Documente Academic
Documente Profesional
Documente Cultură
ISORIA
MAMMOUTH
Butterfly Valves for High Corrosion, Ultra High Purity
and General Industrial Applications.
ACRIS
SEALING PRINCIPLES
Primary and Secondary Shaft Sealing.
Upstream/Downstream Sealing.
Safety Sealing.
Flange Sealing.
ACRIS
VITON o-ring
PFA-TEFLON liner
(grade 350 or 450 HP)
Resilient back-up
(silicone or VITON)
APPLICATIONS
ACRIS butterfly valves often replace other
types of valves such as plug, ball and knife gates
in non-traditional butterfly valve applications.
The ACRIS can be used for end of line service
and provide tight shut-off at the full rated pressure of the valve.
ACRIS valves withstand the effects of all
known corrosive fluids, and offer the purity required for ultra high purity applications. The superior pressure/temperature operating parameters
are conservatively stated for reliable, full-term operation of the valve. Operated within these parameters, the ACRIS has a long, indefinite life in
most applications.
ACRIS PFA-Teflon lined butterfly valves
can be used for pressures up to 150 psi and for
industrial vacuum to (0.0002 PSIA). The ACRIS
is also suitable on steam service (up to 280F) alternating with the flowing media.
PFA-TEFLON liner
(grade 350 or 450 HP)
Resilient back-up
(silicone or VITON)
Pressure-Temperature limits
Psi
150
VITON o-ring
75
-20
Expansion plug
(18-8 stainless steel)
302
320 F
ISORIA
CONSTRUCTION FEATURES
The ISORIA elastomer-lined butterfly valve is part of a series of valves designed for the multitude of moderately
corrosive applications throughout industry. Included in this series is the
MAMMOUTH for large diameter (up
to 120") and high pressure (up to 375
psi) applications.
The ISORIA valve uses a spherically
machined disc and a one-piece body
that is totally isolated from the flowing
media by means of the inner lining. A
strong shaft-disc connection is provided
Upper
atmosphere
seal
PERFORMANCE CHARACTERISTICS
ISORIA
Sizes:
Pressure:
MAMMOUTH
1 to 24" Wafer
44" to 120" Flanged
26" to 60" Wafer
and flanged
1 to 24" Lug body
14" to 24" Semi-lug body
ISORIA - Industrial vacuum
(.01 PSIA) to 375 psi*
MAMMOUTH - Industrial vacuum
(.01 PSIA) to 375 psi*
Temperature:
Flange
Adaptability:
PTFE
Sleeve
bearing
One piece
body
PTFE
Sleeve
bearing
Shaft
retainer
Splined
shaft-disc
connection
Upper
Shaft
Replaceable
molded liner
completely
encapsulating
the valve body
Spherically
machined
disc
PTFE
Sleeve
bearing
Lower
shaft
Shaft
retainer
8 valve shown
Lower
cover
Butterfly Valves
TYPE VALVE
BODY STYLE
BODY MATERIAL
SHAFT
DISC
LINER
1
to
60"
ISORIA 10
(150 psig)
T1 Wafer
(1- 24)
T4 - Lug
(1 - 24")
T2 Semi-lug
(14" - 24")
T5 - Flat face
flanged
(6 - 60)
T6 - Raised face
flanged
(26 - 60)
3t = Cast iron
(T1 & T6)
3g = Ductile iron
(T2, T4, T5 & T6)
6k = 420 Stainless
(Standard for
1 - 44& 60)
6e = 17-4 Stainless
(Standard for
48 to 56)
2 = Aluminum bronze
3a = Halar ECTFE
coated ductile iron
3g = Ductile iron
3p = Hard rubber
coated ductile iron
5c = Norichlor
5d= Noridur
6 = 316 Stainless
6i = Polished 316
stainless
6u = Alloy 20
XA = EPDM
XV = High temperature
EPDM
K=Nitrile
CB = Carboxylated
nitrile
CC = White carboxylated
nitrile
Y = Hypalon
VA = Acid Viton
VC = High temperature
Viton
1
to
40"
ISORIA 16
(240 psig)
T1 Wafer
(1- 24)"
T4 - Lug
(1 - 24")
T2 - Semi-lug
(14" - 24")
T5 - Flat face
flanged
(6 - 40)
T6 - Raised face
flanged
(26 - 40)
3t = Cast iron
(T1 & T6)
3g = Ductile iron
(T2, T4, T5 & T6)
6k = 420 Stainless
(Standard for
1 - 24")
6e = 17-4 Stainless
(Standard for
26 to 40)
2 = Aluminum bronze
3g = Ductile iron
6 = 316 Stainless
6i = Polished
316 stainless
XA = EPDM
XV = High temperature
EPDM
K = Nitrile
6k = 420 Stainless
2 = Aluminum bronze
3g = Ductile iron
3p = Hard rubber
coated ductile iron
6 = 316 Stainless
XC = EPDM
K = Nitrile
ISORIA 20
(300 psig)
ISORIA 25
(375 psig)
OPTIONS
CODE
66 to
120
66 to
120
44 to
84
44 to
78
44 to
72
MAMMOUTH 6
(90 psig)
MAMMOUTH 10
(150 psig)
MAMMOUTH 16
(240 psig)
MAMMOUTH 20
(300 psig)
MAMMOUTH 25
(375 psig)
T5 - Flat faced
flanged
(44 - 120)
1"
to
24"
ACRIS
IWISO
Wafer
(1" to 24")
3g = Ductile iron
(One-piece shaft/disc)
1k = 17-4 Stainless
over molded with PFA
Grade 350 Teflon
ILISO
Lug
(1" to 24")
F = PFA Grade
350 Teflon
H = PFA Grade
450 Teflon
1h = 17-4 Stainless
over molded with PFA
Grade 450 Teflon
(1" to 14")
1s = Carbon steel
over molded with PFA
Grade 350 Teflon
(2" to 12")
S9
S9C
SC1
SB7
*NOTE: Valve face-to-face is per ISO 5752 and API-609 dimensions except for 14 and 18 ACRIS.
For Example:
6" ACRIS IL-31KF/S9 = IL
3
1k
F
/S9
ISO Lug
Ductile iron body
17-4 Stainless shaft disc over molded with
PFA Grade 350 Teflon
PFA Grade 350 Teflon liner
Viton back-up liner
ISORIA 16 T1-3t6k6XA =
16
T1
3t
6k
6
XA
StandardNo extra
code
ACRIS
SQUARE
A
4 HOLES, G
E
B
SIZE
SHAFT
IN
MM
IN
IN
IN
IN
Disc Chord
Length
Square
Height
1
14
1
2
3
4
6
8
10
12
*14
16
*18
20
24
25
30
40
50
80
100
150
200
250
300
350
400
450
500
600
3.74
3.74
3.93
4.25
4.88
5.62
6.88
8.85
10.03
11.41
13.54
14.48
16.49
17.48
19.68
1.69
1.69
1.88
2.24
4.05
4.80
6.25
7.75
8.93
10.43
13.11
14.13
16.81
17.12
19.92
1.29
1.29
1.29
1.69
1.81
2.06
2.19
2.38
2.69
3.06
4.00
4.00
5.00
5.00
6.00
3.38
3.38
3.74
3.97
5.23
6.73
8.62
10.86
13.22
15.98
20.98
23.50
25.00
27.48
32.67
0.000
0.000
0.835
1.207
2.286
3.271
5.439
7.382
9.432
11.252
13.148
15.1991
16.972
19.011
22.094
.630
.630
.630
.630
.630
.630
.630
.748
.984
1.181
1.181
1.417
1.417
1.575
1.968
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.22
1.22
1.61
1.61
1.45
1.85
1.85
2.20
F
G
(Bolt Circle) (Hole Size)
1.969
1.969
1.969
1.969
2.756
2.756
2.756
4.016
4.921
4.921
5.511
5.511
5.511
6.496
6.496
WEIGHT
ISO
Pattern
LBS.
F05
F05
F05
F05
F07
F07
F07
F10
F12
F12
F14
F14
F14
F16
F16
4.4
4.4
5.6
5.1
9.2
12.3
22.7
63.8
88
117
172
231
336
440
565
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.437
0.562
0.562
0.708
0.708
0.708
0.866
0.866
SQUARE
A
4 HOLES, G
E
SIZE
SHAFT
IN
MM
IN
IN
IN
IN
Disc Chord
Length
Square
Height
1
14
1
2
3
4
6
8
10
12
*14
16
*18
20
24
25
30
40
50
80
100
150
200
250
300
350
400
450
500
600
3.74
3.74
3.93
4.25
4.88
5.62
6.88
8.85
10.03
11.41
13.54
14.48
16.49
17.48
19.68
1.69
1.69
1.88
2.24
4.05
4.80
6.25
7.75
8.93
10.43
13.11
14.13
16.81
17.12
19.92
1.29
1.29
1.29
1.69
1.81
2.06
2.19
2.38
2.69
3.06
4.00
4.00
5.00
5.00
6.00
3.38
3.38
3.74
4.56
5.55
7.99
10.11
12.24
15.431
18.03
20.35
23.62
24.40
28.74
32.99
0.000`
0.000
0.835
1.207
2.286
3.271
5.439
7.382
9.432
11.252
13.148
15.199
16.972
19.011
22.094
.630
.630
.630
.630
.630
.630
.630
.748
.984
1.181
1.181
1.417
1.417
1.575
1.968
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.22
1.22
1.61
1.61
1.45
1.85
1.85
2.20
* 14 and 18 inch ACRIS valves do not conform to ISO 5752 face-to-face dimensions.
F
G
(Bolt Circle) (Hole Size)
1.969
1.969
1.969
1.969
2.756
2.756
2.756
4.016
4.921
4.921
5.511
5.511
5.511
6.496
6.496
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.437
0.562
0.562
0.708
0.708
0.708
0.866
0.866
WEIGHT
ISO
Pattern
LBS.
F05
F05
F05
F05
F07
F07
F07
F10
F12
F12
F14
F14
F14
F16
F16
4.4
4.4
5.6
7.6
12.6
19.2
33.0
55
93
130
191
260
375
490
629
ISORIA
TOP PLATE
1 1/4" TO 12"
F
A
4 HOLES, I
14" TO 24"
SQUARE
4 HOLES, I
SIZE
SHAFT
WEIGHT
IN
MM
IN
IN
IN
IN
Disc Chord
Length
Square
Height
H
(Bolt Circle)
I
(Hole Size)
ISO
Pattern
LBS.
1
2
3
4
6
8
10
12
14
16
18
20
24
40
50
80
100
150
200
250
300
350
400
450
500
600
4.13
4.31
5.59
6.41
7.63
8.74
10.03
11.10
13.18
14.96
16.14
17.32
19.48
2.28
2.51
3.74
4.13
5.55
6.33
7.51
9.25
10.51
11.73
12.91
14.09
17.24
1.29
1.69
1.81
2.04
2.20
2.36
2.67
3.07
3.07
4.01
4.48
5.00
6.06
3.26
3.66
5.66
6.45
8.62
10.82
12.99
14.68
16.25
18.11
20.31
22.83
27.32
0.958
1.116
2.648
3.432
5.494
7.408
9.492
11.267
12.693
14.486
16.401
18.305
22.101
0.433
0.433
0.433
0.551
0.551
0.748
0.748
0.866
-
0.551
0.551
0.551
0.708
0.708
0.984
0.984
1.102
-
0.984
1.417
1.417
1.417
1.968
.945
.945
.945
.945
1.181
1.378
1.378
1.575
1.771
2.165
2.165
2.165
2.559
1.969
1.969
1.969
1.969
2.756
2.756
4.016
4.921
4.921
5.511
5.511
5.511
6.496
0.275
0.275
0.275
0.275
0.354
0.354
0.433
0.551
0.551
0.708
0.708
0.708
0.866
F05
F05
F05
F05
F07
F07
F10
F12
F12
F14
F14
F14
F16
2.4
2.8
5.5
8.5
15
23
36
66
110
158
211
286
418
TOP PLATE
1 1/2" TO 12"
F
4 HOLES, I
14" TO 24"
SQUARE
H
E
B
4 HOLES, I
D
SIZE
SHAFT
WEIGHT
IN
MM
IN
IN
IN
IN
Disc Chord
Length
Square
Height
H
(Bolt Circle)
I
(Hole Size)
ISO
Pattern
LBS.
1
2
3
4
6
8
10
12
14
16
18
20
24
40
50
80
100
150
200
250
300
350
400
450
500
600
4.13
4.31
5.59
6.41
7.63
8.74
10.03
11.10
13.18
14.96
16.14
17.32
19.48
2.28
2.51
3.74
4.13
5.55
6.33
7.75
9.09
10.03
11.69
12.95
14.13
17.28
1.29
1.69
1.81
2.04
2.20
2.36
2.67
3.07
3.07
4.01
4.48
5.00
6.06
4.17
4.60
5.47
8.14
10.11
12.20
15.51
18.18
20.74
23.81
25.03
28.26
32.87
0.958
1.116
2.648
3.432
5.494
7.408
9.492
11.267
12.693
14.486
16.401
18.305
22.101
0.433
0.433
0.433
0.551
0.551
0.748
0.748
0.866
-
0.551
0.551
0.551
0.708
0.708
0.984
0.984
1.102
-
0.984
1.417
1.417
1.417
1.968
.945
.945
.945
.945
1.181
1.378
1.378
1.575
1.771
2.165
2.165
2.165
2.559
1.969
1.969
1.969
1.969
2.756
2.756
4.016
4.921
4.921
5.511
5.511
5.511
6.496
0.275
0.275
0.275
0.275
0.354
0.354
0.433
0.551
0.551
0.708
0.708
0.708
0.866
F05
F05
F05
F05
F07
F07
F10
F12
F12
F14
F14
F14
F16
4.4
5.5
8.8
12
24
52
85
101
136
222
268
394
564
ISORIA
SQUARE
A
4 HOLES, G
E
B
SIZE
SHAFT
IN
MM
IN
IN
IN
IN
Disc Chord
Length
Square
Height
14
16
18
20
24
350
400
450
500
600
13.18
14.96
16.14
17.32
19.48
10.03
11.69
12.95
14.13
17.28
3.07
4.01
4.48
5.00
6.06
23.14
25.74
28.03
29.13
33.70
12.693
14.486
16.401
18.305
22.101
0.984
1.417
1.417
1.417
1.968
1.77
2.16
2.16
2.16
2.55
F
G
(Bolt Circle) (Hole Size)
4.921
5.511
5.511
5.511
6.496
0.551
0.708
0.708
0.708
0.866
Angle
10
20
30
40
50
60
70
80
90
Cv
.02
.05
.10
.18
.30
.50
.90
1.0
WEIGHT
ISO
Pattern
LBS.
F12
F14
F14
F14
F16
135
180
247
326
496
Butterfly Valves
LINER MATERIAL
XA
XV
Nitrile Rubber
Carboxylated Nitrile
CB
Hypalon
Acid Viton
VA
Concentrated acids
High Temperature
Viton
VC
PFA - Teflon
Teflon, Viton and Hypalon are registered trademarks of E.I. DuPont Company.
FLOW COEFFICIENTS
Cvo = gallons/minute with DP = 1 psi
MODEL
Cross-sectional view of
typical installation options
WELD-NECK
FLANGE
TYPICAL APPLICATIONS
EPDM
SLIP-ON
FLANGE
SIZE
ACRIS
ISORIA 10
50
14
50
100
61.5
61.5
209
154
154
376
280
280
580
475
475
916
760
760
1276
1044
1044
2320
2090
2090
5800
4120
4120
10
9396
8453
8453
12
15892
10465
10465
14
21344
12880
9269
16
26912
17020
12075
18
34104
22655
15295
20
41760
28750
20010
24
60500
41860
28750
26
ISORIA 16
MANUAL
LEVERS:
MANUAL GEAR
10
DYNACTAIR SERIES
RACK & PINION: 1.5, 3, 6, 12, 25.
DOUBLE SCOTCH-YOKE: 50, 100.
Hard anodized aluminum housing, polyurethane
coated end caps, actuator base has multiple ISO
valve drilling patterns, NAMUR accessory mounting, fail open or fail closed.
VARIABLE TORQUE OUTPUT: 200, 400, 800.
Ductile iron housing, steel cylinder, steel and
stainless internals, ISO valve drilling patterns,
NAMUR accessory mounting, epoxy coated, fail
open or fail closed
ACCESSORIES
POSITIONERS
3-15 psig or 4-20 mA inputs; visual indication;
Class I, II, & III, Divisions 1 & 2, Groups A-G;
NEMA 4X housing; simple mechanical zero and
span adjustments; low, high and max flow spool
valves with low air consumption.
LIMIT SWITCHES
Mechanical or proximity; AC/DC current; fully
adjustable cams; 1/2" or 3/4" NPT conduit entries;
NEMA 4, 4X, 7, and 9; internal terminal strip;
visual indication.
SOLENOID VALVES
3 way and 4 way; AC or DC current;
NEMA 4, 4x, 7 and 9 standard or direct
Namur mount type with manual override;
aluminum,brass and stainless steel.
LOCK-OUT/TAG-OUT
Available for all valve actuators. Allows locking of
valves in open, closed, or both positions depending
on customer requirements.
11
Upper left: DYNACTAIR spring return actuator with lock-out/tag-out, mounted to a 10" ACRIS isolating a
CLO2 tank in a pulp mill. Upper middle: Manually operated 8" ACRIS replacing plug valves for pump isolation
in EDC and VCM service. Upper right: Manually operated 4 ACRIS for UV light isolation in high purity water.
AMRI, Inc.
2045 Silber Road
Houston, Texas 77055
Phone: (713) 682-0000
Fax: (713) 682-0080
FACTORIES
KSB, Inc.
4415 Sarellen Road
Richmond, VA 23231
Phone: (804) 222-1818
Fax: (804) 226-6961
GIW Industries, Inc.
5000 Wrightsboro Road
Grovetown, Georgia 30813-9750
Phone: (706) 863-1011
Fax: (706) 860-5897
ARGENTINA
BRAZIL
CHILE
MEXICO
VENEZUELA
Butterfly Valves
Actuators and Systems
AMRI, Inc.
2045 Silber Road
Houston, Texas 77055
Phone: 713-682-0000
Fax: 713-682-0080
Email: info@amrivalves.com
http://www.amrivalves.com
C-1002 / 08012001 Revision 2 - This catalog is not contractual and may be amended without notice.
USA