Documente Academic
Documente Profesional
Documente Cultură
Ships
PART 6 CHAPTER 31
NEWBUILDINGS
SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS
Coating
JANUARY 2013
The electronic pdf version of this document found through http://www.dnv.com is the officially binding version
The content of this service document is the subject of intellectual property rights reserved by Det Norske Veritas AS (DNV). The user
accepts that it is prohibited by anyone else but DNV and/or its licensees to offer and/or perform classification, certification and/or
verification services, including the issuance of certificates and/or declarations of conformity, wholly or partly, on the basis of and/or
pursuant to this document whether free of charge or chargeable, without DNV's prior written consent. DNV is not responsible for the
consequences arising from any use of this document by others.
FOREWORD
DNV is a global provider of knowledge for managing risk. Today, safe and responsible business conduct is both a license
to operate and a competitive advantage. Our core competence is to identify, assess, and advise on risk management. From
our leading position in certification, classification, verification, and training, we develop and apply standards and best
practices. This helps our customers safely and responsibly improve their business performance. DNV is an independent
organisation with dedicated risk professionals in more than 100 countries, with the purpose of safeguarding life, property
and the environment.
The Rules lay down technical and procedural requirements related to obtaining and retaining a Class Certificate. It is used
as a contractual document and includes both requirements and acceptance criteria.
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to
such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that
the maximum compensation shall never exceed USD 2 million.
In this provision Det Norske Veritas shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf
of Det Norske Veritas.
CHANGES
General
This is a new document.
This document replaces previous Pt.3 Ch.1 Sec.15 F - edition July 2012.
The rules come into force 1 July 2013.
CONTENTS
Sec. 1
A.
A
A
A
General ................................................................................................................................................ 5
Introduction ..................................................................................................................................................................... 5
100 Objective ............................................................................................................................................................... 5
200 Scope..................................................................................................................................................................... 5
300 Application............................................................................................................................................................ 5
Sec. 2
Requirements ...................................................................................................................................... 6
A. Documentation ................................................................................................................................................................ 6
A 100 Documentation requirements ................................................................................................................................ 6
B. Monitoring ...................................................................................................................................................................... 6
B 100 Monitoring requirements ...................................................................................................................................... 6
C. Corrosion Prevention Systems ........................................................................................................................................ 6
C 100 Requirements for corrosion prevention systems................................................................................................... 6
SECTION 1
GENERAL
A. Introduction
A 100 Objective
101 The rules in this chapter give requirements to corrosion prevention of tanks and spaces/ areas for vessels.
The class notation will provide documentation that the vessel is in compliance with the IMO PSPCs.
A 200 Scope
201
Documentation requirements
Monitoring of inspection equipment, techniques and reporting methods.
A 300 Application
301
SOLAS Chapter II-1, Part A-1, Regulation 3-2 and the IMO Resolution MSC.215(82): Performance
Standard for Protective Coatings (PSPC) for Dedicated Seawater Ballast Tanks in All Types of Ships and
Double-Side Skin Spaces of Bulk Carriers
SOLAS Chapter II-1, Part A-1, Regulation 3-11 and the IMO Resolution MSC.288(87): Performance
Standard for Protective Coatings (PSPC) for Cargo Oil Tanks of Crude Oil Tankers
IMO Resolution MSC.244(83): Performance Standard for Protective Coatings for Void Spaces on Bulk
Carriers and Oil Tankers
MSC.1/Circ.1279: Guidelines for Corrosion Protection of Permanent Means of Access Arrangements, as
relevant.
Guidance note:
The requirements of IMO Resolution MSC.244(83) are made voluntary by IMO.
---e-n-d---of---G-u-i-d-a-n-c-e---n-o-t-e---
302 The COAT-PSPC(X) notations are intended for all SOLAS vessels, but may be applied to all types of
vessels. The vessels shall comply with the requirements for corrosion prevention of tanks and spaces/areas as
described in Sec.2 C.
303 The performance standards and guidelines referred to in 301 are further described in Classification Note
No. 33.1. IMO PSPC is used as a common name for the listed IMO documents.
SECTION 2
REQUIREMENTS
A. Documentation
A 100 Documentation requirements
101
For class notation COAT-PSPC(X), documentation shall be submitted as required by Table A1.
102 The initial documentation (specifications and procedures) shall be submitted for approval prior to start
of any coating work (shop priming). The final documentation (also including logs and records) shall be
submitted for review prior to delivery of the vessel.
Table A1 - Documentation requirements
Object
Documentation type
Dedicated seawater ballast tanks M042 - Coating Technical File (CTF)
Double-side skin spaces
M042 - Coating Technical File (CTF)
Void spaces
M042 - Coating Technical File (CTF)
Cargo oil tanks
M042 - Coating Technical File (CTF)
Additional description
All vessels
Bulk Carriers
Bulk Carriers and Oil Tankers
Oil tankers
Info
AP
AP
AP
AP
103
For general requirements to documentation, including definition of the Info codes, see Pt.0 Ch.3 Sec.1.
104
For a full definition of the documentation types, see Pt.0 Ch.3 Sec.2.
B. Monitoring
B 100 Monitoring requirements
101 During construction phase the coating inspection requirements (equipment, techniques and reporting
methods) shall be monitored by the Society.
Guidance note:
The attending surveyor of the Society will not verify the application of the coatings but will review the reports of the
coating inspectors to verify that the specified procedures have been followed.
---e-n-d---of---G-u-i-d-a-n-c-e---n-o-t-e---
Tanks/spaces
Dedicated seawater ballast tanks
Cargo oil tanks
Double-side skin spaces
Void spaces
Ship types
All vessels
Oil Tankers
Bulk Carriers
Bulk Carriers, Oil Tankers
The notations may be combined, e.g. a Bulk Carrier may have a COAT-PSPC(B;D;V) class notation.