Documente Academic
Documente Profesional
Documente Cultură
Catalog
LV 50
Edition
2014
Siemens AG 2014
Related catalogs
Contents
E86060-K8280-A101-A1-7600
SIVACON
System Cubicles, System Lighting and
System Air-Conditioning
LV 50
PDF (E86060-K1920-A101-A6-7600)
ALPHA FIX
Terminal Blocks
LV 52
E86060-K1852-A101-A2-7600
SIVACON 8PS
Busbar Trunking Systems
BD01, BD2 up to 1250 A
LV 70
CA 01
All products of automation and drives technology and of lowvoltage power distribution and electrical installation technology
PDF (E86060-K1870-A101-A7-7600)
Products for Automation and Drives
Interactive Catalog, DVD
E86060-D4001-A510-D3-7600
Industry Mall
Information and Ordering Platform
in the Internet:
All products of automation and drives technology and of lowvoltage power distribution and electrical installation technology
www.siemens.com/industrymall
Catalog PDF
Internet:
www.siemens.com/lowvoltage/infomaterial
Trademarks
All product designations may be registered trademarks or
product names of Siemens AG or other supplying companies.
Third parties using these trademarks or product names for
their own purposes may infringe upon the rights of the trademark owners.
Further information about low-voltage power distribution and
electrical installation is available on the Internet at:
www.siemens.com/industrymall
Siemens LV 50 2014
Technical Support
Expert advice on technical questions with a
wide range of demand-optimized services
for all our products and systems.
www.siemens.com/lowvoltage/technical-support
Siemens AG 2014
SIVACON
System Cubicles,
System Lighting and
System Air-Conditioning
System Overview
Catalog LV 50 2014
Frame
Enclosure
Expansion
Preconfigured Cubicles
Special Cubicles
SIVACON 8MF/8MR
System Lighting
SIVACON 8MR
System Air-Conditioning
Supersedes:
Catalog LV 50 2012
Refer to the Industry Mall for current updates
of this catalog:
www.siemens.com/industrymall
The products contained in this
catalog can also be found in the
Interactive Catalog CA 01.
Article No.:
E86060-D4001-A510-D3-7600
Please contact your local Siemens branch
Siemens AG 2014
Appendix
Siemens AG 2014
Siemens LV 50 2014
Sustainability in focus
Siemens AG 2014
Excellent support
Consistent solutions are required for electrical power distribution in buildings. Our
answer is Totally Integrated Power (TIP).
TIP stands for innovative products, systems and software tools which ensure the
safe and reliable distribution of electric
power. They are supplemented by communication-capable circuit breakers and
modules which connect the power distribution system to the building automation
system or industrial automation solutions.
These in turn can be linked to a comprehensive energy management system
which contributes to optimizing the
consumption of electricity and hence to
lowering the costs of operation.
Siemens LV 50 2014
Siemens AG 2014
www.siemens.com/lowvoltage/lv-explorer
Information
Planning/Orders
Operation/Service
Training
Internet
Information and
Download Center
Newsletter
Picture Database
Industry Mall
Configurations
SIMARIS Software Tools
Technical Support
Service & Support Portal
CAx Download
Manager
My Documentation
Manager
Support Request
SITRAIN Portal
www.siemens.com/lowvoltage/support
www.siemens.com/lowvoltage/support
Siemens LV 50 2014
Siemens AG 2014
System Overview
1/2
Degrees of protection
Meaning of the code numbers
1/5
System cubicles
Introduction
SIVACON sicube 8MF
system cubicles
Preconfigured cubicles
1/7
System lighting
Cubicle lighting, plug-on mounts
1/3
1/4
1/8
System air-conditioning
SIVACON 8MR
system air-conditioning
Siemens LV 50 2014
Siemens AG 2014
System Overview
Degrees of Protection
Meaning of the code numbers
Overview
Cubicles are installed in the most varied environments, from
office buildings to workshops and manufacturing centers.
SIVACON sicube 8MF system cubicles are designed for all these
environments. In their standard versions, they offer the following
degrees of protection:
System cubicles without ventilation: IP40 and IP54
System cubicles with ventilation: IP30 and IP40
Different degrees of protection are available on request.
We are able to supply cubicles with all the degrees of protection
indicated in blue in the table below.
First code
number
0
Degree of protection
(protection against contact and foreign objects)
Description
Explanation
No protection
Explanation
No protection
No particular protection
Protection against
water drops falling
at an angle
Protection against
spraying water
Protection against
solid foreign objects
>12 mm
Protection against
splashing water
Protection against
water jets
Protection against
flooding
Protection against
immersion
Protection against
submersion
Example for
specification of a
degree of protection:
Code letters: I P
First code number: 4
Second code number: 0
Protection against
solid foreign objects
> 2.5 mm
Second
code
number
Protection against
solid foreign objects
>1 mm
Protection against
dust deposits
Protection against
dust ingress
1/2
Siemens LV 50 2014
Siemens AG 2014
System Overview
System Cubicles
Introduction
Overview
SIVACON sicube offers a modular system for unequipped,
empty enclosures. The system cubicles can be used in different
application areas and environments.
Degrees of protection
Available degrees of protection as standard:
System cubicles without ventilation: IP40 and IP54
System cubicles with ventilation: IP20 to IP40
Further degrees of protection are available upon request.
Application
SIVACON sicube 8MF system cubicles are designed especially
for:
Open- and closed-loop control technology
Power electronics
Data systems
Preconfigured cubicles
SIVACON sicube 8MF system cubicles are also available for
special applications, e.g. in special sizes:
Available dimensions
Applications:
In nuclear power plants
In case of increased vibrations (e.g. on excavators)
In areas at risk of earthquakes
Transport
Cubicles are dispatched ex works on transport skids, or in the
case of cubicle suites, on transport bases.
Structure
A system cubicle comprises the following basic elements:
Frame
Enclosure
Expansions
EMC versions
Siemens LV 50 2014
1/3
Siemens AG 2014
System Overview
System Cubicles
SIVACON sicube 8MF system cubicles
Overview
Application
SIVACON sicube 8MF system cubicles are intended for the
installation of devices and equipment for electronic and conventional open- and closed-loop control systems.
The design allows cubicle racks for 19-inch installations for the
most varied industrial electronics applications, alongside distribution modules for power distribution.
Specific design measures permit 8MF6 cubicles with the dimensions H W = 2200 900 mm or 2200 600 mm to be supplied
as earthquake-resistant versions for operation in nuclear power
stations (see "8MF6 earthquake-resistant cubicles" on the
previous page 1/3).
Design
8MF2: Completely welded frame
8MF5: Welded side frame sections, screwed on lateral stays,
delivery form: unassembled
8MF6: Welded side frame sections, screwed on lateral stays,
delivery form: assembled
Side and rear panels add 9 mm to the frame dimensions
Ground clearance of the doors: 63 mm
Concealed hinges with an opening angle of 180
(130 for cubicle suites)
Trim strips for labeling and integration of signaling lights
1/4
Siemens LV 50 2014
Siemens AG 2014
System Overview
System Cubicles
Preconfigured cubicles
Overview
Ventilated cubicles 8MF2 (IP30/40)
Compact designs and high packing densities demand special
measures for heat dissipation. We offer ventilated cubicles in a
preconfigured version, i.e. the complete cubicle can be ordered
with one article number.
NSE0_01344
Features
Perforated roof plates
Doors with 5 rows of ventilation slots
High air throughput per unit of area thanks to special
SBL ventilation design
IP30 and IP40 degrees of protection available
IP54 cubicles
Special ambient conditions require a high degree of protection.
Particularly its protection against splashing water makes this
cubicle solution suitable for use on production lines and in other
areas with sprinkler systems.
NSE0_01371a
Features
Seals on all enclosure parts
Siemens LV 50 2014
1/5
Siemens AG 2014
System Overview
System Cubicles
Preconfigured cubicles
EMC cubicles
To ensure a system's EMC, it is necessary that its devices emit
only limited interference and are at the same time immune as far
as possible to external interference.
Features
Cubicle frame and enclosure fully galvanized
Paint finish only on the outer surfaces of doors and rear/side
panels
Conductive seals pre-mounted for doors and rear/side panels
Additional standard base plate
PC cubicles 8MF2
A variant of the 8MF system cubicles can also be ordered as a
PC cubicle. The PC cubicle is a robust construction and is thus
suitable for use in industrial environments.
Features
The standard door is replaced by:
An upper compartment door (monitor cutout with inspection
pane)
A central hinged flap (with telescopic shelf for a keyboard)
A lower compartment door (with shelf for a printer)
NSE0_02135
1/6
Siemens LV 50 2014
Siemens AG 2014
System Overview
System Lighting
Cubicle lighting, plug-on mounts
Overview
Plug-on mounts
If a cubicle light is provided with a plug-on mount, it remains
immune to vibration and can be removed at any later time
without tools.
If fitted between two plug-on mounts, the cubicle light is fixed
statically to the cubicle frame. The cubicle light can only be fitted
to the cubicle frame by using plug-on mounts.
Cubicle lighting
The cubicle light is specifically suitable for operation in switchgear and controlgear cubicles.
In the case of lights with a SCHUKO socket outlet, the outlet is
incorporated with an on/off switch or motion detector in the
plastic enclosure.
The flat SL 025 slimline light with motion detector or on/off switch
is ideal for operation in cubicles and enclosures with a high
density of built-in electrical/electronic components.
All lights are fitted with environmentally-friendly energy-saving
lamps.
Rating of energy-saving lamps Rating of conventional incandescent
lamps
9W
60 W
11 W
75 W
20 W
100 W
Siemens LV 50 2014
1/7
Siemens AG 2014
System Overview
System Air-Conditioning
SIVACON 8MR system air-conditioning
Overview
Optimum, extended
air duct for the system
air-conditioning
35 C
Hot air from the
equipment and
busbars
55 C
Cubicle
Cold air
recirculation
25 C
NSE0_01390a
115 V AC
230 V AC
400/440 V AC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Switching capacities up to 16 A
--
--
--
--
--
--
--
--
--
Switching modules 16 A
--
--
--
Available or possible
-- Not available or not possible
On request
1/8
Siemens LV 50 2014
Siemens AG 2014
Frame
2/2
General data
2/3
Welded frames
2/5
Screwed frames
2/8
Cubicle suites
Siemens LV 50 2014
Siemens AG 2014
Frame
General data
Overview
Scope of delivery
8MF2
8MF5
8MF6
Frame
Welded,
zinkcor coated and
powder coated
Screwed (unassembled),
zinkcor coated and
powder coated
Screwed (assembled),
zinkcor coated and
powder coated
Sheet steel 4 mm
Sheet steel 4 mm
Surface
Powder coating
Finely textured surface for indoor installation RAL 7035
Standard version
Side panels
(for stand-alone installation only)
Door
Trim strip
Petrol
Roof plate
Degree of protection
Paint finish
8 MF 5 7 7 7 7 7
8 MF 2 7 7 7 7 7
Height
1800 mm
2000 mm
2200 mm
Width
600 mm
800 mm
900 mm
1000 mm
1200 mm
Depth
400 mm
600 mm
800 mm
Degree of
protection
IP40
Installation
Stand-alone installation
with two side panels
Suite installation
without side panels
8 MF 6 7 7 7 7 7
Height
1800 mm
2000 mm
2200 mm
Width
600 mm
800 mm
900 mm
1200 mm
Depth
400 mm
600 mm
800 mm
Degree of
protection
IP40
Installation
Stand-alone installation
with two side panels
Suite installation
without side panels
8
0
2
6
8
9
0
2
4
6
8
4
8
0
2
6
8
9
2
4
6
8
4
Addition to the frame dimension due to side panels, rear panels and doors
Example:
Addition to the frame dimensions
Width in mm
Depth in mm
--
--
Per door
--
25
2/2
Siemens LV 50 2014
Siemens AG 2014
Frame
Welded frames
Overview
8MF2 system cubicles
Features
Frame comprising two side frame sections and four lateral
stays
Fully welded
Profile of the side frames folded 5 times
Scope of delivery
NSE0_02133
2
1
2
3
4
Welded rack
5
Door (right-hand hinge) 6
Side panel
Roof panel
Rear panel
Trim strip
Siemens LV 50 2014
2/3
Siemens AG 2014
Frame
Welded frames
Width
Depth
DT Stand-alone installation
Article No.
2
mm
mm
mm
Price
per PU
kg
Price
per PU
Weight
per PU
approx.
kg
2000
2200
600
400
600
800
8MF2864-4E
8MF2866-4E
8MF2868-4E
85.000
90.000
100.000
8MF2864-4R
8MF2866-4R
8MF2868-4R
85.000
90.000
100.000
800
400
600
800
8MF2884-4E
8MF2886-4E
8MF2888-4E
95.000
100.000
110.000
8MF2884-4R
8MF2886-4R
8MF2888-4R
95.000
100.000
110.000
00
400
600
800
8MF2894-4E
8MF2896-4E
8MF2898-4E
100.000
110.000
120.000
8MF2894-4R
8MF2896-4R
8MF2898-4R
100.000
110.000
120.000
1000
400
600
800
8MF2804-4E
8MF2806-4E
8MF2808-4E
100.000
110.000
120.000
8MF2804-4R
8MF2806-4R
8MF2808-4R
100.000
110.000
120.000
1200
400
600
800
8MF2824-4E
8MF2826-4E
8MF2828-4E
115.000
125.000
135.000
8MF2824-4R
8MF2826-4R
8MF2828-4R
115.000
125.000
135.000
600
400
600
800
8MF2064-4E
8MF2066-4E
8MF2068-4E
105.000
105.000
120.000
8MF2064-4R
8MF2066-4R
8MF2068-4R
105.000
105.000
120.000
800
400
600
800
8MF2084-4E
8MF2086-4E
8MF2088-4E
110.000
120.000
165.000
8MF2084-4R
8MF2086-4R
8MF2088-4R
110.000
120.000
165.000
900
400
600
800
8MF2094-4E
8MF2096-4E
8MF2098-4E
125.000
135.000
145.000
8MF2094-4R
8MF2096-4R
8MF2098-4R
125.000
135.000
145.000
1000
400
600
800
8MF2004-4E
8MF2006-4E
8MF2008-4E
130.000
145.000
155.000
8MF2004-4R
8MF2006-4R
8MF2008-4R
130.000
145.000
155.000
1200
400
600
800
8MF2024-4E
8MF2026-4E
8MF2028-4E
145.000
155.000
165.000
8MF2024-4R
8MF2026-4R
8MF2028-4R
145.000
155.000
165.000
600
400
600
800
8MF2264-4E
8MF2266-4E
8MF2268-4E
130.000
135.000
145.000
8MF2264-4R
8MF2266-4R
8MF2268-4R
130.000
135.000
145.000
800
400
600
800
8MF2284-4E
8MF2286-4E
8MF2288-4E
135.000
145.000
175.000
8MF2284-4R
8MF2286-4R
8MF2288-4R
135.000
145.000
175.000
900
400
600
800
8MF2294-4E
8MF2296-4E
8MF2298-4E
140.000
165.000
175.000
8MF2294-4R
8MF2296-4R
8MF2298-4R
140.000
165.000
175.000
1000
400
600
800
8MF2204-4E
8MF2206-4E
8MF2208-4E
165.000
175.000
185.000
8MF2204-4R
8MF2206-4R
8MF2208-4R
165.000
175.000
185.000
1200
400
600
800
8MF2224-4E
8MF2226-4E
8MF2228-4E
185.000
195.000
210.000
8MF2224-4R
8MF2226-4R
8MF2228-4R
185.000
195.000
210.000
Note
Package size for 8MF2 cubicles = 1 unit,
i.e. 1 unit or a multiple thereof can be ordered.
If a door with left-hand hinges is required, add the suffix "-Z" to
the Article No. and "left-hand hinge" to the text.
Special size available on request.
Note the addition to the frame dimensions by side panels, rear
panels and doors.
Further information see page 2/2.
2/4
Siemens LV 50 2014
Siemens AG 2014
Frame
Screwed frames
Overview
8MF5 and 8MF6 system cubicles
Features
Frame comprising two side frame sections and four lateral
stays
Angle-welded side frame
Screwed lateral stays
Profile of the side frames folded 5 times
Type of delivery of the 8MF5: unassembled
Type of delivery of the 8MF6: assembled
The cubicle is secured to the floor using 4 holes with
a diameter of 14.5 mm in both bottom lateral stays.
NSE0_02132
2
1
2
3
4
Screwed rack
5
Door (right-hand hinge) 6
Side panel
Roof panel
Rear pane
Trim strip
Scope of delivery
A standard frame is delivered with the following standard
enclosure parts
Rear panel
Plain roof
Door with espagnolette lock and lock inserts
Side panels (in case of stand-alone installation)
Mounting of the enclosure parts using self-tapping screws;
no additional grounding measures are necessary therefore
Fitting of devices and internal partitions
Internal interfaces for partitions and devices:
Two rows of holes with a diameter of 9.2 mm and
spacing of 20 mm
Mounting with special bolts and contact washers which
comply with the grounding regulations
Siemens LV 50 2014
2/5
Siemens AG 2014
Frame
Screwed frames
Width
Depth
DT Stand-alone installation
Article No.
2
mm
mm
mm
Price
per PU
kg
Price
per PU
Weight
per PU
approx.
kg
2000
2200
600
400
600
800
8MF5864-4E
8MF5866-4E
8MF5868-4E
85.000
90.000
100.000
8MF5864-4R
8MF5866-4R
8MF5868-4R
85.000
90.000
100.000
800
400
600
800
8MF5884-4E
8MF5886-4E
8MF5888-4E
95.000
100.000
110.000
8MF5884-4R
8MF5886-4R
8MF5888-4R
95.000
100.000
110.000
900
400
600
800
8MF5894-4E
8MF5896-4E
8MF5898-4E
100.000
110.000
120.000
8MF5894-4R
8MF5896-4R
8MF5898-4R
100.000
110.000
120.000
1200
400
600
800
8MF5824-4E
8MF5826-4E
8MF5828-4E
115.000
125.000
135.000
8MF5824-4R
8MF5826-4R
8MF5828-4R
115.000
125.000
135.000
600
400
600
800
8MF5064-4E
8MF5066-4E
8MF5068-4E
105.000
105.000
120.000
8MF5064-4R
8MF5066-4R
8MF5068-4R
105.000
105.000
120.000
800
400
600
800
8MF5084-4E
8MF5086-4E
8MF5088-4E
110.000
120.000
165.000
8MF5084-4R
8MF5086-4R
8MF5088-4R
110.000
120.000
165.000
900
400
600
800
8MF5094-4E
8MF5096-4E
8MF5098-4E
125.000
135.000
145.000
8MF5094-4R
8MF5096-4R
8MF5098-4R
125.000
135.000
145.000
1200
400
600
800
8MF5024-4E
8MF5026-4E
8MF5028-4E
145.000
155.000
165.000
8MF5024-4R
8MF5026-4R
8MF5028-4R
145.000
155.000
165.000
600
400
600
800
8MF5264-4E
8MF5266-4E
8MF5268-4E
130.000
135.000
145.000
8MF5264-4R
8MF5266-4R
8MF5268-4R
130.000
135.000
135.000
800
400
600
800
8MF5284-4E
8MF5286-4E
8MF5288-4E
135.000
145.000
175.000
8MF5284-4R
8MF5286-4R
8MF5288-4R
135.000
145.000
175.000
900
400
600
800
8MF5294-4E
8MF5296-4E
8MF5298-4E
140.000
165.000
175.000
8MF5294-4R
8MF5296-4R
8MF5298-4R
140.000
165.000
175.000
1200
400
600
800
8MF5224-4E
8MF5226-4E
8MF5228-4E
185.000
195.000
210.000
8MF5224-4R
8MF5226-4R
8MF5228-4R
185.000
195.000
210.000
Note
Package size for 8MF5 cubicles = 1 unit,
i.e. 1 unit or a multiple thereof can be ordered.
If a door with left-hand hinges is required, add the suffix "-Z" to
the Article No. and "left-hand hinge" to the text.
Note the addition to the frame dimensions by side panels, rear
panels and doors.
Further information see page 2/2.
2/6
Siemens LV 50 2014
Siemens AG 2014
Frame
Screwed frames
8MF6 standard cubicle (screwed, assembled)
Height
Width
Depth
DT Stand-alone installation
Article No.
mm
mm
mm
Price
per PU
Price
per PU
kg
Weight
per PU
approx.
kg
2000
2200
600
400
600
800
8MF6864-4E
8MF6866-4E
8MF6868-4E
85.000
90.000
100.000
8MF6864-4R
8MF6866-4R
8MF6868-4R
85.000
90.000
100.000
800
400
600
800
8MF6884-4E
8MF6886-4E
8MF6888-4E
95.000
100.000
110.000
8MF6884-4R
8MF6886-4R
8MF6888-4R
95.000
100.000
110.000
900
400
600
800
8MF6894-4E
8MF6896-4E
8MF6898-4E
100.000
110.000
120.000
8MF6894-4R
8MF6896-4R
8MF6898-4R
100.000
110.000
120.000
1200
400
600
800
8MF6824-4E
8MF6826-4E
8MF6828-4E
115.000
125.000
135.000
8MF6824-4R
8MF6826-4R
8MF6828-4R
115.000
125.000
135.000
600
400
600
800
8MF6064-4E
8MF6066-4E
8MF6068-4E
105.000
105.000
120.000
8MF6064-4R
8MF6066-4R
8MF6068-4R
105.000
105.000
120.000
800
400
600
800
8MF6084-4E
8MF6086-4E
8MF6088-4E
110.000
120.000
165.000
8MF6084-4R
8MF6086-4R
8MF6088-4R
110.000
120.000
165.000
900
400
600
800
8MF6094-4E
8MF6096-4E
8MF6098-4E
125.000
135.000
145.000
8MF6094-4R
8MF6096-4R
8MF6098-4R
125.000
135.000
145.000
1200
400
600
800
8MF6024-4E
8MF6026-4E
8MF6028-4E
145.000
155.000
165.000
8MF6024-4R
8MF6026-4R
8MF6028-4R
145.000
155.000
165.000
600
400
600
800
8MF6264-4E
8MF6266-4E
8MF6268-4E
130.000
135.000
145.000
8MF6264-4R
8MF6266-4R
8MF6268-4R
130.000
135.000
145.000
800
400
600
800
8MF6284-4E
8MF6286-4E
8MF6288-4E
135.000
145.000
175.000
8MF6284-4R
8MF6286-4R
8MF6288-4R
135.000
145.000
175.000
900
400
600
800
8MF6294-4E
8MF6296-4E
8MF6298-4E
140.000
165.000
175.000
8MF6294-4R
8MF6296-4R
8MF6298-4R
140.000
165.000
175.000
1200
400
600
800
8MF6224-4E
8MF6226-4E
8MF6228-4E
185.000
195.000
210.000
8MF6224-4R
8MF6226-4R
8MF6228-4R
185.000
195.000
210.000
Note
Package size for 8MF6 cubicles = 1 unit,
i.e. 1 unit or a multiple thereof can be ordered.
If a door with left-hand hinges is required, add the suffix "-Z" to
the Article No. and "left-hand hinge" to the text.
Special size available on request.
Note the addition to the frame dimensions by side panels, rear
panels and doors.
Further information see page 2/2.
Siemens LV 50 2014
2/7
Siemens AG 2014
Frame
Cubicle suites
2
Version
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
8MF9100
1 unit
0.150
8MF9101
1 unit
0.825
Item
Description
Article No.
1.1
8MF2086-4R
1.2
1.3
1.4
2.1
8MF9100
3.1
3.2
4.1
5.1
5.2
5.3
8MF4131
8MF4016
8MF4511
8MF9100
Accessories
Version
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
Assembly kits
The assembly kit for cubicle interconnection comprises:
8MF9113
1 unit
0.150
8MF9115
1 unit
0.056
12 bolts size M8 15
12 hexagonal nuts size M8, DIN 4032-8
12 contact washers size 10, SN 70093
Sealing material
Set of seals to interconnect two cubicles with degree of protection IP54
2/8
Siemens LV 50 2014
Siemens AG 2014
Enclosure
3/2
3/3
General data
Introduction
Modification of enclosure parts with
ventilation options
3/7
Doors
Doors with ventilation openings
Double-wing doors
Compartment doors for cubicle width
600 to 900 mm
Rear doors
3/9
Panels
Side panels and mounted windows
3/10
Bases
Base plates and foam rubber profiles
3/11
3/12
3/13
3/14
Roofs
Roof plates for cable entry
Busbar roof plates
Perforated roof plates
Perforated ventilation roofs
3/15
3/16
Accessories
Locking systems
Defined openings
3/4
3/5
3/6
Siemens LV 50 2014
Siemens AG 2014
Enclosure
General Data
Introduction
Overview
Scope of delivery
1
Busbar roof
panel
Side cover
panel for
busbar roof
Roof panel
for cable entry
Perforated ventilation
roof
3
4
Note
Note the addition to the frame dimensions by side panels, rear
panels and doors.
Further information see page 2/2.
7 Double-wing
compartment door
8 Ventilation slots
NSE0_01340a
10
9
11
10
9
8
7
3/2
Siemens LV 50 2014
Siemens AG 2014
Enclosure
General Data
Modification of enclosure parts
with ventilation options
Overview
The customizing of enclosure parts for cubicles is one of our major strengths. Depending on the required degree of protection,
ventilation slots or gills can be incorporated directly into doors or
side/rear panels.
Ordering examples for customized enclosure parts
Example
An 8MF cubicle (8MF2266-4R) in degree of protection IP20 can
look as follows:
Door with six rows of 8MF ventilation slots, four cutouts for
measuring instruments and three holes for command devices
plus a perforated roof plate or a ventilation roof plate.
In this case the following must be ordered:
3
8MF ventilation slots with ventilation cross-section, see page 3/4.
Item
Designation
Qty
Article No.
1.1
Cubicle
8MF2266-4R
1.2
1.3
1.4
1.5
Single hole
1.6
15
2000
17
2200
19
Holes/cutouts/bolts
Dimensions
Single hole
Small; round/square
Large; round/square
Up to 30 mm
Over 30 mm
Rectangular cutouts
Small
Large
With window
With Plexiglas insert
40 mm 108 mm
(incl. 4 times fastening holes, 3.5 mm)
Bolts
Additional welding bolt
M6 20 mm or M4 10 mm
8MF3441
Ventilation versions
Row of ventilation slots for 8MF,
cubicle door, rear panel
Width in mm
500
600
800
900
500
600
800
900
500
600
800
900
Version
Dimensions in mm
60 12 5
80 12 5
80 12 4
Siemens LV 50 2014
3/3
Siemens AG 2014
Enclosure
Doors
Doors with ventilation openings
Overview
All door versions can be equipped with ventilation openings,
see ordering notes on page 3/3.
Dimensions of the ventilation slots
8MF ventilation slots (75 8 mm)
cm
mm
IP201)
1913
2662
3000
3075
3826
Dimensions
mm
mm
NSE0_01347
600
800
900
1000
1200
Ventilation gills
IP23
80 12 5
1.5
NSE0_01348a
1)
cm
IP30
120
180
210
216
240
NSE0_01346
600
800
900
1000
1200
3/4
Siemens LV 50 2014
1.5
Siemens AG 2014
Enclosure
Doors
Double-wing doors
Overview
Double-wing doors are available as
Symmetrically divided double-wing doors and
Asymmetrically divided double-wing doors
In both versions the espagnolette lock is fitted in the right-hand
door.
If the double-wing door is required with left-hand hinges, add the
suffix "-Z" to the Article No. and "left-hand hinge" to the text.
Other divisions on request.
Cubicle width
mm
mm
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
800
900
8MF3040
8MF3041
1 unit
1 unit
5.000
5.000
2000
800
900
8MF3042
8MF3043
1 unit
1 unit
5.000
5.000
2200
800
900
8MF3044
8MF3045
1 unit
1 unit
5.000
5.000
1800
800
900
8MF3046
8MF3047
1 unit
1 unit
5.000
5.000
2000
800
900
8MF3048
8MF3050
1 unit
1 unit
5.000
5.000
2200
800
900
8MF3051
8MF3052
1 unit
1 unit
5.000
5.000
PS*/
P. unit
Weight
per PU
approx.
NSE0_01271
Cubicle width
mm
mm
DT Article No.
Price
per PU
kg
NSE0_01272
800
900
1000
1200
8MF3053
8MF3054
8MF3055
8MF3056
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
2000
800
900
1000
1200
8MF3057
8MF3058
8MF3121
8MF3122
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
2200
800
900
1000
1200
8MF3123
8MF3124
8MF3125
8MF3126
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
1800
800
900
1000
1200
8MF3127
8MF3128
8MF3130
8MF3131
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
2000
800
900
1000
1200
8MF3132
8MF3133
8MF3134
8MF3135
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
2200
800
900
1000
1200
8MF3136
8MF3137
8MF3138
8MF3140
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
Siemens LV 50 2014
3/5
Siemens AG 2014
Enclosure
Doors
Compartment doors
for cubicle width 600 to 900 mm
Overview
NSE0_01341
Dimensions
Various divisions are possible
Ground clearance: 63 mm
Distance to top edge of frame: 6.3 mm
Distance between the compartment doors: 26 mm
Espagnolette lock with 3 mm double-bit
Types on request
3/6
Siemens LV 50 2014
Siemens AG 2014
Enclosure
Doors
Rear doors
Overview
Rear doors
For rear access
Configured as a double door for a cubicle width of 1000 mm
and more
Cubicle height
Cubicle width
mm
mm
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
NSE0_01275
600
800
900
1000
1200
8MF3200
8MF3201
8MF3202
8MF3203
8MF3204
1 unit
1 unit
1 unit
1 unit
1 unit
15.000
15.000
15.000
15.000
15.000
2000
600
800
900
1000
1200
8MF3206
8MF3207
8MF3208
8MF3210
8MF3211
1 unit
1 unit
1 unit
1 unit
1 unit
15.000
15.000
15.000
15.000
15.000
2200
600
800
900
1000
1200
8MF3212
8MF3213
8MF3214
8MF3215
8MF3216
1 unit
1 unit
1 unit
1 unit
1 unit
15.000
15.000
15.000
15.000
15.000
1800
600
800
900
1000
1200
8MF3220
8MF3221
8MF3222
8MF3223
8MF3224
1 unit
1 unit
1 unit
1 unit
1 unit
15.000
15.000
15.000
15.000
15.000
2000
600
800
900
1000
1200
8MF3226
8MF3227
8MF3228
8MF3230
8MF3231
1 unit
1 unit
1 unit
1 unit
1 unit
15.000
15.000
15.000
15.000
15.000
2200
600
800
900
1000
1200
8MF3232
8MF3233
8MF3234
8MF3235
8MF3236
1 unit
1 unit
1 unit
1 unit
1 unit
15.000
15.000
15.000
15.000
15.000
PS*/
P. unit
Weight
per PU
approx.
Cubicle height
Cubicle width
mm
mm
DT Article No.
Price
per PU
kg
800
900
8MF3240
8MF3241
1 unit
1 unit
25.000
25.000
2000
800
900
8MF3242
8MF3243
1 unit
1 unit
25.000
25.000
2200
800
900
8MF3244
8MF3245
1 unit
1 unit
25.000
25.000
1800
800
900
8MF3246
8MF3247
1 unit
1 unit
25.000
25.000
2000
800
900
8MF3248
8MF3250
1 unit
1 unit
25.000
25.000
2200
800
900
8MF3251
8MF3252
1 unit
1 unit
25.000
25.000
NSE0_01271
Siemens LV 50 2014
3/7
Siemens AG 2014
Enclosure
Doors
Rear doors
Rear, asymmetrically divided double-wing door
Cubicle height
Cubicle width
mm
mm
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
NSE0_01272
3/8
1800
800
900
1000
1200
8MF3253
8MF3254
8MF3255
8MF3256
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
2000
800
900
1000
1200
8MF3257
8MF3258
8MF3321
8MF3322
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
2200
800
900
1000
1200
8MF3323
8MF3324
8MF3325
8MF3326
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
1800
800
900
1000
1200
8MF3327
8MF3328
8MF3330
8MF3331
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
2000
800
900
1000
1200
8MF3332
8MF3333
8MF3334
8MF3335
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
2200
800
900
1000
1200
8MF3336
8MF3337
8MF3338
8MF3340
1 unit
1 unit
1 unit
1 unit
25.000
25.000
25.000
25.000
Siemens LV 50 2014
Siemens AG 2014
Enclosure
Panels
Side panels and mounted windows
Overview
Side panels
Side panels serve to complete a cubicle or cubicle suite. If an
assembled side panel is ordered, but no side is specified,
Cubicle depth
mm
mm
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
Side panels
Versions
NSE0_01287
- 400
- 600
- 800
8MF4120
8MF4121
8MF4122
1 unit
1 unit
1 unit
8.404
12.631
16.858
- 2000
- 400
- 600
- 800
8MF4130
8MF4131
8MF4132
1 unit
1 unit
1 unit
9.334
28.009
37.405
- 2200
- 400
- 600
- 800
8MF4140
8MF4141
8MF4142
1 unit
1 unit
1 unit
20.473
16.700
41.151
- 1800
- 400
- 600
- 800
8MF4125
8MF4126
8MF4127
1 unit
1 unit
1 unit
8.560
12.787
17.014
- 2000
- 400
- 600
- 800
8MF4135
8MF4136
8MF4137
1 unit
1 unit
1 unit
9.490
28.165
18.886
- 2200
- 400
- 600
- 800
8MF4145
8MF4146
8MF4147
1 unit
1 unit
1 unit
20.629
30.967
20.759
Siemens LV 50 2014
3/9
Siemens AG 2014
Enclosure
Bases
Base plates and foam rubber profiles
Overview
If the cubicle is installed on a closed base frame, it achieves
degree of protection IP20. If a one-piece base plate is used, the
degree of protection of the cubicle is increased to IP40.
Customer-specific holes (e. g. heavy-gauge threaded joints)
permit cable entry.
Cubicle depth
mm
mm
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
kg
NSE0_01284
400
600
800
8MF4060
8MF4061
8MF4062
1 unit
1 unit
1 unit
2.344
3.758
5.154
800
400
600
800
8MF4065
8MF4066
8MF4067
1 unit
1 unit
1 unit
3.194
5.084
6.964
900
400
600
800
8MF4070
8MF4071
8MF4072
1 unit
1 unit
1 unit
3.574
5.694
7.824
1000
400
600
800
8MF4073
8MF4074
8MF4075
1 unit
1 unit
1 unit
3.943
6.264
8.369
1200
400
600
800
8MF4076
8MF4077
8MF4078
1 unit
1 unit
1 unit
4.294
7.144
5.324
600
400
600
800
8MF4080
8MF4081
8MF4082
1 unit
1 unit
1 unit
3.564
5.094
6.544
800
400
600
800
8MF4085
8MF4086
8MF4087
1 unit
1 unit
1 unit
4.894
7.054
8.934
900
400
600
800
8MF4090
8MF4091
8MF4092
1 unit
1 unit
1 unit
5.514
7.944
10.074
1000
400
600
800
8MF4093
8MF4094
8MF4095
1 unit
1 unit
1 unit
6.084
8.747
11.060
1200
400
600
800
8MF4096
8MF4097
8MF4098
1 unit
1 unit
1 unit
5.514
8.534
11.374
600
600
800
8MF4101
8MF4102
1 unit
1 unit
6.823
8.966
800
600
800
8MF4106
8MF4107
1 unit
1 unit
8.683
11.376
900
600
800
8MF4111
8MF4112
1 unit
1 unit
9.611
12.578
1000
600
800
8MF4114
8MF4115
1 unit
1 unit
11.042
14.284
1200
600
800
8MF4117
8MF4118
1 unit
1 unit
13.012
16.804
Price
PS*/
per PU P. unit
Weight
per PU
approx.
1 unit
0.025
NSE0_01285
NSE0_01286
Base plates
3/10
Cubicle width
Cubicle depth
mm
mm
Foam rubber 20 20
1800
Siemens LV 50 2014
DT Article No.
kg
8MF3500
Siemens AG 2014
Enclosure
Roofs
Roof plates for cable entry
Overview
A rectangular cutout (with an angled panel fold along the rear
edge) enables cables to be routed into the cubicle. With the aid
of a similarly angled slide plate, the remaining gap can be
closed down to the maximum cable diameter.
This roof plate (without cable entry) has degree of protection
IP40. If a higher degree of protection is required, it is recommended to use a foam rubber profile or to foam out the
remaining gap.
Cubicle depth
mm
mm
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
NSE0_01278
400
600
800
8MF3480
8MF3481
8MF3482
1 unit
1 unit
1 unit
1.000
1.000
1.000
800
400
600
800
8MF3485
8MF3486
8MF3487
1 unit
1 unit
1 unit
1.000
1.000
1.000
900
400
600
800
8MF3490
8MF3491
8MF3492
1 unit
1 unit
1 unit
1.000
1.000
1.000
1000
400
600
800
8MF3493
8MF3494
8MF3495
1 unit
1 unit
1 unit
1.000
1.000
1.000
1200
400
600
800
8MF3496
8MF3497
8MF3498
1 unit
1 unit
1 unit
1.000
1.000
1.000
Cubicle width
Cubicle depth
PS*/
P. unit
Weight
per PU
approx.
mm
mm
Foam rubber 20 20
1800
1 unit
0.025
DT Article No.
Price
per PU
kg
8MF3500
Siemens LV 50 2014
3/11
Siemens AG 2014
Enclosure
Roofs
Busbar roof plates
Overview
Roof plates to accommodate a busbar
The same cover panel must be fitted on both sides of the roof.
Cubicle width
Cubicle depth
mm
mm
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
8MF3510
8MF3511
1 unit
1 unit
5.000
5.000
800
600
800
8MF3513
8MF3514
1 unit
1 unit
5.000
5.000
900
600
800
8MF3516
8MF3517
1 unit
1 unit
5.000
5.000
1000
600
800
8MF3518
8MF3520
1 unit
1 unit
5.000
5.000
1200
600
800
8MF3521
8MF3522
1 unit
1 unit
5.000
5.000
PS*/
P. unit
Weight
per PU
approx.
NSE0_01279
600
DT Article No.
Price
per PU
kg
mm
8MF3527
8MF3528
1 unit
1 unit
1.231
1.690
NSE0_01280
3/12
Siemens LV 50 2014
Siemens AG 2014
Enclosure
Roofs
Perforated roof plates
Overview
The simplest method to dissipate the heat arising in a cubicle is
to provide openings in the roof plate. To achieve degree of
protection IP20, no solid objects with a diameter >12 mm must
be able to penetrate into the cubicle.
In the open area left by the frame, our perforated roof plate has
8 8 mm holes in a 10 mm grid. In the version for degree of
protection IP40, an additional fine-meshed grille is integrated
below the holes.
Cubicle depth
Effective ventilation
cross-section
mm
mm
cm2
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
NSE0_01276
400
600
800
610
1230
1840
8MF3400
8MF3401
8MF3402
1 unit
1 unit
1 unit
0.100
0.100
0.100
800
400
600
800
870
1740
2610
8MF3405
8MF3406
8MF3407
1 unit
1 unit
1 unit
0.100
0.100
0.100
900
400
600
800
1000
2000
3000
8MF3410
8MF3411
8MF3412
1 unit
1 unit
1 unit
0.100
0.100
0.100
1000
400
600
800
1120
2250
3380
8MF3413
8MF3414
8MF3415
1 unit
1 unit
1 unit
0.100
0.100
0.100
1200
400
600
800
1380
2760
4150
8MF3416
8MF3417
8MF3418
1 unit
1 unit
1 unit
0.100
0.100
0.100
400
600
800
360
710
1070
8MF3420
8MF3421
8MF3422
1 unit
1 unit
1 unit
0.100
0.100
0.100
800
400
600
800
500
1010
1510
8MF3425
8MF3426
8MF3427
1 unit
1 unit
1 unit
0.100
0.100
0.100
900
400
600
800
580
1160
1740
8MF3430
8MF3431
8MF3432
1 unit
1 unit
1 unit
0.100
0.100
0.100
1000
400
600
800
650
1300
1950
8MF3433
8MF3434
8MF3435
1 unit
1 unit
1 unit
0.100
0.100
0.100
1200
400
600
800
800
1600
2410
8MF3436
8MF3437
8MF3438
1 unit
1 unit
1 unit
0.100
0.100
0.100
Siemens LV 50 2014
3/13
Siemens AG 2014
Enclosure
Roofs
Perforated ventilation roofs
Overview
In the case of a ventilation roof, a tray is mounted above the perforated roof plate. This tray prevents vertically falling water drops
from entering the cubicle.
Cubicle width
Cubicle depth
mm
mm
cm2
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
NSE0_01277
400
600
800
610
1230
1840
8MF3440
8MF3441
8MF3442
1 unit
1 unit
1 unit
10.000
10.000
10.000
800
400
600
800
870
1740
2610
8MF3445
8MF3446
8MF3447
1 unit
1 unit
1 unit
10.000
10.000
10.000
900
400
600
800
1000
2000
3000
8MF3450
8MF3451
8MF3452
1 unit
1 unit
1 unit
10.000
10.000
10.000
1000
400
600
800
1120
2250
3380
8MF3453
8MF3454
8MF3455
1 unit
1 unit
1 unit
10.000
10.000
10.000
1200
400
600
800
1380
2760
4150
8MF3456
8MF3457
8MF3458
1 unit
1 unit
1 unit
10.000
10.000
10.000
3/14
600
400
600
800
360
710
1070
8MF3460
8MF3461
8MF3462
1 unit
1 unit
1 unit
10.000
10.000
10.000
800
400
600
800
500
1010
1510
8MF3465
8MF3466
8MF3467
1 unit
1 unit
1 unit
10.000
10.000
10.000
900
400
600
800
580
1160
1740
8MF3470
8MF3471
8MF3472
1 unit
1 unit
1 unit
10.000
10.000
10.000
1000
400
600
800
650
1300
1950
8MF3473
8MF3474
8MF3475
1 unit
1 unit
1 unit
10.000
10.000
10.000
1200
400
600
800
800
1600
2410
8MF3476
8MF3477
8MF3478
1 unit
1 unit
1 unit
10.000
10.000
10.000
Siemens LV 50 2014
Siemens AG 2014
Enclosure
Accessories
Locking systems
Locking system
Large T-handle
Without
Small T-handle
Latch handle
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
8MF3110
1 unit
0.125
With
8MF3111
1 unit
0.170
Without
8MF3112
1 unit
0.210
Wing handle
Without
8MF3113
1 unit
0.227
Wing handle
With
8MF3114
1 unit
0.300
PS*/
P. unit
Weight
per PU
approx.
kg
Dimensions
DT Article No.
Price
per PU
7 Square
8MF3100
1 unit
0.250
8MF3101
1 unit
0.250
8MF3102
1 unit
0.250
8MF3103
1 unit
0.250
8MF3104
1 unit
0.250
8MF3105
1 unit
0.250
PS*/
P. unit
Weight
per PU
approx.
mm
x Triangular
Double-bit key
kg
Locking systems
For cubicle height
DT Article No.
Price
per PU
kg
Locking rods
1800
2000
2200
8MF9060
8MF9061
8MF9062
1 unit
1 unit
1 unit
0.380
0.430
0.480
8MF9065
8MF9066
1 unit
1 unit
0.364
0.364
8ME8468
8ME8473
1 unit
1 unit
0.033
0.023
8MF9070
8MF9071
1 unit
1 unit
0.165
0.165
8MF9072
1 unit
0.210
8MF9073
8MF9074
1 unit
1 unit
0.300
0.350
7 Square, 8 mm
8MF9081
1 unit
0.015
Double-bit, 3 mm
Double-bit, 5 mm
8MF9082
8MF9083
1 unit
1 unit
0.015
0.020
PS*/
P. unit
Weight
per PU
approx.
Locks
right, with key retainer
left, with key retainer
Espagnolette lock accessory sets
for single-wing door
for double-wing door
Handles
Actuator pins
Keys
Version
Dimensions
mm
7 Square
8MF9052
1 unit
0.200
Double-bit key
3
5
8MF9055
8MF9056
1 unit
1 unit
0.200
0.200
DT Article No.
Price
per PU
kg
Siemens LV 50 2014
3/15
Siemens AG 2014
Enclosure
Accessories
Defined openings
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
1 unit
0.346
mm
Door stay for one door wing
kg
8MC4300
NSE0_01361
NSE0_01292
3/16
Siemens LV 50 2014
Siemens AG 2014
Expansion
4/2
4/3
Exteriors
Base parts
Accessories
4/4
4/8
4/15
4/16
4/17
Interiors
Internal partitions
Mounting of devices
Fastening plates
PE expansion
Accessories
Siemens LV 50 2014
Siemens AG 2014
Expansion
Exteriors
Base parts
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
1 unit
1.043
kg
Height = 100 mm. Feet are supplied in the color of the cubicle (1 set = 4 units)
NSE0_01281
8MF4050
Plinths
A plinth increases the floor clearance of the cubicle and simplifies cable entry and routing. Removal of the side cover panels
Cubicle width
Cubicle depth
mm
mm
permits cables to be routed between cubicles in an interconnected suite. Plinths are supplied in the color of the cubicle.
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
kg
NSE0_01282
400
600
800
8MF4010
8MF4011
8MF4012
1 unit
1 unit
1 unit
7.100
8.000
8.800
800
400
600
800
8MF4015
8MF4016
8MF4017
1 unit
1 unit
1 unit
8.000
8.800
9.600
900
400
600
800
8MF4020
8MF4021
8MF4022
1 unit
1 unit
1 unit
8.200
9.200
10.000
1000
400
600
800
8MF4023
8MF4024
8MF4025
1 unit
1 unit
1 unit
7.428
8.124
8.982
1200
400
600
800
8MF4026
8MF4027
8MF4028
1 unit
1 unit
1 unit
8.124
9.000
9.768
600
400
600
800
8MF4030
8MF4031
8MF4032
1 unit
1 unit
1 unit
11.500
12.600
14.200
800
400
600
800
8MF4035
8MF4036
8MF4037
1 unit
1 unit
1 unit
12.600
14.200
15.700
900
400
600
800
8MF4040
8MF4041
8MF4042
1 unit
1 unit
1 unit
13.400
14.800
16.400
1000
400
600
800
8MF4043
8MF4044
8MF4045
1 unit
1 unit
1 unit
12.926
14.496
16.066
1200
400
600
800
8MF4046
8MF4047
8MF4048
1 unit
1 unit
1 unit
15.600
17.500
18.600
NSE0_01283
4/2
Siemens LV 50 2014
Siemens AG 2014
Expansion
Exteriors
Accessories
Price
PS*/
per PU P. unit
Weight
per PU
approx.
1 unit
1.248
kg
Eyebolts, washers and nuts
8MF4220
Transport brackets
Transport brackets are designed for the crane-lifting of cubicle
suites. Unlike eyebolts, a transport bracket over the whole length
of a cubicle suite is able to ensure that the tensile loads from the
lifting tackle are taken up evenly and simultaneously.
Version
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
8MF4221
1 unit
6.200
8MF4222
1 unit
6.200
Price
PS*/
per PU P. unit
Weight
per PU
approx.
8MF4225
1 unit
9.800
8MF4226
1 unit
9.800
kg
1 pair of brackets
per running meter of cubicle
up to 2400 mm in length
in RAL 3000
1 pair of brackets
NSE0_01290
Transport rails
Transport rails are mounted above or below cubicles or cubicle
suites. They serve to transport heavy fully configured cubicles or
cubicle suites.
Version
DT Article No.
kg
1 pair of rails
per running meter of cubicle
up to 2400 mm in length
in RAL 3000
1 pair of rails
NSE0_01291
Siemens LV 50 2014
4/3
Siemens AG 2014
Expansion
Interiors
Internal partitions
Cubicle depth
mm
mm
1800
400
600
800
2000
2200
DT Article No.
Price PS*/
per PU P. unit
Weight
per PU
approx.
8MF4150
8MF4151
8MF4152
1 unit
1 unit
1 unit
6.071
10.065
14.059
400
600
800
8MF4160
8MF4161
8MF4162
1 unit
1 unit
1 unit
6.764
11.229
15.694
400
600
800
8MF4170
8MF4171
8MF4172
1 unit
1 unit
1 unit
7.456
12.392
17.328
kg
NSE0_01288
Shelves
Shelves can be supplied for fixed mounting or as withdrawable
shelves on telescopic rails. The maximum width of a shelf is
Version
DT Article No.
Price PS*/
per PU P. unit
Weight
per PU
approx.
kg
NSE0_01329
Shelves
Versions
Cubicle width
in mm
Cubicle depth
in mm
600
400
600
800
8MF4800
8MF4801
8MF4802
1 unit
1 unit
1 unit
5.418
7.699
9.979
800
400
600
800
8MF4805
8MF4806
8MF4807
1 unit
1 unit
1 unit
7.110
10.175
13.241
600
400
600
800
8MF4810
8MF4811
8MF4812
1 unit
1 unit
1 unit
3.500
4.000
4.400
800
400
600
800
8MF4815
8MF4816
8MF4817
1 unit
1 unit
1 unit
4.200
4.700
5.100
600
400
600
800
8MF4840
8MF4841
8MF4842
1 unit
1 unit
1 unit
4.886
7.697
10.398
800
400
600
800
8MF4845
8MF4846
8MF4847
1 unit
1 unit
1 unit
6.098
9.541
12.474
600
400
600
800
8MF4850
8MF4851
8MF4852
1 unit
1 unit
1 unit
4.700
5.200
5.600
800
400
600
800
8MF4855
8MF4856
8MF4857
1 unit
1 unit
1 unit
4.700
5.200
5.600
4/4
Siemens LV 50 2014
Siemens AG 2014
Expansion
Interiors
Internal partitions
Telescopic rails
Telescopic rails can be used for maximum shelf withdrawal
(= cubicle depth minus 20 mm). They are designed for loads up
to 50 kg per rail pair and are retained in their end position.
Busbar length
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
NSE0_01330
mm
kg
300
8MF4860
1 unit
0.500
600
8MF4861
1 unit
0.500
Price
PS*/
per PU P. unit
Weight
per PU
approx.
kg
NSE0_01316
Versions
Height in mm
- 1800
- 2000
- 2200
8ME1461
8ME1462
8ME1463
1 unit
1 unit
1 unit
3.701
4.204
4.636
Width in mm
- 600
- 800
- 900
- 1000
- 1200
8ME1464
8ME1465
8ME1466
8ME1467
8ME1468
1 unit
1 unit
1 unit
1 unit
1 unit
1.339
1.771
1.987
2.203
2.634
Depth in mm
- 400
- 600
- 800
8ME1470
8ME1471
8ME1472
1 unit
1 unit
1 unit
0.718
1.150
1.572
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
kg
Joining sheets
8ME8812
1 unit
0.090
Mounting brackets
Without spare set
With spare set
8ME8813
8ME8811
1 unit
1 unit
0.010
0.075
Siemens LV 50 2014
4/5
Siemens AG 2014
Expansion
Interiors
Internal partitions
Vertical profile bars
Vertical profile bars divide a cubicle in its width. They have the
same rows of holes as the side frame profile of the 8MF cubicle.
Cubicle height
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
mm
kg
8MF4380
1 unit
5.702
2000
8MF4381
1 unit
6.204
2200
8MF4382
1 unit
7.000
Price
PS*/
per PU P. unit
Weight
per PU
approx.
NSE0_01319
1800
DT Article No.
kg
C-profile bars for cubicle
NSE0_01320
Versions
C30
- Width in mm:
Y 600
Y 800
Y 900
Y 1000
Y 1200
- Depth in mm:
Y 400
Y 600
Y 800
C40
- Width in mm:
Y 600
Y 800
Y 900
Y 1000
Y 1200
- Depth in mm:
Y 400
Y 600
Y 800
C50
- Width in mm:
Y 600
Y 800
Y 900
Y 1000
Y 1200
- Depth in mm:
Y 400
Y 600
Y 800
4/6
Siemens LV 50 2014
8MF4400
8MF4401
8MF4402
8MF4403
8MF4404
1 unit
1 unit
1 unit
1 unit
1 unit
0.445
0.590
0.662
1.534
0.880
8MF4405
8MF4406
8MF4407
1 unit
1 unit
1 unit
0.481
0.747
1.005
8MF4410
8MF4411
8MF4412
8MF4413
8MF4414
1 unit
1 unit
1 unit
1 unit
1 unit
0.490
0.649
0.728
1.687
0.968
8MF4415
8MF4416
8MF4417
1 unit
1 unit
1 unit
0.529
0.822
1.106
8MF4420
8MF4421
8MF4422
8MF4423
8MF4424
1 unit
1 unit
1 unit
1 unit
1 unit
0.538
0.714
0.801
1.856
1.065
8MF4425
8MF4426
8MF4427
1 unit
1 unit
1 unit
0.582
0.904
1.216
Siemens AG 2014
Expansion
Interiors
Internal partitions
Serrated (toothed) bars
Version
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
kg
Serrated bars
Versions
U-shape, for cubicle width/depth:
- 600 mm
- 800 mm
- 900 mm
NSE0_01336
- 1000 mm
- 1200 mm
Plain, for cubicle width/depth:
- 600 mm
- 800 mm
- 900 mm
- 1000 mm
- 1200 mm
All-round
8MF4922
8MF4923
8MF4924
1 unit
1 unit
1 unit
1.184
1.581
1.605
8MF4925
8MF4926
1 unit
1 unit
1.784
2.142
8MF4932
8MF4933
8MF4934
1 unit
1 unit
1 unit
0.984
1.381
1.405
8MF4935
8MF4936
1 unit
1 unit
1.584
1.942
On request
Siemens LV 50 2014
4/7
Siemens AG 2014
Expansion
Interiors
Mounting of devices
NSE0_01322
Cubicle width
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
mm
mm
1800
600
800
900
1000
1200
8MF4500
8MF4501
8MF4502
8MF4503
8MF4504
1 unit
1 unit
1 unit
1 unit
1 unit
22.010
28.840
32.250
34.651
41.714
kg
2000
600
800
900
1000
1200
8MF4510
8MF4511
8MF4512
8MF4513
8MF4514
1 unit
1 unit
1 unit
1 unit
1 unit
24.430
32.050
35.860
39.670
47.290
2200
600
800
900
1000
1200
8MF4520
8MF4521
8MF4522
8MF4523
8MF4524
1 unit
1 unit
1 unit
1 unit
1 unit
26.894
35.260
39.470
43.680
39.470
Price
PS*/
per PU P. unit
Weight
per PU
approx.
1 unit
0.280
DT Article No.
kg
8MF4530
NSE0_01323
Brackets
4/8
Siemens LV 50 2014
Siemens AG 2014
Expansion
Interiors
Mounting of devices
Mounting plates
Mounting plates (2.5 mm galvanized sheet) are used for cubicle
installations and for the mounting of devices (in installed state
only).
The plates are screwed to the rear side frame profiles of the
cubicle frame. If they are to be depth-adjustable, they must be
ordered in conjunction with additional vertical supporting bars.
Effective height
Cubicle width
DT Article No.
Price
PS*/
per PU P. unit
8MF
mm
mm
Weight
per PU
approx.
kg
Mounting plates
Versions
For all cubicle heights
NSE0_01324
- 100
600
800
900
1000
1200
8MF4600
8MF4601
8MF4602
8MF4603
8MF4604
1 unit
1 unit
1 unit
1 unit
1 unit
2.500
6.167
8.000
9.833
13.500
- 200
600
800
900
1000
1200
8MF4610
8MF4611
8MF4612
8MF4613
8MF4614
1 unit
1 unit
1 unit
1 unit
1 unit
4.500
8.167
10.000
11.833
15.500
- 400
600
800
900
1000
1200
8MF4620
8MF4621
8MF4622
8MF4623
8MF4624
1 unit
1 unit
1 unit
1 unit
1 unit
6.500
10.167
12.000
13.833
17.500
- 800
600
800
900
1000
1200
8MF4630
8MF4631
8MF4632
8MF4633
8MF4634
1 unit
1 unit
1 unit
1 unit
1 unit
8.500
12.167
14.000
15.833
19.500
- 1200
600
800
900
1000
1200
8MF4640
8MF4641
8MF4642
8MF4643
8MF4644
1 unit
1 unit
1 unit
1 unit
1 unit
11.000
14.667
16.500
18.333
22.000
600
800
900
1000
1200
8MF4660
8MF4661
8MF4662
8MF4663
8MF4664
1 unit
1 unit
1 unit
1 unit
1 unit
24.000
26.000
28.000
30.000
32.000
600
800
900
1000
1200
8MF4670
8MF4671
8MF4672
8MF4673
8MF4674
1 unit
1 unit
1 unit
1 unit
1 unit
26.000
28.000
30.000
32.000
34.000
600
800
900
1000
1200
8MF4680
8MF4681
8MF4682
8MF4683
8MF4684
1 unit
1 unit
1 unit
1 unit
1 unit
28.000
30.000
32.000
34.000
36.000
Siemens LV 50 2014
4/9
Siemens AG 2014
Expansion
Interiors
Mounting of devices
Side mounting plates
Side mounting plates (2.5 mm galvanized sheet) are used for
cubicle installations and for the mounting of devices (in installed
state only).
The plates are screwed between the side frame profiles of the
cubicle frame.
Cubicle depth
mm
mm
1800
400
600
800
2000
2200
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
8MF4550
8MF4551
8MF4552
1 unit
1 unit
1 unit
7.968
14.344
20.728
400
600
800
8MF4555
8MF4556
8MF4557
1 unit
1 unit
1 unit
8.908
16.074
23.238
400
600
800
8MF4560
8MF4561
8MF4562
1 unit
1 unit
1 unit
9.852
17.803
25.753
Price
PS*/
per PU P. unit
Weight
per PU
approx.
kg
NSE0_01325
Cubicle height
NSE0_01326
The bolts, nuts, etc. required for a circuit breaker are not
included in the scope of delivery.
Cubicle depth
Cubicle width
DT Article No.
mm
mm
400
600
800
900
1000
1200
8MF4700
8MF4701
8MF4702
8MF4703
8MF4704
1 unit
1 unit
1 unit
1 unit
1 unit
4.446
4.960
5.218
5.474
5.990
600
600
800
900
1000
1200
8MF4710
8MF4711
8MF4712
8MF4713
8MF4714
1 unit
1 unit
1 unit
1 unit
1 unit
4.960
5.474
5.732
5.988
6.504
800
600
800
900
1000
1200
8MF4720
8MF4721
8MF4722
8MF4723
8MF4724
1 unit
1 unit
1 unit
1 unit
1 unit
5.824
6.338
6.596
6.852
7.368
Price
PS*/
per PU P. unit
Weight
per PU
approx.
kg
mm
mm
50
50
75
125
On request
On request
On request
75
25
37.5
50
100
125
On request
On request
On request
On request
On request
NSE0_01327
Duct height
4/10
Siemens LV 50 2014
DT Article No.
kg
Siemens AG 2014
Expansion
Interiors
Mounting of devices
Standard mounting rails
Specify order requirements in plain text.
Unmounted standard mounting rails are not included in the
scope of delivery!
Designation
Dimensions
DT Article No.
Price
PS*/
per PU P. unit
mm
Standard mounting rail 1.5 LL Zn
kg
35 7.5
On request
35 15
On request
G32/15/9
On request
NSE0_01328
G rail EN 50 035
Weight
per PU
approx.
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
1 unit
3.000
Price
PS*/
per PU P. unit
Weight
per PU
approx.
NSE0_01350
mm
Device plate with standard mounting rail
and cable ducts
900
kg
8MF4570
Sets
DT Article No.
Qty
1800
8MF4320
1 unit
2.700
kg
2000
8MF4321
1 unit
3.300
2200
8MF4322
1 unit
3.650
NSE0_01294
mm
Siemens LV 50 2014
4/11
Siemens AG 2014
Expansion
Interiors
Mounting of devices
Punched bars
The row of holes is set back 50 mm from the front edge of the
frame. Additional supporting bars are required to permit installation in wider cubicles or alternative depth positioning.
The 19-inch punched bars for captive nuts (or alternatively for
self-tapping screws) possess the same profile as a swing frame.
They are screwed to the upright section of the side frame of a
600 mm wide cubicle.
For cubicle height
DT Article No.
Price
PS*/
per PU P. unit
NSE0_01331
mm
Weight
per PU
approx.
kg
Punched bars
With M6 captive nut profile
- 1800
- 2000
- 2200
8MF4870
8MF4871
8MF4872
1 unit
1 unit
1 unit
5.658
6.438
6.918
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
mm
kg
3 HU
6 HU
9 HU
12 HU
-----
8MF4880
8MF4881
8MF4882
8MF4883
1 unit
1 unit
1 unit
1 unit
3.000
3.500
4.500
5.000
35/34 HU
39/38 HU
44/43 HU
1800
2000
2200
8MF4886
8MF4887
8MF4888
1 unit
1 unit
1 unit
15.442
16.242
17.242
NSE0_01332
which are to be screwed to the upright stay of the side frame. Its
surface is galvanized.
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
mm
NSE0_01333
the hinging on either the left or the right. The hinging side is
switched by rotating the frame and crossbars. If an order
contains no specifications as to the mounting position, the swing
frame is mounted centrally with left-hand hinges.
Surface: galvanized.
Further swing frame dimensions on request.
kg
600
800
900
8MF4894
8MF4895
8MF4896
1 unit
1 unit
1 unit
7.396
9.139
9.803
1000
1200
8MF4897
8MF4898
1 unit
1 unit
10.649
12.595
Price
PS*/
per PU P. unit
Weight
per PU
approx.
DT Article No.
kg
4/12
Stop
8MF4820
1 unit
0.105
8MF4821
1 unit
0.038
8MF4822
1 unit
4.000
Siemens LV 50 2014
Siemens AG 2014
Expansion
Interiors
Mounting of devices
Heavy-duty swing frames
A heavy-duty swing frame comprises welded 19-inch profiles.
Such swing frames are designed only for the 8MF cubicle
version and are able to accept loads up to 300 kg.
DT Article No.
Price
PS*/
per PU P. unit
Weight
per PU
approx.
1 unit
25.000
mm
43 HU
900
kg
8MF4885
NSE0_01351
Lock trims
The lock trim permits easier opening and closing of the swing
frame. It is normally fitted with a handle and espagnolette lock
for a 3 mm double-bit key, though other locking systems are also
possible. Its surface is galvanized.
Hinged frame height
(1 height unit (HU) = 44.45 mm)
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
1 unit
8.000
PS*/
P. unit
Weight
per PU
approx.
kg
8MF4823
NSE0_01352
44 HU/43 HU
19" shelves
19" shelves are intended for fixed installation in the swing frame.
Their surface is galvanized.
Shelf depth
DT Article No.
Price
per PU
mm
kg
250
8MF4824
1 unit
3.500
400
8MF4825
1 unit
5.000
NSE0_01353
Siemens LV 50 2014
4/13
Siemens AG 2014
Expansion
Interiors
Mounting of devices
Device panel
A device panel is installed either to the left or to the right of the
swing frame and makes up the full width of the cubicle. It can be
used to mount switches, devices and other instruments.
Height
(1 HU = 44.45 mm)
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
1 unit
11.300
Price
PS*/
per PU P. unit
Weight
per PU
approx.
kg
8MF4828
NSE0_01354
44 HU/43 HU
DT Article No.
mm
kg
Cover plates
8MF4831
8MF4832
8MF4833
1 unit
1 unit
1 unit
0.600
0.900
1.300
4 HU
5 HU
6 HU
8MF4834
8MF4835
8MF4836
1 unit
1 unit
1 unit
1.700
2.100
2.500
7 HU
44/43 HU
8MF4837
8MF4827
1 unit
1 unit
2.900
14.600
For 7 HU
8MF4838
1 unit
2.500
8MF4826
1 unit
0.300
NSE0_01355
1 HU
2 HU
3 HU
Frames
4/14
Siemens LV 50 2014
Siemens AG 2014
Expansion
Interiors
Fastening plates
Overview
Version
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
NSE0_01380
Fastening plates
Lamp plate
8MF4890
1 unit
1.200
Heater plate
8MF4891
1 unit
1.500
NSE0_01378
8MF4892
1 unit
0.300
8MF4893
1 unit
0.200
NSE0_01381
NSE0_01379
Thermostat plate
Siemens LV 50 2014
4/15
Siemens AG 2014
Expansion
Interiors
PE expansion
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
kg
4/16
Grounding plate
8MF4910
1 unit
0.103
8MF4911
1 unit
0.033
Grounding bar
made of copper 30 5 mm
for cubicle width:
600 mm
800 mm
900 mm
1000 mm
1200 mm
8MF4912
8MF4913
8MF4914
8MF4915
8MF4916
1 unit
1 unit
1 unit
1 unit
1 unit
0.937
1.246
1.402
1.556
1.865
Grounding bars
made of copper 30 10 mm
for cubicle width:
600 mm
800 mm
900 mm
1000 mm
1200 mm
8MF4942
8MF4943
8MF4944
8MF4945
8MF4946
1 unit
1 unit
1 unit
1 unit
1 unit
1.874
2.492
2.804
3.112
3.730
Siemens LV 50 2014
Siemens AG 2014
Expansion
Interiors
Accessories
DT Article No.
Price
per PU
PS*/
P. unit
Weight
per PU
approx.
NSE0_01293
kg
Plastic
8MF4301
1 unit
0.010
Sheet steel
A4 upright
A4 horizontal
A3 horizontal
8MF4302
8MF4303
8MF4304
1 unit
1 unit
1 unit
1.472
1.621
2.519
PS*/
P. unit
Weight
per PU
approx.
DT Article No.
Price
per PU
kg
Single
1 NO contact + 1 NC contact
8MF4310
1 unit
0.201
Double
1 NO contact + 2 NC contacts
8MF4311
1 unit
0.189
PS*/
P. unit
Weight
per PU
approx.
Sealing strip
Version
DT Article No.
Price
per PU
kg
Sealing strip for
Roof plate
Door
Side and rear panel
8MF8810
8MF8806
8MF8807
1 unit
1 unit
1 unit
Siemens LV 50 2014
2.000
5.000
5.000
4/17
Siemens AG 2014
Expansion
Notes
4/18
Siemens LV 50 2014
Siemens AG 2014
Preconfigured Cubicles
5/2
Ventilated cubicles
8MF2 (IP30/40) cubicles
5/4
IP54 cubicles
8MF2, 8MF5/6 cubicles
5/9
EMC cubicles
8MF5, 8MF6 cubicles
5/12
Earthquake-resistant cubicles
8MF6 cubicles
Siemens LV 50 2014
Siemens AG 2014
Preconfigured Cubicles
Ventilated Cubicles
8MF2 (IP30/40) cubicles
Overview
Compact designs and high packing densities demand special
measures for heat dissipation. We offer ventilated cubicles in a
preconfigured version, i.e. the complete cubicle can be ordered
with one article number.
Features
Perforated roof plates
Doors with 5 rows of ventilation slots
High air throughput per unit of area thanks to special
SBL ventilation design
IP30 and IP40 degrees of protection available
Scope of delivery
8MF2
Standard version
Welded, 2.5 mm steel sheet,
zinkcor coated and powder coated
Frame
Enclosure parts
Rear panel
Edge-folded,
sheet steel 1.5 mm,
powder coated
Side panels
(can be optionally
ordered)
Edge-folded,
sheet steel 1.5 mm,
powder coated
Door
Trim strip
Petrol
Roof plate
Paint finish
Cubicle color
Frame color
RAL 7035
Degree of protection
NSE0_01392
Height
1800 mm
2000 mm
2200 mm
Width
600 mm
800 mm
900 mm
1000 mm
1200 mm
Depth
400 mm
600 mm
800 mm
Degree of
protection
IP30
IP40
Installation
Suite installation
Ventilation
Ventilated
2
1 Welded frame
2 Door (right-hand hinge)
with ventilation slots (SBL)
3 Side panel
5/2
Siemens LV 50 2014
4 Ventilation roof
panel (SBL)
5 Rear panel
6 Trim strip
8
0
2
6
8
9
0
2
4
6
8
3
4
R
B
Siemens AG 2014
Preconfigured Cubicles
Ventilated Cubicles
8MF2 (IP30/40) cubicles
Ventilation cross-sections in the doors
Effective
ventilation
cross-section
Ventilation cross-section
per row of ventilation
slots
mm
cm
mm
cm
mm
IP30
600
400
600
800
518.40
725.70
933.10
800
400
600
800
710.40
994.60
1278.70
600
800
900
1000
1200
1000
400
600
800
902.40
1263.30
1624.30
1200
400
600
800
1094.40
1532.10
1969.90
86
131
146
156
172
IP40
NSE0_01344
NSE0_01349
600
800
900
1000
1200
52
72
80
93
104
400
600
800
311.00
435.40
559.80
800
400
600
800
426.40
596.70
767.20
1000
400
600
800
541.40
758.00
974.50
1200
400
600
800
656.60
919.20
1181.90
Siemens LV 50 2014
5/3
Siemens AG 2014
Preconfigured Cubicles
IP54 Cubicles
8MF2, 8MF5/6 cubicles
Overview
Scope of delivery
8MF2
8MF5
8MF6
Frame
Welded,
zinkcor coated and
powder coated
Screwed (unassembled),
zinkcor coated and
powder coated
Screwed (assembled),
zinkcor coated and
powder coated
Sheet steel 4 mm
Sheet steel 4 mm
Surface
Powder coating
Finely textured surface for indoor installation RAL 7035
Standard version
Door
Front door (right-hand hinges) or double-wing doors with Front door (right-hand hinges) or double-wing doors with miniminimum width = 1000 mm
mum width = 1200 mm
Trim strip
Petrol
Roof plate
Degree of protection
Paint finish
Width
1800 mm
2000 mm
2200 mm
600 mm
800 mm
900 mm
1000 mm
1200 mm
6
8
9
0
2
Depth
400 mm
600 mm
800 mm
Degree of
protection
IP54
Installation
Stand-alone installation
with two side panels
Suite installation
without side panels
5/4
Siemens LV 50 2014
8 MF 5 7 7 7 7 7
8 MF 6 7 7 7 7 7
8
0
2
4
6
8
5
Height
1800 mm
2000 mm
2200 mm
Width
600 mm
800 mm
900 mm
1200 mm
Depth
400 mm
600 mm
800 mm
Degree of
protection
IP54
Installation
Stand-alone installation
with two side panels
Suite installation
without side panels
8
0
2
6
8
9
2
4
6
8
5
Siemens AG 2014
Preconfigured Cubicles
IP54 Cubicles
8MF2, 8MF5/6 cubicles
Design
8MF2 system cubicles
Features
Frame comprising two side frame sections and four lateral
stays
Fully welded
Profile of the side frames folded 5 times
Scope of delivery
A standard frame is delivered with the following standard
enclosure parts
Rear panel
Plain roof
Door with espagnolette lock and lock inserts
Side panels (in case of stand-alone installation)
Mounting of the enclosure parts using self-tapping screws;
no additional grounding measures are necessary therefore
Seal
7
3
NSE0_01357
2
1
2
3
4
Welded frame
Door (right-hand hinge)
Side panel
Roof panel
5 Rear panel
6 Zierblende
7 Seal (only for degree
of protection IP54)
Mounting with special bolts and contact washers which comply with the grounding regulations
8MF5 and 8MF6 system cubicles
Features
Frame comprising two side frame sections and four lateral
stays
Angle-welded side frame
Screwed lateral stays
Profile of the side frames folded 5 times
Type of delivery of the 8MF5: unassembled
Type of delivery of the 8MF6: assembled
Seal
The cubicle is secured to the floor using 4 holes with
a diameter of 14.5 mm in both bottom lateral stays.
7
3
NSE0_01371a
2
1
2
3
4
Screwed frame
Door (right-hand hinge)
Side panel
Roof panel
5 Rear pane
6 Trim strip
7 Seal (only for degree
of protection IP54)
Siemens LV 50 2014
5/5
Siemens AG 2014
Preconfigured Cubicles
IP54 Cubicles
8MF2, 8MF5/6 cubicles
Width
Depth
DT Stand-alone installation
Article No.
mm
mm
mm
Price
per PU
Price
per PU
Weight
per PU
approx.
kg
2000
2200
600
400
600
800
8MF2864-5E
8MF2866-5E
8MF2868-5E
85.000
90.000
100.000
8MF2864-5R
8MF2866-5R
8MF2868-5R
85.000
90.000
100.000
800
400
600
800
8MF2884-5E
8MF2886-5E
8MF2888-5E
95.000
100.000
110.000
8MF2884-5R
8MF2886-5R
8MF2888-5R
95.000
100.000
110.000
900
400
600
800
8MF2894-5E
8MF2896-5E
8MF2898-5E
100.000
110.000
120.000
8MF2894-5R
8MF2896-5R
8MF2898-5R
100.000
110.000
120.000
1000
400
600
800
8MF2804-5E
8MF2806-5E
8MF2808-5E
100.000
110.000
120.000
8MF2804-5R
8MF2806-5R
8MF2808-5R
100.000
110.000
120.000
1200
400
600
800
8MF2824-5E
8MF2826-5E
8MF2828-5E
115.000
125.000
135.000
8MF2824-5R
8MF2826-5R
8MF2828-5R
115.000
125.000
135.000
600
400
600
800
8MF2064-5E
8MF2066-5E
8MF2068-5E
105.000
105.000
120.000
8MF2064-5R
8MF2066-5R
8MF2068-5R
105.000
105.000
120.000
800
400
600
800
8MF2084-5E
8MF2086-5E
8MF2088-5E
110.000
120.000
165.000
8MF2084-5R
8MF2086-5R
8MF2088-5R
110.000
120.000
165.000
900
400
600
800
8MF2094-5E
8MF2096-5E
8MF2098-5E
125.000
135.000
145.000
8MF2094-5R
8MF2096-5R
8MF2098-5R
125.000
135.000
145.000
1000
400
600
800
8MF2004-5E
8MF2006-5E
8MF2008-5E
130.000
145.000
155.000
8MF2004-5R
8MF2006-5R
8MF2008-5R
130.000
145.000
155.000
1200
400
600
800
8MF2024-5E
8MF2026-5E
8MF2028-5E
145.000
155.000
165.000
8MF2024-5R
8MF2026-5R
8MF2028-5R
145.000
155.000
165.000
600
400
600
800
8MF2264-5E
8MF2266-5E
8MF2268-5E
130.000
135.000
145.000
8MF2264-5R
8MF2266-5R
8MF2268-5R
130.000
135.000
145.000
800
400
600
800
8MF2284-5E
8MF2286-5E
8MF2288-5E
135.000
145.000
175.000
8MF2284-5R
8MF2286-5R
8MF2288-5R
135.000
145.000
175.000
900
400
600
800
8MF2294-5E
8MF2296-5E
8MF2298-5E
140.000
165.000
175.000
8MF2294-5R
8MF2296-5R
8MF2298-5R
140.000
165.000
175.000
1000
400
600
800
8MF2204-5E
8MF2206-5E
8MF2208-5E
165.000
175.000
185.000
8MF2204-5R
8MF2206-5R
8MF2208-5R
165.000
175.000
185.000
1200
400
600
800
8MF2224-5E
8MF2226-5E
8MF2228-5E
185.000
195.000
210.000
8MF2224-5R
8MF2226-5R
8MF2228-5R
185.000
195.000
210.000
Note
Package size for cubicles = 1 unit,
i.e. 1 unit or a multiple thereof can be ordered.
If a door with left-hand hinges is required, add the suffix "-Z" to
the Article No. and "left-hand hinge" to the text.
Special size available on request.
5/6
Siemens LV 50 2014
Siemens AG 2014
Preconfigured Cubicles
IP54 Cubicles
8MF2, 8MF5/6 cubicles
8MF5 cubicle (screwed, unassembled)
Height
Width
Depth
DT Stand-alone installation
Article No.
mm
mm
Price
per PU
Price
per PU
kg
mm
Weight
per PU
approx.
kg
2000
2200
600
400
600
800
8MF5864-5E
8MF5866-5E
8MF5868-5E
85.000
90.000
100.000
8MF5864-5R
8MF5866-5R
8MF5868-5R
85.000
90.000
100.000
800
400
600
800
8MF5884-5E
8MF5886-5E
8MF5888-5E
95.000
100.000
110.000
8MF5884-5R
8MF5886-5R
8MF5888-5R
95.000
100.000
110.000
900
400
600
800
8MF5894-5E
8MF5896-5E
8MF5898-5E
100.000
110.000
120.000
8MF5894-5R
8MF5896-5R
8MF5898-5R
100.000
110.000
120.000
1200
400
600
800
8MF5824-5E
8MF5826-5E
8MF5828-5E
115.000
125.000
135.000
8MF5824-5R
8MF5826-5R
8MF5828-5R
115.000
125.000
135.000
600
400
600
800
8MF5064-5E
8MF5066-5E
8MF5068-5E
105.000
105.000
120.000
8MF5064-5R
8MF5066-5R
8MF5068-5R
105.000
105.000
120.000
800
400
600
800
8MF5084-5E
8MF5086-5E
8MF5088-5E
110.000
120.000
165.000
8MF5084-5R
8MF5086-5R
8MF5088-5R
110.000
120.000
165.000
900
400
600
800
8MF5094-5E
8MF5096-5E
8MF5098-5E
125.000
135.000
145.000
8MF5094-5R
8MF5096-5R
8MF5098-5R
125.000
135.000
145.000
1200
400
600
800
8MF5024-5E
8MF5026-5E
8MF5028-5E
145.000
155.000
165.000
8MF5024-5R
8MF5026-5R
8MF5028-5R
145.000
155.000
165.000
600
400
600
800
8MF5264-5E
8MF5266-5E
8MF5268-5E
130.000
135.000
145.000
8MF5264-5R
8MF5266-5R
8MF5268-5R
130.000
135.000
145.000
800
400
600
800
8MF5284-5E
8MF5286-5E
8MF5288-5E
135.000
145.000
175.000
8MF5284-5R
8MF5286-5R
8MF5288-5R
135.000
145.000
175.000
900
400
600
800
8MF5294-5E
8MF5296-5E
8MF5298-5E
140.000
165.000
175.000
8MF5294-5R
8MF5296-5R
8MF5298-5R
140.000
165.000
175.000
1200
400
600
800
8MF5224-5E
8MF5226-5E
8MF5228-5E
185.000
195.000
210.000
8MF5224-5R
8MF5226-5R
8MF5228-5R
185.000
195.000
210.000
Note
Package size for cubicles = 1 unit,
i.e. 1 unit or a multiple thereof can be ordered.
If a door with left-hand hinges is required, add the suffix "-Z" to
the Article No. and "left-hand hinge" to the text.
Special size available on request.
Siemens LV 50 2014
5/7
Siemens AG 2014
Preconfigured Cubicles
IP54 Cubicles
8MF2, 8MF5/6 cubicles
8MF6 cubicle (screwed, assembled)
Height
Width
Depth
DT Stand-alone installation
Article No.
mm
mm
Price
per PU
mm
Price
per PU
Weight
per PU
approx.
kg
2000
5
2200
600
400
600
800
8MF6864-5E
8MF6866-5E
8MF6868-5E
85.000
90.000
100.000
8MF6864-5R
8MF6866-5R
8MF6868-5R
85.000
90.000
100.000
800
400
600
800
8MF6884-5E
8MF6886-5E
8MF6888-5E
95.000
100.000
110.000
8MF6884-5R
8MF6886-5R
8MF6888-5R
95.000
100.000
110.000
900
400
600
800
8MF6894-5E
8MF6896-5E
8MF6898-5E
100.000
110.000
120.000
8MF6894-5R
8MF6896-5R
8MF6898-5R
100.000
110.000
120.000
1200
400
600
800
8MF6824-5E
8MF6826-5E
8MF6828-5E
115.000
125.000
135.000
8MF6824-5R
8MF6826-5R
8MF6828-5R
115.000
125.000
135.000
600
400
600
800
8MF6064-5E
8MF6066-5E
8MF6068-5E
105.000
105.000
120.000
8MF6064-5R
8MF6066-5R
8MF6068-5R
105.000
105.000
120.000
800
400
600
800
8MF6084-5E
8MF6086-5E
8MF6088-5E
110.000
120.000
165.000
8MF6084-5R
8MF6086-5R
8MF6088-5R
110.000
120.000
165.000
900
400
600
800
8MF6094-5E
8MF6096-5E
8MF6098-5E
125.000
135.000
145.000
8MF6094-5R
8MF6096-5R
8MF6098-5R
125.000
135.000
145.000
1200
400
600
800
8MF6024-5E
8MF6026-5E
8MF6028-5E
145.000
155.000
165.000
8MF6024-5R
8MF6026-5R
8MF6028-5R
145.000
155.000
165.000
600
400
600
800
8MF6264-5E
8MF6266-5E
8MF6268-5E
130.000
135.000
145.000
8MF6264-5R
8MF6266-5R
8MF6268-5R
130.000
135.000
145.000
800
400
600
800
8MF6284-5E
8MF6286-5E
8MF6288-5E
135.000
145.000
175.000
8MF6284-5R
8MF6286-5R
8MF6288-5R
135.000
145.000
175.000
900
400
600
800
8MF6294-5E
8MF6296-5E
8MF6298-5E
140.000
165.000
175.000
8MF6294-5R
8MF6296-5R
8MF6298-5R
140.000
165.000
175.000
1200
400
600
800
8MF6224-5E
8MF6226-5E
8MF6228-5E
185.000
195.000
210.000
8MF6224-5R
8MF6226-5R
8MF6228-5R
185.000
195.000
210.000
Note
Package size for cubicles = 1 unit,
i.e. 1 unit or a multiple thereof can be ordered.
If a door with left-hand hinges is required, add the suffix "-Z" to
the Article No. and "left-hand hinge" to the text.
Special size available on request.
5/8
Siemens LV 50 2014
Siemens AG 2014
Preconfigured Cubicles
EMC Cubicles
8MF5, 8MF6 cubicles
Overview
Electromagnetic compatibility (EMC)
EMC measures are becoming more and more important both for
individual devices and complete systems. The reasons are in
particular:
System processing speeds are becoming ever faster
Systems are becoming more extensive
Many different device types may be encountered in a single
system
Various power levels may be present in a single system
More and more external interference sources
Definition of EMC
Directive 2004/108/EC, Article 2, Paragraph 1d:
"Electromagnetic compatibility means the ability of equipment to
function satisfactorily in its electromagnetic environment without
introducing intolerable electromagnetic disturbances to other
equipment in that environment."
To ensure a system's EMC, it is necessary that its devices emit
only limited interference and are at the same time immune as far
as possible to external interference. In other words, the level of
interference emitted by a device must lie below the interference
threshold of any second device installed in the same location,
taking into consideration the influence of the interference transmission path (keyword: "Interference immunity").
For such evaluations, the whole frequency range from 0 Hz to an
upper limit frequency determined by the device concerned,
which could well lie in the GHz range, must be taken into account. To be able to meet the overall requirements, it is imperative that the devices satisfy certain demands, and that they comply with the defined limit values regarding interference emission
and interference immunity.
Design of an EMC cubicle
The 8MF EMC cubicle is available in the version:
galvanized, with approx. 55 dB attenuation.
How does the PC cubicle differ from a system cubicle?
The following differences can be listed compared to a standard
SIVACON sicube 8MF system cubicle:
Paint finish only on the outer surfaces of doors and rear/side
panels
Conductive seals pre-mounted for doors and rear/side panels
Additional standard base plate
The whole cubicle frame and all enclosure parts are galvanized,
which serves to extend the shield attenuation measures to the
cubicle installations.
The visible (exterior) areas of the cubicle enclosure are painted.
Doors, roof plate, side panel and rear panel are provided with
special RF seals and each screwed to the cubicle frame at
several points. Special EMC cubicles can be supplied in all
standard dimensions, but only up to a width of 900 mm and only
with single-wing doors. The cubicle enclosure parts can also be
supplied with ventilation slots and integrated RF seals.
The shield attenuation of the 8MF EMC cubicles is approx. 60 dB
over a frequency range from 10 kHz to 1 GHz (corresponds to
an attenuation factor of 1000). By comparison, standard 8MF
cubicles provide a shield attenuation of up to 20 dB.
Siemens LV 50 2014
5/9
Siemens AG 2014
Preconfigured Cubicles
EMC Cubicles
8MF5, 8MF6 cubicles
Order designation
8 MF 5 7 7 7 7 7 7
8 MF 6 7 7 7 7 7 7
Height
Width
Depth
1800 mm
2000 mm
2200 mm
600 mm
800 mm
900 mm
400 mm
600 mm
800 mm
Degree of
protection
IP40
Installation
Stand-alone installation
4
E
Galvanized
Width
Depth
DT 8MF5
Article No.
Price
per PU
Weight DT 8MF6
per PU
Article No.
approx.
kg
Price
per PU
Weight
per PU
approx.
kg
mm
mm
mm
1800
600
400
600
800
8MF5864-4ES
8MF5866-4ES
8MF5868-4ES
90.000
100.000
110.000
8MF6864-4ES
8MF6866-4ES
8MF6868-4ES
90.000
100.000
110.000
800
400
600
8MF5884-4ES
8MF5886-4ES
100.000
110.000
8MF6884-4ES
8MF6886-4ES
100.000
110.000
900
400
600
8MF5894-4ES
8MF5896-4ES
110.000
120.000
8MF6894-4ES
8MF6896-4ES
110.000
120.000
600
400
600
800
8MF5064-4ES
8MF5066-4ES
8MF5068-4ES
115.000
125.000
135.000
8MF6064-4ES
8MF6066-4ES
8MF6068-4ES
115.000
125.000
135.000
800
400
600
8MF5084-4ES
8MF5086-4ES
120.000
130.000
8MF6084-4ES
8MF6086-4ES
120.000
130.000
900
400
600
8MF5094-4ES
8MF5096-4ES
135.000
145.000
8MF6094-4ES
8MF6096-4ES
135.000
145.000
600
400
600
800
8MF5264-4ES
8MF5266-4ES
8MF5268-4ES
140.000
145.000
155.000
8MF6264-4ES
8MF6266-4ES
8MF6268-4ES
140.000
145.000
155.000
800
400
600
8MF5284-4ES
8MF5286-4ES
145.000
155.000
8MF6284-4ES
8MF6286-4ES
145.000
155.000
900
400
600
8MF5294-4ES
8MF5296-4ES
150.000
175.000
8MF6294-4ES
8MF6296-4ES
150.000
175.000
2000
2200
Note
Package size for cubicles = 1 unit,
i.e. 1 unit or a multiple thereof can be ordered.
If a door with left-hand hinges is required, add the suffix "-Z" to
the Article No. and "left-hand hinge" to the text.
Special size available on request.
5/10
Siemens LV 50 2014
Siemens AG 2014
Preconfigured Cubicles
EMC Cubicles
8MF5, 8MF6 cubicles
Configuration
Principles of EMC
Siemens LV 50 2014
5/11
Siemens AG 2014
Preconfigured Cubicles
Earthquake-Resistant Cubicles
8MF6 cubicles
Overview
8MF6 system cubicle in an earthquake-resistant version
The demand for system cubicles in regions with a higher risk of
earthquakes continues to rise. For this reason, we have been the
first system cubicle manufacturer to develop a generally earthquake- resistant system cubicle. The design has been subjected
to thorough vibration testing (simulated earthquakes). When developing this system cubicle, we were able to make use of the
considerable know-how already present in the company in the
field of earthquake-resistant switchgear (SIVACON sicube). This
enabled us to derive the necessary measures for adaptation of
the 8MF6 cubicle.
This cubicle is a certified earthquake-resistant system cubicle.
An appropriate weight distribution and center of gravity are prescribed by the certification and serve as a guideline for interior
installations.
The devices and components installed by the customer must
also satisfy the relevant demands. Installations can be mounted
in the system cubicle in three planes (rear, center and front), the
front plane being intended for 19" expansions.
By eliminating cost-intensive cross-bonding, we have not only
achieved a favorable price, but are also able to perform deliveries at short notice (approx. 4 weeks after receipt of an order).
NSE0_01372
5/12
Siemens LV 50 2014
4
5
Strengthening plate
Siemens AG 2014
Preconfigured Cubicles
Earthquake-Resistant Cubicles
8MF6 cubicles
Scope of delivery
8MF6
Earthquake-resistant version
Frame
Bracing stay
Enclosure parts
Rear panel or fixed masking frame
Side panels
Support columns
One support column each in the right and left side frame, screwed to the partition panel
Mounting plates
Door
Sheet steel 1.5 mm, powder coated, front door (right-hand hinges) or double-wing doors
with width = 900 mm, espagnolette lock with double-bit key according to DIN 43668,
lock insert with 3 mm pin, 180 hinges (opening angle on cubicle suites approx. 130)
Trim strip
Petrol
Roof plate
Base plate
Paint finish
Cubicle color
Frame color
RAL 7035
Degree of protection
Order designations
8 MF 6 7 7 7 7 7 7
Height
2200 mm
Width
600 mm
900 mm
Depth
600 mm
Degree of
protection
IP40
IP54
6
9
6
4
1)
Earthquake-resistant
installation
(without side panels)
Installation
1)
K E
Width
Depth
mm
mm
mm
DT Article No.
Price
per PU
Weight
per PU
approx.
kg
600
600
8MF6266-4KE
155.000
900
600
8MF6296-4KE
185.000
600
600
8MF6266-5KE
155.000
900
600
8MF6296-5KE
185.000
Note
Package size for cubicles = 1 unit,
i.e. 1 unit or a multiple thereof can be ordered.
If a door with left-hand hinges is required, add the suffix "-Z" to
the Article No. and "left-hand hinge" to the text.
Special size available on request.
Siemens LV 50 2014
5/13
Siemens AG 2014
Preconfigured Cubicles
Notes
5/14
Siemens LV 50 2014
Siemens AG 2014
Special Cubicles
6/2
General information
6/2
6/3
6/5
6/6
PC Cubicles
8MF2 cubicles
Siemens LV 50 2014
Siemens AG 2014
Special Cubicles
General information
Overview
We are able to offer our customers individual system cubicle
solutions. In this way, customers are able to concentrate on their
own expertise and can be confident of lasting success on the
basis of standardized system solutions.
Customer-specific
Just-in-time delivery of our customized system cubicles straight
to the assembly line helps our customers in designing their
products.
Flexible delivery
We supply system cubicles at all integration levels:
in parts
as screwed or welded unequipped distribution boards
mechanically prepared
pre-wired
Global availability
We possess our own production facilities and cooperate with
partner manufacturers all over the world, enabling us to satisfy
the worldwide demand of global players.
6
Special applications of cubicles
for protection and control systems
Overview
Protection cubicle (LSA)
The LSA cubicle is intended specifically for operation in substation control and protection systems. It can be prepared with a 19"
swing frame, power supply unit (device panel alongside the
swing frame), cover plates, cable brackets and rear mounting
plate.
Configurations with cable ducts and standard mounting rails can
also be supplied on request.
6/2
Siemens LV 50 2014
Siemens AG 2014
Special Cubicles
Cubicles for transportation systems
Overview
8MF cubicles in practical applications
CP2000
Project-specific 8MF cubicles were developed and mechanically prepared to meet the requirements of Siemens Transportation Systems, one of the leading partners of international railway
operators.
The 8MF cubicle offers convincing security, stability and quality,
satisfying all the enhanced demands for railway applications.
It has thus been the cubicle of choice for the projects
DESIRO Slovenia, CP2000 Portugal, DESIRO South-West Train
Great Britain and AVE Spain.
Project CP2000
For the CP2000 project, the 8MF frame profile was welded in
accordance with the SGK 2.2 standard (see illustration on the
left). The mechanical interior installation comprises:
19" expansions
Device holders
Cable ducts
Flexible cable conduits
Standard mounting rails
Air-conditioning with heat exchangers
6
8MF frame profile
welded in accordance
with the SGK 2.2
welding standard
Siemens LV 50 2014
6/3
Siemens AG 2014
Special Cubicles
Cubicles for transportation systems
Project AVE
The high-speed trains from Siemens set new standards in highspeed rail travel. For this project, a specific, mechanically prepared cubicle was developed on the basis of our 8MF cubicles.
Features to be emphasized are the unconventional cubicle form
and the sophisticated surface treatment of the individual components.
Here, too, our design department was able to contribute valuable know-how to promote an optimum product development.
6/4
Siemens LV 50 2014
Siemens AG 2014
Special Cubicles
Cubicles for control systems
Overview
System cubicle suite with cooling units also in redundant
configuration
8MF6 cubicles are able to accommodate compact, high-performance heat exchanger components as single-circuit or multiplecircuit cooling systems with cooling capacities up to 100 kW.
Expansion and control system components have been developed on the basis of technical specifications and in cooperation
with renowned partners of Siemens AG.
The illustration below shows a system for power stations with a
cooling capacity of 20 kW. The heat exchanger is installed in an
8MF cubicle. A compartment is incorporated at the head of the
heat exchanger.
Compartment
at the head
of the heat
exchanger
Heat exchanger
installed in
an 8MF cubicle
Siemens LV 50 2014
6/5
Siemens AG 2014
Special Cubicles
PC Cubicles
8MF2 cubicles
Overview
How does the PC cubicle differ from a system cubicle?
The standard door is replaced by:
An upper compartment door
- Two espagnolette locks
- Monitor cutout with inspection pane
- Perforated shelf
- At bottom, perforated shelf for the computer
A hinged flap (center)
- Height approx. 150 mm with 90o stay,
plastic handle (black)
- Behind, a telescopic shelf for a keyboard
- Pull-out side extension for a mousepad
A lower compartment door
- Two espagnolette locks
- Telescopic shelf for a printer
Order designations
A variant of the 8MF system cubicles can also be ordered as a
PC cubicle. The PC cubicle is a robust construction and is thus
suitable for use in industrial environments.
All benefits of the system cubicles, such as self-tapping screw
terminals, protective conductor concept and high cubicle stability, are to be found also in the PC cubicle.
8 MF 2 7 7 7 7 7 7
Height
1800 mm
2000 mm
2200 mm
Width
600 mm
Depth
600 mm
800 mm
Degree of
protection
IP40
Installation
Stand-alone installation
4
E
PC cubicles
Ordering
Please inquire for prices and delivery times.
Special sizes are also available on request.
6/6
Siemens LV 50 2014
Siemens AG 2014
SIVACON 8MF/8MR
System Lighting
7/2
7/4
LED lights
Siemens LV 50 2014
Siemens AG 2014
Overview
Rating of energy-saving lamps Rating of conventional incandescent
lamps
9W
60 W
11 W
75 W
20 W
100 W
Socket outlets
Socket outlets are mounted on 35 mm support rails and connected without screws by way of three clamping terminals
(for stranded and solid wires 0.5 ... 2.5 mm2).
The maximum operational voltage is 250 V. The enclosure is
light-gray UL94 V-Q plastic.
The slimline light is also available with country-specific socket
outlets.
Plug-on mounts
Slimline light with motion detector
Cubicle lighting
The cubicle light is specifically suitable for operation in switchgear and controlgear cubicles.
In the case of lights with a SCHUKO socket outlet, the outlet is
incorporated with an on/off switch or motion detector in the
plastic enclosure.
The flat slimline light with motion detector or on/off switch is ideal
for operation in cubicles and enclosures with a high density of
built-in electrical/electronic components.
All lights are fitted with environmentally-friendly energy-saving
lamps.
DT Article No.
Price
per PU
PU
(UNIT,
SET, M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
Cubicle lighting
Compact lights (355 x 65 x 70 mm)
Without cover
NSE0_01334
If a cubicle light is provided with a plug-on mount, it remains immune to vibration and can be removed at any later time without
tools.
8MF4900
8MF4900
1 unit
181
2.230
8MF4901
1 unit
181
1.115
240 V, 50 Hz, 11 W
8MF4900-1A
1 unit
181
1.000
8MF4904
1 unit
181
1.000
8MF4900-1B
1 unit
181
1.100
8MF4900-1BB
1 unit
181
1.100
8MR2023-0KL25
5 units
181
0.043
8MR2012-0KL25
5 units
181
0.040
Covers
8MF4908
1 10 units
181
0.100
8MF4902
1 unit
181
0.600
8MF4905
1 unit
181
0.600
As hand-held lamp
8MF4906
1 unit
181
0.600
With cover
230 V, 50 Hz, 11 W
With 3 m cable
230 V, 50 Hz, 11 W
With 3 m cable (orange-colored)
230 V, 50 Hz, 11 W
Spare parts for compact lights
8MF4902
7/2
Siemens LV 50 2014
Siemens AG 2014
DT Article No.
Price
per PU
PU
(UNIT,
SET, M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
8MF5900-1A
1 unit
181
0.400
8MF5900
1 unit
181
0.600
8MF5900-1C
1 unit
181
0.500
8MF5900-2A
1 unit
181
0.400
8MF5900-1B
1 unit
181
0.600
8MF5900-2B
1 unit
181
0.500
8MF5910-1A
1 unit
181
0.400
8MF5910
1 unit
181
0.600
8MF5910-1C
1 unit
181
0.500
8MF5910-2A
1 unit
181
0.400
8MF5910-1B
1 unit
181
0.600
8MF5910-2B
1 unit
181
0.500
8MF5900-3A
1 unit
181
0.400
8MF5900-3B
1 unit
181
0.500
8MF5910-3A
1 unit
181
0.400
8MF5910-3B
1 unit
181
0.500
VDE
8MF9300
3 units
180
0.500
CEBEC
8MF9301
3 units
181
0.020
8MF9305
1 unit
181
0.500
8MF4903
3 units
181
0.100
1 NO + 1 NC
8MF4310
1 unit
180
0.201
1 NO + 2 NC
8MF4311
1 unit
180
0.189
8MF5900-1A
230 V, 50/60 Hz, 11 W
with motion detector
8MF5910-1A
24 ... 48 V DC, 11 W,
with pushbutton (On/Off)
24 ... 48 V DC, 11 W,
with motion detector
Socket outlets
Socket outlets with fuse
Plug-on mounts
Plug-on mount
NSE0_01335
8MF4903
Position switches
Position switch for mounting as door contact
8MF4310/8MF4311
More information
For more information see Industry Mall under
"Low-Voltage Power Distribution and Electrical Installation
Technology" --> "System Cubicles, System Lighting and System
Air-Conditioning"--> "SIVACON 8MF/8MR System Lighting"
Siemens LV 50 2014
7/3
Siemens AG 2014
Overview
Features
Technical specifications
W
5
Light output corresponds to that of
a 75 W incandescent lamp
Endurance
At 20C
60000
Connection
General
AC version
DC version
Dimensions
The LED lights with on/off switch are particularly suitable for
operation in cubicles and enclosures with a high density of
built-in electrical/electronic components.
Length
mm
351
Light diameter
mm
32
mm
34
mm
52
Storage
Mounting width
Degree of protection
IP20
Safety class
II (protective insulation)
Note:
Delivery does not include plugs, sockets and cables for electrical connection. These must be ordered separately.
See Accessories on next page.
Version
DT Article No.
Price
per PU
PU
(UNIT,
SET, M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
8MR2200-1A
1 unit
181
0.136
24 ... 48 V DC
8MR2201-1A
1 unit
181
0.132
8MR2200-1B
1 unit
181
0.200
24 ... 48 V DC
8MR2201-1B
1 unit
181
0.132
8MR2200-1A
8MR2201-1A
Screw fixing
8MR2200-1B
7/4
Siemens LV 50 2014
Siemens AG 2014
Accessories
Version
DT Article No.
Price
per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
8MR2210-1A
1 10 units
181
0.010
8MR2210-2A
1 10 units
181
0.010
8MR2210-3A
1 10 units
181
0.010
8MR2210-4A
1 10 units
181
0.010
8MR2210-1B
5 units
181
0.182
8MR2210-2B
5 units
181
0.175
8MR2210-3B
5 units
181
0.610
8MR2210-4B
5 units
181
0.175
8MR2210-1C
5 units
181
0.109
8MR2210-2C
5 units
181
0.105
8MR2210-3C
5 units
181
0.105
8MR2210-4C
5 units
181
0.105
1 NO + 1 NC
8MF4310
1 unit
180
0.201
1 NO + 2 NC
8MF4311
1 unit
180
0.189
Cables
Connecting cable with socket and open end,
each 2 m long
For connection of a lamp (switch side)
8MR2210-1B
8MR2210-1C
8MR2210-3C
Position switches
Position switch for mounting as door contact
8MF4310/8MF4311
More information
For more information see Industry Mall under
"Low-Voltage Power Distribution and Electrical Installation
Technology" --> "System Cubicles, System Lighting and System
Air-Conditioning"--> "SIVACON 8MF/8MR System Lighting"
Siemens LV 50 2014
7/5
Siemens AG 2014
7/6
Siemens LV 50 2014
Siemens AG 2014
SIVACON 8MR
System Air-Conditioning
8/2
Introduction
8/5
Filter fans
8/8
8/9
Heat exchangers
8/10
Heater units
8/11
Fan heaters
8/13
Thermostats, hygrostats,
hygrotherms, switching modules
Siemens LV 50 2014
Siemens AG 2014
Overview
Control supply voltage or voltage for switching capacity
24/48 V DC
115 V AC
230 V AC
400/440 V AC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Switching capacities up to 16 A
--
--
--
--
--
--
--
--
--
Switching modules 16 A
--
--
--
Available or possible
-- Not available or not possible
On request
The figures in brackets indicate inductive switching capacities.
8/2
Siemens LV 50 2014
Siemens AG 2014
Benefits
Installing air-conditioning equipment in SIVACON sicube cubicle
systems ensures high fault tolerance for switchgear and controlgear assemblies and consequently a high level of availability of
machines and plants.
Application
In control cubicles, depending on the ambient conditions
(e.g. heat, cold, air humidity etc.), there may be a tendency to
overheat or for mold to form. In such cases the cubicles should
be air-conditioned. The following air-conditioning equipment is
available for this purpose:
Filter fans
Air conditioners/cooling devices
Heat exchangers, air/air
Heaters/thermostats
When selecting individual air-conditioning components, the ambient temperature, the power losses of the installed devices, the
maximum permissible device temperature and the heat dissipation capacity of the cubicle used are the factors to be considered. In addition, it is necessary to take into account the required
degree of protection.
Optimum, extended
air duct for the system
air-conditioning
35 C
Hot air from the
equipment and
busbars
55 C
Cubicle
Cold air
recirculation
25 C
NSE0_01390a
More information
Further information see Industry Mall under
"Building Technologies":
"Low-Voltage Power Distribution and Electrical Installation
Technology" --> "SIVACON Power Distribution Boards and
Busbar Trunking Systems" --> "System Cubicles, System
Lighting and System Air-Conditioning" --> "SIVACON 8MR
System Air-Conditioning"
Siemens LV 50 2014
8/3
Siemens AG 2014
Step 1: Dimensions
Determine the cubicle's height, width and
depth
A = 1.8 H (W + D) + 1.4 W D
A = 1.4 W (H + D) + 1.8 D H
A = 1.4 D (H + W) + 1.8 W H
A = 1.8 W H + 1.4 W D + D H
A = 1.4 W (H + D) + D H
A = 1.4 W H + 0.7 W D + D H
Example: Cubicle, free-standing on all sides, 2000 mm high, 800 mm wide, 600 mm deep.
A = 1.8 m 2.0 m (0.8 m+ 0.6 m) + 1.4 m 0.8 m 0.6 m = 5.712 m2
Accordingly, the cubicle has an area of 5.712 m2.
T= Ti - Tu
8/4
Siemens LV 50 2014
25
20
15
700
500
10
5
200
100
1
3
4
5
6
7
8
Control cubicle surface m2
2000
1000
500
300
200
150
100
50
35
25
15
10
I201_18816
V = f x Pv/T
30
1200
1000
T
T 20
T 15 K
T 10 K
5
K
K
PH = A x k x T
10
11
I201_18815
Siemens AG 2014
Overview
Filter fans are the most cost-effective method - after heat dissipation through the surface of a control cubicle and/or ventilation
openings in the enclosure parts of the control cubicles - for dissipating heat from control cubicles.
However, this can only achieve a control cubicle temperature
which lies above the ambient temperature.
Standard filter fans optionally in EMC version
When filter fans are used for air-conditioning, the cubicle must
have openings which allow electromagnetic radiation to pass in
and out unobstructed. Filter fans in EMC version offer additional
protection when higher requirements are imposed on electromagnetic compatibility.
Voltage
m3/h
mm
Input
rating
at
50 Hz
Color
DT Article No.
RAL
Price
PU
per PU (UNIT,
SET,
M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
Filter fans
50/60 Hz except 8MR6 402-2LV41
IP54
25
92 92
115 AC
230 AC
230 AC
12
12
12
7035
7032
7035
8MR6411-5LV10
8MR6423-2LV10
8MR6423-5LV10
1
1
1
1 unit
1 unit
1 unit
181
181
181
0.330
0.330
0.330
63
20
20
20
7035
7032
7035
8MR6411-5LV25
8MR6423-2LV25
8MR6423-5LV25
1
1
1
1 unit
1 unit
1 unit
181
181
181
0.800
0.800
0.800
115
20
20
7035
7035
8MR6411-5LV30
8MR6423-5LV30
160
18
18
18
7035
7032
7035
8MR6411-5LV45
8MR6423-2LV45
8MR6423-5LV45
1
1
1
1 unit
1 unit
1 unit
181
181
181
1.030
1.030
1.400
1
1
1 unit
1 unit
181
181
1.400
1.400
250
223 223 24 DC
115 AC
230 AC
230 AC
16
43
45
45
7032
7035
7032
7035
8MR6402-2LV41
8MR6411-5LV41
8MR6423-2LV41
8MR6423-5LV41
1
1
1
1
1 unit
1 unit
1 unit
1 unit
181
181
181
181
1.840
1.840
1.840
1.840
580
64
64
64
7035
7032
7035
8MR6411-5LV60
8MR6423-2LV60
8MR6423-5LV60
1
1
1
1 unit
1 unit
1 unit
181
181
181
3.400
1.840
3.400
930
115
135
7035
7035
8MR6411-5LV80
8MR6423-5LV80
1
1
1 unit
1 unit
181
181
4.600
4.600
63
20
20
7035
7035
8MR6511-5LV25
8MR6523-5LV25
1
1
1 unit
1 unit
181
181
0.800
0.800
115
20
20
7035
7035
8MR6511-5LV30
8MR6523-5LV30
1
1
1 unit
1 unit
181
181
1.030
1.030
160
18
18
7035
7035
8MR6511-5LV45
8MR6523-5LV45
1
1
1 unit
1 unit
181
181
1.400
1.400
250
43
45
7035
7035
8MR6511-5LV41
8MR6423-5LV41
1
1
1 unit
1 unit
181
181
1.840
1.840
580
64
64
7035
7035
8MR6511-5LV60
8MR6523-5LV60
1
1
1 unit
1 unit
181
181
1.840
1.840
930
115
135
7035
7035
8MR6511-5LV80
8MR6523-5LV80
1
1
1 unit
1 unit
181
181
4.600
4.600
8MR6411-5LV10
IP55
8MR6511-5LV10
Siemens LV 50 2014
8/5
Siemens AG 2014
Voltage
m3/h
mm
Input
rating
at
50 Hz
Color
DT Article No.
RAL
Price
PU
per PU (UNIT,
SET,
M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
115
20
20
7035
7035
8MR6411-6LV30
8MR6423-6LV30
1
1
1 unit
1 unit
181
181
1.030
1.030
160
18
18
7035
7035
8MR6411-6LV45
8MR6423-6LV45
1
1
1 unit
1 unit
181
181
1.400
1.400
250
43
45
7035
7035
8MR6411-6LV41
8MR6423-6LV41
1
1
1 unit
1 unit
181
181
1.840
1.840
8MR6411-6LV30
EMC filter fans IP55
IP55
115
20
20
7035
7035
8MR6511-6LV30
8MR6523-6LV30
1
1
1 unit
1 unit
181
181
1.030
1.030
160
18
18
7035
7035
8MR6511-6LV45
8MR6523-6LV45
1
1
1 unit
1 unit
181
181
1.400
1.400
250
43
45
7035
7035
8MR6511-6LV41
8MR6523-6LV41
1
1
1 unit
1 unit
181
181
1.840
1.840
PS*/
P. unit
PG
Weight
per PU
approx.
8MR6511-6LV30
Outlet filters
Size
Dimensions
Color
Cutout
External
dimensions
W H
Mounting Cover
depth
grille
height
mm
mm
mm
mm
DT Article No.
RAL
Price
per PU
PU
(UNIT,
SET,
M)
kg
8MR6400-5GV67
92 92
105 105
12
4.5
7032
7035
8MR6400-2GV10
8MR6400-5GV10
1
1
1 unit
1 unit
181
181
0.060
0.060
125 125
148 148
23
5.5
7032
7035
8MR6400-2GV25
8MR6400-5GV25
1
1
1 unit
1 unit
181
181
0.170
0.170
177 177
204 204
26
7035
8MR6400-5GV30
1 unit
181
0.350
223 223
250 250
32
7032
7035
8MR6400-2GV45
8MR6400-5GV45
1
1
1 unit
1 unit
181
181
0.500
0.500
292 292
323 323
33
6.5
7032
7035
8MR6400-2GV67
8MR6400-5GV67
1
1
1 unit
1 unit
181
181
0.800
0.800
125 125
148 148
23
5.5
7035
8MR6500-5GV25
1 unit
181
0.170
177 177
204 204
26
7035
8MR6500-5GV30
1 unit
181
0.350
223 223
250 250
32
7035
8MR6500-5GV45
1 unit
181
0.500
292 292
323 323
33
6.5
7035
8MR6500-5GV67
1 unit
181
0.800
8MR6500-5GV67
EMC outlet filters IP54
3
177 177
204 204
26
7035
8MR6400-6GV30
1 unit
181
0.350
223 223
250 250
32
7035
8MR6400-6GV45
1 unit
181
0.500
177 177
204 204
26
7035
8MR6500-6GV30
1 unit
181
0.350
223 223
250 250
32
7035
8MR6500-6GV45
1 unit
181
0.500
8MR6400-6GV30
8/6
Siemens LV 50 2014
Siemens AG 2014
Dimensions
DT Article No.
W H
Price
per PU
PU
(UNIT,
SET, M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
mm
Filter mats for filter fans or outlet filters for IP54
1
89 89
8MR6000-0AM10
1 5 units
181
0.050
118 118
8MR6000-0AM25
1 5 units
181
0.050
171 171
8MR6000-0AM30
1 5 units
181
0.050
216 216
8MR6000-0AM45
1 5 units
181
0.085
283 283
8MR6000-0AM67
1 5 units
181
0.100
PU
PS*/
(UNIT, P. unit
SET, M)
PG
Weight
per PU
approx.
8MR6000-0AM10
External
dimensions
W H D
m3/h
mm
mm
Voltage
Input
rating
DT Article No.
Price
per PU
kg
Roof filter fans IP44 for 50/60 Hz, color RAL 7035
405
345 265
115
230
40/45
40/45
8MR6311-5DL40
8MR6323-5DL40
1
1
1 unit
1 unit
181
181
8.200
8.200
690
345 265
115
230
100/130
100/130
8MR6311-5DL42
8MR6323-5DL42
1
1
1 unit
1 unit
181
181
8.200
8.200
--
--
8MR6000-5DE40
1 unit
181
4.500
PU
PS*/
(UNIT, P. unit
SET, M)
PG
Weight
per PU
approx.
181
3.300
8MR6323-5DL40
Roof outlet filters IP44, color RAL 7035
Without fan 345 265
420 340 83
8MR6000-5DE40
Voltage
45
230
Series
DT Article No.
Price
per PU
kg
LE 019
8MR2190-1A
1 unit
8MR2190-1A
Siemens LV 50 2014
8/7
Siemens AG 2014
Overview
Where ambient temperatures are higher than the permissible
device temperatures, air conditioners must be used.
All units operate with CFC-free refrigerants. Air conditioners dehumidify the air inside the control cubicle.
Cooling devices for door or side mounting and
roof mounting
Two separate air circuits ensure that no ambient air enters the
control cubicle. High-performance radial fans provide for good
air circulation in the control cubicle.
Intelligent standard electronics with maximum customer benefits:
Simple temperature control with an integrated thermostat
Test mode
Temperature limits
Start-up delay
Door contact function
Alarm contact
Local diagnostics
UL-approved
CE-approved
Versions
Air conditioners/cooling devices are available in the following
versions:
For side and door mounting
For roof mounting
Air capacity
internal/
external
mm
m3/h
DT Article No.
Price
per PU
PU
PS*/
(UNIT, P. unit
SET,
M)
PG
Weight
per PU
approx.
kg
1)
8
8MR6423-5SK20
1)
380
280
280/280
8MR6423-5EG04
1 unit
181
23.000
640
400
330/570
8MR6423-5EG06
1 unit
181
27.000
820
440
330/570
8MR6423-5EG08
1 unit
181
34.000
10502)
570
570/860
8MR6423-5SK10
1 unit
181
43.000
15502)
880
570/1050
8MR6423-5SK15
1 unit
181
44.000
20502)
1080
860/1050
8MR6423-5SK20
1 unit
181
66.000
1220
860/1450
8MR6440-5EG30
1 unit
181
86.000
1780
1780
1450/1450
8MR6440-5EG40
1 unit
181
88.000
5800
2340
1450/2900
8MR6440-5EG60
1 unit
181 156.000
2)
Cooling devices for roof mounting, degree of protection inside IP54/outside IP34, color RAL 7035
Cooling
capacity
Air capacity
internal/
external
mm
m3/h
DT Article No.
Price
per PU
PU
PS*/
(UNIT, P. unit
SET,
M)
PG
Weight
per PU
approx.
kg
270
235/330
8MR6423-5DE04
1 unit
181
24.000
820
510
330/570
8MR6423-5DE08
1 unit
181
37.700
1150
550
570/1010
8MR6423-5DE12
1 unit
181
46.000
1550
810
860/1820
8MR6423-5DE15
1 unit
181
50.000
2050
1190
1050/1820
8MR6423-5DE20
1 unit
181
56.000
8/8
2900
1210
860/3410
8MR6440-5DE30
1 unit
181
88.000
3850
1630
1450/3410
8MR6440-5DE40
1 unit
181
90.000
Siemens LV 50 2014
Siemens AG 2014
Overview
Air/air principle
Heat exchangers designed on the air/air principle function with
two completely separate air circuits: an internal and an external
circuit. One fan draws in cool external air. A second fan then
directs the warmed air inside the cubicle past a large-area
finned partition element, which passes the heat to the external
circuit.
Note:
The devices can be surface mounted and fully integrated.
Dimensions
W H D
Air capacity
internal/
external
W/K
mm
m3/h
DT Article No.
Price
per PU
PU
PS*/
(UNIT, P. unit
SET,
M)
PG
Weight
per PU
approx.
kg
140
316 771 93
570/570
8MR6423-5ML36
1 1 unit
181
7.000
80
240
1050/1050
8MR6423-5ML80
1 1 unit
181
17.000
8MR6423-5ML80
Siemens LV 50 2014
8/9
Siemens AG 2014
Overview
Control cubicle heater units are used for preventing malfunctions
due to condensation water and corrosion and for controlling the
temperature inside the control cubicle (observance of a minimum temperature).
The plastic enclosure is designed such that the surface
temperatures on the touchable side areas are kept very low.
The heater units are designed for uninterrupted duty.
All units are also available in UL-approved versions and for
special voltages.
DT Article No.
Price
per PU
PU
(UNIT,
SET, M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
Heater units
Heater units, UL-approved, with PTC thermistor
110 ... 250 V AC/DC
8MR2130-1A
15W
8MR2130-1A
2 units
181
0.600
30 W
8MR2130-3A
2 units
181
0.600
45 W
8MR2130-4A
1 unit
181
0.300
60 W
8MR2130-6A
1 unit
181
0.400
75 W
8MR2130-7A
1 unit
181
0.500
100 W
8MR2130-0A
1 unit
181
0.500
150 W
8MR2130-5A
1 unit
181
0.700
50 W
8MR2131-4A
1 unit
181
0.290
100 W
8MR2131-0A
1 unit
181
0.300
150 W
8MR2131-5A
1 unit
181
0.440
50 W, 15 C
8MR2132-1A
1 unit
181
0.300
50 W, 25 C
8MR2132-1AB
1 unit
181
0.300
100 W, 15 C
8MR2132-0A
1 unit
181
0.310
100 W, 25 C
8MR2132-0AB
1 unit
181
0.310
150 W, 15 C
8MR2132-5A
1 unit
181
0.440
150 W, 25 C
8MR2132-5AB
1 unit
181
0.440
30 W
8MR2110-3BA
1 unit
181
0.134
8MR2110-1BB
1 unit
181
0.014
15 W
8MR2130-1BA
1 unit
181
0.221
30 W
8MR2130-3BA
1 unit
181
0.224
45 W
8MR2130-4BA
1 unit
181
0.220
8MR2131-4A
Semiconductor heater units with thermostat,
degree of protection IP20, compact design
120 ... 250 V AC/DC
8MR2132-1A
Small semiconductor heater unit
12 ... 30 V AC/DC
8MR2110-3BA
Semiconductor heater unit
12 ... 30 V AC/DC
8/10
Siemens LV 50 2014
Siemens AG 2014
Overview
Where higher heating outputs (from 150 W) are required, fan
heaters are used.
The integrated fans provide for better air circulation and hereby
achieve a more uniform air temperature distribution in the control
cubicle.
All units are also available in UL-approved versions and for
special voltages.
DT Article No.
Price
per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
Fan heaters
Fan heaters in standard version
UL-approved
Without fan
8MR2140-0A
8MR2140-0A
1 unit
181
0.400
8MR2140-1A
1 unit
181
0.400
8MR2140-2A
1 unit
181
0.500
8MR2140-3A
1 unit
181
0.500
8MR2140-4A
1 unit
181
0.500
8MR2140-6C
1 unit
181
0.600
8MR2140-0B
1 unit
181
0.600
8MR2140-1B
1 unit
181
0.600
8MR2140-2B
1 unit
181
0.900
8MR2140-3B
1 unit
181
0.900
8MR2140-4B
1 unit
181
0.900
8MR2140-6D
1 unit
181
1.000
8MR2122-4A
1 unit
181
1.100
8MR2122-8A
1 unit
181
1.400
8MR2122-4B
1 unit
181
1.100
8MR2122-8B
1 unit
181
1.400
- 24 V DC, 250 W
8MR2122-4AB
1 unit
181
1.100
- 48 V DC, 250 W
8MR2122-4AC
1 unit
181
1.100
- 48 V DC, 400 W
8MR2122-8AA
1 unit
181
1.262
With fan
8MR2140-0B
Compact fan heaters
With fan, UL-certified
With fan
8MR2122-4A
Siemens LV 50 2014
8/11
Siemens AG 2014
DT Article No.
Price
per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
8MR2150-0A
1 unit
181
1.400
8MR2150-0BA
1 unit
181
1.400
8MR2150-0C
1 unit
181
1.450
8MR2150-0CA
1 unit
181
1.450
8MR2150-2C
1 unit
181
0.300
8MR2150-5A
1 unit
181
0.527
8MR2140-3C
1 unit
181
1.100
8MR2150-4A
1 unit
181
0.537
8MR2140-5C
1 unit
181
1.100
8MR2150-5AA
1 unit
181
0.526
8MR2140-3D
1 unit
181
1.100
8MR2150-4AA
1 unit
181
0.536
8MR2140-5D
1 unit
181
1.100
8MR2150-2D
1 unit
181
0.300
8MR2150-5B
1 unit
181
0.530
8MR2150-4B
1 unit
181
0.540
8MR2150-5AB
1 unit
181
0.530
8MR2150-4AB
1 unit
181
0.540
8MR2150-3A
1 unit
181
1.250
8MR2150-3B
1 unit
181
1.250
8MR2151-3A
1 unit
181
1.260
8MR2151-3B
1 unit
181
1.235
8MR2150-2A
1 unit
181
1.200
8MR2150-2B
1 unit
181
1.200
8MR2151-2A
1 unit
181
1.200
8MR2151-2B
1 unit
181
1.175
8MR2150-0A
Fan heaters, UL-approved, for wall mounting
8MR2150-0C
8MR2150-5AA
8
8MR2150-5B
8MR2151-3A
(illustration similar)
PTC fan heaters for floor mounting
UL-approved, 1200 W, screw fixing (M5)
8MR2151-2A
(illustration similar)
8/12
Siemens LV 50 2014
Siemens AG 2014
Overview
humidity of 65 % in cubicles and enclosures with built-in electrical and electronic components. This prevents condensation on
structural parts and electronic components.
Hygrotherms
Hygrotherms monitor both temperature and relative humidity in
cubicles and enclosures with built-in electrical/electronic components and switch on a heater or fan upon reaching the selected values (temperature or relative humidity). This prevents
condensation on structural parts and electronic components.
Switching modules
Switching modules are electronic relays for the switching of
high-power DC devices.
Tamper-proof thermostat, NC contact
Thermostats
Thermostats (as NC, NO or CO contacts) are used to regulate
cooling devices, filter fans and heat exchangers, as well as to
trigger signals in case of excessive temperatures.
Hygrostats
Hygrostats are used to regulate heaters/fan heaters so that the
temperature increase raises the dew point from a critical
DT Article No.
Price
per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
Thermostats
Small thermostats
UL-approved, max. switching capacity 250 V AC, 10 (2 A)
NC contacts
- Temperature range 0 ... +60 C
8MR2170-2BA
1 5 units
181
0.040
8MR2170-1CA
1 5 units
181
0.150
8MR2170-1DA
1 5 units
181
0.050
8MR2170-2BB
1 5 units
181
0.040
8MR2170-1CB
1 5 units
181
0.040
8MR2170-1DB
1 5 units
181
0.040
- Temperature range 15 C / 59 F (5 C / 41 F)
8MR2171-1BA
1 5 units
181
0.023
8MR2171-2BA
1 5 units
181
0.023
8MR2171-1BB
1 5 units
181
0.023
8MR2171-2BB
1 5 units
181
0.023
8MR2171-3BB
1 5 units
181
0.023
NO contacts
8MR2170-2BA
8MR2170-2BB
Tamper-proof thermostats
UL-approved, max. switching capacity 250 V AC, 5 (1.6 A)
NC contacts
NO contacts
8MR2171-1BA
8MR2171-1BA
Siemens LV 50 2014
8/13
Siemens AG 2014
DT Article No.
Price
per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
Mechanical thermostats
UL-approved
Changeover contact +5 ... +60 C,
max. switching capacity 250 V AC, 10 (4 A)
8MR2170-1A
1 2 units
181
0.100
8MR2170-1B
1 unit
181
0.100
8MR2170-1GA
1 unit
181
0.068
8MR2170-1GB
1 unit
181
0.068
8MR2170-1GC
1 unit
181
0.068
8MR2170-2A
1 unit
181
0.080
8MR2170-1EA
1 unit
181
0.089
8MR2170-1E
1 2 units
181
0.090
8MR2172-1A
1 3 units
181
0.040
8MR2172-2A
1 3 units
181
0.040
8MR2172-1AB
1 3 units
181
0.040
8MR2170-1C
1 unit
181
0.060
230 V AC
40 ... 90 % relative air humidity
Max. switching capacity 240 V AC, 8 (1.6 A)
8MR2170-1AF
1 unit
181
0.700
120 V AC
40 ... 90 % relative air humidity
Max. switching capacity 120 V AC, 8 (1.6 A)
8MR2170-2AF
1 unit
181
0.700
230 V AC
65 % relative air humidity
Max. switching capacity 240 V AC, 8 (1.6 A)
8MR2170-1BF
1 unit
181
0.700
120 V AC
65 % relative air humidity
Max. switching capacity 120 V AC, 8 (1.6 A)
8MR2170-2BF
1 unit
181
0.700
8MR2171-1A
Electronic thermostats
8MR2170-1GA
Twin thermostats
8MR2170-1EA
Twin thermostats (tamper-proof)
8MR2172-1A
Hygrostats
Hygrostats are used to regulate heaters/fan heaters so that the
temperature increase raises the dew point
Mechanical hygrostats
UL-approved
CO contact, 230 V AC,
35 ... 95 % relative air humidity
Max. switching capacity 250 V AC, 5 (0.2 A) or 20 W AC
Min. switching capacity 20 V AC/DC, 100 mA
Electronic hygrostats
8MR2170-1AF
8MR2170-1BF
8/14
Siemens LV 50 2014
Siemens AG 2014
DT Article No.
Price
per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG
Weight
per PU
approx.
kg
Hygrotherms
Electronic hygrotherms
UL-approved, 50 ... 90% relative air humidity, for simultaneously
monitoring both temperature and relative humidity in cubicles
and enclosures with electronic components, CO contacts
8MR2170-4F
8MR2170-4F
1 unit
181
0.020
8MR2170-4E
1 unit
181
0.200
24 V DC, 16 A
8MR2180-1A
1 unit
181
0.085
48 V DC, 16 A
8MR2180-1B
1 unit
181
0.085
Switching modules
Switching modules
Electronic relay for switching high-power DC devices from
thermostats, hygrostats or hygrotherms
8MR2180-1A
More information
Further information see Industry Mall under
"Building Technologies":
"Low-Voltage Power Distribution and Electrical Installation
Technology"
--> "SIVACON Power Distribution Boards and Busbar Trunking
Systems"
--> "System Cubicles, System Lighting and
System Air-Conditioning"
--> "SIVACON 8MR System Air-Conditioning"
Siemens LV 50 2014
8/15
Siemens AG 2014
8/16
Siemens LV 50 2014
Siemens AG 2014
Appendix
9/2
Catalog notes
9/3
Ordering notes
9/6
Further documentation
9/11
Quality management
9/12
9/17
Siemens contacts
9/18
9/19
Comprehensive support
from A to Z
9/20
Software licenses
9/22
Subject index
9/24
9/36
Siemens LV 50 2014
Siemens AG 2014
Appendix
Catalog notes
Overview
Trademarks
All product designations may be registered trademarks or product names of Siemens AG or supplier companies whose use by
third parties for their own purposes may violate the rights of the
owner.
Amendments
All technical data, dimensions and weights are subject to
change without notice unless otherwise specified on the pages
of this catalog.
Dimensions
All dimensions are in mm.
Images
The illustrations are not binding.
Technical data
The technical data in the catalog are for general information. The
instruction manuals and the operating instructions on the products must be observed during assembly, operation and maintenance.
Further technical information is available at
www.siemens.com/lowvoltage/product-support
under Product List:
- Technical specifications
under Entry List:
- Certificates
- Characteristics
- Download
- FAQ
- Manuals
- Updates
Configurators can be found at
www.siemens.com/lowvoltage/configurators
Assembly, operation and maintenance
The instruction manuals and the operating instructions on the
products must be observed during assembly, operation and
maintenance.
9/2
Siemens LV 50 2014
Siemens AG 2014
Appendix
Ordering notes
Logistics
General
With regard to delivery service, communications and environmental protection, our logistics service ensures "quality from the
moment of ordering right through to delivery". By designing our
infrastructure according to customer requirements and implementing electronic order processing, we have successfully optimized our logistics processes.
We select our packaging for maximum environmental compatibility and reusability (e. g. crumpled paper instead of polystyrene chips for protection during transport in packages up to
32 kg) and, in particular, with a view to reducing waste.
With our multi-unit packaging and reusable packaging, we offer
you specific types of packaging that are both kind to the environment and tailored to your requirements:
Your advantages at a glance:
Lower order costs.
Cost savings through uniform-type packaging:
low/no disposal costs.
Reduced time and cost thanks to short unpacking times.
"Just-in-time" delivery directly to the production line helps reduce stock: cost savings through reduction of storage area.
Fast assembly thanks to supply in sets.
Standard Euro boxes - corresponding to the Euro pallet
modular system - suitable for most conveyor systems.
Active contribution to environmental protection.
Unless stated otherwise in the "Selection and ordering data" of
this catalog, our products are supplied individually packed.
For small parts/accessories, we offer you economical packaging units as standard packs containing more than one
item, e. g. 5, 10, 50 or 100 units. It is essential that whole number multiples of these quantities be ordered to ensure satisfactory quality of the products and problem-free order processing.
The products are delivered in a neutral carton. The label includes warning notices, the CE mark, the open arrow recycling
symbol, and product description information in English and
German. In addition to the Order No. (MLFB) and the number of
items in the packaging, the Instr. Order No. is also specified for
the operating instructions. It can be obtained from your local
Siemens representative (you will find a list of your local Siemens
representatives at www.siemens.com/automation/partner).
The device Order No. of most devices can also be acquired
through the EAN barcode to simplify ordering and storage logistics.
The Order Nos. and EAN codes are assigned electronically in
the master data of the products for low-voltage power distribution and electrical installation.
Siemens LV 50 2014
9/3
Siemens AG 2014
Appendix
Ordering notes
Overview
Ordering special versions
When small orders are placed, the costs associated with order
processing are greater than the order value. We therefore recommend that you combine several small orders. Where this is
not possible, we regret that we are obliged to make a small processing charge: for orders with a net goods value of less than
250 we charge an 20 supplement to cover our order processing and invoicing costs.
DT
Meaning
Preferred type
Two workdays
One week
Three weeks
Six weeks
On request
If ordered in normal quantities, the products are usually delivered within the specified delivery times,
calculated from the date we receive your order.
In exceptional cases, delivery times may vary from those specified.
The delivery times are valid ex works from Siemens AG (products ready for dispatch).
Shipping times depend on the destination and the method of shipping. The standard shipping time
for Germany is one day.
The specified delivery times are correct at the time of going to print and are subject to constant optimization. Up-to-date information can be found at www.siemens.com/industrymall.
Meaning
1 unit
5 units
For example, five units are packed in a bag. Because the bags cannot be opened, you can only order a multiple of
the quantity contained in the bag: 5, 10, 15, 20 etc.
5/100 units
One carton contains (for example) 20 bags, each containing 5 units, i.e. a total of 100 units. If only cartons are available for delivery, you need to order a multiple of the carton quantity: 100, 200, 300, etc.
Ordering a quantity of 220 units would result in the following delivery: two cartons, each containing 100 units
(= 200 units) and 4 bags, each containing 5 units (= 20 units).
1 set
Weight
The defined weight is the net weight in kg and refers to the price unit (PU).
Examples
DT Article No.
Price
PU
per PU (UNIT,
SET,
M)
PS/
P. unit
PG
1 unit
181
8MR2110-3BA
PU:
9/4
181
Siemens LV 50 2014
Siemens AG 2014
Appendix
Ordering notes
Special versions
The price list does not include prices for special sizes. For technical reasons it may not be possible to supply all sizes. If you require quotations for special sizes of our system cubicles or complex expansions, please contact us at:
Phone:
+49 (341) 4470-472
+49 (341) 4470-534
+49 (341) 4470-475
+49 (341) 4470-493
E-mail:
sicube.sivacon.ic@siemens.com
Inquiries about standard variants can also be submitted via the
Internet:
www.siemens.com/sivacon
For inquiries about special variants please have the following
information available:
Height x width x depth in mm
Degree of protection
Design of the enclosure
(e. g. front door, ventilation roof, rear panel, 2 side panels,
plinth H = 100 mm ...)
Interior installation
Further requirements
Ordering
Please send your order in writing to your Siemens
representative.
Transport and packaging
The following applies for 8MF cubicle systems within Germany:
We charge 8 % of the order value, but at least 25.--,
for transport and packaging.
Packaging and transport are free for an order value of
over 5 000.-- .
For all other products we invoice transport and packaging
charges as incurred.
Siemens LV 50 2014
9/5
Siemens AG 2014
Appendix
Further documentation
9/6
Siemens LV 50 2014
Siemens AG 2014
Appendix
Further documentation
Industry Mall
The catalog and ordering system for Siemens automation and
drive technology and low-voltage power distribution and electrical installation products. You can access this site round the
clock to find out everything you need to know about our product
portfolio and much more besides. From intelligent tools designed to simplify the configuring of products and systems to
software downloads and documentation.
By utilizing our personalized access service, you can make full
use of all the Industry Mall functions. Once you are registered,
our system provides you with a broad range of tools to help you
conduct your business with Siemens efficiently:
The Industry Mall - for online information, product selection
and ordering:
Detailed information including product data, illustrations,
certificates and dimensional drawings
Simple configuring of systems
Possibility to request individualized quotations
Availability check
Online ordering facility
Order tracking/order overview
Fast access to relevant training offers and services
You can find the Industry Mall on the Internet at
www.siemens.com/industrymall
Siemens LV 50 2014
9/7
Siemens AG 2014
Appendix
Further documentation
Industry Online
Support App
Scan in the product code, for example, and you will receive all
the product information you need. You can send your search
results conveniently by e-mail to your work place or store them
in your Favorites folder for later offline retrieval.
The Siemens Industry Online Support App is available for
Android and iOS.
9/8
Siemens LV 50 2014
Siemens AG 2014
Appendix
Further documentation
Product configurator
To help you find the right product for your application, Siemens
displays an overview of key product highlights on its web pages.
You can also call up detailed sample applications in the Siemens
Industry Online Support. Another important tool to help you
select the right components are the configurators for products
and systems.
By clicking a few options with the mouse, you will find yourself
guided by the configurator to a suitable product or system.
Simply enter the relevant parameters and select your solution.
You will be supplied with useful product data, such as 3D
models, circuit diagrams, certificates and operating instructions,
to help you plan the mechanical and electrical systems of the
configured solution. You can then export the generated product
list to Excel or place it in the shopping cart of the Siemens
Industry Mall ready for ordering.
The configurators are available online in the Siemens Industry
Mall and offline in catalog CA01. A product selection process
could hardly be made any faster or easier.
Find the right product faster using intuitive product
selection
Complete selection of products and systems based on
technical characteristics or application requirements
Simple, intuitive operation
Option to save the configuration and order lists in a file format
of your choice (txt, pdf, xls, csv)
Direct transfer of the order list into the shopping cart of the
Siemens Industry Mall
Fast access to product data for the selected product and
system configuration
Available in multiple languages for use by customers
anywhere in the world
Siemens LV 50 2014
9/9
Siemens AG 2014
Appendix
Further documentation
Dimensional
drawings
Operating
instructions
3D models
Product images
Manuals
Data sheets
Certificates
EPLAN Electric
P8 Macros
IC01_00265
www.siemens.com/lowvoltage/cax
The CAx Download Manager can supply you with all the necessary CAx file types for the products of your choice for use in all
common CAE and CAD systems. The data contained in the files
is continuously updated. The whole process involves only four
selection steps and is free of charge. All the files you select will
then be compiled into a zip file and made available for you to
download for further use.
This service will cut the time it takes you to integrate product
data into your CAE and CAD system by up to 80 %.
Siemens makes available up to 12 file types to support your
mechanical (CAD) and electrical (CAE) planning processes for
you to download at any time of the day.
Universal product data for your CAE and CAD systems
reduces data integration time by up to 80 %
No manual data collection necessary
Universal manufacturer data for all common CAE and CAD
systems
Standardized documentation is simple to generate
Choice of different languages for system commissioning
anywhere in the world
My Documentation Manager
In accordance with directives*, the documentation is part of the
plant and requires certification, thus giving the purchaser the
right to full plant documentation.
To support you in this, a manual configurator has been developed with which you can put together individual and standardcompliant documentation fully in accordance with the relevant
project-specific requirements.
You can thus select the chapters relevant to the respective product from the available manuals of the installed Siemens components. FAQs, certificates, data sheets and your own content can
also be incorporated. This means that the documentation is
perfectly tailored to your individual needs and consequently the
information is easier to locate.
9/10
Siemens LV 50 2014
Siemens AG 2014
Appendix
Quality management
Overview
The quality management system of our IC LMV LP Business Unit
complies with the international standard EN ISO 9001.
The products and systems listed in this catalog are marketed
using a VDE-approved quality management system according
to ISO 9001.
VDE certificate
Siemens AG
Infrastructure & Cities Sector
Low and Medium Voltage Division
Low Voltage & Products
Reg. No.: 40017/QM/03.06
Certificates
Information on the certificates available (CE, UL, CSA, FM,
shipping authorizations) for low-voltage power distribution and
electrical installation products can be found on the Internet at
www.siemens.com/lowvoltage/product-support.
In the Entry List you can use the certificate type (general product
approval, explosion protection, test certificates, shipbuilding,...)
as a filter criterion.
Siemens LV 50 2014
9/11
Siemens AG 2014
Appendix
Standards and approvals
Overview
Approvals, test certificates, characteristic curves
An overview of the certificates available for low-voltage power
distribution and electrical installation products along with more
technical documentation can be consulted daily on the Internet
at
www.siemens.com/lowvoltage/product-support
IEC
EN
DIN VDE
Title
60044-1
60044-1
--
60050-441
--
--
60076-11
60079-14
60079-2
60076-11
60079-14
60079-2
----
60204-1
60204-1
--
60269-1
60269-2
60269-1
60269-2
0636-1
0636-2
60269-3
60269-3
0636-3
60269-4
60269-6
60269-4
60269-6
0636-4
0636-6
60439-1
60439-3
60439-1
60439-3
---
Low-voltage switchgear and controlgear assemblies: Type-tested and partially type-tested assemblies
Low-voltage switchgear and controlgear assemblies: Particular requirements for low-voltage switchgear and
controlgear assemblies intended to be installed in places where unskilled persons have access for their use:
Distribution boards
60664-1
60664-1
--
Insulation coordination for electrical equipment in low-voltage systems: Principles, requirements and tests
60947-1
60947-2
60947-3
60947-1
60947-2
60947-3
----
60947-4-1
60947-4-2
60947-4-3
60947-4-1
60947-4-2
60947-4-3
----
60947-5-1
60947-5-2
60947-5-3
60947-5-1
60947-5-2
60947-5-3
----
60947-5-5
60947-5-6
60947-5-5
60947-5-6
---
60947-5-7
60947-5-8
60947-5-9
60947-5-7
60947-5-8
60947-5-9
----
Control circuit devices and switching elements - Electromechanical control circuit devices
Control circuitdevices and switching elements - Proximity switches
Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under
fault conditions (PDDB)
Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers
(NAMUR)
Control circuit devices and switching elements - Requirements for proximity devices with analogue output
Control circuit devices and switching elements - Three-position enabling switches
Control circuit devices and switching elements - Flow rate switches
60947-6-1
60947-6-2
60947-6-1
60947-6-2
---
60947-7-1
60947-7-2
60947-7-3
60947-7-1
60947-7-2
60947-7-3
----
60947-8
60947-8
--
Control units for built-in thermal protection (PTC) for rotating electrical machines
60999-1
60999-1
--
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type
clamping units: General requirements and particular requirements for clamping units for conductors
from 0.2 mm2 up to 35 mm2 (included)
9/12
Siemens LV 50 2014
Siemens AG 2014
Appendix
Standards and approvals
IEC
EN
DIN VDE
Title
61000-4-1
61000-6-3
61000-4-1
61000-6-3
---
61000-6-4
61000-6-4
--
Electromagnetic compatibility (EMC): Testing and measuring techniques - Overview of IEC 61000-4 series
Electromagnetic compatibility (EMC): Generic standards - Emission standard for residential, commercial and
light-industrial environments
Electromagnetic compatibility (EMC): Generic standards - Emission standard for industrial environments
61140
61140
--
Protection against electric shock - Common aspects for installation and equipment
61439-1
61439-2
61439-1
61439-2
61558-1
61558-1
0570-11)
61558-2-1
61558-2-1
0570-2-11)
61558-2-2
61558-2-4
61558-2-2
61558-2-4
0570-2-21)
0570-2-41)
61558-2-6
61558-2-6
0570-2-61)
61558-2-9
61558-2-9
0570-2-91)
Particular requirements and tests for separating transformers and power supplies incorporating separating
transformers for general applications
Particular requirements and tests for control transformers and power supplies incorporating control transformers
Particular requirements and tests for isolating transformers and power supply units incorporating isolating
transformers
Particular requirements and tests for safety isolating transformers and power supply units incorporating safety
isolating transformers
Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten
filament lamps
Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
Particular requirements and tests for variable transformers and power supply units incorporating variable
transformers
Particular requirements and tests for isolating transformers for the supply of medical locations
Particular requirements and tests for small reactors
--
--
Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to
internal fault
61810-1
61812-1
61810-1
61812-1
---
62026-2
50295
--
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs): Actuator sensor interface (AS-i)
62041
62041
0570-101)
Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements
--
50178
--
--
50274
--
Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against
unintentional direct contact with hazardous live parts
1)
VDE classification.
UL
JIS
Title
506
508
489
1012
-----
-----
-----
Specialty transformers
Industrial control equipment
Molded case circuit breakers, molded case switches and circuit breaker enclosures
Power units other than CLASS 2
1561
5085
60601-1
----
----
----
1604
-1059
-486A -486B --
----
----
486E
--
--
--
Equipment wiring terminals for use with aluminum and/or copper conductors
50
--
--
--
-----
No. 66
No. 14
No. 5
No. 107-1
-----
-----
Specialty transformers
Industrial control equipment
Molded case circuit breakers, molded case switches and circuit breaker enclosures
General use power supplies
--
--
A17.5 / B
44.1
--
--
--
--
In some cases, CSA for Canada and UL for the USA only approve special switchgear versions. Such special versions are
listed separately from the standard versions in the individual
parts of this catalog.
For this equipment, partial limitations of the maximum permissible voltages, currents and rated outputs can be imposed, or
special approval and, in some cases, special identification is
required.
For use on board ship, the specifications of the marine classification societies must be observed (see table below). In some
cases, they require type tests of the components to be approved.
Siemens LV 50 2014
9/13
Siemens AG 2014
Appendix
Standards and approvals
USA 1)
China
CSA UL
(USA)
UL
CQC
Approval symbol
Approval requirements
Remarks
c u cU
c UUS
c uUS
For guide numbers and file numbers for the approvals, visit our website at
www.siemens.com/lowvoltage/product-support
9/14
Siemens LV 50 2014
U
c UUS
c uUS
+
Siemens AG 2014
Appendix
Standards and approvals
United
Kingdom
France
Norway
CIS
Italy
Poland
USA
Name
Germanischer
Lloyd
Lloyds
Register of
Shipping
Bureau
Veritas
Det Norske
Veritas
Russian
Maritime
Register of
Shipping
Registro
Italiano
Navale
Polski
Rejestre
Statkw
American
Bureau of
Shipping
Codes
GL
LRS
BV
DNV
RMRS
RINA
PRS
ABS
CE marking
Manufacturers of products which fall within the scope of EC
directives must identify their products, operating instructions or
packaging with a CE mark.
The CE mark confirms that a product fulfills the appropriate
basic requirements of all pertinent directives. The mark is a mandatory requirement for putting products into circulation throughout the EC.
Accident prevention
Test certificates and approvals from the BIA (German statutory
industrial accident insurance institution in Bonn) and from SUVA
(Swiss institute for accident prevention) are available for some
Listed Product
Devices are identified using the "UL listing mark" on the rating plate
e.g. USA: u LISTED 165 C
Canada: cu LISTED 165 C
IND. CONT. EQ.
IND. CONT. EQ.
(165 C stands for: Siemens, I IA CD Division, Amberg plant)
If devices are u or cu approved as "listed products", they are also approved as U or cU "recognized components".
Siemens LV 50 2014
9/15
Siemens AG 2014
Appendix
Standards and approvals
Argentina
In Argentina, the approval requirements are based on Resolution
92/98. Since April 1st, 2001, circuit breakers and RCCBs require
approval.
Since April 1st, 2002, protective switches up to In = 63 A and
Umax = 440 V require approval and must bear a mark of conformity.
Romania
In Romania, components which are used in public buildings
must be approved by the Romanian testing authority ICECON.
South Africa
In South Africa there are approval requirements for circuit breakers and busbar trunking systems. Such equipment must bear a
conformity mark.
Standard
dated
IEC 62208
2002-22-01
Empty enclosures for low-voltage switchgear and controlgear assemblies General requirements
DIN EN 50298
1999-06-01
DIN 41488-1
1971-03-01
DIN 41488-2
1972-08-01
DIN 43656
1979-01-01
Indoor switchgear and controlgear assemblies and high-voltage switchgear and controlgear up to 36 kV;
colouring
DIN 43668
1964-11-01
Keys for the doors of electrical switchgear cubicles and cabinets; double-bit key
More information
You can find more information about standards and approvals at
www.siemens.com/lowvoltage/product-support
If you have any questions concerning UL/CSA approvals,
contact Technical Support. More detailed information is
available at www.siemens.com/lowvoltage/technical-support
9/16
Siemens LV 50 2014
The 8MF special cubicle racks (not the standard versions) meet
the requirements according to DIN 6700, Component Class C2
- "Rail vehicles with high safety significance".
Suitable requirements on quality, production and documentation
are agreed between the customer and the manufacturer.
Siemens AG 2014
Appendix
Siemens contacts
Siemens LV 50 2014
9/17
Siemens AG 2014
Appendix
Service & Support
The unmatched complete service
for the entire life cycle
Online support
Field Service
Our comprehensive online information platform covers every
aspect of our Service & Support
and is available whenever,
wherever.
Technical support
Spare parts
The competent consulting
service for technical issues with
a broad range of customeroriented services for all our
products and systems.
Training
9/18
Specification texts
Extend your lead with practicerelated know-how straight from
the manufacturer.
Siemens LV 50 2014
Siemens AG 2014
Appendix
Comprehensive support from A to Z
Overview
Product information
Website
Newsletter
Industry Mall
SIMARIS
configuration
planning and
configuring software
Product documentation
Service & Support
portal
My Documentation
Manager
Image database
www.siemens.com/lowvoltage/mdm
www.siemens.com/lowvoltage/picturedb
Product training
SITRAIN Portal
Product hotline
Technical Support
Siemens LV 50 2014
9/19
Siemens AG 2014
Appendix
Software licenses
Overview
Software types
Software requiring a license is categorized into types.
The following software types have been defined:
Engineering software
Runtime software
Engineering software
This includes all software products for creating (engineering)
user software, e.g. for configuring, programming, parameterizing, testing, commissioning or servicing.
Data generated with engineering software and executable
programs can be duplicated for your own use or for use by thirdparties free-of-charge.
Runtime software
This includes all software products required for plant/machine
operation, e.g. operating system, basic system, system expansions, drivers, etc.
The duplication of the runtime software and executable programs created with the runtime software for your own use or for
use by third-parties is subject to a charge.
You can find information about license fees according to use in
the ordering data (e.g. in the catalog). Examples of categories of
use include per CPU, per installation, per channel, per instance,
per axis, per control loop, per variable, etc.
Information about extended rights of use for parameterization/configuration tools supplied as integral components of the
scope of delivery can be found in the readme file supplied with
the relevant product(s).
License types
Siemens Industry Automation & Drive Technologies offers various types of software license:
Floating license
Single license
Rental license
Rental floating license
Trial license
Demo license
Demo floating license
Floating license
The software may be installed for internal use on any number of
devices by the licensee. Only the concurrent user is licensed.
The concurrent user is the person using the program. Use
begins when the software is started.
A license is required for each concurrent user.
Single license
Unlike the floating license, a single license permits only one
installation of the software per license.
The type of use licensed is specified in the ordering data and
in the Certificate of License (CoL). Types of use include for
example per instance, per axis, per channel, etc.
One single license is required for each type of use defined.
Rental license
A rental license supports the "sporadic use" of engineering
software. Once the license key has been installed, the software
can be used for a specific period of time (the operating hours do
not have to be consecutive).
One license is required for each installation of the software.
9/20
Siemens LV 50 2014
Siemens AG 2014
Appendix
Software licenses
Overview
ServicePack
ServicePacks are used to debug existing products.
ServicePacks may be duplicated for use as prescribed according to the number of existing original licenses.
License key
Siemens Industry Automation & Drive Technologies supplies
software products with and without license keys.
The license key serves as an electronic license stamp and
is also the "switch" for activating the software (floating license,
rental license, etc.).
The complete installation of software products requiring license
keys includes the program to be licensed (the software) and the
license key (which represents the license).
Siemens LV 50 2014
9/21
Siemens AG 2014
Appendix
Subject index
Numerics
A
Actuator pins .............................................................................................3/15
Air conditioners/cooling devices
Cooling devices for door or side mounting ............................................8/8
Cooling devices for roof mounting .........................................................8/8
Air-conditioning ...........................................................................................8/2
App
Siemens Industry Online Support App ...................................................9/8
Approvals ......................................................................................9/12 ... 9/16
AVE
Project ....................................................................................................6/4
B
Base parts ...................................................................................................4/2
Base plates .................................................................................................4/2
Brackets for center fixing of a mounting panel ...........................................4/8
C
9/22
Siemens LV 50 2014
E
Earthquake-resistant version .................................................................... 5/12
Electromagnetic compatibility (EMC) ......................................................... 5/9
Electronic hygrostats ................................................................................ 8/14
Electronic hygrotherms ............................................................................. 8/15
Electronic thermostats .............................................................................. 8/14
EMC ............................................................................................................ 5/9
EMC filter fans ............................................................................................ 8/5
Enclosure parts, customizing ..................................................................... 3/3
Espagnolette lock accessory sets ............................................................ 3/15
Exteriors ...................................................................................................... 4/2
F
Fan heaters ............................................................................................... 8/11
Fastening plates ....................................................................................... 4/15
Feet ............................................................................................................. 4/2
Filter fans .................................................................................................... 8/5
19" withdrawable fan unit ....................................................................... 8/7
Filter mats ............................................................................................... 8/7
Outlet filters ............................................................................................ 8/6
Roof filter fans ........................................................................................ 8/7
Versions .................................................................................................. 8/5
Fixing kits for circuit breakers ................................................................... 4/10
Foam rubber profile ......................................................................... 3/10, 3/11
G
Grounding ................................................................................................. 4/16
Guide to configuration ................................................................................ 8/4
H
Handles .................................................................................................... 3/15
Heat exchangers
Air/air heat exchangers .......................................................................... 8/9
Cubicles with .......................................................................................... 6/5
Heater plate .............................................................................................. 4/15
Heavy-duty swing frames ......................................................................... 4/13
Hygrostats ................................................................................................ 8/13
Hygrotherms ............................................................................................. 8/13
I
Industry Mall ............................................................................................... 9/7
Industry Online Support ............................................................................. 9/8
Information and download center .............................................................. 9/6
Installation notes for EMC-compliant configuration .................................. 5/11
Installation plates ........................................................................................ 4/8
Integrated lights
For 8MC, 8MF ........................................................................................ 7/4
Integrated lights 8MF ................................................................................. 7/2
Interference emission and interference immunity .................................... 5/11
Interiors ....................................................................................................... 4/4
Siemens AG 2014
Appendix
Subject index
J
Joining sheets/mounting brackets ..............................................................4/5
K
Keys ..........................................................................................................3/15
L
O
Order designation 8MF5, 8MF6 .............................................................5/10
Order designations of the standard versions 8MF2 .................................5/2
Order designations of the standard versions 8MF2, 8MF5/6 ...................5/4
V
Ventilated cubicles ..................................................................................... 5/2
Ventilation 8MF, with "Masterdrive" perforation ........................................... 3/4
Ventilation cross-sections in roof plate 8MF2 .......................................... 5/3
Ventilation cross-sections in the doors 8MF2 .......................................... 5/3
Ventilation gills (SBL) .................................................................................. 3/4
Ventilation slots, 8MF .................................................................................. 3/4
Vertical profile bars ..................................................................................... 4/6
W
Welding standard SGK 2.2 ......................................................................... 6/3
R
Roof filter fans .............................................................................................8/7
S
Scope of delivery 8MF2 ...........................................................................5/2
Scope of delivery 8MF2, 8MF5/6 .............................................................5/4
Screwing together of two cubicles .............................................................2/8
Sealing strip ..............................................................................................4/17
Semiconductor heater units
With thermostat .....................................................................................8/10
Without thermostat ................................................................................8/10
Separation panel .........................................................................................4/4
Serrated bar ................................................................................................4/7
Serrated bars ..............................................................................................4/7
Shelves .......................................................................................................4/4
Side mounting plates ................................................................................4/10
Side panels .................................................................................................3/9
Siemens LV 50 2014
9/23
Siemens AG 2014
Appendix
Article number index
incl. export markings
Overview
Article No.
Page
Export markings
ECCN
8MC
8MC4300
3/16
8ME
Page
Export markings
ECCN
AL
8MF2084-4E
2/4
8MF2084-4R
2/4
8MF2084-5E
5/6
8ME1461
4/5
8MF2084-5R
5/6
8ME1462
4/5
8MF2086-4E
2/4
8ME1463
4/5
8MF2086-4R
2/4
8ME1464
4/5
8MF2086-5E
5/6
8ME1465
4/5
8MF2086-5R
5/6
8ME1466
4/5
8MF2088-4E
2/4
8ME1467
4/5
8MF2088-4R
2/4
8ME1468
4/5
8MF2088-5E
5/6
8ME1470
4/5
8MF2088-5R
5/6
8ME1471
4/5
8MF2094-4E
2/4
8ME1472
4/5
8MF2094-4R
2/4
8ME8468
3/15
8MF2094-5E
5/6
8ME8473
3/15
8MF2094-5R
5/6
8ME8811
4/5
8MF2096-4E
2/4
8ME8812
4/5
8MF2096-4R
2/4
8ME8813
4/5
8MF2096-5E
5/6
8MF2096-5R
5/6
8MF
Article No.
AL
8MF2004-4E
2/4
8MF2098-4E
2/4
8MF2004-4R
2/4
8MF2098-4R
2/4
8MF2004-5E
5/6
8MF2098-5E
5/6
8MF2004-5R
5/6
8MF2098-5R
5/6
8MF2006-4E
2/4
8MF2204-4E
2/4
8MF2006-4R
2/4
8MF2204-4R
2/4
8MF2006-5E
5/6
8MF2204-5E
5/6
8MF2006-5R
5/6
8MF2204-5R
5/6
8MF2008-4E
2/4
8MF2206-4E
2/4
8MF2008-4R
2/4
8MF2206-4R
2/4
8MF2008-5E
5/6
8MF2206-5E
5/6
8MF2008-5R
5/6
8MF2206-5R
5/6
8MF2024-4E
2/4
8MF2208-4E
2/4
8MF2024-4R
2/4
8MF2208-4R
2/4
8MF2024-5E
5/6
8MF2208-5E
5/6
8MF2024-5R
5/6
8MF2208-5R
5/6
8MF2026-4E
2/4
8MF2224-4E
2/4
8MF2026-4R
2/4
8MF2224-4R
2/4
8MF2026-5E
5/6
8MF2224-5E
5/6
8MF2026-5R
5/6
8MF2224-5R
5/6
8MF2028-4E
2/4
8MF2226-4E
2/4
8MF2028-4R
2/4
8MF2226-4R
2/4
8MF2028-5E
5/6
8MF2226-5E
5/6
8MF2028-5R
5/6
8MF2226-5R
5/6
8MF2064-4E
2/4
8MF2228-4E
2/4
8MF2064-4R
2/4
8MF2228-4R
2/4
8MF2064-5E
5/6
8MF2228-5E
5/6
8MF2064-5R
5/6
8MF2228-5R
5/6
8MF2066-4E
2/4
8MF2264-4E
2/4
8MF2066-4R
2/4
8MF2264-4R
2/4
8MF2066-5E
5/6
8MF2264-5E
5/6
8MF2066-5R
5/6
8MF2264-5R
5/6
8MF2068-4E
2/4
8MF2266-4E
2/4
8MF2068-4R
2/4
8MF2266-4R
2/4
8MF2068-5E
5/6
8MF2266-5E
5/6
8MF2068-5R
5/6
8MF2266-5R
5/6
9/24
Siemens LV 50 2014
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
ECCN
AL
Article No.
Page
Export markings
ECCN
AL
8MF2268-4E
2/4
8MF2866-4R
2/4
8MF2268-4R
2/4
8MF2866-5E
5/6
8MF2268-5E
5/6
8MF2866-5R
5/6
8MF2268-5R
5/6
8MF2868-4E
2/4
8MF2284-4E
2/4
8MF2868-4R
2/4
8MF2284-4R
2/4
8MF2868-5E
5/6
8MF2284-5E
5/6
8MF2868-5R
5/6
8MF2284-5R
5/6
8MF2884-4E
2/4
8MF2286-4E
2/4
8MF2884-4R
2/4
8MF2286-4R
2/4
8MF2884-5E
5/6
8MF2286-5E
5/6
8MF2884-5R
5/6
8MF2286-5R
5/6
8MF2886-4E
2/4
8MF2288-4E
2/4
8MF2886-4R
2/4
8MF2288-4R
2/4
8MF2886-5E
5/6
8MF2288-5E
5/6
8MF2886-5R
5/6
8MF2288-5R
5/6
8MF2888-4E
2/4
8MF2294-4E
2/4
8MF2888-4R
2/4
8MF2294-4R
2/4
8MF2888-5E
5/6
8MF2294-5E
5/6
8MF2888-5R
5/6
8MF2294-5R
5/6
8MF2894-4E
2/4
8MF2296-4E
2/4
8MF2894-4R
2/4
8MF2296-4R
2/4
8MF2894-5E
5/6
8MF2296-5E
5/6
8MF2894-5R
5/6
8MF2296-5R
5/6
8MF2896-4E
2/4
8MF2298-4E
2/4
8MF2896-4R
2/4
8MF2298-4R
2/4
8MF2896-5E
5/6
8MF2298-5E
5/6
8MF2896-5R
5/6
8MF2298-5R
5/6
8MF2898-4E
2/4
8MF2804-4E
2/4
8MF2898-4R
2/4
8MF2804-4R
2/4
8MF2898-5E
5/6
8MF2804-5E
5/6
8MF2898-5R
5/6
8MF2804-5R
5/6
8MF3040
3/5
8MF2806-4E
2/4
8MF3041
3/5
8MF2806-4R
2/4
8MF3042
3/5
8MF2806-5E
5/6
8MF3043
3/5
8MF2806-5R
5/6
8MF3044
3/5
8MF2808-4E
2/4
8MF3045
3/5
8MF2808-4R
2/4
8MF3046
3/5
8MF2808-5E
5/6
8MF3047
3/5
8MF2808-5R
5/6
8MF3048
3/5
8MF2824-4E
2/4
8MF3050
3/5
8MF2824-4R
2/4
8MF3051
3/5
8MF2824-5E
5/6
8MF3052
3/5
8MF2824-5R
5/6
8MF3053
3/5
8MF2826-4E
2/4
8MF3054
3/5
8MF2826-4R
2/4
8MF3055
3/5
8MF2826-5E
5/6
8MF3056
3/5
8MF2826-5R
5/6
8MF3057
3/5
8MF2828-4E
2/4
8MF3058
3/5
8MF2828-4R
2/4
8MF3100
3/15
8MF2828-5E
5/6
8MF3101
3/15
8MF2828-5R
5/6
8MF3102
3/15
8MF2864-4E
2/4
8MF3103
3/15
8MF2864-4R
2/4
8MF3104
3/15
8MF2864-5E
5/6
8MF3105
3/15
8MF2864-5R
5/6
8MF3110
3/15
8MF2866-4E
2/4
8MF3111
3/15
Siemens LV 50 2014
9/25
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
Page
Export markings
ECCN
AL
3/15
8MF3246
3/7
8MF3113
3/15
8MF3247
3/7
8MF3114
3/15
8MF3248
3/7
8MF3121
3/5
8MF3250
3/7
8MF3122
3/5
8MF3251
3/7
8MF3123
3/5
8MF3252
3/7
8MF3124
3/5
8MF3253
3/8
8MF3125
3/5
8MF3254
3/8
8MF3126
3/5
8MF3255
3/8
8MF3127
3/5
8MF3256
3/8
8MF3128
3/5
8MF3257
3/8
8MF3130
3/5
8MF3258
3/8
8MF3131
3/5
8MF3321
3/8
8MF3132
3/5
8MF3322
3/8
8MF3133
3/5
8MF3323
3/8
8MF3134
3/5
8MF3324
3/8
8MF3135
3/5
8MF3325
3/8
8MF3136
3/5
8MF3326
3/8
8MF3137
3/5
8MF3327
3/8
8MF3138
3/5
8MF3328
3/8
8MF3140
3/5
8MF3330
3/8
8MF3200
3/7
8MF3331
3/8
8MF3201
3/7
8MF3332
3/8
8MF3202
3/7
8MF3333
3/8
8MF3203
3/7
8MF3334
3/8
8MF3204
3/7
8MF3335
3/8
8MF3206
3/7
8MF3336
3/8
8MF3207
3/7
8MF3337
3/8
8MF3208
3/7
8MF3338
3/8
8MF3210
3/7
8MF3340
3/8
8MF3211
3/7
8MF3400
3/13
8MF3212
3/7
8MF3401
3/13
8MF3213
3/7
8MF3402
3/13
8MF3214
3/7
8MF3405
3/13
8MF3215
3/7
8MF3406
3/13
8MF3216
3/7
8MF3407
3/13
8MF3220
3/7
8MF3410
3/13
8MF3221
3/7
8MF3411
3/13
8MF3222
3/7
8MF3412
3/13
8MF3223
3/7
8MF3413
3/13
8MF3224
3/7
8MF3414
3/13
8MF3226
3/7
8MF3415
3/13
8MF3227
3/7
8MF3416
3/13
8MF3228
3/7
8MF3417
3/13
8MF3230
3/7
8MF3418
3/13
8MF3231
3/7
8MF3420
3/13
8MF3232
3/7
8MF3421
3/13
8MF3233
3/7
8MF3422
3/13
8MF3234
3/7
8MF3425
3/13
8MF3235
3/7
8MF3426
3/13
8MF3236
3/7
8MF3427
3/13
8MF3240
3/7
8MF3430
3/13
8MF3241
3/7
8MF3431
3/13
8MF3242
3/7
8MF3432
3/13
8MF3243
3/7
8MF3433
3/13
8MF3244
3/7
8MF3434
3/13
8MF3245
3/7
8MF3435
3/13
Siemens LV 50 2014
AL
Article No.
8MF3112
9/26
ECCN
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
ECCN
AL
Article No.
Page
Export markings
ECCN
AL
8MF3436
3/13
8MF3521
3/12
8MF3437
3/13
8MF3522
3/12
8MF3438
3/13
8MF3527
3/12
8MF3440
3/14
8MF3528
3/12
8MF3441
3/14
8MF4010
4/2
8MF3442
3/14
8MF4011
4/2
8MF3445
3/14
8MF4012
4/2
8MF3446
3/14
8MF4015
4/2
8MF3447
3/14
8MF4016
4/2
8MF3450
3/14
8MF4017
4/2
8MF3451
3/14
8MF4020
4/2
8MF3452
3/14
8MF4021
4/2
8MF3453
3/14
8MF4022
4/2
8MF3454
3/14
8MF4023
4/2
8MF3455
3/14
8MF4024
4/2
8MF3456
3/14
8MF4025
4/2
8MF3457
3/14
8MF4026
4/2
8MF3458
3/14
8MF4027
4/2
8MF3460
3/14
8MF4028
4/2
8MF3461
3/14
8MF4030
4/2
8MF3462
3/14
8MF4031
4/2
8MF3465
3/14
8MF4032
4/2
8MF3466
3/14
8MF4035
4/2
8MF3467
3/14
8MF4036
4/2
8MF3470
3/14
8MF4037
4/2
8MF3471
3/14
8MF4040
4/2
8MF3472
3/14
8MF4041
4/2
8MF3473
3/14
8MF4042
4/2
8MF3474
3/14
8MF4043
4/2
8MF3475
3/14
8MF4044
4/2
8MF3476
3/14
8MF4045
4/2
8MF3477
3/14
8MF4046
4/2
8MF3478
3/14
8MF4047
4/2
8MF3480
3/11
8MF4048
4/2
8MF3481
3/11
8MF4050
4/2
8MF3482
3/11
8MF4060
3/10
8MF3485
3/11
8MF4061
3/10
8MF3486
3/11
8MF4062
3/10
8MF3487
3/11
8MF4065
3/10
8MF3490
3/11
8MF4066
3/10
8MF3491
3/11
8MF4067
3/10
8MF3492
3/11
8MF4070
3/10
8MF3493
3/11
8MF4071
3/10
8MF3494
3/11
8MF4072
3/10
8MF3495
3/11
8MF4073
3/10
8MF3496
3/11
8MF4074
3/10
8MF3497
3/11
8MF4075
3/10
8MF3498
3/11
8MF4076
3/10
8MF3500
3/10, 3/11
8MF4077
3/10
8MF3510
3/12
8MF4078
3/10
8MF3511
3/12
8MF4080
3/10
8MF3513
3/12
8MF4081
3/10
8MF3514
3/12
8MF4082
3/10
8MF3516
3/12
8MF4085
3/10
8MF3517
3/12
8MF4086
3/10
8MF3518
3/12
8MF4087
3/10
8MF3520
3/12
8MF4090
3/10
Siemens LV 50 2014
9/27
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
ECCN
AL
Article No.
Page
Export markings
ECCN
AL
8MF4091
3/10
8MF4321
4/11
8MF4092
3/10
8MF4322
4/11
8MF4093
3/10
8MF4380
4/6
8MF4094
3/10
8MF4381
4/6
8MF4095
3/10
8MF4382
4/6
8MF4096
3/10
8MF4400
4/6
8MF4097
3/10
8MF4401
4/6
8MF4098
3/10
8MF4402
4/6
8MF4101
3/10
8MF4403
4/6
8MF4102
3/10
8MF4404
4/6
8MF4106
3/10
8MF4405
4/6
8MF4107
3/10
8MF4406
4/6
8MF4111
3/10
8MF4407
4/6
8MF4112
3/10
8MF4410
4/6
8MF4114
3/10
8MF4411
4/6
8MF4115
3/10
8MF4412
4/6
8MF4117
3/10
8MF4413
4/6
8MF4118
3/10
8MF4414
4/6
8MF4120
3/9
8MF4415
4/6
8MF4121
3/9
8MF4416
4/6
8MF4122
3/9
8MF4417
4/6
8MF4125
3/9
8MF4420
4/6
8MF4126
3/9
8MF4421
4/6
8MF4127
3/9
8MF4422
4/6
8MF4130
3/9
8MF4423
4/6
8MF4131
3/9
8MF4424
4/6
8MF4132
3/9
8MF4425
4/6
8MF4135
3/9
8MF4426
4/6
8MF4136
3/9
8MF4427
4/6
8MF4137
3/9
8MF4500
4/8
8MF4140
3/9
8MF4501
4/8
8MF4141
3/9
8MF4502
4/8
8MF4142
3/9
8MF4503
4/8
8MF4145
3/9
8MF4504
4/8
8MF4146
3/9
8MF4510
4/8
8MF4147
3/9
8MF4511
4/8
8MF4150
4/4
8MF4512
4/8
8MF4151
4/4
8MF4513
4/8
8MF4152
4/4
8MF4514
4/8
8MF4160
4/4
8MF4520
4/8
8MF4161
4/4
8MF4521
4/8
8MF4162
4/4
8MF4522
4/8
8MF4170
4/4
8MF4523
4/8
8MF4171
4/4
8MF4524
4/8
8MF4172
4/4
8MF4530
4/8
8MF4220
4/3
8MF4550
4/10
8MF4221
4/3
8MF4551
4/10
8MF4222
4/3
8MF4552
4/10
8MF4225
4/3
8MF4555
4/10
8MF4226
4/3
8MF4556
4/10
8MF4301
4/17
8MF4557
4/10
8MF4302
4/17
8MF4560
4/10
8MF4303
4/17
8MF4561
4/10
8MF4304
4/17
8MF4562
4/10
8MF4310
8MF4570
4/11
8MF4311
8MF4600
4/9
8MF4320
4/11
8MF4601
4/9
9/28
Siemens LV 50 2014
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
ECCN
AL
Article No.
Page
Export markings
ECCN
AL
8MF4602
4/9
8MF4806
4/4
8MF4603
4/9
8MF4807
4/4
8MF4604
4/9
8MF4810
4/4
8MF4610
4/9
8MF4811
4/4
8MF4611
4/9
8MF4812
4/4
8MF4612
4/9
8MF4815
4/4
8MF4613
4/9
8MF4816
4/4
8MF4614
4/9
8MF4817
4/4
8MF4620
4/9
8MF4820
4/12
8MF4621
4/9
8MF4821
4/12
8MF4622
4/9
8MF4822
4/12
8MF4623
4/9
8MF4823
4/13
8MF4624
4/9
8MF4824
4/13
8MF4630
4/9
8MF4825
4/13
8MF4631
4/9
8MF4826
4/14
8MF4632
4/9
8MF4827
4/14
8MF4633
4/9
8MF4828
4/14
8MF4634
4/9
8MF4831
4/14
8MF4640
4/9
8MF4832
4/14
8MF4641
4/9
8MF4833
4/14
8MF4642
4/9
8MF4834
4/14
8MF4643
4/9
8MF4835
4/14
8MF4644
4/9
8MF4836
4/14
8MF4660
4/9
8MF4837
4/14
8MF4661
4/9
8MF4838
4/14
8MF4662
4/9
8MF4840
4/4
8MF4663
4/9
8MF4841
4/4
8MF4664
4/9
8MF4842
4/4
8MF4670
4/9
8MF4845
4/4
8MF4671
4/9
8MF4846
4/4
8MF4672
4/9
8MF4847
4/4
8MF4673
4/9
8MF4850
4/4
8MF4674
4/9
8MF4851
4/4
8MF4680
4/9
8MF4852
4/4
8MF4681
4/9
8MF4855
4/4
8MF4682
4/9
8MF4856
4/4
8MF4683
4/9
8MF4857
4/4
8MF4684
4/9
8MF4860
4/5
8MF4700
4/10
8MF4861
4/5
8MF4701
4/10
8MF4870
4/12
8MF4702
4/10
8MF4871
4/12
8MF4703
4/10
8MF4872
4/12
8MF4704
4/10
8MF4880
4/12
8MF4710
4/10
8MF4881
4/12
8MF4711
4/10
8MF4882
4/12
8MF4712
4/10
8MF4883
4/12
8MF4713
4/10
8MF4885
4/13
8MF4714
4/10
8MF4886
4/12
8MF4720
4/10
8MF4887
4/12
8MF4721
4/10
8MF4888
4/12
8MF4722
4/10
8MF4890
4/15
8MF4723
4/10
8MF4891
4/15
8MF4724
4/10
8MF4892
4/15
8MF4800
4/4
8MF4893
4/15
8MF4801
4/4
8MF4894
4/12
8MF4802
4/4
8MF4895
4/12
8MF4805
4/4
8MF4896
4/12
Siemens LV 50 2014
9/29
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
Page
Export markings
ECCN
AL
4/12
8MF5068-4E
2/6
8MF4898
4/12
8MF5068-4ES
5/10
8MF4900
7/2
8MF5068-4R
2/6
8MF4900-1A
7/2
8MF5068-5E
5/7
8MF4900-1B
7/2
8MF5068-5R
5/7
8MF4900-1BB
7/2
8MF5084-4E
2/6
8MF4901
7/2
8MF5084-4ES
5/10
8MF4902
7/2
8MF5084-4R
2/6
8MF4903
7/3
8MF5084-5E
5/7
8MF4904
7/2
8MF5084-5R
5/7
8MF4905
7/2
8MF5086-4E
2/6
8MF4906
7/2
8MF5086-4ES
5/10
8MF4908
7/2
8MF5086-4R
2/6
8MF4910
4/16
8MF5086-5E
5/7
8MF4911
4/16
8MF5086-5R
5/7
8MF4912
4/16
8MF5088-4E
2/6
8MF4913
4/16
8MF5088-4R
2/6
8MF4914
4/16
8MF5088-5E
5/7
8MF4915
4/16
8MF5088-5R
5/7
8MF4916
4/16
8MF5094-4E
2/6
8MF4922
4/7
8MF5094-4ES
5/10
8MF4923
4/7
8MF5094-4R
2/6
8MF4924
4/7
8MF5094-5E
5/7
8MF4925
4/7
8MF5094-5R
5/7
8MF4926
4/7
8MF5096-4E
2/6
8MF4932
4/7
8MF5096-4ES
5/10
8MF4933
4/7
8MF5096-4R
2/6
8MF4934
4/7
8MF5096-5E
5/7
8MF4935
4/7
8MF5096-5R
5/7
8MF4936
4/7
8MF5098-4E
2/6
8MF4942
4/16
8MF5098-4R
2/6
8MF4943
4/16
8MF5098-5E
5/7
8MF4944
4/16
8MF5098-5R
5/7
8MF4945
4/16
8MF5224-4E
2/6
8MF4946
4/16
8MF5224-4R
2/6
8MF5024-4E
2/6
8MF5224-5E
5/7
8MF5024-4R
2/6
8MF5224-5R
5/7
8MF5024-5E
5/7
8MF5226-4E
2/6
8MF5024-5R
5/7
8MF5226-4R
2/6
8MF5026-4E
2/6
8MF5226-5E
5/7
8MF5026-4R
2/6
8MF5226-5R
5/7
8MF5026-5E
5/7
8MF5228-4E
2/6
8MF5026-5R
5/7
8MF5228-4R
2/6
8MF5028-4E
2/6
8MF5228-5E
5/7
8MF5028-4R
2/6
8MF5228-5R
5/7
8MF5028-5E
5/7
8MF5264-4E
2/6
8MF5028-5R
5/7
8MF5264-4ES
5/10
8MF5064-4E
2/6
8MF5264-4R
2/6
8MF5064-4ES
5/10
8MF5264-5E
5/7
8MF5064-4R
2/6
8MF5264-5R
5/7
8MF5064-5E
5/7
8MF5266-4E
2/6
8MF5064-5R
5/7
8MF5266-4ES
5/10
8MF5066-4E
2/6
8MF5266-4R
2/6
8MF5066-4ES
5/10
8MF5266-5E
5/7
8MF5066-4R
2/6
8MF5266-5R
5/7
8MF5066-5E
5/7
8MF5268-4E
2/6
8MF5066-5R
5/7
8MF5268-4ES
5/10
Siemens LV 50 2014
AL
Article No.
8MF4897
9/30
ECCN
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
ECCN
AL
Article No.
Page
Export markings
ECCN
AL
8MF5268-4R
2/6
8MF5868-5R
5/7
8MF5268-5E
5/7
8MF5884-4E
2/6
8MF5268-5R
5/7
8MF5884-4ES
5/10
8MF5284-4E
2/6
8MF5884-4R
2/6
8MF5284-4ES
5/10
8MF5884-5E
5/7
8MF5284-4R
2/6
8MF5884-5R
5/7
8MF5284-5E
5/7
8MF5886-4E
2/6
8MF5284-5R
5/7
8MF5886-4ES
5/10
8MF5286-4E
2/6
8MF5886-4R
2/6
8MF5286-4ES
5/10
8MF5886-5E
5/7
8MF5286-4R
2/6
8MF5886-5R
5/7
8MF5286-5E
5/7
8MF5888-4E
2/6
8MF5286-5R
5/7
8MF5888-4R
2/6
8MF5288-4E
2/6
8MF5888-5E
5/7
8MF5288-4R
2/6
8MF5888-5R
5/7
8MF5288-5E
5/7
8MF5894-4E
2/6
8MF5288-5R
5/7
8MF5894-4ES
5/10
8MF5294-4E
2/6
8MF5894-4R
2/6
8MF5294-4ES
5/10
8MF5894-5E
5/7
8MF5294-4R
2/6
8MF5894-5R
5/7
8MF5294-5E
5/7
8MF5896-4E
2/6
8MF5294-5R
5/7
8MF5896-4ES
5/10
8MF5296-4E
2/6
8MF5896-4R
2/6
8MF5296-4ES
5/10
8MF5896-5E
5/7
8MF5296-4R
2/6
8MF5896-5R
5/7
8MF5296-5E
5/7
8MF5898-4E
2/6
8MF5296-5R
5/7
8MF5898-4R
2/6
8MF5298-4E
2/6
8MF5898-5E
5/7
8MF5298-4R
2/6
8MF5898-5R
5/7
8MF5298-5E
5/7
8MF5900
7/3
8MF5298-5R
5/7
8MF5900-1A
7/3
8MF5824-4E
2/6
8MF5900-1B
7/3
8MF5824-4R
2/6
8MF5900-1C
7/3
8MF5824-5E
5/7
8MF5900-2A
7/3
8MF5824-5R
5/7
8MF5900-2B
7/3
8MF5826-4E
2/6
8MF5900-3A
7/3
8MF5826-4R
2/6
8MF5900-3B
7/3
8MF5826-5E
5/7
8MF5910
7/3
8MF5826-5R
5/7
8MF5910-1A
7/3
8MF5828-4E
2/6
8MF5910-1B
7/3
8MF5828-4R
2/6
8MF5910-1C
7/3
8MF5828-5E
5/7
8MF5910-2A
7/3
8MF5828-5R
5/7
8MF5910-2B
7/3
8MF5864-4E
2/6
8MF5910-3A
7/3
8MF5864-4ES
5/10
8MF5910-3B
7/3
8MF5864-4R
2/6
8MF6024-4E
2/7
8MF5864-5E
5/7
8MF6024-4R
2/7
8MF5864-5R
5/7
8MF6024-5E
5/8
8MF5866-4E
2/6
8MF6024-5R
5/8
8MF5866-4ES
5/10
8MF6026-4E
2/7
8MF5866-4R
2/6
8MF6026-4R
2/7
8MF5866-5E
5/7
8MF6026-5E
5/8
8MF5866-5R
5/7
8MF6026-5R
5/8
8MF5868-4E
2/6
8MF6028-4E
2/7
8MF5868-4ES
5/10
8MF6028-4R
2/7
8MF5868-4R
2/6
8MF6028-5E
5/8
8MF5868-5E
5/7
8MF6028-5R
5/8
Siemens LV 50 2014
9/31
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
Page
Export markings
ECCN
AL
2/7
8MF6264-4R
2/7
8MF6064-4ES
5/10
8MF6264-5E
5/8
8MF6064-4R
2/7
8MF6264-5R
5/8
8MF6064-5E
5/8
8MF6266-4E
2/7
8MF6064-5R
5/8
8MF6266-4ES
5/10
8MF6066-4E
2/7
8MF6266-4KE
5/13
8MF6066-4ES
5/10
8MF6266-4R
2/7
8MF6066-4R
2/7
8MF6266-5E
5/8
8MF6066-5E
5/8
8MF6266-5KE
5/13
8MF6066-5R
5/8
8MF6266-5R
5/8
8MF6068-4E
2/7
8MF6268-4E
2/7
8MF6068-4ES
5/10
8MF6268-4ES
5/10
8MF6068-4R
2/7
8MF6268-4R
2/7
8MF6068-5E
5/8
8MF6268-5E
5/8
8MF6068-5R
5/8
8MF6268-5R
5/8
8MF6084-4E
2/7
8MF6284-4E
2/7
8MF6084-4ES
5/10
8MF6284-4ES
5/10
8MF6084-4R
2/7
8MF6284-4R
2/7
8MF6084-5E
5/8
8MF6284-5E
5/8
8MF6084-5R
5/8
8MF6284-5R
5/8
8MF6086-4E
2/7
8MF6286-4E
2/7
8MF6086-4ES
5/10
8MF6286-4ES
5/10
8MF6086-4R
2/7
8MF6286-4R
2/7
8MF6086-5E
5/8
8MF6286-5E
5/8
8MF6086-5R
5/8
8MF6286-5R
5/8
8MF6088-4E
2/7
8MF6288-4E
2/7
8MF6088-4R
2/7
8MF6288-4R
2/7
8MF6088-5E
5/8
8MF6288-5E
5/8
8MF6088-5R
5/8
8MF6288-5R
5/8
8MF6094-4E
2/7
8MF6294-4E
2/7
8MF6094-4ES
5/10
8MF6294-4ES
5/10
8MF6094-4R
2/7
8MF6294-4R
2/7
8MF6094-5E
5/8
8MF6294-5E
5/8
8MF6094-5R
5/8
8MF6294-5R
5/8
8MF6096-4E
2/7
8MF6296-4E
2/7
8MF6096-4ES
5/10
8MF6296-4ES
5/10
8MF6096-4R
2/7
8MF6296-4KE
5/13
8MF6096-5E
5/8
8MF6296-4R
2/7
8MF6096-5R
5/8
8MF6296-5E
5/8
8MF6098-4E
2/7
8MF6296-5KE
5/13
8MF6098-4R
2/7
8MF6296-5R
5/8
8MF6098-5E
5/8
8MF6298-4E
2/7
8MF6098-5R
5/8
8MF6298-4R
2/7
8MF6224-4E
2/7
8MF6298-5E
5/8
8MF6224-4R
2/7
8MF6298-5R
5/8
8MF6224-5E
5/8
8MF6824-4E
2/7
8MF6224-5R
5/8
8MF6824-4R
2/7
8MF6226-4E
2/7
8MF6824-5E
5/8
8MF6226-4R
2/7
8MF6824-5R
5/8
8MF6226-5E
5/8
8MF6826-4E
2/7
8MF6226-5R
5/8
8MF6826-4R
2/7
8MF6228-4E
2/7
8MF6826-5E
5/8
8MF6228-4R
2/7
8MF6826-5R
5/8
8MF6228-5E
5/8
8MF6828-4E
2/7
8MF6228-5R
5/8
8MF6828-4R
2/7
8MF6264-4E
2/7
8MF6828-5E
5/8
8MF6264-4ES
5/10
8MF6828-5R
5/8
Siemens LV 50 2014
AL
Article No.
8MF6064-4E
9/32
ECCN
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
ECCN
AL
Article No.
Page
Export markings
ECCN
AL
8MF6864-4E
2/7
8MF9070
3/15
8MF6864-4ES
5/10
8MF9071
3/15
8MF6864-4R
2/7
8MF9072
3/15
8MF6864-5E
5/8
8MF9073
3/15
8MF6864-5R
5/8
8MF9074
3/15
8MF6866-4E
2/7
8MF9081
3/15
8MF6866-4ES
5/10
8MF9082
3/15
8MF6866-4R
2/7
8MF9083
3/15
8MF6866-5E
5/8
8MF9100
2/8
8MF6866-5R
5/8
8MF9101
2/8
8MF6868-4E
2/7
8MF9113
2/8
8MF6868-4ES
5/10
8MF9115
2/8
9I999
8MF6868-4R
2/7
8MR
8MF6868-5E
5/8
8MR2012-0KL25
7/2
8MF6868-5R
5/8
8MR2023-0KL25
7/2
8MF6884-4E
2/7
8MR2110-1BB
8/10
8MF6884-4ES
5/10
8MR2110-3BA
8/10
8MF6884-4R
2/7
8MR2122-4A
8/11
8MF6884-5E
5/8
8MR2122-4AB
8/11
8MF6884-5R
5/8
8MR2122-4AC
8/11
8MF6886-4E
2/7
8MR2122-4B
8/11
8MF6886-4ES
5/10
8MR2122-8A
8/11
8MF6886-4R
2/7
8MR2122-8AA
8/11
8MF6886-5E
5/8
8MR2122-8B
8/11
8MF6886-5R
5/8
8MR2130-0A
8/10
8MF6888-4E
2/7
8MR2130-1A
8/10
8MF6888-4R
2/7
8MR2130-1BA
8/10
8MF6888-5E
5/8
8MR2130-3A
8/10
8MF6888-5R
5/8
8MR2130-3BA
8/10
8MF6894-4E
2/7
8MR2130-4A
8/10
8MF6894-4ES
5/10
8MR2130-4BA
8/10
8MF6894-4R
2/7
8MR2130-5A
8/10
8MF6894-5E
5/8
8MR2130-6A
8/10
8MF6894-5R
5/8
8MR2130-7A
8/10
8MF6896-4E
2/7
8MR2131-0A
8/10
8MF6896-4ES
5/10
8MR2131-4A
8/10
8MF6896-4R
2/7
8MR2131-5A
8/10
8MF6896-5E
5/8
8MR2132-0A
8/10
8MF6896-5R
5/8
8MR2132-0AB
8/10
8MF6898-4E
2/7
8MR2132-1A
8/10
8MF6898-4R
2/7
8MR2132-1AB
8/10
8MF6898-5E
5/8
8MR2132-5A
8/10
8MF6898-5R
5/8
8MR2132-5AB
8/10
8MF8806
4/17
9I999
8MR2140-0A
8/11
EAR99H
8MF8807
4/17
9I999
8MR2140-0B
8/11
EAR99H
8MF8810
4/17
9I999
8MR2140-1A
8/11
EAR99H
8MF9 300
7/3
8MR2140-1B
8/11
EAR99H
8MF9 301
7/3
8MR2140-2A
8/11
EAR99H
8MF9 305
7/3
8MR2140-2B
8/11
8MF9052
3/15
8MR2140-3A
8/11
EAR99H
8MF9055
3/15
8MR2140-3B
8/11
EAR99
8MF9056
3/15
8MR2140-3C
8/12
8MF9060
3/15
8MR2140-3D
8/12
8MF9061
3/15
8MR2140-4A
8/11
EAR99H
8MF9062
3/15
8MR2140-4B
8/11
8MF9065
3/15
8MR2140-5C
8/12
8MF9066
3/15
8MR2140-5D
8/12
8MR2140-6C
8/11
Siemens LV 50 2014
9/33
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
Page
Export markings
ECCN
AL
8/11
8MR2201-1A
7/4
8MR2150-0A
8/12
8MR2201-1B
7/4
8MR2150-0BA
8/12
8MR2210-1A
7/5
8MR2150-0C
8/12
8MR2210-1B
7/5
8MR2150-0CA
8/12
8MR2210-1C
7/5
8MR2150-2A
8/12
8MR2210-2A
7/5
8MR2150-2B
8/12
8MR2210-2B
7/5
8MR2150-2C
8/12
8MR2210-2C
7/5
8MR2150-2D
8/12
8MR2210-3A
7/5
8MR2150-3A
8/12
8MR2210-3B
7/5
8MR2150-3B
8/12
8MR2210-3C
7/5
8MR2150-4A
8/12
8MR2210-4A
7/5
8MR2150-4AA
8/12
8MR2210-4B
7/5
8MR2150-4AB
8/12
8MR2210-4C
7/5
8MR2150-4B
8/12
8MR6000-0AM10
8/7
8MR2150-5A
8/12
8MR6000-0AM25
8/7
8MR2150-5AA
8/12
8MR6000-0AM30
8/7
8MR2150-5AB
8/12
8MR6000-0AM45
8/7
8MR2150-5B
8/12
8MR6000-0AM67
8/7
8MR2151-2A
8/12
8MR6000-5DE40
8/7
8MR2151-2B
8/12
8MR6311-5DL40
8/7
8MR2151-3A
8/12
8MR6311-5DL42
8/7
8MR2151-3B
8/12
8MR6323-5DL40
8/7
8MR2170-1A
8/14
8MR6323-5DL42
8/7
8MR2170-1AF
8/14
8MR6400-2GV10
8/6
8MR2170-1B
8/14
8MR6400-2GV25
8/6
8MR2170-1BF
8/14
8MR6400-2GV45
8/6
8MR2170-1C
8/14
8MR6400-2GV67
8/6
8MR2170-1CA
8/13
8MR6400-5GV10
8/6
8MR2170-1CB
8/13
8MR6400-5GV25
8/6
8MR2170-1DA
8/13
8MR6400-5GV30
8/6
8MR2170-1DB
8/13
8MR6400-5GV45
8/6
8MR2170-1E
8/14
8MR6400-5GV67
8/6
8MR2170-1EA
8/14
8MR6400-6GV30
8/6
8MR2170-1GA
8/14
8MR6400-6GV45
8/6
8MR2170-1GB
8/14
8MR6402-2LV41
8/5
8MR2170-1GC
8/14
8MR6411-5LV10
8/5
8MR2170-2A
8/14
8MR6411-5LV25
8/5
8MR2170-2AF
8/14
8MR6411-5LV30
8/5
8MR2170-2BA
8/13
8MR6411-5LV41
8/5
8MR2170-2BB
8/13
8MR6411-5LV45
8/5
8MR2170-2BF
8/14
8MR6411-5LV60
8/5
8MR2170-4E
8/15
8MR6411-5LV80
8/5
8MR2170-4F
8/15
8MR6411-6LV30
8/6
8MR2171-1BA
8/13
8MR6411-6LV41
8/6
8MR2171-1BB
8/13
8MR6411-6LV45
8/6
8MR2171-2BA
8/13
8MR6423-2LV10
8/5
8MR2171-2BB
8/13
8MR6423-2LV25
8/5
8MR2171-3BB
8/13
8MR6423-2LV41
8/5
8MR2172-1A
8/14
8MR6423-2LV45
8/5
8MR2172-1AB
8/14
8MR6423-2LV60
8/5
8MR2172-2A
8/14
8MR6423-5DE04
8/8
8MR2180-1A
8/15
8MR6423-5DE08
8/8
8MR2180-1B
8/15
8MR6423-5DE12
8/8
8MR2190-1A
8/7
8MR6423-5DE15
8/8
8MR2200-1A
7/4
8MR6423-5DE20
8/8
8MR2200-1B
7/4
8MR6423-5EG04
8/8
Siemens LV 50 2014
AL
Article No.
8MR2140-6D
9/34
ECCN
Siemens AG 2014
Appendix
Article number index
incl. export markings
Article No.
Page
Export markings
ECCN
AL
8MR6423-5EG06
8/8
8MR6423-5EG08
8/8
8MR6423-5LV10
8/5
8MR6423-5LV25
8/5
8MR6423-5LV30
8/5
8MR6423-5LV41
8/5
8MR6423-5LV45
8/5
8MR6423-5LV60
8/5
8MR6423-5LV80
8/5
8MR6423-5ML36
8/9
8MR6423-5ML80
8/9
8MR6423-5SK10
8/8
8MR6423-5SK15
8/8
8MR6423-5SK20
8/8
8MR6423-6LV30
8/6
8MR6423-6LV41
8/6
8MR6423-6LV45
8/6
8MR6440-5DE30
8/8
8MR6440-5DE40
8/8
8MR6440-5EG30
8/8
8MR6440-5EG40
8/8
8MR6440-5EG60
8/8
8MR6500-5GV25
8/6
8MR6500-5GV30
8/6
8MR6500-5GV45
8/6
8MR6500-5GV67
8/6
8MR6500-6GV30
8/6
8MR6500-6GV45
8/6
8MR6511-5LV25
8/5
8MR6511-5LV30
8/5
8MR6511-5LV41
8/5
8MR6511-5LV45
8/5
8MR6511-5LV60
8/5
8MR6511-5LV80
8/5
8MR6511-6LV30
8/6
8MR6511-6LV41
8/6
8MR6511-6LV45
8/6
8MR6523-5LV25
8/5
8MR6523-5LV30
8/5
8MR6523-5LV45
8/5
8MR6523-5LV60
8/5
8MR6523-5LV80
8/5
8MR6523-6LV30
8/6
8MR6523-6LV41
8/6
8MR6523-6LV45
8/6
Siemens LV 50 2014
9/35
Siemens AG 2014
Appendix
Conditions of sale and delivery
Overview
By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products, by
any Siemens entity having a registered office outside of Germany, shall be subject exclusively to the General Terms and Conditions of the respective Siemens entity. The following terms apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in Germany
The General Terms of Payment as well as the General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry shall apply.
For software products, the General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office in Germany shall apply.
For customers with a seat or registered office outside of
Germany
The General Terms of Payment as well as the General Conditions for Supplies of Siemens, Automation and Drives for Customers with a Seat or registered Office outside of Germany shall
apply.
For software products, the General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office outside of Germany shall apply.
General
The dimensions are in mm. In Germany, according to the German law on units in measuring technology, data in inches only
apply to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the corresponding pages,
- especially with regard to data, dimensions and weights given these are subject to change without prior notice.
The prices are in (Euro) ex works, exclusive packaging.
The sales tax (value added tax) is not included in the prices.
It shall be debited separately at the respective rate according to
the applicable legal regulations.
Prices are subject to change without prior notice. We will debit
the prices valid at the time of delivery.
Surcharges will be added to the prices of products that contain
silver, copper, aluminum, lead and/or gold if the respective basic official prices for these metals are exceeded. These surcharges will be determined based on the official price and the metal
factor of the respective product.
The surcharge will be calculated on the basis of the official price
on the day prior to receipt of the order or prior to the release
order.
The metal factor determines the official price as of which the metal surcharges are charged and the calculation method used.
The metal factor, provided it is relevant, is included with the
price information of the respective products.
You will find
an exact explanation of the metal factor
the text of the Comprehensive Terms and Conditions of Sale
and Delivery of Siemens AG
in the Internet under
www.siemens.com/automation/salesmaterial-as/catalog/en/
terms_of_trade_en.pdf
9/36
Siemens LV 50 2014
Export regulations
Siemens shall not be obligated to fulfill this agreement if such fulfillment is prevented by any impediments arising out of national
or international foreign trade or customs requirements or any
embargoes or other sanctions.
If Purchaser transfers goods (hardware and/ or software and/ or
technology as well as corresponding documentation, regardless
of the mode of provision) delivered by Siemens or works and
services (including all kinds of technical support) performed by
Siemens to a third party worldwide, Purchaser shall comply with
all applicable national and international (re-) export control regulations. In any event Purchaser shall comply with the (re-) export
control regulations of the Federal Republic of Germany, of the
European Union and of the United States of America.
If required to conduct export control checks, Purchaser, upon
request by Siemens, shall promptly provide Siemens with all information pertaining to particular end customer, destination and
intended use of goods, works and services provided by Siemens, as well as any export control restrictions existing.
Purchaser shall indemnify and hold harmless Siemens from and
against any claim, proceeding, action, fine, loss, cost and damages arising out of or relating to any noncompliance with export
control regulations by Purchaser, and Purchaser shall compensate Siemens for all losses and expenses resulting thereof, unless such noncompliance was not caused by fault of the
Purchaser. This provision does not imply a change in burden of
proof.
The products listed in this catalog / price list may be subject to
European / German and/or US export regulations.
Therefore, any export requiring a license is subject to approval
by the competent authorities.
According to current provisions, the following export regulations
must be observed with respect to the products featured in this
catalog / price list:
AL
ECCN
Even without a label, or with label "AL:N" or "ECCN:N", authorization may be required due to the final end-use and destination for
which the goods are to be used.
In addition, you can preview the export designations via our "Industry Mall" online catalog system in the respective product description. The deciding factors are the AL or ECCN export authorization indicated on order confirmations, delivery notes and invoices.
Errors excepted and subject to change without prior notice.
Siemens AG 2014
Catalogs
Industry Automation, Drive Technologies and Low-Voltage Power Distribution
Further information can be obtained from our branch offices
listed at www.siemens.com/automation/partner
System Solutions for Industry
Interactive Catalog on DVD
Catalog
ET G1
D 11
D 12
D 15.1
D 18.1
D 21.3
D 23.1
D 23.2
D 31
D 84.1
D 86.1
D 86.2
DA 12
DA 21.1
DA 21.2
DA 22
DA 45
DA 48
DA 51.2
DA 51.3
DA 65.10
DA 65.11
DA 65.3
DA 65.4
D 81.1
D 87.1
MD 50.1
MD 50.11
MD 10.1
MD 10.2
MD 30.1
MD 31.1
Catalog
LV 10
Motion Control
SINUMERIK & SIMODRIVE
Automation Systems for Machine Tools
SINUMERIK & SINAMICS
Equipment for Machine Tools
SINUMERIK 840D sl Type 1B
Equipment for Machine Tools
SINUMERIK 808
Equipment for Machine Tools
SINUMERIK 828
Equipment for Machine Tools
SIMOTION, SINAMICS S120 & SIMOTICS
Equipment for Production Machines
Drive and Control Components for Cranes
LV 11
LV 35
LV 36
LV 50
LV 51
LV 52
LV 56
LV 70
ET D1
NC 60
NC 61
NC 62
NC 81.1
NC 82
PM 21
CR 1
Power Supply
Power supply SITOP
KT 10.1
Safety Integrated
Safety Technology for Factory Automation
SI 10
ST 80/
ST PC
SIMATIC Ident
Industrial Identification Systems
ID 10
ST 70
ST PCS 7
ST PCS 7 T
ST PCS 7 AO
SIMATIC NET
Industrial Communication
IK PI
IC 10
FI 01
MP 31
WT 10
PA 01
PA 11
Information and Download Center
Digital versions of the catalogs are available on the Internet at:
www.siemens.com/lowvoltage/infomaterial
Siemens AG 2014
Siemens AG
Infrastructure & Cities Sector
Low and Medium Voltage Division
Low Voltage & Products
Postfach 10 09 53
93009 REGENSBURG
GERMANY
www.siemens.com/lowvoltage