Documente Academic
Documente Profesional
Documente Cultură
Characterization
Form supplied
Characteristic data
Property
Value
Unit of measurement
Non-volatile content
(1g/1h/105C)
46 1
Viscosity @ 23C
-1
(D = 186 s )
200 - 1,200
mPas
Value
Unit of measurement
Other data*
Property
Appearance
Yellowish-white, cloudy
Density
approx. 1.10
pH
(Thinned 1:10 with deionized water)
6.8 - 8.5
Dimethylethanolamine
approx. 1
Solvent
g/cm
Method
Method
%
%
Water
approx. 49
approx. 2
N-methyl pyrrolidone
approx. 1
1-methoxypropylacetate-2
approx. 1
*These values provide general information and are not part of the product specification.
Solubility / thinnability
Bayhytherm 3146 can be diluted with water, esters, ketones, alcohols, glycols
and glycol ethers. However, the solutions formed must be tested for their
storage ability.
Compatibility
5140 and VP LS 2310 and also with amino resins such as Cymel 1 303,
328, 370 (Cytec) and Maprenal 1 MF 904. However, the compat- ibility of the
combinations used should always be tested.
page 1 of 3
Document contains important information and must be read in its entirety.
Edition 2014-11-17
Replaces edition dated 2008-02-13
Product Datasheet
BAYHYTHERM 3146
Properties / Applications
Storage
Storage time
The shelf life is three months after receipt of material by customer, under
normal conditions.
page 2 of 3
Document contains important information and must be read in its entirety.
Edition 2014-11-17
Replaces edition dated 2008-02-13
Product Datasheet
BAYHYTHERM 3146
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written
or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative
that you test our products, technical assistance and information to determine to your own satisfaction whether our products, technical assistance and
information are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability
from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree
in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and
technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you
assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical
assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be
construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied
or in fact granted under the claims of any patent.
Editor: Bayer MaterialScience LLC
100 Bayer Road
Pittsburgh, PA 15205-9741
1-800-662-2927
Contact:
CAS Single Point of Contact Office
Tel. 412-777-3983
page 3 of 3
Document contains important information and must be read in its entirety.
Edition 2014-11-17
Replaces edition dated 2008-02-13
Product Datasheet