Documente Academic
Documente Profesional
Documente Cultură
OFF: PLOT W -281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701.
TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021
WEB SITE:www.hansucontrols.com,E-Mail:hansucontrols29@rediffmail.com,hansucontrols@yahoo.com
F/CATALOGUE / LIGHT-FITTINGS
PAGE
1 OF 6
CATEGORY-HY
SPECIFICATION & QUOTATION FOR FLAMEPROOF/W.PROOF LIGHT FITTINGS
Supply of Cast Aluminium LIGHT FITTINGS dust, vermain and Flameproof & Weatherproof suitable for Structure mounting.
All the enclosures are cast out of superior quality aluminium alloy. All the surfaces are carefully cleaned and levelled so as
to give very smooth surface. All the enclosures are chromatised and finally epoxy powder coated by static charge spray
method by light grey shade 631 as per IS5. Powder coating gives very tough durable and extremely smooth surface. All the
mating surfaces are provided with round rubber gasket in the groove so as to make it effectively dust and vermain proof.
Prototype LIGHT FITTINGS with control gear fitted is tested by C.M.R.I for Explosion proof-ness and for IP65 Class of
protection. MOUNTING: M.S.Strip is provided for fixing. CABLE ENTRIES: Threaded cable entries are provided. Unless
otherwise specified no gland will be provided. EARTHING: Earthing is provided on both sides of enclosures by 5mm screw
with two plain washers and spring washer of brass.
INSPECTION & TESTING: Each LIGHT FITTINGS will be subjected to routine tests in accordance with relevant Indian
Standards & including following:
(1) Dimensional check as per drawing. (2) Operation test. (3) Insulation test with 500V Megger. (4) HV Test at 2KV for 60
Seconds. (5) Earth continuity test.
SPECIFIC REQUIREMENTS FOR EXPLOSION/WEATHERPROOF WELGLASSES
CODE
DRAWING
HY53
DESCRIPTION
WITHOUT CONTROL
GEAR BOX
FRONT VIEW
HY62
SIDE VIEW
OPEN VIEW 1
OPEN VIEW 2
SIDE VIEW
OPEN VIEW
F/CATALOGUE / LIGHT-FITTINGS
CODE
PAGE
2 OF 6
DRAWING
DESCRIPTION
HY55
FRONT VIEW
SIDE VIEW
HY57
OPEN VIEW 1
OPEN VIEW 2
SIDE VIEW
OPEN VIEW
CATEGORY-HY
SPECIFICATION & QUOTATION FOR WEATHERPROOF LIGHT FITTINGS
Supply of Cast Aluminium LIGHT FITTINGS dust, vermin and Weather proof suitable for Structure mounting. All the
enclosures are cast out of superior quality aluminum alloy. All the surfaces are carefully cleaned and leveled so as to give
very smooth surface. All the enclosures are chromatised and finally epoxy powder coated by static charge spray method by
light grey shade 631 as per IS5. Powder coating gives very tough durable and extremely smooth surface. All the mating
surfaces are provided with round rubber gasket in the groove so as to make it effectively dust and vermin proof.
MOUNTING: Arrangement provided for fixing. CABLE ENTRIES: Threaded cable entries are provided. Unless otherwise
specified no gland will be provided. EARTHING: Earthing is provided on both sides of enclosures by 5mm screw with two
plain washers and spring washer of brass
INSPECTION & TESTING: Each LIGHT FITTINGS will be subjected to routine tests in accordance with relevant Indian
Standards & including following (1) Dimensional check as per drawing. (2) Operation test. (3) Insulation test with 500V
Megger. (4) HV Test at 2KV for 60 Seconds. (5) Earth continuity test.
HANSU CONTROLS
OFF: PLOT W -281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701.
TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021
WEB SITE:www.hansucontrols.com,E-Mail:hansucontrols29@rediffmail.com,hansucontrols@yahoo.com
HANSU CONTROLS
OFF: PLOT W -281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701.
TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021
WEB SITE:www.hansucontrols.com,E-Mail:hansucontrols29@rediffmail.com,hansucontrols@yahoo.com
F/CATALOGUE / LIGHT-FITTINGS
PAGE
3 OF 6
SPECIFIC REQUIREMENTS FOR WEATHERPROOF WELLGLASS LIGHT FITTINGS
CODE
DRAWING
SPECIFICATION
HY10
FRONT VIEW
SIDE VIEW
HY12
OPEN VIEW
FRONT VIEW
HY03
SIDE VIEW
OPEN VIEW 1
OPEN VIEW 2
FRONT VIEW
OPEN VIEW 1
OPEN VIEW 2
F/CATALOGUE /LIGHT-FITTINGS
CODE
DRAWING
PAGE
4 OF 6
SPECIFICATION
HY08
FRONT VIEW
HY09
FRONT VIEW
HY17
TOP/BOTTOM VIEW
SIDE VIEW
OPEN VIEW
FRONT VIEW
FRONT VIEW 2
OPEN VIEW
HANSU CONTROLS
OFF: PLOT W -281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701.
TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021
WEB SITE:www.hansucontrols.com,E-Mail:hansucontrols29@rediffmail.com,hansucontrols@yahoo.com
HANSU CONTROLS
OFF: PLOT W -281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701.
TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021
WEB SITE:www.hansucontrols.com,E-Mail:hansucontrols29@rediffmail.com,hansucontrols@yahoo.com
F/CATALOGUE /LIGHT-FITTINGS
PAGE
5 OF 6
CODE
DRAWING
SPECIFICATION
HY26
FRONT VIEW
OPEN VIEW
CATEGORY-HY
SPECIFICATION & QUOTATION FOR IND. WEATHER PROOF FRP WELGLASS
Supply of FRP (FIBRE GLASS POLYSTER) WELLGLASS dust and vermin proof & weatherproof suitable for Structure
mounting. All enclosures are hot press moulded in single piece out of 20-25% DMC/SMC light grey shade 631 compound.
All the mating surfaces are provided with round Neoprene rubber gasket in the groove so as to make it effectively dust/nd
vermin proof. It is provided with S.S. wire guard & J hook.MOUNTING: S.S. Strip is provided for fixing. CABLE ENTRIES:
Threaded cable entries are provided. Unless otherwise specified no gland will be provided. EARTHING: Earthing is
provided on both sides of enclosures by 5mm screw with two plain washers and spring washer of brass. INSPECTION &
TESTING: Each WELL GLASS will be subjected to routine tests in accordance with relevant Indian Standards and including
following.(1) Dimensional check as per drawing. (2) Operation test. (3) Insulation test with 500V Megger.(4) HV Test at 2KV
for 60 Seconds. (5) Earth continuity test. HARDWARE: All external hardware will be of S.S.316 with degree of protection
IP65.
DRAWING
HY28
FRONT VIEW
SPECIFICATION
Supply HOT PRESS MOULDED FRP (FIBRE GLASS RE_INFORCED
POLYSTER) Industrial weatherproof well glass LIGHT FITTING for
80/125W HPMV lamp or 70W HPSV Lamp or 2X36W CFL lamp without
control gear without bulb but with Heat resistant Glass. Direct cable
termination on. CERAMIC ES type threaded lamp holder. S.S. Strip will
be provided at the top for structure mounting. It will be complete with S.S.
wire guard and J Hook.
SIZE: 340x195x195mm Type: HY28
NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL
AND ACTUAL PRODUCT WILL BE AS PER YOUR SPECIFICATION
SIDE VIEW
OPEN VIEW
F/CATALOGUE /LIGHT-FITTINGS
CODE
DRAWING
PAGE
HY29
FRONT VIEW
TOP/BOTTOM VIEW
HY30
6 OF 6
SPECIFICATION
Supply HOT PRESS MOULDED FRP (FIBRE GLASS RE_INFORCED
POLYSTER) Industrial weatherproof well glass LIGHT FITTING for
80/125W HPMV lamp or 70W HPSV Lamp or 2X36W CFL lamp with
control gear in top FRP enclosure without or with integral canopy,
without bulb but with Heat resistant Glass. It will be with terminals in
top enclosure. CERAMIC ES type threaded lamp holder
will be
provided S.S. Strip will be provided at the top for structure mounting. It
will be complete with S.S. wire guard and J Hook.
SIZE: 455x195x195mm Type: HY29
NOTE: IMAGES, DRAWING AND WIRING DIAGRAM ARE TYPICAL
AND ACTUAL PRODUCT WILL BE AS PER YOUR SPECIFICATION
AND ORDER.
OPEN VIEW 1
OPEN VIEW 2
FRONT VIEW
TOP/BOTTOM VIEW
HY31
FRONT VIEW
TOP/BOTTOM VIEW
SIDE VIEW
OPEN VIEW
HANSU CONTROLS
OFF: PLOT W -281, TTC INDUSTRIAL AREA, RABALE, MIDC, NEW MUMBAI-400 701.
TEL :( 022) 27690037, 65193145, CELL: 9821550302, FAX: 27690038, 25001021
WEB SITE:www.hansucontrols.com,E-Mail:hansucontrols29@rediffmail.com,hansucontrols@yahoo.com