Documente Academic
Documente Profesional
Documente Cultură
5. Which one of the following determines when a wireless client will roam
from one AP to another?
a. The current AP detects a weak signal coming from the client and forces the cli- ent to
roam.
Chapter 7: Planning Coverage with Wireless APs 149
2. The next AP overhears the clients signal and asks it to roam.
3. The clients roaming algorithm reaches a threshold in signal quality.
4. The client loses its IP address.
6. Which one of the following 802.11 frames is used to trigger a roam from
one AP to another?
1. Association request
2. Disassociation request
3. Probe
4. Reassociation request
7. Which one of the following statements is true about roaming?
1. All wireless clients use the same algorithms to trigger a roaming
condition.
2. Wireless clients can scan available channels to look for a new AP
when roam- ing.
3. Wireless clients must roam from one AP to another on the same
channel.
4. The 802.11 standard defines a set of roaming algorithms for
clients.
8. Which one of the following statements is true about a good wireless LAN
design?
1. Neighboring APs should use the same channel to promote good
roaming.
2. APs should be positioned so that their cells overlap.
3. APs should be positioned so that their cells do not overlap at all.
4. APs should use channels that overlap each other.
9. When you are designing the AP channel layout for an area, which one of
the fol- lowing is the most important consideration?
1. The number of channels is conserved.
2. APs in different areas use different channels.