Documente Academic
Documente Profesional
Documente Cultură
JOHNSON SCREENS
STAINLESS STEEL
WELL SCREENS
AND ACCESSORIES
STAINLESS STEEL
WATER WELL SCREENS
Bilfinger Water Technologies brand of Johnson Screens products are one of the largest
manufacturers of stainless steel water well screens in the world. With a high open area, allowing for
better access to the entire formation around the screen; fines and drilling fluid are removed quickly and
completely, resulting in a better well development.
LESS MAINTENANCE
The continuous Vee-Wire slot design allows for lower entrance velocity of the water, reducing
encrustation rates. The slot design also resists plugging and prevents sand from damaging
pumps.
PUMPING COSTS
The high open area of the Vee-Wire well screen allows for water to enter the well freely,
resulting in minimal drawdown and less energy usage by a pump.
SAND CONTROL
The water well screen is a key component of the sand control system, either as an integral
component of the gravel pack, or as a standalone provider of sand control. Patented Vee-Wire
technology and welded construction, help to prevent well screen failure by better controlling
the sand.
Size (in.)
ID
(in.)
Screen Weight1
(lbs./ft.)
Max Depth
(ft.)
Tensile Strength2
(lbs.)
Column
Strength 3
(lbs.)
5,800
1.25
1.7
1.0
2.0
1,000
5,500
2P
2.4
1.7
2.7
1,000
7,200
8,700
2P Sand Point
2.6
2.0
2.5
1,000
4,900
4,200
3P All Drive
3.7
3.0
4.4
1,000
12,700
13,400
4P All Drive
4.7
4.0
5.6
600
16,300
21,400
4P - Double
Drive
4.8
4.0
7.0
1,000
16,300
21,400
Size
(in.)
1.25
6
5.8
10
9.1
12
10.6
15
12.7
20
15.9
30
21.2
6
6,155
10
5,804
12
15
5,642 5,417
20
5,078
30
4,514
2P
8.2
12.8
15.0
17.9
22.4
29.9
2,349
2,215
2,153 2,067
1,938
1,722
2P Sand
Point
8.9
14.0
16.3
19.6
24.5
32.6
1,825
1,721
1,673 1,606
1,506
1,338
3P All Drive
12.6
19.7
23.0
27.6
34.5
46.1
638
620
603
579
543
483
4P All Drive
16.0
25.2
29.4
35.3
44.1
58.8
318
300
291
280
262
233
4P - Double
Drive
11.3
18.1
21.3
25.9
32.9
45.2
835
801
785
763
728
667
OD
(in.)
ID
(in.)
1.25
1.7
1.0
1.7
600
5,500
Column
Strength 3
(lbs.)
5,800
2P
2.4
1.7
2.3
600
7,200
8,700
2P Sand Point
2.6
2.0
2.0
600
4,900
4,200
4P All Drive
4.6
4.0
4.8
250
16,300
21,400
Size
(in.)
Drive Point
1.25
6
4.0
10
6.4
12
7.6
15
9.2
20
11.7
30
16.1
6
10
2,496 2,396
12
2,348
15
2,280
20
2,176
30
1,993
2P
5.7
9.1
10.7
12.9
16.5
22.6
857
2P Sand
Point
822
806
782
747
684
5.9
9.5
11.1
13.5
17.2
23.7
743
713
699
679
648
594
20.7
25.2
32.0
44.0
118
113
111
108
103
94
Centralizer
Wirelock Fittings
Figure TF Washdown
Drive Point
END FITTING
AND SCREEN
CONNECTION
OPTIONS
THE MAJORITY OF WELL SCREEN
INSTALLATIONS INVOLVE AT
LEAST A FEW STANDARD
FITTING COMBINATIONS.
Telescope size screens typically use a Figure K
packer on the screen top and a welded or threaded
plate bottom. Pipe size screens attach directly to
the casing and usually have plate bottoms.
Wash Plugs
Shale Trap
Figure K Packer
- Threaded point
- Threaded cap/plugs
- Locking caps
- Bail hooks
- Weld ring x weld ring
- Weld ring x collar
- PVC to stainless steel adapter
- Quickloc
- Shur-A-Lock
Di-Electric Coupling
Flush Thread
- ShurGrip
SMALL DIAMETER
STAINLESS STEEL WELL SCREENS
WATER WELL AND ENVIRONMENTAL SCREENS
60 WIRE CONSTRUCTION 304 AND 316 STAINLESS STEEL
NOTES:
- Transmitting capacity (gpm/ft. of screen) =
open area x 0.31 @ 0.1 ft./.sec
- P - pipe size, T - telescope
Size
(in.)
OD
(in.)
ID
(in.)
Screen
Weight1
(lbs./ft.)
Max Depth
(ft.)
Tensile
Strength2
(lbs.)
Recom. Hang
Weight 3 (lbs.)
Column
Strength 4
(lbs.)
1.25
1.7
1.1
1.8
1,000
4,200
2,100
3,100
2P*
2.5
1.99**
1.9
1,000
2,000
1,000
1,500
2P/3T
2.6
2.0
2.2
1,000
3,400
1,700
2,600
2.5P
3.0
2.4
2.6
1,000
4,200
2,100
3,100
3P*
3.6
2.9
2.9
1,000
4,200
2,100
3,100
3P/4T
3.7
3.1
3.0
1,000
4,200
2,100
3,100
4P*
4.6
4.0**
3.7
600
4,800
2,400
3,700
4P/5T
4.7
4.1
3.8
600
4,800
2,400
3,700
5P/6T
5.6
5.0
4.5
400
5,600
2,800
4,200
Size
(in.)
10
1.25
6.9
9.4
2P*
9.7
2P/3T 10.1
2.5P
11.9
1,083
975
867
780
709
3P*
14.0
60.8
713
682
663
597
531
478
434
3P/4T 14.5
63.2
635
608
591
532
473
426
387
4P*
12
20
30
40
50
10
12
20
30
50
17.9
78.0
340
326
317
285
253
228
207
4P/5T 18.6
80.7
307
294
286
257
229
206
187
5P/6T 22.1
96.1
182
174
170
153
136
122
111
40
Screen
Weight1
(lbs/ft.)
Max
Depth
(ft.)
Tensile
Strength2
(lbs.)
Recom.
Hang
Weight 3
(lbs.)
Column
Strength 4
(lbs.)
1.7
1.1
1.5
600
4,200
2,100
3,100
2.4
1.99**
1.5
600
2,000
1,000
1,500
2P/3T
2.5
2.0
1.7
600
3,400
1,700
2,600
2.5P
3.0
2.4
2.1
600
4,200
2,100
3,100
3P*
3.5
2.9
2.3
600
4,200
2,100
3,100
3P/4T
3.7
3.1
2.4
600
4,200
2,100
3,100
4P*
4.5
4.0**
2.9
250
4,800
2,400
3,700
4P/5T
4.7
4.1
3.0
250
4,800
2,400
3,700
5P/6T
5.6
5.0
3.5
100
5,600
2,800
4,200
Size
(in.)
OD:
(in.)
1.25
2P*
Size
(in.)
10
12
1.25
4.6
6.4
7.6
20
30
11.7 16.1
40
50
10
12
20
30
40
50
1,743 1,618
2P*
6.6
9.2
28.2 32.7
817
792
776
719
659
608
564
2P/3T
6.9
9.6
29.3 34.0
724
702
688
637
585
538
500
2.5P
8.1
34.6 40.1
443
429
421
390
357
330
306
3P*
9.6
40.9 47.5
269
261
255
237
217
200
186
3P/4T
42.6 49.4
239
232
227
211
193
178
165
4P*
52.6 61.0
127
123
121
112
102
94
88
4P/5T
54.5 63.2
114
111
109
101
92
85
79
5P/6T
65.0 75.4
67
65
64
59
54
50
47
NOTES:
- Transmitting capacity (gpm/ft. of screen) =
open area x 0.31 @ 0.1 ft./.sec
- P - pipe size, T - telescope
Recom.
Collapse
Weight1
Hang
Strength1
2
(lbs./ft.) Weight
(PSI)
(lbs.)
87
4,300
4.4
194
4,300
4.8
185
8,800
6.0
677
8,800
7.6
20
30
40
50
60
80
100
35
20
20
16
61
37
37
30
82
51
52
43
98
64
65
54
6P
100
250
600
1,000
6.5
6.6
6.7
6.8
6.0
6.0
5.9
5.9
8T
250
1,000
7.6
7.7
6.7
6.7
7.0
8.9
11.000
11,000
127
468
23
18
42
34
59
48
73
61
86
73
98
83
8P
250
1,000
8.7
8.8
7.9
7.9
7.9
10.1
12,100
20,800
85
314
26
21
48
39
67
55
84
70
99
83
10 T
250
1,000
9.5
9.6
8.6
8.6
8.3
10.7
12,100
12,100
65
242
28
23
53
43
74
60
92
76
10 P
600
1,000
10.8
10.8
9.8
9.8
12.6
17.8
15,400
15,400
170
226
25
25
48
48
68
68
86
86
12 T
600
1,000
11.4
11.4
10.4
10.4
13.6
19.0
17,600
17,600
145
192
27
27
51
51
72
72
90
90
12 P
250
600
1,000
12.8
12.8
12.9
11.8
11.8
11.8
14.8
20.9
25.2
17.600
17,600
17,600
103
136
193
30
30
29
57
57
55
80
80
78
14 T
250
600
1,000
12.6
12.6
12.6
11.6
11.6
11.6
13.6
19.6
24.0
14,300
14,300
14,300
108
143
207
30
30
28
56
56
53
79
79
76
14P/
16 T
250
600
1,000
14.1
14.1
14.1
13.1
13.1
13.1
15.5
22.2
27.2
17,100
17,100
17,100
77
102
148
33
33
32
63
63
60
89
89
85
1.
2.
3.
Based on 0.030 in. slot size (collapse values contain no safety factor)
Recommended hang weight is 50 percent of the calculated tensile strength
Transmitting capacity in gpm/ft. of screen = open area x 0.31 @ 0.1 ft./sec.
117 133
101 116
10
20
30
40
50
60
80
100
16 P/
18 T
100
250
600
1,000
16.1
16.1
16.1
16.1
15.0
15.0
15.0
14.8
17.7
25.4
31.1
39.5
19,300
19,300
19,300
43,800
52
69
99
168
38
38
36
40
71
71
68
75
101
101
97
106
128
128
123
133
152
152
146
158
173
173
167
180
211
211
204
219
243
243
235
251
18 P/
20 T
100
250
600
1,000
17.9
17.9
18.0
18.0
16.7
16.7
16.7
16.7
19.3
34.0
35.8
42.7
19,800
19,800
19,800
37,100
38
72
120
120
42
40
45
45
79
76
84
84
112
108
118
118
142
136
149
149
169
162
177
177
193
186
202
202
235
227
245
245
270
262
280
280
20 P
100
250
600
1,000
19.9
20.0
20.1
20.1
18.8
18.8
18.8
18.8
21.8
38.1
40.3
48.3
23,100
23,100
23,100
43,300
27
52
87
87
47
45
50
50
88
85
94
94
125
120
132
132
158
152
167
167
188
181
197
197
214
208
225
225
261
253
273
273
300
292
313
313
24 T
100
250
600
1,000
21.9
21.9
22.0
22.2
20.7
20.7
20.7
20.7
34.6
42.2
44.4
66.7
26,400
26,400
26,400
49,500
27
40
66
145
52 97 138
49 93 132
55 102 145
42 80 114
174
167
182
146
206
198
216
174
236
227
246
201
287
278
299
248
330
320
343
289
24 P/
26 T
100
250
1,000
24.1 22.8
24.2 22.8
24.4 22.8
44.8
46.9
69.0
22,000
22,000
41,200
30
50
110
218
238
192
250
271
221
305
329
273
352
377
317
26 P
100
250
1,000
25.7 24.4
25.8 24.4
26.0 24.4
47.5
50.0
73.7
23,700
23,700
44,300
25
41
91
233
253
204
267
289
235
326
351
290
376
402
338
30 T
100
250
1,000
27.0 25.8
27.1 25.8
27.3 25.8
49.7
52.3
73.7
23,700
23,700
44,300
21
35
78
245
266
214
280
303
247
342
368
305
395
422
355
30 P/
36 T
100
250
1,000
29.6 28.3
29.7 28.3
29.9 28.3
54.8
57.6
8 4.9
27,500
27,500
51,600
16
27
60
268
292
235
307
333
271
375
403
334
433
463
389
36 P
100
600
35.7 34.3
35.9 34.3
68.9
101.2
31,900
59,800
16
35
350
282
400
325
485
401
556
467
1.
2.
3.
NOTES:
- Screens are available in up to
40 ft. lengths of continuously
wrapped screen with no
mid-weld
- 316 stainless steel screen.
Technical information is
available upon request
- P - pipe size, T - telescope
- For application depths >
1, 000 ft., contact Technical
Support
Based on 0.030 in. slot size (collapse values contain no safety factor)
Recommended hang weight is 50 percent of the calculated tensile strength
Transmitting capacity in gpm/ft. of screen = open area x 0.31 @ 0.1 ft./sec.
NOTES:
- Screens are available in up to 40 ft.
lengths of continuously wrapped screen
with no mid-weld
- 316 stainless steel screen technical
information is available upon request
- On average, Hi-Flow screens have a 30
percent higher open area
- P - pipe size, T - telescope
- For application depths > 1, 000 ft.,
contact Technical Support
Recom.
Collapse
Max
Size
OD ID Weight1 Hang
Strength1
Depth
2
(in.)
(in.) (in.) (lbs./ft.) Weight
(PSI)
(ft.)
(lbs.)
87
4,300
4.4
6.5 6.0
100
252
4,300
6.3
6.6 6.0
250
6P
241
8,800
7.5
6.7 5.9
600
241
8,800
7.5
1,000 6.7 5.9
20
30
40
50
60
80
100
35
25
26
26
61
46
46
46
82
63
64
64
98
77
78
78
111
90
91
91
123
100
102
102
140
118
120
120
153
132
134
134
8T
100
600
1,000
7.5
7.5
7.6
6.7
6.7
6.7
6.6
8.7
10.4
11,000
11,000
11,000
57
172
353
40
29
35
71
52
63
94
71
85
113
88
103
129 141
102 114
118 131
162
134
152
177
150
168
8P
250
1,000
8.7
8.7
7.9
7.9
9.8
11.8
12,100
12,100
110
236
33
40
60
72
83
97
102
118
118 132
136 150
155
174
174
192
10 T
250
1,000
9.5
9.5
8.6
8.6
10.5
12.6
12,100
12,100
85
181
36
44
66
79
90
106
111
129
129 144
148 164
170
190
189
209
10 P
250
1,000
10.8
10.9
9.8
9.8
14.6
21.0
15,400
15,400
124
341
50
29
89
55
121
77
147
97
168 186
114 130
216
157
238
179
12 T
250
1,000
11.3 10.4
11.4 10.4
15.8
22.5
17,600
17,600
108
298
53
31
94
57
127
81
154
101
176 195
119 136
226
164
249
187
12 P
250
1,000
12.8 11.8
12.9 11.8
17.2
24.7
17,600
17,600
74
206
60 106 143
35 65 91
174
114
199 221
135 154
256
185
282
211
14 T
250
1,000
12.5 11.6
12.6 11.6
16.0
23.4
14,300
14,300
80
221
58 104 140
34 63 89
170
112
195 216
132 150
250
181
276
207
14 P/
16 T
250
1,000
14.0 13.1
14.1 13.1
18.2
26.5
17,100
17,100
57
158
65 116 157
38 71 100
190
125
218 242
148 168
280
202
309
231
1.
2.
3.
Based on 0.030 in. slot size (collapse values contain no safety factor)
Recommended hang weight is 50 percent of the calculated tensile strength
Transmitting capacity in gpm./ft. of screen = open area x 0.31
@ 0.1 ft./sec.
Collapse
Strength1
(PSI)
10
20
40
50
60
80
100
37
106
162
75
43
40
251
169
160
278 322
192 231
183 221
355
264
254
18 P/
20 T
600
1,000
17.9 16.7
18.0 16.7
33.4
42.7
19,800
37,100
78
120
48
45
90
84
127 159
118 149
187
177
213 257
202 245
293
280
20 P
250
600
1,000
20.0 18.8
20.1 18.8
20.1 18.8
37.5
40.1
53.6
23,100
23,100
43,300
56
87
128
54
50
54
209
197
210
238 287
225 273
239 289
328
313
329
24 T
250
600
1,000
21.9 20.7
22.0 20.7
22.2 20.7
41.2
44.4
66.7
26,400
26,400
49,500
42
66
145
59
55
42
229
216
174
261 315
246 299
201 248
359
343
289
24 P/
26 T
100
250
1,000
24.1 22.8
24.2 22.8
24.4 22.8
43.5
46.9
69.0
22,000
22,000
41,200
32
50
110
65
60
46
252
238
192
287 346
271 329
221 273
395
377
317
26 P
100
250
1,000
25.7 24.4
25.8 24.4
26.0 24.4
46.4
50.0
73.7
23,700
23,700
44,300
26
41
91
69
64
49
269
253
204
306 369
289 351
235 290
421
402
338
30 T
100
250
1,000
27.0 25.8
27.1 25.8
27.3 25.8
48.5
52.3
76.7
23,700
23,700
44,300
23
35
78
73
67
51
283
266
214
321 388
303 368
247 305
443
422
355
30 P/
36 T
100
250
1,000
29.6 28.3
29.7 28.3
29.9 28.3
53.5
57.6
84.9
27,500
27,500
51,600
17
27
60
80
74
56
310
292
235
352 425
333 403
271 334
485
463
389
36 P
100
250
600
35.7 34.3
35.8 34.3
35.9 34.3
68.9
89.7
101.2
31,900
59,800
59,800
16
23
35
89
96
68
350
375
282
400 485
426 514
325 401
556
587
467
1.
2.
3.
NOTES:
- Screens are available in up to 40 ft.
lengths of continuously wrapped
screen with no mid-weld
- 316 stainless steel screen. Technical
information is available upon request
- On average, Hi-Flow screens have a 30
percent higher open area
- P - pipe size, T - telescope
- For application depths > 1, 000 ft.,
contact Technical Support
Based on 0.030 in. slot size (collapse values contain no safety factor)
Recommended hang weight is 50 percent of the calculated tensile strength
Transmitting capacity in gpm/ft of screen = open area x 0.31 @ 0.1 ft./sec.
Recom.
Hang
Weight 2 :
(lbs.)
Collapse
Strength1
(PSI)
40
50
60
80
100
6P
250
1,000
6.6
6.9
6.0
5.9
6.3
15.5
5,100
14,500
266
1,855
63
30
77
39
90
47
100
54
118
67
132
79
8T
250
1,000
7.5
7.7
6.7
6.7
8.7
17.9
12,900
18,100
182
1,340
71
34
88
43
102 114
52 60
134
75
150
88
8P
250
1,000
8.7
8.9
7.9
7.9
9.9
20.3
14,100
19,900
117
871
83
39
155
87
174
102
10 T
250
1,000
9.5
9.7
8.6
8.6
11.1
22.6
16,700
23,600
90
674
90
42
170
95
189
111
10 P
250
600
1,000
10.9
10.9
10.9
9.8
9.8
9.8
25.2
25.2
25.2
25,400
25,400
25,400
476
476
476
48
48
48
61
61
61
74
74
74
85
85
85
106
106
106
125
125
125
12 T
250
600
1,000
10.9
10.9
10.9
9.8
9.8
9.8
27.1
27.1
27.1
29,000
29,000
29,000
476
476
476
48
48
48
61
61
61
74
74
74
85
85
85
106
106
106
125
125
125
12 P
250
600
1,000
12.9 11.8
12.9 11.8
13.0 11.8
29.5
31.2
34.3
29,000
29,000
29,000
288
333
502
56
68
60
72
86
76
87 101
103 119
92 106
126
147
132
148
171
155
14 T
250
600
1,000
12.6 11.5
12.6 11.5
12.6 11.5
27.5
27.5
29.1
23,600
23,600
23,600
309
309
357
55
55
66
71
71
84
85 99
85 99
101 116
123
123
143
144
144
167
14 P/
16 T
250
600
1,000
14.1 13.0
14.1 13.0
14.1 13.0
31.3
31.3
33.1
28,100
28,100
28,100
221
221
255
62
62
74
79
79
94
95 110
95 110
113 130
138
138
160
162
162
187
16 P/
18 T
250
600
1,000
16.0 14.8
16.0 14.8
16.0 14.8
35.5
35.5
37.7
31,700
31,700
31,700
152
152
175
70
70
84
90 108 125
90 108 125
107 128 148
156
156
182
183
183
212
1.
2.
3.
10
Max
OD ID Weight1
Depth
(in.) (in.) (lbs./ft.)
(ft.)
Based on 0.030 in. slot size (collapse values contain no safety factor)
Recommended hang weight is 50 percent of the calculated tensile strength
Transmitting screen = open area x 0.31 at 0.1 ft./sec.
Max
OD
Depth:
(in.)
(ft.)
Recom.
Collapse
ID Weight1:
Hang
1
Strength
(in.) (lbs/ft.) Weight 2
(PSI)
(lbs)
40
50
60
80
100
18 P/
20 T
250
600
1,000
17.9
17.9
18.0
16.7
16.7
16.7
39.0
41.5
46.1
32,600
32,600
32,600
108
125
190
78
94
82
100
120
106
121
144
127
140
165
147
175
204
183
205
237
214
20 P
250
600
1,000
20.0
20.0
20.1
18.8
18.8
18.8
44.0
46.7
51.9
38,100
38,100
38,100
78
90
137
87
105
92
112
134
118
135
160
142
157
185
164
195
228
204
229
265
239
24 T
250
600
1,000
21.9
21.9
22.0
20.7
20.7
20.7
48.7
51.7
57.4
43,500
43,500
43,500
59
68
104
96
115
101
123
147
129
148
176
155
171
202
180
214
249
223
251
290
262
24 P/
26 T
100
250
600
1,000
24.2
24.2
24.3
24.4
22.8
22.8
22.8
22.8
53.8
57.1
63.2
74.6
48,100
48,100
48,100
48,100
44
51
78
124
106
127
111
149
136
162
143
189
163
194
172
224
189
223
198
257
236
275
247
313
277
320
289
361
26 P
100
250
600
1,000
25.8
25.8
25.9
26.0
24.4
24.4
24.4
24.4
57.5
61.0
67.6
79.7
51,700
51,700
51,700
51,700
36
42
64
102
113
136
119
159
145
173
152
201
174
207
183
239
202
238
211
274
252
294
263
334
296
341
308
384
30 T
100
250
600
1,000
27.1
27.1
27.2
27.3
25.8
25.8
25.8
25.8
59.8
63.5
70.3
83.1
51,700
51,700
51,700
51,700
31
36
55
88
118
143
125
167
152
182
160
211
183
217
192
251
212
250
222
287
265
308
276
350
311
358
323
404
30 P/
36 T
250
600
29.7
29.9
28.3
28.3
70.4
91.6
60,100
60,100
28
67
156
183
199
211
238
275
274
315
338
384
393
442
36 P
100
250
600
100
250
600
35.7
35.8
35.9
34.3
34.3
34.3
69,800
69,800
69,800
83.9
92.9
109.3
16
24
39
188
164
219
239
210
278
286
292
378
406
364
461
472
426
531
1.
2.
3.
NOTES:
- Screens are available in up to 40 ft.
lengths of continuously wrapped
screen with no mid-weld
- P - pipe size, T - telescope
- For application depths > 1, 000 ft.,
contact Technical Support
Based on 0.030 in. slot size (collapse values contain no safety factor)
Recommended hang weight is 50 percent of the calculated tensile strength
Transmitting capacity in gpm/ft. of screen = open area x 0.31 at 0.1 ft./sec.
11
6P
250
1,000
6.6
6.6
6.0
5.9
6.3
7.9
5,100
9,600
266
266
25
25
46
46
63
63
77
77
90
90
100 118
100 118
132
132
8T
600
1,000
7.5
7.7
6.7
6.7
9.2
16.6
12,100
24,100
182
573
29
19
52
37
71
52
88
65
150
121
8P
250
600
1,000
8.6
8.7
8.8
7.9
7.9
7.9
10.4
14.9
18.8
13,300
13,300
26,500
121
399
385
33
22
22
59
41
42
82
58
59
172
137
139
10 T
250
600
1,000
9.3
9.5
9.6
8.6
8.6
8.6
11.7
16.6
21.1
19,000
15,700
31,300
96
307
297
35
24
24
64
45
46
88
64
64
186
150
151
10 P
100
600
1,000
10.6
10.7
10.8
9.8
9.8
9.8
13.0
18.5
23.3
16,800
16,800
33,600
65
215
209
40
27
27
211
169
170
12 T
100
600
1,000
11.2 10.4
11.2 10.4
11.4 10.4
14.1
14.1
25.4
19,300
19,300
38,500
55
55
178
43
43
29
223
223
180
12 P
100
600
1,000
12.6 11.8
12.7 11.8
12.8 11.8
15.2
21.7
27.2
19,300
19,300
38,500
39
129
126
48
32
32
251
200
202
14 T
100
600
1,000
12.3 11.6
12.5 11.6
12.7 11.6
14.0
20.3
31.7
15,700
15,700
31,300
42
135
348
47
32
25
245
197
168
14 P/
16 T
250
600
1,000
14.0 13.1
14.1 13.1
14.2 13.0
23.1
30.6
36.1
18,700
18,700
37,300
96
255
250
35
27
27
66
52
52
221
187
188
1.
2.
3.
12
94
74
75
Based on 0.030 in. slot size (collapse values contain no safety factor)
Recommended hang weight is 50 percent of the calculated tensile strength
Transmitting capacity in gpm/ft. of screen = open area x 0.31 at 0.1 ft./sec.
Recom.
Max
Collapse
OD ID Weight1 Hang
Depth
Strength1
2
(in.) (in.) (lbs./ft.) Weight
(ft.)
(PSI)
(lbs.)
10
30
40
50
60
80
100
16 P/
18 T
250
600
1,000
16.0 15.0
16.2 15.0
16.1 14.8
26.4
35.1
40.9
21,100
21,100
42,100
65
169
172
40
31
31
76
60
59
18 P/
20 T
100
600
1,000
17.8 16.7
17.9 16.7
18.0 16.7
28.8
35.1
40.9
21,700
21,700
43,300
47
125
123
45
35
35
84
66
66
20 P
100
600
19.8 18.8
20.0 18.8
32.5
43.1
25,300
25,300
34
90
50
39
94
74
24 T
100
600
21.8 20.7
21.9 20.7
35.9
47.6
28,900
28,900
26
68
55
42
24 P /
26 T
250
24.2 22.8
57.1
48,100
51
47
89
NOTES:
- Screens are available in up to 40 ft.
lengths of continuously wrapped
screen with no mid-weld
- P - pipe size, T - telescope
- For application depths > 1, 000 ft.,
contact Technical Support
26 P
250
25.8 24.4
61.0
51,700
42
50
30 T
250
27.2 25.8
63.5
51,700
36
52
30 P/
36 T
250
29.7 28.3
70.4
60,100
28
57
1. Based on 0.030 in. slot size (collapse values contain no safety factor)
2. Recommended hang weight is 50 percent of the calculated tensile strength
3. Transmitting capacity in gpm/ft. of screen = open area x 0.31 @ 0.1 ft./sec.
13
Size
(in.)
Approx.
Media
Approx.
Screen
Annular
Screen
ID
Thickness
OD (in.)
(in.)
(in.)
25
26
30
30
40
36
50
41
8 12
20 28
20
42
25
50
30
57
40
68
50
77
2x4
2.2
4.5
0.85
8 12 20
11 15 22
3x5
3.0
5.7
0.97
16 22 33
39
44
53
60
25 36
54
63
72
86
98
23
4x6
4.0
6.7
0.94
20 28 42
50
57
68
77
30 42
63
74
84
101
115
25
5x7
5.0
7.7
0.87
25 35 53
62
71
85
96
34 48
73
85
97
116
132
27
6x8
6.0
8.7
0.84
20 29 45
54
62
77
89
27 39
60
71
82
101
117
35
17
8 x 10
8.0
10.8
0.84
27 38 59
71
81
100 116 33 48
74
89
102
125
145
55
10 x 12
10.0
12.8
0.84
26 38 60
72
83
104 122 31 45
71
86
99
124
145
70
12 x 15
12.0
15.0
0.84
31 45 71
85
99
123 145 36 53
83
100 116
145
170
85
14 x 16
13.2
16.0
0.64
36 52 81
98
93
112 129
161
188
100
16 x 18
15.2
18.0
0.64
126 145
181
212
115
18 x 20
17.0
20.0
0.78
122 141
177
209
128
Collapse Strength
(PSI)
Tensile Strength
(PSI)
Rod
Rod
Rod
Muni-Pak
Muni-Pak
Muni-Pak
Based
Based
Based
2
2x4
1,940
16,500
4,300
12,500
14
Approx.
Screen
Weight
(lbs/ft.)
1.
2.
3x5
540
5,650
5,200
15,000
4x6
730
2,830
6,100
18,800
5x7
440
1,550
7,000
20,700
6x8
260
990
17,600
41,600
8 x 10
250
1,160
24,200
50,000
10
10 x 12
360
630
30,800
81,400
12
12 x 15
220
880
35,200
87,000
14
14 x 16
170
1,110
35,200
95,400
16
16 x 18
170
760
72,200
135,900
18
18 x 20
130
540
74,200
147,200
STANDARD
FILTER PACK SIZES
Slot
Size
(in.)
0.008
Media
Size
Filter
Pack
n/a
40/60
0.012
20/40
20/40
0.020
16/20
16/30
0.025
n/a
10/20
0.030
12/18
n/a
0.040
8/14
8/12
0.050
6/12
n/a
Pipe
OD
(in.)
Pipe
Open
Area Per
ft./sq.
(in2 .)
Screen
OD
(in.)
Approx.
Weight
(lbs.)
10
15
20
25
30
1.5
1.90
7.95
2.40
9.0
12.9
16.5
19.7
22.6
2.0
2.38
9.28
2.90
10.9
15.6
19.9
23.8
27.3
2.5
2.88
10.60
3.40
12.8
18.3
23.3
27.9
32.0
3.0
3.50
11.93
4.00
10
15.1
21.5
27.4
32.8
37.7
4.0
4.50
28.27
5.00
14
18.8
26.9
34.3
41.0
47.1
5.0
5.56
35.34
6.10
17
23.0
32.9
41.8
50.0
57.5
6.0
6.63
40.06
7.10
24
26.8
38.2
48.7
58.2
66.9
7.0
7.00
37.70
7.50
35
28.3
40.4
51.4
61.5
70.7
7.625
7.63
42.41
8.10
44
30.5
43.6
55.5
66.4
76.3
8.63
49.48
9.10
38
34.3
49.0
62.4
74.6
85.8
9.625
9.63
49.48
10.10
41
38.1
54.4
69.2
82.8
95.2
10.0
10.75
56.55
11.30
49
42.6
60.9
77.5
92.6
106.5
12.0
12.75
65.97
12.30
60
46.8
66.9
85.1
101.7
116.9
14.0
14.00
70.69
14.50
69
55.2
78.8
100.3
119.9
137.8
16.0
16.00
75.40
16.50
78
62.8
89.7
114.1
136.4
156.8
18.0
18.00
84.82
18.50
85
70.4
100.6
128.0
152.9
175.8
NOTES:
Weight is based on standard wall pipe,
except for 7.63 in.
15
CASINGS
Sch.
OD
(in.)
ID
(in.)
1.0
5
10
40
1.315
1.185
1.097
1.049
1.25
5
10
40
1.660
1.530
1.442
1.380
1.12
1.82
2.29
1,362
3,271
4,736
1.5
5
10
40
1.900
1,770
1,682
1,610
1.29
2.10
2.74
1,074
2,704
4,177
2.0
5
10
40
2.375
2.245
2.157
2.067
1.62
2.66
3.69
650
1,824
3.208
3.0
5
10
40
3.500
3.334
3.260
3.068
3.06
4.37
7.65
468
1,050
2,972
4.0
5
10
40
4.500
4.334
4.260
4.026
3.95
5.67
10.90
253
614
2,303
5.0
5
10
40
5.563
5.345
2.295
5.047
6.41
7.84
14.75
295
486
1,854
6.0
5
10
40
6.625
6.407
6.357
6.065
7.66
9.38
19.15
189
319
1,570
8.0
10
40
8.625
8.329
7.981
13.53
28.82
210
1,243
10.0
10
40
10.750
10.420
10.020
18.83
40.86
157
1,030
12.390
10
12.750
12.000
0.375*
24.39
50.03
126
762
12.0
Weight Collapse
Per
Strength
ft.
(PSI)
0.88
1.42
2,445
1.70
OD
(in.)
ID
(in.)
Weight
Per (ft.)
1.0
1.315
1.049
1.68
Collapse
Strength
(PSI)
6,127
1.25
1.660
1,380
2.27
4,743
1.5
1.900
1,610
2.72
4,185
2.0
2.375
2.067
3.65
3,219
3.0
3.500
3.068
7.58
2,983
4.0
4.500
4.026
10.79
2,316
5.0
5.563
5.047
14.62
1,869
6.0
6.625
6.065
18.97
1,585
8.0
8.625
7.981
28.55
1,259
10.0
10.750
10.020
40.48
1,045
12.0*
12.750
12.000
49.56
776
* Standard wall
16
SPECIFICATIONS
WELL SCREENS
General: Well screens shall be of the continuous slot design to
provide maximum open area, to reduce entrance velocity, increase
hydraulic efficiency and promote more effective development. The
well screens shall be constructed of Vee-Wire trapezoidal wire,
continuously wrapped around an array of equally spaced support
rods of the same material. Each junction of wire/rod contact shall
be resistance welded. The screens and end fittings shall be made of
__________ (material). The well screens shall be the
Johnson Screens product brand, or an approved equal.
Collapse strength: Well screens shall be __________ inches OD,
continuous slot wire-wrapped __________ (material), designed to
withstand a minimum collapse pressure of ______ psi for a _____
inch slot opening. The surface wire shape shall cause the slot opening
to widen inwardly to minimize clogging. Surface wrap-wire height
shall be _____ inches to provide the desired collapse strength. The
wrap-wire face width shall be of minimum dimensions to provide
_____ percent open area at the anticipated _____ inch slot opening.
Tensile strength: The minimum screen tensile strength must exceed
at least twice the total weight of the screen and any standard wall
blank casing suspended below the top screen joint. The tensile
strength shall be a minimum of _____ pounds. (Tensile strength is
total rod area times material yield strength.)
Screen configuration: Screens shall be manufactured in various
lengths complete with __________ (material) weld rings attached
to each end. The weld rings shall be standard available lengths as
requested by the contractor and approved by the engineer.
SCREEN SUBMITTALS
Upon request, the screen manufacturer shall provide a submittal and
schematic drawing of the proposed screen design. The documents
shall include the OD, ID, construction materials, slot size, approximate
weight per foot, wrap-wire length, wrap-wire height, collapse
strength, percent open area, inlet open area per foot, transmitting
capacity per foot, number of support rods, diameter of support rods,
total cross sectional rod area, material yield strength, tensile strength,
column load and recommended hang weight.
MUNI-PAK SCREENS
General: Muni-Pak screens shall be of the continuous slot design
to provide maximum open area, to reduce entrance velocity, increase
hydraulic efficiency and promote more effective development. Both
17
DI-ELECTRIC COUPLING
Di-Electric couplings prevent galvanic corrosion in municipal and industrial water well completions.
When two dissimilar metals are coupled in water-saturated environments, the less corrosion-resistant metal
corrodes faster from the galvanic cell created. This corrosion can be prevented by eliminating the contact
between the two metal surfaces.
A Di-Electric coupling uses non-conducting insulating ring material to isolate the metal surfaces and prevent
electrical contact. This feature increases the life of the pipe and the life of the well.
Di-Electric couplings are available for pipe sizes from 1.5 - 24 in. (38 to 609 mm). Special sizes or connection
adapters are available on request.
18
02
03
01_Central Utah Water Conservancy
District (CUWCD) 24 in. culinary well
02_Sample of screen used for the
installation
03_24 in. screen installed
01
19
Chemical Cleaning, Disinfection & Decontamination of Water Wells book is a concise, complete
assessment of the important role certain chemicals play in modern water treatment, water system
construction and maintenance programs.
Included in this text are complete descriptions of chemicals frequently used in water supply
applications. With a focus on effective and efficient use of chemicals, individually or in combination,
to achieve better well rehabilitation, water system cleaning and water quality treatment.
Diagrams, formula mixer ratios and other technical data are included, along with proper handling
techniques for each chemical and, where appropriate, clear warnings about possible hazards and the
conditions that can cause them.
Chemical Cleaning, Disinfection & Decontamination of Water Wells book is in a convenient format for
use on job sites, as well as classrooms and labs.