Documente Academic
Documente Profesional
Documente Cultură
0
on Microsoft Windows Operating Systems
Contents
Minimum Requirements
Install Welding Simulation Suite 2010.0 Applications
Install HP-MPI for PAM-IMPLICIT Solver
Configuring Solver Manager
How to get your FLEXnet License File
Starting the FLEXnet License Server
How to connect to a License Server through the network
Uninstalling Welding Simulation Suite 2010.0 Applications
Trouble Shooting
Minimum Requirements:
Microsoft Windows 32-Bit or 64-Bit Operating Systems:
Microsoft Windows XP Professional SP 2 or 3
Windows 2003 Server
Windows VISTA
Windows 7
It is recommended to perform installation with administrative privileges.
x86 or x64 compatible processors for (Intel, AMD, VIA...).
512 megabytes (MB) of RAM ( 1 or 2 GB recommended)
Disk (free) space required 1.7 GBytes in the Program Files folder for complete installation
/q[n|b|r|f]
The available PROPERTY with Welding Simulation Suite 2010.0 are (sensitive case):
INSTALLDIR="<Path>"
PA=FALSE
If you don't want to install PAM-ASSEMBLY and SYSWELD Solver. Default value is TRUE in MSI table.
FLEX=FALSE
If you don't want to install the FLEXnet licensing toolkit, Default value is TRUE in MSI table.
WP=FALSE
If you don't want to install Weld-Planner and PAM-IMPLICIT Solver. Default value is TRUE in MSI table.
SAMPLE=FALSE
DOC=FALSE
Example:
msiexec /i "<DriveLetter>:\WSSuite2010_Windows\ESI Group Welding Simulation Suite 2010.0.msi"
msiexec /i "<DriveLetter>:\WSSuite2010_Windows\ESI Group Welding Simulation Suite 2010.0.msi" /qb- INSTALLDIR="D:\Program Files\ESI
Group\Welding-Simulation\2010.0" PA=FALSE FLEX=FALSE SAMPLE=FALSE"
where <DriveLetter> corresponds to your CD-ROM/DVD-ROM drive.
Administrative mode:
Open a command prompt (cmd.exe or command.com).
Syntax is : msiexec /a "<Path to MSI setup file>"
When the installation is completed, the Welding Simulation Suite 2010.0 Applications are available in the "Start/Programs/ESI Group" menu and "ESI
Group" directory on your desktop.
DMP 64-Bit IMPLICIT Solver can be run by simply installing HP-MPI on the workstation.
HP-MPI Version 1.1 is available on the root of the installation media in directory HP-MPI-Windows_1.1
Higher version of HP-MPI or now Platform-MPI are compatible, but not validated with PAM-IMPLICIT/VPS 2010.0.1
Solver Manager runs as a service : Shortcut "Install SolverManager as a service" is available after installation of Welding Simulation Suite 2010.0
This shortcut automatically creates a user account called by default pamservice (default password PaM$2010) which is granted with the right to run a
session as a service.
Then the following command line is launched by Setup, which permits Solver Manager to be run under pamservice account :
Command line executed by Setup :
<ProgramFiles>\ESI Group\Welding-Simulation\2010.0\SolverManager\solvermanager.exe -service -user pamservice
solvermanager then runs as a service and is ready to process requests from GUIs. The service is automatically launched at each boot time.
Solver Manager is launched by users in a command shell : No account is required, only a shortcut to the following command line is provided in the
Windows menu Start Menu / Programs / ESI Group / Welding Simulation Suite / 2010.0 / Manage Solver Manager :
Command line executed by Setup : <ProgramFiles>\ESI Group\Welding-Simulation\2010.0\SolverManager\solvermanager.exe -noservice
Send all the information the left part (Hostid Settings) to your local ESI support representative. They will send the license file to you.
Once you have received your license file, it must be moved to the appropriate directory (c:\flexlm) on each machine.
Then see Starting the FLEXnet License Server.
After ESI Software Applications have been installed, your license file must be moved to the appropriate directory, updated and the FLEXnet License Server
started. The pam_lmd.lic is sent separately from the installation. See How to get your FLEXnet License File.
To move and update the license file:
Execute c:\flexlm\lmtools.exe
Select Service/License file and select Configuration using Services (see below)
Select Configure Services, adjust parameters as below and click on Save Service
After completing these installation steps, you may run the ESI Group Applications.
If the license file is modified, the new one must be copied on each computer.
By default, client applications will search licenses in c:\flexlm\pam_lmd.lic .
Another license file can be specified by setting the environment variable PAM_LMD_LICENSE_FILE to the location of the file ( for example
d:\licenses\esi_licence.cry )
port and servername are described in the SERVER line in the license file : SERVER servername hostid port
The license file is updated only on the server, the application inherits of the changes thanks to the environment variable.
After completing these steps, you can safely uninstall Welding Simulation Suite 2010.0 Applications by using the Uninstall icon.
Trouble Shooting
Having problems? You may find the answer here after.
Or
In the Control Panel, under Services check if the FLEXnet License Server is listed as a service. It should be listed as:
FLEXnet License Server
Started
Automatic