Documente Academic
Documente Profesional
Documente Cultură
password is blank
and no it is not the
word blank :) Some
features such as the
failover are
disabled by default
and if you want to
activate all of the
features then type
these 2 commands.
activation-key
0x4a3ec071
0x0d86fbf6 0x7cb1bc48 0x8b48b8b0 0xf317c0b5
activation-key 0xb23bcf4a 0x1c713b4f 0x7d53bcbc 0xc4f8d09c 0x0e24c6b6
Please note that it will take about 15 minutes to complete the license setup. Once the key
is verified you can use all the features such as failover.
If you wanted to run multiple ASAs then edit this line accordingly on the ASAs
Qemu Options: -vnc :2 none -vga none -m 1024 -icount auto -hdachs 980,16,32
When you reboot/boot your ASA it does take a while to boot and it may appear as though
it is stuck but just give it a few mins (5-10).
Many more articles to come so stay tuned.
Please reshare/subscribe/comment/+1 if you like my posts as it keeps me motivated to
write more and spread the knowledge.
8. Drop an ethernet switch the topology. If you dont do this and try drawing a direct
connection between Firewall and Cloud it will come up with error saying 'Devices does
not support this type of NIO. Use an ETHSW to bridge the connection to the NIO
Instead.
9. Connect both Cloud and Firewall to the Switch as following
10. Now start all devices in GNS and use following commands on the firewall to give it
an IP.
ciscoasa# config t
ciscoasa(config)# int gi
ciscoasa(config)# int gigabitEthernet 0
ciscoasa(config-if)# ip address 10.10.10.1 255.255.255.0
ciscoasa(config-if)# nameif management
ciscoasa(config-if)# no shut
11. Now, go back to Windows 7 and open 'Network and Sharing Centre', Click on Change
adapter settings and Change the IP Address of the Loopback adapater as following
12. You will have
to turn off your PC
firewall as you
will be copying
ASDM to ASA
firewall. If you
dont know this,
stop studying
networking or stop
the Windows
Firewall Service or
if that doesnt work
then Base Filtering
Service.