Documente Academic
Documente Profesional
Documente Cultură
Examples
COMPUTERS &
STRUCTURES
INC.
SAP2000
Integrated Software for
Structural Analysis and Design
Version 11.00
December 2006
Copyright
The computer program SAP2000 and all associated documentation are proprietary and
copyrighted products. Worldwide rights of ownership rest with Computers and Structures, Inc.
Unlicensed use of the program or reproduction of the documentation in any form, without prior
written authorization from Computers and Structures, Inc., is explicitly prohibited.
Further information and copies of this documentation may be obtained from:
Computers and Structures, Inc.
1995 University Avenue
Berkeley, California 94704 USA
Phone: (510) 845-2177
FAX: (510) 845-4096
e-mail: info@csiberkeley.com (for general questions)
e-mail: support@csiberkeley.com (for technical support questions)
web: www.csiberkeley.com
DISCLAIMER
CONSIDERABLE TIME, EFFORT AND EXPENSE HAVE GONE INTO THE
DEVELOPMENT AND DOCUMENTATION OF SAP2000. THE PROGRAM HAS BEEN
THOROUGHLY TESTED AND USED. IN USING THE PROGRAM, HOWEVER, THE
USER ACCEPTS AND UNDERSTANDS THAT NO WARRANTY IS EXPRESSED OR
IMPLIED BY THE DEVELOPERS OR THE DISTRIBUTORS ON THE ACCURACY OR
THE RELIABILITY OF THE PROGRAM.
THE USER MUST EXPLICITLY UNDERSTAND THE ASSUMPTIONS OF THE
PROGRAM AND MUST INDEPENDENTLY VERIFY THE RESULTS.
COMPUTERS &
STRUCTURES
INC.
Software Verification
PROGRAM NAME:
REVISION NO.:
SAP2000
6
CONTENTS
Introduction
Methodology
Acceptance Criteria
Summary of Examples
Matrix of Program Features Covered in Example Problems
Automating the SAP2000 Verification Checking Process
Examples
Frames
1-001
General Loading
1-002
Temperature Loading
1-003
1-004
1-005
Displacement Loading
1-006
1-007
End Releases
1-008
1-009
1-010
End Offsets
1-011
Insertion Point
1-012
1-013
1-014
Eigenvalue Problem
1-015
1-016
1-017
1-018
CONTENTS - 1
COMPUTERS &
STRUCTURES
INC.
Software Verification
PROGRAM NAME:
REVISION NO.:
SAP2000
6
1-019
1-020
1-021
1-022
1-023
1-024
1-025
1-026
1-027
1-028
1-029
1-030
Moving Loads
Shells
2-001
2-002
2-003
2-004
2-005
2-006
2-007
2-008
2-009
2-010
2-011
2-012
2-013
2-014
2-015
Orthotropic Plate
2-016
Out-of-Plane Buckling
2-017
In-Plane Buckling
2-018
2-019
2-020
CONTENTS - 2
COMPUTERS &
STRUCTURES
INC.
Software Verification
PROGRAM NAME:
REVISION NO.:
SAP2000
6
Planes
3-001
3-002
3-003
3-004
Thick-Walled Cylinder
3-005
Pore Pressure
Asolids
4-001
4-002
Thick-Walled Cylinder
4-003
4-004
Pore Pressure
Solids
5-001
5-002
5-003
5-004
5-005
5-006
5-007
5-008
Thick-Walled Cylinder
5-009
5-010
Buckling
5-011
Temperature Load
5-012
5-013
Pore Pressure
CONTENTS - 3
COMPUTERS &
STRUCTURES
INC.
Software Verification
PROGRAM NAME:
REVISION NO.:
SAP2000
6
Links
6-001
6-002
6-003
Gap Element
6-004
Hook Element
6-005
6-006
6-007
6-008
6-009
6-010
6-011
6-012
Cables
7-001
7-002
7-003
Conclusions
Frames
Area Elements - Shells, Planes and Asolids
Solids
Links
Cables
References
CONTENTS - 4