Documente Academic
Documente Profesional
Documente Cultură
Offering Guide
www.parkerorings.com
ORD 5712
Effective August 2002
O-Ring Material
Offering Guide
WARNING
Failure, improper selection or improper use of the
products and/or systems described herein or related items
can cause death, personal injury or property damage.
This document and other information from Parker Hannifin Corporation, its
subsidiaries and authorized distributors provides product and/or system options
for further investigation by users having technical expertise. It is important that
you analyze all aspects of your application and review the information
concerning the product or system in the current product catalog. Due to the
variety of operating conditions and applications for these products or systems,
the user, through his or her own analysis and testing, is solely responsible for
making the final selection of the products and systems and assuring that all
performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features,
specifications, designs, availability and pricing, are subject to change by Parker
Hannifin Corporation and its subsidiaries at any time without notice.
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker
Hannifin Corporation, its subsidiaries and its authorized distributors. This offer
and its acceptance are governed by the provisions stated on the separate
page of this document entitled Offer of Sale.
Copyright 2002 Parker Hannifin Corporation, Cleveland, OH. All rights reserved.
ORD 5712
O-Ring
Material
Offering
Guide
Table of Contents
Introduction
Material Offering
Engineering Tools
29
Gland Designs
37
Sizing Charts
47
ORD 5712
Quality Assurance
In the O-Ring Divisions world-class facilities, skilled Parker
technicians manufacture o-rings to exacting standards, closely
monitoring each step of the process through a Controlled Batch
Identification (CBI) program. From in-house mixing and tooling
operations to the final non-contact inspection process, state-of-the art
technology is employed to provide unparalleled material consistency
and dimensional control. Quality certifications (AS 9000, ISO 9001,
QS 9000 and VDA 6.1) are maintained to ensure superior product
performance and process repeatability.
INTRODUCTION
ORD 5712
Literature
Since their initial release decades ago, the
Parker O-Ring Handbook (ORD 5700 USA)
and the Precision O-Ring Handbook (5705E)
(published in Europe in various
languages) have become fixtures on
the reference shelves of engineers
and seal specifiers worldwide.
ORD 5712
Desktop Seal
Design
Parkers Total
inPHormTM software
brings seal design and
material specification
right to the engineers
desktop. The software,
which consists of modules for o-ring, hydraulic
and pneumatic, static face and standard composite
seal products (as well as EMI shielding and thermal management),
uses a simple interface to guide users through the design of
application-specific glands and seals. It automatically crossreferences thousands of part numbers, and recommends materials
based on the requirements of SAE, MIL and other standards. Total
inPHorm also contains a complete array of online reference material,
including test reports, technical bulletins and seal maintenance
instructions. It is available on CD-ROM in English, German and
French versions.
Online Tools
The Parker O-Ring Division's
website at www.parkerorings.com
offers many time-saving tools,
including temperature and
dimension converters, gland design
recommendation charts, a
troubleshooting utility and a pressure
calculator. The site also features an
interactive compatibility guide that
recommends elastomeric compounds for use in hundreds of fluids from Abietic Acid to Zirconium Nitrate.
INTRODUCTION
ORD 5712
Product Lines
O-Rings
Manufactured to US and international standards: AS 568B, ISO 3601, DIN
3771, JIS and metric. Custom sizes of almost any dimension.
Miniature O-rings, large special O-rings, continuously molded and spliced
cord.
Perfluorinated (FFKM) O-rings, custom molded products and die-cuts.
Broadest chemical resistance, highest purity and temperature resistance of
any elastomeric family - up to 320C/608F.
ORD 5712
O-Ring Kits
With conveniently arranged O-rings for repair, assembly and workshop.
Accessories
Products to assist O-ring users include assembly greases and lubricants,
sizing cones and extraction tools.
ORD 5712
Material Offering
MATERIAL OFFERING
Compounds
O-rings can be molded in a wide range of compounds in hardnesses from
40 to 95 Shore A. These materials include:
Acrylonitrile-Butadiene (NBR)
Chloroprene (CR)
Ethylene Propylene (EPDM)
Fluorosilicone (FVMQ)
Perfluoroelastomer (FFKM)
Silicone (VMQ)
Butyl (IIR)
Ethylene Acrylic (AEM)
Fluorocarbon (FKM)
Hydrogenated Nitrile (HNBR)
Polyacrylate (ACM)
Parker O-ring compounds are formulated to meet the most stringent industry
standards, including NSF, Underwriters Laboratories (UL), Military (MIL-SPEC),
Aerospace (AMS), NASA, FDA, USDA, USP, and many customer-specific
requirements.
ORD 5712
TYPE I
0674
-70
Polymer Code
(Single Letter)
Sequence Number
(four digits)
Durometer Indicator
(two digits)
TYPE II
A
150
Polymer Code
A Polyacrylate
B Butyl
C Neoprene (Chloroprene)
E Ethylene Propylene
F Parofluor ULTRA
H Hifluor
K HNBR
-70
L
N
P
S
V
Z
Fluorosilicone
Nitrile (Buna N) and HNBR
Polyurethane
Silicone
Fluorocarbon, Aflas, Hifluor,
Parofluor
Exotic Polymers
ORD 5712
COMPOUND NO.
TEMP. RANGE
(Degrees F) COLOR
RECOMMENDED FOR
POLYACRYLATE
POLYACRYLATE (ACM)
(ACM)
ACM
ACM (acrylic
(acrylic rubber)
rubber) has
has good
good resistance
resistance to
to mineral
mineral oil,
oil, oxygen
oxygen and
and ozone.
ozone.The
The water
water
compatibility
compatibility and
and cold
cold flexibility
flexibility of
of ACM
ACM are
are considerably
considerably worse
worse than
than with
those
NBR.
with NBR.
-40 to 325
BLACK
AA150-70 (12307)
-5 to 350
BLACK
AA154-75 (12358)
-5 to 350
BLACK
ETHYLENE ACRYLATE
ACRYLATE (AEM)
(AEM)
ETHYLENE
Ethylene acrylate
acrylate is
is aa mixed
mixed polymer
polymer of
of ethylene,
ethylene, methyl
methyl acrylate
acrylate,and
andaasmall
smallamount
amountofof
Ethylene
carboxylated cure-site
cure-site monomer.
monomer. Developed
Developed as
as aa lower-temperature
lower-temperature version
version of
of
carboxylated
Polyacrylate, but
but swells
swells slightly
slightly more.
more. Polymer
Polymer is
is sold
sold under
under the
the tradename
tradenameVAMAC
VAMAC..
Polyacrylate,
AE152-70 (12897)
Transmissions
-40 to 325
BLACK
AE153-75 (12917)
Transmissions,
Internally Lubed
-40 to 325
BLACK
BUTYL
BUTYL RUBBER
RUBBER (IIR)
(IIR)
Butyl
Butyl rubber
rubber (isobutylene-isoprene
(isobutylene-isoprene rubber
rubber or
or IIR)
IIR) has
has aa very
very low
low permeability
permeability rate
rate and
and
good
good electrical
electrical properties,
properties, but
but poor
poor short-term
short-term rebound.
rebound.
B0318-70
AMS 3238
-75 to 250
BLACK
B0612-70
BLACK
B1167-80
BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
Vamac is a registered trademark of E.I. DuPont de Nemours and Company.
Aflas is a trademark of Asahi Glass Co.
MATERIAL OFFERING
A1111-70
ORD 5712
COMPOUND NO.
TEMP. RANGE
(Degrees F) COLOR
RECOMMENDED FOR
CHLOROPRENE
POLYCHLOROPRENE
RUBBER
RUBBER
(CR) (CR)
Also
Also known
known by
by the
the tradename
tradename Neoprene,
Neoprene, polychloroprene
polychloroprene was
was the
the first
first synthetic
synthetic rubber
rubber
and
and exhibits
exhibits generally
generally good
good ozone,
ozone, aging,
aging, and
and chemical
chemical resistance.
resistance. ItIt has
has good
good mechanical
properties
mechanicalover
properties
a wide temperature
over a wide temperature
range.
range.
C0267-50
MIL-G-1149 Ty I Cl I
AMS 3208, Low Temp.
-60 to 250
BLACK
C0518-60
General Purpose
-35 to 225
BLACK
C0557-70
Drive Belt
-35 to 250
BLACK
C0873-70
General Purpose
-35 to 225
BLACK
C0944-70
General Purpose
-35 to 250
C1124-70
BLACK
C1276-70
-35 to 250
BLACK
CL172-70 (2347)
Internally Lubed
-35 to 225
BLACK
C1278-80
-35 to 250
BLACK
CB173-80 (2598)
-35 to 250
BLACK
RED
E1100-50
General Purpose
-70 to 250
BLACK
EA454-50 (3575)
UL Listed
-70 to 250
BLACK
E1157-60
General Purpose
-70 to 250
BLACK
E1561-60
-70 to 250
BLACK
EB151-60 (3806)
-70 to 250
BLACK
E0751-65
-70 to 250
BLACK
E0603-70
General Purpose
-70 to 250
BLACK
E0667-70
-70 to 250
BLACK
E0803-70
General Purpose
-70 to 250
BLACK
E1022-70
-70 to 250
BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
Parker Hannifin Corporation O-Ring Division
10
ORD 5712
COMPOUND NO.
TEMP. RANGE
(Degrees F) COLOR
RECOMMENDED FOR
-70 to 250
BLACK
E1244-70
-70 to 250
BLACK
E1257-70
NSF 61,
Chloramine Resistant
-70 to 250
BLACK
E1549-70
-70 to 250
BLACK
E1570-70
-70 to 250
BLACK
E1571-70
NSF 61
-70 to 250
BLACK
E1583-70
-70 to 250
BLACK
E3609-70
-70 to 250
BLACK
EB164-70 (3817)
General Purpose
-70 to 250
BLACK
EB173-70 (3217)
-70 to 250
BLACK
EB152-70 (3407)
General Purpose
-70 to 250
BLACK
EB165-70 (3477)
-70 to 250
BLACK
EB153-75 (3297)
-70 to 250
BLACK
E0692-75
-70 to 250
BLACK
E0740-75
Nuclear Applications
-70 to 250
BLACK
EJ150-75 (3077)
-70 to 250
BLACK
EB155-80 (3478)
-70 to 250
BLACK
EJ151-80 (3958)
-70 to 250
BLACK
E0515-80
MIL-P-82744
-70 to 250
BLACK
E0540-80
General Purpose
-70 to 250
BLACK
E0893-80
General Purpose
-70 to 250
PURPLE
E1267-80
NAS 1613
-70 to 250
BLACK
E0652-90
General Purpose,
Back-Up Rings
-60 to 250
BLACK
E0962-90
BLACK
11
MATERIAL OFFERING
E1028-70
ORD 5712
COMPOUND NO.
RECOMMENDED FOR
TEMP. RANGE
(Degrees F) COLOR
FLUOROSILICONE (FVMQ
(FVMQ)
FLUOROSILICONE
Fluorosilicone is
is aa silicone
silicone polymer
polymer chains
chain with
Fluorosilicone
withfluorinated
fluorinatedside-chains
side-chainsfor
forimproved
improvedoil
oil
and fuel
fuel resistance.
resistance.The
Themechanical
mechanicaland
andphysical
physicalproperties
propertiesare
arevery
verysimilar
similartotothose
thoseofof
and
silicone.
silicone.
LM151-50 (11645)
General Pupose
-100 to 350
BLUE
LM152-60 (11646)
AMS-R-25988, TY 1,
CL I, Gr 60, AMS 3325
-100 to 350
BLUE
L1223-60
AMS-R-25988, TY 1,
CL I, Gr 60, AMS 3325
-100 to 350
BLUE
LM153-70 (11647)
AMS-R-25988,
TY I, CL I, GR 70
-100 to 350
BLUE
L1120-70
AMS-R-25988, TY I,
CL I, GR 70, UL listed
-100 to 350
BLUE
LM154-75 (11837)
AMS-R-25988,
TY I,CL III,GR 75
-90 to 350
BLUE
L1077-75
AMS-R-25988,
TY I,CL III,GR 75
-90 to 350
BLUE
LM155-80 (11648)
AMS-R-25988,
TY I, CL I, GR 80
-90 to 350
BLUE
L1218-80
AMS-R-25988,
TY I, CL I, GR 80
-90 to 350
BLUE
L1186-80
PTFE Loaded
-85 to 350
RUST
ACRYLONITRILE-BUTADIENE
ACRYLONITRILE-BUTADIENE (NBR)
(NBR)
Nitrile
Nitrilerubber
rubber(NBR)
(NBR)isisthe
thegeneral
generalterm
termfor
foracrylonitrile-butadiene
acrylonitrile-butadieneterpolymer.
terpolymer.The
The
acrylonitrile
acrylonitrilecontent
contentof
ofnitrile
nitrilesealing
sealingcompounds
compoundsvaries
variesconsiderably
considerably(18
(18to
to50%.)
50%).
Polymers
Polymerswith
withhigher
higherACN
ACNcontent
contentexhibit
exhibitless
lessswell
swelliningasoline
gasolineand
andaromatic
aromaticsolvents,
solvents,
while
whilelower
lowerACN
ACNpolymers
polymersexhibit
exhibitbetter
bettercompression
compressionset
setand
andlow
lowtemperature
temperatureflexibility.
flexibility.
Polymer
Polymerisisalso
alsocalled
calledBuna-N.
Buna-N.
N0545-40
AMS 3201
-45 to 225
NB100-40 (1454)
General Purpose
-45 to 225
BLACK
BLACK
N0299-50
-55 to 225
BLACK
NA192-50 (8305)
General Purpose
-55 to 225
BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
Parker Hannifin Corporation O-Ring Division
12
ORD 5712
COMPOUND NO.
TEMP. RANGE
(Degrees F) COLOR
RECOMMENDED FOR
NBR - continued
Internally Lubed
-55 to 225
NA150-60 (8306)
General Purpose
-55 to 225
BLACK
BLACK
N0406-60
AMS-R-6855 CL 1,
CL 1, GR 60
-40 to 225
BLACK
N0525-60
-25 to 250
BLACK
N1219-60
-30 to 225
BLACK
NF162-65 (1106)
-25 to 250
BLACK
N0506-65
AMS 7271
-70 to 180
BLACK
NX352-70 (7727)
Carboxylated
-25 to 250
BLACK
NJ253-70 (7077)
FDA
-35 to 212
BLACK
NF153-70 (7657)
Fuel Resistant,
SAE 120R1 Class II
-35 to 180
BLACK
NA151-70 (8307)
General Purpose
-30 to 250
BLACK
NL153-70 (8317)
Internally Lubed
-30 to 250
BLACK
NA153-70 (8497)
Automotive Applications
-30 to 250
BLACK
47-071
AMS-R-7362
-60 to 180
BLACK
N0103-70
Low Temp.
-55 to 225
BLACK
N0287-70
Synthetic Lubricant
Resistant, AMS 7272
-35 to 250
BLACK
N0497-70
-35 to 212
BLACK
N0602-70
General Purpose,
AMS-P-5315, Low Temp
-70 to 180
BLACK
N0674-70
General Purpose
MIL-G-21569, Cl I,
UL listed
-30 to 250
BLACK
N0757-70
-30 to 225
BLACK
N0818-70
Internally Lubed
-30 to 250
BLACK
N0828-70
-30 to 225
BLACK
N1069-70
FDA
-30 to 180
BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
13
MATERIAL OFFERING
NL151-50 (8315)
ORD 5712
COMPOUND NO.
TEMP. RANGE
(Degrees F) COLOR
RECOMMENDED FOR
NBR - continued
N1220-70
-30 to 225
BLACK
N1470-70
General Purpose
-40 to 225
BLACK
N1499-70
General Purpose, UL
-30 to 250
BLACK
N1510-70
NSF 61
-30 to 225
BLACK
N1517-70
NSF 61
-30 to 225
BLACK
N1527-70
UL Listed
-30 to 225
BLACK
NB103-75 (1527)
-30 to 225
BLACK
NW163-75 (40601)
Internally Lubed
-30 to 225
RUST
NM156-75 (7377)
N0304-75
AMS-P-25732
N0508-75
FDA, USDA
N0756-75
AMS-P-83461
N0951-75
High Temp,
Low Compression Set
-25 to 275
BLACK
N1500-75
-35 to 212
BLACK
N1565-75
UL Listed
-30 to 225
BLACK
N1591-75
UL Listed
-30 to 225
BLACK
NA155-80 (7538)
Abrasion Resistant
-25 to 250
BLACK
N0750-80
Carboxylated
-25 to 250
BLACK
N1090-85
"ELF" Pneumatic,
Carboxylated
-25 to 225
BLACK
NA156-90 (8309)
General Purpose
-25 to 225
BLACK
NB107-90 (1929)
Extrusion Resistant
-25 to 225
BLACK
N0300-90
Back Up Rings
-40 to 180
BLACK
N0507-90
-65 to 180
BLACK
N0552-90
General Purpose
-30 to 250
BLACK
N0702-90
-30 to 275
BLACK
N1210-90
-30 to 275
BLACK
N1444-90
Parbaks only
-30 to 250
BLACK
N1490-90
General Purpose
-30 to 250
BLACK
-30 to 180
BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
Parker Hannifin Corporation O-Ring Division
14
ORD 5712
COMPOUND NO.
RECOMMENDED FOR
TEMP. RANGE
(Degrees F) COLOR
HYDROGENATED
HYDROGENATED NITRILE
NITRILE (HNBR,
(HNBR, HSN)
HSN)
KB190-50 (21705)
Automotive Applications
KA170-50 (21105)
KB181-60 (21926)
Diesel Applications
N1173-70
General Purpose
N1195-70
Refrigerants
N1206-70
Low Temperature
N1239-70
Refrigerants
KB153-70 (21337)
Automotive Applications
KW157-70 (21607)
Refrigerants
KB161-70 (21377)
KA182-75 (21207)
High Swell,
Auto Applications
KA174-75 (21107)
N1231-80
KB162-80 (21378)
KB163-90 (21379)
POLYURETHANE (AU,
(AU, EU)
EU)
POLYURETHANE
Polyurethaneelastomers
elastomershave
haveexcellent
excellentwear
wearresistance,
resistance,high
hightensile
tensilestrength
strengthand
andhigh
high
Polyurethane
elasticityinincomparison
comparisonwith
withany
anyother
otherelastomers.
elastomers.Permeability
Permeabilityisisgood
goodand
andcomparable
comparable
elasticity
withbutyl.
butyl. Millable
Millableurethanes
urethanesshould
shouldnot
notbe
beconfused
confusedwith
withthermoplastic
thermoplasticurethanes,
urethanes,which
with
which
are generally
less flexible,
andslightly
have slightly
betterresistance.
wear resistance.
are
generally
harder,harder,
less flexible,
and have
better wear
P0642-70
-40 to 180
BLACK
15
MATERIAL OFFERING
Hydrogenated
Hydrogenatednitrile
nitrilewas
wasdeveloped
developedas
asan
anair-resistant
air-resistantvariant
variantof
ofnitrile
nitrilerubber.
rubber. In
InHNBR,
HNBR,
the
thecarbon-carbon
carbon-carbondouble
doublebonds
bondsininthe
themain
mainpolymer
polymerchain
chainare
aresaturated
saturatedwith
withhydrogen
hydrogen
atoms
atomsininaaprocess
processcalled
calledhydrogenation
hydrogenationthat
thatimproves
improvesthe
thematerials
materialsthermal
thermalstability
stabilityand
oxidation
resistance.
and oxidation
resistance.
ORD 5712
COMPOUND NO.
TEMP. RANGE
(Degrees F) COLOR
RECOMMENDED FOR
SILICONE
SILICONE RUBBER
RUBBER (VMQ,
(VMQ, PVMQ)
PVMQ)
Silicone
Silicone elastomers
elastomers have
have relatively
relatively low
low tensile
tensile strength,
strength, poor
poor tear
tear and
and wear
wear resistance.
resistance.
Silicones
Silicones also
also possess
possess good
good insulating
insulating properties
properties and
and tend
tend to
to be
be physiologically
physiologically neutral.
neutral.
S0469-40
AMS 3301
-75 to 400
RUST
S0802-40
FDA
-60 to 400
WHITE
SM150-40 (11354)
FDA
-60 to 400
RUST
S0595-50
AMS 3302
-70 to 400
RUST
S0899-50
ZZ-R-765 CL 1a,1b,2a,2b
GR 50, AMS 3345
-103 to 400
RUST
SM151-50 (11355)
-70 to 400
RUST
S0317-60
FDA, USDA
-103 to 450
RUST
S0613-60
-60 to 450
RUST
SM152-60 (11356)
-60 to 450
RUST
SB160-65 (11486)
Coolant Applications
-60 to 450
RUST
S0383-70
-175 to 400
RUST
S0455-70
High Temperature
S0604-70
-65 to 450
RUST
S1138-70
FDA
-60 to 400
RUST
S1224-70
-65 to 450
RUST
SM153-70 (11357)
UL Listed, FDA
-60 to 450
RUST
SB174-70 (11227)
General Purpose
-60 to 450
RUST
SA166-70 (11507)
General Purpose
-60 to 450
RUST
SB161-70 (11707)
-60 to 450
RUST
S0355-75
-60 to 450
RUST
S0614-80
ZZ-R-765 Cl 2a, 2b
Gr 80, AMS 3305
-65 to 450
RUST
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
Parker Hannifin Corporation O-Ring Division
16
ORD 5712
COMPOUND NO.
TEMP. RANGE
(Degrees F) COLOR
RECOMMENDED FOR
V0986-50
General Purpose
-15 to 400
BROWN
V0763-60
General Purpose
-15 to 400
BROWN
V0769-60
General Purpose
-15 to 400
BLACK
VA150-65 (19356)
General Purpose
-15 to 400
BLACK
V1262-65
-15 to 400
BLACK
V0494-70
Acid Resistant
-15 to 400
BLACK
V0680-70
-15 to 400
RED
V0834-70
-15 to 400
BLACK
VW153-75 (16207)
General Purpose
-15 to 400
BROWN
VA203-75 (16737)
Extrusion Resistant,
Diesel Fuel Injectors
-15 to 400
BLACK
VW173-75 (19457)
Automotive Applications
-15 to 400
GREEN
VB184-75 (19487)
Transmission Applications
-15 to 400
BLACK
VG183-75 (19657)
-40 to 400
BLACK
VB153-75 (19717)
-15 to 400
BLACK
VG162-75 (19727)
-15 to 400
BLACK
V0747-75
AMS-R-83248, TY I, CL I
AMS 7276, UL listed
-15 to 400
BLACK
V0835-75
BLACK
V0848-75
PTFE Loaded
-15 to 400
BLACK
V0884-75
BROWN
V1163-75
-35 to 400
BLACK
V1164-75
-15 to 400
BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
17
MATERIAL OFFERING
Fluorocarbon (FKM) has excellent resistance to high temperatures and a broad range of
chemicals. Permeability and compression set are excellent. Polymer is sold under the
tradenames Viton, Dyneon, and others.
ORD 5712
COMPOUND NO.
TEMP. RANGE
(Degrees F) COLOR
RECOMMENDED FOR
Low Set,
AMS 7276, UL listed
AMS-R-83248, TY I, CL I
-15 to 400
BROWN
V1260-75
-15 to 400
BLACK
V1263-75
-15 to 400
BLACK
V1436-75
General Purpose,
UL Listed
-15 to 400
BLACK
V1475-75
General Purpose
-15 to 400
BLACK
V1476-75
General Purpose
-15 to 400
BROWN
VA151-75 (19357)
General Purpose, UL
-15 to 400
BLACK
VA163-80 (19318)
Internally Lubed
-15 to 400
BLACK
V0965-80
-15 to 400
BLACK
V0709-90
AMS-R-83248, TY I, Cl II
AMS 7259
-15 to 400
BLACK
V0894-90
General Purpose
-15 to 400
BROWN
V1264-90
-15 to 400
BLACK
V1411-90
General Purpose
-15 to 400
BLACK
V1412-90
General Purpose
-15 to 400
BROWN
VA153-90 (19359)
General purpose
-15 to 400
BLACK
VW155-90 (16129)
General Purpose
-15 to 400
GREEN
V1238-95
Extrusion Resistant
Explosive Decompression
-15 to 400
BLACK
VA154-95 (16949)
Extrusion Resistant
-15 to 400
BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
18
ORD 5712
COMPOUND NO.
RECOMMENDED FOR
TEMP. RANGE
(Degrees F) COLOR
V1006-75
General Purpose
25 to 450
VP101-80 (20018)
General Purpose
25 to 450
BLACK
BLACK
VP102-80
Good Compression
Set Resistance
15 to 450
BLACK
V1041-85
ED Resistant
15 to 450
BLACK
VP103-90 (20019)
Extrusion Resistant
25 to 450
BLACK
HIGHLY
FLUORINATED
ELASTOMER (HiFluor)
HIGH PERFORMANCE
FLUOROELASTOMERS
(Hifluor)
Hifluor is Parkers tradename for high performance fluoroelastomers materials that
bridge the gap between traditional fluorocarbon and perfluoroelastomer.
V3819-75
Chemically Resistant,
Low Compression Set
-15 to 400
BLACK
V8534-90
Chemically Resistant,
Extrusion Resistant
-15 to 400
BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynns Precision compound
numbering system.
Hifluor is a trademark of Parker Hannifin Corporation.
19
MATERIAL OFFERING
ORD 5712
What is Parofluor?
The Parofluor Series consists of advanced
perfluorinated elastomers (FFKMs) developed
and produced exclusively by Parker Hannifin.
Parofluor materials exhibit outstanding
retained resiliency as compared with other
perfluorinated elastomers, because they're
formulated specifically for use in the most
demanding sealing applications.
COMPOUND NO.
TEMP. RANGE
Degrees F COLOR
RECOMMENDED FOR
PERFLUOROELASTOMER (Parofluor)
(Parofluor)
PERFLUOROELASTOMER
Perfluoroelastomer isis essentially
a rubber version
of PTFE.
Parker
the under
Perfluoroelastomer
a rubber
version Available
Available from
fromE.
Soldunder
by Parker
tradenames
Parofluor
andand
Parofluor
ULTRA.
the
tradenames
Parofluor
Parofluor
ULTRA.
V1266-65
5 to 572
WHITE
V8545-75
5 to 572
BLACK
V8562-75
5 to 572
WHITE
V8581-90
5 to 572
WHITE
V8588-90
Chemically Resistant,
Extrusion & ED Resistant
5 to 536
BLACK
20
ORD 5712
COMPOUND NO.
MATERIAL OFFERING
TEMP. RANGE
Degrees F COLOR
RECOMMENDED FOR
PERFLUOROELASTOMER(Parofluor
(ParofluorUltra)
Ultra)
PERFLUOROELASTOMER
Perfluoroelastomerisisessentially
a rubber version
of version
PTFE. Available
under
the the
Perfluoroelastomer
a rubber
of PTFE. from
SoldParker
by Parker
under
tradenamesParofluor
Parofluorand
andParofluor
ParofluorULTRA.
ULTRA.
tradenames
FF354-65
5 to 600
WHITE
FF102-75
Acid Resistant
5 to 525
BLACK
FF200-75
5 to 608
BLACK
FF350-75
5 to 600
WHITE
FF352-75
5 to 600
WHITE
FF500-75
Broad Chemical
Resistance
5 to 525
BLACK
FF202-90
Extrusion Resistant,
Low Compression Set
5 to 608
BLACK
21
ORD 5712
Dishwashing Detergents
Laundry Detergents
LP-Gas
F G H
Anhydrous Ammonia
D E
MPS Gas
A B C
Naptha or Kerosene
CODE
Gasoline/Alcohol Blends*
SERVICE
EA454-50 (3575)
EB152-70 (3407)
KA170-50 (21105)
L1120-70
N0299-50
N0497-70
N0674-70
N0757-70
N1499-70
N1500-75
N1591-75 (67357)
NF162-65 (1106)
N1565-75 (67027)
N1527-70 (67147)
SM151-50 (11355)
SM152-60 (11356)
SM153-70 (11357)
V0747-75
VA151-75 (19357)
V0884-75
V1163-75
V1226-75
V1262-65
V1263-75
V1264-90
V1436-75
* Contact factory for additional information regarding specific ratios of alcohol (methyl and/or
ethyl) and gasoline.
Parker Hannifin Corporation O-Ring Division
22
ORD 5712
PARKER
COMPOUND
POLYMER
HARDNESS
COLOR
SERVICE
E1583-70 (63017)
E1549-70 (63447)
EJ150-75 (3077)
E3609-70
EPDM
EPDM
EPDM
EPDM
70
70
75
70
Black
Black
Black
Black
E1028-70
V0680-70
NJ253-70 (7077)
N1219-60
N1220-70
N1069-70
N0508-75
V8545-75
V8562-75
S0802-40
S0317-60
S1138-70
SM150-40 (11354)
SM151-50 (11355)
SM152-60 (11356)
SM153-70 (11357)
S0355-75
EPDM
FKM
NBR
NBR
NBR
NBR
NBR
FFKM
FFKM
VMQ
VMQ
VMQ
VMQ
VMQ
VMQ
VMQ
VMQ
70
70
70
60
70
70
75
75
75
40
60
70
40
50
60
70
75
Black
Red
Black
Black
Black
Black
Black
Black
White
White
Rust
Rust
Rust
Rust
Rust
Rust
Rust
NSF 51
NSF 51
FDA, USP Class VI
NSF 51, FDA,
USP Class VI
FDA
NSF 51, FDA, USDA
FDA
NSF 51, FDA
NSF 51, FDA
FDA
FDA, USDA
FDA
FDA
FDA
FDA, USDA
FDA
FDA
FDA
FDA
FDA
FDA, USDA
23
MATERIAL OFFERING
The Food and Drug Administration (FDA) has established a list of rubber
compounding ingredients which tests have indicated are neither toxic nor
carcinogenic. Rubber compounds produced entirely from those ingredients
and which also pass the FDA extraction tests are said to "meet the FDA
requirements." The FDA does not approve rubber compounds. It is the
responsibility of the manufacturer to compound food grade materials from the
FDA list of ingredients and establish whether they pass the necessary
extraction requirements.
ORD 5712
WATER
CONTACT
TEMP
PARKER
COMPOUND
POLYMER
SERVICE
E1583-70 (63017)
EPDM
70
Commercial
Hot **
NSF 61 Internally
lubricated, ideal for
high volume
applications
E1561-60 (63446)
EPDM
60
Commercial
Hot **
E1549-70 (63447)
EPDM
70
Commercial
Hot **
E1570-70
EPDM
70
Commercial
Hot **
NSF 61 Internally
lubricated
E1571-70
EPDM
70
Commercial
Hot **
NSF 61
E1244-70
EPDM
70
Commercial
Hot **
NSF 61 Internally
lubricated
E1257-70
EPDM
70
Commercial
Hot **
NSF 61 Chloramine
Resistant
E3609-70
EPDM
70
Commercial
Hot **
EJ151-80 (3958)
EPDM
80
Commercial
Hot **
N1517-70
Nitrile
70
Commercial
Hot **
NSF 61
N1510-70 (67997)
Nitrile
70
Commercial
Hot **
NSF 61
N0757-70
Nitrile
70
Cold
Water***
NSF 61
* NSF 61 listed materials given a commercial hot water rating are also certified for cold water
** Commercial Hot = Tested at 82 C (180 F) (Commercial Hot)
*** Cold Water = Tested at 23 C (73.4 F)
Parker Hannifin Corporation O-Ring Division
24
ORD 5712
Aerospace Materials
AMS(1) and NAS(2) Rubber Specification Descriptions
RUBBER
SPECS
PARKER
COMPOUND DUROMETER
DESCRIPTION
TITLE
N0545-40
35-45
AMS3205
N0299-50
45-55
AMS3208
C0267-50
45-55
AMS3209
C1124-70
65-75
AMS3212
N0525-60
55-65
AMS3220
N0525-60
55-65
AMS3238
B0318-70
65-75
AMS3301
S0469-40
35-45
AMS3302
S0595-50
45-55
AMS3303
S0613-60
55-65
AMS3304
S1224-70
S0604-70
65-75
AMS3305
S0614-80
75-85
AMS3325
L1223-60
LM152-60
55-65
AMS3337
S0383-70
65-75
AMS3345
S0899-50
45-55
Silicone Rubber
AMS3357
S1224-70
S0604-70
65-75
AMS7257
V8545-75,
FF200-75
70-80
AMS7259
V0709-90
85-95
AMS7267
S0355-75
70-80
AMS7271
N0506-65
60-70
(1) Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
(2) National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
25
MATERIAL OFFERING
AMS3201
ORD 5712
PARKER
COMPOUND DUROMETER
DESCRIPTION
TITLE
AMS7272
N0287-70
65-75
AMS7276
V1164-75
V1226-75
V0747-75
70-80
NAS1613
E1267-80,
75-85
AMS-P-5315
N0602-70
65-75
AMS-P-5510
N0507-90
85-95
AMS-R-6855
N0406-60,
C1124-70
55-75
AMS-R-7362
47-071
65-75
AMS-P-25732 N0304-75
70-80
AMS-R-25988 L1223-60,
L1120-70,
L1218-80,
L1077-75
LM152-60
LM153-70
LM154-75
LM155-80
55-85
Rubber, Fluorosilicone
Elastomer, Oil and Fuel Resistant
70-95
AMS-P-83461 N0756-75
70-80
AMS-R-83485 V0835-75
70-80
AMS-R-83248 V1164-75,
V1226-75,
V0747-75
V0709-90
(1) Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
(2) National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
Parker Hannifin Corporation O-Ring Division
26
ORD 5712
PARKER
COMPOUND
DESCRIPTION
Rubber, Silicone
Class
Grade
Temperature Range(1)
50
1a. 1b
70
2a. 2b
80
2a. 2b
70
MIL-G-1149C -
Type I
Class 1
MIL-R-3533B -
C0267-50
Rubber, Synthetic; Sheet, Strip and Molded
(-20 to 158F) (-29 to 70C) (1)
Type I
Grade B
MIL-P-5315B -
N0602-70
Packing, O-ring, Hydrocarbon Fuel Resistant (Jet Fuels) (Military
O-ring series MS29512 and MS29513)
N0602-70 (-65 to 160F) (-54 to 71C)
MIL-P-5510C -
MIL-R-6855D -
Class 1 Grade 60
(1) These temperatures are limits for particular tests required by the specifications, but they do not necessarily
represent operating temperature limits.
Parker Hannifin Corporation O-Ring Division
27
MATERIAL OFFERING
ZZ-R-765E
ORD 5712
RUBBER
SPECS
MIL-R-7362D -
PARKER
COMPOUND
DESCRIPTION
Types I, II
47-071
N0674-70
Class II
S0604-70
(1) These temperatures are limits for particular tests required by the specifications, but they do not necessarily
represent operating temperature limits.
28
ORD 5712
Engineering
Tools
29
ENGINEERING TOOLS
ORD 5712
5 6 7 8 9 100
4
3
90
90
5 6 7 8 9 10
80
90
80
80
5%
10%
30%
20%
Percent Compression
40%
.1
.2
.3
50
60
70
60
50
.4 .5 .6 .7.8.91
70
60
50
70
90
50
80
60
70
50
60
90
70
80
Sh
or
e
Ha
rd
ne
ss
5 6 7 8 9 1000
30
ORD 5712
ENGINEERING TOOLS
Parker Hannifin Corporation O-Ring Division
31
ORD 5712
5 6 7 8 9 100
3
90
90
80
5 6 7 8 9 10
60
70
90
80
80
50
70
60
90
80
50
70
60
90
80
70
5%
.2
50
.3
60
50
10%
30%
20%
Percent Compression
40%
.1
60
70
.4 .5 .6 .7.8.91
50
Sh
or
e
Ha
rd
ne
ss
5 6 7 8 9 1000
32
ORD 5712
ENGINEERING TOOLS
Parker Hannifin Corporation O-Ring Division
33
ORD 5712
5 6 7 8 9 100
90
90
80
50
60
70
Ha
rd
ne
ss
3
4
.1
5%
10%
30%
20%
Percent Compression
40%
.2
.3
.4 .5 .6 .7.8.91
50
60
70
80
50
60
70
90
80
5 6 7 8 9 10
50
60
90
70
50
60
80
70
Sh
or
e
80
90
5 6 7 8 9 1000
34
ORD 5712
Extrusion
ENGINEERING TOOLS
Reduce the clearance shown by 60% when using silicone or fluorosilicone elastomers.
1.
2.
3.
4.
5.
35
ORD 5712
Engineering
Design
Notes
36
ORD 5712
Gland
Designs
37
GLAND DESIGNS
Parker offers O-rings for use in static as well as dynamic sealing applications.
Static seals are those where the mating parts of the gland do not have
movement relative to each other. These seals include face, radial, dovetail.
Examples of these seals and the corresponding design charts are found on
pages 38-43. Dynamic seals include reciprocating, floating pneumatic,
oscillating, and rotary applications. Dynamic seals are defined by one of the
gland parts having movement relative to the other part. Gland design
recommendations for a reciprocating seal are provided on pages 44 and 45.
ORD 5712
0 to 5
(Typ.)
Break Corners
Approx. .005 RAD.
X
R
63
63
Surface finish X:
32 for liquids
16 for vacuum
and gases
Groove
Depth
(= Gland Depth)
I.D.
G
Gland Detail
Finishes are RMS values
(R f
Ch
A4 2 b l
Section W-W
W
.005
Max.
W
I.D.
.003 Max.
38
ORD 5712
G
Groove Width
Gland
Depth
Actual
Liquids
Vacuum
and Gases
Groove
Radius
004
through
050
1/16
.070
.003
.050
to
.054
.013
to
.023
19
to
32
.101
to
.107
.084
to
.089
.005
to
.015
102
through
178
3/32
.103
.003
.074
to
.080
.020
to
.032
20
to
30
.136
to
.142
.120
to
.125
.005
to
.015
201
through
284
1/8
.139
.004
.101
to
.107
.028
to
.042
20
to
30
.177
to
.187
.158
to
.164
.010
to
.025
309
through
395
3/16
.210
.005
.152
to
.162
.043
to
.063
21
to
30
.270
to
.290
.239
to
.244
.020
to
.035
425
through
475
1/4
.275
.006
.201
to
.211
.058
to
.080
21
to
29
.342
to
.362
.309
to
.314
.020
to
.035
Special
3/8
.375
.007
.276
to
.286
.082
to
.108
22
to
28
.475
to
.485
.419
to
.424
.030
to
.045
Special
1/2
.500
.008
.370
to
.380
.112
to
.138
22
to
27
.638
to
.645
.560
to
.565
.030
to
.045
Squeeze
39
GLAND DESIGNS
O-Ring
W
Size
Cross Section
Parker
No. 2-Size
AS568B Nominal
Actual
40
L Gland
Depth
F Groove
Depth (Ref.)
1/2 E
Gland Detail
63
32
32
Break Corners
Approx. .005 RAD.
63
(e)
0 to 5
(Typ.)
1/2 E
I.D.
Section W-W
.003 Typ.
.005
Typ.
Male Gland
No
Parbak
Ring
Pressure
One
Parbak
Ring
G1
Pressure
1/2 E
Female Gland
Two
Parbak
Rings
G2
Pressure
ORD 5712
15
to
21
15
to
20
309
.210 .170 .032
through 3/16 .005 to
to
395
.173 .045
425
.275 .226 .040
through 1/4 .006 to
to
475
.229 .055
R
Groove
E (a)
G - Groove Width
Diametral No Parbak 1 Parbak 2 Parbak
.005
.004
.003
.002
.002
tricity (b)
Max.
Eccen-
(d) For ease of assembly, when Parbaks are used, gland depth may be increased up to 5%.
(c) Reduce maximum diametral clearance 50% when using silicone or fluorosilicone O-rings.
(b) Total indicator reading between groove and adjacent bearing surface.
GLAND DESIGNS
41
(a) Clearance (extrusion gap) must be held to a minimum consistent with design requirements for temperature range variation.
16
to
23
201
.139 .111 .022
through 1/8 .004 to
to
284
.113 .032
Actual
17
to
24
Depth
Squeeze
102
.103 .081 .017
through 3/32 .003 to
to
178
.083 .025
Actual
L
Gland
22
to
32
Nomin.
W
Cross-Section
004
.070 .050 .015
through 1/16 .003 to
to
050
.052 .023
AS568A-
O-Ring
2-Size
ORD 5712
ORD 5712
G
(to sharp
corner)
L
66
R1
Mean Groove
Diameter Coincides
With Mean
O-ring Diameter.
NOTE: Parker offers dovetail cutters for various sizes. For more information, contact a
Parker O-Ring applications engineer.
42
ORD 5712
W
Cross Section
L
Gland
Depth
Nominal
Actual
004
through
050
1/16
.070
.003
.050
to
.052
102
through
178
3/32
.103
.003
201
through
284
1/8
309
through
395
Squeeze
%
G
Gland Width
(To sharp
corner)
R1
27
.055
to
.059
.005 1/64
.081
to
.083
21
.083
to
.087
.010 1/64
.139
.004
.111
to
.113
20
.113
to
.117
.010 1/32
3/16
.210
.005
.171
to
.173
18
.171
to
.175
.015 1/32
425
through
475
1/4
.275
.006
.231
to
.234
16
.231
to
.235
.015 1/16
Special
3/8
.375
.007
.315
to
.319
16
.315
to
.319
.020 3/32
43
GLAND DESIGNS
44
0 to 5
(Typ.)
Gland
Depth
F Groove
Depth (Ref.)
Surface Finish X:
32 Without Parbak Ring
63 With Parbak Ring
32
16
Break Corners
Approx. .005 Rad.
1/2E
Gland Detail
I.D.
.003 Typ.
Section W-W
.005
Typ.
Piston Gland
No
Parbak
Ring
Pressure
Rod Gland
One
Parbak
Ring
G1
Pressure
Two
Parbak
Rings
G2
Pressure
ORD 5712
L
Gland
11
to
16
R
Groove
Max.
Eccen-
.005
.004
.003
.002
.002
tricity (b)
(c) O-rings not listed are not recommended for reciprocating applications.
(b) Total indicator reading between groove and adjacent bearing surface.
(a) Clearance (extrusion gap) must be held to a minimum consistent with design requirements for temperature range variation.
425
.275 .237 .029
through 1/4 .006 to
to
460
.240 .044
8
to
14
9
to
16
201
.139 .121 .012
through 1/8 .004 to
to
222
.123 .022
E (a)
G - Groove Width
Diametral No Parbak 1 Parbak 2 Parbak
GLAND DESIGNS
45
309
.210 .185 .017
through 3/16 .005 to
to
349
.188 .030
10
to
17
Squeeze
Actual
104
.103 .088 .010
through 3/32 .003 to
to
116
.090 .018
Depth
15
to
25
Actual
W
Cross-Section
Nomin.
006
.070 .055 .010
through 1/16 .003 to
to
012
.057 .018
AS568B-
O-Ring
2-Size
ORD 5712
ORD 5712
Gland
Design
Notes
46
ORD 5712
Sizing
Charts
The following charts provide dimensions for standard shrinkage materials only.
These correspond to AS568B dimensions. O-Rings manufactured from
compounds with different shrinkage rates will provide slightly different
dimensions and tolerances when standard tooling is used. Custom tooling
may be necessary for some compounds in order to meet AS568B dimensions
and tolerances. For further information contact a Parker O-Ring applications
engineer.
SIZING CHARTS
Parker Hannifin Corporation O-Ring Division
47
ORD 5712
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
Parker
No.
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-001*
2-002*
2-003*
2-004
2-005
2-006
2-007
2-008
2-009
2-010
2-011
2-012
2-013
2-014
2-015
2-016
2-017
2-018
2-019
2-020
2-021
2-022
2-023
2-024
2-025
.029
.042
.056
.070
.101
.114
.145
.176
.208
.239
.301
.364
.426
.489
.551
.614
.676
.739
.801
.864
.926
.989
1.051
1.114
1.176
.004
.004
.004
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.007
.009
.009
.009
.009
.009
.009
.010
.010
.010
.011
0,74
1,07
1,42
1,78
2,57
2,90
3,68
4,47
5,28
6,07
7,65
9,25
10,82
12,42
14,00
15,60
17,17
18,77
20,35
21,95
23,52
25,12
26,70
28,30
29,87
0,10
0,10
0,10
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,18
0,23
0,23
0,23
0,23
0,23
0,23
0,25
0,25
0,25
0,28
2-026
2-027
2-028
2-029
2-030
2-031
2-032
2-033
2-034
2-035
2-036
2-037
2-038
2-039
2-040
2-041
2-042
2-043
2-044
2-045
2-046
2-047
2-048
2-049
2-050
1.239
1.301
1.364
1.489
1.614
1.739
1.864
1.989
2.114
2.239
2.364
2.489
2.614
2.739
2.864
2.989
3.239
3.489
3.739
3.989
4.239
4.489
4.739
4.989
5.239
.011
.011
.013
.013
.013
.015
.015
.018
.018
.018
.018
.018
.020
.020
.020
.024
.024
.024
.027
.027
.030
.030
.030
.037
.037
31,47
33,05
34,65
37,82
41,00
44,17
47,35
50,52
53,70
56,87
60,05
63,22
66,40
69,57
72,75
75,92
82,27
88,62
94,97
101,32
107,67
114,02
120,37
126,72
133,07
0,28
0,28
0,33
0,33
0,33
0,38
0,38
0,46
0,46
0,46
0,46
0,46
0,51
0,51
0,51
0,61
0,61
0,61
0,69
0,69
0,76
0,76
0,76
0,94
0,94
(a) The rubber compound must be added when ordering by the 2-size number
(i.e., N0674 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY.
These correspond to AS568B dimensions. O-rings manufactured out of compounds
with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see Parker O-Ring
Handbook ORD 5700.
* Please note: for 2-001 cross-section width = .040 in (1,02 mm)
for 2-002 cross-section width = .050 in (1,27 mm)
for 2-003 cross-section width = .060 in (1,52 mm)
48
ORD 5712
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-102
2-103
2-104
2-105
2-106
2-107
2-108
2-109
2-110
2-111
2-112
2-113
2-114
2-115
2-116
2-117
2-118
2-119
2-120
2-121
2-122
2-123
2-124
2-125
2-126
2-127
2-128
2-129
2-130
2-131
2-132
2-133
2-134
2-135
2-136
2-137
2-138
2-139
2-140
.049
.081
.112
.143
.174
.206
.237
.299
.362
.424
.487
.549
.612
.674
.737
.799
.862
.924
.987
1.049
1.112
1.174
1.237
1.299
1.362
1.424
1.487
1.549
1.612
1.674
1,737
1,799
1.862
1.925
1.987
2.050
2.112
2.175
2.237
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.007
.009
.009
.009
.010
.010
.010
.010
.010
.010
.012
.012
.012
.012
.012
.012
.015
.015
.015
.015
.015
.015
.017
.017
.017
.017
.017
.017
1,24
2,06
2,84
3,63
4,42
5,23
6,02
7,59
9,19
10,77
12,37
13,94
15,54
17,12
18,72
20,30
21,89
23,47
25,07
26,64
28,24
29,82
31,42
32,99
34,59
36,17
37,77
39,34
40,94
42,52
44,12
45,69
47,29
48,90
50,47
52,07
53,64
55,25
56,82
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,18
0,23
0,23
0,23
0,25
0,25
0,25
0,25
0,25
0,25
0,30
0,30
0,30
0,30
0,30
0,30
0,38
0,38
0,38
0,38
0,38
0,38
0,43
0,43
0,43
0,43
0,43
0,43
Parker
No.
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-141
2-142
2-143
2-144
2-145
2-146
2-147
2-148
2-149
2-150
2-151
2-152
2-153
2-154
2-155
2-156
2-157
2-158
2-159
2-160
2-161
2-162
2-163
2-164
2-165
2-166
2-167
2-168
2-169
2-170
2-171
2-172
2-173
2-174
2-175
2-176
2-177
2-178
2.300
2.362
2.425
2.487
2.550
2.612
2.675
2.737
2.800
2.862
2.987
3.237
3.487
3.737
3.987
4.237
4.487
4.737
4.987
5.237
5.487
5.737
5.987
6.237
6.487
6.737
6.987
7.237
7.487
7.737
7.987
8.237
8.487
8.737
8.987
9.237
9.487
9.737
.020
.020
.020
.020
.020
.020
.022
.022
.022
.022
.024
.024
.024
.028
.028
.030
.030
.030
.035
.035
.035
.035
.035
.040
.040
.040
.040
.045
.045
.045
.045
.050
.050
.050
.050
.055
.055
.055
58,42
59,99
61,60
63,17
64,77
66,34
67,95
69,52
71,12
72,69
75,87
82,22
88,57
94,92
101,27
107,62
113,97
120,32
126,67
133,02
139,37
145,72
152,07
158,42
164,77
171,12
177,47
183,82
190,17
196,52
202,87
209,22
215,57
221,92
228,27
234,62
240,97
247,32
0,51
0,51
0,51
0,51
0,51
0,51
0,56
0,56
0,56
0,56
0,61
0,08
0,61
0,71
0,71
0,76
0,76
0,76
0,89
0,89
0,89
0,89
0,89
1,02
1,02
1,02
1,02
1,14
1,14
1,14
1,14
1,27
1,27
1,27
1,27
1,40
1,40
1,40
49
SIZING CHARTS
Parker
No.
ORD 5712
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
Parker
No.
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-201
2-202
2-203
2-204
2-205
2-206
2-207
2-208
2-209
2-210
2-211
2-212
2-213
2-214
2-215
2-216
2-217
2-218
2-219
2-220
2-221
2-222
2-223
2-224
2-225
2-226
2-227
2-228
2-229
2-230
2-231
2-232
2-233
2-234
2-235
.171
.234
.296
.359
.421
.484
.546
.609
.671
.734
.796
.859
.921
.984
1.046
1.109
1.171
1.234
1.296
1.359
1.421
1.484
1.609
1.734
1.859
1.984
2.109
2.234
2.359
2.484
2.609
2.734
2.859
2.984
3.109
.055
.005
.005
.005
.005
.005
.007
.009
.010
.010
.010
.010
.010
.010
.010
.012
.012
.012
.012
.012
.012
.015
.015
.015
.018
.018
.018
.020
.020
.020
.020
.024
.024
.024
.024
4,34
5,94
7,52
9,12
10,69
12,29
13,87
15,47
17,04
18,64
20,22
21,82
23,39
24,99
26,5
28,17
29,74
31,34
32,92
34,52
36,09
37,69
40,87
44,04
47,22
50,39
53,57
56,74
59,92
63,09
66,27
69,44
72,62
75,79
78,97
0,13
0,13
0,13
0,13
0,13
0,13
0,18
0,23
0,23
0,25
0,25
0,25
0,25
0,25
0,25
0,30
0,30
0,30
0,30
0,30
0,30
0,38
0,38
0,38
0,46
0,46
0,46
0,51
0,51
0,51
0,51
0,6
0,61
0,61
0,61
2-236
2-237
2-238
2-239
2-240
2-241
2-242
2-243
2-244
2-245
2-246
2-247
2-248
2-249
2-250
2-251
2-252
2-253
2-254
2-255
2-256
2-257
2-258
2-259
2-260
2-261
2-262
2-263
2-264
2-265
2-266
2-267
2-268
2-269
2-270
3.234
3.359
3.484
3.609
3.734
3.859
3.984
4.109
4.234
4.359
4.484
4.609
4.734
4.859
4.984
5.109
5.234
5.359
5.484
5.609
5.734
5.859
5.984
6.234
6.484
6.734
6.984
7.234
7.484
7.734
7.984
8.234
8.484
8.734
8.984
.024
.024
.024
.028
.028
.028
.028
.028
.030
.030
.030
.030
.030
.035
.035
.035
.035
.035
.035
.035
.035
.035
.035
.040
.040
.040
.040
.045
.045
.045
.045
.050
.050
.050
.050
82,14
85,32
88,49
91,67
94,84
98,02
101,19
104,37
107,54
110,72
113,89
117,07
120,24
23,42
126,59
129,77
132,94
136,12
139,29
142,47
145,64
148,82
151,99
158,34
164,69
171,04
177,39
183,74
190,09
196,44
202,79
209,14
215,49
221,84
228,19
0,61
0,61
0,61
0,71
0,71
0,71
0,71
0,71
0,76
0,76
0,76
0,76
0,76
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0,89
0,89
1,02
1,02
1,02
1,02
1,14
1,14
1,14
1,14
1,27
1,27
1,27
1,27
50
ORD 5712
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
Parker
No.
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-271
2-272
2-273
2-274
2-275
2-276
2-277
9.234
9.484
9.734
9.984
10.484
10.984
11.484
.055
.055
.055
.055
.055
.065
.065
234,54
240,89
247,24
253,59
266,29
278,99
291,69
1,40
1,40
1,40
1,40
1,40
1,65
1,65
2-278
2-279
2-280
2-281
2-282
2-283
2-284
11.984
12.984
13.984
14.984
15.955
16.955
17.955
.065
.065
.065
.065
.075
.080
.085
304,39
329,79
355,19
380,59
405,26
430,66
456,06
1,65
1,65
1,65
1,65
1,91
2,03
2,16
SIZING CHARTS
Parker Hannifin Corporation O-Ring Division
51
ORD 5712
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
Parker
No.
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-309
2-310
2-311
2-312
2-313
2-314
2-315
2-316
2-317
2-318
2-319
2-320
2-321
2-322
2-323
2-324
2-325
2-326
2-327
2-328
2-329
2-330
2-331
2-332
2-333
2-334
2-335
2-336
2-337
2-338
2-339
2-340
2-341
2-342
2-343
.412
.475
.537
.600
.662
.725
.787
.850
.912
.975
1.037
1.100
1.162
1.225
1.287
1.350
1.475
1.600
1.725
1.850
1.975
2.100
2.225
2.350
2.475
2.600
2.725
2.850
2.975
3.100
3.225
3.350
3.475
3.600
3.725
.005
.005
.007
.009
.009
.010
.010
.010
.010
.010
.010
.012
.012
.012
.012
.012
.015
.015
.015
.015
.018
.018
.018
.018
.020
.020
.020
.020
.024
.024
.024
.024
.024
.028
.028
10,46
12,07
13,64
15,24
16,81
18,42
19,99
21,59
23,16
24,77
26,34
27,94
29,51
31,12
32,69
34,29
37,47
40,64
43,82
46,99
50,17
53,34
56,52
59,69
62,87
66,04
69,22
72,39
75,57
78,74
81,92
85,09
88,27
91,44
94,62
0,13
0,13
0,18
0,23
0,23
0,25
0,25
0,25
0,25
0,25
0,25
0,30
0,30
0,3
0,30
0,30
0,38
0,38
0,38
0,38
0,46
0,46
0,46
0,46
0,51
0,51
0,51
0,51
0,61
0,61
0,6
0,61
0,61
0,71
0,71
2-344
2-345
2-346
2-347
2-348
2-349
2-350
2-351
2-352
2-353
2-354
2-355
2-356
2-357
2-358
2-359
2-360
2-361
2-362
2-363
2-364
2-365
2-366
2-367
2-368
2-369
2-370
2-371
2-372
2-373
2-374
2-375
2-376
2-377
2-378
3.850
3.975
4.100
4.225
4.350
4.475
4.600
4.725
4.850
4.975
5.100
5.225
5.350
5.475
5.600
5.725
5.850
5.975
6.225
6.475
6.725
6.975
7.225
7.475
7.725
7.975
8.225
8.475
8.725
8.975
9.225
9.475
9.725
9.975
10.475
.028
.028
.028
.030
.030
.030
.030
.030
.030
.037
.037
.037
.037
.037
.037
.037
.037
.037
.040
.040
.040
.040
.045
.045
.045
.045
.050
.050
.050
.050
.055
.055
.055
.055
.060
97,79
100,97
104,14
107,32
110,49
113,67
116,84
120,02
123,19
126,37
129,54
132,72
135,89
139,07
142,24
145,42
148,59
151,77
158,12
164,47
170,82
177,17
183,52
189,87
196,22
202,57
208,92
215,27
221,62
227,97
234,32
240,67
247,02
253,37
266,07
0,71
0,71
0,71
0,76
0,76
0,76
0,76
0,76
0,76
0,94
0,94
0,94
0,94
0,94
0,94
0,94
0,94
0,94
1,02
1,02
1,02
1,02
1,14
1,14
1,14
1,14
1,27
1,27
1,27
1,27
1,40
1,40
1,40
1,40
1,52
52
ORD 5712
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-379
2-380
2-381
2-382
2-383
2-384
2-385
2-386
2-387
10.975
11.475
11.975
12.975
13.975
14.975
15.955
16.955
17.955
.060
.065
.065
.065
.070
.070
.075
.080
.085
278,77
291,47
304,17
329,57
354,97
380,37
405,26
430,66
456,06
1,52
1,65
1,65
1,65
1,78
1,78
1,91
2,03
2,16
Parker
No.
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-388
2-389
2-390
2-391
2-392
2-393
2-394
2-395
18.955
19.955
20.955
21.955
22.940
23.940
24.940
25.940
.090
.095
.095
.100
.105
.110
.115
.120
481,41
506,81
532,21
557,61
582,68
608,08
633,48
658,88
2,29
2,41
2,41
2,54
2,67
2,79
2,92
3,05
SIZING CHARTS
Parker Hannifin Corporation O-Ring Division
53
ORD 5712
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-425
2-426
2-427
2-428
2-429
2-430
2-431
2-432
2-433
2-434
2-435
2-436
2-437
2-438
2-439
2-440
2-441
2-442
2-443
2-444
2-445
2-446
2-447
2-448
2-449
2-450
4.475
4.600
4.725
4.850
4.975
5.100
5.225
5.350
5.475
5.600
5.725
5.850
5.975
6.225
6.475
6.725
6.975
7.225
7.475
7.725
7.975
8.475
8.975
9.475
9.975
10.475
.033
.033
.033
.033
.037
.037
.037
.037
.037
.037
.037
.037
.037
.040
.040
.040
.040
.045
.045
.045
.045
.055
.055
.055
.055
.060
113,67
116,84
120,02
123,19
126,37
129,54
132,72
135,89
139,07
142,24
145,42
148,59
151,77
158,12
164,47
170,82
177,17
183,52
189,87
196,22
202,57
215,27
227,97
240,67
253,37
266,07
0,84
0,84
0,84
0,84
0,94
0,94
0,94
0,94
0,94
0,94
0,94
0,94
0,94
1,02
1,02
1,02
1,02
1,14
1,14
1,14
1,14
1,40
1,40
1,40
1,40
1,52
Parker
No.
Inside
dia.
in.
Tol.
in.
Inside
dia.
mm
Tol.
mm
2-451
2-452
2-453
2-454
2-455
2-456
2-457
2-458
2-459
2-460
2-461
2-462
2-463
2-464
2-465
2-466
2-467
2-468
2-469
2-470
2-471
2-472
2-473
2-474
2-475
10.975
11.475
11.975
12.475
12.975
13.475
13.975
14.475
14.975
15.475
15.955
16.455
16.955
17.455
17.955
18.455
18.955
19.455
19.955
20.955
21.955
22.940
23.940
24.940
25.940
.060
.060
.060
.060
.060
.070
.070
.070
.070
.070
.075
.075
.080
.085
.085
.085
.090
.090
.095
.095
.100
.105
.110
.115
.120
278,77
291,47
304,17
316,87
329,57
342,27
354,97
367,67
380,37
393,07
405,26
417,96
430,66
443,36
456,06
468,76
481,46
494,16
506,86
532,26
557,66
582,68
608,08
633,48
658,88
1,52
1,52
1,52
1,52
1,52
1,78
1,78
1,78
1,78
1,78
1,91
1,91
2,03
2,16
2,16
2,16
2,29
2,29
2,41
2,41
2,54
2,67
2,79
2,92
3,05
54
ORD 5712
The following charts provide dimensions for standard shrinkage materials only.
These correspond to AS568B dimensions. O-Rings manufactured from
compounds with different shrinkage rates will provide slightly different
dimensions and tolerances when standard tooling is used. Custom tooling may
be necessary for some compounds in order to meet AS568B dimensions and
tolerances. Contact a Parker O-Ring applications engineer with any questions.
3-9XX Sizes
Parker
No.
ID
In.
Tol.
In.
Width
In.
Tol.
In.
ID
mm
Tol.
mm
Width
mm
Tol.
mm
3-901
3-902
3-903
3-904
3-905
3-906
3-907
3-908
3-909
3-910
3-911
3-912
3-913
3-914
3-916
3-918
3-920
3-924
3-928
3-932
.185
.239
.301
.351
.414
.468
.530
.644
.706
.755
.863
.924
.986
1.047
1.171
1.355
1.475
1.720
2.090
2.337
.005
.005
.005
.005
.005
.005
.007
.009
.009
.009
.009
.009
.010
.010
.010
.012
.014
.014
.018
.018
.056
.064
.064
.072
.072
.078
.082
.087
.097
.097
.116
.116
.116
.116
.116
.116
.118
.118
.118
.118
.003
.003
.003
.003
.003
.003
.003
.003
.003
.003
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
4,70
6,07
7,65
8,92
10,52
11,89
13,46
16,36
17,93
19,18
21,92
23,47
25,04
26,59
29,74
34,42
37,47
43,69
53,09
59,36
0,13
0,13
0,13
0,13
0,13
0,13
0,18
0,23
0,23
0,23
0,23
0,23
0,26
0,26
0,26
0,30
0,36
0,36
0,46
0,46
1,42
1,63
1,63
1,83
1,83
1,98
2,08
2,21
2,46
2,46
2,95
2,95
2,95
2,95
2,95
2,95
3,00
3,00
3,00
3,00
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,10
0,10
0,10
0,10
0,10
0,10
0,10
1,10
0,10
0,10
(a)
(b)
The rubber compound must be added when ordering by the 3-size number (i.e., N0552 3-910).
Material with unusual shrinkage during molding will give slightly different dimensions.
O-Rings for Metric Tube Fittings (ISO 6149) (Similar to SAE J2244)
Parker O-Ring Division is tooled in these sizes for Nitrile Rubber only
Port
Thread
M8 ISO O-Ring
M10 ISO O-Ring
M12 ISO O-Ring
M14 ISO O-Ring
M16 ISO O-Ring
M18 ISO O-Ring
M22 ISO O-Ring
M27 ISO O-Ring
M33 ISO O-Ring
M42 ISO O-Ring
M48 ISO O-Ring
M60 ISO O-Ring
Parker
Part No.
0024-0063
0031-9063
0036-6087
0044-5087
0052-4087
0060-2087
0076-0087
0092-9114
0116-5114
0152-0114
0175-6114
0222-8114
ID
mm
Tol.
mm
W
mm
Tol.
mm
6,10
8,10
9,30
11,30
13,30
15,30
19,30
23,60
29,60
38,60
44,60
56,60
0,13
0,13
0,13
0,13
0,15
0,18
0,20
0,23
0,30
0,36
0,41
0,46
1,60
1,60
2,20
2,20
2,20
2,20
2,20
2,90
2,90
2,90
2,90
2,90
0,08
0,08
0,08
0,08
0,08
0,08
0,08
0,10
0,10
0,10
0,10
0,10
55
SIZING CHARTS
M8x1
M10x1
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M22x1.5
M27x2
M33x2
M42x2
M48x2
M60x2
O-Ring
Name
ORD 5712
5-XXX Sizes
Parker
No.
5-118
5-187
5-051
5-101
5-578
5-632
5-102
5-178
5-683
5-646
5-103
5-190
5-579
5-669
5-148
5-105
5-106
5-580
5-193
5-108
5-124
5-107
5-125
5-581
5-685
5-582
ID
In.
0.059
0.070
0.070
0.100
0.102
0.110
0.116
0.120
0.122
0.126
0.128
0.132
0.133
0.146
0.154
0.154
0.154
0.165
0.176
0.176
0.176
0.176
0.180
0.192
0.208
0.224
Tol.
In.
0.004
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
Width
In.
0.040
0.036
0.040
0.038
0.074
0.040
0.038
0.040
0.063
0.040
0.050
0.070
0.074
0.040
0.038
0.050
0.066
0.074
0.040
0.050
0.056
0.066
0.040
0.074
0.094
0.074
Tol.
In.
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
ID
mm
Tol.
mm
1.50
1.78
1.78
2.54
2.59
2.79
2.95
3.05
3.10
3.20
3.25
3.35
3.39
3.71
3.91
3.91
3.91
4.19
4.47
4.47
4.47
4.47
4.57
4.88
5.28
5.69
0.10
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
Width
mm
1.02
0.91
1.02
0.97
1.88
1.02
0.97
1.02
1.60
1.02
1.27
1.78
1.88
1.02
0.97
1.27
1.68
1.88
1.02
1.27
1.42
1.68
1.02
1.88
2.39
1.88
Tol.
mm
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
56
ORD 5712
5-XXX Sizes
Parker
No.
0.228
0.233
0.239
0.239
0.239
0.239
0.242
0.248
0.248
0.251
0.265
0.270
0.278
0.283
0.283
0.287
0.290
0.301
0.301
0.301
0.305
0.312
0.312
0.312
0.313
0.314
0.320
0.322
0.326
0.330
0.332
0.344
0.350
0.350
Tol.
In.
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
Width
In.
0.040
0.076
0.040
0.051
0.074
0.174
0.040
0.048
0.094
0.074
0.139
0.070
0.046
0.040
0.074
0.094
0.045
0.025
0.038
0.054
0.074
0.036
0.092
0.103
0.051
0.074
0.070
0.070
0.103
0.050
0.031
0.070
0.074
0.106
Tol.
In.
0.003
0.003
0.003
0.003
0.003
0.005
0.003
0.003
0.003
0.003
0.004
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.004
ID
mm
Tol.
mm
5.79
5.92
6.07
6.07
6.07
6.07
6.15
6.30
6.30
6.38
6.73
6.86
7.06
7.19
7.19
7.29
7.39
7.65
7.65
7.65
7.75
7.92
7.92
7.92
7.95
7.98
8.13
8.18
8.28
8.38
8.43
8.74
8.89
8.89
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
Width
mm
1.02
1.93
1.02
1.30
1.88
4.42
1.02
1.22
2.39
1.88
3.53
1.78
1.17
1.02
1.88
2.39
1.14
0.64
0.97
1.37
1.88
0.91
2.34
2.62
1.30
1.88
1.78
1.78
2.62
1.27
0.79
1.78
1.88
2.69
Tol.
mm
0.08
0.08
0.08
0.08
0.08
0.13
0.08
0.08
0.08
0.08
0.10
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.10
57
SIZING CHARTS
5-194
5-638
5-179
5-151
5-127
5-1002
5-197
5-180
5-686
5-583
5-200
5-052
5-202
5-698
5-584
5-687
5-1004
5-152
5-056
5-710
5-673
5-204
5-205
5-160
5-712
5-585
5-664
5-1006
5-206
5-1007
5-133
5-612
5-586
5-587
ID
In.
ORD 5712
5-XXX Sizes
Parker
No.
5-018
5-699
5-700
5-716
5-057
5-209
5-211
5-212
5-614
5-718
5-134
5-588
5-002
5-215
5-218
5-682
5-058
5-613
5-1011
5-222
5-223
5-225
5-615
5-725
5-652
5-726
5-566
5-230
5-231
5-675
5-616
5-1014
5-135
5-590
ID
In.
0.352
0.353
0.354
0.362
0.364
0.370
0.375
0.384
0.391
0.395
0.410
0.413
0.416
0.418
0.425
0.426
0.426
0.437
0.447
0.455
0.458
0.469
0.469
0.470
0.473
0.484
0.489
0.500
0.501
0.508
0.516
0.525
0.526
0.535
Tol.
In.
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.007
0.007
0.007
Width
In.
0.113
0.094
0.118
0.118
0.045
0.040
0.187
0.070
0.103
0.040
0.031
0.106
0.059
0.094
0.025
0.040
0.050
0.070
0.103
0.128
0.053
0.094
0.103
0.270
0.071
0.056
0.055
0.125
0.062
0.049
0.103
0.071
0.031
0.106
Tol.
In.
0.004
0.003
0.004
0.004
0.003
0.003
0.005
0.003
0.003
0.003
0.003
0.004
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.004
0.003
0.003
0.003
0.006
0.003
0.003
0.003
0.004
0.003
0.003
0.003
0.003
0.003
0.004
ID
mm
8.94
8.97
8.99
9.19
9.25
9.40
9.53
9.75
9.93
10.03
10.41
10.49
10.57
10.62
10.80
10.82
10.82
11.10
11.35
11.56
11.63
11.91
11.91
11.94
12.01
12.29
12.42
12.70
12.73
12.90
13.11
13.34
13.36
13.59
Tol.
mm
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.18
0.18
0.18
Width
mm
2.87
2.39
3.00
3.00
1.14
1.02
4.75
1.78
2.62
1.02
0.79
2.69
1.50
2.39
0.64
1.02
1.27
1.78
2.62
3.25
1.35
2.39
2.62
6.86
1.80
1.42
1.40
3.18
1.57
1.24
2.62
1.80
0.79
2.69
Tol.
mm
0.10
0.08
0.10
0.10
0.08
0.08
0.13
0.08
0.08
0.08
0.08
0.10
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.10
0.08
0.08
0.15
0.15
0.08
0.08
0.08
0.10
0.08
0.08
0.08
0.08
0.08
0.10
58
ORD 5712
5-XXX Sizes
Parker
No.
0.547
0.554
0.562
0.570
0.575
0.583
0.583
0.590
0.594
0.600
0.600
0.603
0.604
0.610
0.623
0.625
0.625
0.627
0.631
0.640
0.643
0.650
0.652
0.660
0.660
0.665
0.687
0.707
0.709
0.720
0.722
0.724
0.725
0.744
Tol.
In.
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.008
0.008
0.008
0.008
0.008
0.008
0.008
Width
In.
0.051
0.070
0.062
0.106
0.060
0.040
0.103
0.070
0.106
0.094
0.105
0.125
0.103
0.058
0.125
0.050
0.103
0.062
0.062
0.080
0.031
0.045
0.070
0.064
0.141
0.106
0.250
0.103
0.079
0.141
0.113
0.106
0.040
0.109
Tol.
In.
0.003
0.003
0.003
0.004
0.003
0.003
0.003
0.003
0.004
0.003
0.004
0.004
0.003
0.003
0.004
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.004
0.004
0.006
0.003
0.003
0.004
0.004
0.004
0.003
0.004
ID
mm
13.89
14.07
14.27
14.48
14.61
14.81
14.81
14.99
15.09
15.24
15.24
15.32
15.34
15.49
15.82
15.88
15.88
15.93
16.03
16.26
16.33
16.51
16.56
16.76
16.76
16.89
17.45
17.96
18.01
18.29
18.34
18.39
18.42
18.90
Tol.
mm
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.20
0.20
0.20
0.20
0.20
0.20
0.20
Width
mm
1.30
1.78
1.57
2.69
1.52
1.02
2.62
1.78
2.69
2.39
2.67
3.18
2.62
1.47
3.18
1.27
2.62
1.57
1.57
2.03
0.79
1.14
1.78
1.63
3.58
2.69
6.35
2.62
2.01
3.58
2.87
2.69
1.02
2.77
Tol.
mm
0.08
0.08
0.08
0.10
0.08
0.08
0.08
0.08
0.10
0.08
0.10
0.10
0.08
0.08
0.10
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.10
0.10
0.15
0.08
0.08
0.10
0.10
0.10
0.08
0.10
59
SIZING CHARTS
5-001
5-162
5-236
5-239
5-156
5-563
5-735
5-736
5-591
5-609
5-242
5-021
5-243
5-676
5-247
5-248
5-617
5-250
5-251
5-005
5-136
5-643
5-252
5-254
5-743
5-592
5-745
5-256
5-1017
5-594
5-257
5-593
5-181
5-964
ID
In.
ORD 5712
5-XXX Sizes
Parker
No.
5-263
5-264
5-266
5-137
5-595
5-006
5-751
5-003
5-596
5-708
5-753
5-049
5-273
5-022
5-138
5-597
5-598
5-278
5-139
5-709
5-677
5-279
5-761
5-618
5-599
5-004
5-763
5-600
5-140
5-601
5-290
5-291
5-1028
5-602
ID
In.
0.750
0.752
0.766
0.775
0.779
0.796
0.820
0.836
0.838
0.850
0.857
0.871
0.879
0.890
0.898
0.905
0.968
0.979
0.987
1.000
1.004
1.004
1.010
1.016
1.031
1.070
1.080
1.094
1.112
1.153
1.180
1.186
1.190
1.212
Tol.
In.
0.008
0.008
0.008
0.008
0.008
0.008
0.009
0.009
0.009
0.009
0.009
0.009
0.009
0.009
0.009
0.009
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.012
0.012
0.012
0.012
0.012
Width
In.
0.061
0.070
0.080
0.031
0.141
0.080
0.150
0.059
0.141
0.045
0.123
0.140
0.040
0.125
0.031
0.141
0.141
0.103
0.031
0.055
0.081
0.218
0.062
0.139
0.141
0.065
0.050
0.141
0.031
0.141
0.210
0.070
0.250
0.141
Tol.
In.
0.003
0.003
0.003
0.003
0.004
0.003
0.005
0.003
0.004
0.003
0.004
0.004
0.003
0.004
0.003
0.004
0.004
0.003
0.003
0.003
0.003
0.005
0.003
0.004
0.004
0.003
0.003
0.004
0.003
0.004
0.005
0.003
0.006
0.004
ID
mm
19.05
19.10
19.46
19.69
19.79
20.22
20.83
21.23
21.29
21.59
21.77
22.12
22.33
22.61
22.81
22.99
24.59
24.87
25.07
25.40
25.50
25.50
25.65
25.81
26.19
27.18
27.43
27.79
28.24
29.29
29.97
30.12
30.23
30.78
Tol.
mm
0.20
0.20
0.20
0.20
0.20
0.20
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.30
0.30
0.30
Width
mm
1.55
1.78
2.03
0.79
3.58
2.03
3.81
1.50
3.58
1.14
3.12
3.56
1.02
3.18
0.79
3.58
3.58
2.62
0.79
1.40
2.06
5.54
1.57
3.53
3.58
1.65
1.27
3.58
0.79
3.58
5.33
1.78
6.35
3.58
Tol.
mm
0.08
0.08
0.08
0.08
0.10
0.08
0.13
0.08
0.10
0.08
0.10
0.10
0.08
0.10
0.08
0.10
0.10
0.08
0.08
0.08
0.08
0.13
0.08
0.10
0.10
0.08
0.08
0.10
0.08
0.10
0.13
0.08
0.15
0.10
60
ORD 5712
5-XXX Sizes
Parker
No.
1.213
1.225
1.226
1.229
1.230
1.259
1.279
1.338
1.342
1.401
1.412
1.421
1.436
1.437
1.450
1.454
1.465
1.468
1.475
1.515
1.540
1.550
1.553
1.559
1.591
1.559
1.640
1.670
1.670
1.671
1.674
1.680
1.687
1.765
Tol.
In.
0.012
0.012
0.012
0.012
0.012
0.012
0.012
0.012
0.012
0.014
0.014
0.014
0.014
0.014
0.014
0.014
0.014
0.014
0.014
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.016
Width
In.
0.149
0.275
0.031
0.070
0.197
0.092
0.141
0.092
0.141
0.141
0.073
0.080
0.063
0.070
0.047
0.105
0.103
0.141
0.275
0.125
0.070
0.092
0.080
0.139
0.071
0.139
0.139
0.047
0.070
0.139
0.210
0.080
0.139
0.125
Tol.
In.
0.004
0.006
0.003
0.003
0.005
0.003
0.004
0.003
0.004
0.004
0.003
0.003
0.003
0.003
0.003
0.004
0.003
0.004
0.006
0.004
0.003
0.003
0.003
0.004
0.003
0.004
0.004
0.003
0.003
0.004
0.005
0.003
0.004
0.004
ID
mm
30.81
31.12
31.14
31.22
31.24
31.98
32.49
33.99
34.09
35.59
35.86
36.09
36.47
36.40
36.83
36.93
37.21
37.29
37.47
38.48
39.12
39.37
39.45
39.60
40.41
40.61
41.66
42.42
42.42
42.44
42.52
42.67
42.85
44.83
Tol.
mm
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.36
0.36
0.36
0.36
0.36
0.36
0.36
0.36
0.36
0.36
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.41
Width
mm
3.78
6.99
0.79
1.78
5.00
2.34
3.58
2.34
3.58
3.58
1.85
2.03
1.60
1.78
1.19
2.67
2.62
3.58
6.99
3.18
1.78
2.34
2.03
3.53
1.80
3.53
3.53
1.19
1.78
3.53
5.33
2.03
3.53
3.18
Tol.
mm
0.10
0.15
0.08
0.08
0.13
0.08
0.10
0.08
0.10
0.10
0.08
0.08
0.08
0.08
0.08
0.10
0.08
0.10
0.15
0.10
0.08
0.08
0.08
0.10
0.08
0.10
0.10
0.08
0.08
0.10
0.13
0.08
0.10
0.10
61
SIZING CHARTS
5-294
5-295
5-141
5-296
5-297
5-301
5-603
5-157
5-604
5-605
5-780
5-008
5-309
5-670
5-142
5-312
5-657
5-606
5-980
5-024
5-320
5-158
5-009
5-321
5-788
5-034
5-327
5-143
5-329
5-1018
5-330
5-671
5-332
5-025
ID
In.
ORD 5712
5-XXX Sizes
Parker
No.
5-035
5-1023
5-335
5-794
5-1042
5-795
5-981
5-011
5-337
5-1043
5-144
5-796
5-338
5-701
5-342
5-343
5-655
5-037
5-346
5-642
5-1044
5-027
5-1046
5-145
5-347
5-348
5-800
5-1047
5-015
5-702
5-039
5-354
5-355
5-805
ID
In.
1.786
1.788
1.802
1.812
1.817
1.850
1.850
1.860
1.873
1.882
1.891
1.913
1.925
1.937
1.980
2.000
2.020
2.036
2.046
2.051
2.060
2.140
2.140
2.141
2.163
2.172
2.225
2.281
2.296
2.312
2.411
2.471
2.524
2.535
Tol.
In.
0.016
0.016
0.016
0.016
0.016
0.016
0.016
0.016
0.016
0.017
0.017
0.017
0.017
0.017
0.017
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.020
0.020
0.020
0.020
0.020
0.020
0.020
Width
In.
0.139
0.070
0.062
0.070
0.257
0.070
0.275
0.080
0.062
0.118
0.047
0.070
0.210
0.139
0.038
0.075
0.070
0.139
0.139
0.070
0.139
0.125
0.315
0.047
0.062
0.070
0.275
0.093
0.080
0.139
0.139
0.070
0.103
0.070
Tol.
In.
0.004
0.003
0.003
0.003
0.006
0.003
0.006
0.003
0.003
0.004
0.003
0.003
0.005
0.004
0.003
0.003
0.003
0.004
0.004
0.003
0.004
0.004
0.010
0.003
0.003
0.003
0.006
0.003
0.003
0.004
0.004
0.003
0.003
0.003
ID
mm
45.36
45.42
45.77
46.02
46.15
46.99
46.99
47.24
47.57
47.80
48.03
48.59
48.90
49.20
50.29
50.80
51.31
51.71
51.97
52.10
52.32
54.36
54.36
54.38
54.94
55.17
56.52
57.94
58.32
58.72
61.24
62.76
64.11
64.39
Tol.
mm
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.43
0.43
0.43
0.43
0.43
0.43
0.46
0.46
0.46
0.46
0.46
0.46
0.46
0.46
0.46
0.46
0.46
0.46
0.51
0.51
0.51
0.51
0.51
0.51
0.51
Width
mm
3.53
1.78
1.57
1.78
6.53
1.78
6.99
2.03
1.57
3.00
1.19
1.78
5.33
3.53
0.97
1.91
1.78
3.53
3.53
1.78
3.53
3.18
8.00
1.19
1.57
1.78
6.99
2.36
2.03
3.53
3.53
1.78
2.62
1.78
Tol.
mm
0.10
0.08
0.08
0.08
0.15
0.08
0.15
0.08
0.08
0.10
0.08
0.08
0.13
0.10
0.08
0.08
0.08
0.10
0.10
0.08
0.10
0.10
0.25
0.08
0.08
0.08
0.15
0.08
0.08
0.10
0.10
0.08
0.08
0.08
62
ORD 5712
5-XXX Sizes
Parker
No.
2.563
2.576
2.671
2.683
2.725
2.782
2.812
2.846
2.878
2.924
2.937
2.975
3.020
3.036
3.037
3.041
3.060
3.080
3.112
3.125
3.130
3.156
3.161
3.162
3.210
3.225
3.300
3.350
3.354
3.363
3.443
3.475
3.600
3.603
Tol.
In.
0.020
0.020
0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.024
0.026
0.026
0.026
0.026
0.026
0.026
0.026
0.026
Width
In.
0.139
0.082
0.139
0.115
0.275
0.103
0.139
0.139
0.080
0.103
0.139
0.275
0.103
0.139
0.103
0.062
0.112
0.111
0.070
0.103
0.100
0.060
0.139
0.070
0.103
0.275
0.070
0.275
0.070
0.155
0.275
0.275
0.275
0.220
Tol.
In.
0.004
0.003
0.004
0.004
0.006
0.003
0.004
0.004
0.003
0.003
0.004
0.006
0.003
0.004
0.003
0.003
0.004
0.004
0.003
0.003
0.003
0.003
0.004
0.003
0.003
0.006
0.003
0.006
0.003
0.005
0.006
0.006
0.006
0.005
ID
mm
65.10
65.43
67.84
68.15
69.22
70.66
71.42
72.29
73.10
74.27
74.60
75.57
76.71
77.11
77.14
77.24
77.72
78.23
79.04
79.38
79.50
80.16
80.29
80.31
81.53
81.92
83.82
85.09
85.19
85.42
87.45
88.27
91.44
91.52
Tol.
mm
0.51
0.51
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.56
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.61
0.66
0.66
0.66
0.66
0.66
0.66
0.66
0.66
Width
mm
3.53
2.08
3.53
2.92
6.99
2.62
3.53
3.53
2.03
2.62
3.53
6.99
2.62
3.53
2.62
1.57
2.84
2.82
1.78
2.62
2.54
1.52
3.53
1.78
2.62
6.99
1.78
6.99
1.78
3.94
6.99
6.99
6.99
5.59
Tol.
mm
0.10
0.08
0.10
0.10
0.15
0.08
0.10
0.10
0.08
0.08
0.10
0.15
0.08
0.10
0.08
0.08
0.10
0.10
0.08
0.08
0.08
0.08
0.10
0.08
0.08
0.15
0.08
0.15
0.08
0.13
0.15
0.15
0.15
0.13
63
SIZING CHARTS
5-703
5-358
5-361
5-159
5-982
5-807
5-704
5-042
5-697
5-367
5-705
5-983
5-368
5-044
5-369
5-810
5-811
5-1052
5-374
5-557
5-813
5-815
5-045
5-816
5-819
5-984
5-821
5-825
5-1053
5-380
5-979
5-381
5-985
5-385
ID
In.
ORD 5712
5-XXX Sizes
Parker
No.
5-031
5-828
5-986
5-390
5-987
5-831
5-1054
5-833
5-394
5-988
5-395
5-396
5-989
5-060
5-836
5-401
5-1060
5-840
5-842
5-843
5-844
5-402
5-848
5-850
5-403
5-851
5-852
5-853
5-559
5-407
5-408
5-410
5-412
5-855
ID
In.
3.640
3.661
3.725
3.957
3.975
4.020
4.080
4.085
4.096
4.100
4.117
4.171
4.225
4.390
4.427
4.531
4.609
4.630
4.664
4.674
4.682
4.750
4.875
4.925
4.930
4.984
5.030
5.057
5.236
5.249
5.265
5.340
5.414
5.444
Tol.
In.
0.028
0.028
0.028
0.028
0.028
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.033
0.033
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
0.035
Width
In.
0.125
0.090
0.275
0.147
0.275
0.147
0.209
0.103
0.070
0.275
0.070
0.070
0.275
0.044
0.140
0.070
0.150
0.139
0.122
0.103
0.140
0.188
0.060
0.260
0.103
0.147
0.210
0.233
0.214
0.123
0.139
0.070
0.103
0.124
Tol.
In.
0.004
0.003
0.006
0.004
0.006
0.004
0.005
0.003
0.003
0.006
0.003
0.003
0.006
0.003
0.004
0.003
0.004
0.004
0.004
0.003
0.004
0.005
0.003
0.006
0.003
0.004
0.005
0.006
0.005
0.004
0.004
0.003
0.003
0.004
Tol.
mm
ID
mm
92.46
92.99
94.62
100.51
100.97
102.11
103.63
103.76
104.04
104.14
104.57
105.94
107.32
111.51
112.45
115.09
117.07
117.60
118.47
118.72
118.92
120.65
123.83
125.10
125.22
126.59
127.76
128.45
133.00
133.32
133.73
135.64
137.52
138.28
0.71
0.71
0.71
0.71
0.71
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.84
0.84
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
0.89
Width
mm
3.18
2.29
6.99
3.73
6.99
3.73
5.31
2.62
1.78
6.99
1.78
1.78
6.99
1.12
3.56
1.78
3.81
3.53
3.10
2.62
3.56
4.78
1.52
6.60
2.62
3.73
5.33
5.92
5.44
3.12
3.53
1.78
2.62
3.15
Tol.
mm
0.10
0.08
0.15
0.10
0.15
0.10
0.13
0.08
0.08
0.15
0.08
0.08
0.15
0.08
0.10
0.08
0.10
0.10
0.10
0.08
0.10
0.13
0.08
0.15
0.08
0.10
0.13
0.15
0.13
0.10
0.10
0.08
0.08
0.10
64
ORD 5712
5-XXX Sizes
Parker
No.
5.465
5.475
5.487
5.500
5.553
5.604
5.616
5.750
5.789
5.815
5.875
5.882
5.968
5.985
6.023
6.350
6.361
6.482
6.520
6.609
6.850
7.108
7.110
7.139
7.230
7.425
7.580
7.613
7.640
7.674
7.802
8.015
8.277
8.350
Tol.
In.
0.035
0.035
0.035
0.035
0.035
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.045
0.045
0.045
0.045
0.045
0.045
0.045
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
Width
In.
0.070
0.164
0.062
0.168
0.120
0.070
0.127
0.070
0.252
0.140
0.103
0.110
0.070
0.070
0.103
0.275
0.108
0.170
0.070
0.139
0.275
0.275
0.103
0.072
0.070
0.260
0.210
0.070
0.125
0.210
0.104
0.187
0.275
0.275
Tol.
In.
0.003
0.005
0.003
0.005
0.004
0.003
0.004
0.003
0.006
0.004
0.003
0.004
0.003
0.003
0.003
0.006
0.004
0.005
0.003
0.004
0.006
0.006
0.003
0.003
0.003
0.006
0.005
0.003
0.004
0.005
0.003
0.005
0.006
0.006
Tol.
mm
ID
mm
138.81
139.07
139.37
139.70
141.05
142.34
142.65
146.05
147.04
147.70
149.23
149.40
151.59
152.02
152.98
161.29
161.57
164.64
165.61
167.87
173.99
180.54
180.59
181.33
183.64
188.60
192.53
193.37
194.06
194.92
198.17
203.58
210.24
212.09
0.89
0.89
0.89
0.89
0.89
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.14
1.14
1.14
1.14
1.14
1.14
1.14
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
Width
mm
1.78
4.17
1.57
4.27
3.05
1.78
3.23
1.78
6.40
3.56
2.62
2.79
1.78
1.78
2.62
6.99
2.74
4.32
1.78
3.53
6.99
6.99
2.62
1.83
1.78
6.60
5.33
1.78
3.18
5.33
2.64
4.75
6.99
6.99
Tol.
mm
0.08
0.13
0.08
0.13
0.10
0.08
0.10
0.08
0.15
0.10
0.08
0.10
0.08
0.08
0.08
0.15
0.10
0.13
0.08
0.10
0.15
0.15
0.08
0.08
0.08
0.15
0.13
0.08
0.10
0.13
0.08
0.13
0.15
0.15
65
SIZING CHARTS
5-856
5-413
5-414
5-858
5-416
5-062
5-417
5-063
5-862
5-863
5-969
5-421
5-573
5-567
5-1041
5-064
5-428
5-430
5-666
5-869
5-871
5-434
5-696
5-691
5-873
5-975
5-875
5-438
5-439
5-876
5-877
5-442
5-445
5-880
ID
In.
ORD 5712
5-XXX Sizes
Parker
No.
5-971
5-575
5-450
5-882
5-635
5-454
5-883
5-884
5-885
5-886
5-457
5-458
5-887
5-165
5-889
5-976
5-890
5-623
5-464
5-656
5-891
5-466
5-469
5-893
5-471
5-894
5-474
5-898
5-476
5-069
5-478
5-576
5-900
5-480
ID
In.
8.590
8.875
9.071
9.162
9.370
9.565
9.820
9.984
10.171
10.178
10.232
10.340
10.343
10.359
10.372
10.425
10.606
10.630
10.656
10.702
10.734
10.749
10.883
10.945
10.995
10.996
11.331
11.335
11.562
11.750
11.860
12.000
12.000
12.017
Tol.
In.
0.050
0.055
0.055
0.055
0.055
0.055
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.070
0.070
0.070
0.070
0.070
0.070
Width
In.
0.139
0.070
0.062
0.210
0.103
0.103
0.103
0.070
0.139
0.112
0.139
0.139
0.275
0.139
0.104
0.260
0.103
0.139
0.070
0.070
0.139
0.210
0.103
0.071
0.149
0.103
0.275
0.103
0.275
0.139
0.139
0.159
0.187
0.285
Tol.
In.
0.004
0.003
0.003
0.005
0.003
0.003
0.003
0.003
0.004
0.004
0.004
0.004
0.006
0.004
0.003
0.006
0.003
0.004
0.003
0.003
0.004
0.005
0.003
0.003
0.004
0.003
0.006
0.003
0.006
0.004
0.004
0.005
0.005
0.006
Tol.
mm
ID
mm
218.19
225.42
230.40
232.72
238.00
242.95
249.43
253.59
258.34
258.52
259.89
262.64
262.71
263.12
263.45
264.80
269.39
270.00
270.66
271.83
272.64
273.03
276.43
278.00
279.27
279.30
287.81
287.91
293.67
298.45
301.24
304.80
304.80
305.23
1.27
1.40
1.40
1.40
1.40
1.40
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.78
1.78
1.78
1.78
1.78
1.78
Width
mm
3.53
1.78
1.57
5.33
2.62
2.62
2.62
1.78
3.53
2.84
3.53
3.53
6.99
3.53
2.64
6.60
2.62
3.53
1.78
1.78
3.53
5.33
2.62
1.80
3.78
2.62
6.99
2.62
6.99
3.53
3.53
4.04
4.75
7.24
Tol.
mm
0.10
0.08
0.08
0.13
0.08
0.08
0.08
0.08
0.10
0.10
0.10
0.10
0.15
0.10
0.08
0.15
0.08
0.10
0.08
0.08
0.10
0.10
0.08
0.08
0.10
0.10
0.15
0.08
0.15
0.10
0.10
0.13
0.13
0.15
66
ORD 5712
5-XXX Sizes
Parker
No.
12.109
12.160
12.234
12.250
12.260
12.299
12.360
12.380
12.463
12.475
12.623
12.705
12.725
12.840
12.900
12.915
13.002
13.248
13.270
13.375
13.410
13.460
13.490
13.541
13.601
13.616
13.650
13.718
13.734
13.750
13.820
14.088
14.111
14.234
Tol.
In.
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.070
0.080
0.080
0.080
0.080
Width
In.
0.139
0.210
0.139
0.150
0.139
0.137
0.210
0.139
0.103
0.139
0.140
0.070
0.275
0.139
0.159
0.139
0.139
0.139
0.139
0.210
0.139
0.210
0.139
0.210
0.139
0.141
0.139
0.275
0.139
0.103
0.139
0.210
0.139
0.139
Tol.
In.
0.004
0.005
0.004
0.005
0.004
0.004
0.005
0.004
0.003
0.004
0.004
0.003
0.006
0.004
0.005
0.004
0.004
0.004
0.004
0.005
0.004
0.005
0.004
0.005
0.004
0.004
0.004
0.006
0.004
0.003
0.004
0.005
0.004
0.004
Tol.
mm
ID
mm
307.57
308.86
310.74
311.15
311.40
312.39
313.94
314.45
316.56
316.87
320.62
322.71
323.22
326.14
327.66
328.04
330.25
336.50
337.06
339.73
340.61
341.88
342.65
343.94
345.47
345.85
346.71
348.44
348.84
349.25
351.03
357.84
358.42
361.54
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
2.03
2.03
2.03
2.03
Width
mm
3.53
5.33
3.53
3.81
3.53
3.48
5.33
3.53
2.62
3.53
3.56
1.78
6.99
3.53
4.04
3.53
3.53
3.53
3.53
5.33
3.53
5.33
3.53
5.33
3.53
3.58
3.53
6.99
3.53
2.62
3.53
5.33
3.53
3.53
Tol.
mm
0.10
0.13
0.10
0.13
0.10
0.10
0.13
0.10
0.08
0.10
0.10
0.08
0.15
0.10
0.13
0.10
0.10
0.10
0.10
0.13
0.10
0.13
0.10
0.13
0.10
0.10
0.10
0.15
0.10
0.08
0.10
0.13
0.10
0.10
67
SIZING CHARTS
5-482
5-164
5-901
5-484
5-485
5-486
5-902
5-487
5-488
5-569
5-905
5-906
5-907
5-908
5-611
5-619
5-570
5-492
5-070
5-910
5-071
5-072
5-493
5-494
5-495
5-496
5-498
5-500
5-912
5-1097
5-073
5-502
5-624
5-074
ID
In.
ORD 5712
5-XXX Sizes
Parker
No.
5-916
5-504
5-626
5-505
5-506
5-507
5-508
5-166
5-920
5-921
5-922
5-512
5-076
5-077
5-924
5-925
5-079
5-515
5-516
5-517
5-518
5-571
5-930
5-520
5-522
5-080
5-524
5-622
5-525
5-081
5-935
5-526
5-082
5-528
ID
In.
14.369
14.430
14.470
14.470
14.570
14.600
14.674
14.722
14.780
14.795
14.990
15.171
15.260
15.300
15.410
15.465
15.540
15.548
15.740
15.750
16.031
16.234
16.285
16.435
16.507
16.575
16.640
16.750
16.765
16.830
17.100
17.250
17.250
17.268
Tol.
In.
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
Width
In.
0.278
0.139
0.087
0.139
0.141
0.210
0.139
0.139
0.175
0.071
0.104
0.139
0.210
0.139
0.210
0.188
0.139
0.210
0.139
0.275
0.256
0.139
0.250
0.139
0.225
0.187
0.210
0.275
0.125
0.210
0.275
0.187
0.240
0.242
Tol.
In.
0.006
0.004
0.003
0.004
0.004
0.005
0.004
0.004
0.005
0.003
0.003
0.004
0.005
0.004
0.005
0.005
0.004
0.005
0.004
0.006
0.006
0.004
0.006
0.004
0.006
0.005
0.005
0.006
0.004
0.005
0.006
0.005
0.006
0.006
Tol.
mm
ID
mm
364.97
366.52
367.54
367.54
370.08
370.84
372.72
373.94
375.41
375.79
380.75
385.34
387.60
388.62
391.41
392.81
394.72
394.92
399.80
400.05
407.19
412.34
413.64
417.45
419.28
421.01
422.66
425.45
425.83
427.48
434.34
438.15
438.15
438.61
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.03
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
Width
mm
7.06
3.53
2.21
3.53
3.58
5.33
3.53
3.53
4.45
1.80
2.64
3.53
5.33
3.53
5.33
4.78
3.53
5.33
3.53
6.99
6.50
3.53
6.35
3.53
5.72
4.75
5.33
6.99
3.18
5.33
6.99
4.75
6.10
6.15
Tol.
mm
0.15
0.10
0.08
0.10
0.10
0.13
0.10
0.10
0.13
0.08
0.08
0.10
0.13
0.10
0.13
0.13
0.10
0.13
0.10
0.15
0.15
0.10
0.15
0.10
0.15
0.13
0.13
0.15
0.10
0.13
0.15
0.13
0.15
0.15
68
ORD 5712
5-XXX Sizes
Parker
No.
17.390
17.455
17.500
17.870
17.875
17.910
18.062
18.169
18.265
18.350
18.405
18.500
18.635
18.870
18.880
19.310
19.380
19.437
19.500
19.580
19.725
19.960
20.020
20.180
20.609
21.180
21.564
22.360
23.406
23.540
23.576
23.612
23.780
24.875
Tol.
In.
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.120
0.120
0.120
0.120
0.120
0.120
Width
In.
0.139
0.139
0.139
0.210
0.187
0.139
0.281
0.096
0.210
0.210
0.210
0.188
0.139
0.275
0.139
0.140
0.139
0.375
0.250
0.210
0.210
0.139
0.275
0.125
0.139
0.147
0.139
0.132
0.281
0.139
0.139
0.275
0.375
0.250
Tol.
In.
0.004
0.004
0.004
0.005
0.005
0.004
0.006
0.003
0.005
0.005
0.005
0.005
0.004
0.006
0.004
0.004
0.004
0.007
0.006
0.005
0.005
0.004
0.006
0.004
0.004
0.004
0.004
0.004
0.006
0.004
0.004
0.006
0.007
0.006
Tol.
mm
ID
mm
441.71
443.36
444.50
453.90
454.03
454.91
458.77
461.49
463.93
466.09
467.49
469.90
473.33
479.30
479.55
490.47
492.25
493.70
495.30
497.33
501.02
506.98
508.51
512.57
523.47
537.97
547.73
567.94
594.51
597.92
598.83
599.74
604.01
631.82
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.29
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
3.05
3.05
3.05
3.05
3.05
3.05
Width
mm
3.53
3.53
3.53
5.33
4.75
3.53
7.16
2.44
5.33
5.33
5.33
4.78
3.53
6.99
3.53
3.56
3.53
9.52
6.35
5.33
5.33
3.53
6.99
3.18
3.53
3.73
3.53
3.35
7.14
3.53
3.53
6.99
9.52
6.35
Tol.
mm
0.10
0.10
0.10
0.13
0.13
0.10
0.15
0.08
0.13
0.13
0.13
0.13
0.10
0.15
0.10
0.10
0.10
0.18
0.15
0.13
0.13
0.10
0.15
0.10
0.10
0.10
0.10
0.10
0.15
0.10
0.10
0.15
0.18
0.15
69
SIZING CHARTS
5-937
5-529
5-1100
5-939
5-621
5-083
5-084
5-533
5-1102
5-085
5-534
5-1104
5-1105
5-943
5-944
5-946
5-947
5-540
5-541
5-086
5-948
5-950
5-087
5-1019
5-1010
5-088
5-547
5-953
5-089
5-551
5-090
5-552
5-167
5-168
ID
In.
ORD 5712
5-XXX Sizes
Parker
No.
5-169
5-091
5-170
5-171
5-173
5-631
5-172
5-092
5-955
ID
In.
25.153
25.474
25.500
26.125
26.188
26.408
27.485
27.625
28.801
Tol.
In.
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.140
Width
In.
0.214
0.139
0.275
0.275
0.210
0.139
0.275
0.275
0.275
Tol.
In.
0.005
0.004
0.006
0.006
0.005
0.004
0.006
0.006
0.006
Tol.
mm
ID
mm
638.89
647.04
647.70
663.58
665.18
670.76
698.12
701.68
731.55
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.56
Width
mm
5.44
3.53
6.99
6.99
5.33
3.53
6.99
6.99
6.99
Tol.
mm
0.13
0.10
0.15
0.15
0.13
0.10
0.15
0.15
0.15
70
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
R
.010
T
(Ref.)
A
In.
Tol.
W
In.
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
.096
.127
.140
.171
.202
.234
.265
.327
.390
.455
.518
.580
.643
.705
.768
.830
.893
.955
1.018
1.080
1.143
.005
.087
.049
.045
.003
.053
.003
.005
.007
.009
.009
.010
.010
.010
1. Parbak sizes are designed to correspond with the Parker 2-xxx, 3-xxx and
AS568B series O-ring with which they are used.
2. Complete call-out consists of the digit 8, the dash number for the size wanted
and the rubber material.
Example: N0300 8-009.
Parker Hannifin Corporation O-Ring Division
71
SIZING CHARTS
Notes:
Tol.
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
1.205
1.268
1.330
1.393
1.518
1.643
1.768
1.893
2.018
2.143
2.268
2.393
2.518
2.643
2.768
2.893
3.018
3.268
3.518
3.768
4.018
4.268
4.518
4.768
5.018
5.268
.011
.011
.011
.013
.013
.013
.015
.015
.018
102
103
104
105
106
107
108
109
110
111
112
113
114
115
.077
.109
.140
.171
.202
.234
.265
.327
.390
.452
.515
.577
.640
.702
.005
.018
.200
.200
.200
.240
.024
.024
.027
.027
.030
.030
.030
.037
.037
R
.010
Tol.
Ref.
A
In.
Tol.
Width
In.
.087
.087
.049
.049
.045
.045
.003
.003
.053
.053
.087
.049
.053
.129
.053
.086
Tol.
.003
.003
.005
.007
.009
.009
72
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
.765
.831
.893
.956
1.018
1.081
1.143
1.206
1.268
1.331
1.393
1.456
1.518
1.581
1.643
1.706
1.768
1.831
1.893
1.956
2.018
2.081
2.143
2.206
2.268
2.331
2.393
2.456
2.518
2.581
2.643
2.706
2.768
2.831
2.893
3.018
3.268
3.518
3.768
4.018
4.268
.009
.100
R
.010
Tol.
Ref.
A
In.
Tol.
Width
In.
.129
.129
.053
.053
.045
.045
.003
.003
.086
.086
Tol.
.010
.012
.012
.015
.003
.003
.015
.017
.017
.020
SIZING CHARTS
.020
.022
.022
.022
.022
.024
.024
.024
.028
.028
.030
73
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
R
.010
Tol.
Ref.
A
In.
Tol.
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
4.518
4.768
5.018
5.268
5.518
5.768
6.018
6.268
6.518
6.768
7.018
7.268
7.518
7.768
8.018
8.268
8.518
8.768
9.018
9.268
9.518
9.768
.030
.030
.035
.035
.035
.035
.035
.040
.040
.040
.040
.045
.045
.045
.045
.050
.050
.050
.050
.055
.055
.055
.129
.053
.045
.086
.003
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
.202
.265
.327
.390
.455
.518
.580
.643
.705
.766
.828
.891
.953
1.016
1.078
1.141
1.203
1.266
.005
.174
.050
.040
.118
.004
.005
.005
.007
.009
.009
.010
.174
.174
.050
.050
.040
.040
.118
.118
.004
.004
.003
.003
Width
In.
Tol.
.010
.010
.012
74
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
1.334
1.397
1.459
1.522
1.647
1.772
1.897
2.022
2.147
2.272
2.397
2.522
2.631
2.756
2.881
3.006
3.131
3.256
3.381
3.506
3.631
3.756
3.881
4.006
4.131
4.256
4.381
4.506
4.631
4.768
4.893
5.018
5.143
5.268
5.393
5.518
5.643
5.768
5.893
6.018
6.268
.012
.012
.012
.015
.015
.015
.018
.018
.018
.020
.020
.020
.020
.024
R
.010
Tol.
Ref.
A
In.
Tol.
Width
In.
Tol.
.024
.028
.028
.030
.030
.035
SIZING CHARTS
.035
.040
75
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
R
.010
Tol.
Ref.
A
In.
Tol.
Width
In.
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
6.518
6.768
7.018
7.268
7.518
7.768
8.018
8.268
8.518
8.768
9.018
9.268
9.518
9.768
10.018
10.518
11.018
11.518
12.018
13.018
14.018
15.018
15.989
16.989
17.989
.040
.040
.040
.045
.045
.045
.045
.050
.050
.050
.050
.055
.055
.055
.055
.055
.065
.174
.174
.174
.050
.050
.050
.040
.040
.040
.003
.003
.003
.118
.118
.118
.004
.004
.004
.174
.050
.040
.003
.118
.004
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
.450
.513
.575
.638
.700
.763
.825
.888
.950
1.013
1.075
1.138
1.200
1.263
1.316
.005
.005
.007
.009
.009
.010
.262
.076
.060
.004
.183
.005
.065
.075
.080
.085
Tol.
.010
.012
.012
.012
.012
76
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
1.388
1.513
1.638
1.763
1.888
2.013
2.138
2.268
2.393
2.518
2.643
2.768
2.893
3.018
3.143
3.273
3.398
3.523
3.648
3.773
3.898
4.028
4.153
4.278
4.403
4.528
4.653
4.778
4.903
5.028
5.153
5.278
5.403
5.528
5.653
5.778
5.903
6.028
6.278
6.528
6.778
.012
.015
.015
.015
.015
.018
.018
.018
.018
.020
.020
.020
.020
.024
.024
.024
.024
.024
.028
R
.010
Tol.
Ref.
A
In.
Tol.
Width
In.
.262
.262
.076
.076
.060
.060
.004
.004
.183
.183
Tol.
.005
.005
.028
.030
.030
.037
.037
.037
.037
SIZING CHARTS
.037
.040
.040
.040
77
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
R
.010
Tol.
Ref.
A
In.
Tol.
Width
In.
Tol.
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
7.028
7.278
7.528
7.778
8.028
8.278
8.528
8.778
9.028
9.278
9.528
9.778
10.028
10.528
11.028
11.528
12.028
13.028
14.028
15.028
16.008
17.008
18.008
19.006
20.006
21.006
22.006
22.993
23.993
24.993
25.993
.040
.045
.045
.045
.045
.050
.050
.050
.050
.055
.055
.055
.055
.060
.060
.065
.065
.065
.070
.070
.075
.080
.085
.090
.095
.095
.100
.105
.110
.115
.120
.262
.076
.060
.004
.183
.005
425
426
427
428
429
430
431
432
433
4.551
4.676
4.801
4.926
5.051
5.176
5.301
5.426
5.551
.033
.033
.033
.033
.037
.344
.117
.096
.005
.236
.006
78
ORD 5712
8-XXX Sizes
Parker
No.
ID
In.
Tol.
R
.010
Tol.
Ref.
A
In.
Tol.
Width
In.
Tol.
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
5.676
5.801
5.926
6.051
6.274
6.524
6.774
7.024
7.274
7.524
7.774
8.024
8.524
9.024
9.524
10.024
10.524
11.024
11.524
12.024
12.524
13.024
13.524
14.024
14.524
15.024
15.524
16.004
16.504
17.004
17.504
18.004
18.504
19.004
19.504
20.004
21.004
22.004
23.004
24.004
25.004
26.004
.037
.037
.037
.037
.040
.040
.040
.040
.045
.045
.045
.045
.055
.055
.055
.055
.060
.060
.344
.344
.117
.117
.096
.096
.005
.005
.236
.236
.006
.006
.344
.117
.096
.005
.236
.006
.060
.070
79
SIZING CHARTS
.070
.075
.075
.080
.085
.085
.085
.090
.090
.095
.095
.100
.105
.110
.115
.120
ORD 5712
General
Notes
80
Parker O-Ring
divisions manufacturing
facilities span four continents and nine countries.
Some of these facilities include:
Shanghai (China)
Adro (Italy)
Matamoros (Mexico)
Lexington, KY (USA)
Pleidelsheim (Germany)
Lebanon, TN (USA)
Hifluor, inPHorm, Parofluor and Parofluor ULTRA are trademarks of Parker Hannifin Corporation, Cleveland, OH.