Documente Academic
Documente Profesional
Documente Cultură
FRIEDRICHSHAFEN
Installation Procedure
MTU Dialog Software DiaSys 2.70
Introduction............................................................................................................2
Installation..............................................................................................................2
2.1
Installation for Windows 7..............................................................................2
2.1.1
Reinstall or Update an Earlier DiaSys Program Version........................3
2.1.2
Install a New Program Version from Local CD-Drive..............................3
2.1.3
Installation of the IXXAT VCI driver VCI 3.5.1 / VCI 2.20.......................4
2.1.4
Test of IXXAT CAN interface....................................................................4
2.1.5
Access rights...........................................................................................4
3 Uninstallation of IXXAT VCI driver.........................................................................4
Dok. Name
311676482.doc
Version
2.70 E
nd. Datum
04.06.2014
Erst. Datum
08.11.2013
Status
done
Ersteller
Meier
MTU
FRIEDRICHSHAFEN
Installation Procedure
MTU Dialog Software DiaSys 2.70
Introduction
This document explains the installation of MTUs dialogue software DiaSys version
2.70. DiaSys program of version 2.70 is a 32-bit-program for Microsoft Windows 7.
DiaSys program version 2.70 enables you
to modify settings of a MTU electronic engine controller
to record data from a MTU electronic engine controller and
to analyse this data.
DiaSys program can communicate by an optional CAN interface with MTUs MCS
ship monitoring system, MTUs RCS ship control system and ECU-7/-8/-9 controller.
Installation
2.1
Dok. Name
311676482.doc
Version
2.70 E
nd. Datum
04.06.2014
Erst. Datum
08.11.2013
Status
done
Ersteller
Meier
MTU
FRIEDRICHSHAFEN
Installation Procedure
MTU Dialog Software DiaSys 2.70
What to do?
Start computer. Login as local administrator.
Terminate all programs.
Unplug hardware key and IXXAT CAN interfaces.
Hints
2)
3)
4)
5)
Dok. Name
311676482.doc
Version
2.70 E
nd. Datum
04.06.2014
Erst. Datum
08.11.2013
Status
done
Ersteller
Meier
MTU
FRIEDRICHSHAFEN
Installation Procedure
MTU Dialog Software DiaSys 2.70
2.1.3 Installation of the IXXAT VCI driver VCI 3.5.2 / VCI 2.20
for the IXXAT interfaces:
1) The installation is described in C:\DIASYS\CAN\IXXAT\can_readme.txt.
Please read this file before you plug in a CAN interface.
2) Start installation as described in C:\DIASYS\CAN\IXXAT\can_readme.txt.
3) Select in 'Start - Control Panel - IXXAT Interfaces the used CAN interface and
press Default HW.
Dok. Name
311676482.doc
Version
2.70 E
nd. Datum
04.06.2014
Erst. Datum
08.11.2013
Status
done
Ersteller
Meier