Documente Academic
Documente Profesional
Documente Cultură
02-07-2015 / EHL
1 of 4
2 of 4
Vertical Busbars
Insert the incoming section and vertical
distribution busbars
Main busbars
Insert horizontal busbar
Location of Busbar holders will be
adjusted to fit the vertical busbars
Covering
Inserting covers and doors are also based
on meta data.
Select the element you want to cover, to
pre-set the dialog settings.
(E.g. selecting a mounting plate GP3x4
prior to opening the door dialog, will
automatically set the door size to 3x4)
02-07-2015 / EHL
3 of 4
Horizontal barriers
Mark the area which should be fitted
with horizontal barriers.
Press the barrier wizard, to insert
barriers.
Auto Insert barriers by selecting/ticking
Auto or by manually pointing out the
current length of the barriers to be
inserted.
Based on meta data, Galaxy will loop
through each inserted element to
evaluate their surroundings and suggest
the best fitted barrier type. (Either
None SP or SPM).
When Galaxy notes that a design is
wrong, it will display an alarm in the
design tree at the affected elements.
Mark the element, and the property
window will explain the design issue.
02-07-2015 / HTH
4 of 4
Hinges
Mark the area fitted with doors that
should be fitted with suitable hinges.
Press the Hinges wizard, to insert
hinges.
Based on meta data, Galaxy will loop
through each door to evaluate its
surroundings and suggest the best
fitted hinges.
When Galaxy notes that a design is
wrong, it will display an alarm in the
design tree at the affected elements.
Tip:
Use the validate function to ensure that
all Horizontal barriers and hinges are
correctly inserted.
02-07-2015 / EHL
02-07-2015 / EHL
Shortcuts
Front
Top
Left
Right
Rear
Zoom fit
3D
02-07-2015 / EHL
Moving in elements
Vertical move
Press <Ctrl> and move highlighted
element(S)
Or
Click the toggle button
and move highlighted element(S)
Horizontal move
Press <Shift> + <Ctrl> and move
highlighted element(S)
Or
Click the toggle button
and move highlighted element(S)
02-07-2015 / EHL
02-07-2015 / EHL
02-07-2015 / EHL
Change snap
Each dialog is created with the most
commonly used snap setting.
02-07-2015 / Initials
02-07-2015 / EHL
Tip:
If you want to view another panel or an other part of
Galaxy without saving the drawing you may start another
session of Galaxy.
To discharge any changes, close Galaxy by clicking the
red cross in upper right corner.
02-07-2015 / EHL
Enclosure
Frames and covering.
Compartments
Fixed inserts, MD, Plug-in etc.
Busbars
All CU-Flex and busbar systems
Electrical components
All electrical components inserted from the
Miscellaneous menu.
Paste selected
Paste selected will insert the marked items again in the
same panel.
Save it as a Snippet.
Save as Snippets will allow you to save the marked
elements, and insert it in the same panel or any other
panel.
Please see Tech Notes for location for snippets files.
Tip:
In the Snippet tab in left side property box you may
rename snippets, and find any snippet file saved by you.
02-07-2015 / HTH
Tip:
To rotate in an other direction, select another display
direction, and rotate from this view.
02-07-2015 / EHL
Tip:
When creating a new item, you may reuse settings from
an existing item :
Locate the item you want to use as template for a new
item and Press <Shift> while clicking on
new.
02-07-2015 / EHL
02-07-2015 / EHL
BOM
Items
when applicable.
02-07-2015 / EHL
Define panels
Create purchase
the keyboard.
02-07-2015 / EHL
02-07-2015 / HTH
02-07-2015 / EHL
02-07-2015 / EHL