Documente Academic
Documente Profesional
Documente Cultură
This application can be used with AutoCAD to modify closed polylines. You can unite,
intersect, subtract, divide and trim closed polylines. APLUS commands PLU, PLI,
PLS, PLD, PLT and PLIN are similar to Boolean commands however Boolean
commands (UNION, SUBTRACT and INTERSECT) create only composite solids,
surfaces, or regions. With the POLYLINES application you can create composite
polylines by subtracting, combining, or finding the intersection of closed polylines
similarly to Boolean commands.
The POLYLINES add-on makes easy opening closed polylines and enclosing
opened polylines. It lets you purge polylines of needless elements, move, rotate and
align polylines segments and more!
APLUS offers tools to make process of drawing and editing polylines faster and
easier than standard AutoCAD commands. APLUS makes better use of polylines
properties for measuring areas. It is also easier to fill enclosed polylines with hatch
(pattern or solid fill), move vertices or polylines segments. Additionally, the
information contained by polylines can be used to create schedules of room areas,
finishes etc, which can be easily done with APLUS.
APLUS recommends using polylines instead of lines for drawing. A rectangle made
of lines consists of 4 objects, while rectangle drawn as polyline is saved as 1 object.
4 lines have 8 vertices, 1 polyline has 4 vertices. Polyline has consistent object
properties such as layer, color, line type etc. Also for polyline it is necessary to set
properties only once, while matching properties of many separate lines can be time
consuming. Dwg file drawn with polylines is 4 times smaller than the file with lines.
Getting Started|Install/Uninstall|Additional Information|Contact|Version History
Getting Started
To launch the add-on use the following commands:
PLU combines closed polylines by addition
PLI creates closed polylines from overlapping polylines
PLS subtracts closed polylines from another polylines
PLD divides closed polyline into parts by another polyline
Usage
The POLYLINES application integrates its menu into AutoCAD upper menu and
toolbar. To show application toolbar use APLUST command in command line. All
commands are still accessible from upper menu.
There are three basic methods of running application command:
1. Use AutoCAD > APLUS > POLYLINES > upper menu to find commands.
2. Use APLUS toolbar (if you wish to turn it on, type APLUST command).
3. Type command directly in AutoCAD command line.
PLU
COMBINES CLOSED POLYLINES BY ADDITION
You can combine two or more closed polylines into composite closed polyline (or
polylines). The resulting composite polylines include the area enclosed by all of the
selected polylines.
PLI
CREATES CLOSED POLYLINES FROM OVERLAPPING
POLYLINES
You can create a closed polyline from the common area of two intersecting closed
polylines. APLUS finds the intersecting area of two polylines and creates new
polylines from the common area. If there is no intersection, all selected polylines are
deleted.
PLS
COMBINES CLOSED POLYLINE BY SUBTRACTION
Select one set of closed polylines you want to keep, then select another set of closed
polylines you want to subtract. Polylines in the second selection set are subtracted
from objects in the first selection set. New closed polylines are created.
PLD
DIVIDES CLOSED POLYLINE INTO PARTS BY ANOTHER
POLYLINE
Select a closed polyline that you want to subdivide, then select a closed polyline that
is a divider. First polyline is divided into closed polylines.
PLT
TRIMS OFF CLOSED POLYLINE FROM ANOTHER POLYLINE
Select one set of closed polylines that you want to trim, then select another set of
trimming polylines. Polylines selected first are divided into segments while polylines
selected second (trimming polylines) remain unchanged.
PLIN
GENERATES CLOSED POLYLINES FROM OVERLAPPING
POLYLINES
You can create a closed polyline from the common area of two intersecting closed
polylines. APLUS finds the intersecting area of two polylines and creates new
polylines from the common area. If there is no intersection, all selected polylines are
deleted.
PLI command is similar to this command, however this command modifies only
polylines selected first while second polylines remain unchanged.
PLC
CLOSES OPENED POLYLINE
Select an opened polyline (or polylines) to enclose it.
PLO
OPENS CLOSED POLYLINE
Select a closed polyline to open it. The polyline gets opened by erasing its last
segment (automatically).
PLP
PURGES POLYLINE
Select polylines to purge of needless elements such as doubled vertices. All
elements to be deleted are highlighted in red.
PLW
PLWS
CHANGES WIDTH OF POLYLINES SEGMENT
ALPL
ALIGNS SELECTED POLYLINES SEGMENTS
MPL
MOVES SELECTED POLYLINES SEGMENT
ROPL
ROTATES SELECTED POLYLINES SEGMENT
PLR
Additional Information
Copyright 2006-2013 CADAPLUS. All Rights Reserved.
Any technical documentation that is made available by CADAPLUS is the
copyrighted work of CADAPLUS and is owned by CADAPLUS.
Known Issues
None.
Contact
If you like commands included in this add-on, visit www.cadaplus.com and learn
more about APLUS features. The APLUS application contains over 1200 new
commands written to speed up drafting. APLUS comes as a package with both new
commands for AutoCAD and set of blocks ready to use with APLUS BIINDEX menu!
APLUS Application is available at Autodesk Exchange Apps!
For more information, please visit http://www.cadaplus.com
Support Information
Do you need improvement or new commands? Email us at aplus@cadaplus.com
Version History
15.012 Original release
1.0.0 Original release.