Documente Academic
Documente Profesional
Documente Cultură
Support
FAQs
BUSINESS
SERVICE PROVIDERS
SUPPORT
SHOP
SearchAll
Step 2
Double-click theLocal Area Connectionicon; highlight Internet Protocol (TCP/IP) tab in the Local Area Connection Properties window that
appears:
Step 3
Double click it or clickProperties. The TCP/IP Properties window will display.
Step 4
Now you have two ways to configure the TCP/IP protocol below:
1. Assigned by DHCP Sever
SelectObtain an IP address automaticallyandObtain DNS Server address automatically, as shown in the figure below. These may be selected
by default. Then clickOKto save setting.
2. Assigned manually
1) SelectUse the following IP address, as shown in the following figure.
2) SelectUse the following DNS server addresses, as shown in the following figure. And then type the DNS server IP address, which should be
provided by your ISP. Finally remember to clickOKto save settings.
Note: In most cases, type your local area DNS server IP addresses into it.
The Preferred DNS server is same todefault gateway. For Secondary DNS server, you could leave it blank or type in 8.8.8.8.
Step 5
Click OK to save and apply your settings.
Step 2
Typencpa.cplin the box, then pressOK.
Step 3
Step 4
SelectInternet Protocol Version 4(TCP/IPv4), double click it or clickProperties.
Step 5
There are two ways to configure the TCP/IP Properties, Assigned by DHCP server automaticallyormanually.
1. Assigned by DHCP server
SelectObtain an IP address automaticallyandObtain DNS server address automatically. If necessary, then clickOKto save the settings.
2. Assigned manually
1) SelectUse the following IP address, type IP address, subnet mask and default gateway IP address into it.
2) SelectUse the following DNS server addresses, as shown in the following figure. And then type the DNS server IP address, which should be
provided by your ISP. If necessary, then clickOKto save the settings.
Note: In most cases, type your local area DNS server IP addresses into it.
The Preferred DNS server is same todefault gateway. For Secondary DNS server, you could leave it blank or type in 8.8.8.8.
Step 6
Click OK to save and apply your settings.
For Windows 8
1)Press
Windowskey
+F , a search box will come out, please inputcontrol paneland press enter;
Press Windowskey+ R, then there will be a run box, inputcontrol paneland press enter;
3)Press
control panel ;
control panel
the left) ;
Step 2
Right click on
Step 3
There are two ways to configure the TCP/IP Properties, Assigned by DHCP server automaticallyormanually.
1. Assigned by DHCP server
SelectObtain an IP address automaticallyandObtain DNS server address automatically. If necessary, then clickOKto save the settings.
2.Assigned manually
1) SelectUse the following IP address, type IP address, subnet mask and default gateway IP address into it.
2)SelectUse the following DNS server addresses, as shown in the following figure. And then type the DNS server IP address, which should be
provided by your ISP. If necessary, then clickOKto save the settings.
Note:In most cases, type your local area DNS server IP addresses into it.
The Preferred DNS server is same todefault gateway. For Secondary DNS server, you could leave it blank or type in 8.8.8.8.
Step 4
ClickOKto save and apply your settings.
For MAC:
Step 1
Click theApplemenu->selectSystem Preferences->Network-> HighlightEthernet.
Step 2
Input theConfigure IPv4field, you have four ways to configure the IPv4 below:
x is from 2
2) Select using DHCP with manual address.If the router s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x
to 253
thenfillintheparametersyouneed.Pleasedontselectitifitsunnecessary.
Select"Manually", and then fill in the parameters like below. If necessary, then clickApply.
Note:
1. DNS server should be provided by your ISP. Please contact with your ISP to check them.
2. In most cases, you could type your local area DNS server IP addresses into it. The DNS server is same toRouter LAN IP address. In some
cases, you could also leave it blank or type in 8.8.8.8.
About Us
Press
Partners
Corporate Profile
News
Contact Us
Awards
Training Center
Careers at TP-LINK
Privacy Policy