intel Data Migration
Software without loading the operating system. You will be able to use Intel Data Migration Software
by itself to recover damaged partitions.
On the sidebar, click Tools & Utilities, and then click Create Bootable Media
or
11
On the toolbar, click Tools & Utilities and select Create Bootable Media
4.2
You can run Intel Data Migration Software from an emergency boot disk on a bare-metal system or a
crashed computer that cannot boot. You can even back up disks on a non-Windows computer,
copying all its data into the backup archive by imaging the disk one sector at a time. To do so, you
will need bootable media that has a copy of the standalone Intel Data Migration Software version
installed on it.
If you purchased Intel Data Migration Software on the Web or as a download from a retailer, you can
create bootable media using the Bootable Media Builder. For this, you will need a blank CD-R/RW, a
blank DVD+R/RW or any other media from which your computer can boot, such as a Zip drive.
Intel Data Migration Software also provides the ability to create an ISO image of a bootable disc on
the hard disk.
When booting from the Bootable Media, you cannot perform backups to disks or partitions with Ext2/Ext3,
ReiserFS, and Linux SWAP file systems.
Run the Intel Data Migration Software Media Builder wizard. To do so:
Click the Tools & Utilities item on the sidebar and click Create Bootable Media
or
Click Tools & Utilities on the toolbar and select Create Bootable Media
or
Select Programs -> Intel -> Intel Data Migration Software -> Bootable Media Builder from
the Start menu.
Summary
4.2.1
You can select which components of Intel programs you want to place on the bootable media.
Intel Data Migration Software offers the following components:
12
Intel Data Migration Software (Full version) - includes support of USB, PC Card (formerly PCMCIA)
and SCSI interfaces along with the storage devices connected via them, and therefore is strongly
recommended.
Acronis System Report - the component allows you to generate a system report that is used for
collecting information about your system in case of any program problem. Report generation will
be available before you start Intel Data Migration Software from the bootable media. The
generated system report can be saved to a USB flash drive.
To select a component:
Check the program you want to include into the bootable media. The bottom field displays the
space required for the selected components. If you have other Intel products installed on your
computer, you can also include standalone versions of these programs into the same bootable
media.
If automatic start of the program is necessary, check the Starts automatically after parameter
and set the desired period (in seconds) after which the program will be stared.
4.2.2
Here, you can set bootable media startup parameters in order to configure rescue media boot
options for better compatibility with different hardware. Several options are available (nousb,
nomouse, noapic, etc.).
To add a startup parameter
Description
The following parameters can be used to load Linux kernel in a special mode:
acpi=off
Disables ACPI and may help with a particular hardware configuration.
noapic
Disables APIC (Advanced Programmable Interrupt Controller) and may help with a particular
hardware configuration.
nousb
Disables loading of USB modules.
nousb2
Disables USB 2.0 support. USB 1.1 devices still work with this option. This option allows using some
USB drives in USB 1.1 mode, if they do not work in USB 2.0 mode.
13
quiet
Copyright Acronis, Inc., 2000-2010
This parameter is enabled by default and the startup messages are not displayed. Deleting it will
result in the startup messages being displayed as the Linux kernel is loaded and the command being
offered prior to running the Intel program.
nodma
Disables DMA for all IDE disk drives. Prevents kernel from freezing on some hardware.
nofw
Disables FireWire (IEEE1394) support.
nopcmcia
Disables PCMCIA hardware detection.
nomouse
Disables mouse support.
[module name]=off
Disables the module (e.g. sata_sis=off).
pci=bios
Forces to use PCI BIOS, and not to access the hardware device directly. For instance, this parameter
may be used if the machine has a non-standard PCI host bridge.
pci=nobios
Disallows use of PCI BIOS; only direct hardware access methods are allowed. For instance, this
parameter may be used if you experience crashes upon boot-up, probably caused by the BIOS.
pci=biosirq
Uses PCI BIOS calls to get the interrupt routing table. These calls are known to be buggy on several
machines and they hang the machine when used, but on other computers it is the only way to get
the interrupt routing table. Try this option, if the kernel is unable to allocate IRQs or discover
secondary PCI buses on your motherboard.
4.2.3
Floppy diskette, CD-R/RW - if you are creating CD, diskettes or any removable media, insert the
blank disk so that the program can determine its capacity. When using 3.5 inch diskettes, you will
only be able to write one component at a time on a diskette (or a set of the diskettes). To write
another component, start Bootable Media Builder once again.
ISO image - having created an ISO disk image, you will be able to burn it onto any kind of
recordable DVD, using DVD recording software. Creating a bootable DVD directly from Bootable
Media Builder is impossible.
any other media your PC can boot from, such as USB flash drives, Zip drive, etc.
14
4.2.4
If you chose to create a bootable disk ISO image, specify the ISO file name and the folder where to
place it:
Enter a name for the .iso file in the File name field
4.2.5
4.3
Intel Data Migration Software provides a set of powerful and easy-to-use hard disk utilities. The Add
New Disk Wizard will help you to add a new hard disk to your computer, and the Clone Disk Wizard
will transfer all contents from one disk to another hard disk drive.
Clone Disk
Use Clone Disk Wizard, if you need to clone your hard disk drive by copying the partitions to another
hard disk.
Click the Clone Disk item to invoke the Clone Disk Wizard.
Add New Disk
Add New Disk Wizard helps you to add a new hard disk drive to your computer. You will be able to
prepare the new hard disk drive by creating and formatting new partitions on this hard disk.
Click the Add New Disk item to invoke the Add New Disk Wizard (p. 18).
4.3.1
Disk cloning
You might find that your hard disk does not have enough space for the operating system and
installed applications, preventing you from updating your software. In this case, you have to transfer
the system to a higher-capacity hard disk.
15
Intel Data Migration Software makes all the data transfer procedure from one disk to another (disk
cloning) quite easy and clear.
To clone a disk:
On the sidebar, click Tools & Utilities and select Clone Disk, or on the toolbar, click Tools &
Utilities and select Clone Disk.
Move method
Manual relayout
Cloning summary
4.3.1.1
Automatic (recommended in most cases). In automatic mode, you will only have to take several
simple actions to transfer all the data, including partitions, files and folders, to a newer disk,
making it bootable if the original disk was bootable.
Manual. Manual mode will provide more data transfer flexibility. Manual mode can be useful if
you need to change the disk partition layout.
If the program finds two disks, one partitioned and another unpartitioned, it will automatically recognize the
source disk as the partitioned disk and the destination disk as the unpartitioned disk, so the next two steps will
be bypassed.
4.3.1.2
Selecting a drive
You can determine the source and destination using the information provided in this window (disk
number, capacity, label, partition and file system information). If the program finds several
partitioned disks, it will ask you which is the source (i.e. the older data disk).
The current Intel Data Migration Software version does not support cloning of dynamic and GPT disks.
If there are a non-Intel system disk and only one Intel SSD attached, by default the non-Intel disk will be selected
as a source and the Intel will be selected as a destination.
16
Columns - selects the columns to display. You can change the width of a column by dragging
its borders with the mouse.
Copyright Acronis, Inc., 2000-2010
Disk properties (duplicated in the context menu, invoked by right-clicking objects) - opens the
selected partition or disk properties window.
This window contains two panels. The left panel contains the properties tree and the right
describes the selected property in detail. The disk information includes its physical parameters
(connection type, device type, size, etc.); partition information includes both physical (sectors,
location, etc.), and logical (file system, free space, assigned letter, etc.) parameters.
4.3.1.3
After you select the source disk, you have to select the destination where the disk information will be
copied to. The previously selected source becomes grayed-out and disabled for selection.
If either disk is unpartitioned, the program will automatically recognize it as the destination and bypass this
step.
4.3.1.4
Move method
Intel Data Migration Software offers you the following data transfer methods:
As is - a new partition will be created for every old one with the same size and type, file system
and label. The unused space will become unallocated.
Proportional - the new disk space will be proportionally distributed between cloned partitions
Manual - you will specify a new size and other parameters yourself
Using the As is method, Intel Data Migration Software also transfers unsupported and damaged file systems.
4.3.1.5
Manual relayout
The manual transfer method enables you to resize partitions on the new disk. By default, the
program resizes them proportionally.
This window displays rectangles indicating the source hard disk, including its partitions and
unallocated space, as well as the new disk layout.
Along with the hard disk number, you can see disk capacity, the label, volume and file system
information. Different volume types, including primary, logical and unallocated space are marked
with different colors.
To resize, change the volume type, change the letter or label of the existing volume, right click on it,
select Edit and in the new window set the necessary parameters.
Clicking Next, you will proceed to the Cloning summary (p. 18) window.
Be careful! Clicking Back in this window will reset all size and location changes that you've
selected, so you will have to specify them again.
17
4.3.1.6
Cloning summary
The disk cloning summary contains a list of briefly described operations to be performed on the
disks.
Click Cancel to cancel the procedure and quit to the main program window.
Cloning a disk, containing the currently active operating system, will require reboot. After clicking
Proceed you will be asked to confirm the reboot.
Cloning a non-system disk or a disk, containing a not currently active OS, will proceed without
reboot. After you click Proceed, Intel Data Migration Software will start cloning the old disk to the
new disk, indicating the progress in a special window.
4.3.2
If you do not have enough space for your data (e.g. family photos and videos), you can either replace
the old disk with a new higher-capacity one (data transfers to new disks are described in the previous
chapter), or add a new disk only to store data, leaving the system on the old disk. If the computer has
a bay for another disk, it would be easier to add a disk drive than to clone one.
To add a new disk, you must first install it in your PC.
To add a new hard disk:
Click the Home item on the sidebar, go to Tools & Utilities and select Add New Disk, or click
Tools & Utilities on the toolbar and select Add New Disk.
If there are any partitions on the new disk, they must be deleted first. If the added disk contains partitions, Intel
will warn you by displaying the warning message. Click OK to delete the existing partitions on the added disk.
4.3.2.1
Select the disk that you have added to the computer. If you have added several disks, select one of
them and click Next to continue. You can add the other disks later by restarting the Add New Disk
Wizard.
You can also see the properties of all the hard disks installed into your system, e.g. the name and the
model of the selected disk drive, its capacity, file system and its interface.
4.3.2.2
In order to use the space on a hard disk, it must be partitioned. Partitioning is the process of dividing
the hard disk's space into logical divisions. Each logical division may function as a separate disk with
18
an assigned drive letter, its own file system, etc. Even if you do not intend to divide your hard disk
into logical divisions it must be partitioned so that the operating system knows that it is intended to
be left in one piece.
You can create partition(s) only if there is unallocated space on your disk.
Select the partition and click Create new partition in the upper part of the window, or right click
on the partition, and select Create new partition in the context menu.
partition type,
4.3.2.3
Partition settings
Size
You can resize and relocate the partition being created.
If you want to resize the partition:
Point the cursor at the partition border. If the cursor is pointed exactly at the partition border, it
will change into two vertical lines with arrows on each side.
Hold down the left mouse button and drag the selected partition border to enlarge or reduce the
partition size.
You can also set the size of the partition manually, by typing-in the desired partition size in the
Partition Size field.
If you want to relocate the partition:
Point the cursor at the partition. The cursor will change into a crosshair.
Hold down the left mouse button and drag the partition until you get the necessary size of the
Free space before and/or Free space after fields. You can also set the amount of unallocated
space before or after the selected partition by manually typing-in the necessary value in the
respective fields.
If you create one or more logical drives, the program will reserve some unallocated space for system needs in
front of the created partition(s). If you create a primary partition or a primary partition together with a logical
one then no unallocated space will be reserved for system needs. Later, you may convert this unallocated area
into a primary disk if there is any need for it.
File System
Choose the file system type for partition being created and click Next to continue. Different
partitions may have different type of file system.
19
You can either leave the partition unformatted, or choose between the following file system types:
FAT 16 native DOS system. Most operating systems recognize it. However, if your disk drive is
more than 4 GB, it is not possible to format it in FAT16.
FAT 32 is an improved 32-bit version of the FAT file system that supports volumes up to 2 TB.
NTFS is a Windows NT, Windows 2000, Windows XP and Windows Vista native file system.
Choose it if you use these operating systems. Note, that Windows 95/98/Me and DOS cannot
access NTFS partitions.
Linux Ext2 is a Linux native file system. It is fast enough, but it is not a journaling file system.
Linux Ext3 officially introduced with Red hat Linux version 7.2, Ext3 is a Linux journaling file
system. It is forwards and backwards compatible with Linux Ext2. It has multiple journaling
modes, as well as broad, cross platform compatibility in both 32-bit and 64-bit architectures.
Linux ReiserFS is a journaling file system for Linux. Generally it is more reliable and faster than
Ext2. Choose it for your Linux data partition.
Partition type
In order to use the space on a hard disk, it must be partitioned. Partitioning is the process of dividing
the hard disk's space into logical divisions. Each logical division may function as a separate disk with
an assigned drive letter, its own file system, etc. Even if you do not intend to divide your hard disk
into logical divisions, it must be partitioned so that the operating system knows that it is intended to
be left in one piece.
Choose the type of partition to be created. You can define the new partition as primary or logical.
Primary - choose this parameter if you are planning to boot from this partition. Otherwise, it is
better to create a new partition as a logical drive. You can have only four primary partitions per
drive, or three primary partitions and one extended partition.
Note: If you have several primary partitions, only one will be active at a time, the other primary
partitions will be hidden and wont be seen by the OS.
Mark the partition as active - an active partition is used for loading an operating system.
Selecting Active for a partition without an installed operating system could prevent your
computer from booting.
Logical - choose this parameter if you dont intend to install and start an operating system from
the partition. A logical drive is part of a physical disk drive that has been partitioned and
allocated as an independent unit, but functions as a separate drive.
Note: if you create one or more logical drives, the system will reserve some unallocated space for
system needs in front of created partition(s). If you create a primary partition or a primary
partition together with a logical one, then no unallocated space will be reserved for system
needs. Later on, you may convert this unallocated area into a primary disk if there is any need for
it.
Partition letter
Select a letter to be assigned to the partition being created from the drop-down list. If Auto is
selected, the program assigns the first unused drive letter in alphabetical order.
20
Partition label
Partition label is a name, assigned to a partition so that you can easily recognize it. For example, one
could be called System a partition with an operating system, Program an application partition,
Data a data partition, etc. Partition label is an optional attribute.
Enter the label of the partition being created and click Accept to continue.
4.3.2.4
The Add new disk summary contains a list of briefly described operations to be performed on
partitions (disks).
Click Cancel to cancel the procedure and quit to the main program window.
Before clicking the Proceed button you can use the Back and Next buttons to navigate through the Add New
Disk Wizard windows and make changes.
4.3.3
Intel Data Migration Software includes tools for secure destruction of data on an entire hard disk
drive, individual partitions, as well as for erasing individual files and eliminating user system activity
traces.
These tools ensure the security of your confidential information, as well as maintain your privacy
when you work with a PC, because they clean-up the evidence showing your actions (records in
various system files) that you dont even know about. This could include user names and passwords.
Acronis DriveCleanser
Acronis DriveCleanser provides secure data destruction on your hard disk.
Click the Acronis DriveCleanser item to launch the Acronis DriveCleanser utility.
4.3.3.1
Acronis DriveCleanser
Many operating systems do not provide users with secure data destruction tools, so deleted files can
be recovered easily by using simple applications. Even a complete disk reformat cannot guarantee
you permanent confidential data destruction.
Acronis DriveCleanser solves this problem with guaranteed and permanent data destruction on
selected hard disks and/or partitions. It allows you to select from a number of data destruction
algorithms depending on the importance of your confidential information.
21
Click Tools & Utilities on the toolbar, and select Acronis DriveCleanser
4.3.3.2
Data selection
First, you must select the hard disk partitions where you want to destroy data.
To select a partition, click the corresponding rectangle. You will see a red mark in the upper right
corner indicating the partition is selected.
You can select an entire hard disk or several disks for data destruction. To do this, click the rectangle
corresponding to the hard disk (with a device icon, disk number and capacity).
You can select several partitions simultaneously located on different hard disks or on several disks.
4.3.3.3
Algorithm selection
Acronis DriveCleanser utilizes a number of the most popular data destruction algorithms. Select the
desired algorithm from the drop-down list.
Algorithm (writing Passes Record
method)
Fast
United States
4
Department of
Defense 5220.22-M
United States:
NAVSO P-5239-26
(RLL)
United States:
NAVSO P-5239-26
(MFM)
German: VSITR
1st 6th alternate sequences of: 0x00 and 0xFF; 7th 0xAA; i.e. 0x00,
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0xAA.
Russian: GOST
P50739-95
Logical zeros (0x00 numbers) to each byte of each sector for 6th to 4th
security level systems. Randomly selected symbols (numbers) to each
byte of each sector for 3rd to 1st security level systems.
Peter Gutmann
35
22
http://www.cs.auckland.ac.nz/~pgut001/pubs/secure_del.html).
Bruce Schneier
After you select an algorithm, Acronis DriveCleanser will perform all the actions necessary to destroy
the contents of the selected partition or disk. After this is done, you will see a message indicating
successful data destruction.
The aforementioned algorithms offer various levels of confidential data destruction. Thus the picture
you might see on a disk or partition depends on the data destruction algorithm. But what you
actually see are disk sectors filled with either zeros or random symbols.
4.3.3.4
Algorithm definition
The Algorithm definition window shows you a template of the future algorithm; the list contains
many elements, including the defined algorithm at the previous stage.
The window has the following legend: The first column of the list contains the number of passes for a
disk; the second contains the type of operation on a disk (there are just two: to write a symbol to
disk, "writing", and to verify written, "verification"); the third column contains the pattern of data to
be written to disk.
The pattern to be written is always a hexadecimal value, for example, a value of this kind: 0x00,
0xAA, or 0xCD, etc. These values are 1 byte long, but they may be up to 512 bytes long. Except for
such values, you may enter a random hexadecimal value of any length (up to 512 bytes). Your
algorithm may also include one more value for writing that is designated as the complementary
value the value that is complementary to the one written to disk during the previous pass.
If the binary value is represented by the 10001010 (0x8A) sequence, then the complementary binary value will
be represented by the 01110101 (0x75) sequence.
23
The Algorithm definition window offers you the template for the algorithm only. You should define
exactly what the software should write to disk to destroy the confidential data according to your
algorithm.
To do this, click your mouse on the line representing pass #1 and click Next.
4.3.3.5
The Wiping Pass Adjustment window allows you to define the pattern to be written to disk
(hexadecimal value).
This is what the window control elements mean: You may enter any hexadecimal value into the field
under the Write pattern switch to write it to a hard disk during any pass (during the first pass in this
case).
By setting the switch to Write a random number position, you will first select to write a random
value to disk, and specify the length of the random value in bytes in the field below.
The U.S. standard provides the writing of random values to each byte of each disk sector during the
first pass, so set the switch to Write a random number position and enter 1 into the field.
Click the Next button to continue.
You will be taken to the algorithm definition window again and will see that the former record (1
write 00) was replaced by 1 write random value, 1 byte.
To define the next pass, select the second line of the list and click the Next button.
You will see the already-familiar window, but this time there will be more switch positions available:
two additional positions will be available for selection:
Write complementary to previous pass pattern: As during the second pass of the U.S. standard,
each disk sector is filled with hexadecimal values that are complementary to those written during
the previous pass. Therefore you should set the switch to the Write complementary to previous
pass pattern position and click the Next button.
You will be taken to the algorithm definition window again. In this window, the second record
looked like this before: write 00, and it was replaced by: write previous step complementary
value.
Verify
Following the U.S. data destruction standard specification, define third and fourth data overwriting
passes.
In the same way, you can create any data destruction algorithm to match your security
requirements.
4.3.3.6
In the next Saving Custom Algorithm window, you will be able to save the algorithm you have
created. This will be useful if you are going to use it again.
24
In order to save your algorithm, you need to give it a filename and define the path in the Select file
field or click the Browse button to locate an existing file on the disk. You should also enter a brief
description of your algorithm.
Each custom algorithm is stored in a separate file with its own name. If you try to write a new
algorithm to an already existing file, the existing files contents will be erased.
4.3.3.7
Post-wiping actions
In the Post-wiping Actions window, you can select an action to be performed on the partitions
selected for data destruction:
Leave partitions as is just destroy data using the algorithm selected below
4.3.3.8
25
5 Other operations
5.1.1
Operation status
The operation status window reports about the state of the current operation.
The progress bar indicates the level of completion during the performance of the selected operation.
In some cases, the operation may take much time to be completed. If this is the case, you may select the
Shut down the computer when 'operation' is completed check box. When the operation finishes, Intel
Data Migration Software will turn the computer off.
26
6 Glossary of terms
Bootable media
A physical media (CD, DVD, USB flash drive or other media supported by a machine BIOS as a boot
device) that contains stanalone version of <BRAND> <PRODUCT_NAME>.
Bootable media is most often used to:
access and back up the data that has survived in a corrupted system;
27