Sunteți pe pagina 1din 4

Alcatel-Lucent 7450 Ethernet Service Switch

1 0 G i g E M edia D ependent A dapter with tunable optics

The Alcatel-Lucent 10GigE Media Dependent Adapter (MDA) with tunable optics enables software selection
of wavelengths when interconnecting the Alcatel-Lucent 7450 Ethernet Service Switch (ESS) with DWDM
transport equipment. It enables the MPLS-enabled Carrier Ethernet platform to interconnect directly with DWDM
systems, eliminating the need for external optical transponder shelves and reducing the complexity of sparing
and configuration, which directly results in CapEx and OpEx savings for service providers, cable MSOs, mobile
operators, Internet service providers, application service providers, and industry and public sector (IPS) customers.
Initial configuration and implementation of configuration changes within the transport network are also greatly
simplified. When deployed in conjunction with Alcatel-Lucent metro optical transport equipment, innovative
Wavelength Tracker technology would enable end-to-end tracking of the identity and optical power of
DWDM wavelengths, with the ability to adjust and balance optical power at each point in the transport network.

Features
Configurable wavelengths span the
C-Band, software configurable in
50 GHz increments, representing a
total of 89 different wavelengths
Standards compliant G.709 (OTU-2)
Forward Error Correction (FEC)
7450 ESS 10GigE Tunable DWDM MDA

Enhanced FEC (EFEC) algorithms


extend optical reach for long-haul
applications
Framing options include LAN PHY
and WAN PHY modes, with or
without OTU-2 and FEC/EFEC
Synchronous Ethernet (Sync-E)
Timing option
Comprehensive Ethernet support
including IEEE 802.1p/Q VLAN
tagging, IEEE 802.1ad, IEEE 802.1ah,
and IEEE 802.3x flow control
Ethernet service OAM capabilities
including IEEE 802.3ah, IEEE 802.1ag
and ITU-T Y.1731

ITU-T G.709 OA&M Support, including


alarm indication signal (AIS), forward
defect indication (FDI), open connec
tion indication (OCI), and payload
missing indication (PMI)
Comprehensive OTU statistics and
show commands, including Severely
Errored Seconds (SES), Errored
Seconds (ES), corrected bits and
uncorrectable sub-rows
Fully managed by Alcatel-Lucent
5620 Service Aware Manager (SAM)
Innovative Alcatel-Lucent
Wavelength Tracker functionality
enables end-to-end tracking and
adjustment of optical power
and signal amplitude across the
transport network
Up to 20 10GigE Tunable DWDM
MDAs supported on the 7450 ESS
(up to 60 per rack)
Hot-swappable removal and insertion

Benefits

Simplifies initial configuration and


implementation of changes

Allows the 7450 ESS to be interconnected directly to existing


DWDM systems

Reduces the cost and overhead of


maintaining spares for disparate
wavelengths at each location

Eliminates the need for external


transponders, reducing cost and
complexity

Used in transport of 10GigE across


optical transport infrastructure,
reaching at least 80 km without
requiring optical signal amplification
or dispersion compensation

Provides operators with increased


flexibility and efficiency in the use
of DWDM wavelengths

For long-haul applications, EFEC


provides additional coding gain to
extend optical transport distances
up to 2000 km dependent on fiber
conditions and amplification
When used in conjunction with
Alcatel-Lucent transport equipment,
Wavelength Tracker provides a
powerful tool for streamlining endto-end monitoring and adjustment
of signal integrity across the network

Figure 1. Typical applications of 10GigE MDA with tunable optics

DWDM metro ring


7450 ESS

ROADM

7450 ESS

OXC

Remote site

ROADM

10GigE tunable optics module


7450 ESS

Figure 2. Incorporation of tunable optics in comparison to traditional implementations

Traditional
implementation

Ethernet

Optical

7450 ESS

Long-haul optical

Optical

ROADM

Ethernet

7450 ESS

ROADM
Transponders

Implementation with
tunable optics

Transponders

Ethernet

Optical

7450 ESS

Long-haul optical

ROADM
ROADM

Tunable DWDM interface (integrated transponders)

Optical

Alcatel-Lucent 7450 ESS 10GigE MDA | Data Sheet

Ethernet

7450 ESS

Technical specifications
Minimum operating system
software
Release 7
All features listed are hardware
capable; some software features
are release dependent

Slot requirements
Two MDAs with tunable optics
(DWDM TUN) per IOM

Hardware compatibility
IOM-3-XP
IOM 20G
7450 ESS-1
Hardware support for Wavelength
Tracker on the 7450 ESS-6,
7450 ESS-7 and 7450 ESS-12

Indicators
LEDs for status, power, WAN PHY
mode and Laser Disable

Connectorization
Duplex LC fiber connector

Interfaces
Software-selectable LAN PHY
and WAN PHY
10GBASE-R LAN PHY mode
10GBASE-W WAN PHY mode

Framing options
OTU-2
LAN (11.049 Gb/s and 11.096 Gb/s,
10.3125 Gb/s base rate without
OTU-2)
WAN (10.709 Gb/s and 9.95 Gb/s,
9.95 Gb/s base rate without
OTU-2)

Physical dimensions

Safety

Telecom

Height: 3.56 cm (1.4 in.)


Width: 19.0 cm (7.5 in.)
Depth: 17.8 cm (7.0 in.)
Weight: 0.45 kg (1.0 lb)

EN 60950-1 (Class 1 laser)


IEC 60950-1 CB Scheme
CSA/UL 60950-1 NRTL
FDA CDRH 21-CFR 1040
EN 60825-1
EN 60825-2
IEC 60825-1
IEC 60825-2

Telcordia GR-253-CORE, Issue 3


IEEE 802.3 (GigE, Ethernet)
ANSI T1.105
ANSI T1.105.03
ANSI T1.105.06
ANSI T1.105.09
ANSI T1.403 (DS1)
ANSI T1.404 (DS3)
ITU-T G.703
ITU-T G.707
ITU-T G.709
ITU-T G.813
ITU-T G.823
ITU-T G.824
ITU-T G.825
ITU-T G.957

Environmental specifications
Operating temperature: 0C to
40C (32F to 104F)
Relative humidity: 15% to 85%
(non-condensing)
Operating altitude: 3048 m
(10,000 ft)

Network/Element management
Fully supported by Alcatel-Lucent
5620 Service Aware Manager (SAM)
Command Line Interface

Optical DDM compliance


SFF-8472

Synchronous Ethernet (Sync-E)


standards support
ITU-T G.8261 g.pactiming
Timing and synchronization
aspects of packet networks
ITU-T G.8262 g.paclock
Timing characteristics of Ethernet
equipment slave clock (EEC)
ITU-T G.8263 g.paclock.bis
Synchronous status messaging
(SSM) echo support
ITU-T G.8264 g.pacmod
Distribution of timing through
packet networks

EMC
ICES-003 Class A
FCC Part 15 Class A
EN 300 386
EN 55022
EN 55024
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-11
IEC CISPR 22
AS/NZS CISPR 22

Environmental
ETS 300 019-1-1, Storage Tests,
Class 1.2
ETS 300 019-1-2, Transportation
Tests, Class 2.3
ETS 300 019-1-3, Operational
Tests, Class 3.2
ETS 300 019-2-4, pr A 1 Seismic

Immunity
EN 61000-3-2 Power Line
Harmonics
EN 61000-3-3 Voltage Fluctuations
and Flicker
EN 61000-4-2 ESD
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT
EN 61000-4-5 Surge
EN 61000-4-6 Low Frequency
Common Immunity
EN 61000-4-11 Voltage Dips
and Sags

Electronic equipment directives


WEEE
RoHS
R&TTE
China-CRoHS

Certifications
NEBS Level 3:
Telcordia GR-1089-CORE,
Issue 4, June 2006
Telcordia GR-63-CORE, Issue 3,
March 2006
ATT-TP-76200
CE

Alcatel-Lucent 7450 ESS 10GigE MDA | Data Sheet

Table 1. Alcatel-Lucent 7450 ESS 10GigE MDA ordering information


Part Number

Part Name

Description

3HE04181AA

1-port 10GigE MDA with tunable optics

MDA 7450 ESS 10G TUN ZW/R

Table 2. Optical specifications


Transmitter

Transmitter optical range

1528.77 to 1563.86 nm 89 channels on 50 GHz ITU grid (191.7 to 196.1 THz)

Optical output power (standard mode)

+1 to +5 dBm (nominal without additional power control)

Optical output power (in active power


control mode)

0 to -15 dBm (power can be set to any value within this range within 0.01 dB)
0.01 dB (power setting resolution)
+/- 0.5 dB (power control accuracy over life and temperature)

Path penalty

2 dB (at 1440 ps/nm)

Receiver

Receive power sensitivity

-24 dBm (BER 10^-12)

Receive power overload

-7 dBm (BER 10^-12)

Optical return loss

27 dB

Dispersion tolerance

0 to +1440 ps/nm (up to 2000 km transmission dependent upon amplified and dispersion compensated fiber
transport layer specifications)

Receive optical range

1290 nm to 1610 nm

OSNR tolerance*

19 dB (preFEC BER 10^-12 @ 0.1 nm / Rx power -8 to -20 dBm)


15 dB (preFEC BER 10^-5 @ 0.1 nm / Rx power -8 to -22 dBm)

FEC gain

6.2 dB (G.709 standard gain)


>8 dB (EFEC enhanced gain)

FEC BER

<10^-15 (post-FEC BER when operating within FEC correction limits)

*preFEC BER OSNR tolerance values listed are based on FEC mode card operation

www.alcatel-lucent.com

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo


are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility
for inaccuracies contained herein. Copyright 2009 Alcatel-Lucent. All rights reserved.
CPG2896090812 (12)

S-ar putea să vă placă și