Documente Academic
Documente Profesional
Documente Cultură
Congratulations on your new set of Union Bindings! Union Bindings are the highestperforming, best-fitting bindings money can buy.
Bindings are the most important piece of snowboarding equipment you own. That being said, its crucial
that they are set up properly to ensure optimal fit and performance. This guide will give you all the info
you need to dial in the proper boot-in-binding fit.
If this is your first time setting up a snowboard, we highly suggest going into an Authorized Union Dealer
for assistance. Your stance is something that you can set up in 5 minutes but it may take you 5 years to
perfect.
Remember, there is no right or wrong, so experiment with it and find what works for you.
Warning: Snowboarding is a hazardous sport which can result in serious injury or, in certain circumstances, death. Snowboard bindings by design do not release upon impact. Make sure all of your
hardware is tight before each use, you ride within your ability level, and you abide by the mountain
responsibility code. By using this equipment, all risk is assumed by you.
01
STRONGER.
HAVE A
GREAT
WINTER
EVOLUTION: YEAR ELEVEN
UNIONBINDINGCOMPANY.COM
02
STRONGER.
TOOLS NEEDED
1 - #3 Phillips Screwdriver
2 - Tape Measure
03
STRONGER.
WARNING!
Application of Loc-Tite is not recommended by Union Binding Company. The use of Loc-Tite or similar
products could result in stress cracks and fractures on all thermo plastics. If you are having issues with
loose mounting hardware please contact your local authorized Union dealer.
04
STRONGER.
STANCE
WIDTH
05
STRONGER.
BINDING
ANGLES
06
STRONGER.
07
STRONGER.
Mini Disk (4X2 Pattern + Channel Compatibility): In order to mount the Ultra, Contact Pro or Legacy we
have found that its best to use the following technique . First , align your disk with the boards inserts
that you plan on using.If youre using the Channel you will only need to use two washers and two screws
to mount each binding.If you are using a traditional 4X4 mounting system be sure to use all four washers
and screws. Begin by threading one screw with NO washer . This will pull the binding closer to the top
sheet and allow you to easily thread the remaining screws and washers. Once you have threaded the
remaining screws take out the first screw and rethread the first screw WITH a washer. Hardware should
be hand tightened using a #3 Phillips Screwdriver.
08
STRONGER.
09
STRONGER.
10
STRONGER.
11
STRONGER.
12
STRONGER.
13
STRONGER.
14
STRONGER.
UP
DOWN
15
STRONGER.
16
STRONGER.
17
STRONGER.
18
STRONGER.
19
STRONGER.
INTERNATIONAL
PRO TEAM
KOKUBO
ZIMA
BRISSE
RICE
HORGMO
IGUCHI
CRAVEN
RUF
KASS
STEVENS
JACQUES
JONES
COCARD
KIMURA
SCHAER
EVOLUTION: YEAR ELEVEN
UNIONBINDINGCOMPANY.COM
20
STRONGER.
CONTACT US
Have a question about sizing? Want to know what binding would work best for your riding style? Need
help with a warranty? Just want to chat with someone about snowboarding? Were here to help!
Shoot us an e-mail or give us a call.
http://www.unionbindingcompany.com/warranty-request-form
http://www.unionbindingcompany.com/info-distribution
@UnionBindingCo #UnionBindings
@Unionbindings #UnionBindings
http://www.facebook.com/UnionBindingCompany
21
STRONGER.
USA
C3 WORLDWIDE
CANADA
NO LIMITS
JAPAN
CUSTOM PRODUCE INC.
PH 86 10 63549883
FX 86 10 63549883
info@c3-worldwide.com
warranty@c3ww.com
c3-shop.com
customercare@nolimits.ca
nolimits.ca
home@customproduce.com
customproduce.com
colinw@gdrsport.com
EUROPE
CORE SRL
KOREA
GMP SPORTS
Via Madriasco 5
Localita Tavani
23014 Delebio (SO)
Italy
14 Baines Crescent
Torquay, Victoria 3228
Australia
PH +39-0342-683-494
FX +39-0342-696-496
PH 82 2 557 6580
FX 82 70 8610 6581
Info@unionbindingcompany.it
info@principledistribution.com.au
principledistribution.com.au
info@theriderslounge.com
theriderslounge.com
info@theriderslounge.com
theriderslounge.com
CHINA
BEIJING GDRSPORT
TRADING LTD
5-10, BaiZhiFang
XuanWu
Beijing, China
22 BACK COVER
STRONGER.
INSTALLATION MANUAL
23 COVER
STRONGER.