Documente Academic
Documente Profesional
Documente Cultură
At the end of this guide are some trouble shooting tips in case things dont work out.
2. Install CATIA
The installation step of the add-in will search for installations of CATIA and create start-up
links for each one. This step will automate the creation of configuration files and add
entries to the start menu.
Any versions of CATIA installed after installing the add-ins will need to be configured
manually.
Page 1
27 February 2012
o You can check what versions are currently installed and can un-install too:
Page 2
27 February 2012
Page 3
27 February 2012
4. Installing packages
First install any versions of software that Simulayt package needs to work with, as the
Simulayt installer will detect installed versions and only install the Simulayt parts that
are needed
o AF5 and CL5 require CATIA V5 to be installed
A CD3 or CPE or CPM license is needed
AFM5 5.22.0 and CL5 5.22.0 work with
CATIA v5 R18
CATIA v5 R19
CATIA v5 R20
CATIA v5 R21
CATIA v5 R22
Install any available service packs for CATIA
o AF6 and CL6 require CATIA V6 to be installed
A CD3 or CEG or CMP license is needed
AF6 6.12.5 and CL6 6.12.5 work with
CATIA v6 R209, R211, R212, R212x
Install any available service packs for CATIA
o CLX is a standalone program
5.22.0 and 6.12.5 packages both contain the program
The program has no pre-requisites
o CMA requires Abaqus/CAE to be installed
CMA 2012.0210 works with:
Abaqus/CAE 6.10.1
Abaqus/CAE 6.10.1-EF
Abaqus/CAE 6.11.3
Abaqus/CAE 6.12
Ensure Service Packs are installed generally Simulayt software is compiled to work
with stable versions of the software, so this will be at least SP1.
Page 4
27 February 2012
Run the setup.exe program in the download folder created from the zip file
o This will run the Microsoft Visual C++ runtime library installers as necessary.
o Follow the instructions on screen
o Later comments will assume that you accepted the default location for the
installation (= Simulayt Installation directory). If you choose a different
location, adjust the instructions as necessary
Page 5
27 February 2012
5. Installing licenses
Install licensing
o Request a license from DSx-Client
This will require the host ID
For nodelock, of the machine running the software
For network, id of the machine serving licenses
To get the host ID:
Automatically:
o Run DisplayHostID.exe
You can download this from the web page where you
request a license
Make sure you use the ID for the wired Ethernet
adaptor wireless adaptors may get turned off, and
Virtual Adaptors will not work.
Manually:
o Type ipconfig /all in a command window:
Windows IP Configuration
Host Name . . . . . . .
Primary Dns Suffix . .
Node Type . . . . . . .
IP Routing Enabled. . .
WINS Proxy Enabled. . .
DNS Suffix Search List.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
myMachineName
mynetwork
Hybrid
No
No
mynetwork
Page 6
27 February 2012
DHCP Enabled. . .
Autoconfiguration
IPv4 Address. . .
Subnet Mask . . .
Lease Obtained. .
Lease Expires . .
Default Gateway .
DHCP Server . . .
DNS Servers . . .
. . . .
Enabled
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
Yes
Yes
192.168.1.66(Preferred)
255.255.255.0
16 January 2012 08:31:16
24 January 2012 08:31:12
192.168.1.1
192.168.244.78
192.168.244.65
192.168.244.66
Primary WINS Server . . . . . . . : 10.22.11.10
Secondary WINS Server . . . . . . : 10.22.11.11
NetBIOS over Tcpip. . . . . . . . : Enabled
Look for the physical address of the Ethernet adapter Local Area
Connection
When providing the number for generating a license, remove the
- symbols in the example above this would be ABDCEF123456
The host ID on Windows is a 12 digit hexadecimal number
o Licensing comes in three different modes:
Nodelock
Allows software to be used on one machine
Uses a license file that is read directly by the program
Does NOT require a FLEXlm server
The license file references the MAC address of the host machine
o Can only be used on the one machine
Requires an environment variable to tell the program where to
find the file:
o Under Control Panel\System and Security\System
o Choose the Advanced tab
Page 7
27 February 2012
Network
A server runs on a machine
o The server reads the license file
o Other machines can request a license from the server
o See FLEXlm installation guide for help on setting up license
server
Machines that will run the software need to be able to contact the
server on the network (ensure connection is possible).
The license file can specify a number of licenses for each feature
Requires an environment variable to tell the program where to
find the license server:
o Under Control Panel\System and Security\System
o Choose the Advanced tab
Page 8
27 February 2012
Page 9
27 February 2012
Page 10
27 February 2012
Choose the one for the version of CATIA you wish to customise
Acknowledge the warning:
Page 11
27 February 2012
Page 12
27 February 2012
To add both AFM and CL use the path: (all one line)
C:\Program Files\Simulayt\Fiber Modeler\CATIA V5\B20\win_b64\;C:\Program Files
\Simulayt\Composites Link\CATIA V5\B20\win_b64\
You can edit that file to add new environment variables if needed
o For CMA with Abaqus/CAE
Automatic
Page 13
27 February 2012
Trouble Shooting:
License problems:
If you have a problem with licensing then the error message will explicitly say so. If the message does
not say that you have a license problem then what you are seeing is not caused by a license issue.
If it is a license error, then read the message carefully, and if necessary google the error code to see
what FLEXlm thinks is the problem. Most times the issue is related to FLEXlm and the installation of
the license.
Checking the Environment Variable:
A simple method of checking that the Environment Variable has been correctly set is to open a
Command Prompt window (under Programs\Accessories) and type set SIMULAYT_LICENSE_FILE.
The value of the license Environment Variable will then be returned.
Page 14
27 February 2012
If it still doesnt load, or the tick boxes become unselected, it indicates a problem with loading the DLLs
It may be because some Microsoft DLLs used by Simulayt DLLs are not available. Please manually run
the vcredist_2008_x64.exe, vcredist_2005_x64.exe programs in the installation. These MS programs
are run when Simulayt installs, but can fail silently. When run manually you should get more feedback
about success.
It is also possible that some SolidWorks or Abaqus DLLs we use are not up-to-date please ensure you
have the latest service pack installed. Also, check the documentation to see that your version of
SolidWorks or Abaqus is supported.
One other thing that prevents a DLL loading is if a 32bit DLL is used with a 64bit program or vice
versa.
Page 15
27 February 2012