Documente Academic
Documente Profesional
Documente Cultură
PE‐AOBDV‐3
Automatic Oil Breakdown Voltage Tester
Oil suffers from electrical degradation due to the contaminations and other electrical and mechanical stresses, rendering its
properties ineffective for its intended purpose after long period of operation. Breakdown Voltage testing of Oil is one such means to
detect the voltage at power frequency at which it is likely to cause a flash‐over.
PE‐AOBDV Automatic Oil Breakdown Voltage Tester is a highly precise instrument, which can be applied to measure either the
breakdown voltage or also check the withstanding voltage for a predefined time. Usual available automatic test sets only perform the
former function, but PE‐AOBDV can do both. PE‐AOBDV can measure the breakdown voltage repetitively and computes an average
reading, for a proper decision making. PE‐AOBDV consists of an integrated Oil Cup, HV AC power source
Features
‐ 0‐100 kV smooth operation, 5mA trip current
‐ Complete Automatic operation
‐ Non‐contact magnetic stirring
‐ Programmable Stir, Hold, and Intermediate Stand times
‐ Programmable voltage ramp rate
‐ Repetitive test sequence and average readings
‐ Digital display output
‐ Integrated thermal Printer
‐ Internal memory for data storage and recall
‐ Included IS 6792, IEC 60156, ASTM D877, ASTM D1816 and
GB507‐86 test sequences
‐ Programmable test sequences as per requirement
Specifications
Input/Output
• Power Supply – Single Phase AC 200V‐250V, 50 Hz + 10% (110V 60Hz available on request)
• Voltage output – variable from 0 – 100kV (in steps of 500V)
• Output Voltage accuracy – 1.5%
• Trip Current – 20mA max
Programmable Parameters
• Stirring Time – 0 to 109 secs
• Stationary time – 0 to 10 mins 39 secs
• Voltage Ramp‐up – 0.5kV/sec to 5kV/sec
• Trip Current – 1 to 20 mA, 1mA step
• Sequence Repetition – 1 to 9 times
Measured Parameters
• Breakdown Voltage range – 0.0kV to 100.0kV
• BDV Accuracy – 1.5% of reading + 5 digits
Safety systems
• Interlock for Zero start
• Interlock for HT cover open
• Auto trip and reset
Atmospheric
• Operating Temp – minus 10 deg C to +50 deg C
• Humidity < 75% non‐condensing
Physical
• Size – 450mm(W) × 310mm(D) × 360mm(H)
• Gross Weight – 20kgs (incl accessories), except packing
Standard Accessories
Test equipment – 1 no
Oil vessel with Mushroom Electrodes – 1 set
2.5mm go‐no go gauge – 1 no
Connecting AC mains cable – 1 no
Printer roll – 1 no (already loaded)
User manual – 1 no
Test certificate – 1 no
Warranty Certificate – 1no (Standard warranty 1 yr)
Optional Accessories
Oil vessel with spherical electrodes
Oil vessel with flat cylindrical electrodes
Note – Power Electronical reserves the right to change product specifications for continual improvement. Please order a fresh copy of specs from
contact@powerelectronical.com, before placing new orders. Jurisdiction limits within territory of Republic of India only.
Our other Products are –
• Automatic Cap & Tan Delta test system 10kV / 12kV • 3‐pc Oil Resistivity & DF test kit
• Manual C&DF test system 12kV • Insulation Testers (10M to 15T, 2% accuracy)
• Auto Oil Breakdown Voltage Tester 80kV / 100kV • High Voltage Breakdown testers (10kV‐50kV)
• Motorised Oil BDV set 0‐100kV • SF6 Gas filled Standard Capacitors (upto 1000kV)
D-24, Classic Indl Premises,
PREVENTION is better and cheaper than CURE MIDC Ambad, Nasik – 422010, MH, India.
Tel : +91 253 6602387
Trust the experts!! Fax : +91 253 6602388
Email : contact@powerelectronical.com