Sunteți pe pagina 1din 8

Cisco- 200-120-CCNA Cisco Certified

Network Associate CCNA


Pass Cisco 200-120 exam with 100%
Guarantee
100% REAL EXAM QUESTIONS ANSWERS
Get All PDF with Complete Questions Answers File from

http://www.examcollectionvce.com/vce-200-120.html
100% Exam Passing Guarantee & Money Back Assurance

Sample Questions

QUESTION 1
Refer to exhibit:

Which destination addresses will be used by Host A to send data to


Host C? (Choose two.)

A. the IP address of Switch 1


B. the MAC address of Switch 1
C. the IP address of Host C
D. the MAC address of Host C
E. the IP address of the router's E0 interface
F. the MAC address of the router's E0 interface

Answer: C, F

Question: 2
The network administrator must establish a route by which London workstations
can forward traffic to the Manchester workstations. What is the simplest way to
accomplish this?

A. Configure a dynamic routing protocol on London to advertise all routes to


Manchester.
B. Configure a dynamic routing protocol on London to advertise summarized routes
to Manchester.
C. Configure a dynamic routing protocol on Manchester to advertise a default route
to the London router.
D. Configure a static default route on London with a next hop of 10.1.1.1.
E. Configure a static route on London to direct all traffic destined for 172.16.0.0/22
to 10.1.1.2.
F. Configure Manchester to advertise a static default route to London.

Answer: E

Question: 3
Refer to the exhibit. What is the most appropriate summarization for these
routes?

A.
B.
C.
D.

10.0.0.0 /21
10.0.0.0 /22
10.0.0.0 /23
10.0.0.0 /24

Answer: B

Question: 4
Router1 was just successfully rebooted. Identify the current OSPF router ID for
Router1.

A.
B.
C.
D.

208.149.23.194
220.173.149.10
208.149.23.162
190.172.32.10

Answer: A

Question: 5
What is the meaning of the term dynamic as displayed in the output of the show
frame-relay map command shown?

A. The Serial0/0 interface is passing traffic.


B. The DLCI100 was dynamically allocated by the router.
C. The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP
server.
D. The DLCl100 will be dynamically changed as required to adapt to changes in the
Frame Relay cloud.
E. The mapping between DLCI 100 and the end station IP address 172.16.3.1 was
learned through inverse ARP.
Answer: E

Question: 6
What will happen if a private IP address is assigned to a public interface
connected to an ISP?
A.
B.
C.
D.
E.

Addresses in a private range will be not routed on the Internet backbone.


Only the ISP router will have the capability to access the public network.
The NAT process will be used to translate this address in a valid IP address.
Several automated methods will be necessary on the private network.
A conflict of IP addresses happens, because other public routers can use the
same range.

Answer: A

Question: 7
Which Cisco Catalyst feature automatically disables the port in an operational
PortFast upon receipt of a BPDU?
A.
B.
C.
D.
E.

BackboneFast
UplinkFast
Root Guard
BPDU Guard
BPDU Filter

Answer: D

Question: 8
A router has two Fast Ethernet interfaces and needs to connect to four VLANs in
the local network. How can you accomplish this task, using the fewest physical
interfaces and without decreasing network performance?

A.
B.
C.
D.

Add two more FastEthernet interfaces.


Add a second router to handle the vlan traffic.
Use a hub to connect the four vlans with a FastEthernet interface on router.
Implement a router-on-a-stick configuration.

Answer: D

Question: 9
What statement is true of the configuration for this network?

Based on the information shown above, Which of the following correctly describe
the configuration for this network?
A. The configuration that is shown provides inadequate outside address space for
translation of the number of inside addresses that are supported.
B. Because of the addressing on interface FastEthemet0/1, the Serial0/0 interface
address will not support the NAT configuration as shown.
C. The number 1 referred to in the ip nat inside source command references
access-list number1.
D. External Router must be configured with static routers to networks 172.16.2.0/24.

Answer: C

Question: 10
The network administrator is asked to configure 113 point-to-point links. Which IP
addressing scheme best defines the address range and subnet mask that meet
the requirement and waste the fewest subnet and host addresses?
A.
B.
C.
D.
E.

10.10.0.0/18 subnetted with mask 255.255.255.252


10.10.0.0/25 subnetted with mask 255.255.255.252
10.10.0.0/24 subnetted with mask 255.255.255.252
10.10.0.0/23 subnetted with mask 255.255.255.252
10.10.0.0/16 subnetted with mask 255.255.255.252

Answer: D

Buy Complete Questions Answers File from

100% Exam Passing Guarantee & Money Back Assurance


PDF Version + Test Engine Software Version
60 Days Free Updates Service
Valid for All Countries

http://www.examcollectionvce.com/vce-200-120.html

S-ar putea să vă placă și