Documente Academic
Documente Profesional
Documente Cultură
17. List the parameter that can be determined from the tensile test? (APR/MAY 2010)
18. Mention some of the disadvantage of the Brinell hardness test? (APR/MAY 2010)
19. Classify the different hardness testing methods? (NOV/DEC-2010)
20. Draw the testing sample diagram for impact testing? (NOV/DEC-2010)
21. What is the purpose of spheroidizing heat treatment (NOV/DEC-2010)
22. Define Carburizing? (NOV/DEC-2010)
23. With a simple sketch show the phenomenon of slip in metallic materials?
(APR/MAY 2011)
24. Define creep of metals? (APR/MAY 2011)
PART B
1) Write short notes on compositions and properties of the steels:
i) Austenitic stainless steels
ii) High speed steels
iii) Martensitic stainless steels
iv) Maraging steels
2) How will you classify brasses based on the composition of zinc? Explain the
properties and applications
(MAY/JUNE 2006)
12) Discuss the characteristics of Aluminium and also mention its alloys their
properties and uses?
(APR/MAY 2008)
13) Discuss the influence of each of the following alloying elements on the properties
of steel:
i) Molybdeum
ii) Chromium
iii) Manganeses
iv) Vanadium
v) Titanium
vi) Tungsten
vii) Silicon
14) Give the composition, property and uses of S.G iron, 18-4-1 HSS and Monel
metal (MAY/JUNE 2009)
15) State the composition, properties and uses of bearing alloys. (MAY/JUNE 2009)
(APR/MAY 2010)
(NOV/DEC 2010)
(APR/MAY 2010)
19) Discuss the composition, properties, application --- Stainless steels, Tool steel
(APR/MAY 2010)
20) Discuss the composition, properties, application --- Cupro Nickel, Bronze
(APR/MAY2010)
21) Classify the ferrous material with respect to alloying elements, microstructure and
properties and write the effect of alloying addition in steels ( NOV/DEC 2010)
22) Write a short notes on light weight nonferrous alloys and discuss the aluminium
and its alloy with respect alloying and heat treatments ( NOV/DEC 2010)
23) What are important alloying elements in steels? Discuss the purpose for which
alloying elements are
24) Discuss briefly the different types of cast irons (NOV/DEC 2010)
25) Mention any three copper base alloys. Give the composition, properties,
Application. (NOV/DEC 2010)
26) What are the effects of Si, Ni, Mn and Cr in steel and also in Fe-c diagram?
(APR/MAY 2011)
27) Discuss any two copper base, any two aluminium base alloys. Give at least one
application for each (APR/MAY 2011)