Documente Academic
Documente Profesional
Documente Cultură
https://en.wikipedia.org/wiki/Eddy-current_testing
Eddy-current testing
From Wikipedia, the free encyclopedia
Eddy-current testing (also commonly seen as eddy current testing and ECT) is one of many electromagnetic testing methods used in
nondestructive testing (NDT) making use of electromagnetic induction to detect and characterize surface and sub-surface flaws in
conductive materials.
Contents
1 History
2 ECT principle
3 Applications[6][7]
3.1 ECT on surfaces
3.2 Other applications
4 Other eddy current testing techniques
4.1 Pulsed eddy current
4.2 Eddy current array
5 See also
6 References
7 External links
History
Eddy current testing (ECT) as a technique for testing finds its roots in electromagnetism. Eddy currents were first observed by Franois
Arago in 1824, but French physicist Lon Foucault is credited with discovering eddy currents in 1855. ECT began largely as a result of
the English scientist Michael Faraday's discovery of electromagnetic induction in 1831. Simply put, Faraday discovered that when there
is a closed path through which the current can circulate and that a magnetic field passes through a conductor (or vice versa), an electric
current flows through this conductor.
In 1879, another English-born scientist, David Edward Hughes, demonstrated how the properties of a coil change when placed in
contact with metals of different conductivity and permeability, which was applied to metallurgical sorting tests.[1]
Although there were a number of encouraging developments in the 19th century, much of the actual development of ECT as an NDT
technique for industrial applications was carried out during World War II in Germany. Professor Friedrich Frster while working for the
Kaiser-Wilhelm Institute (now the Kaiser Wilhelm Society) adapted eddy current technology to industrial use, developing instruments
measuring conductivity and sorting mixed ferrous components. After the War, in 1948, Frster founded a company known today the
Foerster Group (http://www.foerstergroup.com/) where he made great strides in developing practical ECT instruments and marketing
them.[2]
Eddy current testing is now a widely used and well understood inspection technique for flaw detection, as well as thickness and
conductivity measurements.
Frost & Sullivan analysis in the global NDT equipment market in 2012 estimated the magnetic and electromagnetic NDT equipment
market at $220 million, which includes conventional eddy current, magnetic particle inspection, eddy current array, and remote-field
testing. This market is projected to grow at 7.5% compounded annual growth rate to approximately $315 million by 2016.[3]
ECT principle
In its most basic form the single-element ECT probe a coil of conductive wire is excited with an alternating electrical current. This
wire coil produces an alternating magnetic field around itself in the direction ascertained by the right-hand rule. The magnetic field
oscillates at the same frequency as the current running through the coil. When the coil approaches a conductive material, currents
opposed to the ones in the coil are induced in the material eddy currents.
Variations in the electrical conductivity and magnetic permeability of the test object, and the presence of defects causes a change in
eddy current and a corresponding change in phase and amplitude that can be detected by measuring the impedance changes in the
coil, which is a telltale sign of the presence of defects.[4] This is the basis of standard (pancake coil) ECT.
ECT has a very wide range of applications. Because ECT is electrical in nature, it is limited to conductive material. There are also
physical limits to generating eddy currents and depth of penetration (skin depth).[5]
Applications[6][7]
The two major applications of eddy current testing are surface inspection and tubing inspections. Surface inspection is used extensively
in the aerospace industry. The technique is very sensitive and can detect tight cracks. Surface inspection can be performed both on
ferromagnetic and non-ferromagnetic materials.
Tubing inspection is generally limited to non-ferromagnetic tubing and is known as conventional eddy current testing. Conventional ECT
is used for inspecting steam generator tubing in nuclear plants and heat exchangers tubing in power and petrochemical industries. The
technique is very sensitive to detect and size pits. Wall loss or corrosion can be detected but sizing is not accurate.
1 3
27/01/2016 06:11
https://en.wikipedia.org/wiki/Eddy-current_testing
A variation of conventional ECT for partially magnetic materials is full saturation ECT. In this technique, permeability variations are
suppressed by applying a magnetic field. he saturation probes contain conventional eddy current coils and magnets. This inspection is
used on partially ferromagnetic materials such as nickel alloys, duplex alloys, and thin-ferromagnetic materials such as ferritic chromium
molybdenum stainless steel. The application of a saturation eddy current technique depends on the permeability of the material, tube
thickness, and diameter.[8]
A method used for carbon steel tubing is remote field eddy current testing. This method is sensitive to general wall loss and not sensitive
to small pits and cracks.
ECT on surfaces
When it comes to surface applications, the performance of any given inspection technique depends greatly on the specific conditions
mostly the types of materials and defects, but also surface conditions, etc. However, in most situations, the following are true:
Effective on coatings/paint: yes
Computerized record keeping: partial
3D/Advanced imaging: none
User dependence: high
Speed: low
Post-inspection analysis: none
Requires chemicals/consumables: no
Other applications
ECT is also useful in making electrical conductivity and coating thickness measurements, among others.
See also
Eddy current
Nondestructive testing
Alternating current field measurement
Cover Meter
Metal detector
2 3
27/01/2016 06:11
https://en.wikipedia.org/wiki/Eddy-current_testing
Skin effect
References
1. Ivor Hughes. " (http://davidedwardhughes.com/David_Edward_Hughes.pdf)The AWA Review: Professor David Edward Hughes", 2009, retrieved
July 1, 2015
2. Nikhil Jahain. "The Rebirth of Eddy Current Testing" (http://www.qualitymag.com/articles/92056-the-rebirth-of-eddy-current-nondestructive-testing),
2014, retrieved July 1, 2015
3. Nikhil Jahain. "The Rebirth of Eddy Current Testing" (http://www.qualitymag.com/articles/92056-the-rebirth-of-eddy-current-nondestructive-testing),
2014, retrieved July 1, 2015
4. Joseph M. Buckley. "An Introduction to Eddy Current Testing Theory and Technology" (http://www.joe.buckley.net/papers/eddyc.pdf), retrieved July
1, 2015
5. Terry Hennigar and Mike Wright. "Eddy Current Testing Technology", 1st edition, 2012
6. Birring, Anmol (March 2001). "Selection of NDT Techniques for Heat Exchanger Tubing". Materials Evaluation.
7. Birring, Anmol (November 2003). "Eddy Current Testing in the Petrochemical Industry". Materials Evaluation.
8. H M Sadek. "NDE technologies for the examination of heat exchangers and boiler tubes principles, advantages and limitations" (http://www.ndt.net
/article/insight/papers/insi_48_3_181.pdf), Insight vol. 48 no. 3, March 2006, retrieved July 1, 2015
9. NDT Resource Center. Pulsed Eddy Current Inspection (https://www.nde-ed.org/EducationResources/CommunityCollege/EddyCurrents
/AdvancedTechniques/pulsedecinspection.htm), retrieved July 1, 2015
10. NDT Resource Center. Background on Pulsed Eddy Current (https://www.nde-ed.org/EducationResources/CommunityCollege/EddyCurrents
/AdvancedTechniques/background.htm), retrieved July 1, 2015
11. Pulsed Eddy-Current Testing. Retrieved on July 18, 2012. (http://www.tuv.com/en/corporate/business_customers/materials_testing_and_inspection
/advanced_ndt/pulsed_eddy_current/pulsed_eddy_current.jsp)
12. Eddy Current Array (http://www.eddyfi.com/technologies/eddy-current-arrays/), retrieved July 2, 2015
13. Eddy Current Array (ECA) Theory, Practice and Application (http://www.azom.com/article.aspx?ArticleID=8016), retrieved July 2, 2015
External links
An introduction to eddy current testing from the NDE/NDT resource center (http://www.ndt-ed.org/EducationResources
/CommunityCollege/EddyCurrents/Introduction/IntroductiontoET.htm)
Intro to Eddy Current Testing (http://www.joe.buckley.net/papers/eddyc.pdf) by Joseph M. Buckley (pdf, 429 kB)
Eddy Current Testing at Level 2 (http://www-pub.iaea.org/MTCD/publications/PDF/TCS-48_web.pdf), International Atomic Energy
Agency, Vienna, 2011 (pdf 5.6 MB).
Retrieved from "https://en.wikipedia.org/w/index.php?title=Eddy-current_testing&oldid=697733362"
Categories: Nondestructive testing
This page was last modified on 1 January 2016, at 15:04.
Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you
agree to the Terms of Use and Privacy Policy. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit
organization.
3 3
27/01/2016 06:11