Documente Academic
Documente Profesional
Documente Cultură
M7N
Operating range
Shaft diameter:
d1 = 14 ... 100 mm (0.55 " 3.94 ")
Pressure:
p1 = 25 bar (363 PSI)
Temperature:
t = -50 C ... +220 C
(-58 F ... +428 F)
Sliding velocity:
vg = 20 m/s (66 ft/s)
Features
For plain shafts
Single seal
Unbalanced
Super-Sinus-spring or multiple springs
rotating
Independent of direction of rotation
Variant with PTFE secondary seals for high
chemical resistance (M78N)
Advantages
Universal application opportunities
Efficient stock keeping due to easily
interchangeable faces
Extended selection of materials
Insensitive to low solids contents
Flexibility in torque transmissions
Self cleaning effect
Short installation length possible (G16)
Pumping screw for media with higher
viscosity (M7..F)
Axial movement:
d1 = up to 25 mm: 1.0 mm
d1 = 28 up to 63 mm: 1.5 mm
d1 = from 65 mm: 2.0 mm
Recommended applications
Process industry
Chemical industry
Pulp and paper industry
Water and waste water technology
Shipbuilding
Lube oils
Low solids content media
Water / sewage water pumps
Chemical standard pumps
Vertical screw pumps
Gear wheel feed pumps
Multistage pumps (drive side)
Circulation of printing colors with viscosity
500 ... 15,000 mm2/s.
Materials
Seal face: Special cast CrMo steel (S), Silicon
carbide (Q1, Q2), Aluminium oxide (V)
Seat G9: Carbon graphite antimony
impregnated (A), Carbon graphite resin
impregnated (B), Silicon carbide (Q1*, Q2*)
Seat G4: Silicon carbide (Q1*, Q2*)
Seat G6: Silicon carbide (Q1*, Q2*)
Seat G13: Carbon graphite antimony
impregnated (A), Carbon graphite resin
impregnated (B)
Secondary seals: EPDM (E), NBR (P), FKM (V),
FFKM (K)
Springs: CrNiMo steel (G) Metal parts: CrNiMo
steel (G), Duplex (G1)
* Cannot be combined with seal face made of S
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means,
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any
www.eagleburgmann.com
Page 1/6
Seite 2/6
Description
1.1 472
Seal face
1.2 485
Drive collar
1.3 474
Thrust ring
1.4 412.1
O-Ring
1.5 477
Spring
1.6 904
Set screw
Seat (G9)
475
3
412.2
1) d1 > 100 mm: 30
2) d1 > 100 mm: +0.1
3) d1 > 100 mm: H7
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means,
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any
www.eagleburgmann.com
O-Ring
Page 2/6
Seite 3/6
Seat alternatives
G9 (EN 12756)
G4
G6 (EN 12756)
G13
G16
(EN 12756, but l1k is shorter than specified)
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means,
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any
www.eagleburgmann.com
Page 3/6
Seite 4/6
Torque transmissions
Product variants
M74
Dimensions, items and descriptions as for M7N,
but with multiple springs (Item no. 1.5).
Preferably for d1 >100 mm (3.94").
M7F
Shaft diameter d1 = max. 100 mm (3.94")
Dimensions, items and descriptions as for type
M7N, but with pumping screw, dependent on
direction of rotation.
(Viscosity ISO VG10).
M74F
Shaft diameter d1 = 14 ... 200 mm (0.55" ...
7.87")
Dimensions, items and descriptions as for type
M7N, but with multiple springs and pumping
screw, dependent on direction of rotation.
(Viscosity ISO VG10).
M74S2
Shaft diameter: d1 = 28 200 mm (1.10" ...
7,87")
Dimensions, items and descriptions as for type
M7N, but with multiple springs and drive key.
(without item no. 1.6)
M7S2
Shaft diameter d1 = max. 100 mm (3.94").
Dimensions, items and descriptions as for type
M7N, but with drive key.
(without item no. 1.6)
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means,
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any
www.eagleburgmann.com
Page 4/6
Seite 5/6
Dimensions
d1
d3
d6
l11
l12
l13
l28 b
f mx umax.
14*
25
21.0
25.0
20.5
24.6
16
16*
27
23.0
27.0
22.0
28.0
18
7.5 10.0
6.5
7.6
6.6
6 M5
10 1.5 1.2
7.5 11.5
8.5
9.0
6.6
6 M5
10 1.5 1.5
18*
33
27.0
33.0
24.0
30.0
20
8.5 12.5
9.0 10.0
7.5
7 M5
12 1.1 1.5
20*
35
29.0
35.0
29.5
35.0
22
8.5 12.5
8.5
9.5
7.5
7 M5
12 1.1 1.5
22*
37
31.0
37.0
29.5
24*
39
33.0
39.0
32.0
35.0
24
8.5 12.5
8.5
9.5
7.5
7 M5
12 1.5 1.5
38.0
26
8.5 12.5
8.5
9.5
7.5
8 M5
12 1.5 1.5
25*
40
34.0
40.0
32.0
38.0
27
8.5 12.5
8.5
9.5
7.5
8 M5
12 1.5 1.5
28*
43
37.0
43.0
36.0
42.0
30
7.5
8 M6
13 1.5 1.5
30*
45
39.0
32*
47
42.0
45.0
39.2
45.0
32
7.5
8 M6
13 1.5 1.5
48.0
42.2
48.0
34
7.5
8 M6
13 1.5 1.5
33*
48
42.0
48.0
44.2
50.0
35
7.5
8 M6
13 1.5 1.5
35*
38*
50
44.0
50.0
46.2
52.0
37
7.5
8 M6
13 1.5 1.5
55
49.0
56.0
49.2
55.0
40
6 9.0 22.0 14.0 10.0 14.5 11.3 11.5 10.3 1.5 5.0
9.0
8 M6
13 1.5 1.5
40*
57
51.0
58.0
52.2
58.0
42
6 9.0 22.0 14.0 10.0 14.5 11.8 11.5 10.8 1.5 5.0
9.0
8 M6
13 1.5 1.5
43*
60
54.0
61.0
53.3
62.0
45
6 9.0 22.0 14.0 10.0 17.0 13.2 14.3 12.0 2.0 6.0
9.0
8 M6
13 1.5 2.5
45*
62
56.0
63.0
55.3
64.0
47
6 9.0 22.0 14.0 10.0 17.0 12.8 14.3 11.6 2.0 6.0
9.0
8 M6
13 1.5 2.5
48*
65
59.0
66.0
59.7
68.4
50
6 9.0 22.0 14.0 10.0 17.0 12.8 14.3 11.6 2.0 6.0
9.0
8 M6
13 1.5 2.5
50*
67
62.0
70.0
60.8
69.3
52
6 9.0 23.0 15.0 10.5 17.0 12.8 14.3 11.6 2.0 6.0
9.5
8 M6
13 1.5 2.5
53*
70
65.0
73.0
63.8
72.3
55
6 9.0 23.0 15.0 12.0 17.0 13.5 14.3 12.3 2.0 6.0 11.0
8 M6
13 1.5 2.5
55*
72
67.0
75.0
66.5
75.4
57
6 9.0 23.0 15.0 12.0 18.0 14.5 15.3 13.3 2.0 6.0 11.0
8 M6
13 1.5 2.5
58*
79
70.0
78.0
69.5
78.4
60
6 9.0 23.0 15.0 12.0 18.0 14.5 15.3 13.3 2.0 6.0 11.0
9 M8
13 1.9 2.5
60*
81
72.0
80.0
71.5
80.4
62
6 9.0 23.0 15.0 12.0 18.0 14.5 15.3 13.3 2.0 6.0 11.0
9 M8
13 1.9 2.5
63*
84
75.0
83.0
74.5
83.4
65
6 9.0 23.0 15.0 12.0 18.0 14.2 15.3 13.3 2.0 6.0 11.0
9 M8
13 1.9 2.5
65*
86
77.0
85.0
76.5
85.4
67
6 9.0 23.0 15.0 12.0 18.0 14.2 15.3 13.0 2.0 6.0 11.0
9 M8
13 1.9 2.5
68*
89
81.0
90.0
82.7
91.5
70
7 9.0 26.0 18.0 12.5 19.0 14.9 16.0 13.7 2.0 6.0 11.3
9 M8
13 1.9 2.5
70*
91
83.0
92.0
83.0
92.0
72
7 9.0 26.0 18.0 12.5 18.0 14.2 15.3 13.0 2.0 6.0 11.3
9 M8
16 1.9 2.5
75*
99
88.0
97.0
90.2
99.0
7 9.0 26.0 18.0 12.5 18.0 15.2 15.3 14.0 2.0 6.0 11.3
8 10 M8
16 1.9 2.5
95.0 105.0
95.2 104.0
7 9.0 26.2 18.2 13.0 19.0 16.2 16.3 15.0 2.0 6.0 12.0
8 10 M8
16 1.9 2.5
4 100.2 109.0
7 9.0 26.2 18.2 15.0 19.0 16.0 16.3 14.8 2.0 6.0 14.0
8 10 M8
16 1.9 2.5
4 105.2 114.0
7 9.0 26.2 18.2 15.0 19.0 16.0 16.3 14.8 2.0 6.0 14.0 10 10 M8
20 2.3 2.5
4 111.6 120.3
7 9.0 25.2 17.2 15.0 20.0 17.0 17.3 15.8 2.0 6.0 14.0 10 10 M8
20 2.3 2.5
7 9.0 25.2 17.2 15.0 20.0 17.0 17.3 15.8 2.0 6.0 14.0 10 10 M8
20 2.3 2.5
80* 104
d7 d8
d11
d12 d24
ds
l1k
l3
l5 l6
l7
l8
l9
l10
30.0 20.0
10 10 M8
20 2.3
30.0 20.0
10 10 M8
20 2.3
30.0 20.0
10 10 M8
20 2.3
30.0 20.0
10 10 M8
20 2.3
30.0 20.0
10 10 M8
20 2.3
30.0 20.0
10 10 M8
20 2.3
30.0 20.0
10 10 M8
20 2.3
30.0 20.0
10 10 M8
20 2.3
30.0 20.0
10 10 M8
20 2.3
32.0 22.0
10 10 M8
20 2.3
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means,
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any
www.eagleburgmann.com
Page 5/6
Seite 6/6
34.0 24.0
12 12 M8
24 2.1
34.0 24.0
12 12 M8
24 2.1
34.0 24.0
12 12 M8
24 2.1
34.0 24.0
12 12 M8
24 2.1
34.0 24.0
12 12 M8
24 2.1
38.0 28.0
12 12 M8
24 2.1
38.0 28.0
12 12 M8
24 2.1
38.0 28.0
12 12 M8
24 2.1
38.0 28.0
12 12 M8
24 2.1
38.0 28.0
12 12 M8
24 2.1
Dimensions in millimeter
d1 >200 on request
* EN 12756
12.01 2015
All technical specifications are based on extensive tests and our many years of
Page 6/6