0 evaluări0% au considerat acest document util (0 voturi)
77 vizualizări1 pagină
Red Valve's Series DX Slurry Knife Gate Valve is the most durable and userfriendly knife gate valve for di cult slurry applications. The valve's reinforced elastomer sleeves seal against each other and provide a 100% full-port opening. A wiper blade mounted on top of the valve prevents the gate lubricant and process from leaking through the top.
Red Valve's Series DX Slurry Knife Gate Valve is the most durable and userfriendly knife gate valve for di cult slurry applications. The valve's reinforced elastomer sleeves seal against each other and provide a 100% full-port opening. A wiper blade mounted on top of the valve prevents the gate lubricant and process from leaking through the top.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
Red Valve's Series DX Slurry Knife Gate Valve is the most durable and userfriendly knife gate valve for di cult slurry applications. The valve's reinforced elastomer sleeves seal against each other and provide a 100% full-port opening. A wiper blade mounted on top of the valve prevents the gate lubricant and process from leaking through the top.
Drepturi de autor:
Attribution Non-Commercial (BY-NC)
Formate disponibile
Descărcați ca PDF, TXT sau citiți online pe Scribd
100% full-port design Eliminates need for packing Abrasion resistant slurry sleeves Bi-directional, drop-tight shut-off Eliminates seat cavity which prevents slurry build-up or dewatering
Red Valve’s Series DX Slurry Knife Gate Valve is the most durable and userfriendly knife gate valve for difficult slurry applications.
Extensive in-house testing and proprietary formulation of elastomers allows
Red Valve to guarantee our sleeves against fatigue or loss of compression for 50,000 cycles!When open, the DX Valve’s reinforced elastomer sleeves seal against each other and provide a 100% full-port opening which minimizes turbulence and wear. In this open position, the seats isolate and protect all metal parts of the valve from coming in contact with the process. When closed, the sleeves provide a drop-tight seal in both directions. Extensive in-house testing and proprietary formulation of elastomers allows Red Valve Each time the DX Valve strokes, it discharges a small amount of slurry, which to guarantee our sleeves against fatigue or keeps the gate path and seat area clear of entrapped particulates. Unlike loss of compression for 50,000 cycles! traditional knife gate valves, the DX prevents slurry build-up in the seat area, which might otherwise prohibit the valve’ s ability close. Both the slurry sleeves and gate are field replaceable. Materials of Construction A wiper blade mounted on top of the valve prevents the gate lubricant and Body: ductile iron (standard, DN80-DN600), process from leaking through the top. The DX Valve design eliminates the fabricated steel (DN650-DN900) Sleeves: Pure Gum Rubber, Neoprene, Hypalon, need for traditional packing. This wiper blade also prevents external grit from Chlorobutyl, Buna-N, EPDM, Viton entering the valve body. Gate: 316L S.S. (standard), 17-4PH, 317L, 904L, duplex, alloy 20 and C-276, To control slurry discharging from slot in the valve, a plate style splash Optional proprietary gate coatings: PTFE, PFA and FEP guard is utilized. Optional systems to pipe or flush the slurry away are also Optional splash guard and pipe-a-way containment available.
Length FTF [mm]
without with Closed Open DN valve size retaining retaining C [mm] H [mm] flanges flanges 80 3’’ 149 175 435 518 100 4’’ 149 175 464 575 150 6’’ 152 178 535 690 200 8’’ 159 184 675 878 250 10’’ 225 824 1108 300 12’’ 257 940 1292 350 14” 257 1108 1464 400 16’’ 279 1207 1600 450 18” 308 1337 1778 500 20” 359 1472 1883 Retaining rings are optional in valve sizes DN80 - DN200 and standard in sizes DN250 600 24’’ 371 1694 2208 and larger. DN900 and DN1050 available upon request 750 30’’ 400 2251 3064